* [PATCH 1/4] ARM: S5PV210: Enable MFC on SMDKV210
2011-12-26 10:00 [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards Sachin Kamat
@ 2011-12-26 10:00 ` Sachin Kamat
2011-12-26 10:00 ` [PATCH 2/4] ARM: S5PV210: Enable MFC on SMDKC110 Sachin Kamat
` (3 subsequent siblings)
4 siblings, 0 replies; 17+ messages in thread
From: Sachin Kamat @ 2011-12-26 10:00 UTC (permalink / raw)
To: linux-samsung-soc; +Cc: sachin.kamat, kgene.kim, patches
This patch adds MFC support on SMDKV210 board.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
arch/arm/mach-s5pv210/Kconfig | 1 +
arch/arm/mach-s5pv210/mach-smdkv210.c | 10 ++++++++++
2 files changed, 11 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 646057a..251491d 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -137,6 +137,7 @@ config MACH_SMDKV210
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S5P_DEV_MFC
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
select SAMSUNG_DEV_IDE
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index 8662ef6..d50cacd 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -46,6 +46,7 @@
#include <plat/s5p-time.h>
#include <plat/backlight.h>
#include <plat/regs-fb-v4.h>
+#include <plat/mfc.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -225,6 +226,9 @@ static struct platform_device *smdkv210_devices[] __initdata = {
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
&s5pv210_device_ac97,
&s5pv210_device_iis0,
&s5pv210_device_spdif,
@@ -284,6 +288,11 @@ static void __init smdkv210_map_io(void)
s5p_set_timer_source(S5P_PWM2, S5P_PWM4);
}
+static void __init smdkv210_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
static void __init smdkv210_machine_init(void)
{
s3c_pm_init();
@@ -319,4 +328,5 @@ MACHINE_START(SMDKV210, "SMDKV210")
.map_io = smdkv210_map_io,
.init_machine = smdkv210_machine_init,
.timer = &s5p_timer,
+ .reserve = &smdkv210_reserve,
MACHINE_END
--
1.7.4.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 2/4] ARM: S5PV210: Enable MFC on SMDKC110
2011-12-26 10:00 [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards Sachin Kamat
2011-12-26 10:00 ` [PATCH 1/4] ARM: S5PV210: Enable MFC on SMDKV210 Sachin Kamat
@ 2011-12-26 10:00 ` Sachin Kamat
2011-12-26 10:00 ` [PATCH 3/4] ARM: S5PV210: Enable FIMC on SMDKV210 Sachin Kamat
` (2 subsequent siblings)
4 siblings, 0 replies; 17+ messages in thread
From: Sachin Kamat @ 2011-12-26 10:00 UTC (permalink / raw)
To: linux-samsung-soc; +Cc: sachin.kamat, kgene.kim, patches
This patch adds MFC support on SMDKC110 board.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
arch/arm/mach-s5pv210/Kconfig | 1 +
arch/arm/mach-s5pv210/mach-smdkc110.c | 11 +++++++++++
2 files changed, 12 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 251491d..32893c7 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -113,6 +113,7 @@ config MACH_SMDKC110
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S5P_DEV_MFC
select SAMSUNG_DEV_IDE
select S5PV210_SETUP_I2C1
select S5PV210_SETUP_I2C2
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index f7266bb..0087c7b 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -31,6 +31,7 @@
#include <plat/iic.h>
#include <plat/pm.h>
#include <plat/s5p-time.h>
+#include <plat/mfc.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define SMDKC110_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
@@ -92,6 +93,9 @@ static struct platform_device *smdkc110_devices[] __initdata = {
&s3c_device_i2c2,
&s3c_device_rtc,
&s3c_device_wdt,
+ &s5p_device_mfc,
+ &s5p_device_mfc_l,
+ &s5p_device_mfc_r,
};
static struct i2c_board_info smdkc110_i2c_devs0[] __initdata = {
@@ -115,6 +119,12 @@ static void __init smdkc110_map_io(void)
s5p_set_timer_source(S5P_PWM3, S5P_PWM4);
}
+static void __init smdkc110_reserve(void)
+{
+ s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
+}
+
+
static void __init smdkc110_machine_init(void)
{
s3c_pm_init();
@@ -141,4 +151,5 @@ MACHINE_START(SMDKC110, "SMDKC110")
.map_io = smdkc110_map_io,
.init_machine = smdkc110_machine_init,
.timer = &s5p_timer,
+ .reserve = &smdkc110_reserve,
MACHINE_END
--
1.7.4.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* [PATCH 3/4] ARM: S5PV210: Enable FIMC on SMDKV210
2011-12-26 10:00 [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards Sachin Kamat
2011-12-26 10:00 ` [PATCH 1/4] ARM: S5PV210: Enable MFC on SMDKV210 Sachin Kamat
2011-12-26 10:00 ` [PATCH 2/4] ARM: S5PV210: Enable MFC on SMDKC110 Sachin Kamat
@ 2011-12-26 10:00 ` Sachin Kamat
2011-12-26 11:54 ` Mark Brown
2011-12-26 16:27 ` Sylwester Nawrocki
2011-12-26 10:00 ` [PATCH 4/4] ARM: S5PV210: Enable FIMC on SMDKC110 Sachin Kamat
2011-12-27 6:09 ` [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards Sachin Kamat
4 siblings, 2 replies; 17+ messages in thread
From: Sachin Kamat @ 2011-12-26 10:00 UTC (permalink / raw)
To: linux-samsung-soc; +Cc: sachin.kamat, kgene.kim, patches
This patch adds support for FIMC 0, 1 and 2 on SMDKV210 board.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
arch/arm/mach-s5pv210/Kconfig | 3 +++
arch/arm/mach-s5pv210/mach-smdkv210.c | 3 +++
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 32893c7..66e1b3d 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -138,6 +138,9 @@ config MACH_SMDKV210
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
select S5P_DEV_MFC
select SAMSUNG_DEV_ADC
select SAMSUNG_DEV_BACKLIGHT
diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
index d50cacd..038fc5f 100644
--- a/arch/arm/mach-s5pv210/mach-smdkv210.c
+++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
@@ -226,6 +226,9 @@ static struct platform_device *smdkv210_devices[] __initdata = {
&s3c_device_rtc,
&s3c_device_ts,
&s3c_device_wdt,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
--
1.7.4.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH 3/4] ARM: S5PV210: Enable FIMC on SMDKV210
2011-12-26 10:00 ` [PATCH 3/4] ARM: S5PV210: Enable FIMC on SMDKV210 Sachin Kamat
@ 2011-12-26 11:54 ` Mark Brown
2011-12-26 12:00 ` Sachin Kamat
2011-12-26 16:27 ` Sylwester Nawrocki
1 sibling, 1 reply; 17+ messages in thread
From: Mark Brown @ 2011-12-26 11:54 UTC (permalink / raw)
To: Sachin Kamat; +Cc: linux-samsung-soc, kgene.kim, patches
On Mon, Dec 26, 2011 at 03:30:12PM +0530, Sachin Kamat wrote:
> This patch adds support for FIMC 0, 1 and 2 on SMDKV210 board.
Why does this not also apply to the Aquilla, Gony and Torbreck machines?
> &s3c_device_wdt,
> + &s5p_device_fimc0,
> + &s5p_device_fimc1,
> + &s5p_device_fimc2,
> &s5p_device_mfc,
The support consists solely of adding them to the lists of devices,
there's no visible per board hookup here.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 3/4] ARM: S5PV210: Enable FIMC on SMDKV210
2011-12-26 11:54 ` Mark Brown
@ 2011-12-26 12:00 ` Sachin Kamat
0 siblings, 0 replies; 17+ messages in thread
From: Sachin Kamat @ 2011-12-26 12:00 UTC (permalink / raw)
To: Mark Brown; +Cc: linux-samsung-soc, kgene.kim, patches
Hi Mark,
Thank you for your review comments.
On 26 December 2011 17:24, Mark Brown
<broonie@opensource.wolfsonmicro.com> wrote:
> On Mon, Dec 26, 2011 at 03:30:12PM +0530, Sachin Kamat wrote:
>> This patch adds support for FIMC 0, 1 and 2 on SMDKV210 board.
>
> Why does this not also apply to the Aquilla, Gony and Torbreck machines?
FIMC is already enabled in Aquila and Goni machines.
I was not sure if it is required in Torbreck.
>
>> &s3c_device_wdt,
>> + &s5p_device_fimc0,
>> + &s5p_device_fimc1,
>> + &s5p_device_fimc2,
>> &s5p_device_mfc,
>
> The support consists solely of adding them to the lists of devices,
> there's no visible per board hookup here.
Yes.
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
With warm regards,
Sachin
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 3/4] ARM: S5PV210: Enable FIMC on SMDKV210
2011-12-26 10:00 ` [PATCH 3/4] ARM: S5PV210: Enable FIMC on SMDKV210 Sachin Kamat
2011-12-26 11:54 ` Mark Brown
@ 2011-12-26 16:27 ` Sylwester Nawrocki
2011-12-26 17:12 ` Sachin Kamat
1 sibling, 1 reply; 17+ messages in thread
From: Sylwester Nawrocki @ 2011-12-26 16:27 UTC (permalink / raw)
To: Sachin Kamat; +Cc: linux-samsung-soc, kgene.kim, patches
Hi Sachin,
thanks for the patch.
On 12/26/2011 11:00 AM, Sachin Kamat wrote:
> This patch adds support for FIMC 0, 1 and 2 on SMDKV210 board.
>
> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
> ---
> arch/arm/mach-s5pv210/Kconfig | 3 +++
> arch/arm/mach-s5pv210/mach-smdkv210.c | 3 +++
> 2 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
> index 32893c7..66e1b3d 100644
> --- a/arch/arm/mach-s5pv210/Kconfig
> +++ b/arch/arm/mach-s5pv210/Kconfig
> @@ -138,6 +138,9 @@ config MACH_SMDKV210
> select S3C_DEV_I2C2
> select S3C_DEV_RTC
> select S3C_DEV_WDT
> + select S5P_DEV_FIMC0
> + select S5P_DEV_FIMC1
> + select S5P_DEV_FIMC2
> select S5P_DEV_MFC
> select SAMSUNG_DEV_ADC
> select SAMSUNG_DEV_BACKLIGHT
> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
> index d50cacd..038fc5f 100644
> --- a/arch/arm/mach-s5pv210/mach-smdkv210.c
> +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
> @@ -226,6 +226,9 @@ static struct platform_device *smdkv210_devices[] __initdata = {
> &s3c_device_rtc,
> &s3c_device_ts,
> &s3c_device_wdt,
> + &s5p_device_fimc0,
> + &s5p_device_fimc1,
> + &s5p_device_fimc2,
Sorry, this won't work, unless you add &s5p_device_fimc_md after all
s5p_fimc_device? entries. s5p_device_fimc_md is a platform device for
FIMC media device driver (/dev/media?), which registers all required
video nodes (mem-to-mem and video capture).
Complete board code for FIMC can be found in Goni (or Nuri) board files.
Does the above really work for you with 3.2-rc7 kernel ?
I've had prepared a patch adding s5p_device_fimc_md for the SMDK boards
that already register FIMC devices, but got distracted by other tasks
and finally I didn't send it for 3.2 :(
BTW, is there anyone interested in s3c64xx (s3c24xx) CAMIF v4l2 driver
in the mainline kernel ? I've started some works on it and could carry on
with that if there is some interest, so we can have something which
is in line with the mainline APIs.
--
Thanks,
Sylwester
^ permalink raw reply [flat|nested] 17+ messages in thread* Re: [PATCH 3/4] ARM: S5PV210: Enable FIMC on SMDKV210
2011-12-26 16:27 ` Sylwester Nawrocki
@ 2011-12-26 17:12 ` Sachin Kamat
0 siblings, 0 replies; 17+ messages in thread
From: Sachin Kamat @ 2011-12-26 17:12 UTC (permalink / raw)
To: Sylwester Nawrocki; +Cc: linux-samsung-soc, kgene.kim, patches
Hi Sylwester,
Thank you for your comments.
I did check Goni code and found that there was s5p_device_fimc_md device added.
But I could n't find much description about it and also initial
version did not have it enabled, hence I did not include it.
I will re-submit the patch after adding s5p_device_fimc_md in the device list.
Thanks and regards
Sachin
On 26 December 2011 21:57, Sylwester Nawrocki <snjw23@gmail.com> wrote:
> Hi Sachin,
>
> thanks for the patch.
>
> On 12/26/2011 11:00 AM, Sachin Kamat wrote:
>> This patch adds support for FIMC 0, 1 and 2 on SMDKV210 board.
>>
>> Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
>> ---
>> arch/arm/mach-s5pv210/Kconfig | 3 +++
>> arch/arm/mach-s5pv210/mach-smdkv210.c | 3 +++
>> 2 files changed, 6 insertions(+), 0 deletions(-)
>>
>> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
>> index 32893c7..66e1b3d 100644
>> --- a/arch/arm/mach-s5pv210/Kconfig
>> +++ b/arch/arm/mach-s5pv210/Kconfig
>> @@ -138,6 +138,9 @@ config MACH_SMDKV210
>> select S3C_DEV_I2C2
>> select S3C_DEV_RTC
>> select S3C_DEV_WDT
>> + select S5P_DEV_FIMC0
>> + select S5P_DEV_FIMC1
>> + select S5P_DEV_FIMC2
>> select S5P_DEV_MFC
>> select SAMSUNG_DEV_ADC
>> select SAMSUNG_DEV_BACKLIGHT
>> diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c
>> index d50cacd..038fc5f 100644
>> --- a/arch/arm/mach-s5pv210/mach-smdkv210.c
>> +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c
>> @@ -226,6 +226,9 @@ static struct platform_device *smdkv210_devices[] __initdata = {
>> &s3c_device_rtc,
>> &s3c_device_ts,
>> &s3c_device_wdt,
>> + &s5p_device_fimc0,
>> + &s5p_device_fimc1,
>> + &s5p_device_fimc2,
>
> Sorry, this won't work, unless you add &s5p_device_fimc_md after all
> s5p_fimc_device? entries. s5p_device_fimc_md is a platform device for
> FIMC media device driver (/dev/media?), which registers all required
> video nodes (mem-to-mem and video capture).
> Complete board code for FIMC can be found in Goni (or Nuri) board files.
>
> Does the above really work for you with 3.2-rc7 kernel ?
>
> I've had prepared a patch adding s5p_device_fimc_md for the SMDK boards
> that already register FIMC devices, but got distracted by other tasks
> and finally I didn't send it for 3.2 :(
>
> BTW, is there anyone interested in s3c64xx (s3c24xx) CAMIF v4l2 driver
> in the mainline kernel ? I've started some works on it and could carry on
> with that if there is some interest, so we can have something which
> is in line with the mainline APIs.
>
> --
>
> Thanks,
> Sylwester
--
With warm regards,
Sachin
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 4/4] ARM: S5PV210: Enable FIMC on SMDKC110
2011-12-26 10:00 [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards Sachin Kamat
` (2 preceding siblings ...)
2011-12-26 10:00 ` [PATCH 3/4] ARM: S5PV210: Enable FIMC on SMDKV210 Sachin Kamat
@ 2011-12-26 10:00 ` Sachin Kamat
2011-12-27 6:09 ` [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards Sachin Kamat
4 siblings, 0 replies; 17+ messages in thread
From: Sachin Kamat @ 2011-12-26 10:00 UTC (permalink / raw)
To: linux-samsung-soc; +Cc: sachin.kamat, kgene.kim, patches
This patch adds support for FIMC 0, 1 & 2 on SMDKC110 board.
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
---
arch/arm/mach-s5pv210/Kconfig | 3 +++
arch/arm/mach-s5pv210/mach-smdkc110.c | 3 +++
2 files changed, 6 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 66e1b3d..eb31498 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -113,6 +113,9 @@ config MACH_SMDKC110
select S3C_DEV_I2C2
select S3C_DEV_RTC
select S3C_DEV_WDT
+ select S5P_DEV_FIMC0
+ select S5P_DEV_FIMC1
+ select S5P_DEV_FIMC2
select S5P_DEV_MFC
select SAMSUNG_DEV_IDE
select S5PV210_SETUP_I2C1
diff --git a/arch/arm/mach-s5pv210/mach-smdkc110.c b/arch/arm/mach-s5pv210/mach-smdkc110.c
index 0087c7b..59757b6 100644
--- a/arch/arm/mach-s5pv210/mach-smdkc110.c
+++ b/arch/arm/mach-s5pv210/mach-smdkc110.c
@@ -93,6 +93,9 @@ static struct platform_device *smdkc110_devices[] __initdata = {
&s3c_device_i2c2,
&s3c_device_rtc,
&s3c_device_wdt,
+ &s5p_device_fimc0,
+ &s5p_device_fimc1,
+ &s5p_device_fimc2,
&s5p_device_mfc,
&s5p_device_mfc_l,
&s5p_device_mfc_r,
--
1.7.4.1
^ permalink raw reply related [flat|nested] 17+ messages in thread* Re: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards
2011-12-26 10:00 [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards Sachin Kamat
` (3 preceding siblings ...)
2011-12-26 10:00 ` [PATCH 4/4] ARM: S5PV210: Enable FIMC on SMDKC110 Sachin Kamat
@ 2011-12-27 6:09 ` Sachin Kamat
2011-12-29 3:34 ` Kukjin Kim
4 siblings, 1 reply; 17+ messages in thread
From: Sachin Kamat @ 2011-12-27 6:09 UTC (permalink / raw)
To: linux-samsung-soc; +Cc: kgene.kim
Hi Kukjin,
Please pick up the MFC patches (patches 1 & 2) from this series. I
will post a separate patch series for FIMC related changes.
Regards
Sachin
On 26 December 2011 15:30, Sachin Kamat <sachin.kamat@linaro.org> wrote:
> This patch series adds support for MFC and FIMC on SMDK C110 and V210 boards.
> It is based on Kukjin Kim's latest for-next branch.
>
> Sachin Kamat (4):
> ARM: S5PV210: Enable MFC on SMDKV210
> ARM: S5PV210: Enable MFC on SMDKC110
> ARM: S5PV210: Enable FIMC on SMDKV210
> ARM: S5PV210: Enable FIMC on SMDKC110
>
> arch/arm/mach-s5pv210/Kconfig | 8 ++++++++
> arch/arm/mach-s5pv210/mach-smdkc110.c | 14 ++++++++++++++
> arch/arm/mach-s5pv210/mach-smdkv210.c | 13 +++++++++++++
> 3 files changed, 35 insertions(+), 0 deletions(-)
>
> --
> 1.7.4.1
>
--
With warm regards,
Sachin
^ permalink raw reply [flat|nested] 17+ messages in thread* RE: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards
2011-12-27 6:09 ` [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards Sachin Kamat
@ 2011-12-29 3:34 ` Kukjin Kim
2012-01-09 23:18 ` Jeongtae Park
0 siblings, 1 reply; 17+ messages in thread
From: Kukjin Kim @ 2011-12-29 3:34 UTC (permalink / raw)
To: 'Sachin Kamat', linux-samsung-soc; +Cc: jtp.park
Sachin Kamat wrote:
>
> Hi Kukjin,
>
> Please pick up the MFC patches (patches 1 & 2) from this series. I
> will post a separate patch series for FIMC related changes.
>
(Cc'ed Jeongtae Park)
Jeongtae, let me know your opinion on this MFC enabling patches.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
> Regards
> Sachin
>
> On 26 December 2011 15:30, Sachin Kamat <sachin.kamat@linaro.org> wrote:
> > This patch series adds support for MFC and FIMC on SMDK C110 and V210
> boards.
> > It is based on Kukjin Kim's latest for-next branch.
> >
> > Sachin Kamat (4):
> > ARM: S5PV210: Enable MFC on SMDKV210
> > ARM: S5PV210: Enable MFC on SMDKC110
> > ARM: S5PV210: Enable FIMC on SMDKV210
> > ARM: S5PV210: Enable FIMC on SMDKC110
> >
> > arch/arm/mach-s5pv210/Kconfig | 8 ++++++++
> > arch/arm/mach-s5pv210/mach-smdkc110.c | 14 ++++++++++++++
> > arch/arm/mach-s5pv210/mach-smdkv210.c | 13 +++++++++++++
> > 3 files changed, 35 insertions(+), 0 deletions(-)
> >
> > --
> > 1.7.4.1
> >
>
>
>
> --
> With warm regards,
> Sachin
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards
2011-12-29 3:34 ` Kukjin Kim
@ 2012-01-09 23:18 ` Jeongtae Park
2012-01-30 5:15 ` Sachin Kamat
0 siblings, 1 reply; 17+ messages in thread
From: Jeongtae Park @ 2012-01-09 23:18 UTC (permalink / raw)
To: linux-samsung-soc, sachin.kamat, 'Kukjin Kim'
Cc: 'Kamil Debski'
Hi Sachin,
thanks for the patch.
There is no issue for MFC.
Best regards,
/jtpark
> -----Original Message-----
> From: Kukjin Kim [mailto:kgene.kim@samsung.com]
> Sent: Thursday, December 29, 2011 12:35 PM
> To: 'Sachin Kamat'; linux-samsung-soc@vger.kernel.org
> Cc: jtp.park@samsung.com
> Subject: RE: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards
>
> Sachin Kamat wrote:
> >
> > Hi Kukjin,
> >
> > Please pick up the MFC patches (patches 1 & 2) from this series. I
> > will post a separate patch series for FIMC related changes.
> >
> (Cc'ed Jeongtae Park)
>
> Jeongtae, let me know your opinion on this MFC enabling patches.
>
> Thanks.
>
> Best regards,
> Kgene.
> --
> Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
>
> > Regards
> > Sachin
> >
> > On 26 December 2011 15:30, Sachin Kamat <sachin.kamat@linaro.org> wrote:
> > > This patch series adds support for MFC and FIMC on SMDK C110 and V210
> > boards.
> > > It is based on Kukjin Kim's latest for-next branch.
> > >
> > > Sachin Kamat (4):
> > > ARM: S5PV210: Enable MFC on SMDKV210
> > > ARM: S5PV210: Enable MFC on SMDKC110
> > > ARM: S5PV210: Enable FIMC on SMDKV210
> > > ARM: S5PV210: Enable FIMC on SMDKC110
> > >
> > > arch/arm/mach-s5pv210/Kconfig | 8 ++++++++
> > > arch/arm/mach-s5pv210/mach-smdkc110.c | 14 ++++++++++++++
> > > arch/arm/mach-s5pv210/mach-smdkv210.c | 13 +++++++++++++
> > > 3 files changed, 35 insertions(+), 0 deletions(-)
> > >
> > > --
> > > 1.7.4.1
> > >
> >
> >
> >
> > --
> > With warm regards,
> > Sachin
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards
2012-01-09 23:18 ` Jeongtae Park
@ 2012-01-30 5:15 ` Sachin Kamat
2012-01-31 4:17 ` Kukjin Kim
0 siblings, 1 reply; 17+ messages in thread
From: Sachin Kamat @ 2012-01-30 5:15 UTC (permalink / raw)
To: jtp.park, Kukjin Kim; +Cc: linux-samsung-soc
Hi Kukjin,
Ping.
On 10 January 2012 04:48, Jeongtae Park <jtp.park@samsung.com> wrote:
> Hi Sachin,
>
> thanks for the patch.
> There is no issue for MFC.
>
> Best regards,
> /jtpark
>
>> -----Original Message-----
>> From: Kukjin Kim [mailto:kgene.kim@samsung.com]
>> Sent: Thursday, December 29, 2011 12:35 PM
>> To: 'Sachin Kamat'; linux-samsung-soc@vger.kernel.org
>> Cc: jtp.park@samsung.com
>> Subject: RE: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards
>>
>> Sachin Kamat wrote:
>> >
>> > Hi Kukjin,
>> >
>> > Please pick up the MFC patches (patches 1 & 2) from this series. I
>> > will post a separate patch series for FIMC related changes.
>> >
>> (Cc'ed Jeongtae Park)
>>
>> Jeongtae, let me know your opinion on this MFC enabling patches.
>>
>> Thanks.
>>
>> Best regards,
>> Kgene.
>> --
>> Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
>> SW Solution Development Team, Samsung Electronics Co., Ltd.
>>
>> > Regards
>> > Sachin
>> >
>> > On 26 December 2011 15:30, Sachin Kamat <sachin.kamat@linaro.org> wrote:
>> > > This patch series adds support for MFC and FIMC on SMDK C110 and V210
>> > boards.
>> > > It is based on Kukjin Kim's latest for-next branch.
>> > >
>> > > Sachin Kamat (4):
>> > > ARM: S5PV210: Enable MFC on SMDKV210
>> > > ARM: S5PV210: Enable MFC on SMDKC110
>> > > ARM: S5PV210: Enable FIMC on SMDKV210
>> > > ARM: S5PV210: Enable FIMC on SMDKC110
>> > >
>> > > arch/arm/mach-s5pv210/Kconfig | 8 ++++++++
>> > > arch/arm/mach-s5pv210/mach-smdkc110.c | 14 ++++++++++++++
>> > > arch/arm/mach-s5pv210/mach-smdkv210.c | 13 +++++++++++++
>> > > 3 files changed, 35 insertions(+), 0 deletions(-)
>> > >
>> > > --
>> > > 1.7.4.1
>> > >
>> >
>> >
>> >
>> > --
>> > With warm regards,
>> > Sachin
>
--
With warm regards,
Sachin
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards
2012-01-30 5:15 ` Sachin Kamat
@ 2012-01-31 4:17 ` Kukjin Kim
2012-01-31 5:15 ` Sachin Kamat
0 siblings, 1 reply; 17+ messages in thread
From: Kukjin Kim @ 2012-01-31 4:17 UTC (permalink / raw)
To: Sachin Kamat; +Cc: jtp.park, Kukjin Kim, linux-samsung-soc
On 01/30/12 14:15, Sachin Kamat wrote:
> Hi Kukjin,
>
> Ping.
>
Hi Sachin,
I looked at your reply on Sylwester's comments, PATCH 3/4.
I'd like to apply all of this series after your re-submitting.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
>
> On 10 January 2012 04:48, Jeongtae Park<jtp.park@samsung.com> wrote:
>> Hi Sachin,
>>
>> thanks for the patch.
>> There is no issue for MFC.
>>
>> Best regards,
>> /jtpark
>>
>>> -----Original Message-----
>>> From: Kukjin Kim [mailto:kgene.kim@samsung.com]
>>> Sent: Thursday, December 29, 2011 12:35 PM
>>> To: 'Sachin Kamat'; linux-samsung-soc@vger.kernel.org
>>> Cc: jtp.park@samsung.com
>>> Subject: RE: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards
>>>
>>> Sachin Kamat wrote:
>>>>
>>>> Hi Kukjin,
>>>>
>>>> Please pick up the MFC patches (patches 1& 2) from this series. I
>>>> will post a separate patch series for FIMC related changes.
>>>>
>>> (Cc'ed Jeongtae Park)
>>>
>>> Jeongtae, let me know your opinion on this MFC enabling patches.
>>>
>>> Thanks.
>>>
>>> Best regards,
>>> Kgene.
>>> --
>>> Kukjin Kim<kgene.kim@samsung.com>, Senior Engineer,
>>> SW Solution Development Team, Samsung Electronics Co., Ltd.
>>>
>>>> Regards
>>>> Sachin
>>>>
>>>> On 26 December 2011 15:30, Sachin Kamat<sachin.kamat@linaro.org> wrote:
>>>>> This patch series adds support for MFC and FIMC on SMDK C110 and V210
>>>> boards.
>>>>> It is based on Kukjin Kim's latest for-next branch.
>>>>>
>>>>> Sachin Kamat (4):
>>>>> ARM: S5PV210: Enable MFC on SMDKV210
>>>>> ARM: S5PV210: Enable MFC on SMDKC110
>>>>> ARM: S5PV210: Enable FIMC on SMDKV210
>>>>> ARM: S5PV210: Enable FIMC on SMDKC110
>>>>>
>>>>> arch/arm/mach-s5pv210/Kconfig | 8 ++++++++
>>>>> arch/arm/mach-s5pv210/mach-smdkc110.c | 14 ++++++++++++++
>>>>> arch/arm/mach-s5pv210/mach-smdkv210.c | 13 +++++++++++++
>>>>> 3 files changed, 35 insertions(+), 0 deletions(-)
>>>>>
>>>>> --
>>>>> 1.7.4.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards
2012-01-31 4:17 ` Kukjin Kim
@ 2012-01-31 5:15 ` Sachin Kamat
2012-02-09 13:27 ` Kukjin Kim
0 siblings, 1 reply; 17+ messages in thread
From: Sachin Kamat @ 2012-01-31 5:15 UTC (permalink / raw)
To: Kukjin Kim; +Cc: jtp.park, linux-samsung-soc
Hi Kukjin,
On 31 January 2012 09:47, Kukjin Kim <kgene.kim@samsung.com> wrote:
> On 01/30/12 14:15, Sachin Kamat wrote:
>>
>> Hi Kukjin,
>>
>> Ping.
>>
> Hi Sachin,
>
> I looked at your reply on Sylwester's comments, PATCH 3/4.
> I'd like to apply all of this series after your re-submitting.
I have already re-submitted patches 3 and 4 incorporating Sylwester's comments.
Please let me know if you want me to send them once again.
Regards
Sachin
>
>
> Thanks.
>
> Best regards,
> Kgene.
> --
> Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
>
>>
>> On 10 January 2012 04:48, Jeongtae Park<jtp.park@samsung.com> wrote:
>>>
>>> Hi Sachin,
>>>
>>> thanks for the patch.
>>> There is no issue for MFC.
>>>
>>> Best regards,
>>> /jtpark
>>>
>>>> -----Original Message-----
>>>> From: Kukjin Kim [mailto:kgene.kim@samsung.com]
>>>> Sent: Thursday, December 29, 2011 12:35 PM
>>>> To: 'Sachin Kamat'; linux-samsung-soc@vger.kernel.org
>>>> Cc: jtp.park@samsung.com
>>>> Subject: RE: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110
>>>> and V210 boards
>>>>
>>>> Sachin Kamat wrote:
>>>>>
>>>>>
>>>>> Hi Kukjin,
>>>>>
>>>>> Please pick up the MFC patches (patches 1& 2) from this series. I
>>>>>
>>>>> will post a separate patch series for FIMC related changes.
>>>>>
>>>> (Cc'ed Jeongtae Park)
>>>>
>>>> Jeongtae, let me know your opinion on this MFC enabling patches.
>>>>
>>>> Thanks.
>>>>
>>>> Best regards,
>>>> Kgene.
>>>> --
>>>> Kukjin Kim<kgene.kim@samsung.com>, Senior Engineer,
>>>> SW Solution Development Team, Samsung Electronics Co., Ltd.
>>>>
>>>>> Regards
>>>>> Sachin
>>>>>
>>>>> On 26 December 2011 15:30, Sachin Kamat<sachin.kamat@linaro.org>
>>>>> wrote:
>>>>>>
>>>>>> This patch series adds support for MFC and FIMC on SMDK C110 and V210
>>>>>
>>>>> boards.
>>>>>>
>>>>>> It is based on Kukjin Kim's latest for-next branch.
>>>>>>
>>>>>> Sachin Kamat (4):
>>>>>> ARM: S5PV210: Enable MFC on SMDKV210
>>>>>> ARM: S5PV210: Enable MFC on SMDKC110
>>>>>> ARM: S5PV210: Enable FIMC on SMDKV210
>>>>>> ARM: S5PV210: Enable FIMC on SMDKC110
>>>>>>
>>>>>> arch/arm/mach-s5pv210/Kconfig | 8 ++++++++
>>>>>> arch/arm/mach-s5pv210/mach-smdkc110.c | 14 ++++++++++++++
>>>>>> arch/arm/mach-s5pv210/mach-smdkv210.c | 13 +++++++++++++
>>>>>> 3 files changed, 35 insertions(+), 0 deletions(-)
>>>>>>
>>>>>> --
>>>>>> 1.7.4.1
--
With warm regards,
Sachin
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards
2012-01-31 5:15 ` Sachin Kamat
@ 2012-02-09 13:27 ` Kukjin Kim
2012-02-13 5:27 ` Sachin Kamat
0 siblings, 1 reply; 17+ messages in thread
From: Kukjin Kim @ 2012-02-09 13:27 UTC (permalink / raw)
To: 'Sachin Kamat'; +Cc: jtp.park, linux-samsung-soc
Sachin Kamat wrote:
>
> Hi Kukjin,
>
Hi,
>
> On 31 January 2012 09:47, Kukjin Kim <kgene.kim@samsung.com> wrote:
> > On 01/30/12 14:15, Sachin Kamat wrote:
> >>
> >> Hi Kukjin,
> >>
> >> Ping.
> >>
> > Hi Sachin,
> >
> > I looked at your reply on Sylwester's comments, PATCH 3/4.
> > I'd like to apply all of this series after your re-submitting.
>
>
> I have already re-submitted patches 3 and 4 incorporating Sylwester's
> comments.
>
Would be helpful to me if you could add the mark of version in the re-submit
patch.
> Please let me know if you want me to send them once again.
>
Yes, please.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 0/4] ARM: S5PV210: Enable FIMC and MFC on SMDK C110 and V210 boards
2012-02-09 13:27 ` Kukjin Kim
@ 2012-02-13 5:27 ` Sachin Kamat
0 siblings, 0 replies; 17+ messages in thread
From: Sachin Kamat @ 2012-02-13 5:27 UTC (permalink / raw)
To: Kukjin Kim; +Cc: jtp.park, linux-samsung-soc
Hi Kukjin,
On 9 February 2012 18:57, Kukjin Kim <kgene.kim@samsung.com> wrote:
> Sachin Kamat wrote:
>>
>> Hi Kukjin,
>>
> Hi,
>>
>> On 31 January 2012 09:47, Kukjin Kim <kgene.kim@samsung.com> wrote:
>> > On 01/30/12 14:15, Sachin Kamat wrote:
>> >>
>> >> Hi Kukjin,
>> >>
>> >> Ping.
>> >>
>> > Hi Sachin,
>> >
>> > I looked at your reply on Sylwester's comments, PATCH 3/4.
>> > I'd like to apply all of this series after your re-submitting.
>>
>>
>> I have already re-submitted patches 3 and 4 incorporating Sylwester's
>> comments.
>>
> Would be helpful to me if you could add the mark of version in the re-submit
> patch.
>
>> Please let me know if you want me to send them once again.
>>
> Yes, please.
Re-sent the patch series "[PATCH-RESEND 0/4] ARM: S5PV210: Enable FIMC
& MFC on SMDKC110 & V210 boards"
rebased on your next/board-samsung branch.
>
> Thanks.
>
> Best regards,
> Kgene.
> --
> Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
> SW Solution Development Team, Samsung Electronics Co., Ltd.
>
--
With warm regards,
Sachin
^ permalink raw reply [flat|nested] 17+ messages in thread