From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] at91: at91sam9x5 family basic support
Date: Fri, 03 Feb 2012 15:54:10 +0100 [thread overview]
Message-ID: <4F2BF512.4020602@atmel.com> (raw)
Hi,
Here is the pull request for inclusion of at91sam9x5 family basic support.
I add the cover letter of the patch series that I sent some time ago:
The at91sam9x5 family is an ARM926 based SoC family from Atmel.
five different products are available: sam9g15, sam9g25, sam9g35 sam9x25 and sam9x35.
Evaluation Kits are composed of a CPU Module and a carrier board (with optional screen).
The use of the Device Tree is reducing the amount of code needed for an AT91 based SoC: sam9x5 are the first AT91 SoC that only rely on DT for their hardware configuration.
This pull request goes on top of the at91-3.4-base branch.
The following changes since commit 9918ceafd4a9e013572e03983f528017c29bb1cb:
ARM: at91: code removal of CAP9 SoC (2012-02-03 13:33:05 +0100)
are available in the git repository at:
git://github.com/at91linux/linux-at91.git at91-3.4-base+9x5
Dan Liang (2):
ARM: at91/at91sam9x5: overall definition
ARM: at91/at91sam9x5: SoC basic support
Nicolas Ferre (4):
ARM: at91/at91sam9x5: PMC header file
ARM: at91/at91sam9x5: clock management for at91sam9x5 chip family
ARM: at91/at91sam9x5: Configuration and Makefile
ARM: at91/at91sam9x5: Device tree definition files
arch/arm/boot/dts/at91sam9g25ek.dts | 37 ++
arch/arm/boot/dts/at91sam9x5.dtsi | 172 +++++++++
arch/arm/boot/dts/at91sam9x5cm.dtsi | 14 +
arch/arm/mach-at91/Kconfig | 9 +
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/at91sam9x5.c | 373 ++++++++++++++++++++
arch/arm/mach-at91/board-dt.c | 1 +
arch/arm/mach-at91/clock.c | 83 ++++-
arch/arm/mach-at91/include/mach/at91_pmc.h | 60 +++-
arch/arm/mach-at91/include/mach/at91sam9x5.h | 80 +++++
.../arm/mach-at91/include/mach/at91sam9x5_matrix.h | 53 +++
arch/arm/mach-at91/include/mach/hardware.h | 2 +
12 files changed, 854 insertions(+), 31 deletions(-)
create mode 100644 arch/arm/boot/dts/at91sam9g25ek.dts
create mode 100644 arch/arm/boot/dts/at91sam9x5.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9x5cm.dtsi
create mode 100644 arch/arm/mach-at91/at91sam9x5.c
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5.h
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
Thanks, best regards,
--
Nicolas Ferre
WARNING: multiple messages have this Message-ID (diff)
From: Nicolas Ferre <nicolas.ferre@atmel.com>
To: Arnd Bergmann <arnd@arndb.de>, Olof Johansson <olof@lixom.net>,
linux-arm-kernel <linux-arm-kernel@lists.infradead.org>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>,
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>,
Linux Kernel list <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] at91: at91sam9x5 family basic support
Date: Fri, 03 Feb 2012 15:54:10 +0100 [thread overview]
Message-ID: <4F2BF512.4020602@atmel.com> (raw)
Hi,
Here is the pull request for inclusion of at91sam9x5 family basic support.
I add the cover letter of the patch series that I sent some time ago:
The at91sam9x5 family is an ARM926 based SoC family from Atmel.
five different products are available: sam9g15, sam9g25, sam9g35 sam9x25 and sam9x35.
Evaluation Kits are composed of a CPU Module and a carrier board (with optional screen).
The use of the Device Tree is reducing the amount of code needed for an AT91 based SoC: sam9x5 are the first AT91 SoC that only rely on DT for their hardware configuration.
This pull request goes on top of the at91-3.4-base branch.
The following changes since commit 9918ceafd4a9e013572e03983f528017c29bb1cb:
ARM: at91: code removal of CAP9 SoC (2012-02-03 13:33:05 +0100)
are available in the git repository at:
git://github.com/at91linux/linux-at91.git at91-3.4-base+9x5
Dan Liang (2):
ARM: at91/at91sam9x5: overall definition
ARM: at91/at91sam9x5: SoC basic support
Nicolas Ferre (4):
ARM: at91/at91sam9x5: PMC header file
ARM: at91/at91sam9x5: clock management for at91sam9x5 chip family
ARM: at91/at91sam9x5: Configuration and Makefile
ARM: at91/at91sam9x5: Device tree definition files
arch/arm/boot/dts/at91sam9g25ek.dts | 37 ++
arch/arm/boot/dts/at91sam9x5.dtsi | 172 +++++++++
arch/arm/boot/dts/at91sam9x5cm.dtsi | 14 +
arch/arm/mach-at91/Kconfig | 9 +
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/at91sam9x5.c | 373 ++++++++++++++++++++
arch/arm/mach-at91/board-dt.c | 1 +
arch/arm/mach-at91/clock.c | 83 ++++-
arch/arm/mach-at91/include/mach/at91_pmc.h | 60 +++-
arch/arm/mach-at91/include/mach/at91sam9x5.h | 80 +++++
.../arm/mach-at91/include/mach/at91sam9x5_matrix.h | 53 +++
arch/arm/mach-at91/include/mach/hardware.h | 2 +
12 files changed, 854 insertions(+), 31 deletions(-)
create mode 100644 arch/arm/boot/dts/at91sam9g25ek.dts
create mode 100644 arch/arm/boot/dts/at91sam9x5.dtsi
create mode 100644 arch/arm/boot/dts/at91sam9x5cm.dtsi
create mode 100644 arch/arm/mach-at91/at91sam9x5.c
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5.h
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
Thanks, best regards,
--
Nicolas Ferre
next reply other threads:[~2012-02-03 14:54 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-03 14:54 Nicolas Ferre [this message]
2012-02-03 14:54 ` [GIT PULL] at91: at91sam9x5 family basic support Nicolas Ferre
2012-02-09 1:14 ` Olof Johansson
2012-02-09 1:14 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F2BF512.4020602@atmel.com \
--to=nicolas.ferre@atmel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.