From: Stephane Grosjean <s.grosjean@peak-system.com>
To: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>,
Oliver Hartkopp <socketcan@hartkopp.net>,
"linux-can@vger.kernel.org" <linux-can@vger.kernel.org>
Subject: Re: [PATCH v4.1] can/sja1000: add support for PEAK-System PCMCIA card
Date: Fri, 17 Feb 2012 15:19:03 +0100 [thread overview]
Message-ID: <4F3E61D7.1040208@peak-system.com> (raw)
In-Reply-To: <4F3E58E4.3030407@volkswagen.de>
Le 17/02/2012 14:40, Oliver Hartkopp a écrit :
>
> The only remaining issue with PEAK PCIeC is the locking warning about the
> PCIeC LED timer lock (&card->led_timer) when i enable and start the
> interface
> under CAN load. I do have a peak_pci v5 driver here - but in v6 only
> changed
> the device_id table right?
Yes, mainly.
>
> To get this problem you need to connect the PCIeC to a CAN bus which
> is already having CAN traffic between at least two functional nodes.
>
Does this issue always occurs, each time you configure the interface?..
Especially with the "new" sja1000.ko?
Thanks and regards,
Stéphane
--
PEAK-System Technik GmbH, Otto-Roehm-Strasse 69, D-64293 Darmstadt
Geschaeftsleitung: A.Gach/U.Wilhelm,St.Nr.:007/241/13586 FA Darmstadt
HRB-9183 Darmstadt, Ust.IdNr.:DE 202220078, WEE-Reg.-Nr.: DE39305391
Tel.+49 (0)6151-817320 / Fax:+49 (0)6151-817329, info@peak-system.com
next prev parent reply other threads:[~2012-02-17 14:19 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-16 10:10 [PATCH v4.1] can/sja1000: add support for PEAK-System PCMCIA card Stephane Grosjean
2012-02-17 8:24 ` Dominik Brodowski
2012-02-17 9:21 ` Stephane Grosjean
2012-02-17 9:36 ` Marc Kleine-Budde
2012-02-17 13:40 ` Oliver Hartkopp
2012-02-17 14:19 ` Stephane Grosjean [this message]
2012-02-17 14:40 ` Oliver Hartkopp
2012-02-17 14:47 ` Stephane Grosjean
-- strict thread matches above, loose matches on Subject: below --
2012-02-13 14:18 Stephane Grosjean
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F3E61D7.1040208@peak-system.com \
--to=s.grosjean@peak-system.com \
--cc=linux-can@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=oliver.hartkopp@volkswagen.de \
--cc=socketcan@hartkopp.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.