* [PATCH 0/3] lsbtest: Add recipe for LSB tests and automate test
@ 2012-02-17 7:04 Yi Zhao
2012-02-17 7:04 ` [PATCH 1/3] " Yi Zhao
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Yi Zhao @ 2012-02-17 7:04 UTC (permalink / raw)
To: openembedded-core
Hi,
The pull request is to address [YOCTO #1567] - "Add recipe for lsb tests and automate test".
LSB testing is different from LTP or POSIX testing. We don't need to build the cases from sources but need to install a set of pre-build binary packages in lsb image.
I add a script and 2 list files in this recipe. The script is used for setting up lsb test environment, download lsb rpm packages from remote, install packages, execute the test and collect the results.
When run this script in the target, the lsb will be downloaded, installed and executed automatically.
The following changes since commit 41a83ccfe50ec69425a4828fb5836d38d3f99e67:
guile: fix cross configure failure (2012-02-10 17:01:42 +0000)
are available in the git repository at:
git://git.pokylinux.org/poky-contrib yizhao/bug1567
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=yizhao/bug1567
Yi Zhao (3):
lsbtest: Add recipe for LSB tests and automate test
distro_tracking_fields: add information for lsbtest
task-core-lsb: add lsbtest to RDEPENDS_task-core-misc list
.../conf/distro/include/distro_tracking_fields.inc | 4 +
meta/recipes-extended/lsb/lsbtest/LSB_Test.sh | 493 ++++++++++++++++++++
meta/recipes-extended/lsb/lsbtest/packages_list | 50 ++
meta/recipes-extended/lsb/lsbtest/session | 194 ++++++++
meta/recipes-extended/lsb/lsbtest_1.0.bb | 36 ++
meta/recipes-extended/tasks/task-core-lsb.bb | 3 +-
6 files changed, 779 insertions(+), 1 deletions(-)
create mode 100644 meta/recipes-extended/lsb/lsbtest/LSB_Test.sh
create mode 100644 meta/recipes-extended/lsb/lsbtest/packages_list
create mode 100644 meta/recipes-extended/lsb/lsbtest/session
create mode 100644 meta/recipes-extended/lsb/lsbtest_1.0.bb
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH 1/3] lsbtest: Add recipe for LSB tests and automate test 2012-02-17 7:04 [PATCH 0/3] lsbtest: Add recipe for LSB tests and automate test Yi Zhao @ 2012-02-17 7:04 ` Yi Zhao 2012-02-21 20:09 ` Saul Wold 2012-02-17 7:04 ` [PATCH 2/3] distro_tracking_fields: add information for lsbtest Yi Zhao 2012-02-17 7:04 ` [PATCH 3/3] task-core-lsb: add lsbtest to RDEPENDS_task-core-misc list Yi Zhao 2 siblings, 1 reply; 9+ messages in thread From: Yi Zhao @ 2012-02-17 7:04 UTC (permalink / raw) To: openembedded-core The recipe is used for LSB tests. The script LSB_Test.sh does the following things: - setup LSB testing environment - download LSB rpm packages with list file packages_list from remote - install the packages - execute LSB testing with profile file session - collect the results Install packages_list and session files into ${D}/opt/lsb-test. [YOCTO #1567] --- meta/recipes-extended/lsb/lsbtest/LSB_Test.sh | 493 +++++++++++++++++++++++ meta/recipes-extended/lsb/lsbtest/packages_list | 50 +++ meta/recipes-extended/lsb/lsbtest/session | 194 +++++++++ meta/recipes-extended/lsb/lsbtest_1.0.bb | 36 ++ 4 files changed, 773 insertions(+), 0 deletions(-) create mode 100644 meta/recipes-extended/lsb/lsbtest/LSB_Test.sh create mode 100644 meta/recipes-extended/lsb/lsbtest/packages_list create mode 100644 meta/recipes-extended/lsb/lsbtest/session create mode 100644 meta/recipes-extended/lsb/lsbtest_1.0.bb diff --git a/meta/recipes-extended/lsb/lsbtest/LSB_Test.sh b/meta/recipes-extended/lsb/lsbtest/LSB_Test.sh new file mode 100644 index 0000000..a616f5e --- /dev/null +++ b/meta/recipes-extended/lsb/lsbtest/LSB_Test.sh @@ -0,0 +1,493 @@ +#!/bin/bash + +# Copyright (C) 2012 Wind River Systems, Inc. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License version 2 as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# See the GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +WORK_DIR="/opt/lsb-test" + +if [ `id -u` -ne 0 ] +then + cat << EOF + In order to install and run LSB testsuite, you need administrator privileges. + You are currently running this script as an unprivileged user. + +EOF + exit 1 +fi + +ARCH=`uname -m` +if [ ${ARCH} != "i686" ] && [ ${ARCH} != "x86_64" ] && [ ${ARCH} != "ppc" ] +then + echo "Error: Unsupported architecture" + exit 1 +fi + +RET=0 + +cd ${WORK_DIR} || exit 1 +# Step 1: Download the LSB Packages +echo "" +echo "Download LSB packages..." +echo "" + +if [ ! -e ./packages_list ] +then + echo "Error: Could not find packages list" >&2 + exit 1 +fi + +. ./packages_list + +PACKAGES_DIR="/var/opt/lsb/test/manager/packages/ftp.linuxfoundation.org/pub/lsb" + +BASE_PACKAGES_DIR="${PACKAGES_DIR}/base/${LSB_RELEASE}/binary" +RUNTIME_BASE_PACKAGES_DIR="${PACKAGES_DIR}/test_suites/released-all/binary/runtime" +RUNTIME_PACKAGES_DIR="${PACKAGES_DIR}/test_suites/${LSB_RELEASE}/binary/runtime" +APP_PACKAGES_DIR="${PACKAGES_DIR}/app-battery/${LSB_RELEASE}/${LSB_ARCH}" +APP_TESTFILES_DIR="${PACKAGES_DIR}/app-battery/tests" +SNAPSHOTS_TESTFILES_DIR="${PACKAGES_DIR}/snapshots/appbat/tests" + +if [ ! -d ${PACKAGES_DIR} ] +then + mkdir -p ${PACKAGES_DIR} +fi + +if [ ! -d ${BASE_PACKAGES_DIR} ] +then + mkdir -p ${BASE_PACKAGES_DIR} +fi + +if [ ! -d ${RUNTIME_BASE_PACKAGES_DIR} ] +then + mkdir -p ${RUNTIME_BASE_PACKAGES_DIR} +fi + +if [ ! -d ${RUNTIME_PACKAGES_DIR} ] +then + mkdir -p ${RUNTIME_PACKAGES_DIR} +fi + +if [ ! -d ${APP_PACKAGES_DIR} ] +then + mkdir -p ${APP_PACKAGES_DIR} +fi + +if [ ! -d ${APP_TESTFILES_DIR} ] +then + mkdir -p ${APP_TESTFILES_DIR} +fi + +# Official download server list. You can replace them with your own server. +SERVER_IPADDR="140.211.169.23" +SERVER_NAME="ftp.linuxfoundation.org" + +if ! `grep -F -q "${SERVER_NAME}" /etc/hosts`; then + echo "${SERVER_IPADDR} ${SERVER_NAME} ${SERVER_NAME}" >> /etc/hosts +fi + +#ping -c 5 ${SERVER_NAME} +#if [ $? -ne 0 ] +#then +# echo "The server: ${SERVER_NAME} is unreachable" +# exit 1 +#fi + +SERVER1="\ + http://${SERVER_NAME}/pub/lsb/base/${LSB_RELEASE}/binary" +SERVER2="\ + http://${SERVER_NAME}/pub/lsb/test_suites/released-all/binary/runtime" +SERVER3="\ + http://${SERVER_NAME}/pub/lsb/test_suites/${LSB_RELEASE}/binary/runtime" +SERVER4="\ + http://${SERVER_NAME}/pub/lsb/app-battery/${LSB_RELEASE}/${LSB_ARCH}" +SERVER5="\ + http://${SERVER_NAME}/pub/lsb/app-battery/tests" + +# We using "curl" as a download tool, "wget" is an alternative. +CURL=`which curl` +WGET=`which wget` +if [ ! -z ${CURL} ] +then + DOWNLOAD_CMD="${CURL} -R -L --retry 3 --retry-delay 4 --connect-timeout 180 --compressed -C - -o" +elif [ ! -z ${WGET} ] +then + DOWNLOAD_CMD="${WGET} -c -t 5 -O" +else + echo "Can not find a download tool, please install curl or wget." + exit 1 +fi + +cd ${BASE_PACKAGES_DIR} +for pkg in ${BASE_PACKAGES_LIST}; do + if [ ! -f ${pkg} ] + then + #${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER1}/${pkg} > /dev/null 2>&1 + ${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER1}/${pkg} + if [ $? -eq 0 ] + then + mv -f ${pkg}".#part" ${pkg} + echo "Download ${pkg} successfully." + else + echo "Download ${pkg} failed." + RET=1 + fi + fi +done + +cd ${RUNTIME_BASE_PACKAGES_DIR} +for pkg in ${RUNTIME_BASE_PACKAGES_LIST}; do + if [ ! -f ${pkg} ] + then + #${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER2}/${pkg} > /dev/null 2>&1 + ${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER2}/${pkg} + if [ $? -eq 0 ] + then + mv -f ${pkg}".#part" ${pkg} + echo "Download ${pkg} successfully." + else + echo "Download ${pkg} failed." + RET=1 + fi + fi +done + +cd ${RUNTIME_PACKAGES_DIR} +for pkg in ${RUNTIME_PACKAGES_LIST}; do + if [ ! -f ${pkg} ] + then + #${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER3}/${pkg} > /dev/null 2>&1 + ${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER3}/${pkg} + if [ $? -eq 0 ] + then + mv -f ${pkg}".#part" ${pkg} + echo "Download ${pkg} successfully." + else + echo "Download ${pkg} failed." + RET=1 + fi + fi +done + +cd ${APP_PACKAGES_DIR} +for pkg in ${APP_PACKAGES_LIST}; do + if [ ! -f ${pkg} ] + then + #${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER4}/${pkg} > /dev/null 2>&1 + ${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER4}/${pkg} + if [ $? -eq 0 ] + then + mv -f ${pkg}".#part" ${pkg} + echo "Download ${pkg} successfully." + else + echo "Download ${pkg} failed." + RET=1 + fi + fi +done + +cd ${APP_TESTFILES_DIR} +for pkg in ${APP_TESTFILES_LIST}; do + if [ ! -f ${pkg} ] + then + #${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER5}/${pkg} > /dev/null 2>&1 + ${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER5}/${pkg} + if [ $? -eq 0 ] + then + mv -f ${pkg}".#part" ${pkg} + echo "Download ${pkg} successfully." + else + echo "Download ${pkg} failed." + RET=1 + fi + fi +done + +if [ ${RET} -ne 0 ] +then + echo "Download some packages failed. Please download them again." + exit 1 +fi + +# Step 2: Install the LSB Packages +echo "" +echo "Install LSB packages..." +echo "" + +# Kill lighttpd +ps aux | grep "lighttpd" | grep -v -q "grep" +if [ $? -eq 0 ] +then + killall lighttpd >/dev/null 2>&1 +fi + +# Start avahi-daemon +ps aux | grep "avahi-daemon" | grep -v -q "grep" +if [ $? -ne 0 ] +then + /etc/init.d/avahi-daemon start >/dev/null 2>&1 +fi + +LSB_START_CMD="/opt/lsb/test/manager/bin/dist-checker-start.pl" +LSB_STOP_CMD="/opt/lsb/test/manager/bin/dist-checker-stop.pl" + +PLATFORM_FILE="/etc/rpm/platform" + +RPM_INSTALL_CMD="rpm --quiet --nodeps --replacepkgs --nosignature -i" +RPM_INSTALL_CMD_NOSCRIPTS="rpm --quiet --nodeps --replacepkgs --noscripts --nosignature -i" + +# If the lsb has been started, stop it first. +if [ -x ${LSB_STOP_CMD} ] +then + ${LSB_STOP_CMD} +fi + +if ! `grep -F -q "noarch-suse" ${PLATFORM_FILE}`; then + if [ ${ARCH} == i686 ];then + echo "i486-suse" >> ${PLATFORM_FILE} + echo "i486-noarch" >> ${PLATFORM_FILE} + echo "i486-pc" >> ${PLATFORM_FILE} + echo "noarch-suse" >> ${PLATFORM_FILE} + else + echo "${ARCH}-suse" >> ${PLATFORM_FILE} + echo "${ARCH}-noarch" >> ${PLATFORM_FILE} + echo "${ARCH}-pc" >> ${PLATFORM_FILE} + echo "noarch-suse" >> ${PLATFORM_FILE} + fi +fi + +if [ -d ${BASE_PACKAGES_DIR} ] +then + cd ${BASE_PACKAGES_DIR} + for pkg in ${BASE_PACKAGES_LIST} + do + rpm --quiet -q ${pkg%\.*} + if [ $? -ne 0 ]; then + $RPM_INSTALL_CMD ${pkg} + fi + done +fi + +if [ -d ${RUNTIME_BASE_PACKAGES_DIR} ] +then + cd ${RUNTIME_BASE_PACKAGES_DIR} + for pkg in ${RUNTIME_BASE_PACKAGES_LIST} + do + rpm --quiet -q ${pkg%\.*} + if [ $? -ne 0 ]; then + $RPM_INSTALL_CMD ${pkg} + fi + done +fi + +if [ -d ${RUNTIME_PACKAGES_DIR} ] +then + cd ${RUNTIME_PACKAGES_DIR} + for pkg in ${RUNTIME_PACKAGES_LIST} + do + rpm --quiet -q ${pkg%\.*} + if [ $? -ne 0 ]; then + $RPM_INSTALL_CMD ${pkg} + fi + done +fi + +if [ -d ${APP_PACKAGES_DIR} ] +then + cd ${APP_PACKAGES_DIR} + for pkg in ${APP_PACKAGES_LIST} + do + echo "${pkg}" | grep -q "apache\|xpdf" + if [ $? -eq 0 ] + then + rpm --quiet -q ${pkg%\.*} + if [ $? -ne 0 ]; then + $RPM_INSTALL_CMD_NOSCRIPTS ${pkg} + fi + else + rpm --quiet -q ${pkg%\.*} + if [ $? -ne 0 ]; then + $RPM_INSTALL_CMD ${pkg} + fi + fi + done +fi + +if [ ! -d ${SNAPSHOTS_TESTFILES_DIR} ] +then + mkdir -p ${SNAPSHOTS_TESTFILES_DIR} +fi + +if [ -d ${APP_TESTFILES_DIR} ] +then + cd ${APP_TESTFILES_DIR} + for pkg in ${APP_TESTFILES_LIST} + do + cp -f ${pkg} ${SNAPSHOTS_TESTFILES_DIR} + done +fi + +cd ${WORK_DIR} + +# Step 3: Set environment +echo "" +echo "Set environment..." +echo "" + +check () +{ + if [ $? -eq 0 ] + then + echo "PASS" + else + echo "FAIL" + exit 1 + fi +} + +echo "" +echo "---------------------------------" +echo "Create the Dirnames on target" + +if [ ! -d /etc/rpm/sysinfo ] +then + mkdir -pv /etc/rpm/sysinfo +fi + +cat > /etc/rpm/sysinfo/Dirnames << EOF +/etc/opt/lsb +/home/tet/LSB.tools +/opt/lsb-tet3-lite/lib/ksh +/opt/lsb-tet3-lite/lib/perl +/opt/lsb-tet3-lite/lib/posix_sh +/opt/lsb-tet3-lite/lib/tet3 +/opt/lsb-tet3-lite/lib/xpg3sh +/opt/lsb/appbat/lib/python2.4/site-packages/qm +/opt/lsb/appbat/lib/python2.4/site-packages/qm/external +/opt/lsb/appbat/lib/python2.4/site-packages/qm/external/DocumentTemplate +/opt/lsb/appbat/lib/python2.4/site-packages/qm/test +/opt/lsb/appbat/lib/python2.4/site-packages/qm/test/classes +/opt/lsb/appbat/lib/python2.4/site-packages/qm/test/web +/opt/lsb/test/doc +/opt/lsb/test/lib +/opt/lsb/test/qm/diagnostics +/opt/lsb/test/qm/doc +/opt/lsb/test/qm/doc/test/html +/opt/lsb/test/qm/doc/test/print +/opt/lsb/test/qm/dtml +/opt/lsb/test/qm/dtml/test +/opt/lsb/test/qm/messages/test +/opt/lsb/test/qm/tutorial/test/tdb +/opt/lsb/test/qm/tutorial/test/tdb/QMTest +/opt/lsb/test/qm/web +/opt/lsb/test/qm/web/images +/opt/lsb/test/qm/web/stylesheets +/opt/lsb/test/qm/xml +/opt/lsb/test/share +/usr/share/doc/lsb-runtime-test +/var/opt/lsb +/opt/lsb/test/desktop +/opt/lsb/test/desktop/fontconfig +/opt/lsb/test/desktop/freetype +/opt/lsb/test/desktop/gtkvts +/opt/lsb/test/desktop/libpng +/opt/lsb/test/desktop/qt3 +/opt/lsb/test/desktop/xft +/opt/lsb/test/desktop/xml +/opt/lsb/test/desktop/xrender + + +EOF + +if [ -f /etc/rpm/sysinfo/Dirnames ] +then + echo "Success to creat Dirnames file" +else + echo "Fail to creat Dirnames file" +fi + +echo "" +echo "---------------------------------" +echo "Update cache" +ldconfig +check; + +# Check loop device +if [ ! -b /dev/loop0 ] +then + insmod /lib/modules/`uname -r`/kernel/drivers/block/loop.ko + if [ $? != 0 ];then + echo "Insmod loop.ko failed." + fi +fi + +# Resolve localhost +LOCALHOST=`hostname` +if ! `grep -F -q "$LOCALHOST" /etc/hosts`; then + echo "127.0.0.1 $LOCALHOST" >> /etc/hosts +fi + +# Workaround to add part of locales for LSB test +localedef -i de_DE -f ISO-8859-1 de_DE +localedef -i de_DE -f ISO-8859-15 de_DE.ISO-8859-15 +localedef -i de_DE -f UTF-8 de_DE.UTF-8 +localedef -i de_DE@euro -f ISO-8859-15 de_DE@euro +localedef -i en_HK -f ISO-8859-1 en_HK +localedef -i en_PH -f ISO-8859-1 en_PH +localedef -i en_US -f ISO-8859-15 en_US.ISO-8859-15 +localedef -i en_US -f ISO-8859-1 en_US.ISO-8859-1 +localedef -i en_US -f ISO-8859-1 en_US +localedef -i en_US -f UTF-8 en_US.UTF-8 +localedef -i en_US -f ISO-8859-1 en_US.ISO8859-1 +localedef -i es_MX -f ISO-8859-1 es_MX +localedef -i fr_FR -f ISO-8859-1 fr_FR +localedef -i it_IT -f ISO-8859-1 it_IT +localedef -i ja_JP -f EUC-JP ja_JP.eucjp +localedef -i se_NO -f UTF-8 se_NO.UTF-8 +localedef -i ta_IN -f UTF-8 ta_IN + +echo "" +echo "Installation done!" +echo "" + +# Step 4: Start LSB test +if [ -x ${LSB_START_CMD} ] +then + ${LSB_START_CMD} +fi + +echo "---------------------------------" +echo "Run all the certification version of LSB Tests" +echo "---------------------------------" + +LSB_DIST_CHECKER="/opt/lsb/test/manager/utils/dist-checker.pl" +SESSION="${WORK_DIR}/session" +if [ ! -e ${SESSION} ] +then + echo "Error: Could not find session file." + echo "You must run LSB test from webbrower." + exit 1 +fi + +if [ -x ${LSB_DIST_CHECKER} ] +then + ${LSB_DIST_CHECKER} -v2 -f ${SESSION} + check +fi + +echo "" +echo "LSB test complete. Please check the log file in /var/opt/lsb/test/manager/results/" +echo "" + diff --git a/meta/recipes-extended/lsb/lsbtest/packages_list b/meta/recipes-extended/lsb/lsbtest/packages_list new file mode 100644 index 0000000..9285ed9 --- /dev/null +++ b/meta/recipes-extended/lsb/lsbtest/packages_list @@ -0,0 +1,50 @@ +LSB_RELEASE="released-4.1.0" +LSB_ARCH="lsbarch" + +BASE_PACKAGES_LIST="lsb-setup-4.1.0-1.noarch.rpm" + +RUNTIME_BASE_PACKAGES_LIST="lsb-dist-checker-4.1.0.1-2.targetarch.rpm \ + lsb-tet3-lite-3.7-15.lsb4.targetarch.rpm \ + lsb-tet3-lite-devel-3.7-15.lsb4.targetarch.rpm \ + lsb-xvfb-1.2.0-19.targetarch.rpm \ + " + +RUNTIME_PACKAGES_LIST="lsb-cmdchk-4.1.0-1.targetarch.rpm \ + lsb-libchk-4.1.0-1.targetarch.rpm \ + lsb-qm-2.2-8.lsb4.targetarch.rpm \ + lsb-task-dist-testkit-4.1.0-1.noarch.rpm \ + lsb-test-core-4.1.0-1.targetarch.rpm \ + lsb-test-cpp-t2c-4.1.0-1.targetarch.rpm \ + lsb-test-desktop-4.1.0-2.targetarch.rpm \ + lsb-test-desktop-t2c-4.1.0-1.targetarch.rpm \ + lsb-test-libstdcpp-4.1.0-13.lsb4.targetarch.rpm \ + lsb-test-olver-core-4.1.0-1.targetarch.rpm \ + lsb-test-perl-4.1.0-1.noarch.rpm \ + lsb-test-printing-4.1.0-1.targetarch.rpm \ + lsb-test-python-4.1.1-2.targetarch.rpm \ + lsb-test-qt3-azov-4.1.0-1.targetarch.rpm \ + lsb-test-qt4-azov-4.1.0-1.targetarch.rpm \ + lsb-test-xts5-5.1.5-38.lsb4.targetarch.rpm \ + lsb-test-alsa-t2c-4.1.0-1.targetarch.rpm \ + lsb-test-core-t2c-4.1.0-1.targetarch.rpm \ + lsb-test-xml2-azov-4.1.0-1.targetarch.rpm \ + " + +APP_PACKAGES_LIST="lsb-python-2.4.6-5.lsb4.targetarch.rpm \ + lsb-apache-2.2.14-3.lsb4.targetarch.rpm \ + lsb-tcl-8.5.7-6.lsb4.targetarch.rpm \ + lsb-expect-5.43.0-11.lsb4.targetarch.rpm \ + lsb-groff-1.20.1-5.lsb4.targetarch.rpm \ + lsb-raptor-1.4.19-3.lsb4.targetarch.rpm \ + lsb-xpdf-1.01-10.lsb4.targetarch.rpm \ + lsb-samba-3.4.3-5.lsb4.targetarch.rpm \ + lsb-rsync-3.0.6-3.lsb4.targetarch.rpm \ + " + +APP_TESTFILES_LIST="expect-tests.tar \ + tcl-tests.tar \ + raptor-tests.tar \ + test1.pdf \ + test2.pdf \ + " + diff --git a/meta/recipes-extended/lsb/lsbtest/session b/meta/recipes-extended/lsb/lsbtest/session new file mode 100644 index 0000000..85ca2ef --- /dev/null +++ b/meta/recipes-extended/lsb/lsbtest/session @@ -0,0 +1,194 @@ +[GENERAL] +VERBOSE_LEVEL: 1 +ARCHITECTURE: targetarch +USE_INTERNET: 1 +STD_VERSION: LSB 4.1 +STD_PROFILE: no +[cmdchk] +RUN: 1 +VERSION: local|* + +[libchk] +RUN: 1 +VERSION: local|* + +[alsa-t2c] +RUN: 1 +VERSION: local|* + +[alsa-t2c|local|*] +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/alsa-t2c +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/alsa-t2c/results + +[core] +RUN: 1 +VERSION: local|* + +[core|local|*] +AUTOREPLY_PROVIDES_BASH: n +AUTOREPLY_TESTRUN_PATH: /home/tet/test_sets +AUTOREPLY_PERSON: Automated +AUTOREPLY_KERNEL_NAME: vmlinuz +AUTOREPLY_INSTALL_LSBPAM_CONF: y +AUTOREPLY_PROVIDES_C_SHELL: n +AUTOREPLY_ORGANISATION: N/A +AUTOREPLY_SET_PASS_MIN_DAYS: y +AUTOREPLY_PROVIDES_SYSV_INIT: +AUTOREPLY_ISNTALL_DEVS: y +AUTOREPLY_SUPPORTS_FILE_CMD: y +AUTOREPLY_TEST_SYSTEM: Distribution Checker +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/core/tet/test_sets +AUTOREPLY_SUPPORTS_NLS: n +AUTOREPLY_SUPPORTS_PROCESS_ACCOUNTING: n +AUTOREPLY_PATH_TO_RC.D: +AUTOREPLY_ALLOWS_MAKEDEV: n +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/core/tet/test_sets/results + +[core-t2c] +RUN: 1 +VERSION: local|* + +[core-t2c|local|*] +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/core-t2c +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/core-t2c/results + +[cpp-t2c] +RUN: 1 +VERSION: local|* + +[cpp-t2c|local|*] +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/cpp-t2c +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/cpp-t2c/results + +[desktop] +RUN: 1 +VERSION: local|* + +[desktop|local|*] +AUTOREPLY_DESKTOP_ENVIRONMENT: [default] +AUTOREPLY_PERSON: Automated +AUTOREPLY_X_CLIENT_HOSTNAME: +AUTOREPLY_TEST_SYSTEM: Distribution Checker +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/desktop +AUTOREPLY_X11_FONT_PATH: [default] +AUTOREPLY_SHOW_SUMMARY_REPORT: +AUTOREPLY_ORGANISATION: N/A +AUTOREPLY_XVFB_DISPLAY: [default] + +[desktop-t2c] +RUN: 1 +VERSION: local|* + +[desktop-t2c|local|*] +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/desktop-t2c +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/desktop-t2c/results + +[libstdcpp] +RUN: 1 +VERSION: local|* + +[libstdcpp|local|*] +AUTOREPLY_TEST_SYSTEM: Distribution Checker +AUTOREPLY_PERSON: Automated +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/libstdcpp_4.1.0 +AUTOREPLY_ORGANISATION: N/A +AUTOREPLY_GNU_TRIPLET: + +[olver] +RUN: 1 +VERSION: local|* + +[olver|local|*] +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/olver-core +AUTOREPLY_RESULTS_DIR: /var/opt/lsb/test/olver-core + +[perl] +RUN: 1 +VERSION: local|* + +[perl|local|*] +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/perl +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/perl/results + +[printing] +RUN: 1 +VERSION: local|* + +[printing|local|*] +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/printing +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/printing/results + +[python] +RUN: 1 +VERSION: local|* + +[python|local|*] +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/python +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/python/results + +[qt3-azov] +RUN: 1 +VERSION: local|* + +[qt3-azov|local|*] +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/qt3-azov +AUTOREPLY_X11_FONT_PATH: [default] +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/qt3-azov/results + +[qt4-azov] +RUN: 1 +VERSION: local|* + +[qt4-azov|local|*] +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/qt4-azov +AUTOREPLY_X11_FONT_PATH: [default] +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/qt4-azov/results + +[xml2-azov] +RUN: 1 +VERSION: local|* + +[xts5] +RUN: 1 +VERSION: local|* + +[xts5|local|*] +AUTOREPLY_XT_FONTPATH_GOOD: [default] +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/xts5 +AUTOREPLY_XVFB_DISPLAY: [default] +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/xts5/xts5/results +AUTOREPLY_XT_FONTPATH: [default] +AUTOREPLY_X_CLIENT_HOSTNAME: + +[apache] +RUN: 1 +VERSION: local|* + +[expect] +RUN: 1 +VERSION: local|* + +[groff] +RUN: 1 +VERSION: local|* + +[raptor] +RUN: 1 +VERSION: local|* + +[rsync] +RUN: 1 +VERSION: local|* + +[samba] +RUN: 1 +VERSION: local|* + +[tcl] +RUN: 1 +VERSION: local|* + +[xpdf] +RUN: 1 +VERSION: local|* + diff --git a/meta/recipes-extended/lsb/lsbtest_1.0.bb b/meta/recipes-extended/lsb/lsbtest_1.0.bb new file mode 100644 index 0000000..cf3dcd5 --- /dev/null +++ b/meta/recipes-extended/lsb/lsbtest_1.0.bb @@ -0,0 +1,36 @@ +DESCRIPTION = "automate test for lsb" +SECTION = "console/utils" +LICENSE = "GPLv2" +PR = "r0" + +LIC_FILES_CHKSUM = "file://LSB_Test.sh;beginline=3;endline=16;md5=7063bb54b04719df0716b513447f4fc0" + +SRC_URI = "file://LSB_Test.sh \ + file://packages_list \ + file://session \ + " + +S=${WORKDIR} + +do_install() { + install -d ${D}/usr/bin + install -m 0755 ${S}/LSB_Test.sh ${D}/usr/bin + install -d ${D}/opt/lsb-test + install -m 0644 ${S}/packages_list ${D}/opt/lsb-test/packages_list + install -m 0644 ${S}/session ${D}/opt/lsb-test/session + if [ "${TARGET_ARCH}" == "i586" ];then + sed -i -e 's/lsbarch/ia32/g' -e 's/targetarch/i486/g' ${D}/opt/lsb-test/packages_list + sed -i -e 's/targetarch/x86/g' ${D}/opt/lsb-test/session + fi + if [ "${TARGET_ARCH}" == "x86_64" ];then + sed -i -e 's/lsbarch/amd64/g' -e 's/targetarch/x86_64/g' ${D}/opt/lsb-test/packages_list + sed -i -e 's/targetarch/x86-64/g' ${D}/opt/lsb-test/session + fi + if [ "${TARGET_ARCH}" == "powerpc" ];then + sed -i -e 's/lsbarch/ppc32/g' -e 's/targetarch/ppc/g' ${D}/opt/lsb-test/packages_list + sed -i -e 's/targetarch/PPC32/g' ${D}/opt/lsb-test/session + fi +} + +FILES_${PN} += "/opt/lsb-test/* \ + " -- 1.7.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH 1/3] lsbtest: Add recipe for LSB tests and automate test 2012-02-17 7:04 ` [PATCH 1/3] " Yi Zhao @ 2012-02-21 20:09 ` Saul Wold 2012-02-21 21:02 ` Khem Raj 2012-02-21 21:04 ` Koen Kooi 0 siblings, 2 replies; 9+ messages in thread From: Saul Wold @ 2012-02-21 20:09 UTC (permalink / raw) To: Patches and discussions about the oe-core layer On 02/16/2012 10:02 PM, Yi Zhao wrote: > The recipe is used for LSB tests. The script LSB_Test.sh does the > following things: > - setup LSB testing environment > - download LSB rpm packages with list file packages_list from remote > - install the packages > - execute LSB testing with profile file session > - collect the results > > Install packages_list and session files into ${D}/opt/lsb-test. > > [YOCTO #1567] > --- > meta/recipes-extended/lsb/lsbtest/LSB_Test.sh | 493 +++++++++++++++++++++++ > meta/recipes-extended/lsb/lsbtest/packages_list | 50 +++ > meta/recipes-extended/lsb/lsbtest/session | 194 +++++++++ > meta/recipes-extended/lsb/lsbtest_1.0.bb | 36 ++ > 4 files changed, 773 insertions(+), 0 deletions(-) > create mode 100644 meta/recipes-extended/lsb/lsbtest/LSB_Test.sh > create mode 100644 meta/recipes-extended/lsb/lsbtest/packages_list > create mode 100644 meta/recipes-extended/lsb/lsbtest/session > create mode 100644 meta/recipes-extended/lsb/lsbtest_1.0.bb I think you need to have a RDEPENDS on at a minimum for this lsbtest recipe since it relies on RPM to install the packages. RDEPENDS = "rpm" Sau! > > diff --git a/meta/recipes-extended/lsb/lsbtest/LSB_Test.sh b/meta/recipes-extended/lsb/lsbtest/LSB_Test.sh > new file mode 100644 > index 0000000..a616f5e > --- /dev/null > +++ b/meta/recipes-extended/lsb/lsbtest/LSB_Test.sh > @@ -0,0 +1,493 @@ > +#!/bin/bash > + > +# Copyright (C) 2012 Wind River Systems, Inc. > +# > +# This program is free software; you can redistribute it and/or modify > +# it under the terms of the GNU General Public License version 2 as > +# published by the Free Software Foundation. > +# > +# This program is distributed in the hope that it will be useful, > +# but WITHOUT ANY WARRANTY; without even the implied warranty of > +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. > +# See the GNU General Public License for more details. > +# > +# You should have received a copy of the GNU General Public License > +# along with this program; if not, write to the Free Software > +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA > + > + > +WORK_DIR="/opt/lsb-test" > + > +if [ `id -u` -ne 0 ] > +then > + cat<< EOF > + In order to install and run LSB testsuite, you need administrator privileges. > + You are currently running this script as an unprivileged user. > + > +EOF > + exit 1 > +fi > + > +ARCH=`uname -m` > +if [ ${ARCH} != "i686" ]&& [ ${ARCH} != "x86_64" ]&& [ ${ARCH} != "ppc" ] > +then > + echo "Error: Unsupported architecture" > + exit 1 > +fi > + > +RET=0 > + > +cd ${WORK_DIR} || exit 1 > +# Step 1: Download the LSB Packages > +echo "" > +echo "Download LSB packages..." > +echo "" > + > +if [ ! -e ./packages_list ] > +then > + echo "Error: Could not find packages list">&2 > + exit 1 > +fi > + > +. ./packages_list > + > +PACKAGES_DIR="/var/opt/lsb/test/manager/packages/ftp.linuxfoundation.org/pub/lsb" > + > +BASE_PACKAGES_DIR="${PACKAGES_DIR}/base/${LSB_RELEASE}/binary" > +RUNTIME_BASE_PACKAGES_DIR="${PACKAGES_DIR}/test_suites/released-all/binary/runtime" > +RUNTIME_PACKAGES_DIR="${PACKAGES_DIR}/test_suites/${LSB_RELEASE}/binary/runtime" > +APP_PACKAGES_DIR="${PACKAGES_DIR}/app-battery/${LSB_RELEASE}/${LSB_ARCH}" > +APP_TESTFILES_DIR="${PACKAGES_DIR}/app-battery/tests" > +SNAPSHOTS_TESTFILES_DIR="${PACKAGES_DIR}/snapshots/appbat/tests" > + > +if [ ! -d ${PACKAGES_DIR} ] > +then > + mkdir -p ${PACKAGES_DIR} > +fi > + > +if [ ! -d ${BASE_PACKAGES_DIR} ] > +then > + mkdir -p ${BASE_PACKAGES_DIR} > +fi > + > +if [ ! -d ${RUNTIME_BASE_PACKAGES_DIR} ] > +then > + mkdir -p ${RUNTIME_BASE_PACKAGES_DIR} > +fi > + > +if [ ! -d ${RUNTIME_PACKAGES_DIR} ] > +then > + mkdir -p ${RUNTIME_PACKAGES_DIR} > +fi > + > +if [ ! -d ${APP_PACKAGES_DIR} ] > +then > + mkdir -p ${APP_PACKAGES_DIR} > +fi > + > +if [ ! -d ${APP_TESTFILES_DIR} ] > +then > + mkdir -p ${APP_TESTFILES_DIR} > +fi > + > +# Official download server list. You can replace them with your own server. > +SERVER_IPADDR="140.211.169.23" > +SERVER_NAME="ftp.linuxfoundation.org" > + > +if ! `grep -F -q "${SERVER_NAME}" /etc/hosts`; then > + echo "${SERVER_IPADDR} ${SERVER_NAME} ${SERVER_NAME}">> /etc/hosts > +fi > + > +#ping -c 5 ${SERVER_NAME} > +#if [ $? -ne 0 ] > +#then > +# echo "The server: ${SERVER_NAME} is unreachable" > +# exit 1 > +#fi > + > +SERVER1="\ > + http://${SERVER_NAME}/pub/lsb/base/${LSB_RELEASE}/binary" > +SERVER2="\ > + http://${SERVER_NAME}/pub/lsb/test_suites/released-all/binary/runtime" > +SERVER3="\ > + http://${SERVER_NAME}/pub/lsb/test_suites/${LSB_RELEASE}/binary/runtime" > +SERVER4="\ > + http://${SERVER_NAME}/pub/lsb/app-battery/${LSB_RELEASE}/${LSB_ARCH}" > +SERVER5="\ > + http://${SERVER_NAME}/pub/lsb/app-battery/tests" > + > +# We using "curl" as a download tool, "wget" is an alternative. > +CURL=`which curl` > +WGET=`which wget` > +if [ ! -z ${CURL} ] > +then > + DOWNLOAD_CMD="${CURL} -R -L --retry 3 --retry-delay 4 --connect-timeout 180 --compressed -C - -o" > +elif [ ! -z ${WGET} ] > +then > + DOWNLOAD_CMD="${WGET} -c -t 5 -O" > +else > + echo "Can not find a download tool, please install curl or wget." > + exit 1 > +fi > + > +cd ${BASE_PACKAGES_DIR} > +for pkg in ${BASE_PACKAGES_LIST}; do > + if [ ! -f ${pkg} ] > + then > + #${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER1}/${pkg}> /dev/null 2>&1 > + ${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER1}/${pkg} > + if [ $? -eq 0 ] > + then > + mv -f ${pkg}".#part" ${pkg} > + echo "Download ${pkg} successfully." > + else > + echo "Download ${pkg} failed." > + RET=1 > + fi > + fi > +done > + > +cd ${RUNTIME_BASE_PACKAGES_DIR} > +for pkg in ${RUNTIME_BASE_PACKAGES_LIST}; do > + if [ ! -f ${pkg} ] > + then > + #${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER2}/${pkg}> /dev/null 2>&1 > + ${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER2}/${pkg} > + if [ $? -eq 0 ] > + then > + mv -f ${pkg}".#part" ${pkg} > + echo "Download ${pkg} successfully." > + else > + echo "Download ${pkg} failed." > + RET=1 > + fi > + fi > +done > + > +cd ${RUNTIME_PACKAGES_DIR} > +for pkg in ${RUNTIME_PACKAGES_LIST}; do > + if [ ! -f ${pkg} ] > + then > + #${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER3}/${pkg}> /dev/null 2>&1 > + ${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER3}/${pkg} > + if [ $? -eq 0 ] > + then > + mv -f ${pkg}".#part" ${pkg} > + echo "Download ${pkg} successfully." > + else > + echo "Download ${pkg} failed." > + RET=1 > + fi > + fi > +done > + > +cd ${APP_PACKAGES_DIR} > +for pkg in ${APP_PACKAGES_LIST}; do > + if [ ! -f ${pkg} ] > + then > + #${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER4}/${pkg}> /dev/null 2>&1 > + ${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER4}/${pkg} > + if [ $? -eq 0 ] > + then > + mv -f ${pkg}".#part" ${pkg} > + echo "Download ${pkg} successfully." > + else > + echo "Download ${pkg} failed." > + RET=1 > + fi > + fi > +done > + > +cd ${APP_TESTFILES_DIR} > +for pkg in ${APP_TESTFILES_LIST}; do > + if [ ! -f ${pkg} ] > + then > + #${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER5}/${pkg}> /dev/null 2>&1 > + ${DOWNLOAD_CMD} ${pkg}".#part" ${SERVER5}/${pkg} > + if [ $? -eq 0 ] > + then > + mv -f ${pkg}".#part" ${pkg} > + echo "Download ${pkg} successfully." > + else > + echo "Download ${pkg} failed." > + RET=1 > + fi > + fi > +done > + > +if [ ${RET} -ne 0 ] > +then > + echo "Download some packages failed. Please download them again." > + exit 1 > +fi > + > +# Step 2: Install the LSB Packages > +echo "" > +echo "Install LSB packages..." > +echo "" > + > +# Kill lighttpd > +ps aux | grep "lighttpd" | grep -v -q "grep" > +if [ $? -eq 0 ] > +then > + killall lighttpd>/dev/null 2>&1 > +fi > + > +# Start avahi-daemon > +ps aux | grep "avahi-daemon" | grep -v -q "grep" > +if [ $? -ne 0 ] > +then > + /etc/init.d/avahi-daemon start>/dev/null 2>&1 > +fi > + > +LSB_START_CMD="/opt/lsb/test/manager/bin/dist-checker-start.pl" > +LSB_STOP_CMD="/opt/lsb/test/manager/bin/dist-checker-stop.pl" > + > +PLATFORM_FILE="/etc/rpm/platform" > + > +RPM_INSTALL_CMD="rpm --quiet --nodeps --replacepkgs --nosignature -i" > +RPM_INSTALL_CMD_NOSCRIPTS="rpm --quiet --nodeps --replacepkgs --noscripts --nosignature -i" > + > +# If the lsb has been started, stop it first. > +if [ -x ${LSB_STOP_CMD} ] > +then > + ${LSB_STOP_CMD} > +fi > + > +if ! `grep -F -q "noarch-suse" ${PLATFORM_FILE}`; then > + if [ ${ARCH} == i686 ];then > + echo "i486-suse">> ${PLATFORM_FILE} > + echo "i486-noarch">> ${PLATFORM_FILE} > + echo "i486-pc">> ${PLATFORM_FILE} > + echo "noarch-suse">> ${PLATFORM_FILE} > + else > + echo "${ARCH}-suse">> ${PLATFORM_FILE} > + echo "${ARCH}-noarch">> ${PLATFORM_FILE} > + echo "${ARCH}-pc">> ${PLATFORM_FILE} > + echo "noarch-suse">> ${PLATFORM_FILE} > + fi > +fi > + > +if [ -d ${BASE_PACKAGES_DIR} ] > +then > + cd ${BASE_PACKAGES_DIR} > + for pkg in ${BASE_PACKAGES_LIST} > + do > + rpm --quiet -q ${pkg%\.*} > + if [ $? -ne 0 ]; then > + $RPM_INSTALL_CMD ${pkg} > + fi > + done > +fi > + > +if [ -d ${RUNTIME_BASE_PACKAGES_DIR} ] > +then > + cd ${RUNTIME_BASE_PACKAGES_DIR} > + for pkg in ${RUNTIME_BASE_PACKAGES_LIST} > + do > + rpm --quiet -q ${pkg%\.*} > + if [ $? -ne 0 ]; then > + $RPM_INSTALL_CMD ${pkg} > + fi > + done > +fi > + > +if [ -d ${RUNTIME_PACKAGES_DIR} ] > +then > + cd ${RUNTIME_PACKAGES_DIR} > + for pkg in ${RUNTIME_PACKAGES_LIST} > + do > + rpm --quiet -q ${pkg%\.*} > + if [ $? -ne 0 ]; then > + $RPM_INSTALL_CMD ${pkg} > + fi > + done > +fi > + > +if [ -d ${APP_PACKAGES_DIR} ] > +then > + cd ${APP_PACKAGES_DIR} > + for pkg in ${APP_PACKAGES_LIST} > + do > + echo "${pkg}" | grep -q "apache\|xpdf" > + if [ $? -eq 0 ] > + then > + rpm --quiet -q ${pkg%\.*} > + if [ $? -ne 0 ]; then > + $RPM_INSTALL_CMD_NOSCRIPTS ${pkg} > + fi > + else > + rpm --quiet -q ${pkg%\.*} > + if [ $? -ne 0 ]; then > + $RPM_INSTALL_CMD ${pkg} > + fi > + fi > + done > +fi > + > +if [ ! -d ${SNAPSHOTS_TESTFILES_DIR} ] > +then > + mkdir -p ${SNAPSHOTS_TESTFILES_DIR} > +fi > + > +if [ -d ${APP_TESTFILES_DIR} ] > +then > + cd ${APP_TESTFILES_DIR} > + for pkg in ${APP_TESTFILES_LIST} > + do > + cp -f ${pkg} ${SNAPSHOTS_TESTFILES_DIR} > + done > +fi > + > +cd ${WORK_DIR} > + > +# Step 3: Set environment > +echo "" > +echo "Set environment..." > +echo "" > + > +check () > +{ > + if [ $? -eq 0 ] > + then > + echo "PASS" > + else > + echo "FAIL" > + exit 1 > + fi > +} > + > +echo "" > +echo "---------------------------------" > +echo "Create the Dirnames on target" > + > +if [ ! -d /etc/rpm/sysinfo ] > +then > + mkdir -pv /etc/rpm/sysinfo > +fi > + > +cat> /etc/rpm/sysinfo/Dirnames<< EOF > +/etc/opt/lsb > +/home/tet/LSB.tools > +/opt/lsb-tet3-lite/lib/ksh > +/opt/lsb-tet3-lite/lib/perl > +/opt/lsb-tet3-lite/lib/posix_sh > +/opt/lsb-tet3-lite/lib/tet3 > +/opt/lsb-tet3-lite/lib/xpg3sh > +/opt/lsb/appbat/lib/python2.4/site-packages/qm > +/opt/lsb/appbat/lib/python2.4/site-packages/qm/external > +/opt/lsb/appbat/lib/python2.4/site-packages/qm/external/DocumentTemplate > +/opt/lsb/appbat/lib/python2.4/site-packages/qm/test > +/opt/lsb/appbat/lib/python2.4/site-packages/qm/test/classes > +/opt/lsb/appbat/lib/python2.4/site-packages/qm/test/web > +/opt/lsb/test/doc > +/opt/lsb/test/lib > +/opt/lsb/test/qm/diagnostics > +/opt/lsb/test/qm/doc > +/opt/lsb/test/qm/doc/test/html > +/opt/lsb/test/qm/doc/test/print > +/opt/lsb/test/qm/dtml > +/opt/lsb/test/qm/dtml/test > +/opt/lsb/test/qm/messages/test > +/opt/lsb/test/qm/tutorial/test/tdb > +/opt/lsb/test/qm/tutorial/test/tdb/QMTest > +/opt/lsb/test/qm/web > +/opt/lsb/test/qm/web/images > +/opt/lsb/test/qm/web/stylesheets > +/opt/lsb/test/qm/xml > +/opt/lsb/test/share > +/usr/share/doc/lsb-runtime-test > +/var/opt/lsb > +/opt/lsb/test/desktop > +/opt/lsb/test/desktop/fontconfig > +/opt/lsb/test/desktop/freetype > +/opt/lsb/test/desktop/gtkvts > +/opt/lsb/test/desktop/libpng > +/opt/lsb/test/desktop/qt3 > +/opt/lsb/test/desktop/xft > +/opt/lsb/test/desktop/xml > +/opt/lsb/test/desktop/xrender > + > + > +EOF > + > +if [ -f /etc/rpm/sysinfo/Dirnames ] > +then > + echo "Success to creat Dirnames file" > +else > + echo "Fail to creat Dirnames file" > +fi > + > +echo "" > +echo "---------------------------------" > +echo "Update cache" > +ldconfig > +check; > + > +# Check loop device > +if [ ! -b /dev/loop0 ] > +then > + insmod /lib/modules/`uname -r`/kernel/drivers/block/loop.ko > + if [ $? != 0 ];then > + echo "Insmod loop.ko failed." > + fi > +fi > + > +# Resolve localhost > +LOCALHOST=`hostname` > +if ! `grep -F -q "$LOCALHOST" /etc/hosts`; then > + echo "127.0.0.1 $LOCALHOST">> /etc/hosts > +fi > + > +# Workaround to add part of locales for LSB test > +localedef -i de_DE -f ISO-8859-1 de_DE > +localedef -i de_DE -f ISO-8859-15 de_DE.ISO-8859-15 > +localedef -i de_DE -f UTF-8 de_DE.UTF-8 > +localedef -i de_DE@euro -f ISO-8859-15 de_DE@euro > +localedef -i en_HK -f ISO-8859-1 en_HK > +localedef -i en_PH -f ISO-8859-1 en_PH > +localedef -i en_US -f ISO-8859-15 en_US.ISO-8859-15 > +localedef -i en_US -f ISO-8859-1 en_US.ISO-8859-1 > +localedef -i en_US -f ISO-8859-1 en_US > +localedef -i en_US -f UTF-8 en_US.UTF-8 > +localedef -i en_US -f ISO-8859-1 en_US.ISO8859-1 > +localedef -i es_MX -f ISO-8859-1 es_MX > +localedef -i fr_FR -f ISO-8859-1 fr_FR > +localedef -i it_IT -f ISO-8859-1 it_IT > +localedef -i ja_JP -f EUC-JP ja_JP.eucjp > +localedef -i se_NO -f UTF-8 se_NO.UTF-8 > +localedef -i ta_IN -f UTF-8 ta_IN > + > +echo "" > +echo "Installation done!" > +echo "" > + > +# Step 4: Start LSB test > +if [ -x ${LSB_START_CMD} ] > +then > + ${LSB_START_CMD} > +fi > + > +echo "---------------------------------" > +echo "Run all the certification version of LSB Tests" > +echo "---------------------------------" > + > +LSB_DIST_CHECKER="/opt/lsb/test/manager/utils/dist-checker.pl" > +SESSION="${WORK_DIR}/session" > +if [ ! -e ${SESSION} ] > +then > + echo "Error: Could not find session file." > + echo "You must run LSB test from webbrower." > + exit 1 > +fi > + > +if [ -x ${LSB_DIST_CHECKER} ] > +then > + ${LSB_DIST_CHECKER} -v2 -f ${SESSION} > + check > +fi > + > +echo "" > +echo "LSB test complete. Please check the log file in /var/opt/lsb/test/manager/results/" > +echo "" > + > diff --git a/meta/recipes-extended/lsb/lsbtest/packages_list b/meta/recipes-extended/lsb/lsbtest/packages_list > new file mode 100644 > index 0000000..9285ed9 > --- /dev/null > +++ b/meta/recipes-extended/lsb/lsbtest/packages_list > @@ -0,0 +1,50 @@ > +LSB_RELEASE="released-4.1.0" > +LSB_ARCH="lsbarch" > + > +BASE_PACKAGES_LIST="lsb-setup-4.1.0-1.noarch.rpm" > + > +RUNTIME_BASE_PACKAGES_LIST="lsb-dist-checker-4.1.0.1-2.targetarch.rpm \ > + lsb-tet3-lite-3.7-15.lsb4.targetarch.rpm \ > + lsb-tet3-lite-devel-3.7-15.lsb4.targetarch.rpm \ > + lsb-xvfb-1.2.0-19.targetarch.rpm \ > + " > + > +RUNTIME_PACKAGES_LIST="lsb-cmdchk-4.1.0-1.targetarch.rpm \ > + lsb-libchk-4.1.0-1.targetarch.rpm \ > + lsb-qm-2.2-8.lsb4.targetarch.rpm \ > + lsb-task-dist-testkit-4.1.0-1.noarch.rpm \ > + lsb-test-core-4.1.0-1.targetarch.rpm \ > + lsb-test-cpp-t2c-4.1.0-1.targetarch.rpm \ > + lsb-test-desktop-4.1.0-2.targetarch.rpm \ > + lsb-test-desktop-t2c-4.1.0-1.targetarch.rpm \ > + lsb-test-libstdcpp-4.1.0-13.lsb4.targetarch.rpm \ > + lsb-test-olver-core-4.1.0-1.targetarch.rpm \ > + lsb-test-perl-4.1.0-1.noarch.rpm \ > + lsb-test-printing-4.1.0-1.targetarch.rpm \ > + lsb-test-python-4.1.1-2.targetarch.rpm \ > + lsb-test-qt3-azov-4.1.0-1.targetarch.rpm \ > + lsb-test-qt4-azov-4.1.0-1.targetarch.rpm \ > + lsb-test-xts5-5.1.5-38.lsb4.targetarch.rpm \ > + lsb-test-alsa-t2c-4.1.0-1.targetarch.rpm \ > + lsb-test-core-t2c-4.1.0-1.targetarch.rpm \ > + lsb-test-xml2-azov-4.1.0-1.targetarch.rpm \ > + " > + > +APP_PACKAGES_LIST="lsb-python-2.4.6-5.lsb4.targetarch.rpm \ > + lsb-apache-2.2.14-3.lsb4.targetarch.rpm \ > + lsb-tcl-8.5.7-6.lsb4.targetarch.rpm \ > + lsb-expect-5.43.0-11.lsb4.targetarch.rpm \ > + lsb-groff-1.20.1-5.lsb4.targetarch.rpm \ > + lsb-raptor-1.4.19-3.lsb4.targetarch.rpm \ > + lsb-xpdf-1.01-10.lsb4.targetarch.rpm \ > + lsb-samba-3.4.3-5.lsb4.targetarch.rpm \ > + lsb-rsync-3.0.6-3.lsb4.targetarch.rpm \ > + " > + > +APP_TESTFILES_LIST="expect-tests.tar \ > + tcl-tests.tar \ > + raptor-tests.tar \ > + test1.pdf \ > + test2.pdf \ > + " > + > diff --git a/meta/recipes-extended/lsb/lsbtest/session b/meta/recipes-extended/lsb/lsbtest/session > new file mode 100644 > index 0000000..85ca2ef > --- /dev/null > +++ b/meta/recipes-extended/lsb/lsbtest/session > @@ -0,0 +1,194 @@ > +[GENERAL] > +VERBOSE_LEVEL: 1 > +ARCHITECTURE: targetarch > +USE_INTERNET: 1 > +STD_VERSION: LSB 4.1 > +STD_PROFILE: no > +[cmdchk] > +RUN: 1 > +VERSION: local|* > + > +[libchk] > +RUN: 1 > +VERSION: local|* > + > +[alsa-t2c] > +RUN: 1 > +VERSION: local|* > + > +[alsa-t2c|local|*] > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/alsa-t2c > +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/alsa-t2c/results > + > +[core] > +RUN: 1 > +VERSION: local|* > + > +[core|local|*] > +AUTOREPLY_PROVIDES_BASH: n > +AUTOREPLY_TESTRUN_PATH: /home/tet/test_sets > +AUTOREPLY_PERSON: Automated > +AUTOREPLY_KERNEL_NAME: vmlinuz > +AUTOREPLY_INSTALL_LSBPAM_CONF: y > +AUTOREPLY_PROVIDES_C_SHELL: n > +AUTOREPLY_ORGANISATION: N/A > +AUTOREPLY_SET_PASS_MIN_DAYS: y > +AUTOREPLY_PROVIDES_SYSV_INIT: > +AUTOREPLY_ISNTALL_DEVS: y > +AUTOREPLY_SUPPORTS_FILE_CMD: y > +AUTOREPLY_TEST_SYSTEM: Distribution Checker > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/core/tet/test_sets > +AUTOREPLY_SUPPORTS_NLS: n > +AUTOREPLY_SUPPORTS_PROCESS_ACCOUNTING: n > +AUTOREPLY_PATH_TO_RC.D: > +AUTOREPLY_ALLOWS_MAKEDEV: n > +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/core/tet/test_sets/results > + > +[core-t2c] > +RUN: 1 > +VERSION: local|* > + > +[core-t2c|local|*] > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/core-t2c > +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/core-t2c/results > + > +[cpp-t2c] > +RUN: 1 > +VERSION: local|* > + > +[cpp-t2c|local|*] > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/cpp-t2c > +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/cpp-t2c/results > + > +[desktop] > +RUN: 1 > +VERSION: local|* > + > +[desktop|local|*] > +AUTOREPLY_DESKTOP_ENVIRONMENT: [default] > +AUTOREPLY_PERSON: Automated > +AUTOREPLY_X_CLIENT_HOSTNAME: > +AUTOREPLY_TEST_SYSTEM: Distribution Checker > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/desktop > +AUTOREPLY_X11_FONT_PATH: [default] > +AUTOREPLY_SHOW_SUMMARY_REPORT: > +AUTOREPLY_ORGANISATION: N/A > +AUTOREPLY_XVFB_DISPLAY: [default] > + > +[desktop-t2c] > +RUN: 1 > +VERSION: local|* > + > +[desktop-t2c|local|*] > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/desktop-t2c > +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/desktop-t2c/results > + > +[libstdcpp] > +RUN: 1 > +VERSION: local|* > + > +[libstdcpp|local|*] > +AUTOREPLY_TEST_SYSTEM: Distribution Checker > +AUTOREPLY_PERSON: Automated > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/libstdcpp_4.1.0 > +AUTOREPLY_ORGANISATION: N/A > +AUTOREPLY_GNU_TRIPLET: > + > +[olver] > +RUN: 1 > +VERSION: local|* > + > +[olver|local|*] > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/olver-core > +AUTOREPLY_RESULTS_DIR: /var/opt/lsb/test/olver-core > + > +[perl] > +RUN: 1 > +VERSION: local|* > + > +[perl|local|*] > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/perl > +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/perl/results > + > +[printing] > +RUN: 1 > +VERSION: local|* > + > +[printing|local|*] > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/printing > +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/printing/results > + > +[python] > +RUN: 1 > +VERSION: local|* > + > +[python|local|*] > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/python > +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/python/results > + > +[qt3-azov] > +RUN: 1 > +VERSION: local|* > + > +[qt3-azov|local|*] > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/qt3-azov > +AUTOREPLY_X11_FONT_PATH: [default] > +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/qt3-azov/results > + > +[qt4-azov] > +RUN: 1 > +VERSION: local|* > + > +[qt4-azov|local|*] > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/qt4-azov > +AUTOREPLY_X11_FONT_PATH: [default] > +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/qt4-azov/results > + > +[xml2-azov] > +RUN: 1 > +VERSION: local|* > + > +[xts5] > +RUN: 1 > +VERSION: local|* > + > +[xts5|local|*] > +AUTOREPLY_XT_FONTPATH_GOOD: [default] > +AUTOREPLY_TESTSUITE_DIR: /opt/lsb/test/xts5 > +AUTOREPLY_XVFB_DISPLAY: [default] > +AUTOREPLY_RESULTS_DIR: /opt/lsb/test/xts5/xts5/results > +AUTOREPLY_XT_FONTPATH: [default] > +AUTOREPLY_X_CLIENT_HOSTNAME: > + > +[apache] > +RUN: 1 > +VERSION: local|* > + > +[expect] > +RUN: 1 > +VERSION: local|* > + > +[groff] > +RUN: 1 > +VERSION: local|* > + > +[raptor] > +RUN: 1 > +VERSION: local|* > + > +[rsync] > +RUN: 1 > +VERSION: local|* > + > +[samba] > +RUN: 1 > +VERSION: local|* > + > +[tcl] > +RUN: 1 > +VERSION: local|* > + > +[xpdf] > +RUN: 1 > +VERSION: local|* > + > diff --git a/meta/recipes-extended/lsb/lsbtest_1.0.bb b/meta/recipes-extended/lsb/lsbtest_1.0.bb > new file mode 100644 > index 0000000..cf3dcd5 > --- /dev/null > +++ b/meta/recipes-extended/lsb/lsbtest_1.0.bb > @@ -0,0 +1,36 @@ > +DESCRIPTION = "automate test for lsb" > +SECTION = "console/utils" > +LICENSE = "GPLv2" > +PR = "r0" > + > +LIC_FILES_CHKSUM = "file://LSB_Test.sh;beginline=3;endline=16;md5=7063bb54b04719df0716b513447f4fc0" > + > +SRC_URI = "file://LSB_Test.sh \ > + file://packages_list \ > + file://session \ > + " > + > +S=${WORKDIR} > + > +do_install() { > + install -d ${D}/usr/bin > + install -m 0755 ${S}/LSB_Test.sh ${D}/usr/bin > + install -d ${D}/opt/lsb-test > + install -m 0644 ${S}/packages_list ${D}/opt/lsb-test/packages_list > + install -m 0644 ${S}/session ${D}/opt/lsb-test/session > + if [ "${TARGET_ARCH}" == "i586" ];then > + sed -i -e 's/lsbarch/ia32/g' -e 's/targetarch/i486/g' ${D}/opt/lsb-test/packages_list > + sed -i -e 's/targetarch/x86/g' ${D}/opt/lsb-test/session > + fi > + if [ "${TARGET_ARCH}" == "x86_64" ];then > + sed -i -e 's/lsbarch/amd64/g' -e 's/targetarch/x86_64/g' ${D}/opt/lsb-test/packages_list > + sed -i -e 's/targetarch/x86-64/g' ${D}/opt/lsb-test/session > + fi > + if [ "${TARGET_ARCH}" == "powerpc" ];then > + sed -i -e 's/lsbarch/ppc32/g' -e 's/targetarch/ppc/g' ${D}/opt/lsb-test/packages_list > + sed -i -e 's/targetarch/PPC32/g' ${D}/opt/lsb-test/session > + fi > +} > + > +FILES_${PN} += "/opt/lsb-test/* \ > + " ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/3] lsbtest: Add recipe for LSB tests and automate test 2012-02-21 20:09 ` Saul Wold @ 2012-02-21 21:02 ` Khem Raj 2012-02-21 21:34 ` Mark Hatle 2012-02-21 21:40 ` Phil Blundell 2012-02-21 21:04 ` Koen Kooi 1 sibling, 2 replies; 9+ messages in thread From: Khem Raj @ 2012-02-21 21:02 UTC (permalink / raw) To: Patches and discussions about the oe-core layer On Tue, Feb 21, 2012 at 12:09 PM, Saul Wold <sgw@linux.intel.com> wrote: > I think you need to have a RDEPENDS on at a minimum for this lsbtest recipe > since it relies on RPM to install the packages. > > RDEPENDS = "rpm" > > that wont fly if someone is using opkg or dpkg ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/3] lsbtest: Add recipe for LSB tests and automate test 2012-02-21 21:02 ` Khem Raj @ 2012-02-21 21:34 ` Mark Hatle 2012-02-21 21:40 ` Phil Blundell 1 sibling, 0 replies; 9+ messages in thread From: Mark Hatle @ 2012-02-21 21:34 UTC (permalink / raw) To: openembedded-core On 2/21/12 3:02 PM, Khem Raj wrote: > On Tue, Feb 21, 2012 at 12:09 PM, Saul Wold<sgw@linux.intel.com> wrote: >> I think you need to have a RDEPENDS on at a minimum for this lsbtest recipe >> since it relies on RPM to install the packages. >> >> RDEPENDS = "rpm" >> >> > > that wont fly if someone is using opkg or dpkg Unfortunately rpm is a requirement of the LSB test suite itself. (This is a workstation/server oriented test suite, so the requirement is reasonable. Nobody should be deploying a system w/ the test suite installed.) --Mark > > _______________________________________________ > Openembedded-core mailing list > Openembedded-core@lists.openembedded.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-core ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/3] lsbtest: Add recipe for LSB tests and automate test 2012-02-21 21:02 ` Khem Raj 2012-02-21 21:34 ` Mark Hatle @ 2012-02-21 21:40 ` Phil Blundell 1 sibling, 0 replies; 9+ messages in thread From: Phil Blundell @ 2012-02-21 21:40 UTC (permalink / raw) To: Patches and discussions about the oe-core layer On Tue, 2012-02-21 at 13:02 -0800, Khem Raj wrote: > On Tue, Feb 21, 2012 at 12:09 PM, Saul Wold <sgw@linux.intel.com> wrote: > > I think you need to have a RDEPENDS on at a minimum for this lsbtest recipe > > since it relies on RPM to install the packages. > > > > RDEPENDS = "rpm" > > > > > > that wont fly if someone is using opkg or dpkg LSB requires that you be able to install RPMs, irrespective of what your native package format is. So, if you are using opkg and care about LSB compliance then you will probably need to engineer some sort of wrapper, and I guess that could legitimately PROVIDE rpm. To that end it might be nicer if that dependency was some sort of "virtual/rpm-for-crazy-lsb" sort of thing, but the general idea isn't an unreasonable one. p. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH 1/3] lsbtest: Add recipe for LSB tests and automate test 2012-02-21 20:09 ` Saul Wold 2012-02-21 21:02 ` Khem Raj @ 2012-02-21 21:04 ` Koen Kooi 1 sibling, 0 replies; 9+ messages in thread From: Koen Kooi @ 2012-02-21 21:04 UTC (permalink / raw) To: Patches and discussions about the oe-core layer Op 21 feb. 2012, om 21:09 heeft Saul Wold het volgende geschreven: > On 02/16/2012 10:02 PM, Yi Zhao wrote: >> The recipe is used for LSB tests. The script LSB_Test.sh does the >> following things: >> - setup LSB testing environment >> - download LSB rpm packages with list file packages_list from remote >> - install the packages >> - execute LSB testing with profile file session >> - collect the results >> >> Install packages_list and session files into ${D}/opt/lsb-test. >> >> [YOCTO #1567] >> --- >> meta/recipes-extended/lsb/lsbtest/LSB_Test.sh | 493 +++++++++++++++++++++++ >> meta/recipes-extended/lsb/lsbtest/packages_list | 50 +++ >> meta/recipes-extended/lsb/lsbtest/session | 194 +++++++++ >> meta/recipes-extended/lsb/lsbtest_1.0.bb | 36 ++ >> 4 files changed, 773 insertions(+), 0 deletions(-) >> create mode 100644 meta/recipes-extended/lsb/lsbtest/LSB_Test.sh >> create mode 100644 meta/recipes-extended/lsb/lsbtest/packages_list >> create mode 100644 meta/recipes-extended/lsb/lsbtest/session >> create mode 100644 meta/recipes-extended/lsb/lsbtest_1.0.bb > > I think you need to have a RDEPENDS on at a minimum for this lsbtest recipe since it relies on RPM to install the packages. > > RDEPENDS = "rpm" RDEPENDS_${PN} = .. regards, koen ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH 2/3] distro_tracking_fields: add information for lsbtest 2012-02-17 7:04 [PATCH 0/3] lsbtest: Add recipe for LSB tests and automate test Yi Zhao 2012-02-17 7:04 ` [PATCH 1/3] " Yi Zhao @ 2012-02-17 7:04 ` Yi Zhao 2012-02-17 7:04 ` [PATCH 3/3] task-core-lsb: add lsbtest to RDEPENDS_task-core-misc list Yi Zhao 2 siblings, 0 replies; 9+ messages in thread From: Yi Zhao @ 2012-02-17 7:04 UTC (permalink / raw) To: openembedded-core Add information for recipe lsbtest. --- .../conf/distro/include/distro_tracking_fields.inc | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/meta/conf/distro/include/distro_tracking_fields.inc b/meta/conf/distro/include/distro_tracking_fields.inc index 02aeabd..9ed4f41 100644 --- a/meta/conf/distro/include/distro_tracking_fields.inc +++ b/meta/conf/distro/include/distro_tracking_fields.inc @@ -5891,6 +5891,10 @@ RECIPE_MANUAL_CHECK_DATE_pn-lsbsetup = "Nov 28, 2011" DISTRO_PN_ALIAS_pn-lsbsetup = "Windriver" RECIPE_MAINTAINER_pn-lsbsetup = "Saul Wold <sgw@linux.intel.com>" +RECIPE_LATEST_VERSION_pn-lsbtest = "1.0" +RECIPE_LAST_UPDATE_pn-lsbtest = "Feb 17, 2012" +RECIPE_MAINTAINER_pn-lsbtest = "Yi Zhao <yi.zhao@windriver.com>" + RECIPE_LATEST_VERSION_pn-libxml-simple-perl = "2.18" RECIPE_LATEST_VERSION_pn-talloc = "2.0.5" -- 1.7.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH 3/3] task-core-lsb: add lsbtest to RDEPENDS_task-core-misc list 2012-02-17 7:04 [PATCH 0/3] lsbtest: Add recipe for LSB tests and automate test Yi Zhao 2012-02-17 7:04 ` [PATCH 1/3] " Yi Zhao 2012-02-17 7:04 ` [PATCH 2/3] distro_tracking_fields: add information for lsbtest Yi Zhao @ 2012-02-17 7:04 ` Yi Zhao 2 siblings, 0 replies; 9+ messages in thread From: Yi Zhao @ 2012-02-17 7:04 UTC (permalink / raw) To: openembedded-core --- meta/recipes-extended/tasks/task-core-lsb.bb | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/meta/recipes-extended/tasks/task-core-lsb.bb b/meta/recipes-extended/tasks/task-core-lsb.bb index c48ccf0..2767196 100644 --- a/meta/recipes-extended/tasks/task-core-lsb.bb +++ b/meta/recipes-extended/tasks/task-core-lsb.bb @@ -3,7 +3,7 @@ # DESCRIPTION = "Create Small Image Tasks" -PR = "r6" +PR = "r7" LICENSE = "MIT" LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58 \ file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420" @@ -116,6 +116,7 @@ RDEPENDS_task-core-misc = "\ groff \ lsb \ lsbsetup \ + lsbtest \ lsof \ man \ man-pages \ -- 1.7.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2012-02-21 21:49 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-02-17 7:04 [PATCH 0/3] lsbtest: Add recipe for LSB tests and automate test Yi Zhao 2012-02-17 7:04 ` [PATCH 1/3] " Yi Zhao 2012-02-21 20:09 ` Saul Wold 2012-02-21 21:02 ` Khem Raj 2012-02-21 21:34 ` Mark Hatle 2012-02-21 21:40 ` Phil Blundell 2012-02-21 21:04 ` Koen Kooi 2012-02-17 7:04 ` [PATCH 2/3] distro_tracking_fields: add information for lsbtest Yi Zhao 2012-02-17 7:04 ` [PATCH 3/3] task-core-lsb: add lsbtest to RDEPENDS_task-core-misc list Yi Zhao
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.