* building for OE pandaboard with angstrom
@ 2012-03-05 22:32 jfabernathy
2012-03-05 22:58 ` Denys Dmytriyenko
[not found] ` <4F554AAC.3010300@mlbassoc.com>
0 siblings, 2 replies; 7+ messages in thread
From: jfabernathy @ 2012-03-05 22:32 UTC (permalink / raw)
To: meta-ti@yoctoproject.org
Since the README says that to get the complete features of the
pandaboard you need to follow the instructions at the angstrom link
provided, I tried that. The console-image builds and boots, but the
systemd-gnome-image fails on a do_fetch. Error message is below:
| ERROR: Function failed: Fetcher failure for URL:
'ftp://ftp.debian.org/debian/pool/main/c/ca-certificates/ca-certificates_20111211.tar.gz'.
Checksum mismatch!
| File:
'/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
has md5 checksum 1047c5bb332e96cac982b2eaf76e84f7 when
f99a90a91b23338b4df765c0d18eba73 was expected
| File:
'/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
has sha256 checksum
73b8d9f14bd08da79cb2bbb6e8ec3c4de23f2213a2c25fbe07b720dbfc852d73 when
6f0633136d17ffef3ed0adfb171a00136a320f0fd79c9c75733ac02662a754a7 was
expected
NOTE: package ca-certificates-20111211-r0: task do_fetch: Failed
ERROR: Task 3064
(/home/jim/poky/setup-scripts/sources/meta-openembedded/meta-oe/recipes-support/ca-certificates/ca-certificates_20111211.bb,
do_fetch) failed with exit code '1'
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: building for OE pandaboard with angstrom
2012-03-05 22:32 building for OE pandaboard with angstrom jfabernathy
@ 2012-03-05 22:58 ` Denys Dmytriyenko
2012-03-06 2:29 ` jfabernathy
[not found] ` <4F554AAC.3010300@mlbassoc.com>
1 sibling, 1 reply; 7+ messages in thread
From: Denys Dmytriyenko @ 2012-03-05 22:58 UTC (permalink / raw)
To: jfabernathy; +Cc: meta-ti@yoctoproject.org
On Mon, Mar 05, 2012 at 05:32:55PM -0500, jfabernathy wrote:
> Since the README says that to get the complete features of the
> pandaboard you need to follow the instructions at the angstrom link
> provided, I tried that. The console-image builds and boots, but the
> systemd-gnome-image fails on a do_fetch. Error message is below:
>
> | ERROR: Function failed: Fetcher failure for URL: 'ftp://ftp.debian.org/debian/pool/main/c/ca-certificates/ca-certificates_20111211.tar.gz'.
> Checksum mismatch!
> | File: '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
> has md5 checksum 1047c5bb332e96cac982b2eaf76e84f7 when
> f99a90a91b23338b4df765c0d18eba73 was expected
> | File: '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
> has sha256 checksum
> 73b8d9f14bd08da79cb2bbb6e8ec3c4de23f2213a2c25fbe07b720dbfc852d73
> when
> 6f0633136d17ffef3ed0adfb171a00136a320f0fd79c9c75733ac02662a754a7 was
> expected
> NOTE: package ca-certificates-20111211-r0: task do_fetch: Failed
> ERROR: Task 3064 (/home/jim/poky/setup-scripts/sources/meta-openembedded/meta-oe/recipes-support/ca-certificates/ca-certificates_20111211.bb,
> do_fetch) failed with exit code '1'
The main debian server no longer hosts 20111211 version of ca-certificates.
The update to the current 20120212 version is currently pending in meta-oe:
http://thread.gmane.org/gmane.comp.handhelds.openembedded/50963
Meanwhile you can locate the correct version of the tarball and place it in
your downloads/ directory...
--
Denys
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: building for OE pandaboard with angstrom
[not found] ` <4F554AAC.3010300@mlbassoc.com>
@ 2012-03-06 0:48 ` jfabernathy
0 siblings, 0 replies; 7+ messages in thread
From: jfabernathy @ 2012-03-06 0:48 UTC (permalink / raw)
To: Gary Thomas, meta-ti@yoctoproject.org
On 03/05/2012 06:22 PM, Gary Thomas wrote:
> On 2012-03-05 15:32, jfabernathy wrote:
>> Since the README says that to get the complete features of the
>> pandaboard you need to follow the instructions at the angstrom link
>> provided, I tried that. The console-image builds
>> and boots, but the systemd-gnome-image fails on a do_fetch. Error
>> message is below:
>>
>> | ERROR: Function failed: Fetcher failure for URL:
>> 'ftp://ftp.debian.org/debian/pool/main/c/ca-certificates/ca-certificates_20111211.tar.gz'.
>> Checksum mismatch!
>> | File:
>> '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
>> has md5 checksum 1047c5bb332e96cac982b2eaf76e84f7 when
>> f99a90a91b23338b4df765c0d18eba73 was
>> expected
>> | File:
>> '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
>> has sha256 checksum
>> 73b8d9f14bd08da79cb2bbb6e8ec3c4de23f2213a2c25fbe07b720dbfc852d73 when
>> 6f0633136d17ffef3ed0adfb171a00136a320f0fd79c9c75733ac02662a754a7 was
>> expected
>> NOTE: package ca-certificates-20111211-r0: task do_fetch: Failed
>> ERROR: Task 3064
>> (/home/jim/poky/setup-scripts/sources/meta-openembedded/meta-oe/recipes-support/ca-certificates/ca-certificates_20111211.bb,
>> do_fetch) failed with exit code '1'
>
> If you haven't found them elsewhere, I have a copy of those certificates
> at http://www.mlbassoc.com/misc/ca-certificates_20111211.tar.gz
>
Never mind last dumb comment. I forgot to touch
ca-certificates_20111211.tar.gz.done.
JIm A
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: building for OE pandaboard with angstrom
2012-03-05 22:58 ` Denys Dmytriyenko
@ 2012-03-06 2:29 ` jfabernathy
2012-03-06 11:34 ` Gary Thomas
0 siblings, 1 reply; 7+ messages in thread
From: jfabernathy @ 2012-03-06 2:29 UTC (permalink / raw)
To: Denys Dmytriyenko; +Cc: meta-ti@yoctoproject.org
On 03/05/2012 05:58 PM, Denys Dmytriyenko wrote:
> On Mon, Mar 05, 2012 at 05:32:55PM -0500, jfabernathy wrote:
>> Since the README says that to get the complete features of the
>> pandaboard you need to follow the instructions at the angstrom link
>> provided, I tried that. The console-image builds and boots, but the
>> systemd-gnome-image fails on a do_fetch. Error message is below:
>>
>> | ERROR: Function failed: Fetcher failure for URL: 'ftp://ftp.debian.org/debian/pool/main/c/ca-certificates/ca-certificates_20111211.tar.gz'.
>> Checksum mismatch!
>> | File: '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
>> has md5 checksum 1047c5bb332e96cac982b2eaf76e84f7 when
>> f99a90a91b23338b4df765c0d18eba73 was expected
>> | File: '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
>> has sha256 checksum
>> 73b8d9f14bd08da79cb2bbb6e8ec3c4de23f2213a2c25fbe07b720dbfc852d73
>> when
>> 6f0633136d17ffef3ed0adfb171a00136a320f0fd79c9c75733ac02662a754a7 was
>> expected
>> NOTE: package ca-certificates-20111211-r0: task do_fetch: Failed
>> ERROR: Task 3064 (/home/jim/poky/setup-scripts/sources/meta-openembedded/meta-oe/recipes-support/ca-certificates/ca-certificates_20111211.bb,
>> do_fetch) failed with exit code '1'
> The main debian server no longer hosts 20111211 version of ca-certificates.
> The update to the current 20120212 version is currently pending in meta-oe:
>
> http://thread.gmane.org/gmane.comp.handhelds.openembedded/50963
>
> Meanwhile you can locate the correct version of the tarball and place it in
> your downloads/ directory...
>
I got the systemd-gnome-image to built this time, but the image does not
completely boot. I followed the instruction in poky/README.hardware for
Beagleboard to create the SDcard. I just took a chance that it would be
close enough for Pandaboard. I'm guessing there are some changes to the
instructions for Pandaboard. If true, where are they located??
Jim A
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: building for OE pandaboard with angstrom
2012-03-06 2:29 ` jfabernathy
@ 2012-03-06 11:34 ` Gary Thomas
2012-03-06 11:50 ` Jim Abernathy
0 siblings, 1 reply; 7+ messages in thread
From: Gary Thomas @ 2012-03-06 11:34 UTC (permalink / raw)
To: jfabernathy; +Cc: meta-ti@yoctoproject.org
On 2012-03-05 19:29, jfabernathy wrote:
> On 03/05/2012 05:58 PM, Denys Dmytriyenko wrote:
>> On Mon, Mar 05, 2012 at 05:32:55PM -0500, jfabernathy wrote:
>>> Since the README says that to get the complete features of the
>>> pandaboard you need to follow the instructions at the angstrom link
>>> provided, I tried that. The console-image builds and boots, but the
>>> systemd-gnome-image fails on a do_fetch. Error message is below:
>>>
>>> | ERROR: Function failed: Fetcher failure for URL: 'ftp://ftp.debian.org/debian/pool/main/c/ca-certificates/ca-certificates_20111211.tar.gz'.
>>> Checksum mismatch!
>>> | File: '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
>>> has md5 checksum 1047c5bb332e96cac982b2eaf76e84f7 when
>>> f99a90a91b23338b4df765c0d18eba73 was expected
>>> | File: '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
>>> has sha256 checksum
>>> 73b8d9f14bd08da79cb2bbb6e8ec3c4de23f2213a2c25fbe07b720dbfc852d73
>>> when
>>> 6f0633136d17ffef3ed0adfb171a00136a320f0fd79c9c75733ac02662a754a7 was
>>> expected
>>> NOTE: package ca-certificates-20111211-r0: task do_fetch: Failed
>>> ERROR: Task 3064 (/home/jim/poky/setup-scripts/sources/meta-openembedded/meta-oe/recipes-support/ca-certificates/ca-certificates_20111211.bb,
>>> do_fetch) failed with exit code '1'
>> The main debian server no longer hosts 20111211 version of ca-certificates.
>> The update to the current 20120212 version is currently pending in meta-oe:
>>
>> http://thread.gmane.org/gmane.comp.handhelds.openembedded/50963
>>
>> Meanwhile you can locate the correct version of the tarball and place it in
>> your downloads/ directory...
>>
> I got the systemd-gnome-image to built this time, but the image does not completely boot. I followed the instruction in poky/README.hardware for Beagleboard to create the SDcard. I
> just took a chance that it would be close enough for Pandaboard. I'm guessing there are some changes to the instructions for Pandaboard. If true, where are they located??
What do you mean "does not completely boot?"
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: building for OE pandaboard with angstrom
2012-03-06 11:34 ` Gary Thomas
@ 2012-03-06 11:50 ` Jim Abernathy
2012-03-06 11:57 ` Gary Thomas
0 siblings, 1 reply; 7+ messages in thread
From: Jim Abernathy @ 2012-03-06 11:50 UTC (permalink / raw)
To: Gary Thomas; +Cc: meta-ti@yoctoproject.org
Well I guess I didn't wait long enough. Apparently the first boot takes 15 minutes to completely boot to the login prompt. I ignored the board and went back to email. And it got to a prompt eventually. I was expecting a GUI. After rebooting it came up to a GUI that looked like a gnome desktop. I still wonder about SD card differences and boot script for a Pandaboard vs. Beagleboard.
Jim Abernathy
On Mar 6, 2012, at 6:34 AM, Gary Thomas <gary@mlbassoc.com> wrote:
> On 2012-03-05 19:29, jfabernathy wrote:
>> On 03/05/2012 05:58 PM, Denys Dmytriyenko wrote:
>>> On Mon, Mar 05, 2012 at 05:32:55PM -0500, jfabernathy wrote:
>>>> Since the README says that to get the complete features of the
>>>> pandaboard you need to follow the instructions at the angstrom link
>>>> provided, I tried that. The console-image builds and boots, but the
>>>> systemd-gnome-image fails on a do_fetch. Error message is below:
>>>>
>>>> | ERROR: Function failed: Fetcher failure for URL: 'ftp://ftp.debian.org/debian/pool/main/c/ca-certificates/ca-certificates_20111211.tar.gz'.
>>>> Checksum mismatch!
>>>> | File: '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
>>>> has md5 checksum 1047c5bb332e96cac982b2eaf76e84f7 when
>>>> f99a90a91b23338b4df765c0d18eba73 was expected
>>>> | File: '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
>>>> has sha256 checksum
>>>> 73b8d9f14bd08da79cb2bbb6e8ec3c4de23f2213a2c25fbe07b720dbfc852d73
>>>> when
>>>> 6f0633136d17ffef3ed0adfb171a00136a320f0fd79c9c75733ac02662a754a7 was
>>>> expected
>>>> NOTE: package ca-certificates-20111211-r0: task do_fetch: Failed
>>>> ERROR: Task 3064 (/home/jim/poky/setup-scripts/sources/meta-openembedded/meta-oe/recipes-support/ca-certificates/ca-certificates_20111211.bb,
>>>> do_fetch) failed with exit code '1'
>>> The main debian server no longer hosts 20111211 version of ca-certificates.
>>> The update to the current 20120212 version is currently pending in meta-oe:
>>>
>>> http://thread.gmane.org/gmane.comp.handhelds.openembedded/50963
>>>
>>> Meanwhile you can locate the correct version of the tarball and place it in
>>> your downloads/ directory...
>>>
>> I got the systemd-gnome-image to built this time, but the image does not completely boot. I followed the instruction in poky/README.hardware for Beagleboard to create the SDcard. I
>> just took a chance that it would be close enough for Pandaboard. I'm guessing there are some changes to the instructions for Pandaboard. If true, where are they located??
>
> What do you mean "does not completely boot?"
>
> --
> ------------------------------------------------------------
> Gary Thomas | Consulting for the
> MLB Associates | Embedded world
> ------------------------------------------------------------
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: building for OE pandaboard with angstrom
2012-03-06 11:50 ` Jim Abernathy
@ 2012-03-06 11:57 ` Gary Thomas
0 siblings, 0 replies; 7+ messages in thread
From: Gary Thomas @ 2012-03-06 11:57 UTC (permalink / raw)
To: Jim Abernathy; +Cc: meta-ti@yoctoproject.org
On 2012-03-06 04:50, Jim Abernathy wrote:
> Well I guess I didn't wait long enough. Apparently the first boot takes 15 minutes to completely boot to the login prompt. I ignored the board and went back to email. And it got to a prompt eventually. I was expecting a GUI. After rebooting it came up to a GUI that looked like a gnome desktop. I still wonder about SD card differences and boot script for a Pandaboard vs. Beagleboard.
This is actually pretty common behaviour for Angstrom, at least
the larger images (like systemd-gnome) - there's a lot of setup
operations that have to be done on the board and they only happen
the first boot. Subsequent boots will not suffer from this.
> On Mar 6, 2012, at 6:34 AM, Gary Thomas<gary@mlbassoc.com> wrote:
>
>> On 2012-03-05 19:29, jfabernathy wrote:
>>> On 03/05/2012 05:58 PM, Denys Dmytriyenko wrote:
>>>> On Mon, Mar 05, 2012 at 05:32:55PM -0500, jfabernathy wrote:
>>>>> Since the README says that to get the complete features of the
>>>>> pandaboard you need to follow the instructions at the angstrom link
>>>>> provided, I tried that. The console-image builds and boots, but the
>>>>> systemd-gnome-image fails on a do_fetch. Error message is below:
>>>>>
>>>>> | ERROR: Function failed: Fetcher failure for URL: 'ftp://ftp.debian.org/debian/pool/main/c/ca-certificates/ca-certificates_20111211.tar.gz'.
>>>>> Checksum mismatch!
>>>>> | File: '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
>>>>> has md5 checksum 1047c5bb332e96cac982b2eaf76e84f7 when
>>>>> f99a90a91b23338b4df765c0d18eba73 was expected
>>>>> | File: '/home/jim/poky/setup-scripts/sources/downloads/ca-certificates_20111211.tar.gz'
>>>>> has sha256 checksum
>>>>> 73b8d9f14bd08da79cb2bbb6e8ec3c4de23f2213a2c25fbe07b720dbfc852d73
>>>>> when
>>>>> 6f0633136d17ffef3ed0adfb171a00136a320f0fd79c9c75733ac02662a754a7 was
>>>>> expected
>>>>> NOTE: package ca-certificates-20111211-r0: task do_fetch: Failed
>>>>> ERROR: Task 3064 (/home/jim/poky/setup-scripts/sources/meta-openembedded/meta-oe/recipes-support/ca-certificates/ca-certificates_20111211.bb,
>>>>> do_fetch) failed with exit code '1'
>>>> The main debian server no longer hosts 20111211 version of ca-certificates.
>>>> The update to the current 20120212 version is currently pending in meta-oe:
>>>>
>>>> http://thread.gmane.org/gmane.comp.handhelds.openembedded/50963
>>>>
>>>> Meanwhile you can locate the correct version of the tarball and place it in
>>>> your downloads/ directory...
>>>>
>>> I got the systemd-gnome-image to built this time, but the image does not completely boot. I followed the instruction in poky/README.hardware for Beagleboard to create the SDcard. I
>>> just took a chance that it would be close enough for Pandaboard. I'm guessing there are some changes to the instructions for Pandaboard. If true, where are they located??
>>
>> What do you mean "does not completely boot?"
>>
>> --
>> ------------------------------------------------------------
>> Gary Thomas | Consulting for the
>> MLB Associates | Embedded world
>> ------------------------------------------------------------
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-03-06 11:57 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-05 22:32 building for OE pandaboard with angstrom jfabernathy
2012-03-05 22:58 ` Denys Dmytriyenko
2012-03-06 2:29 ` jfabernathy
2012-03-06 11:34 ` Gary Thomas
2012-03-06 11:50 ` Jim Abernathy
2012-03-06 11:57 ` Gary Thomas
[not found] ` <4F554AAC.3010300@mlbassoc.com>
2012-03-06 0:48 ` jfabernathy
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.