All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@ti.com>
To: Paul Walmsley <paul@pwsan.com>
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 00/15] ARM: OMAP4: hwmod data: add almost all remaining IP blocks
Date: Thu, 08 Mar 2012 17:01:51 +0530	[thread overview]
Message-ID: <4F5898A7.5040005@ti.com> (raw)
In-Reply-To: <20120308104918.14753.69281.stgit@dusk>

Hi Paul,

On Thursday 08 March 2012 04:21 PM, Paul Walmsley wrote:
> Hi
>
> This series adds basic hwmods for all but one of the remaining
> OMAP4 IP blocks that can be meaningfully controlled by the
> kernel.  (The remaining IP block is the USIM - there's a clocking
> problem that requires further investigation to resolve.)
>
> There are a few new boot-time warnings added by this series:
>
> [    0.280548] omap_hwmod: trace_clk_div_ck: missing clockdomain for trace_clk_div_ck.
> [    0.302429] omap_hwmod: ddrphy_ck: missing clockdomain for ddrphy_ck.
> [    0.319519] omap_hwmod: sl2if: cannot be enabled for reset (3)
>
> These messages will be resolved by subsequent patches, and, while annoying,
> should not affect the operation of the system.
>
> These patches have been boot-tested and suspend-tested on a
> OMAP44xx PandaBoard.
>
> The series is intended to apply on the
> 'hwmod_remove_link_arrays_cleanup_3.4' branch, posted previously.
>
> These patches are also available via git from git://git.pwsan.com/linux-2.6
> in the branch "hwmod_enable_remaining_hwmods_devel_3.4".

Could not find this branch on your tree. Found a
'enable_remaining_omap4_hwmods' instead, but that seems to
be an old branch.

regards,
Rajendra
>
>
> - Paul
>
> ---
>
> hwmod_enable_remaining_hwmods_devel_3.4
>     text	   data	    bss	    dec	    hex	filename
> 6590067	 677452	5593500	12861019	 c43e5b	vmlinux.omap2plus_defconfig.orig
> 6594227	 684620	5593500	12872347	 c46a9b	vmlinux.omap2plus_defconfig
>
> Benoît Cousson (6):
>        ARM: OMAP4: hwmod data: add GPMC
>        ARM: OMAP4: hwmod data: add the Slimbus IP blocks
>        ARM: OMAP4: hwmod data: add McASP
>        ARM: OMAP4: hwmod data: add remaining USB-related IP blocks
>        ARM: OMAP4: hwmod data: add the OCP-WP IP block
>        ARM: OMAP4: hwmod data: add DEBUGSS skeleton
>
> Ming Lei (1):
>        ARM: OMAP4: hwmod data: introduce fdif(face detect module) hwmod
>
> Paul Walmsley (8):
>        ARM: OMAP2+: clockdomains: make {prm,cm}_clkdm common
>        ARM: OMAP4: hwmod data: add HDQ/1-wire
>        ARM: OMAP4: hwmod data: add EMIF1 and 2
>        ARM: OMAP4: hwmod data: add GPU
>        ARM: OMAP4: hwmod data: add some interconnect-related IP blocks
>        ARM: OMAP4: hwmod data: add OCM RAM IP block
>        ARM: OMAP4: hwmod data: add System Control Module
>        ARM: OMAP4: hwmod data: add PRCM and related IP blocks
>
>
>   arch/arm/mach-omap2/Makefile                     |    8
>   arch/arm/mach-omap2/clockdomain44xx.c            |    6
>   arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c |   10
>   arch/arm/mach-omap2/clockdomains44xx_data.c      |    2
>   arch/arm/mach-omap2/clockdomains_common_data.c   |   24
>   arch/arm/mach-omap2/omap_hwmod_44xx_data.c       | 1473 +++++++++++++++++++++-
>   arch/arm/plat-omap/include/plat/omap_hwmod.h     |    1
>   7 files changed, 1443 insertions(+), 81 deletions(-)
>   create mode 100644 arch/arm/mach-omap2/clockdomains_common_data.c
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: rnayak@ti.com (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 00/15] ARM: OMAP4: hwmod data: add almost all remaining IP blocks
Date: Thu, 08 Mar 2012 17:01:51 +0530	[thread overview]
Message-ID: <4F5898A7.5040005@ti.com> (raw)
In-Reply-To: <20120308104918.14753.69281.stgit@dusk>

Hi Paul,

On Thursday 08 March 2012 04:21 PM, Paul Walmsley wrote:
> Hi
>
> This series adds basic hwmods for all but one of the remaining
> OMAP4 IP blocks that can be meaningfully controlled by the
> kernel.  (The remaining IP block is the USIM - there's a clocking
> problem that requires further investigation to resolve.)
>
> There are a few new boot-time warnings added by this series:
>
> [    0.280548] omap_hwmod: trace_clk_div_ck: missing clockdomain for trace_clk_div_ck.
> [    0.302429] omap_hwmod: ddrphy_ck: missing clockdomain for ddrphy_ck.
> [    0.319519] omap_hwmod: sl2if: cannot be enabled for reset (3)
>
> These messages will be resolved by subsequent patches, and, while annoying,
> should not affect the operation of the system.
>
> These patches have been boot-tested and suspend-tested on a
> OMAP44xx PandaBoard.
>
> The series is intended to apply on the
> 'hwmod_remove_link_arrays_cleanup_3.4' branch, posted previously.
>
> These patches are also available via git from git://git.pwsan.com/linux-2.6
> in the branch "hwmod_enable_remaining_hwmods_devel_3.4".

Could not find this branch on your tree. Found a
'enable_remaining_omap4_hwmods' instead, but that seems to
be an old branch.

regards,
Rajendra
>
>
> - Paul
>
> ---
>
> hwmod_enable_remaining_hwmods_devel_3.4
>     text	   data	    bss	    dec	    hex	filename
> 6590067	 677452	5593500	12861019	 c43e5b	vmlinux.omap2plus_defconfig.orig
> 6594227	 684620	5593500	12872347	 c46a9b	vmlinux.omap2plus_defconfig
>
> Beno?t Cousson (6):
>        ARM: OMAP4: hwmod data: add GPMC
>        ARM: OMAP4: hwmod data: add the Slimbus IP blocks
>        ARM: OMAP4: hwmod data: add McASP
>        ARM: OMAP4: hwmod data: add remaining USB-related IP blocks
>        ARM: OMAP4: hwmod data: add the OCP-WP IP block
>        ARM: OMAP4: hwmod data: add DEBUGSS skeleton
>
> Ming Lei (1):
>        ARM: OMAP4: hwmod data: introduce fdif(face detect module) hwmod
>
> Paul Walmsley (8):
>        ARM: OMAP2+: clockdomains: make {prm,cm}_clkdm common
>        ARM: OMAP4: hwmod data: add HDQ/1-wire
>        ARM: OMAP4: hwmod data: add EMIF1 and 2
>        ARM: OMAP4: hwmod data: add GPU
>        ARM: OMAP4: hwmod data: add some interconnect-related IP blocks
>        ARM: OMAP4: hwmod data: add OCM RAM IP block
>        ARM: OMAP4: hwmod data: add System Control Module
>        ARM: OMAP4: hwmod data: add PRCM and related IP blocks
>
>
>   arch/arm/mach-omap2/Makefile                     |    8
>   arch/arm/mach-omap2/clockdomain44xx.c            |    6
>   arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c |   10
>   arch/arm/mach-omap2/clockdomains44xx_data.c      |    2
>   arch/arm/mach-omap2/clockdomains_common_data.c   |   24
>   arch/arm/mach-omap2/omap_hwmod_44xx_data.c       | 1473 +++++++++++++++++++++-
>   arch/arm/plat-omap/include/plat/omap_hwmod.h     |    1
>   7 files changed, 1443 insertions(+), 81 deletions(-)
>   create mode 100644 arch/arm/mach-omap2/clockdomains_common_data.c
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2012-03-08 11:31 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-08 10:51 [PATCH 00/15] ARM: OMAP4: hwmod data: add almost all remaining IP blocks Paul Walmsley
2012-03-08 10:51 ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 01/15] ARM: OMAP2+: clockdomains: make {prm,cm}_clkdm common Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 02/15] ARM: OMAP4: hwmod data: introduce fdif(face detect module) hwmod Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 03/15] ARM: OMAP4: hwmod data: add HDQ/1-wire Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 04/15] ARM: OMAP4: hwmod data: add GPMC Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 05/15] ARM: OMAP4: hwmod data: add EMIF1 and 2 Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 06/15] ARM: OMAP4: hwmod data: add GPU Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 07/15] ARM: OMAP4: hwmod data: add the Slimbus IP blocks Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 08/15] ARM: OMAP4: hwmod data: add McASP Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 09/15] ARM: OMAP4: hwmod data: add some interconnect-related IP blocks Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 10/15] ARM: OMAP4: hwmod data: add remaining USB-related " Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 12/15] ARM: OMAP4: hwmod data: add the OCP-WP IP block Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 11/15] ARM: OMAP4: hwmod data: add OCM RAM " Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 13/15] ARM: OMAP4: hwmod data: add System Control Module Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 15/15] ARM: OMAP4: hwmod data: add DEBUGSS skeleton Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 10:51 ` [PATCH 14/15] ARM: OMAP4: hwmod data: add PRCM and related IP blocks Paul Walmsley
2012-03-08 10:51   ` Paul Walmsley
2012-03-08 11:31 ` Rajendra Nayak [this message]
2012-03-08 11:31   ` [PATCH 00/15] ARM: OMAP4: hwmod data: add almost all remaining " Rajendra Nayak
2012-03-08 17:05   ` Paul Walmsley
2012-03-08 17:05     ` Paul Walmsley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4F5898A7.5040005@ti.com \
    --to=rnayak@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=paul@pwsan.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.