* [PATCH v4 00/12] ARM: EXYNOS: add support new EXYNOS5250
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds support EXYNOS5250 SoC which has two A15 cores
can be used on mobile and tablet devices.
Changes since v3:
- fix external interrupt number
- use local helper function instead of irq_to_gpio()
- fix and expand commit descriptions
- update dts file
Changes since v2:
- update interrupt number declaration for single zImage
of exynos4 and exynos5
- allow to select for exynos4 and exynos5 together
- add support EINT for exynos4 and exynos5
- add l2 cache initializer for exynos5250
Changes since v1:
- address comments from mailing list
- update the option accordingly common.[ch]
- update clock part
- get rid of static mapping for uart
- add device tree enabled board file(mach-exynos5-dt.c)
- add initial dts file for EXYNOS5250(SoC), SMDK5250(Board)
[PATCH v4 01/12] ARM: EXYNOS: to declare static for mach-exynos/common.c
[PATCH v4 02/12] ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts()
[PATCH v4 03/12] ARM: EXYNOS: add clock part for EXYNOS5250 SoC
[PATCH v4 04/12] ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5
[PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
[PATCH v4 06/12] ARM: EXYNOS: add support for EXYNOS5250 SoC
[PATCH v4 07/12] ARM: EXYNOS: add interrupt definitions for EXYNOS5250
[PATCH v4 08/12] ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5
[PATCH v4 09/12] ARM: EXYNOS: add support get_core_count() for EXYNOS5250
[PATCH v4 10/12] ARM: EXYNOS: add support ARCH_EXYNOS5 for EXYNOS5 SoCs
[PATCH v4 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5
[PATCH v4 12/12] ARM: dts: add initial dts file for EXYNOS5250, SMDK5250
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 01/12] ARM: EXYNOS: to declare static for mach-exynos/common.c
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: arnd, olof, Kukjin Kim
According to commit cc511b8d84d8 ("ARM: 7257/1: EXYNOS: introduce
arch/arm/mach-exynos/common.[ch]"), we don't need to declare extern
for exynos4_map_io(), exynos4_init_clocks(), exynos4_init_uarts(),
and exynos_init(). And the exynos4210_register_clocks() and
exynos4212_register_clocks depend on each SoC not ARCH_EXYNOS4.
So this patch fixed above.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/common.c | 13 +++++++++----
arch/arm/mach-exynos/common.h | 28 +++++++++++-----------------
2 files changed, 20 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 34e8190..a1f8a99 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -50,6 +50,11 @@ static const char name_exynos4210[] = "EXYNOS4210";
static const char name_exynos4212[] = "EXYNOS4212";
static const char name_exynos4412[] = "EXYNOS4412";
+static void exynos4_map_io(void);
+static void exynos4_init_clocks(int xtal);
+static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+static int exynos_init(void);
+
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = EXYNOS4210_CPU_ID,
@@ -225,7 +230,7 @@ void __init exynos_init_io(struct map_desc *mach_desc, int size)
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
-void __init exynos4_map_io(void)
+static void __init exynos4_map_io(void)
{
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
@@ -256,7 +261,7 @@ void __init exynos4_map_io(void)
s5p_hdmi_setname("exynos4-hdmi");
}
-void __init exynos4_init_clocks(int xtal)
+static void __init exynos4_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -456,7 +461,7 @@ static int __init exynos4_l2x0_cache_init(void)
early_initcall(exynos4_l2x0_cache_init);
#endif
-int __init exynos_init(void)
+static int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
return device_register(&exynos4_dev);
@@ -464,7 +469,7 @@ int __init exynos_init(void)
/* uart registration process */
-void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
struct s3c2410_uartcfg *tcfg = cfg;
u32 ucnt;
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 8c1efe6..b32c6b5 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -12,39 +12,33 @@
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
+extern struct sys_timer exynos4_timer;
+
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos4_init_irq(void);
+void exynos4_restart(char mode, const char *cmd);
#ifdef CONFIG_ARCH_EXYNOS4
void exynos4_register_clocks(void);
void exynos4_setup_clocks(void);
-void exynos4210_register_clocks(void);
-void exynos4212_register_clocks(void);
-
#else
#define exynos4_register_clocks()
#define exynos4_setup_clocks()
-
-#define exynos4210_register_clocks()
-#define exynos4212_register_clocks()
#endif
-void exynos4_restart(char mode, const char *cmd);
+#ifdef CONFIG_CPU_EXYNOS4210
+void exynos4210_register_clocks(void);
-extern struct sys_timer exynos4_timer;
+#else
+#define exynos4210_register_clocks()
+#endif
-#ifdef CONFIG_ARCH_EXYNOS
-extern int exynos_init(void);
-extern void exynos4_map_io(void);
-extern void exynos4_init_clocks(int xtal);
-extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+#ifdef CONFIG_SOC_EXYNOS4212
+void exynos4212_register_clocks(void);
#else
-#define exynos4_init_clocks NULL
-#define exynos4_init_uarts NULL
-#define exynos4_map_io NULL
-#define exynos_init NULL
+#define exynos4212_register_clocks()
#endif
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 01/12] ARM: EXYNOS: to declare static for mach-exynos/common.c
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
According to commit cc511b8d84d8 ("ARM: 7257/1: EXYNOS: introduce
arch/arm/mach-exynos/common.[ch]"), we don't need to declare extern
for exynos4_map_io(), exynos4_init_clocks(), exynos4_init_uarts(),
and exynos_init(). And the exynos4210_register_clocks() and
exynos4212_register_clocks depend on each SoC not ARCH_EXYNOS4.
So this patch fixed above.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/common.c | 13 +++++++++----
arch/arm/mach-exynos/common.h | 28 +++++++++++-----------------
2 files changed, 20 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 34e8190..a1f8a99 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -50,6 +50,11 @@ static const char name_exynos4210[] = "EXYNOS4210";
static const char name_exynos4212[] = "EXYNOS4212";
static const char name_exynos4412[] = "EXYNOS4412";
+static void exynos4_map_io(void);
+static void exynos4_init_clocks(int xtal);
+static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+static int exynos_init(void);
+
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = EXYNOS4210_CPU_ID,
@@ -225,7 +230,7 @@ void __init exynos_init_io(struct map_desc *mach_desc, int size)
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
-void __init exynos4_map_io(void)
+static void __init exynos4_map_io(void)
{
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
@@ -256,7 +261,7 @@ void __init exynos4_map_io(void)
s5p_hdmi_setname("exynos4-hdmi");
}
-void __init exynos4_init_clocks(int xtal)
+static void __init exynos4_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -456,7 +461,7 @@ static int __init exynos4_l2x0_cache_init(void)
early_initcall(exynos4_l2x0_cache_init);
#endif
-int __init exynos_init(void)
+static int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
return device_register(&exynos4_dev);
@@ -464,7 +469,7 @@ int __init exynos_init(void)
/* uart registration process */
-void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
struct s3c2410_uartcfg *tcfg = cfg;
u32 ucnt;
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 8c1efe6..b32c6b5 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -12,39 +12,33 @@
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
+extern struct sys_timer exynos4_timer;
+
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos4_init_irq(void);
+void exynos4_restart(char mode, const char *cmd);
#ifdef CONFIG_ARCH_EXYNOS4
void exynos4_register_clocks(void);
void exynos4_setup_clocks(void);
-void exynos4210_register_clocks(void);
-void exynos4212_register_clocks(void);
-
#else
#define exynos4_register_clocks()
#define exynos4_setup_clocks()
-
-#define exynos4210_register_clocks()
-#define exynos4212_register_clocks()
#endif
-void exynos4_restart(char mode, const char *cmd);
+#ifdef CONFIG_CPU_EXYNOS4210
+void exynos4210_register_clocks(void);
-extern struct sys_timer exynos4_timer;
+#else
+#define exynos4210_register_clocks()
+#endif
-#ifdef CONFIG_ARCH_EXYNOS
-extern int exynos_init(void);
-extern void exynos4_map_io(void);
-extern void exynos4_init_clocks(int xtal);
-extern void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+#ifdef CONFIG_SOC_EXYNOS4212
+void exynos4212_register_clocks(void);
#else
-#define exynos4_init_clocks NULL
-#define exynos4_init_uarts NULL
-#define exynos4_map_io NULL
-#define exynos_init NULL
+#define exynos4212_register_clocks()
#endif
#endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v4 02/12] ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts()
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: arnd, olof, Kukjin Kim
Since exynos4_init_uarts() can be used for EXYNOS5 SoCs,
this patch changes the name of function to exynos_init_uarts().
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/common.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index a1f8a99..02eed29 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -52,7 +52,7 @@ static const char name_exynos4412[] = "EXYNOS4412";
static void exynos4_map_io(void);
static void exynos4_init_clocks(int xtal);
-static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
@@ -61,7 +61,7 @@ static struct cpu_table cpu_ids[] __initdata = {
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
+ .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4210,
}, {
@@ -69,7 +69,7 @@ static struct cpu_table cpu_ids[] __initdata = {
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
+ .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4212,
}, {
@@ -77,7 +77,7 @@ static struct cpu_table cpu_ids[] __initdata = {
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
+ .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
},
@@ -469,7 +469,7 @@ static int __init exynos_init(void)
/* uart registration process */
-static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
struct s3c2410_uartcfg *tcfg = cfg;
u32 ucnt;
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 02/12] ARM: EXYNOS: use exynos_init_uarts() instead of exynos4_init_uarts()
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
Since exynos4_init_uarts() can be used for EXYNOS5 SoCs,
this patch changes the name of function to exynos_init_uarts().
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/common.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index a1f8a99..02eed29 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -52,7 +52,7 @@ static const char name_exynos4412[] = "EXYNOS4412";
static void exynos4_map_io(void);
static void exynos4_init_clocks(int xtal);
-static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
@@ -61,7 +61,7 @@ static struct cpu_table cpu_ids[] __initdata = {
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
+ .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4210,
}, {
@@ -69,7 +69,7 @@ static struct cpu_table cpu_ids[] __initdata = {
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
+ .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4212,
}, {
@@ -77,7 +77,7 @@ static struct cpu_table cpu_ids[] __initdata = {
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init_clocks = exynos4_init_clocks,
- .init_uarts = exynos4_init_uarts,
+ .init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
},
@@ -469,7 +469,7 @@ static int __init exynos_init(void)
/* uart registration process */
-static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
+static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
struct s3c2410_uartcfg *tcfg = cfg;
u32 ucnt;
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v4 03/12] ARM: EXYNOS: add clock part for EXYNOS5250 SoC
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: arnd, olof, Kukjin Kim
This patch adds clock-exynos5.c for EXYNOS5250 now
and that can be used for other EXYNOS5 SoCs later.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/clock-exynos5.c | 1247 ++++++++++++++++++++++++
arch/arm/mach-exynos/include/mach/regs-clock.h | 62 ++
arch/arm/plat-s5p/clock.c | 36 +
arch/arm/plat-samsung/include/plat/s5p-clock.h | 6 +
4 files changed, 1351 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-exynos/clock-exynos5.c
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
new file mode 100644
index 0000000..d013982
--- /dev/null
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -0,0 +1,1247 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Clock support for EXYNOS5 SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/pm.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
+
+#include "common.h"
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save exynos5_clock_save[] = {
+ /* will be implemented */
+};
+#endif
+
+static struct clk exynos5_clk_sclk_dptxphy = {
+ .name = "sclk_dptx",
+};
+
+static struct clk exynos5_clk_sclk_hdmi24m = {
+ .name = "sclk_hdmi24m",
+ .rate = 24000000,
+};
+
+static struct clk exynos5_clk_sclk_hdmi27m = {
+ .name = "sclk_hdmi27m",
+ .rate = 27000000,
+};
+
+static struct clk exynos5_clk_sclk_hdmiphy = {
+ .name = "sclk_hdmiphy",
+};
+
+static struct clk exynos5_clk_sclk_usbphy = {
+ .name = "sclk_usbphy",
+ .rate = 48000000,
+};
+
+static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable);
+}
+
+static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable);
+}
+
+static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable);
+}
+
+static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable);
+}
+
+static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
+}
+
+static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
+}
+
+static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable);
+}
+
+static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable);
+}
+
+static int exynos5_clk_block_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable);
+}
+
+static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
+}
+
+static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable);
+}
+
+static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
+}
+
+static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable);
+}
+
+static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
+}
+
+/* Core list of CMU_CPU side */
+
+static struct clksrc_clk exynos5_clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_apll = {
+ .clk = {
+ .name = "sclk_apll",
+ .parent = &exynos5_clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_bpll = {
+ .clk = {
+ .name = "mout_bpll",
+ },
+ .sources = &clk_src_bpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_bpll_user_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &exynos5_clk_mout_bpll.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_bpll_user = {
+ .sources = exynos5_clk_src_bpll_user_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_user_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_bpll_user = {
+ .clk = {
+ .name = "mout_bpll_user",
+ },
+ .sources = &exynos5_clk_src_bpll_user,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_cpll = {
+ .clk = {
+ .name = "mout_cpll",
+ },
+ .sources = &clk_src_cpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
+};
+
+struct clksrc_clk exynos5_clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
+};
+
+static struct clk *exynos_clkset_vpllsrc_list[] = {
+ [0] = &clk_fin_vpll,
+ [1] = &exynos5_clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources exynos5_clkset_vpllsrc = {
+ .sources = exynos_clkset_vpllsrc_list,
+ .nr_sources = ARRAY_SIZE(exynos_clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk exynos5_clk_vpllsrc = {
+ .clk = {
+ .name = "vpll_src",
+ .enable = exynos5_clksrc_mask_top_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos5_clkset_vpllsrc,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_sclk_vpll_list[] = {
+ [0] = &exynos5_clk_vpllsrc.clk,
+ [1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources exynos5_clkset_sclk_vpll = {
+ .sources = exynos5_clkset_sclk_vpll_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk exynos5_clk_sclk_vpll = {
+ .clk = {
+ .name = "sclk_vpll",
+ },
+ .sources = &exynos5_clkset_sclk_vpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_pixel = {
+ .clk = {
+ .name = "sclk_pixel",
+ .parent = &exynos5_clk_sclk_vpll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 },
+};
+
+static struct clk *exynos5_clkset_sclk_hdmi_list[] = {
+ [0] = &exynos5_clk_sclk_pixel.clk,
+ [1] = &exynos5_clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources exynos5_clkset_sclk_hdmi = {
+ .sources = exynos5_clkset_sclk_hdmi_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk exynos5_clk_sclk_hdmi = {
+ .clk = {
+ .name = "sclk_hdmi",
+ .enable = exynos5_clksrc_mask_disp1_0_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &exynos5_clkset_sclk_hdmi,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 },
+};
+
+static struct clksrc_clk *exynos5_sclk_tv[] = {
+ &exynos5_clk_sclk_pixel,
+ &exynos5_clk_sclk_hdmi,
+};
+
+static struct clk *exynos5_clk_src_mpll_user_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &exynos5_clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_mpll_user = {
+ .sources = exynos5_clk_src_mpll_user_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_mpll_user = {
+ .clk = {
+ .name = "mout_mpll_user",
+ },
+ .sources = &exynos5_clk_src_mpll_user,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_mout_cpu_list[] = {
+ [0] = &exynos5_clk_mout_apll.clk,
+ [1] = &exynos5_clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_mout_cpu = {
+ .sources = exynos5_clkset_mout_cpu_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_mout_cpu_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_cpu = {
+ .clk = {
+ .name = "mout_cpu",
+ },
+ .sources = &exynos5_clkset_mout_cpu,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_armclk = {
+ .clk = {
+ .name = "dout_armclk",
+ .parent = &exynos5_clk_mout_cpu.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_arm2clk = {
+ .clk = {
+ .name = "dout_arm2clk",
+ .parent = &exynos5_clk_dout_armclk.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 },
+};
+
+static struct clk exynos5_clk_armclk = {
+ .name = "armclk",
+ .parent = &exynos5_clk_dout_arm2clk.clk,
+};
+
+/* Core list of CMU_CDREX side */
+
+static struct clk *exynos5_clkset_cdrex_list[] = {
+ [0] = &exynos5_clk_mout_mpll.clk,
+ [1] = &exynos5_clk_mout_bpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_cdrex = {
+ .sources = exynos5_clkset_cdrex_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_cdrex_list),
+};
+
+static struct clksrc_clk exynos5_clk_cdrex = {
+ .clk = {
+ .name = "clk_cdrex",
+ },
+ .sources = &exynos5_clkset_cdrex,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_acp = {
+ .clk = {
+ .name = "aclk_acp",
+ .parent = &exynos5_clk_mout_mpll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_pclk_acp = {
+ .clk = {
+ .name = "pclk_acp",
+ .parent = &exynos5_clk_aclk_acp.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 },
+};
+
+/* Core list of CMU_TOP side */
+
+struct clk *exynos5_clkset_aclk_top_list[] = {
+ [0] = &exynos5_clk_mout_mpll_user.clk,
+ [1] = &exynos5_clk_mout_bpll_user.clk,
+};
+
+struct clksrc_sources exynos5_clkset_aclk = {
+ .sources = exynos5_clkset_aclk_top_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_400 = {
+ .clk = {
+ .name = "aclk_400",
+ },
+ .sources = &exynos5_clkset_aclk,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
+};
+
+struct clk *exynos5_clkset_aclk_333_166_list[] = {
+ [0] = &exynos5_clk_mout_cpll.clk,
+ [1] = &exynos5_clk_mout_mpll_user.clk,
+};
+
+struct clksrc_sources exynos5_clkset_aclk_333_166 = {
+ .sources = exynos5_clkset_aclk_333_166_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_333 = {
+ .clk = {
+ .name = "aclk_333",
+ },
+ .sources = &exynos5_clkset_aclk_333_166,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_166 = {
+ .clk = {
+ .name = "aclk_166",
+ },
+ .sources = &exynos5_clkset_aclk_333_166,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_266 = {
+ .clk = {
+ .name = "aclk_266",
+ .parent = &exynos5_clk_mout_mpll_user.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_200 = {
+ .clk = {
+ .name = "aclk_200",
+ },
+ .sources = &exynos5_clkset_aclk,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_66_pre = {
+ .clk = {
+ .name = "aclk_66_pre",
+ .parent = &exynos5_clk_mout_mpll_user.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_66 = {
+ .clk = {
+ .name = "aclk_66",
+ .parent = &exynos5_clk_aclk_66_pre.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
+};
+
+static struct clk exynos5_init_clocks_off[] = {
+ {
+ .name = "timers",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 24),
+ }, {
+ .name = "rtc",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peris_ctrl,
+ .ctrlbit = (1 << 20),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "dwmci",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "sata",
+ .devname = "ahci",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "sata_phy",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 24),
+ }, {
+ .name = "sata_phy_i2c",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 25),
+ }, {
+ .name = "mfc",
+ .devname = "s5p-mfc",
+ .enable = exynos5_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hdmi",
+ .devname = "exynos4-hdmi",
+ .enable = exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .enable = exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "jpeg",
+ .enable = exynos5_clk_ip_gen_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "dsim0",
+ .enable = exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.1",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 20),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.2",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
+ .name = "pcm",
+ .devname = "samsung-pcm.1",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 22),
+ }, {
+ .name = "pcm",
+ .devname = "samsung-pcm.2",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 23),
+ }, {
+ .name = "spdif",
+ .devname = "samsung-spdif",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 26),
+ }, {
+ .name = "ac97",
+ .devname = "samsung-ac97",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 27),
+ }, {
+ .name = "usbhost",
+ .enable = exynos5_clk_ip_fsys_ctrl ,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "usbotg",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "gps",
+ .enable = exynos5_clk_ip_gps_ctrl,
+ .ctrlbit = ((1 << 3) | (1 << 2) | (1 << 0)),
+ }, {
+ .name = "nfcon",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 22),
+ }, {
+ .name = "iop",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = ((1 << 30) | (1 << 26) | (1 << 23)),
+ }, {
+ .name = "core_iop",
+ .enable = exynos5_clk_ip_core_ctrl,
+ .ctrlbit = ((1 << 21) | (1 << 3)),
+ }, {
+ .name = "mcu_iop",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.0",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.1",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.2",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.3",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.4",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.5",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.6",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.7",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-hdmiphy-i2c",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 14),
+ }
+};
+
+static struct clk exynos5_init_clocks_on[] = {
+ {
+ .name = "uart",
+ .devname = "s5pv210-uart.0",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.1",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.2",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.3",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.4",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.5",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 5),
+ }
+};
+
+static struct clk exynos5_clk_pdma0 = {
+ .name = "dma",
+ .devname = "dma-pl330.0",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 1),
+};
+
+static struct clk exynos5_clk_pdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.1",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 1),
+};
+
+static struct clk exynos5_clk_mdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.2",
+ .enable = exynos5_clk_ip_gen_ctrl,
+ .ctrlbit = (1 << 4),
+};
+
+struct clk *exynos5_clkset_group_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = NULL,
+ [2] = &exynos5_clk_sclk_hdmi24m,
+ [3] = &exynos5_clk_sclk_dptxphy,
+ [4] = &exynos5_clk_sclk_usbphy,
+ [5] = &exynos5_clk_sclk_hdmiphy,
+ [6] = &exynos5_clk_mout_mpll_user.clk,
+ [7] = &exynos5_clk_mout_epll.clk,
+ [8] = &exynos5_clk_sclk_vpll.clk,
+ [9] = &exynos5_clk_mout_cpll.clk,
+};
+
+struct clksrc_sources exynos5_clkset_group = {
+ .sources = exynos5_clkset_group_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list),
+};
+
+/* Possible clock sources for aclk_266_gscl_sub Mux */
+static struct clk *clk_src_gscl_266_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &exynos5_clk_aclk_266.clk,
+};
+
+static struct clksrc_sources clk_src_gscl_266 = {
+ .sources = clk_src_gscl_266_list,
+ .nr_sources = ARRAY_SIZE(clk_src_gscl_266_list),
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc0 = {
+ .clk = {
+ .name = "dout_mmc0",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc1 = {
+ .clk = {
+ .name = "dout_mmc1",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc2 = {
+ .clk = {
+ .name = "dout_mmc2",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc3 = {
+ .clk = {
+ .name = "dout_mmc3",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc4 = {
+ .clk = {
+ .name = "dout_mmc4",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart0 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.0",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart1 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.1",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart2 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.2",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart3 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.3",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &exynos5_clk_dout_mmc0.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &exynos5_clk_dout_mmc1.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &exynos5_clk_dout_mmc2.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &exynos5_clk_dout_mmc3.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_dwmci",
+ .parent = &exynos5_clk_dout_mmc4.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .devname = "s3cfb.1",
+ .enable = exynos5_clksrc_mask_disp1_0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "aclk_266_gscl",
+ },
+ .sources = &clk_src_gscl_266,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 },
+ }, {
+ .clk = {
+ .name = "sclk_g3d",
+ .devname = "mali-t604.0",
+ .enable = exynos5_clk_block_ctrl,
+ .ctrlbit = (1 << 1),
+ },
+ .sources = &exynos5_clkset_aclk,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
+ }, {
+ .clk = {
+ .name = "sclk_gscl_wrap",
+ .devname = "s5p-mipi-csis.0",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_gscl_wrap",
+ .devname = "s5p-mipi-csis.1",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 28),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam0",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam1",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_jpeg",
+ .parent = &exynos5_clk_mout_cpll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 },
+ },
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *exynos5_sysclks[] = {
+ &exynos5_clk_mout_apll,
+ &exynos5_clk_sclk_apll,
+ &exynos5_clk_mout_bpll,
+ &exynos5_clk_mout_bpll_user,
+ &exynos5_clk_mout_cpll,
+ &exynos5_clk_mout_epll,
+ &exynos5_clk_mout_mpll,
+ &exynos5_clk_mout_mpll_user,
+ &exynos5_clk_vpllsrc,
+ &exynos5_clk_sclk_vpll,
+ &exynos5_clk_mout_cpu,
+ &exynos5_clk_dout_armclk,
+ &exynos5_clk_dout_arm2clk,
+ &exynos5_clk_cdrex,
+ &exynos5_clk_aclk_400,
+ &exynos5_clk_aclk_333,
+ &exynos5_clk_aclk_266,
+ &exynos5_clk_aclk_200,
+ &exynos5_clk_aclk_166,
+ &exynos5_clk_aclk_66_pre,
+ &exynos5_clk_aclk_66,
+ &exynos5_clk_dout_mmc0,
+ &exynos5_clk_dout_mmc1,
+ &exynos5_clk_dout_mmc2,
+ &exynos5_clk_dout_mmc3,
+ &exynos5_clk_dout_mmc4,
+ &exynos5_clk_aclk_acp,
+ &exynos5_clk_pclk_acp,
+};
+
+static struct clk *exynos5_clk_cdev[] = {
+ &exynos5_clk_pdma0,
+ &exynos5_clk_pdma1,
+ &exynos5_clk_mdma1,
+};
+
+static struct clksrc_clk *exynos5_clksrc_cdev[] = {
+ &exynos5_clk_sclk_uart0,
+ &exynos5_clk_sclk_uart1,
+ &exynos5_clk_sclk_uart2,
+ &exynos5_clk_sclk_uart3,
+ &exynos5_clk_sclk_mmc0,
+ &exynos5_clk_sclk_mmc1,
+ &exynos5_clk_sclk_mmc2,
+ &exynos5_clk_sclk_mmc3,
+};
+
+static struct clk_lookup exynos5_clk_lookup[] = {
+ CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk),
+ CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
+ CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
+ CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+ CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
+ CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
+};
+
+static unsigned long exynos5_epll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static struct clk *exynos5_clks[] __initdata = {
+ &exynos5_clk_sclk_hdmi27m,
+ &exynos5_clk_sclk_hdmiphy,
+ &clk_fout_bpll,
+ &clk_fout_cpll,
+ &exynos5_clk_armclk,
+};
+
+static u32 epll_div[][6] = {
+ { 192000000, 0, 48, 3, 1, 0 },
+ { 180000000, 0, 45, 3, 1, 0 },
+ { 73728000, 1, 73, 3, 3, 47710 },
+ { 67737600, 1, 90, 4, 3, 20762 },
+ { 49152000, 0, 49, 3, 3, 9961 },
+ { 45158400, 0, 45, 3, 3, 10381 },
+ { 180633600, 0, 45, 3, 1, 10381 },
+};
+
+static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int epll_con, epll_con_k;
+ unsigned int i;
+ unsigned int tmp;
+ unsigned int epll_rate;
+ unsigned int locktime;
+ unsigned int lockcnt;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ if (clk->parent)
+ epll_rate = clk_get_rate(clk->parent);
+ else
+ epll_rate = clk_ext_xtal_mux.rate;
+
+ if (epll_rate != 24000000) {
+ pr_err("Invalid Clock : recommended clock is 24MHz.\n");
+ return -EINVAL;
+ }
+
+ epll_con = __raw_readl(EXYNOS5_EPLL_CON0);
+ epll_con &= ~(0x1 << 27 | \
+ PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
+ PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
+ PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i][0] == rate) {
+ epll_con_k = epll_div[i][5] << 0;
+ epll_con |= epll_div[i][1] << 27;
+ epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT;
+ epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT;
+ epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(epll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ epll_rate /= 1000000;
+
+ /* 3000 max_cycls : specification data */
+ locktime = 3000 / epll_rate * epll_div[i][3];
+ lockcnt = locktime * 10000 / (10000 / epll_rate);
+
+ __raw_writel(lockcnt, EXYNOS5_EPLL_LOCK);
+
+ __raw_writel(epll_con, EXYNOS5_EPLL_CON0);
+ __raw_writel(epll_con_k, EXYNOS5_EPLL_CON1);
+
+ do {
+ tmp = __raw_readl(EXYNOS5_EPLL_CON0);
+ } while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT));
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops exynos5_epll_ops = {
+ .get_rate = exynos5_epll_get_rate,
+ .set_rate = exynos5_epll_set_rate,
+};
+
+static int xtal_rate;
+
+static unsigned long exynos5_fout_apll_get_rate(struct clk *clk)
+{
+ return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0));
+}
+
+static struct clk_ops exynos5_fout_apll_ops = {
+ .get_rate = exynos5_fout_apll_get_rate,
+};
+
+#ifdef CONFIG_PM
+static int exynos5_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
+
+ return 0;
+}
+
+static void exynos5_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
+}
+#else
+#define exynos5_clock_suspend NULL
+#define exynos5_clock_resume NULL
+#endif
+
+struct syscore_ops exynos5_clock_syscore_ops = {
+ .suspend = exynos5_clock_suspend,
+ .resume = exynos5_clock_resume,
+};
+
+void __init_or_cpufreq exynos5_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long apll;
+ unsigned long bpll;
+ unsigned long cpll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned long vpll;
+ unsigned long vpllsrc;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long mout_cdrex;
+ unsigned long aclk_400;
+ unsigned long aclk_333;
+ unsigned long aclk_266;
+ unsigned long aclk_200;
+ unsigned long aclk_166;
+ unsigned long aclk_66;
+ unsigned int ptr;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+
+ xtal_rate = xtal;
+
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0));
+ bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0));
+ cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0));
+ mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0));
+ epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0),
+ __raw_readl(EXYNOS5_EPLL_CON1));
+
+ vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk);
+ vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0),
+ __raw_readl(EXYNOS5_VPLL_CON1));
+
+ clk_fout_apll.ops = &exynos5_fout_apll_ops;
+ clk_fout_bpll.rate = bpll;
+ clk_fout_cpll.rate = cpll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_vpll.rate = vpll;
+
+ printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n"
+ "M=%ld, E=%ld V=%ld",
+ apll, bpll, cpll, mpll, epll, vpll);
+
+ armclk = clk_get_rate(&exynos5_clk_armclk);
+ mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk);
+
+ aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk);
+ aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk);
+ aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk);
+ aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk);
+ aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk);
+ aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk);
+
+ printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n"
+ "ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n"
+ "ACLK166=%ld, ACLK66=%ld\n",
+ armclk, mout_cdrex, aclk_400,
+ aclk_333, aclk_266, aclk_200,
+ aclk_166, aclk_66);
+
+
+ clk_fout_epll.ops = &exynos5_epll_ops;
+
+ if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll))
+ printk(KERN_ERR "Unable to set parent %s of clock %s.\n",
+ clk_fout_epll.name, exynos5_clk_mout_epll.clk.name);
+
+ clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000);
+ clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000);
+
+ clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000);
+ clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++)
+ s3c_set_clksrc(&exynos5_clksrcs[ptr], true);
+}
+
+void __init exynos5_register_clocks(void)
+{
+ int ptr;
+
+ s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++)
+ s3c_register_clksrc(exynos5_sysclks[ptr], 1);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++)
+ s3c_register_clksrc(exynos5_sclk_tv[ptr], 1);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++)
+ s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1);
+
+ s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs));
+ s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on));
+
+ s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++)
+ s3c_disable_clocks(exynos5_clk_cdev[ptr], 1);
+
+ s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
+ s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
+ clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup));
+
+ register_syscore_ops(&exynos5_clock_syscore_ops);
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
index 1e4abd6..e141c1f 100644
--- a/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
@@ -253,6 +253,68 @@
#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0)
#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
+/* For EXYNOS5250 */
+
+#define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100)
+#define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200)
+#define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500)
+#define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100)
+#define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204)
+
+#define EXYNOS5_CLKGATE_IP_CORE EXYNOS_CLKREG(0x04900)
+
+#define EXYNOS5_CLKDIV_ACP EXYNOS_CLKREG(0x08500)
+
+#define EXYNOS5_CLKSRC_TOP2 EXYNOS_CLKREG(0x10218)
+#define EXYNOS5_EPLL_CON0 EXYNOS_CLKREG(0x10130)
+#define EXYNOS5_EPLL_CON1 EXYNOS_CLKREG(0x10134)
+#define EXYNOS5_VPLL_CON0 EXYNOS_CLKREG(0x10140)
+#define EXYNOS5_VPLL_CON1 EXYNOS_CLKREG(0x10144)
+#define EXYNOS5_CPLL_CON0 EXYNOS_CLKREG(0x10120)
+
+#define EXYNOS5_CLKSRC_TOP0 EXYNOS_CLKREG(0x10210)
+#define EXYNOS5_CLKSRC_TOP3 EXYNOS_CLKREG(0x1021C)
+#define EXYNOS5_CLKSRC_GSCL EXYNOS_CLKREG(0x10220)
+#define EXYNOS5_CLKSRC_DISP1_0 EXYNOS_CLKREG(0x1022C)
+#define EXYNOS5_CLKSRC_FSYS EXYNOS_CLKREG(0x10244)
+#define EXYNOS5_CLKSRC_PERIC0 EXYNOS_CLKREG(0x10250)
+
+#define EXYNOS5_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x10310)
+#define EXYNOS5_CLKSRC_MASK_GSCL EXYNOS_CLKREG(0x10320)
+#define EXYNOS5_CLKSRC_MASK_DISP1_0 EXYNOS_CLKREG(0x1032C)
+#define EXYNOS5_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x10340)
+#define EXYNOS5_CLKSRC_MASK_PERIC0 EXYNOS_CLKREG(0x10350)
+
+#define EXYNOS5_CLKDIV_TOP0 EXYNOS_CLKREG(0x10510)
+#define EXYNOS5_CLKDIV_TOP1 EXYNOS_CLKREG(0x10514)
+#define EXYNOS5_CLKDIV_GSCL EXYNOS_CLKREG(0x10520)
+#define EXYNOS5_CLKDIV_DISP1_0 EXYNOS_CLKREG(0x1052C)
+#define EXYNOS5_CLKDIV_GEN EXYNOS_CLKREG(0x1053C)
+#define EXYNOS5_CLKDIV_FSYS0 EXYNOS_CLKREG(0x10548)
+#define EXYNOS5_CLKDIV_FSYS1 EXYNOS_CLKREG(0x1054C)
+#define EXYNOS5_CLKDIV_FSYS2 EXYNOS_CLKREG(0x10550)
+#define EXYNOS5_CLKDIV_FSYS3 EXYNOS_CLKREG(0x10554)
+#define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558)
+
+#define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800)
+#define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920)
+#define EXYNOS5_CLKGATE_IP_DISP1 EXYNOS_CLKREG(0x10928)
+#define EXYNOS5_CLKGATE_IP_MFC EXYNOS_CLKREG(0x1092C)
+#define EXYNOS5_CLKGATE_IP_GEN EXYNOS_CLKREG(0x10934)
+#define EXYNOS5_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x10944)
+#define EXYNOS5_CLKGATE_IP_GPS EXYNOS_CLKREG(0x1094C)
+#define EXYNOS5_CLKGATE_IP_PERIC EXYNOS_CLKREG(0x10950)
+#define EXYNOS5_CLKGATE_IP_PERIS EXYNOS_CLKREG(0x10960)
+#define EXYNOS5_CLKGATE_BLOCK EXYNOS_CLKREG(0x10980)
+
+#define EXYNOS5_BPLL_CON0 EXYNOS_CLKREG(0x20110)
+#define EXYNOS5_CLKSRC_CDREX EXYNOS_CLKREG(0x20200)
+#define EXYNOS5_CLKDIV_CDREX EXYNOS_CLKREG(0x20500)
+
+#define EXYNOS5_EPLL_LOCK EXYNOS_CLKREG(0x10030)
+
+#define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29)
+
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 963edea..f68a9bb 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -61,6 +61,20 @@ struct clk clk_fout_apll = {
.id = -1,
};
+/* BPLL clock output */
+
+struct clk clk_fout_bpll = {
+ .name = "fout_bpll",
+ .id = -1,
+};
+
+/* CPLL clock output */
+
+struct clk clk_fout_cpll = {
+ .name = "fout_cpll",
+ .id = -1,
+};
+
/* MPLL clock output
* No need .ctrlbit, this is always on
*/
@@ -101,6 +115,28 @@ struct clksrc_sources clk_src_apll = {
.nr_sources = ARRAY_SIZE(clk_src_apll_list),
};
+/* Possible clock sources for BPLL Mux */
+static struct clk *clk_src_bpll_list[] = {
+ [0] = &clk_fin_bpll,
+ [1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll = {
+ .sources = clk_src_bpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_bpll_list),
+};
+
+/* Possible clock sources for CPLL Mux */
+static struct clk *clk_src_cpll_list[] = {
+ [0] = &clk_fin_cpll,
+ [1] = &clk_fout_cpll,
+};
+
+struct clksrc_sources clk_src_cpll = {
+ .sources = clk_src_cpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_cpll_list),
+};
+
/* Possible clock sources for MPLL Mux */
static struct clk *clk_src_mpll_list[] = {
[0] = &clk_fin_mpll,
diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h
index 984bf9e..1de4b32 100644
--- a/arch/arm/plat-samsung/include/plat/s5p-clock.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h
@@ -18,6 +18,8 @@
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_bpll clk_ext_xtal_mux
+#define clk_fin_cpll clk_ext_xtal_mux
#define clk_fin_mpll clk_ext_xtal_mux
#define clk_fin_epll clk_ext_xtal_mux
#define clk_fin_dpll clk_ext_xtal_mux
@@ -29,6 +31,8 @@ extern struct clk clk_xusbxti;
extern struct clk clk_48m;
extern struct clk s5p_clk_27m;
extern struct clk clk_fout_apll;
+extern struct clk clk_fout_bpll;
+extern struct clk clk_fout_cpll;
extern struct clk clk_fout_mpll;
extern struct clk clk_fout_epll;
extern struct clk clk_fout_dpll;
@@ -37,6 +41,8 @@ extern struct clk clk_arm;
extern struct clk clk_vpll;
extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_bpll;
+extern struct clksrc_sources clk_src_cpll;
extern struct clksrc_sources clk_src_mpll;
extern struct clksrc_sources clk_src_epll;
extern struct clksrc_sources clk_src_dpll;
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 03/12] ARM: EXYNOS: add clock part for EXYNOS5250 SoC
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds clock-exynos5.c for EXYNOS5250 now
and that can be used for other EXYNOS5 SoCs later.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/clock-exynos5.c | 1247 ++++++++++++++++++++++++
arch/arm/mach-exynos/include/mach/regs-clock.h | 62 ++
arch/arm/plat-s5p/clock.c | 36 +
arch/arm/plat-samsung/include/plat/s5p-clock.h | 6 +
4 files changed, 1351 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-exynos/clock-exynos5.c
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
new file mode 100644
index 0000000..d013982
--- /dev/null
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -0,0 +1,1247 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Clock support for EXYNOS5 SoCs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/syscore_ops.h>
+
+#include <plat/cpu-freq.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/pll.h>
+#include <plat/s5p-clock.h>
+#include <plat/clock-clksrc.h>
+#include <plat/pm.h>
+
+#include <mach/map.h>
+#include <mach/regs-clock.h>
+#include <mach/sysmmu.h>
+
+#include "common.h"
+
+#ifdef CONFIG_PM_SLEEP
+static struct sleep_save exynos5_clock_save[] = {
+ /* will be implemented */
+};
+#endif
+
+static struct clk exynos5_clk_sclk_dptxphy = {
+ .name = "sclk_dptx",
+};
+
+static struct clk exynos5_clk_sclk_hdmi24m = {
+ .name = "sclk_hdmi24m",
+ .rate = 24000000,
+};
+
+static struct clk exynos5_clk_sclk_hdmi27m = {
+ .name = "sclk_hdmi27m",
+ .rate = 27000000,
+};
+
+static struct clk exynos5_clk_sclk_hdmiphy = {
+ .name = "sclk_hdmiphy",
+};
+
+static struct clk exynos5_clk_sclk_usbphy = {
+ .name = "sclk_usbphy",
+ .rate = 48000000,
+};
+
+static int exynos5_clksrc_mask_top_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_TOP, clk, enable);
+}
+
+static int exynos5_clksrc_mask_disp1_0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_DISP1_0, clk, enable);
+}
+
+static int exynos5_clksrc_mask_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_FSYS, clk, enable);
+}
+
+static int exynos5_clksrc_mask_gscl_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_GSCL, clk, enable);
+}
+
+static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable);
+}
+
+static int exynos5_clk_ip_core_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_CORE, clk, enable);
+}
+
+static int exynos5_clk_ip_disp1_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_DISP1, clk, enable);
+}
+
+static int exynos5_clk_ip_fsys_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_FSYS, clk, enable);
+}
+
+static int exynos5_clk_block_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_BLOCK, clk, enable);
+}
+
+static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable);
+}
+
+static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable);
+}
+
+static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable);
+}
+
+static int exynos5_clk_ip_peric_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIC, clk, enable);
+}
+
+static int exynos5_clk_ip_peris_ctrl(struct clk *clk, int enable)
+{
+ return s5p_gatectrl(EXYNOS5_CLKGATE_IP_PERIS, clk, enable);
+}
+
+/* Core list of CMU_CPU side */
+
+static struct clksrc_clk exynos5_clk_mout_apll = {
+ .clk = {
+ .name = "mout_apll",
+ },
+ .sources = &clk_src_apll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 0, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_apll = {
+ .clk = {
+ .name = "sclk_apll",
+ .parent = &exynos5_clk_mout_apll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_bpll = {
+ .clk = {
+ .name = "mout_bpll",
+ },
+ .sources = &clk_src_bpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clk_src_bpll_user_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &exynos5_clk_mout_bpll.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_bpll_user = {
+ .sources = exynos5_clk_src_bpll_user_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clk_src_bpll_user_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_bpll_user = {
+ .clk = {
+ .name = "mout_bpll_user",
+ },
+ .sources = &exynos5_clk_src_bpll_user,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 24, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_cpll = {
+ .clk = {
+ .name = "mout_cpll",
+ },
+ .sources = &clk_src_cpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 8, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_mout_epll = {
+ .clk = {
+ .name = "mout_epll",
+ },
+ .sources = &clk_src_epll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 12, .size = 1 },
+};
+
+struct clksrc_clk exynos5_clk_mout_mpll = {
+ .clk = {
+ .name = "mout_mpll",
+ },
+ .sources = &clk_src_mpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CORE1, .shift = 8, .size = 1 },
+};
+
+static struct clk *exynos_clkset_vpllsrc_list[] = {
+ [0] = &clk_fin_vpll,
+ [1] = &exynos5_clk_sclk_hdmi27m,
+};
+
+static struct clksrc_sources exynos5_clkset_vpllsrc = {
+ .sources = exynos_clkset_vpllsrc_list,
+ .nr_sources = ARRAY_SIZE(exynos_clkset_vpllsrc_list),
+};
+
+static struct clksrc_clk exynos5_clk_vpllsrc = {
+ .clk = {
+ .name = "vpll_src",
+ .enable = exynos5_clksrc_mask_top_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos5_clkset_vpllsrc,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 0, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_sclk_vpll_list[] = {
+ [0] = &exynos5_clk_vpllsrc.clk,
+ [1] = &clk_fout_vpll,
+};
+
+static struct clksrc_sources exynos5_clkset_sclk_vpll = {
+ .sources = exynos5_clkset_sclk_vpll_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_vpll_list),
+};
+
+static struct clksrc_clk exynos5_clk_sclk_vpll = {
+ .clk = {
+ .name = "sclk_vpll",
+ },
+ .sources = &exynos5_clkset_sclk_vpll,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_pixel = {
+ .clk = {
+ .name = "sclk_pixel",
+ .parent = &exynos5_clk_sclk_vpll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 28, .size = 4 },
+};
+
+static struct clk *exynos5_clkset_sclk_hdmi_list[] = {
+ [0] = &exynos5_clk_sclk_pixel.clk,
+ [1] = &exynos5_clk_sclk_hdmiphy,
+};
+
+static struct clksrc_sources exynos5_clkset_sclk_hdmi = {
+ .sources = exynos5_clkset_sclk_hdmi_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_sclk_hdmi_list),
+};
+
+static struct clksrc_clk exynos5_clk_sclk_hdmi = {
+ .clk = {
+ .name = "sclk_hdmi",
+ .enable = exynos5_clksrc_mask_disp1_0_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &exynos5_clkset_sclk_hdmi,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 20, .size = 1 },
+};
+
+static struct clksrc_clk *exynos5_sclk_tv[] = {
+ &exynos5_clk_sclk_pixel,
+ &exynos5_clk_sclk_hdmi,
+};
+
+static struct clk *exynos5_clk_src_mpll_user_list[] = {
+ [0] = &clk_fin_mpll,
+ [1] = &exynos5_clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources exynos5_clk_src_mpll_user = {
+ .sources = exynos5_clk_src_mpll_user_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clk_src_mpll_user_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_mpll_user = {
+ .clk = {
+ .name = "mout_mpll_user",
+ },
+ .sources = &exynos5_clk_src_mpll_user,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP2, .shift = 20, .size = 1 },
+};
+
+static struct clk *exynos5_clkset_mout_cpu_list[] = {
+ [0] = &exynos5_clk_mout_apll.clk,
+ [1] = &exynos5_clk_mout_mpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_mout_cpu = {
+ .sources = exynos5_clkset_mout_cpu_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_mout_cpu_list),
+};
+
+static struct clksrc_clk exynos5_clk_mout_cpu = {
+ .clk = {
+ .name = "mout_cpu",
+ },
+ .sources = &exynos5_clkset_mout_cpu,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CPU, .shift = 16, .size = 1 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_armclk = {
+ .clk = {
+ .name = "dout_armclk",
+ .parent = &exynos5_clk_mout_cpu.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_arm2clk = {
+ .clk = {
+ .name = "dout_arm2clk",
+ .parent = &exynos5_clk_dout_armclk.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CPU0, .shift = 28, .size = 3 },
+};
+
+static struct clk exynos5_clk_armclk = {
+ .name = "armclk",
+ .parent = &exynos5_clk_dout_arm2clk.clk,
+};
+
+/* Core list of CMU_CDREX side */
+
+static struct clk *exynos5_clkset_cdrex_list[] = {
+ [0] = &exynos5_clk_mout_mpll.clk,
+ [1] = &exynos5_clk_mout_bpll.clk,
+};
+
+static struct clksrc_sources exynos5_clkset_cdrex = {
+ .sources = exynos5_clkset_cdrex_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_cdrex_list),
+};
+
+static struct clksrc_clk exynos5_clk_cdrex = {
+ .clk = {
+ .name = "clk_cdrex",
+ },
+ .sources = &exynos5_clkset_cdrex,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_CDREX, .shift = 4, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_CDREX, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_acp = {
+ .clk = {
+ .name = "aclk_acp",
+ .parent = &exynos5_clk_mout_mpll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 0, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_pclk_acp = {
+ .clk = {
+ .name = "pclk_acp",
+ .parent = &exynos5_clk_aclk_acp.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_ACP, .shift = 4, .size = 3 },
+};
+
+/* Core list of CMU_TOP side */
+
+struct clk *exynos5_clkset_aclk_top_list[] = {
+ [0] = &exynos5_clk_mout_mpll_user.clk,
+ [1] = &exynos5_clk_mout_bpll_user.clk,
+};
+
+struct clksrc_sources exynos5_clkset_aclk = {
+ .sources = exynos5_clkset_aclk_top_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_top_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_400 = {
+ .clk = {
+ .name = "aclk_400",
+ },
+ .sources = &exynos5_clkset_aclk,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
+};
+
+struct clk *exynos5_clkset_aclk_333_166_list[] = {
+ [0] = &exynos5_clk_mout_cpll.clk,
+ [1] = &exynos5_clk_mout_mpll_user.clk,
+};
+
+struct clksrc_sources exynos5_clkset_aclk_333_166 = {
+ .sources = exynos5_clkset_aclk_333_166_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_333_166_list),
+};
+
+static struct clksrc_clk exynos5_clk_aclk_333 = {
+ .clk = {
+ .name = "aclk_333",
+ },
+ .sources = &exynos5_clkset_aclk_333_166,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 16, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 20, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_166 = {
+ .clk = {
+ .name = "aclk_166",
+ },
+ .sources = &exynos5_clkset_aclk_333_166,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 8, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 8, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_266 = {
+ .clk = {
+ .name = "aclk_266",
+ .parent = &exynos5_clk_mout_mpll_user.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 16, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_200 = {
+ .clk = {
+ .name = "aclk_200",
+ },
+ .sources = &exynos5_clkset_aclk,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 12, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 12, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_66_pre = {
+ .clk = {
+ .name = "aclk_66_pre",
+ .parent = &exynos5_clk_mout_mpll_user.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP1, .shift = 24, .size = 3 },
+};
+
+static struct clksrc_clk exynos5_clk_aclk_66 = {
+ .clk = {
+ .name = "aclk_66",
+ .parent = &exynos5_clk_aclk_66_pre.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 },
+};
+
+static struct clk exynos5_init_clocks_off[] = {
+ {
+ .name = "timers",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 24),
+ }, {
+ .name = "rtc",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peris_ctrl,
+ .ctrlbit = (1 << 20),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 14),
+ }, {
+ .name = "hsmmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 15),
+ }, {
+ .name = "dwmci",
+ .parent = &exynos5_clk_aclk_200.clk,
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 16),
+ }, {
+ .name = "sata",
+ .devname = "ahci",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "sata_phy",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 24),
+ }, {
+ .name = "sata_phy_i2c",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 25),
+ }, {
+ .name = "mfc",
+ .devname = "s5p-mfc",
+ .enable = exynos5_clk_ip_mfc_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "hdmi",
+ .devname = "exynos4-hdmi",
+ .enable = exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "mixer",
+ .devname = "s5p-mixer",
+ .enable = exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 5),
+ }, {
+ .name = "jpeg",
+ .enable = exynos5_clk_ip_gen_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "dsim0",
+ .enable = exynos5_clk_ip_disp1_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.1",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 20),
+ }, {
+ .name = "iis",
+ .devname = "samsung-i2s.2",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 21),
+ }, {
+ .name = "pcm",
+ .devname = "samsung-pcm.1",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 22),
+ }, {
+ .name = "pcm",
+ .devname = "samsung-pcm.2",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 23),
+ }, {
+ .name = "spdif",
+ .devname = "samsung-spdif",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 26),
+ }, {
+ .name = "ac97",
+ .devname = "samsung-ac97",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 27),
+ }, {
+ .name = "usbhost",
+ .enable = exynos5_clk_ip_fsys_ctrl ,
+ .ctrlbit = (1 << 18),
+ }, {
+ .name = "usbotg",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "gps",
+ .enable = exynos5_clk_ip_gps_ctrl,
+ .ctrlbit = ((1 << 3) | (1 << 2) | (1 << 0)),
+ }, {
+ .name = "nfcon",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 22),
+ }, {
+ .name = "iop",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = ((1 << 30) | (1 << 26) | (1 << 23)),
+ }, {
+ .name = "core_iop",
+ .enable = exynos5_clk_ip_core_ctrl,
+ .ctrlbit = ((1 << 21) | (1 << 3)),
+ }, {
+ .name = "mcu_iop",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.0",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 6),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.1",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 7),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.2",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 8),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.3",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 9),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.4",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 10),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.5",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 11),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.6",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 12),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-i2c.7",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 13),
+ }, {
+ .name = "i2c",
+ .devname = "s3c2440-hdmiphy-i2c",
+ .parent = &exynos5_clk_aclk_66.clk,
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 14),
+ }
+};
+
+static struct clk exynos5_init_clocks_on[] = {
+ {
+ .name = "uart",
+ .devname = "s5pv210-uart.0",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 0),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.1",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 1),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.2",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 2),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.3",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 3),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.4",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 4),
+ }, {
+ .name = "uart",
+ .devname = "s5pv210-uart.5",
+ .enable = exynos5_clk_ip_peric_ctrl,
+ .ctrlbit = (1 << 5),
+ }
+};
+
+static struct clk exynos5_clk_pdma0 = {
+ .name = "dma",
+ .devname = "dma-pl330.0",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 1),
+};
+
+static struct clk exynos5_clk_pdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.1",
+ .enable = exynos5_clk_ip_fsys_ctrl,
+ .ctrlbit = (1 << 1),
+};
+
+static struct clk exynos5_clk_mdma1 = {
+ .name = "dma",
+ .devname = "dma-pl330.2",
+ .enable = exynos5_clk_ip_gen_ctrl,
+ .ctrlbit = (1 << 4),
+};
+
+struct clk *exynos5_clkset_group_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = NULL,
+ [2] = &exynos5_clk_sclk_hdmi24m,
+ [3] = &exynos5_clk_sclk_dptxphy,
+ [4] = &exynos5_clk_sclk_usbphy,
+ [5] = &exynos5_clk_sclk_hdmiphy,
+ [6] = &exynos5_clk_mout_mpll_user.clk,
+ [7] = &exynos5_clk_mout_epll.clk,
+ [8] = &exynos5_clk_sclk_vpll.clk,
+ [9] = &exynos5_clk_mout_cpll.clk,
+};
+
+struct clksrc_sources exynos5_clkset_group = {
+ .sources = exynos5_clkset_group_list,
+ .nr_sources = ARRAY_SIZE(exynos5_clkset_group_list),
+};
+
+/* Possible clock sources for aclk_266_gscl_sub Mux */
+static struct clk *clk_src_gscl_266_list[] = {
+ [0] = &clk_ext_xtal_mux,
+ [1] = &exynos5_clk_aclk_266.clk,
+};
+
+static struct clksrc_sources clk_src_gscl_266 = {
+ .sources = clk_src_gscl_266_list,
+ .nr_sources = ARRAY_SIZE(clk_src_gscl_266_list),
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc0 = {
+ .clk = {
+ .name = "dout_mmc0",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc1 = {
+ .clk = {
+ .name = "dout_mmc1",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc2 = {
+ .clk = {
+ .name = "dout_mmc2",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc3 = {
+ .clk = {
+ .name = "dout_mmc3",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 16, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_dout_mmc4 = {
+ .clk = {
+ .name = "dout_mmc4",
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_FSYS, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart0 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.0",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 0, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart1 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.1",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 4, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 4, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart2 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.2",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 8, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 8, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_uart3 = {
+ .clk = {
+ .name = "uclk1",
+ .devname = "exynos4210-uart.3",
+ .enable = exynos5_clksrc_mask_peric0_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC0, .shift = 12, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC0, .shift = 12, .size = 4 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.0",
+ .parent = &exynos5_clk_dout_mmc0.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.1",
+ .parent = &exynos5_clk_dout_mmc1.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 4),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS1, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.2",
+ .parent = &exynos5_clk_dout_mmc2.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 8),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 8, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
+ .clk = {
+ .name = "sclk_mmc",
+ .devname = "s3c-sdhci.3",
+ .parent = &exynos5_clk_dout_mmc3.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 12),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 },
+};
+
+static struct clksrc_clk exynos5_clksrcs[] = {
+ {
+ .clk = {
+ .name = "sclk_dwmci",
+ .parent = &exynos5_clk_dout_mmc4.clk,
+ .enable = exynos5_clksrc_mask_fsys_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 },
+ }, {
+ .clk = {
+ .name = "sclk_fimd",
+ .devname = "s3cfb.1",
+ .enable = exynos5_clksrc_mask_disp1_0_ctrl,
+ .ctrlbit = (1 << 0),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 },
+ }, {
+ .clk = {
+ .name = "aclk_266_gscl",
+ },
+ .sources = &clk_src_gscl_266,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 8, .size = 1 },
+ }, {
+ .clk = {
+ .name = "sclk_g3d",
+ .devname = "mali-t604.0",
+ .enable = exynos5_clk_block_ctrl,
+ .ctrlbit = (1 << 1),
+ },
+ .sources = &exynos5_clkset_aclk,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 20, .size = 1 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 24, .size = 3 },
+ }, {
+ .clk = {
+ .name = "sclk_gscl_wrap",
+ .devname = "s5p-mipi-csis.0",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 24),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 24, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 24, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_gscl_wrap",
+ .devname = "s5p-mipi-csis.1",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 28),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 28, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 28, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam0",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 16),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 16, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 16, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_cam1",
+ .enable = exynos5_clksrc_mask_gscl_ctrl,
+ .ctrlbit = (1 << 20),
+ },
+ .sources = &exynos5_clkset_group,
+ .reg_src = { .reg = EXYNOS5_CLKSRC_GSCL, .shift = 20, .size = 4 },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GSCL, .shift = 20, .size = 4 },
+ }, {
+ .clk = {
+ .name = "sclk_jpeg",
+ .parent = &exynos5_clk_mout_cpll.clk,
+ },
+ .reg_div = { .reg = EXYNOS5_CLKDIV_GEN, .shift = 4, .size = 3 },
+ },
+};
+
+/* Clock initialization code */
+static struct clksrc_clk *exynos5_sysclks[] = {
+ &exynos5_clk_mout_apll,
+ &exynos5_clk_sclk_apll,
+ &exynos5_clk_mout_bpll,
+ &exynos5_clk_mout_bpll_user,
+ &exynos5_clk_mout_cpll,
+ &exynos5_clk_mout_epll,
+ &exynos5_clk_mout_mpll,
+ &exynos5_clk_mout_mpll_user,
+ &exynos5_clk_vpllsrc,
+ &exynos5_clk_sclk_vpll,
+ &exynos5_clk_mout_cpu,
+ &exynos5_clk_dout_armclk,
+ &exynos5_clk_dout_arm2clk,
+ &exynos5_clk_cdrex,
+ &exynos5_clk_aclk_400,
+ &exynos5_clk_aclk_333,
+ &exynos5_clk_aclk_266,
+ &exynos5_clk_aclk_200,
+ &exynos5_clk_aclk_166,
+ &exynos5_clk_aclk_66_pre,
+ &exynos5_clk_aclk_66,
+ &exynos5_clk_dout_mmc0,
+ &exynos5_clk_dout_mmc1,
+ &exynos5_clk_dout_mmc2,
+ &exynos5_clk_dout_mmc3,
+ &exynos5_clk_dout_mmc4,
+ &exynos5_clk_aclk_acp,
+ &exynos5_clk_pclk_acp,
+};
+
+static struct clk *exynos5_clk_cdev[] = {
+ &exynos5_clk_pdma0,
+ &exynos5_clk_pdma1,
+ &exynos5_clk_mdma1,
+};
+
+static struct clksrc_clk *exynos5_clksrc_cdev[] = {
+ &exynos5_clk_sclk_uart0,
+ &exynos5_clk_sclk_uart1,
+ &exynos5_clk_sclk_uart2,
+ &exynos5_clk_sclk_uart3,
+ &exynos5_clk_sclk_mmc0,
+ &exynos5_clk_sclk_mmc1,
+ &exynos5_clk_sclk_mmc2,
+ &exynos5_clk_sclk_mmc3,
+};
+
+static struct clk_lookup exynos5_clk_lookup[] = {
+ CLKDEV_INIT("exynos4210-uart.0", "clk_uart_baud0", &exynos5_clk_sclk_uart0.clk),
+ CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
+ CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
+ CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
+ CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+ CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+ CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+ CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+ CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
+ CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
+ CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
+};
+
+static unsigned long exynos5_epll_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+
+static struct clk *exynos5_clks[] __initdata = {
+ &exynos5_clk_sclk_hdmi27m,
+ &exynos5_clk_sclk_hdmiphy,
+ &clk_fout_bpll,
+ &clk_fout_cpll,
+ &exynos5_clk_armclk,
+};
+
+static u32 epll_div[][6] = {
+ { 192000000, 0, 48, 3, 1, 0 },
+ { 180000000, 0, 45, 3, 1, 0 },
+ { 73728000, 1, 73, 3, 3, 47710 },
+ { 67737600, 1, 90, 4, 3, 20762 },
+ { 49152000, 0, 49, 3, 3, 9961 },
+ { 45158400, 0, 45, 3, 3, 10381 },
+ { 180633600, 0, 45, 3, 1, 10381 },
+};
+
+static int exynos5_epll_set_rate(struct clk *clk, unsigned long rate)
+{
+ unsigned int epll_con, epll_con_k;
+ unsigned int i;
+ unsigned int tmp;
+ unsigned int epll_rate;
+ unsigned int locktime;
+ unsigned int lockcnt;
+
+ /* Return if nothing changed */
+ if (clk->rate == rate)
+ return 0;
+
+ if (clk->parent)
+ epll_rate = clk_get_rate(clk->parent);
+ else
+ epll_rate = clk_ext_xtal_mux.rate;
+
+ if (epll_rate != 24000000) {
+ pr_err("Invalid Clock : recommended clock is 24MHz.\n");
+ return -EINVAL;
+ }
+
+ epll_con = __raw_readl(EXYNOS5_EPLL_CON0);
+ epll_con &= ~(0x1 << 27 | \
+ PLL46XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \
+ PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \
+ PLL46XX_SDIV_MASK << PLL46XX_SDIV_SHIFT);
+
+ for (i = 0; i < ARRAY_SIZE(epll_div); i++) {
+ if (epll_div[i][0] == rate) {
+ epll_con_k = epll_div[i][5] << 0;
+ epll_con |= epll_div[i][1] << 27;
+ epll_con |= epll_div[i][2] << PLL46XX_MDIV_SHIFT;
+ epll_con |= epll_div[i][3] << PLL46XX_PDIV_SHIFT;
+ epll_con |= epll_div[i][4] << PLL46XX_SDIV_SHIFT;
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(epll_div)) {
+ printk(KERN_ERR "%s: Invalid Clock EPLL Frequency\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ epll_rate /= 1000000;
+
+ /* 3000 max_cycls : specification data */
+ locktime = 3000 / epll_rate * epll_div[i][3];
+ lockcnt = locktime * 10000 / (10000 / epll_rate);
+
+ __raw_writel(lockcnt, EXYNOS5_EPLL_LOCK);
+
+ __raw_writel(epll_con, EXYNOS5_EPLL_CON0);
+ __raw_writel(epll_con_k, EXYNOS5_EPLL_CON1);
+
+ do {
+ tmp = __raw_readl(EXYNOS5_EPLL_CON0);
+ } while (!(tmp & 0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT));
+
+ clk->rate = rate;
+
+ return 0;
+}
+
+static struct clk_ops exynos5_epll_ops = {
+ .get_rate = exynos5_epll_get_rate,
+ .set_rate = exynos5_epll_set_rate,
+};
+
+static int xtal_rate;
+
+static unsigned long exynos5_fout_apll_get_rate(struct clk *clk)
+{
+ return s5p_get_pll35xx(xtal_rate, __raw_readl(EXYNOS5_APLL_CON0));
+}
+
+static struct clk_ops exynos5_fout_apll_ops = {
+ .get_rate = exynos5_fout_apll_get_rate,
+};
+
+#ifdef CONFIG_PM
+static int exynos5_clock_suspend(void)
+{
+ s3c_pm_do_save(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
+
+ return 0;
+}
+
+static void exynos5_clock_resume(void)
+{
+ s3c_pm_do_restore_core(exynos5_clock_save, ARRAY_SIZE(exynos5_clock_save));
+}
+#else
+#define exynos5_clock_suspend NULL
+#define exynos5_clock_resume NULL
+#endif
+
+struct syscore_ops exynos5_clock_syscore_ops = {
+ .suspend = exynos5_clock_suspend,
+ .resume = exynos5_clock_resume,
+};
+
+void __init_or_cpufreq exynos5_setup_clocks(void)
+{
+ struct clk *xtal_clk;
+ unsigned long apll;
+ unsigned long bpll;
+ unsigned long cpll;
+ unsigned long mpll;
+ unsigned long epll;
+ unsigned long vpll;
+ unsigned long vpllsrc;
+ unsigned long xtal;
+ unsigned long armclk;
+ unsigned long mout_cdrex;
+ unsigned long aclk_400;
+ unsigned long aclk_333;
+ unsigned long aclk_266;
+ unsigned long aclk_200;
+ unsigned long aclk_166;
+ unsigned long aclk_66;
+ unsigned int ptr;
+
+ printk(KERN_DEBUG "%s: registering clocks\n", __func__);
+
+ xtal_clk = clk_get(NULL, "xtal");
+ BUG_ON(IS_ERR(xtal_clk));
+
+ xtal = clk_get_rate(xtal_clk);
+
+ xtal_rate = xtal;
+
+ clk_put(xtal_clk);
+
+ printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
+
+ apll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_APLL_CON0));
+ bpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_BPLL_CON0));
+ cpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_CPLL_CON0));
+ mpll = s5p_get_pll35xx(xtal, __raw_readl(EXYNOS5_MPLL_CON0));
+ epll = s5p_get_pll36xx(xtal, __raw_readl(EXYNOS5_EPLL_CON0),
+ __raw_readl(EXYNOS5_EPLL_CON1));
+
+ vpllsrc = clk_get_rate(&exynos5_clk_vpllsrc.clk);
+ vpll = s5p_get_pll36xx(vpllsrc, __raw_readl(EXYNOS5_VPLL_CON0),
+ __raw_readl(EXYNOS5_VPLL_CON1));
+
+ clk_fout_apll.ops = &exynos5_fout_apll_ops;
+ clk_fout_bpll.rate = bpll;
+ clk_fout_cpll.rate = cpll;
+ clk_fout_mpll.rate = mpll;
+ clk_fout_epll.rate = epll;
+ clk_fout_vpll.rate = vpll;
+
+ printk(KERN_INFO "EXYNOS5: PLL settings, A=%ld, B=%ld, C=%ld\n"
+ "M=%ld, E=%ld V=%ld",
+ apll, bpll, cpll, mpll, epll, vpll);
+
+ armclk = clk_get_rate(&exynos5_clk_armclk);
+ mout_cdrex = clk_get_rate(&exynos5_clk_cdrex.clk);
+
+ aclk_400 = clk_get_rate(&exynos5_clk_aclk_400.clk);
+ aclk_333 = clk_get_rate(&exynos5_clk_aclk_333.clk);
+ aclk_266 = clk_get_rate(&exynos5_clk_aclk_266.clk);
+ aclk_200 = clk_get_rate(&exynos5_clk_aclk_200.clk);
+ aclk_166 = clk_get_rate(&exynos5_clk_aclk_166.clk);
+ aclk_66 = clk_get_rate(&exynos5_clk_aclk_66.clk);
+
+ printk(KERN_INFO "EXYNOS5: ARMCLK=%ld, CDREX=%ld, ACLK400=%ld\n"
+ "ACLK333=%ld, ACLK266=%ld, ACLK200=%ld\n"
+ "ACLK166=%ld, ACLK66=%ld\n",
+ armclk, mout_cdrex, aclk_400,
+ aclk_333, aclk_266, aclk_200,
+ aclk_166, aclk_66);
+
+
+ clk_fout_epll.ops = &exynos5_epll_ops;
+
+ if (clk_set_parent(&exynos5_clk_mout_epll.clk, &clk_fout_epll))
+ printk(KERN_ERR "Unable to set parent %s of clock %s.\n",
+ clk_fout_epll.name, exynos5_clk_mout_epll.clk.name);
+
+ clk_set_rate(&exynos5_clk_sclk_apll.clk, 100000000);
+ clk_set_rate(&exynos5_clk_aclk_266.clk, 300000000);
+
+ clk_set_rate(&exynos5_clk_aclk_acp.clk, 267000000);
+ clk_set_rate(&exynos5_clk_pclk_acp.clk, 134000000);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrcs); ptr++)
+ s3c_set_clksrc(&exynos5_clksrcs[ptr], true);
+}
+
+void __init exynos5_register_clocks(void)
+{
+ int ptr;
+
+ s3c24xx_register_clocks(exynos5_clks, ARRAY_SIZE(exynos5_clks));
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sysclks); ptr++)
+ s3c_register_clksrc(exynos5_sysclks[ptr], 1);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_sclk_tv); ptr++)
+ s3c_register_clksrc(exynos5_sclk_tv[ptr], 1);
+
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clksrc_cdev); ptr++)
+ s3c_register_clksrc(exynos5_clksrc_cdev[ptr], 1);
+
+ s3c_register_clksrc(exynos5_clksrcs, ARRAY_SIZE(exynos5_clksrcs));
+ s3c_register_clocks(exynos5_init_clocks_on, ARRAY_SIZE(exynos5_init_clocks_on));
+
+ s3c24xx_register_clocks(exynos5_clk_cdev, ARRAY_SIZE(exynos5_clk_cdev));
+ for (ptr = 0; ptr < ARRAY_SIZE(exynos5_clk_cdev); ptr++)
+ s3c_disable_clocks(exynos5_clk_cdev[ptr], 1);
+
+ s3c_register_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
+ s3c_disable_clocks(exynos5_init_clocks_off, ARRAY_SIZE(exynos5_init_clocks_off));
+ clkdev_add_table(exynos5_clk_lookup, ARRAY_SIZE(exynos5_clk_lookup));
+
+ register_syscore_ops(&exynos5_clock_syscore_ops);
+ s3c_pwmclk_init();
+}
diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h
index 1e4abd6..e141c1f 100644
--- a/arch/arm/mach-exynos/include/mach/regs-clock.h
+++ b/arch/arm/mach-exynos/include/mach/regs-clock.h
@@ -253,6 +253,68 @@
#define EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT (0)
#define EXYNOS4_CLKDIV_CAM1_JPEG_MASK (0xf << EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT)
+/* For EXYNOS5250 */
+
+#define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100)
+#define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200)
+#define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500)
+#define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100)
+#define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204)
+
+#define EXYNOS5_CLKGATE_IP_CORE EXYNOS_CLKREG(0x04900)
+
+#define EXYNOS5_CLKDIV_ACP EXYNOS_CLKREG(0x08500)
+
+#define EXYNOS5_CLKSRC_TOP2 EXYNOS_CLKREG(0x10218)
+#define EXYNOS5_EPLL_CON0 EXYNOS_CLKREG(0x10130)
+#define EXYNOS5_EPLL_CON1 EXYNOS_CLKREG(0x10134)
+#define EXYNOS5_VPLL_CON0 EXYNOS_CLKREG(0x10140)
+#define EXYNOS5_VPLL_CON1 EXYNOS_CLKREG(0x10144)
+#define EXYNOS5_CPLL_CON0 EXYNOS_CLKREG(0x10120)
+
+#define EXYNOS5_CLKSRC_TOP0 EXYNOS_CLKREG(0x10210)
+#define EXYNOS5_CLKSRC_TOP3 EXYNOS_CLKREG(0x1021C)
+#define EXYNOS5_CLKSRC_GSCL EXYNOS_CLKREG(0x10220)
+#define EXYNOS5_CLKSRC_DISP1_0 EXYNOS_CLKREG(0x1022C)
+#define EXYNOS5_CLKSRC_FSYS EXYNOS_CLKREG(0x10244)
+#define EXYNOS5_CLKSRC_PERIC0 EXYNOS_CLKREG(0x10250)
+
+#define EXYNOS5_CLKSRC_MASK_TOP EXYNOS_CLKREG(0x10310)
+#define EXYNOS5_CLKSRC_MASK_GSCL EXYNOS_CLKREG(0x10320)
+#define EXYNOS5_CLKSRC_MASK_DISP1_0 EXYNOS_CLKREG(0x1032C)
+#define EXYNOS5_CLKSRC_MASK_FSYS EXYNOS_CLKREG(0x10340)
+#define EXYNOS5_CLKSRC_MASK_PERIC0 EXYNOS_CLKREG(0x10350)
+
+#define EXYNOS5_CLKDIV_TOP0 EXYNOS_CLKREG(0x10510)
+#define EXYNOS5_CLKDIV_TOP1 EXYNOS_CLKREG(0x10514)
+#define EXYNOS5_CLKDIV_GSCL EXYNOS_CLKREG(0x10520)
+#define EXYNOS5_CLKDIV_DISP1_0 EXYNOS_CLKREG(0x1052C)
+#define EXYNOS5_CLKDIV_GEN EXYNOS_CLKREG(0x1053C)
+#define EXYNOS5_CLKDIV_FSYS0 EXYNOS_CLKREG(0x10548)
+#define EXYNOS5_CLKDIV_FSYS1 EXYNOS_CLKREG(0x1054C)
+#define EXYNOS5_CLKDIV_FSYS2 EXYNOS_CLKREG(0x10550)
+#define EXYNOS5_CLKDIV_FSYS3 EXYNOS_CLKREG(0x10554)
+#define EXYNOS5_CLKDIV_PERIC0 EXYNOS_CLKREG(0x10558)
+
+#define EXYNOS5_CLKGATE_IP_ACP EXYNOS_CLKREG(0x08800)
+#define EXYNOS5_CLKGATE_IP_GSCL EXYNOS_CLKREG(0x10920)
+#define EXYNOS5_CLKGATE_IP_DISP1 EXYNOS_CLKREG(0x10928)
+#define EXYNOS5_CLKGATE_IP_MFC EXYNOS_CLKREG(0x1092C)
+#define EXYNOS5_CLKGATE_IP_GEN EXYNOS_CLKREG(0x10934)
+#define EXYNOS5_CLKGATE_IP_FSYS EXYNOS_CLKREG(0x10944)
+#define EXYNOS5_CLKGATE_IP_GPS EXYNOS_CLKREG(0x1094C)
+#define EXYNOS5_CLKGATE_IP_PERIC EXYNOS_CLKREG(0x10950)
+#define EXYNOS5_CLKGATE_IP_PERIS EXYNOS_CLKREG(0x10960)
+#define EXYNOS5_CLKGATE_BLOCK EXYNOS_CLKREG(0x10980)
+
+#define EXYNOS5_BPLL_CON0 EXYNOS_CLKREG(0x20110)
+#define EXYNOS5_CLKSRC_CDREX EXYNOS_CLKREG(0x20200)
+#define EXYNOS5_CLKDIV_CDREX EXYNOS_CLKREG(0x20500)
+
+#define EXYNOS5_EPLL_LOCK EXYNOS_CLKREG(0x10030)
+
+#define EXYNOS5_EPLLCON0_LOCKED_SHIFT (29)
+
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c
index 963edea..f68a9bb 100644
--- a/arch/arm/plat-s5p/clock.c
+++ b/arch/arm/plat-s5p/clock.c
@@ -61,6 +61,20 @@ struct clk clk_fout_apll = {
.id = -1,
};
+/* BPLL clock output */
+
+struct clk clk_fout_bpll = {
+ .name = "fout_bpll",
+ .id = -1,
+};
+
+/* CPLL clock output */
+
+struct clk clk_fout_cpll = {
+ .name = "fout_cpll",
+ .id = -1,
+};
+
/* MPLL clock output
* No need .ctrlbit, this is always on
*/
@@ -101,6 +115,28 @@ struct clksrc_sources clk_src_apll = {
.nr_sources = ARRAY_SIZE(clk_src_apll_list),
};
+/* Possible clock sources for BPLL Mux */
+static struct clk *clk_src_bpll_list[] = {
+ [0] = &clk_fin_bpll,
+ [1] = &clk_fout_bpll,
+};
+
+struct clksrc_sources clk_src_bpll = {
+ .sources = clk_src_bpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_bpll_list),
+};
+
+/* Possible clock sources for CPLL Mux */
+static struct clk *clk_src_cpll_list[] = {
+ [0] = &clk_fin_cpll,
+ [1] = &clk_fout_cpll,
+};
+
+struct clksrc_sources clk_src_cpll = {
+ .sources = clk_src_cpll_list,
+ .nr_sources = ARRAY_SIZE(clk_src_cpll_list),
+};
+
/* Possible clock sources for MPLL Mux */
static struct clk *clk_src_mpll_list[] = {
[0] = &clk_fin_mpll,
diff --git a/arch/arm/plat-samsung/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h
index 984bf9e..1de4b32 100644
--- a/arch/arm/plat-samsung/include/plat/s5p-clock.h
+++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h
@@ -18,6 +18,8 @@
#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
#define clk_fin_apll clk_ext_xtal_mux
+#define clk_fin_bpll clk_ext_xtal_mux
+#define clk_fin_cpll clk_ext_xtal_mux
#define clk_fin_mpll clk_ext_xtal_mux
#define clk_fin_epll clk_ext_xtal_mux
#define clk_fin_dpll clk_ext_xtal_mux
@@ -29,6 +31,8 @@ extern struct clk clk_xusbxti;
extern struct clk clk_48m;
extern struct clk s5p_clk_27m;
extern struct clk clk_fout_apll;
+extern struct clk clk_fout_bpll;
+extern struct clk clk_fout_cpll;
extern struct clk clk_fout_mpll;
extern struct clk clk_fout_epll;
extern struct clk clk_fout_dpll;
@@ -37,6 +41,8 @@ extern struct clk clk_arm;
extern struct clk clk_vpll;
extern struct clksrc_sources clk_src_apll;
+extern struct clksrc_sources clk_src_bpll;
+extern struct clksrc_sources clk_src_cpll;
extern struct clksrc_sources clk_src_mpll;
extern struct clksrc_sources clk_src_epll;
extern struct clksrc_sources clk_src_dpll;
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v4 04/12] ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: arnd, olof, Kukjin Kim
In all of Samsung platform, the setup-i2c0.c file for I2C channel 0
is always compiled. So when supporting new SoC,it should be updated
for it. Since EXYNOS5 GPIO will be supported after this, there is no
setup gpio in there now. It will be implemented with that, of course.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/Makefile | 2 +-
arch/arm/mach-exynos/setup-i2c0.c | 9 ++++++---
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 995e7cc..2117f02 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -52,7 +52,7 @@ obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
-obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o
+obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c
index d395bd1..b90d94c 100644
--- a/arch/arm/mach-exynos/setup-i2c0.c
+++ b/arch/arm/mach-exynos/setup-i2c0.c
@@ -1,7 +1,5 @@
/*
- * linux/arch/arm/mach-exynos4/setup-i2c0.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* I2C0 GPIO configuration.
@@ -18,9 +16,14 @@ struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
+#include <plat/cpu.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
+ if (soc_is_exynos5250())
+ /* will be implemented with gpio function */
+ return;
+
s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 04/12] ARM: EXYNOS: add initial setup-i2c0 for EXYNOS5
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
In all of Samsung platform, the setup-i2c0.c file for I2C channel 0
is always compiled. So when supporting new SoC,it should be updated
for it. Since EXYNOS5 GPIO will be supported after this, there is no
setup gpio in there now. It will be implemented with that, of course.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/Makefile | 2 +-
arch/arm/mach-exynos/setup-i2c0.c | 9 ++++++---
2 files changed, 7 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 995e7cc..2117f02 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -52,7 +52,7 @@ obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o
obj-$(CONFIG_EXYNOS4_DEV_DMA) += dma.o
obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
-obj-$(CONFIG_ARCH_EXYNOS4) += setup-i2c0.o
+obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c
index d395bd1..b90d94c 100644
--- a/arch/arm/mach-exynos/setup-i2c0.c
+++ b/arch/arm/mach-exynos/setup-i2c0.c
@@ -1,7 +1,5 @@
/*
- * linux/arch/arm/mach-exynos4/setup-i2c0.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2009-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* I2C0 GPIO configuration.
@@ -18,9 +16,14 @@ struct platform_device; /* don't need the contents */
#include <linux/gpio.h>
#include <plat/iic.h>
#include <plat/gpio-cfg.h>
+#include <plat/cpu.h>
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
+ if (soc_is_exynos5250())
+ /* will be implemented with gpio function */
+ return;
+
s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: arnd, olof, Kukjin Kim
Actually, the base address of uart is different between EXYNOS4
and EXYNOS5 and this patch enables to support uart for EXYNOS4
and EXYNOS5 SoCs at runtime.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/Makefile | 1 +
arch/arm/mach-exynos/common.c | 5 +-
arch/arm/mach-exynos/dev-uart.c | 78 +++++++++++++++++++++++
arch/arm/mach-exynos/include/mach/debug-macro.S | 9 ++-
arch/arm/mach-exynos/include/mach/irqs.h | 12 ++++
arch/arm/mach-exynos/include/mach/map.h | 20 +++---
arch/arm/mach-exynos/include/mach/uncompress.h | 17 ++++--
arch/arm/plat-s5p/Kconfig | 4 +
arch/arm/plat-s5p/Makefile | 3 +-
arch/arm/plat-samsung/include/plat/devs.h | 2 +
arch/arm/plat-samsung/include/plat/uncompress.h | 2 +
11 files changed, 135 insertions(+), 18 deletions(-)
create mode 100644 arch/arm/mach-exynos/dev-uart.c
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 2117f02..f8a3770 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
# device support
+obj-y += dev-uart.o
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 02eed29..4a82cf0 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -477,7 +477,10 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
tcfg->has_fracval = 1;
- s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no);
+ if (soc_is_exynos5250())
+ s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no);
+ else
+ s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
}
static DEFINE_SPINLOCK(eint_lock);
diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c
new file mode 100644
index 0000000..2e85c02
--- /dev/null
+++ b/arch/arm/mach-exynos/dev-uart.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Base EXYNOS UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+#define EXYNOS_UART_RESOURCE(_series, _nr) \
+static struct resource exynos##_series##_uart##_nr##_resource[] = { \
+ [0] = DEFINE_RES_MEM(EXYNOS##_series##_PA_UART##_nr, EXYNOS##_series##_SZ_UART), \
+ [1] = DEFINE_RES_IRQ(EXYNOS##_series##_IRQ_UART##_nr), \
+};
+
+EXYNOS_UART_RESOURCE(4, 0)
+EXYNOS_UART_RESOURCE(4, 1)
+EXYNOS_UART_RESOURCE(4, 2)
+EXYNOS_UART_RESOURCE(4, 3)
+
+struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = {
+ [0] = {
+ .resources = exynos4_uart0_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart0_resource),
+ },
+ [1] = {
+ .resources = exynos4_uart1_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart1_resource),
+ },
+ [2] = {
+ .resources = exynos4_uart2_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart2_resource),
+ },
+ [3] = {
+ .resources = exynos4_uart3_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart3_resource),
+ },
+};
+
+EXYNOS_UART_RESOURCE(5, 0)
+EXYNOS_UART_RESOURCE(5, 1)
+EXYNOS_UART_RESOURCE(5, 2)
+EXYNOS_UART_RESOURCE(5, 3)
+
+struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = {
+ [0] = {
+ .resources = exynos5_uart0_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
+ },
+ [1] = {
+ .resources = exynos5_uart1_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
+ },
+ [2] = {
+ .resources = exynos5_uart2_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart2_resource),
+ },
+ [3] = {
+ .resources = exynos5_uart3_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart3_resource),
+ },
+};
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
index 6cacf16..6c857ff 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
@@ -21,8 +21,13 @@
*/
.macro addruart, rp, rv, tmp
- ldr \rp, = S3C_PA_UART
- ldr \rv, = S3C_VA_UART
+ mov \rp, #0x10000000
+ ldr \rp, [\rp, #0x0]
+ and \rp, \rp, #0xf00000
+ teq \rp, #0x500000 @@ EXYNOS5
+ ldreq \rp, =EXYNOS5_PA_UART
+ movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
+ ldr \rv, =S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 1d401c9..f78070e 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -173,4 +173,16 @@
/* Set the default NR_IRQS */
#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
+#define EXYNOS4_IRQ_UART0 IRQ_SPI(52)
+#define EXYNOS4_IRQ_UART1 IRQ_SPI(53)
+#define EXYNOS4_IRQ_UART2 IRQ_SPI(54)
+#define EXYNOS4_IRQ_UART3 IRQ_SPI(55)
+#define EXYNOS4_IRQ_UART4 IRQ_SPI(56)
+
+#define EXYNOS5_IRQ_UART0 IRQ_SPI(51)
+#define EXYNOS5_IRQ_UART1 IRQ_SPI(52)
+#define EXYNOS5_IRQ_UART2 IRQ_SPI(53)
+#define EXYNOS5_IRQ_UART3 IRQ_SPI(54)
+#define EXYNOS5_IRQ_UART4 IRQ_SPI(55)
+
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 2ad4e9c..ea513c6 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -153,7 +153,6 @@
#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
#define S3C_PA_RTC EXYNOS4_PA_RTC
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
-#define S3C_PA_UART EXYNOS4_PA_UART
#define S3C_PA_SPI0 EXYNOS4_PA_SPI0
#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
@@ -182,15 +181,18 @@
/* Compatibility UART */
-#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define EXYNOS4_PA_UART0 0x13800000
+#define EXYNOS4_PA_UART1 0x13810000
+#define EXYNOS4_PA_UART2 0x13820000
+#define EXYNOS4_PA_UART3 0x13830000
+#define EXYNOS4_SZ_UART SZ_256
-#define S5P_PA_UART(x) (EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-#define S5P_PA_UART4 S5P_PA_UART(4)
+#define EXYNOS5_PA_UART0 0x12C00000
+#define EXYNOS5_PA_UART1 0x12C10000
+#define EXYNOS5_PA_UART2 0x12C20000
+#define EXYNOS5_PA_UART3 0x12C30000
+#define EXYNOS5_SZ_UART SZ_256
-#define S5P_SZ_UART SZ_256
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
index 21d97bc..493f4f3 100644
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ b/arch/arm/mach-exynos/include/mach/uncompress.h
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - uncompress code
+ * EXYNOS - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,12 +12,20 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H __FILE__
+#include <asm/mach-types.h>
+
#include <mach/map.h>
+
+volatile u8 *uart_base;
+
#include <plat/uncompress.h>
static void arch_detect_cpu(void)
{
- /* we do not need to do any cpu detection here at the moment. */
+ if (machine_is_smdk5250())
+ uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
+ else
+ uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
/*
* For preventing FIFO overrun or infinite loop of UART console,
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 8167ce6..10e235cc7 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -40,6 +40,10 @@ config S5P_HRT
help
Use the High Resolution timer support
+config S5P_DEV_UART
+ def_bool y
+ depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
config S5P_PM
bool
help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 30d8c30..4bd8241 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -12,7 +12,6 @@ obj- :=
# Core files
-obj-y += dev-uart.o
obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
@@ -23,5 +22,7 @@ obj-$(CONFIG_S5P_SLEEP) += sleep.o
obj-$(CONFIG_S5P_HRT) += s5p-time.o
# devices
+
+obj-$(CONFIG_S5P_DEV_UART) += dev-uart.o
obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 4214ea0..32cc67e 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -26,6 +26,8 @@ struct s3c24xx_uart_resources {
extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
extern struct s3c24xx_uart_resources s5p_uart_resources[];
+extern struct s3c24xx_uart_resources exynos4_uart_resources[];
+extern struct s3c24xx_uart_resources exynos5_uart_resources[];
extern struct platform_device *s3c24xx_uart_devs[];
extern struct platform_device *s3c24xx_uart_src[];
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index ee48e12..7e068d1 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -37,7 +37,9 @@ static void arch_detect_cpu(void);
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
+#ifdef S3C_PA_UART
#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
+#endif
static __inline__ void
uart_wr(unsigned int reg, unsigned int val)
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
Actually, the base address of uart is different between EXYNOS4
and EXYNOS5 and this patch enables to support uart for EXYNOS4
and EXYNOS5 SoCs at runtime.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/Makefile | 1 +
arch/arm/mach-exynos/common.c | 5 +-
arch/arm/mach-exynos/dev-uart.c | 78 +++++++++++++++++++++++
arch/arm/mach-exynos/include/mach/debug-macro.S | 9 ++-
arch/arm/mach-exynos/include/mach/irqs.h | 12 ++++
arch/arm/mach-exynos/include/mach/map.h | 20 +++---
arch/arm/mach-exynos/include/mach/uncompress.h | 17 ++++--
arch/arm/plat-s5p/Kconfig | 4 +
arch/arm/plat-s5p/Makefile | 3 +-
arch/arm/plat-samsung/include/plat/devs.h | 2 +
arch/arm/plat-samsung/include/plat/uncompress.h | 2 +
11 files changed, 135 insertions(+), 18 deletions(-)
create mode 100644 arch/arm/mach-exynos/dev-uart.c
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 2117f02..f8a3770 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
# device support
+obj-y += dev-uart.o
obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 02eed29..4a82cf0 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -477,7 +477,10 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
tcfg->has_fracval = 1;
- s3c24xx_init_uartdevs("exynos4210-uart", s5p_uart_resources, cfg, no);
+ if (soc_is_exynos5250())
+ s3c24xx_init_uartdevs("exynos4210-uart", exynos5_uart_resources, cfg, no);
+ else
+ s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
}
static DEFINE_SPINLOCK(eint_lock);
diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c
new file mode 100644
index 0000000..2e85c02
--- /dev/null
+++ b/arch/arm/mach-exynos/dev-uart.c
@@ -0,0 +1,78 @@
+/*
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Base EXYNOS UART resource and device definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/devs.h>
+
+#define EXYNOS_UART_RESOURCE(_series, _nr) \
+static struct resource exynos##_series##_uart##_nr##_resource[] = { \
+ [0] = DEFINE_RES_MEM(EXYNOS##_series##_PA_UART##_nr, EXYNOS##_series##_SZ_UART), \
+ [1] = DEFINE_RES_IRQ(EXYNOS##_series##_IRQ_UART##_nr), \
+};
+
+EXYNOS_UART_RESOURCE(4, 0)
+EXYNOS_UART_RESOURCE(4, 1)
+EXYNOS_UART_RESOURCE(4, 2)
+EXYNOS_UART_RESOURCE(4, 3)
+
+struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = {
+ [0] = {
+ .resources = exynos4_uart0_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart0_resource),
+ },
+ [1] = {
+ .resources = exynos4_uart1_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart1_resource),
+ },
+ [2] = {
+ .resources = exynos4_uart2_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart2_resource),
+ },
+ [3] = {
+ .resources = exynos4_uart3_resource,
+ .nr_resources = ARRAY_SIZE(exynos4_uart3_resource),
+ },
+};
+
+EXYNOS_UART_RESOURCE(5, 0)
+EXYNOS_UART_RESOURCE(5, 1)
+EXYNOS_UART_RESOURCE(5, 2)
+EXYNOS_UART_RESOURCE(5, 3)
+
+struct s3c24xx_uart_resources exynos5_uart_resources[] __initdata = {
+ [0] = {
+ .resources = exynos5_uart0_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
+ },
+ [1] = {
+ .resources = exynos5_uart1_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart0_resource),
+ },
+ [2] = {
+ .resources = exynos5_uart2_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart2_resource),
+ },
+ [3] = {
+ .resources = exynos5_uart3_resource,
+ .nr_resources = ARRAY_SIZE(exynos5_uart3_resource),
+ },
+};
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
index 6cacf16..6c857ff 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
@@ -21,8 +21,13 @@
*/
.macro addruart, rp, rv, tmp
- ldr \rp, = S3C_PA_UART
- ldr \rv, = S3C_VA_UART
+ mov \rp, #0x10000000
+ ldr \rp, [\rp, #0x0]
+ and \rp, \rp, #0xf00000
+ teq \rp, #0x500000 @@ EXYNOS5
+ ldreq \rp, =EXYNOS5_PA_UART
+ movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
+ ldr \rv, =S3C_VA_UART
#if CONFIG_DEBUG_S3C_UART != 0
add \rp, \rp, #(0x10000 * CONFIG_DEBUG_S3C_UART)
add \rv, \rv, #(0x10000 * CONFIG_DEBUG_S3C_UART)
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index 1d401c9..f78070e 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -173,4 +173,16 @@
/* Set the default NR_IRQS */
#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
+#define EXYNOS4_IRQ_UART0 IRQ_SPI(52)
+#define EXYNOS4_IRQ_UART1 IRQ_SPI(53)
+#define EXYNOS4_IRQ_UART2 IRQ_SPI(54)
+#define EXYNOS4_IRQ_UART3 IRQ_SPI(55)
+#define EXYNOS4_IRQ_UART4 IRQ_SPI(56)
+
+#define EXYNOS5_IRQ_UART0 IRQ_SPI(51)
+#define EXYNOS5_IRQ_UART1 IRQ_SPI(52)
+#define EXYNOS5_IRQ_UART2 IRQ_SPI(53)
+#define EXYNOS5_IRQ_UART3 IRQ_SPI(54)
+#define EXYNOS5_IRQ_UART4 IRQ_SPI(55)
+
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 2ad4e9c..ea513c6 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -153,7 +153,6 @@
#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
#define S3C_PA_RTC EXYNOS4_PA_RTC
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
-#define S3C_PA_UART EXYNOS4_PA_UART
#define S3C_PA_SPI0 EXYNOS4_PA_SPI0
#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
@@ -182,15 +181,18 @@
/* Compatibility UART */
-#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define EXYNOS4_PA_UART0 0x13800000
+#define EXYNOS4_PA_UART1 0x13810000
+#define EXYNOS4_PA_UART2 0x13820000
+#define EXYNOS4_PA_UART3 0x13830000
+#define EXYNOS4_SZ_UART SZ_256
-#define S5P_PA_UART(x) (EXYNOS4_PA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_PA_UART0 S5P_PA_UART(0)
-#define S5P_PA_UART1 S5P_PA_UART(1)
-#define S5P_PA_UART2 S5P_PA_UART(2)
-#define S5P_PA_UART3 S5P_PA_UART(3)
-#define S5P_PA_UART4 S5P_PA_UART(4)
+#define EXYNOS5_PA_UART0 0x12C00000
+#define EXYNOS5_PA_UART1 0x12C10000
+#define EXYNOS5_PA_UART2 0x12C20000
+#define EXYNOS5_PA_UART3 0x12C30000
+#define EXYNOS5_SZ_UART SZ_256
-#define S5P_SZ_UART SZ_256
+#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
#endif /* __ASM_ARCH_MAP_H */
diff --git a/arch/arm/mach-exynos/include/mach/uncompress.h b/arch/arm/mach-exynos/include/mach/uncompress.h
index 21d97bc..493f4f3 100644
--- a/arch/arm/mach-exynos/include/mach/uncompress.h
+++ b/arch/arm/mach-exynos/include/mach/uncompress.h
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - uncompress code
+ * EXYNOS - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -13,12 +12,20 @@
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H __FILE__
+#include <asm/mach-types.h>
+
#include <mach/map.h>
+
+volatile u8 *uart_base;
+
#include <plat/uncompress.h>
static void arch_detect_cpu(void)
{
- /* we do not need to do any cpu detection here at the moment. */
+ if (machine_is_smdk5250())
+ uart_base = (volatile u8 *)EXYNOS5_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
+ else
+ uart_base = (volatile u8 *)EXYNOS4_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
/*
* For preventing FIFO overrun or infinite loop of UART console,
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 8167ce6..10e235cc7 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -40,6 +40,10 @@ config S5P_HRT
help
Use the High Resolution timer support
+config S5P_DEV_UART
+ def_bool y
+ depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
+
config S5P_PM
bool
help
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 30d8c30..4bd8241 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -12,7 +12,6 @@ obj- :=
# Core files
-obj-y += dev-uart.o
obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
@@ -23,5 +22,7 @@ obj-$(CONFIG_S5P_SLEEP) += sleep.o
obj-$(CONFIG_S5P_HRT) += s5p-time.o
# devices
+
+obj-$(CONFIG_S5P_DEV_UART) += dev-uart.o
obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o
obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o
diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h
index 4214ea0..32cc67e 100644
--- a/arch/arm/plat-samsung/include/plat/devs.h
+++ b/arch/arm/plat-samsung/include/plat/devs.h
@@ -26,6 +26,8 @@ struct s3c24xx_uart_resources {
extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
extern struct s3c24xx_uart_resources s3c64xx_uart_resources[];
extern struct s3c24xx_uart_resources s5p_uart_resources[];
+extern struct s3c24xx_uart_resources exynos4_uart_resources[];
+extern struct s3c24xx_uart_resources exynos5_uart_resources[];
extern struct platform_device *s3c24xx_uart_devs[];
extern struct platform_device *s3c24xx_uart_src[];
diff --git a/arch/arm/plat-samsung/include/plat/uncompress.h b/arch/arm/plat-samsung/include/plat/uncompress.h
index ee48e12..7e068d1 100644
--- a/arch/arm/plat-samsung/include/plat/uncompress.h
+++ b/arch/arm/plat-samsung/include/plat/uncompress.h
@@ -37,7 +37,9 @@ static void arch_detect_cpu(void);
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
+#ifdef S3C_PA_UART
#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
+#endif
static __inline__ void
uart_wr(unsigned int reg, unsigned int val)
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* Re: [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-21 9:13 ` Thomas Abraham
-1 siblings, 0 replies; 46+ messages in thread
From: Thomas Abraham @ 2012-03-21 9:13 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc, arnd, olof
On 14 March 2012 20:12, Kukjin Kim <kgene.kim@samsung.com> wrote:
> Actually, the base address of uart is different between EXYNOS4
> and EXYNOS5 and this patch enables to support uart for EXYNOS4
> and EXYNOS5 SoCs at runtime.
>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
[...]
> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
> index 6cacf16..6c857ff 100644
> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
> @@ -21,8 +21,13 @@
> */
>
> .macro addruart, rp, rv, tmp
> - ldr \rp, = S3C_PA_UART
> - ldr \rv, = S3C_VA_UART
> + mov \rp, #0x10000000
This is physical address of Exynos4/5 CPUID register which cannot be
used here. And virtual address S5P_VA_CPUID also cannot be used here
since this will be called before paging_init when earlyprintk boot
param is used. So, with this change, earlyprintk does not work for
both Exynos4 and Exynos5.
Thanks,
Thomas.
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
@ 2012-03-21 9:13 ` Thomas Abraham
0 siblings, 0 replies; 46+ messages in thread
From: Thomas Abraham @ 2012-03-21 9:13 UTC (permalink / raw)
To: linux-arm-kernel
On 14 March 2012 20:12, Kukjin Kim <kgene.kim@samsung.com> wrote:
> Actually, the base address of uart is different between EXYNOS4
> and EXYNOS5 and this patch enables to support uart for EXYNOS4
> and EXYNOS5 SoCs at runtime.
>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> ---
[...]
> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-exynos/include/mach/debug-macro.S
> index 6cacf16..6c857ff 100644
> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
> @@ -21,8 +21,13 @@
> ? ? ? ? */
>
> ? ? ? ?.macro addruart, rp, rv, tmp
> - ? ? ? ? ? ? ? ldr ? ? \rp, = S3C_PA_UART
> - ? ? ? ? ? ? ? ldr ? ? \rv, = S3C_VA_UART
> + ? ? ? ? ? ? ? mov ? ? \rp, #0x10000000
This is physical address of Exynos4/5 CPUID register which cannot be
used here. And virtual address S5P_VA_CPUID also cannot be used here
since this will be called before paging_init when earlyprintk boot
param is used. So, with this change, earlyprintk does not work for
both Exynos4 and Exynos5.
Thanks,
Thomas.
^ permalink raw reply [flat|nested] 46+ messages in thread
* RE: [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
2012-03-21 9:13 ` Thomas Abraham
@ 2012-03-21 10:45 ` Marek Szyprowski
-1 siblings, 0 replies; 46+ messages in thread
From: Marek Szyprowski @ 2012-03-21 10:45 UTC (permalink / raw)
To: 'Thomas Abraham', 'Kukjin Kim'
Cc: olof, linux-samsung-soc, arnd, linux-arm-kernel
Hello,
On Wednesday, March 21, 2012 10:14 AM Thomas Abraham wrote:
> On 14 March 2012 20:12, Kukjin Kim <kgene.kim@samsung.com> wrote:
> > Actually, the base address of uart is different between EXYNOS4
> > and EXYNOS5 and this patch enables to support uart for EXYNOS4
> > and EXYNOS5 SoCs at runtime.
> >
> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> > ---
>
> [...]
>
> > diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-
> exynos/include/mach/debug-macro.S
> > index 6cacf16..6c857ff 100644
> > --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
> > +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
> > @@ -21,8 +21,13 @@
> > */
> >
> > .macro addruart, rp, rv, tmp
> > - ldr \rp, = S3C_PA_UART
> > - ldr \rv, = S3C_VA_UART
> > + mov \rp, #0x10000000
>
> This is physical address of Exynos4/5 CPUID register which cannot be
> used here. And virtual address S5P_VA_CPUID also cannot be used here
> since this will be called before paging_init when earlyprintk boot
> param is used. So, with this change, earlyprintk does not work for
> both Exynos4 and Exynos5.
I confirm, printascii freeze the system on EXYNOS4 after that patch,
tested on Exynos4210 Nuri board.
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
@ 2012-03-21 10:45 ` Marek Szyprowski
0 siblings, 0 replies; 46+ messages in thread
From: Marek Szyprowski @ 2012-03-21 10:45 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
On Wednesday, March 21, 2012 10:14 AM Thomas Abraham wrote:
> On 14 March 2012 20:12, Kukjin Kim <kgene.kim@samsung.com> wrote:
> > Actually, the base address of uart is different between EXYNOS4
> > and EXYNOS5 and this patch enables to support uart for EXYNOS4
> > and EXYNOS5 SoCs at runtime.
> >
> > Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> > ---
>
> [...]
>
> > diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-
> exynos/include/mach/debug-macro.S
> > index 6cacf16..6c857ff 100644
> > --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
> > +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
> > @@ -21,8 +21,13 @@
> > ? ? ? ? */
> >
> > ? ? ? ?.macro addruart, rp, rv, tmp
> > - ? ? ? ? ? ? ? ldr ? ? \rp, = S3C_PA_UART
> > - ? ? ? ? ? ? ? ldr ? ? \rv, = S3C_VA_UART
> > + ? ? ? ? ? ? ? mov ? ? \rp, #0x10000000
>
> This is physical address of Exynos4/5 CPUID register which cannot be
> used here. And virtual address S5P_VA_CPUID also cannot be used here
> since this will be called before paging_init when earlyprintk boot
> param is used. So, with this change, earlyprintk does not work for
> both Exynos4 and Exynos5.
I confirm, printascii freeze the system on EXYNOS4 after that patch,
tested on Exynos4210 Nuri board.
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
2012-03-21 10:45 ` Marek Szyprowski
@ 2012-03-22 14:08 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-22 14:08 UTC (permalink / raw)
To: Marek Szyprowski
Cc: 'Thomas Abraham', 'Kukjin Kim', olof,
linux-samsung-soc, arnd, linux-arm-kernel
On 03/21/12 03:45, Marek Szyprowski wrote:
> Hello,
>
> On Wednesday, March 21, 2012 10:14 AM Thomas Abraham wrote:
>
>> On 14 March 2012 20:12, Kukjin Kim<kgene.kim@samsung.com> wrote:
>>> Actually, the base address of uart is different between EXYNOS4
>>> and EXYNOS5 and this patch enables to support uart for EXYNOS4
>>> and EXYNOS5 SoCs at runtime.
>>>
>>> Signed-off-by: Kukjin Kim<kgene.kim@samsung.com>
>>> ---
>>
>> [...]
>>
>>> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-
>> exynos/include/mach/debug-macro.S
>>> index 6cacf16..6c857ff 100644
>>> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
>>> @@ -21,8 +21,13 @@
>>> */
>>>
>>> .macro addruart, rp, rv, tmp
>>> - ldr \rp, = S3C_PA_UART
>>> - ldr \rv, = S3C_VA_UART
>>> + mov \rp, #0x10000000
>>
>> This is physical address of Exynos4/5 CPUID register which cannot be
>> used here. And virtual address S5P_VA_CPUID also cannot be used here
>> since this will be called before paging_init when earlyprintk boot
>> param is used. So, with this change, earlyprintk does not work for
>> both Exynos4 and Exynos5.
>
> I confirm, printascii freeze the system on EXYNOS4 after that patch,
> tested on Exynos4210 Nuri board.
>
Hi,
I think, it can be solved with following and if no problems, it will be
fixed during v3.4-rcX.
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
b/arch/arm/mach-exynos/in
index 6c857ff..a865417 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
@@ -21,10 +21,10 @@
*/
.macro addruart, rp, rv, tmp
- mov \rp, #0x10000000
- ldr \rp, [\rp, #0x0]
- and \rp, \rp, #0xf00000
- teq \rp, #0x500000 @@ EXYNOS5
+ mrc p15, 0, \tmp, c0, c0, 0
+ and \tmp, \tmp, #0xf0
+ teq \tmp, #0xf0 @@ A15
+
ldreq \rp, =EXYNOS5_PA_UART
movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
ldr \rv, =S3C_VA_UART
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
@ 2012-03-22 14:08 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-22 14:08 UTC (permalink / raw)
To: linux-arm-kernel
On 03/21/12 03:45, Marek Szyprowski wrote:
> Hello,
>
> On Wednesday, March 21, 2012 10:14 AM Thomas Abraham wrote:
>
>> On 14 March 2012 20:12, Kukjin Kim<kgene.kim@samsung.com> wrote:
>>> Actually, the base address of uart is different between EXYNOS4
>>> and EXYNOS5 and this patch enables to support uart for EXYNOS4
>>> and EXYNOS5 SoCs at runtime.
>>>
>>> Signed-off-by: Kukjin Kim<kgene.kim@samsung.com>
>>> ---
>>
>> [...]
>>
>>> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-
>> exynos/include/mach/debug-macro.S
>>> index 6cacf16..6c857ff 100644
>>> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
>>> @@ -21,8 +21,13 @@
>>> */
>>>
>>> .macro addruart, rp, rv, tmp
>>> - ldr \rp, = S3C_PA_UART
>>> - ldr \rv, = S3C_VA_UART
>>> + mov \rp, #0x10000000
>>
>> This is physical address of Exynos4/5 CPUID register which cannot be
>> used here. And virtual address S5P_VA_CPUID also cannot be used here
>> since this will be called before paging_init when earlyprintk boot
>> param is used. So, with this change, earlyprintk does not work for
>> both Exynos4 and Exynos5.
>
> I confirm, printascii freeze the system on EXYNOS4 after that patch,
> tested on Exynos4210 Nuri board.
>
Hi,
I think, it can be solved with following and if no problems, it will be
fixed during v3.4-rcX.
diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
b/arch/arm/mach-exynos/in
index 6c857ff..a865417 100644
--- a/arch/arm/mach-exynos/include/mach/debug-macro.S
+++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
@@ -21,10 +21,10 @@
*/
.macro addruart, rp, rv, tmp
- mov \rp, #0x10000000
- ldr \rp, [\rp, #0x0]
- and \rp, \rp, #0xf00000
- teq \rp, #0x500000 @@ EXYNOS5
+ mrc p15, 0, \tmp, c0, c0, 0
+ and \tmp, \tmp, #0xf0
+ teq \tmp, #0xf0 @@ A15
+
ldreq \rp, =EXYNOS5_PA_UART
movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
ldr \rv, =S3C_VA_UART
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply related [flat|nested] 46+ messages in thread* RE: [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
2012-03-22 14:08 ` Kukjin Kim
@ 2012-03-22 15:31 ` Marek Szyprowski
-1 siblings, 0 replies; 46+ messages in thread
From: Marek Szyprowski @ 2012-03-22 15:31 UTC (permalink / raw)
To: 'Kukjin Kim'
Cc: 'Thomas Abraham', olof, linux-samsung-soc, arnd,
linux-arm-kernel
Hello,
On Thursday, March 22, 2012 3:08 PM Kukjin Kim wrote:
> On 03/21/12 03:45, Marek Szyprowski wrote:
> > Hello,
> >
> > On Wednesday, March 21, 2012 10:14 AM Thomas Abraham wrote:
> >
> >> On 14 March 2012 20:12, Kukjin Kim<kgene.kim@samsung.com> wrote:
> >>> Actually, the base address of uart is different between EXYNOS4
> >>> and EXYNOS5 and this patch enables to support uart for EXYNOS4
> >>> and EXYNOS5 SoCs at runtime.
> >>>
> >>> Signed-off-by: Kukjin Kim<kgene.kim@samsung.com>
> >>> ---
> >>
> >> [...]
> >>
> >>> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-
> >> exynos/include/mach/debug-macro.S
> >>> index 6cacf16..6c857ff 100644
> >>> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
> >>> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
> >>> @@ -21,8 +21,13 @@
> >>> */
> >>>
> >>> .macro addruart, rp, rv, tmp
> >>> - ldr \rp, = S3C_PA_UART
> >>> - ldr \rv, = S3C_VA_UART
> >>> + mov \rp, #0x10000000
> >>
> >> This is physical address of Exynos4/5 CPUID register which cannot be
> >> used here. And virtual address S5P_VA_CPUID also cannot be used here
> >> since this will be called before paging_init when earlyprintk boot
> >> param is used. So, with this change, earlyprintk does not work for
> >> both Exynos4 and Exynos5.
> >
> > I confirm, printascii freeze the system on EXYNOS4 after that patch,
> > tested on Exynos4210 Nuri board.
> >
> Hi,
>
> I think, it can be solved with following and if no problems, it will be
> fixed during v3.4-rcX.
>
> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
> b/arch/arm/mach-exynos/in
> index 6c857ff..a865417 100644
> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
> @@ -21,10 +21,10 @@
> */
>
> .macro addruart, rp, rv, tmp
> - mov \rp, #0x10000000
> - ldr \rp, [\rp, #0x0]
> - and \rp, \rp, #0xf00000
> - teq \rp, #0x500000 @@ EXYNOS5
> + mrc p15, 0, \tmp, c0, c0, 0
> + and \tmp, \tmp, #0xf0
> + teq \tmp, #0xf0 @@ A15
> +
> ldreq \rp, =EXYNOS5_PA_UART
> movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
> ldr \rv, =S3C_VA_UART
>
The above patch solved the problem on Exynos4.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
@ 2012-03-22 15:31 ` Marek Szyprowski
0 siblings, 0 replies; 46+ messages in thread
From: Marek Szyprowski @ 2012-03-22 15:31 UTC (permalink / raw)
To: linux-arm-kernel
Hello,
On Thursday, March 22, 2012 3:08 PM Kukjin Kim wrote:
> On 03/21/12 03:45, Marek Szyprowski wrote:
> > Hello,
> >
> > On Wednesday, March 21, 2012 10:14 AM Thomas Abraham wrote:
> >
> >> On 14 March 2012 20:12, Kukjin Kim<kgene.kim@samsung.com> wrote:
> >>> Actually, the base address of uart is different between EXYNOS4
> >>> and EXYNOS5 and this patch enables to support uart for EXYNOS4
> >>> and EXYNOS5 SoCs at runtime.
> >>>
> >>> Signed-off-by: Kukjin Kim<kgene.kim@samsung.com>
> >>> ---
> >>
> >> [...]
> >>
> >>> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S b/arch/arm/mach-
> >> exynos/include/mach/debug-macro.S
> >>> index 6cacf16..6c857ff 100644
> >>> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
> >>> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
> >>> @@ -21,8 +21,13 @@
> >>> */
> >>>
> >>> .macro addruart, rp, rv, tmp
> >>> - ldr \rp, = S3C_PA_UART
> >>> - ldr \rv, = S3C_VA_UART
> >>> + mov \rp, #0x10000000
> >>
> >> This is physical address of Exynos4/5 CPUID register which cannot be
> >> used here. And virtual address S5P_VA_CPUID also cannot be used here
> >> since this will be called before paging_init when earlyprintk boot
> >> param is used. So, with this change, earlyprintk does not work for
> >> both Exynos4 and Exynos5.
> >
> > I confirm, printascii freeze the system on EXYNOS4 after that patch,
> > tested on Exynos4210 Nuri board.
> >
> Hi,
>
> I think, it can be solved with following and if no problems, it will be
> fixed during v3.4-rcX.
>
> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
> b/arch/arm/mach-exynos/in
> index 6c857ff..a865417 100644
> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
> @@ -21,10 +21,10 @@
> */
>
> .macro addruart, rp, rv, tmp
> - mov \rp, #0x10000000
> - ldr \rp, [\rp, #0x0]
> - and \rp, \rp, #0xf00000
> - teq \rp, #0x500000 @@ EXYNOS5
> + mrc p15, 0, \tmp, c0, c0, 0
> + and \tmp, \tmp, #0xf0
> + teq \tmp, #0xf0 @@ A15
> +
> ldreq \rp, =EXYNOS5_PA_UART
> movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
> ldr \rv, =S3C_VA_UART
>
The above patch solved the problem on Exynos4.
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Best regards
--
Marek Szyprowski
Samsung Poland R&D Center
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
2012-03-22 14:08 ` Kukjin Kim
@ 2012-03-26 14:12 ` Thomas Abraham
-1 siblings, 0 replies; 46+ messages in thread
From: Thomas Abraham @ 2012-03-26 14:12 UTC (permalink / raw)
To: Kukjin Kim
Cc: Marek Szyprowski, olof, linux-samsung-soc, arnd, linux-arm-kernel
2012/3/22 Kukjin Kim <kgene.kim@samsung.com>:
> On 03/21/12 03:45, Marek Szyprowski wrote:
>>
>> Hello,
>>
>> On Wednesday, March 21, 2012 10:14 AM Thomas Abraham wrote:
>>
>>> On 14 March 2012 20:12, Kukjin Kim<kgene.kim@samsung.com> wrote:
>>>>
>>>> Actually, the base address of uart is different between EXYNOS4
>>>> and EXYNOS5 and this patch enables to support uart for EXYNOS4
>>>> and EXYNOS5 SoCs at runtime.
>>>>
>>>> Signed-off-by: Kukjin Kim<kgene.kim@samsung.com>
>>>> ---
>>>
>>>
>>> [...]
>>>
>>>> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>> b/arch/arm/mach-
>>>
>>> exynos/include/mach/debug-macro.S
>>>>
>>>> index 6cacf16..6c857ff 100644
>>>> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>> @@ -21,8 +21,13 @@
>>>> */
>>>>
>>>> .macro addruart, rp, rv, tmp
>>>> - ldr \rp, = S3C_PA_UART
>>>> - ldr \rv, = S3C_VA_UART
>>>> + mov \rp, #0x10000000
>>>
>>>
>>> This is physical address of Exynos4/5 CPUID register which cannot be
>>> used here. And virtual address S5P_VA_CPUID also cannot be used here
>>> since this will be called before paging_init when earlyprintk boot
>>> param is used. So, with this change, earlyprintk does not work for
>>> both Exynos4 and Exynos5.
>>
>>
>> I confirm, printascii freeze the system on EXYNOS4 after that patch,
>> tested on Exynos4210 Nuri board.
>>
> Hi,
>
> I think, it can be solved with following and if no problems, it will be
> fixed during v3.4-rcX.
>
> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
> b/arch/arm/mach-exynos/in
> index 6c857ff..a865417 100644
> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
> @@ -21,10 +21,10 @@
>
> */
>
> .macro addruart, rp, rv, tmp
> - mov \rp, #0x10000000
> - ldr \rp, [\rp, #0x0]
> - and \rp, \rp, #0xf00000
> - teq \rp, #0x500000 @@ EXYNOS5
> + mrc p15, 0, \tmp, c0, c0, 0
> + and \tmp, \tmp, #0xf0
> + teq \tmp, #0xf0 @@ A15
> +
> ldreq \rp, =EXYNOS5_PA_UART
>
> movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
> ldr \rv, =S3C_VA_UART
>
Dear Mr. Kim,
I have tested the above patch on Exynos5. Thanks.
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
@ 2012-03-26 14:12 ` Thomas Abraham
0 siblings, 0 replies; 46+ messages in thread
From: Thomas Abraham @ 2012-03-26 14:12 UTC (permalink / raw)
To: linux-arm-kernel
2012/3/22 Kukjin Kim <kgene.kim@samsung.com>:
> On 03/21/12 03:45, Marek Szyprowski wrote:
>>
>> Hello,
>>
>> On Wednesday, March 21, 2012 10:14 AM Thomas Abraham wrote:
>>
>>> On 14 March 2012 20:12, Kukjin Kim<kgene.kim@samsung.com> ?wrote:
>>>>
>>>> Actually, the base address of uart is different between EXYNOS4
>>>> and EXYNOS5 and this patch enables to support uart for EXYNOS4
>>>> and EXYNOS5 SoCs at runtime.
>>>>
>>>> Signed-off-by: Kukjin Kim<kgene.kim@samsung.com>
>>>> ---
>>>
>>>
>>> [...]
>>>
>>>> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>> b/arch/arm/mach-
>>>
>>> exynos/include/mach/debug-macro.S
>>>>
>>>> index 6cacf16..6c857ff 100644
>>>> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>> @@ -21,8 +21,13 @@
>>>> ? ? ? ? */
>>>>
>>>> ? ? ? ?.macro addruart, rp, rv, tmp
>>>> - ? ? ? ? ? ? ? ldr ? ? \rp, = S3C_PA_UART
>>>> - ? ? ? ? ? ? ? ldr ? ? \rv, = S3C_VA_UART
>>>> + ? ? ? ? ? ? ? mov ? ? \rp, #0x10000000
>>>
>>>
>>> This is physical address of Exynos4/5 CPUID register which cannot be
>>> used here. And virtual address S5P_VA_CPUID also cannot be used here
>>> since this will be called before paging_init when earlyprintk boot
>>> param is used. So, with this change, earlyprintk does not work for
>>> both Exynos4 and Exynos5.
>>
>>
>> I confirm, printascii freeze the system on EXYNOS4 after that patch,
>> tested on Exynos4210 Nuri board.
>>
> Hi,
>
> I think, it can be solved with following and if no problems, it will be
> fixed during v3.4-rcX.
>
> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
> b/arch/arm/mach-exynos/in
> index 6c857ff..a865417 100644
> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
> @@ -21,10 +21,10 @@
>
> ? ? ? ? */
>
> ? ? ? ?.macro addruart, rp, rv, tmp
> - ? ? ? ? ? ? ? mov ? ? \rp, #0x10000000
> - ? ? ? ? ? ? ? ldr ? ? \rp, [\rp, #0x0]
> - ? ? ? ? ? ? ? and ? ? \rp, \rp, #0xf00000
> - ? ? ? ? ? ? ? teq ? ? \rp, #0x500000 ? ? ? ? ?@@ EXYNOS5
> + ? ? ? ? ? ? ? mrc ? ? p15, 0, \tmp, c0, c0, 0
> + ? ? ? ? ? ? ? and ? ? \tmp, \tmp, #0xf0
> + ? ? ? ? ? ? ? teq ? ? \tmp, #0xf0 ? ? ? ? ? ? @@ A15
> +
> ? ? ? ? ? ? ? ?ldreq ? \rp, =EXYNOS5_PA_UART
>
> ? ? ? ? ? ? ? ?movne ? \rp, #EXYNOS4_PA_UART ? @@ EXYNOS4
> ? ? ? ? ? ? ? ?ldr ? ? \rv, =S3C_VA_UART
>
Dear Mr. Kim,
I have tested the above patch on Exynos5. Thanks.
Tested-by: Thomas Abraham <thomas.abraham@linaro.org>
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
2012-03-26 14:12 ` Thomas Abraham
@ 2012-03-29 2:05 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-29 2:05 UTC (permalink / raw)
To: Thomas Abraham
Cc: Kukjin Kim, Marek Szyprowski, olof, linux-samsung-soc, arnd,
linux-arm-kernel
Thomas Abraham wrote:
> 2012/3/22 Kukjin Kim<kgene.kim@samsung.com>:
>> On 03/21/12 03:45, Marek Szyprowski wrote:
>>>
>>> Hello,
>>>
>>> On Wednesday, March 21, 2012 10:14 AM Thomas Abraham wrote:
>>>
>>>> On 14 March 2012 20:12, Kukjin Kim<kgene.kim@samsung.com> wrote:
>>>>>
>>>>> Actually, the base address of uart is different between EXYNOS4
>>>>> and EXYNOS5 and this patch enables to support uart for EXYNOS4
>>>>> and EXYNOS5 SoCs at runtime.
>>>>>
>>>>> Signed-off-by: Kukjin Kim<kgene.kim@samsung.com>
>>>>> ---
>>>>
>>>>
>>>> [...]
>>>>
>>>>> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>>> b/arch/arm/mach-
>>>>
>>>> exynos/include/mach/debug-macro.S
>>>>>
>>>>> index 6cacf16..6c857ff 100644
>>>>> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>>> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>>> @@ -21,8 +21,13 @@
>>>>> */
>>>>>
>>>>> .macro addruart, rp, rv, tmp
>>>>> - ldr \rp, = S3C_PA_UART
>>>>> - ldr \rv, = S3C_VA_UART
>>>>> + mov \rp, #0x10000000
>>>>
>>>>
>>>> This is physical address of Exynos4/5 CPUID register which cannot be
>>>> used here. And virtual address S5P_VA_CPUID also cannot be used here
>>>> since this will be called before paging_init when earlyprintk boot
>>>> param is used. So, with this change, earlyprintk does not work for
>>>> both Exynos4 and Exynos5.
>>>
>>>
>>> I confirm, printascii freeze the system on EXYNOS4 after that patch,
>>> tested on Exynos4210 Nuri board.
>>>
>> Hi,
>>
>> I think, it can be solved with following and if no problems, it will be
>> fixed during v3.4-rcX.
>>
>> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
>> b/arch/arm/mach-exynos/in
>> index 6c857ff..a865417 100644
>> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
>> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
>> @@ -21,10 +21,10 @@
>>
>> */
>>
>> .macro addruart, rp, rv, tmp
>> - mov \rp, #0x10000000
>> - ldr \rp, [\rp, #0x0]
>> - and \rp, \rp, #0xf00000
>> - teq \rp, #0x500000 @@ EXYNOS5
>> + mrc p15, 0, \tmp, c0, c0, 0
>> + and \tmp, \tmp, #0xf0
>> + teq \tmp, #0xf0 @@ A15
>> +
>> ldreq \rp, =EXYNOS5_PA_UART
>>
>> movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
>> ldr \rv, =S3C_VA_UART
>>
>
> Dear Mr. Kim,
>
> I have tested the above patch on Exynos5. Thanks.
>
> Tested-by: Thomas Abraham<thomas.abraham@linaro.org>
Hi Marek, Thomas,
Thanks for your test.
I will apply above patch with your 'Tested-by:...'
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 05/12] ARM: EXYNOS: add support uart for EXYNOS4 and EXYNOS5
@ 2012-03-29 2:05 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-29 2:05 UTC (permalink / raw)
To: linux-arm-kernel
Thomas Abraham wrote:
> 2012/3/22 Kukjin Kim<kgene.kim@samsung.com>:
>> On 03/21/12 03:45, Marek Szyprowski wrote:
>>>
>>> Hello,
>>>
>>> On Wednesday, March 21, 2012 10:14 AM Thomas Abraham wrote:
>>>
>>>> On 14 March 2012 20:12, Kukjin Kim<kgene.kim@samsung.com> wrote:
>>>>>
>>>>> Actually, the base address of uart is different between EXYNOS4
>>>>> and EXYNOS5 and this patch enables to support uart for EXYNOS4
>>>>> and EXYNOS5 SoCs at runtime.
>>>>>
>>>>> Signed-off-by: Kukjin Kim<kgene.kim@samsung.com>
>>>>> ---
>>>>
>>>>
>>>> [...]
>>>>
>>>>> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>>> b/arch/arm/mach-
>>>>
>>>> exynos/include/mach/debug-macro.S
>>>>>
>>>>> index 6cacf16..6c857ff 100644
>>>>> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>>> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
>>>>> @@ -21,8 +21,13 @@
>>>>> */
>>>>>
>>>>> .macro addruart, rp, rv, tmp
>>>>> - ldr \rp, = S3C_PA_UART
>>>>> - ldr \rv, = S3C_VA_UART
>>>>> + mov \rp, #0x10000000
>>>>
>>>>
>>>> This is physical address of Exynos4/5 CPUID register which cannot be
>>>> used here. And virtual address S5P_VA_CPUID also cannot be used here
>>>> since this will be called before paging_init when earlyprintk boot
>>>> param is used. So, with this change, earlyprintk does not work for
>>>> both Exynos4 and Exynos5.
>>>
>>>
>>> I confirm, printascii freeze the system on EXYNOS4 after that patch,
>>> tested on Exynos4210 Nuri board.
>>>
>> Hi,
>>
>> I think, it can be solved with following and if no problems, it will be
>> fixed during v3.4-rcX.
>>
>> diff --git a/arch/arm/mach-exynos/include/mach/debug-macro.S
>> b/arch/arm/mach-exynos/in
>> index 6c857ff..a865417 100644
>> --- a/arch/arm/mach-exynos/include/mach/debug-macro.S
>> +++ b/arch/arm/mach-exynos/include/mach/debug-macro.S
>> @@ -21,10 +21,10 @@
>>
>> */
>>
>> .macro addruart, rp, rv, tmp
>> - mov \rp, #0x10000000
>> - ldr \rp, [\rp, #0x0]
>> - and \rp, \rp, #0xf00000
>> - teq \rp, #0x500000 @@ EXYNOS5
>> + mrc p15, 0, \tmp, c0, c0, 0
>> + and \tmp, \tmp, #0xf0
>> + teq \tmp, #0xf0 @@ A15
>> +
>> ldreq \rp, =EXYNOS5_PA_UART
>>
>> movne \rp, #EXYNOS4_PA_UART @@ EXYNOS4
>> ldr \rv, =S3C_VA_UART
>>
>
> Dear Mr. Kim,
>
> I have tested the above patch on Exynos5. Thanks.
>
> Tested-by: Thomas Abraham<thomas.abraham@linaro.org>
Hi Marek, Thomas,
Thanks for your test.
I will apply above patch with your 'Tested-by:...'
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 06/12] ARM: EXYNOS: add support for EXYNOS5250 SoC
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: arnd, olof, Kukjin Kim
This patch add support for EXYNOS5250 SoC has two Cortex-A15 cores.
Since actually, most codes in mach-exynos/ are used commonly for
EXYNOS4 and EXYNOS5 the EXYNOS5/EXYNOS5250 has been implemented
in mach-exynos/.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/Makefile | 1 +
arch/arm/mach-exynos/common.c | 191 ++++++++++++++++++++++++--
arch/arm/mach-exynos/common.h | 11 ++
arch/arm/mach-exynos/include/mach/map.h | 21 +++-
arch/arm/mach-exynos/include/mach/regs-pmu.h | 1 +
arch/arm/plat-s5p/Kconfig | 4 +-
arch/arm/plat-samsung/include/plat/cpu.h | 10 ++
7 files changed, 223 insertions(+), 16 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 1683bfb..a826ffc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_EXYNOS4) := exynos
+machine-$(CONFIG_ARCH_EXYNOS5) := exynos
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 4a82cf0..7fdb139 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -49,9 +49,12 @@
static const char name_exynos4210[] = "EXYNOS4210";
static const char name_exynos4212[] = "EXYNOS4212";
static const char name_exynos4412[] = "EXYNOS4412";
+static const char name_exynos5250[] = "EXYNOS5250";
static void exynos4_map_io(void);
+static void exynos5_map_io(void);
static void exynos4_init_clocks(int xtal);
+static void exynos5_init_clocks(int xtal);
static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
@@ -80,6 +83,14 @@ static struct cpu_table cpu_ids[] __initdata = {
.init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
+ }, {
+ .idcode = EXYNOS5250_SOC_ID,
+ .idmask = EXYNOS5_SOC_MASK,
+ .map_io = exynos5_map_io,
+ .init_clocks = exynos5_init_clocks,
+ .init_uarts = exynos_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos5250,
},
};
@@ -88,10 +99,14 @@ static struct cpu_table cpu_ids[] __initdata = {
static struct map_desc exynos_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(EXYNOS4_PA_CHIPID),
+ .pfn = __phys_to_pfn(EXYNOS_PA_CHIPID),
.length = SZ_4K,
.type = MT_DEVICE,
- }, {
+ },
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+ {
.virtual = (unsigned long)S3C_VA_SYS,
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON),
.length = SZ_64K,
@@ -141,11 +156,7 @@ static struct map_desc exynos_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS4_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc[] __initdata = {
- {
+ }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -206,11 +217,80 @@ static struct map_desc exynos4_iodesc1[] __initdata = {
},
};
+static struct map_desc exynos5_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_CMU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
+ .length = 144 * SZ_1K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_PMU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_COMBINER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_UART),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+};
+
void exynos4_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
}
+void exynos5_restart(char mode, const char *cmd)
+{
+ __raw_writel(0x1, EXYNOS_SWRESET);
+}
+
/*
* exynos_map_io
*
@@ -261,6 +341,16 @@ static void __init exynos4_map_io(void)
s5p_hdmi_setname("exynos4-hdmi");
}
+static void __init exynos5_map_io(void)
+{
+ iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
+
+ /* The I2C bus controllers are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+ s3c_i2c2_setname("s3c2440-i2c");
+}
+
static void __init exynos4_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -277,6 +367,17 @@ static void __init exynos4_init_clocks(int xtal)
exynos4_setup_clocks();
}
+static void __init exynos5_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+
+ exynos5_register_clocks();
+ exynos5_setup_clocks();
+}
+
#define COMBINER_ENABLE_SET 0x0
#define COMBINER_ENABLE_CLEAR 0x4
#define COMBINER_INT_STATUS 0xC
@@ -420,24 +521,59 @@ void __init exynos4_init_irq(void)
s5p_init_irq(NULL, 0);
}
+void __init exynos5_init_irq(void)
+{
+ int irq;
+
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+
+ for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+ combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+ COMBINER_IRQ(irq, 0));
+ combiner_cascade_irq(irq, IRQ_SPI(irq));
+ }
+
+ /*
+ * The parameters of s5p_init_irq() are for VIC init.
+ * Theses parameters should be NULL and 0 because EXYNOS4
+ * uses GIC instead of VIC.
+ */
+ s5p_init_irq(NULL, 0);
+}
+
struct bus_type exynos4_subsys = {
.name = "exynos4-core",
.dev_name = "exynos4-core",
};
+struct bus_type exynos5_subsys = {
+ .name = "exynos5-core",
+ .dev_name = "exynos5-core",
+};
+
static struct device exynos4_dev = {
.bus = &exynos4_subsys,
};
-static int __init exynos4_core_init(void)
+static struct device exynos5_dev = {
+ .bus = &exynos5_subsys,
+};
+
+static int __init exynos_core_init(void)
{
- return subsys_system_register(&exynos4_subsys, NULL);
+ if (soc_is_exynos5250())
+ return subsys_system_register(&exynos5_subsys, NULL);
+ else
+ return subsys_system_register(&exynos4_subsys, NULL);
}
-core_initcall(exynos4_core_init);
+core_initcall(exynos_core_init);
#ifdef CONFIG_CACHE_L2X0
static int __init exynos4_l2x0_cache_init(void)
{
+ if (soc_is_exynos5250())
+ return 0;
+
/* TAG, Data Latency Control: 2cycle */
__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
@@ -457,14 +593,42 @@ static int __init exynos4_l2x0_cache_init(void)
return 0;
}
-
early_initcall(exynos4_l2x0_cache_init);
#endif
+static int __init exynos5_l2_cache_init(void)
+{
+ unsigned int val;
+
+ if (!soc_is_exynos5250())
+ return 0;
+
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ "bic %0, %0, #(1 << 2)\n" /* cache disable */
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ "mrc p15, 1, %0, c9, c0, 2\n"
+ : "=r"(val));
+
+ val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0);
+
+ asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val));
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ "orr %0, %0, #(1 << 2)\n" /* cache enable */
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ : : "r"(val));
+
+ return 0;
+}
+early_initcall(exynos5_l2_cache_init);
+
static int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
- return device_register(&exynos4_dev);
+
+ if (soc_is_exynos5250())
+ return device_register(&exynos5_dev);
+ else
+ return device_register(&exynos4_dev);
}
/* uart registration process */
@@ -673,6 +837,9 @@ static int __init exynos4_init_irq_eint(void)
{
int irq;
+ if (soc_is_exynos5250())
+ return 0;
+
for (irq = 0 ; irq <= 31 ; irq++) {
irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
handle_level_irq);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index b32c6b5..677b546 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -16,7 +16,9 @@ extern struct sys_timer exynos4_timer;
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos4_init_irq(void);
+void exynos5_init_irq(void);
void exynos4_restart(char mode, const char *cmd);
+void exynos5_restart(char mode, const char *cmd);
#ifdef CONFIG_ARCH_EXYNOS4
void exynos4_register_clocks(void);
@@ -27,6 +29,15 @@ void exynos4_setup_clocks(void);
#define exynos4_setup_clocks()
#endif
+#ifdef CONFIG_ARCH_EXYNOS5
+void exynos5_register_clocks(void);
+void exynos5_setup_clocks(void);
+
+#else
+#define exynos5_register_clocks()
+#define exynos5_setup_clocks()
+#endif
+
#ifdef CONFIG_CPU_EXYNOS4210
void exynos4210_register_clocks(void);
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index ea513c6..bf90bb0 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -25,6 +25,7 @@
#define EXYNOS4_PA_SYSRAM0 0x02025000
#define EXYNOS4_PA_SYSRAM1 0x02020000
+#define EXYNOS5_PA_SYSRAM 0x02020000
#define EXYNOS4_PA_FIMC0 0x11800000
#define EXYNOS4_PA_FIMC1 0x11810000
@@ -44,14 +45,23 @@
#define EXYNOS4_PA_ONENAND 0x0C000000
#define EXYNOS4_PA_ONENAND_DMA 0x0C600000
-#define EXYNOS4_PA_CHIPID 0x10000000
+#define EXYNOS_PA_CHIPID 0x10000000
#define EXYNOS4_PA_SYSCON 0x10010000
+#define EXYNOS5_PA_SYSCON 0x10050100
+
#define EXYNOS4_PA_PMU 0x10020000
+#define EXYNOS5_PA_PMU 0x10040000
+
#define EXYNOS4_PA_CMU 0x10030000
+#define EXYNOS5_PA_CMU 0x10010000
#define EXYNOS4_PA_SYSTIMER 0x10050000
+#define EXYNOS5_PA_SYSTIMER 0x101C0000
+
#define EXYNOS4_PA_WATCHDOG 0x10060000
+#define EXYNOS5_PA_WATCHDOG 0x101D0000
+
#define EXYNOS4_PA_RTC 0x10070000
#define EXYNOS4_PA_KEYPAD 0x100A0000
@@ -59,9 +69,12 @@
#define EXYNOS4_PA_DMC0 0x10400000
#define EXYNOS4_PA_COMBINER 0x10440000
+#define EXYNOS5_PA_COMBINER 0x10440000
#define EXYNOS4_PA_GIC_CPU 0x10480000
#define EXYNOS4_PA_GIC_DIST 0x10490000
+#define EXYNOS5_PA_GIC_CPU 0x10480000
+#define EXYNOS5_PA_GIC_DIST 0x10490000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_TWD 0x10500600
@@ -92,7 +105,6 @@
#define EXYNOS4_PA_SPI1 0x13930000
#define EXYNOS4_PA_SPI2 0x13940000
-
#define EXYNOS4_PA_GPIO1 0x11400000
#define EXYNOS4_PA_GPIO2 0x11000000
#define EXYNOS4_PA_GPIO3 0x03860000
@@ -110,6 +122,7 @@
#define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000
#define EXYNOS4_PA_SROMC 0x12570000
+#define EXYNOS5_PA_SROMC 0x12250000
#define EXYNOS4_PA_EHCI 0x12580000
#define EXYNOS4_PA_OHCI 0x12590000
@@ -117,6 +130,7 @@
#define EXYNOS4_PA_MFC 0x13400000
#define EXYNOS4_PA_UART 0x13800000
+#define EXYNOS5_PA_UART 0x12C00000
#define EXYNOS4_PA_VP 0x12C00000
#define EXYNOS4_PA_MIXER 0x12C10000
@@ -125,6 +139,7 @@
#define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000
#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
+#define EXYNOS5_PA_IIC(x) (0x12C60000 + ((x) * 0x10000))
#define EXYNOS4_PA_ADC 0x13910000
#define EXYNOS4_PA_ADC1 0x13911000
@@ -134,8 +149,10 @@
#define EXYNOS4_PA_SPDIF 0x139B0000
#define EXYNOS4_PA_TIMER 0x139D0000
+#define EXYNOS5_PA_TIMER 0x12DD0000
#define EXYNOS4_PA_SDRAM 0x40000000
+#define EXYNOS5_PA_SDRAM 0x40000000
/* Compatibiltiy Defines */
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 4fff8e9..4c53f38 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -31,6 +31,7 @@
#define S5P_USE_STANDBYWFE_ISP_ARM (1 << 26)
#define S5P_SWRESET S5P_PMUREG(0x0400)
+#define EXYNOS_SWRESET S5P_PMUREG(0x0400)
#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 10e235cc7..88795ea 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -9,8 +9,8 @@ config PLAT_S5P
bool
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
default y
- select ARM_VIC if !ARCH_EXYNOS4
- select ARM_GIC if ARCH_EXYNOS4
+ select ARM_VIC if !ARCH_EXYNOS
+ select ARM_GIC if ARCH_EXYNOS
select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 73cb3cf..787ceac 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -42,6 +42,9 @@ extern unsigned long samsung_cpu_id;
#define EXYNOS4412_CPU_ID 0xE4412200
#define EXYNOS4_CPU_MASK 0xFFFE0000
+#define EXYNOS5250_SOC_ID 0x43520000
+#define EXYNOS5_SOC_MASK 0xFFFFF000
+
#define IS_SAMSUNG_CPU(name, id, mask) \
static inline int is_samsung_##name(void) \
{ \
@@ -58,6 +61,7 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -120,6 +124,12 @@ IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
#define EXYNOS4210_REV_1_0 (0x10)
#define EXYNOS4210_REV_1_1 (0x11)
+#if defined(CONFIG_SOC_EXYNOS5250)
+# define soc_is_exynos5250() is_samsung_exynos5250()
+#else
+# define soc_is_exynos5250() 0
+#endif
+
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 06/12] ARM: EXYNOS: add support for EXYNOS5250 SoC
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
This patch add support for EXYNOS5250 SoC has two Cortex-A15 cores.
Since actually, most codes in mach-exynos/ are used commonly for
EXYNOS4 and EXYNOS5 the EXYNOS5/EXYNOS5250 has been implemented
in mach-exynos/.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/Makefile | 1 +
arch/arm/mach-exynos/common.c | 191 ++++++++++++++++++++++++--
arch/arm/mach-exynos/common.h | 11 ++
arch/arm/mach-exynos/include/mach/map.h | 21 +++-
arch/arm/mach-exynos/include/mach/regs-pmu.h | 1 +
arch/arm/plat-s5p/Kconfig | 4 +-
arch/arm/plat-samsung/include/plat/cpu.h | 10 ++
7 files changed, 223 insertions(+), 16 deletions(-)
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 1683bfb..a826ffc 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -180,6 +180,7 @@ machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_EXYNOS4) := exynos
+machine-$(CONFIG_ARCH_EXYNOS5) := exynos
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 4a82cf0..7fdb139 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -49,9 +49,12 @@
static const char name_exynos4210[] = "EXYNOS4210";
static const char name_exynos4212[] = "EXYNOS4212";
static const char name_exynos4412[] = "EXYNOS4412";
+static const char name_exynos5250[] = "EXYNOS5250";
static void exynos4_map_io(void);
+static void exynos5_map_io(void);
static void exynos4_init_clocks(int xtal);
+static void exynos5_init_clocks(int xtal);
static void exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
@@ -80,6 +83,14 @@ static struct cpu_table cpu_ids[] __initdata = {
.init_uarts = exynos_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
+ }, {
+ .idcode = EXYNOS5250_SOC_ID,
+ .idmask = EXYNOS5_SOC_MASK,
+ .map_io = exynos5_map_io,
+ .init_clocks = exynos5_init_clocks,
+ .init_uarts = exynos_init_uarts,
+ .init = exynos_init,
+ .name = name_exynos5250,
},
};
@@ -88,10 +99,14 @@ static struct cpu_table cpu_ids[] __initdata = {
static struct map_desc exynos_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(EXYNOS4_PA_CHIPID),
+ .pfn = __phys_to_pfn(EXYNOS_PA_CHIPID),
.length = SZ_4K,
.type = MT_DEVICE,
- }, {
+ },
+};
+
+static struct map_desc exynos4_iodesc[] __initdata = {
+ {
.virtual = (unsigned long)S3C_VA_SYS,
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON),
.length = SZ_64K,
@@ -141,11 +156,7 @@ static struct map_desc exynos_iodesc[] __initdata = {
.pfn = __phys_to_pfn(EXYNOS4_PA_UART),
.length = SZ_512K,
.type = MT_DEVICE,
- },
-};
-
-static struct map_desc exynos4_iodesc[] __initdata = {
- {
+ }, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
@@ -206,11 +217,80 @@ static struct map_desc exynos4_iodesc1[] __initdata = {
},
};
+static struct map_desc exynos5_iodesc[] __initdata = {
+ {
+ .virtual = (unsigned long)S3C_VA_SYS,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSCON),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_TIMER,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_TIMER),
+ .length = SZ_16K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_WATCHDOG,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_WATCHDOG),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SROMC,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSTIMER,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSTIMER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_SYSRAM,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_SYSRAM),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_CMU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_CMU),
+ .length = 144 * SZ_1K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_PMU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_PMU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_COMBINER),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S3C_VA_UART,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_UART),
+ .length = SZ_512K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_CPU,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_CPU),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ }, {
+ .virtual = (unsigned long)S5P_VA_GIC_DIST,
+ .pfn = __phys_to_pfn(EXYNOS5_PA_GIC_DIST),
+ .length = SZ_64K,
+ .type = MT_DEVICE,
+ },
+};
+
void exynos4_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
}
+void exynos5_restart(char mode, const char *cmd)
+{
+ __raw_writel(0x1, EXYNOS_SWRESET);
+}
+
/*
* exynos_map_io
*
@@ -261,6 +341,16 @@ static void __init exynos4_map_io(void)
s5p_hdmi_setname("exynos4-hdmi");
}
+static void __init exynos5_map_io(void)
+{
+ iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
+
+ /* The I2C bus controllers are directly compatible with s3c2440 */
+ s3c_i2c0_setname("s3c2440-i2c");
+ s3c_i2c1_setname("s3c2440-i2c");
+ s3c_i2c2_setname("s3c2440-i2c");
+}
+
static void __init exynos4_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
@@ -277,6 +367,17 @@ static void __init exynos4_init_clocks(int xtal)
exynos4_setup_clocks();
}
+static void __init exynos5_init_clocks(int xtal)
+{
+ printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
+
+ s3c24xx_register_baseclocks(xtal);
+ s5p_register_clocks(xtal);
+
+ exynos5_register_clocks();
+ exynos5_setup_clocks();
+}
+
#define COMBINER_ENABLE_SET 0x0
#define COMBINER_ENABLE_CLEAR 0x4
#define COMBINER_INT_STATUS 0xC
@@ -420,24 +521,59 @@ void __init exynos4_init_irq(void)
s5p_init_irq(NULL, 0);
}
+void __init exynos5_init_irq(void)
+{
+ int irq;
+
+ gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+
+ for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+ combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
+ COMBINER_IRQ(irq, 0));
+ combiner_cascade_irq(irq, IRQ_SPI(irq));
+ }
+
+ /*
+ * The parameters of s5p_init_irq() are for VIC init.
+ * Theses parameters should be NULL and 0 because EXYNOS4
+ * uses GIC instead of VIC.
+ */
+ s5p_init_irq(NULL, 0);
+}
+
struct bus_type exynos4_subsys = {
.name = "exynos4-core",
.dev_name = "exynos4-core",
};
+struct bus_type exynos5_subsys = {
+ .name = "exynos5-core",
+ .dev_name = "exynos5-core",
+};
+
static struct device exynos4_dev = {
.bus = &exynos4_subsys,
};
-static int __init exynos4_core_init(void)
+static struct device exynos5_dev = {
+ .bus = &exynos5_subsys,
+};
+
+static int __init exynos_core_init(void)
{
- return subsys_system_register(&exynos4_subsys, NULL);
+ if (soc_is_exynos5250())
+ return subsys_system_register(&exynos5_subsys, NULL);
+ else
+ return subsys_system_register(&exynos4_subsys, NULL);
}
-core_initcall(exynos4_core_init);
+core_initcall(exynos_core_init);
#ifdef CONFIG_CACHE_L2X0
static int __init exynos4_l2x0_cache_init(void)
{
+ if (soc_is_exynos5250())
+ return 0;
+
/* TAG, Data Latency Control: 2cycle */
__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
@@ -457,14 +593,42 @@ static int __init exynos4_l2x0_cache_init(void)
return 0;
}
-
early_initcall(exynos4_l2x0_cache_init);
#endif
+static int __init exynos5_l2_cache_init(void)
+{
+ unsigned int val;
+
+ if (!soc_is_exynos5250())
+ return 0;
+
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ "bic %0, %0, #(1 << 2)\n" /* cache disable */
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ "mrc p15, 1, %0, c9, c0, 2\n"
+ : "=r"(val));
+
+ val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0);
+
+ asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val));
+ asm volatile("mrc p15, 0, %0, c1, c0, 0\n"
+ "orr %0, %0, #(1 << 2)\n" /* cache enable */
+ "mcr p15, 0, %0, c1, c0, 0\n"
+ : : "r"(val));
+
+ return 0;
+}
+early_initcall(exynos5_l2_cache_init);
+
static int __init exynos_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
- return device_register(&exynos4_dev);
+
+ if (soc_is_exynos5250())
+ return device_register(&exynos5_dev);
+ else
+ return device_register(&exynos4_dev);
}
/* uart registration process */
@@ -673,6 +837,9 @@ static int __init exynos4_init_irq_eint(void)
{
int irq;
+ if (soc_is_exynos5250())
+ return 0;
+
for (irq = 0 ; irq <= 31 ; irq++) {
irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
handle_level_irq);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index b32c6b5..677b546 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -16,7 +16,9 @@ extern struct sys_timer exynos4_timer;
void exynos_init_io(struct map_desc *mach_desc, int size);
void exynos4_init_irq(void);
+void exynos5_init_irq(void);
void exynos4_restart(char mode, const char *cmd);
+void exynos5_restart(char mode, const char *cmd);
#ifdef CONFIG_ARCH_EXYNOS4
void exynos4_register_clocks(void);
@@ -27,6 +29,15 @@ void exynos4_setup_clocks(void);
#define exynos4_setup_clocks()
#endif
+#ifdef CONFIG_ARCH_EXYNOS5
+void exynos5_register_clocks(void);
+void exynos5_setup_clocks(void);
+
+#else
+#define exynos5_register_clocks()
+#define exynos5_setup_clocks()
+#endif
+
#ifdef CONFIG_CPU_EXYNOS4210
void exynos4210_register_clocks(void);
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index ea513c6..bf90bb0 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -25,6 +25,7 @@
#define EXYNOS4_PA_SYSRAM0 0x02025000
#define EXYNOS4_PA_SYSRAM1 0x02020000
+#define EXYNOS5_PA_SYSRAM 0x02020000
#define EXYNOS4_PA_FIMC0 0x11800000
#define EXYNOS4_PA_FIMC1 0x11810000
@@ -44,14 +45,23 @@
#define EXYNOS4_PA_ONENAND 0x0C000000
#define EXYNOS4_PA_ONENAND_DMA 0x0C600000
-#define EXYNOS4_PA_CHIPID 0x10000000
+#define EXYNOS_PA_CHIPID 0x10000000
#define EXYNOS4_PA_SYSCON 0x10010000
+#define EXYNOS5_PA_SYSCON 0x10050100
+
#define EXYNOS4_PA_PMU 0x10020000
+#define EXYNOS5_PA_PMU 0x10040000
+
#define EXYNOS4_PA_CMU 0x10030000
+#define EXYNOS5_PA_CMU 0x10010000
#define EXYNOS4_PA_SYSTIMER 0x10050000
+#define EXYNOS5_PA_SYSTIMER 0x101C0000
+
#define EXYNOS4_PA_WATCHDOG 0x10060000
+#define EXYNOS5_PA_WATCHDOG 0x101D0000
+
#define EXYNOS4_PA_RTC 0x10070000
#define EXYNOS4_PA_KEYPAD 0x100A0000
@@ -59,9 +69,12 @@
#define EXYNOS4_PA_DMC0 0x10400000
#define EXYNOS4_PA_COMBINER 0x10440000
+#define EXYNOS5_PA_COMBINER 0x10440000
#define EXYNOS4_PA_GIC_CPU 0x10480000
#define EXYNOS4_PA_GIC_DIST 0x10490000
+#define EXYNOS5_PA_GIC_CPU 0x10480000
+#define EXYNOS5_PA_GIC_DIST 0x10490000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_TWD 0x10500600
@@ -92,7 +105,6 @@
#define EXYNOS4_PA_SPI1 0x13930000
#define EXYNOS4_PA_SPI2 0x13940000
-
#define EXYNOS4_PA_GPIO1 0x11400000
#define EXYNOS4_PA_GPIO2 0x11000000
#define EXYNOS4_PA_GPIO3 0x03860000
@@ -110,6 +122,7 @@
#define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000
#define EXYNOS4_PA_SROMC 0x12570000
+#define EXYNOS5_PA_SROMC 0x12250000
#define EXYNOS4_PA_EHCI 0x12580000
#define EXYNOS4_PA_OHCI 0x12590000
@@ -117,6 +130,7 @@
#define EXYNOS4_PA_MFC 0x13400000
#define EXYNOS4_PA_UART 0x13800000
+#define EXYNOS5_PA_UART 0x12C00000
#define EXYNOS4_PA_VP 0x12C00000
#define EXYNOS4_PA_MIXER 0x12C10000
@@ -125,6 +139,7 @@
#define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000
#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
+#define EXYNOS5_PA_IIC(x) (0x12C60000 + ((x) * 0x10000))
#define EXYNOS4_PA_ADC 0x13910000
#define EXYNOS4_PA_ADC1 0x13911000
@@ -134,8 +149,10 @@
#define EXYNOS4_PA_SPDIF 0x139B0000
#define EXYNOS4_PA_TIMER 0x139D0000
+#define EXYNOS5_PA_TIMER 0x12DD0000
#define EXYNOS4_PA_SDRAM 0x40000000
+#define EXYNOS5_PA_SDRAM 0x40000000
/* Compatibiltiy Defines */
diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h
index 4fff8e9..4c53f38 100644
--- a/arch/arm/mach-exynos/include/mach/regs-pmu.h
+++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h
@@ -31,6 +31,7 @@
#define S5P_USE_STANDBYWFE_ISP_ARM (1 << 26)
#define S5P_SWRESET S5P_PMUREG(0x0400)
+#define EXYNOS_SWRESET S5P_PMUREG(0x0400)
#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index 10e235cc7..88795ea 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -9,8 +9,8 @@ config PLAT_S5P
bool
depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
default y
- select ARM_VIC if !ARCH_EXYNOS4
- select ARM_GIC if ARCH_EXYNOS4
+ select ARM_VIC if !ARCH_EXYNOS
+ select ARM_GIC if ARCH_EXYNOS
select GIC_NON_BANKED if ARCH_EXYNOS4
select NO_IOPORT
select ARCH_REQUIRE_GPIOLIB
diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h
index 73cb3cf..787ceac 100644
--- a/arch/arm/plat-samsung/include/plat/cpu.h
+++ b/arch/arm/plat-samsung/include/plat/cpu.h
@@ -42,6 +42,9 @@ extern unsigned long samsung_cpu_id;
#define EXYNOS4412_CPU_ID 0xE4412200
#define EXYNOS4_CPU_MASK 0xFFFE0000
+#define EXYNOS5250_SOC_ID 0x43520000
+#define EXYNOS5_SOC_MASK 0xFFFFF000
+
#define IS_SAMSUNG_CPU(name, id, mask) \
static inline int is_samsung_##name(void) \
{ \
@@ -58,6 +61,7 @@ IS_SAMSUNG_CPU(s5pv210, S5PV210_CPU_ID, S5PV210_CPU_MASK)
IS_SAMSUNG_CPU(exynos4210, EXYNOS4210_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4212, EXYNOS4212_CPU_ID, EXYNOS4_CPU_MASK)
IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
+IS_SAMSUNG_CPU(exynos5250, EXYNOS5250_SOC_ID, EXYNOS5_SOC_MASK)
#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
defined(CONFIG_CPU_S3C2416) || defined(CONFIG_CPU_S3C2440) || \
@@ -120,6 +124,12 @@ IS_SAMSUNG_CPU(exynos4412, EXYNOS4412_CPU_ID, EXYNOS4_CPU_MASK)
#define EXYNOS4210_REV_1_0 (0x10)
#define EXYNOS4210_REV_1_1 (0x11)
+#if defined(CONFIG_SOC_EXYNOS5250)
+# define soc_is_exynos5250() is_samsung_exynos5250()
+#else
+# define soc_is_exynos5250() 0
+#endif
+
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v4 07/12] ARM: EXYNOS: add interrupt definitions for EXYNOS5250
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: arnd, olof, Kukjin Kim
This patch adds the interrupt definitions for EXYNOS5250 at
<mach/irqs.h> file and it is needed for EXYNOS5250 SoC.
As a note, for single zImage of EXYNOS4 and EXYNOS5, prefix
of EXYNOS4_ and EXYNOS5_ has been added.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/common.c | 101 ++++--
arch/arm/mach-exynos/dev-ahci.c | 4 +-
arch/arm/mach-exynos/dev-audio.c | 4 +-
arch/arm/mach-exynos/dma.c | 6 +-
arch/arm/mach-exynos/include/mach/irqs.h | 587 ++++++++++++++++++++++--------
arch/arm/mach-exynos/mct.c | 23 +-
arch/arm/plat-s5p/irq-pm.c | 25 +-
arch/arm/plat-samsung/irq-vic-timer.c | 16 +
8 files changed, 558 insertions(+), 208 deletions(-)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 7fdb139..4ef0cb5 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -345,6 +345,11 @@ static void __init exynos5_map_io(void)
{
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
+ s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0);
+ s3c_device_i2c0.resource[0].end = EXYNOS5_PA_IIC(0) + SZ_4K - 1;
+ s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
+ s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC;
+
/* The I2C bus controllers are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
@@ -451,7 +456,14 @@ static struct irq_chip combiner_chip = {
static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
{
- if (combiner_nr >= MAX_COMBINER_NR)
+ unsigned int max_nr;
+
+ if (soc_is_exynos5250())
+ max_nr = EXYNOS5_MAX_COMBINER_NR;
+ else
+ max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+ if (combiner_nr >= max_nr)
BUG();
if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
BUG();
@@ -462,8 +474,14 @@ static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start)
{
unsigned int i;
+ unsigned int max_nr;
- if (combiner_nr >= MAX_COMBINER_NR)
+ if (soc_is_exynos5250())
+ max_nr = EXYNOS5_MAX_COMBINER_NR;
+ else
+ max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+ if (combiner_nr >= max_nr)
BUG();
combiner_data[combiner_nr].base = base;
@@ -506,7 +524,7 @@ void __init exynos4_init_irq(void)
of_irq_init(exynos4_dt_irq_match);
#endif
- for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+ for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
@@ -527,7 +545,7 @@ void __init exynos5_init_irq(void)
gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
- for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+ for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
combiner_cascade_irq(irq, IRQ_SPI(irq));
@@ -651,27 +669,43 @@ static DEFINE_SPINLOCK(eint_lock);
static unsigned int eint0_15_data[16];
-static unsigned int exynos4_get_irq_nr(unsigned int number)
-{
- u32 ret = 0;
-
- switch (number) {
- case 0 ... 3:
- ret = (number + IRQ_EINT0);
- break;
- case 4 ... 7:
- ret = (number + (IRQ_EINT4 - 4));
- break;
- case 8 ... 15:
- ret = (number + (IRQ_EINT8 - 8));
- break;
- default:
- printk(KERN_ERR "number available : %d\n", number);
- }
-
- return ret;
-}
+static unsigned int exynos4_eint0_15_src_int[16] = {
+ EXYNOS4_IRQ_EINT0,
+ EXYNOS4_IRQ_EINT1,
+ EXYNOS4_IRQ_EINT2,
+ EXYNOS4_IRQ_EINT3,
+ EXYNOS4_IRQ_EINT4,
+ EXYNOS4_IRQ_EINT5,
+ EXYNOS4_IRQ_EINT6,
+ EXYNOS4_IRQ_EINT7,
+ EXYNOS4_IRQ_EINT8,
+ EXYNOS4_IRQ_EINT9,
+ EXYNOS4_IRQ_EINT10,
+ EXYNOS4_IRQ_EINT11,
+ EXYNOS4_IRQ_EINT12,
+ EXYNOS4_IRQ_EINT13,
+ EXYNOS4_IRQ_EINT14,
+ EXYNOS4_IRQ_EINT15,
+};
+static unsigned int exynos5_eint0_15_src_int[16] = {
+ EXYNOS5_IRQ_EINT0,
+ EXYNOS5_IRQ_EINT1,
+ EXYNOS5_IRQ_EINT2,
+ EXYNOS5_IRQ_EINT3,
+ EXYNOS5_IRQ_EINT4,
+ EXYNOS5_IRQ_EINT5,
+ EXYNOS5_IRQ_EINT6,
+ EXYNOS5_IRQ_EINT7,
+ EXYNOS5_IRQ_EINT8,
+ EXYNOS5_IRQ_EINT9,
+ EXYNOS5_IRQ_EINT10,
+ EXYNOS5_IRQ_EINT11,
+ EXYNOS5_IRQ_EINT12,
+ EXYNOS5_IRQ_EINT13,
+ EXYNOS5_IRQ_EINT14,
+ EXYNOS5_IRQ_EINT15,
+};
static inline void exynos4_irq_eint_mask(struct irq_data *data)
{
u32 mask;
@@ -816,7 +850,7 @@ static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
{
u32 *irq_data = irq_get_handler_data(irq);
struct irq_chip *chip = irq_get_chip(irq);
@@ -846,15 +880,22 @@ static int __init exynos4_init_irq_eint(void)
set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
}
- irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+ irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
for (irq = 0 ; irq <= 15 ; irq++) {
eint0_15_data[irq] = IRQ_EINT(irq);
- irq_set_handler_data(exynos4_get_irq_nr(irq),
- &eint0_15_data[irq]);
- irq_set_chained_handler(exynos4_get_irq_nr(irq),
- exynos4_irq_eint0_15);
+ if (soc_is_exynos5250()) {
+ irq_set_handler_data(exynos5_eint0_15_src_int[irq],
+ &eint0_15_data[irq]);
+ irq_set_chained_handler(exynos5_eint0_15_src_int[irq],
+ exynos_irq_eint0_15);
+ } else {
+ irq_set_handler_data(exynos4_eint0_15_src_int[irq],
+ &eint0_15_data[irq]);
+ irq_set_chained_handler(exynos4_eint0_15_src_int[irq],
+ exynos_irq_eint0_15);
+ }
}
return 0;
diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c
index f57a3de..50ce5b0 100644
--- a/arch/arm/mach-exynos/dev-ahci.c
+++ b/arch/arm/mach-exynos/dev-ahci.c
@@ -242,8 +242,8 @@ static struct resource exynos4_ahci_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_SATA,
- .end = IRQ_SATA,
+ .start = EXYNOS4_IRQ_SATA,
+ .end = EXYNOS4_IRQ_SATA,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index 5a9f9c2e..7199e1a 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -304,8 +304,8 @@ static struct resource exynos4_ac97_resource[] = {
.flags = IORESOURCE_DMA,
},
[4] = {
- .start = IRQ_AC97,
- .end = IRQ_AC97,
+ .start = EXYNOS4_IRQ_AC97,
+ .end = EXYNOS4_IRQ_AC97,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 13607c4..3983abe 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -108,7 +108,7 @@ static u8 exynos4212_pdma0_peri[] = {
struct dma_pl330_platdata exynos4_pdma0_pdata;
static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
- EXYNOS4_PA_PDMA0, {IRQ_PDMA0}, &exynos4_pdma0_pdata);
+ EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata);
static u8 exynos4210_pdma1_peri[] = {
DMACH_PCM0_RX,
@@ -174,7 +174,7 @@ static u8 exynos4212_pdma1_peri[] = {
static struct dma_pl330_platdata exynos4_pdma1_pdata;
static AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330,
- EXYNOS4_PA_PDMA1, {IRQ_PDMA1}, &exynos4_pdma1_pdata);
+ EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata);
static u8 mdma_peri[] = {
DMACH_MTOM_0,
@@ -193,7 +193,7 @@ static struct dma_pl330_platdata exynos4_mdma1_pdata = {
};
static AMBA_AHB_DEVICE(exynos4_mdma1, "dma-pl330.2", 0x00041330,
- EXYNOS4_PA_MDMA1, {IRQ_MDMA1}, &exynos4_mdma1_pdata);
+ EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata);
static int __init exynos4_dma_init(void)
{
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index f78070e..9bee853 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/include/mach/irqs.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - IRQ definitions
+ * EXYNOS - IRQ definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,172 +16,450 @@
/* PPI: Private Peripheral Interrupt */
-#define IRQ_PPI(x) (x+16)
-
-#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
+#define IRQ_PPI(x) (x + 16)
/* SPI: Shared Peripheral Interrupt */
-#define IRQ_SPI(x) (x+32)
-
-#define IRQ_EINT0 IRQ_SPI(16)
-#define IRQ_EINT1 IRQ_SPI(17)
-#define IRQ_EINT2 IRQ_SPI(18)
-#define IRQ_EINT3 IRQ_SPI(19)
-#define IRQ_EINT4 IRQ_SPI(20)
-#define IRQ_EINT5 IRQ_SPI(21)
-#define IRQ_EINT6 IRQ_SPI(22)
-#define IRQ_EINT7 IRQ_SPI(23)
-#define IRQ_EINT8 IRQ_SPI(24)
-#define IRQ_EINT9 IRQ_SPI(25)
-#define IRQ_EINT10 IRQ_SPI(26)
-#define IRQ_EINT11 IRQ_SPI(27)
-#define IRQ_EINT12 IRQ_SPI(28)
-#define IRQ_EINT13 IRQ_SPI(29)
-#define IRQ_EINT14 IRQ_SPI(30)
-#define IRQ_EINT15 IRQ_SPI(31)
-#define IRQ_EINT16_31 IRQ_SPI(32)
-
-#define IRQ_MDMA0 IRQ_SPI(33)
-#define IRQ_MDMA1 IRQ_SPI(34)
-#define IRQ_PDMA0 IRQ_SPI(35)
-#define IRQ_PDMA1 IRQ_SPI(36)
-#define IRQ_TIMER0_VIC IRQ_SPI(37)
-#define IRQ_TIMER1_VIC IRQ_SPI(38)
-#define IRQ_TIMER2_VIC IRQ_SPI(39)
-#define IRQ_TIMER3_VIC IRQ_SPI(40)
-#define IRQ_TIMER4_VIC IRQ_SPI(41)
-#define IRQ_MCT_L0 IRQ_SPI(42)
-#define IRQ_WDT IRQ_SPI(43)
-#define IRQ_RTC_ALARM IRQ_SPI(44)
-#define IRQ_RTC_TIC IRQ_SPI(45)
-#define IRQ_GPIO_XB IRQ_SPI(46)
-#define IRQ_GPIO_XA IRQ_SPI(47)
-#define IRQ_MCT_L1 IRQ_SPI(48)
-
-#define IRQ_UART0 IRQ_SPI(52)
-#define IRQ_UART1 IRQ_SPI(53)
-#define IRQ_UART2 IRQ_SPI(54)
-#define IRQ_UART3 IRQ_SPI(55)
-#define IRQ_UART4 IRQ_SPI(56)
-#define IRQ_MCT_G0 IRQ_SPI(57)
-#define IRQ_IIC IRQ_SPI(58)
-#define IRQ_IIC1 IRQ_SPI(59)
-#define IRQ_IIC2 IRQ_SPI(60)
-#define IRQ_IIC3 IRQ_SPI(61)
-#define IRQ_IIC4 IRQ_SPI(62)
-#define IRQ_IIC5 IRQ_SPI(63)
-#define IRQ_IIC6 IRQ_SPI(64)
-#define IRQ_IIC7 IRQ_SPI(65)
-#define IRQ_SPI0 IRQ_SPI(66)
-#define IRQ_SPI1 IRQ_SPI(67)
-#define IRQ_SPI2 IRQ_SPI(68)
-
-#define IRQ_USB_HOST IRQ_SPI(70)
-#define IRQ_USB_HSOTG IRQ_SPI(71)
-#define IRQ_MODEM_IF IRQ_SPI(72)
-#define IRQ_HSMMC0 IRQ_SPI(73)
-#define IRQ_HSMMC1 IRQ_SPI(74)
-#define IRQ_HSMMC2 IRQ_SPI(75)
-#define IRQ_HSMMC3 IRQ_SPI(76)
-#define IRQ_DWMCI IRQ_SPI(77)
-
-#define IRQ_MIPI_CSIS0 IRQ_SPI(78)
-#define IRQ_MIPI_CSIS1 IRQ_SPI(80)
-
-#define IRQ_ONENAND_AUDI IRQ_SPI(82)
-#define IRQ_ROTATOR IRQ_SPI(83)
-#define IRQ_FIMC0 IRQ_SPI(84)
-#define IRQ_FIMC1 IRQ_SPI(85)
-#define IRQ_FIMC2 IRQ_SPI(86)
-#define IRQ_FIMC3 IRQ_SPI(87)
-#define IRQ_JPEG IRQ_SPI(88)
-#define IRQ_2D IRQ_SPI(89)
-#define IRQ_PCIE IRQ_SPI(90)
-
-#define IRQ_MIXER IRQ_SPI(91)
-#define IRQ_HDMI IRQ_SPI(92)
-#define IRQ_IIC_HDMIPHY IRQ_SPI(93)
-#define IRQ_MFC IRQ_SPI(94)
-#define IRQ_SDO IRQ_SPI(95)
-
-#define IRQ_AUDIO_SS IRQ_SPI(96)
-#define IRQ_I2S0 IRQ_SPI(97)
-#define IRQ_I2S1 IRQ_SPI(98)
-#define IRQ_I2S2 IRQ_SPI(99)
-#define IRQ_AC97 IRQ_SPI(100)
-
-#define IRQ_SPDIF IRQ_SPI(104)
-#define IRQ_ADC0 IRQ_SPI(105)
-#define IRQ_PEN0 IRQ_SPI(106)
-#define IRQ_ADC1 IRQ_SPI(107)
-#define IRQ_PEN1 IRQ_SPI(108)
-#define IRQ_KEYPAD IRQ_SPI(109)
-#define IRQ_PMU IRQ_SPI(110)
-#define IRQ_GPS IRQ_SPI(111)
-#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
-#define IRQ_SLIMBUS IRQ_SPI(113)
-
-#define IRQ_TSI IRQ_SPI(115)
-#define IRQ_SATA IRQ_SPI(116)
-
-#define MAX_IRQ_IN_COMBINER 8
-#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
-#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
-
-#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
-#define IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
-#define IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
-#define IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3)
-#define IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4)
-#define IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5)
-#define IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6)
-#define IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7)
-
-#define IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0)
-#define IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1)
-#define IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2)
-#define IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3)
-#define IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4)
-#define IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5)
-#define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
-#define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
-
-#define IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
-#define IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
-#define IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
-
-#define MAX_COMBINER_NR 16
-
-#define IRQ_ADC IRQ_ADC0
-#define IRQ_TC IRQ_PEN0
-
-#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0)
-
-#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0)
-#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16)
-
-/* optional GPIO interrupts */
-#define S5P_GPIOINT_BASE (S5P_IRQ_EINT_BASE + 32)
-#define IRQ_GPIO1_NR_GROUPS 16
-#define IRQ_GPIO2_NR_GROUPS 9
-#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
-
-#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
+#define IRQ_SPI(x) (x + 32)
-/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
+/* COMBINER */
+
+#define MAX_IRQ_IN_COMBINER 8
+#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
+#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
+
+/* For EXYNOS4 and EXYNOS5 */
+
+#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12)
+
+#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32)
+
+/* For EXYNOS4 SoCs */
+
+#define EXYNOS4_IRQ_EINT0 IRQ_SPI(16)
+#define EXYNOS4_IRQ_EINT1 IRQ_SPI(17)
+#define EXYNOS4_IRQ_EINT2 IRQ_SPI(18)
+#define EXYNOS4_IRQ_EINT3 IRQ_SPI(19)
+#define EXYNOS4_IRQ_EINT4 IRQ_SPI(20)
+#define EXYNOS4_IRQ_EINT5 IRQ_SPI(21)
+#define EXYNOS4_IRQ_EINT6 IRQ_SPI(22)
+#define EXYNOS4_IRQ_EINT7 IRQ_SPI(23)
+#define EXYNOS4_IRQ_EINT8 IRQ_SPI(24)
+#define EXYNOS4_IRQ_EINT9 IRQ_SPI(25)
+#define EXYNOS4_IRQ_EINT10 IRQ_SPI(26)
+#define EXYNOS4_IRQ_EINT11 IRQ_SPI(27)
+#define EXYNOS4_IRQ_EINT12 IRQ_SPI(28)
+#define EXYNOS4_IRQ_EINT13 IRQ_SPI(29)
+#define EXYNOS4_IRQ_EINT14 IRQ_SPI(30)
+#define EXYNOS4_IRQ_EINT15 IRQ_SPI(31)
+
+#define EXYNOS4_IRQ_MDMA0 IRQ_SPI(33)
+#define EXYNOS4_IRQ_MDMA1 IRQ_SPI(34)
+#define EXYNOS4_IRQ_PDMA0 IRQ_SPI(35)
+#define EXYNOS4_IRQ_PDMA1 IRQ_SPI(36)
+#define EXYNOS4_IRQ_TIMER0_VIC IRQ_SPI(37)
+#define EXYNOS4_IRQ_TIMER1_VIC IRQ_SPI(38)
+#define EXYNOS4_IRQ_TIMER2_VIC IRQ_SPI(39)
+#define EXYNOS4_IRQ_TIMER3_VIC IRQ_SPI(40)
+#define EXYNOS4_IRQ_TIMER4_VIC IRQ_SPI(41)
+#define EXYNOS4_IRQ_MCT_L0 IRQ_SPI(42)
+#define EXYNOS4_IRQ_WDT IRQ_SPI(43)
+#define EXYNOS4_IRQ_RTC_ALARM IRQ_SPI(44)
+#define EXYNOS4_IRQ_RTC_TIC IRQ_SPI(45)
+#define EXYNOS4_IRQ_GPIO_XB IRQ_SPI(46)
+#define EXYNOS4_IRQ_GPIO_XA IRQ_SPI(47)
+#define EXYNOS4_IRQ_MCT_L1 IRQ_SPI(48)
#define EXYNOS4_IRQ_UART0 IRQ_SPI(52)
#define EXYNOS4_IRQ_UART1 IRQ_SPI(53)
#define EXYNOS4_IRQ_UART2 IRQ_SPI(54)
#define EXYNOS4_IRQ_UART3 IRQ_SPI(55)
#define EXYNOS4_IRQ_UART4 IRQ_SPI(56)
+#define EXYNOS4_IRQ_MCT_G0 IRQ_SPI(57)
+#define EXYNOS4_IRQ_IIC IRQ_SPI(58)
+#define EXYNOS4_IRQ_IIC1 IRQ_SPI(59)
+#define EXYNOS4_IRQ_IIC2 IRQ_SPI(60)
+#define EXYNOS4_IRQ_IIC3 IRQ_SPI(61)
+#define EXYNOS4_IRQ_IIC4 IRQ_SPI(62)
+#define EXYNOS4_IRQ_IIC5 IRQ_SPI(63)
+#define EXYNOS4_IRQ_IIC6 IRQ_SPI(64)
+#define EXYNOS4_IRQ_IIC7 IRQ_SPI(65)
+#define EXYNOS4_IRQ_SPI0 IRQ_SPI(66)
+#define EXYNOS4_IRQ_SPI1 IRQ_SPI(67)
+#define EXYNOS4_IRQ_SPI2 IRQ_SPI(68)
+
+#define EXYNOS4_IRQ_USB_HOST IRQ_SPI(70)
+#define EXYNOS4_IRQ_USB_HSOTG IRQ_SPI(71)
+#define EXYNOS4_IRQ_MODEM_IF IRQ_SPI(72)
+#define EXYNOS4_IRQ_HSMMC0 IRQ_SPI(73)
+#define EXYNOS4_IRQ_HSMMC1 IRQ_SPI(74)
+#define EXYNOS4_IRQ_HSMMC2 IRQ_SPI(75)
+#define EXYNOS4_IRQ_HSMMC3 IRQ_SPI(76)
+#define EXYNOS4_IRQ_DWMCI IRQ_SPI(77)
+
+#define EXYNOS4_IRQ_MIPI_CSIS0 IRQ_SPI(78)
+#define EXYNOS4_IRQ_MIPI_CSIS1 IRQ_SPI(80)
+
+#define EXYNOS4_IRQ_ONENAND_AUDI IRQ_SPI(82)
+#define EXYNOS4_IRQ_ROTATOR IRQ_SPI(83)
+#define EXYNOS4_IRQ_FIMC0 IRQ_SPI(84)
+#define EXYNOS4_IRQ_FIMC1 IRQ_SPI(85)
+#define EXYNOS4_IRQ_FIMC2 IRQ_SPI(86)
+#define EXYNOS4_IRQ_FIMC3 IRQ_SPI(87)
+#define EXYNOS4_IRQ_JPEG IRQ_SPI(88)
+#define EXYNOS4_IRQ_2D IRQ_SPI(89)
+#define EXYNOS4_IRQ_PCIE IRQ_SPI(90)
+
+#define EXYNOS4_IRQ_MIXER IRQ_SPI(91)
+#define EXYNOS4_IRQ_HDMI IRQ_SPI(92)
+#define EXYNOS4_IRQ_IIC_HDMIPHY IRQ_SPI(93)
+#define EXYNOS4_IRQ_MFC IRQ_SPI(94)
+#define EXYNOS4_IRQ_SDO IRQ_SPI(95)
+
+#define EXYNOS4_IRQ_AUDIO_SS IRQ_SPI(96)
+#define EXYNOS4_IRQ_I2S0 IRQ_SPI(97)
+#define EXYNOS4_IRQ_I2S1 IRQ_SPI(98)
+#define EXYNOS4_IRQ_I2S2 IRQ_SPI(99)
+#define EXYNOS4_IRQ_AC97 IRQ_SPI(100)
+
+#define EXYNOS4_IRQ_SPDIF IRQ_SPI(104)
+#define EXYNOS4_IRQ_ADC0 IRQ_SPI(105)
+#define EXYNOS4_IRQ_PEN0 IRQ_SPI(106)
+#define EXYNOS4_IRQ_ADC1 IRQ_SPI(107)
+#define EXYNOS4_IRQ_PEN1 IRQ_SPI(108)
+#define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109)
+#define EXYNOS4_IRQ_PMU IRQ_SPI(110)
+#define EXYNOS4_IRQ_GPS IRQ_SPI(111)
+#define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
+#define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113)
+
+#define EXYNOS4_IRQ_TSI IRQ_SPI(115)
+#define EXYNOS4_IRQ_SATA IRQ_SPI(116)
+
+#define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
+#define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
+#define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
+#define EXYNOS4_IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3)
+#define EXYNOS4_IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4)
+#define EXYNOS4_IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5)
+#define EXYNOS4_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6)
+#define EXYNOS4_IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7)
+
+#define EXYNOS4_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0)
+#define EXYNOS4_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1)
+#define EXYNOS4_IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2)
+#define EXYNOS4_IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3)
+#define EXYNOS4_IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4)
+#define EXYNOS4_IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5)
+#define EXYNOS4_IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
+#define EXYNOS4_IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
+
+#define EXYNOS4_IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
+#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
+#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
+
+#define EXYNOS4_MAX_COMBINER_NR 16
+
+#define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16
+#define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9
+
+/*
+ * For Compatibility:
+ * the default is for EXYNOS4, and
+ * for exynos5, should be re-mapped at function
+ */
+
+#define IRQ_TIMER0_VIC EXYNOS4_IRQ_TIMER0_VIC
+#define IRQ_TIMER1_VIC EXYNOS4_IRQ_TIMER1_VIC
+#define IRQ_TIMER2_VIC EXYNOS4_IRQ_TIMER2_VIC
+#define IRQ_TIMER3_VIC EXYNOS4_IRQ_TIMER3_VIC
+#define IRQ_TIMER4_VIC EXYNOS4_IRQ_TIMER4_VIC
+
+#define IRQ_WDT EXYNOS4_IRQ_WDT
+#define IRQ_RTC_ALARM EXYNOS4_IRQ_RTC_ALARM
+#define IRQ_RTC_TIC EXYNOS4_IRQ_RTC_TIC
+#define IRQ_GPIO_XB EXYNOS4_IRQ_GPIO_XB
+#define IRQ_GPIO_XA EXYNOS4_IRQ_GPIO_XA
+
+#define IRQ_IIC EXYNOS4_IRQ_IIC
+#define IRQ_IIC1 EXYNOS4_IRQ_IIC1
+#define IRQ_IIC3 EXYNOS4_IRQ_IIC3
+#define IRQ_IIC5 EXYNOS4_IRQ_IIC5
+#define IRQ_IIC6 EXYNOS4_IRQ_IIC6
+#define IRQ_IIC7 EXYNOS4_IRQ_IIC7
+
+#define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST
+
+#define IRQ_HSMMC0 EXYNOS4_IRQ_HSMMC0
+#define IRQ_HSMMC1 EXYNOS4_IRQ_HSMMC1
+#define IRQ_HSMMC2 EXYNOS4_IRQ_HSMMC2
+#define IRQ_HSMMC3 EXYNOS4_IRQ_HSMMC3
+
+#define IRQ_MIPI_CSIS0 EXYNOS4_IRQ_MIPI_CSIS0
+
+#define IRQ_ONENAND_AUDI EXYNOS4_IRQ_ONENAND_AUDI
+
+#define IRQ_FIMC0 EXYNOS4_IRQ_FIMC0
+#define IRQ_FIMC1 EXYNOS4_IRQ_FIMC1
+#define IRQ_FIMC2 EXYNOS4_IRQ_FIMC2
+#define IRQ_FIMC3 EXYNOS4_IRQ_FIMC3
+#define IRQ_JPEG EXYNOS4_IRQ_JPEG
+#define IRQ_2D EXYNOS4_IRQ_2D
+
+#define IRQ_MIXER EXYNOS4_IRQ_MIXER
+#define IRQ_HDMI EXYNOS4_IRQ_HDMI
+#define IRQ_IIC_HDMIPHY EXYNOS4_IRQ_IIC_HDMIPHY
+#define IRQ_MFC EXYNOS4_IRQ_MFC
+#define IRQ_SDO EXYNOS4_IRQ_SDO
+
+#define IRQ_ADC EXYNOS4_IRQ_ADC0
+#define IRQ_TC EXYNOS4_IRQ_PEN0
+
+#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD
+#define IRQ_PMU EXYNOS4_IRQ_PMU
+
+#define IRQ_SYSMMU_MDMA0_0 EXYNOS4_IRQ_SYSMMU_MDMA0_0
+#define IRQ_SYSMMU_SSS_0 EXYNOS4_IRQ_SYSMMU_SSS_0
+#define IRQ_SYSMMU_FIMC0_0 EXYNOS4_IRQ_SYSMMU_FIMC0_0
+#define IRQ_SYSMMU_FIMC1_0 EXYNOS4_IRQ_SYSMMU_FIMC1_0
+#define IRQ_SYSMMU_FIMC2_0 EXYNOS4_IRQ_SYSMMU_FIMC2_0
+#define IRQ_SYSMMU_FIMC3_0 EXYNOS4_IRQ_SYSMMU_FIMC3_0
+#define IRQ_SYSMMU_JPEG_0 EXYNOS4_IRQ_SYSMMU_JPEG_0
+#define IRQ_SYSMMU_2D_0 EXYNOS4_IRQ_SYSMMU_2D_0
+#define IRQ_SYSMMU_ROTATOR_0 EXYNOS4_IRQ_SYSMMU_ROTATOR_0
+#define IRQ_SYSMMU_MDMA1_0 EXYNOS4_IRQ_SYSMMU_MDMA1_0
+#define IRQ_SYSMMU_LCD0_M0_0 EXYNOS4_IRQ_SYSMMU_LCD0_M0_0
+#define IRQ_SYSMMU_LCD1_M1_0 EXYNOS4_IRQ_SYSMMU_LCD1_M1_0
+#define IRQ_SYSMMU_TV_M0_0 EXYNOS4_IRQ_SYSMMU_TV_M0_0
+#define IRQ_SYSMMU_MFC_M0_0 EXYNOS4_IRQ_SYSMMU_MFC_M0_0
+#define IRQ_SYSMMU_MFC_M1_0 EXYNOS4_IRQ_SYSMMU_MFC_M1_0
+#define IRQ_SYSMMU_PCIE_0 EXYNOS4_IRQ_SYSMMU_PCIE_0
+
+#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO
+#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC
+#define IRQ_FIMD0_SYSTEM EXYNOS4_IRQ_FIMD0_SYSTEM
+
+#define IRQ_GPIO1_NR_GROUPS EXYNOS4_IRQ_GPIO1_NR_GROUPS
+#define IRQ_GPIO2_NR_GROUPS EXYNOS4_IRQ_GPIO2_NR_GROUPS
+
+/* For EXYNOS5 SoCs */
+
+#define EXYNOS5_IRQ_MDMA0 IRQ_SPI(33)
+#define EXYNOS5_IRQ_PDMA0 IRQ_SPI(34)
+#define EXYNOS5_IRQ_PDMA1 IRQ_SPI(35)
+#define EXYNOS5_IRQ_TIMER0_VIC IRQ_SPI(36)
+#define EXYNOS5_IRQ_TIMER1_VIC IRQ_SPI(37)
+#define EXYNOS5_IRQ_TIMER2_VIC IRQ_SPI(38)
+#define EXYNOS5_IRQ_TIMER3_VIC IRQ_SPI(39)
+#define EXYNOS5_IRQ_TIMER4_VIC IRQ_SPI(40)
+#define EXYNOS5_IRQ_RTIC IRQ_SPI(41)
+#define EXYNOS5_IRQ_WDT IRQ_SPI(42)
+#define EXYNOS5_IRQ_RTC_ALARM IRQ_SPI(43)
+#define EXYNOS5_IRQ_RTC_TIC IRQ_SPI(44)
+#define EXYNOS5_IRQ_GPIO_XB IRQ_SPI(45)
+#define EXYNOS5_IRQ_GPIO_XA IRQ_SPI(46)
+#define EXYNOS5_IRQ_GPIO IRQ_SPI(47)
+#define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48)
+#define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49)
+#define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50)
#define EXYNOS5_IRQ_UART0 IRQ_SPI(51)
#define EXYNOS5_IRQ_UART1 IRQ_SPI(52)
#define EXYNOS5_IRQ_UART2 IRQ_SPI(53)
#define EXYNOS5_IRQ_UART3 IRQ_SPI(54)
#define EXYNOS5_IRQ_UART4 IRQ_SPI(55)
+#define EXYNOS5_IRQ_IIC IRQ_SPI(56)
+#define EXYNOS5_IRQ_IIC1 IRQ_SPI(57)
+#define EXYNOS5_IRQ_IIC2 IRQ_SPI(58)
+#define EXYNOS5_IRQ_IIC3 IRQ_SPI(59)
+#define EXYNOS5_IRQ_IIC4 IRQ_SPI(60)
+#define EXYNOS5_IRQ_IIC5 IRQ_SPI(61)
+#define EXYNOS5_IRQ_IIC6 IRQ_SPI(62)
+#define EXYNOS5_IRQ_IIC7 IRQ_SPI(63)
+#define EXYNOS5_IRQ_IIC_HDMIPHY IRQ_SPI(64)
+#define EXYNOS5_IRQ_TMU IRQ_SPI(65)
+#define EXYNOS5_IRQ_FIQ_0 IRQ_SPI(66)
+#define EXYNOS5_IRQ_FIQ_1 IRQ_SPI(67)
+#define EXYNOS5_IRQ_SPI0 IRQ_SPI(68)
+#define EXYNOS5_IRQ_SPI1 IRQ_SPI(69)
+#define EXYNOS5_IRQ_SPI2 IRQ_SPI(70)
+#define EXYNOS5_IRQ_USB_HOST IRQ_SPI(71)
+#define EXYNOS5_IRQ_USB3_DRD IRQ_SPI(72)
+#define EXYNOS5_IRQ_MIPI_HSI IRQ_SPI(73)
+#define EXYNOS5_IRQ_USB_HSOTG IRQ_SPI(74)
+#define EXYNOS5_IRQ_HSMMC0 IRQ_SPI(75)
+#define EXYNOS5_IRQ_HSMMC1 IRQ_SPI(76)
+#define EXYNOS5_IRQ_HSMMC2 IRQ_SPI(77)
+#define EXYNOS5_IRQ_HSMMC3 IRQ_SPI(78)
+#define EXYNOS5_IRQ_MIPICSI0 IRQ_SPI(79)
+#define EXYNOS5_IRQ_MIPICSI1 IRQ_SPI(80)
+#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT IRQ_SPI(81)
+#define EXYNOS5_IRQ_MIPIDSI0 IRQ_SPI(82)
+#define EXYNOS5_IRQ_ROTATOR IRQ_SPI(84)
+#define EXYNOS5_IRQ_GSC0 IRQ_SPI(85)
+#define EXYNOS5_IRQ_GSC1 IRQ_SPI(86)
+#define EXYNOS5_IRQ_GSC2 IRQ_SPI(87)
+#define EXYNOS5_IRQ_GSC3 IRQ_SPI(88)
+#define EXYNOS5_IRQ_JPEG IRQ_SPI(89)
+#define EXYNOS5_IRQ_EFNFCON_DMA IRQ_SPI(90)
+#define EXYNOS5_IRQ_2D IRQ_SPI(91)
+#define EXYNOS5_IRQ_SFMC0 IRQ_SPI(92)
+#define EXYNOS5_IRQ_SFMC1 IRQ_SPI(93)
+#define EXYNOS5_IRQ_MIXER IRQ_SPI(94)
+#define EXYNOS5_IRQ_HDMI IRQ_SPI(95)
+#define EXYNOS5_IRQ_MFC IRQ_SPI(96)
+#define EXYNOS5_IRQ_AUDIO_SS IRQ_SPI(97)
+#define EXYNOS5_IRQ_I2S0 IRQ_SPI(98)
+#define EXYNOS5_IRQ_I2S1 IRQ_SPI(99)
+#define EXYNOS5_IRQ_I2S2 IRQ_SPI(100)
+#define EXYNOS5_IRQ_AC97 IRQ_SPI(101)
+#define EXYNOS5_IRQ_PCM0 IRQ_SPI(102)
+#define EXYNOS5_IRQ_PCM1 IRQ_SPI(103)
+#define EXYNOS5_IRQ_PCM2 IRQ_SPI(104)
+#define EXYNOS5_IRQ_SPDIF IRQ_SPI(105)
+#define EXYNOS5_IRQ_ADC0 IRQ_SPI(106)
+
+#define EXYNOS5_IRQ_SATA_PHY IRQ_SPI(108)
+#define EXYNOS5_IRQ_SATA_PMEMREQ IRQ_SPI(109)
+#define EXYNOS5_IRQ_CAM_C IRQ_SPI(110)
+#define EXYNOS5_IRQ_EAGLE_PMU IRQ_SPI(111)
+#define EXYNOS5_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
+#define EXYNOS5_IRQ_DP1_INTP1 IRQ_SPI(113)
+#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
+#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
+#define EXYNOS5_IRQ_NFCON IRQ_SPI(116)
+
+#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
+#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
+#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
+#define EXYNOS5_IRQ_FIMC_LITE1 IRQ_SPI(126)
+#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127)
+
+#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2)
+#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(1, 6)
+
+#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0)
+#define EXYNOS5_IRQ_SYSMMU_GSC0_1 COMBINER_IRQ(2, 1)
+#define EXYNOS5_IRQ_SYSMMU_GSC1_0 COMBINER_IRQ(2, 2)
+#define EXYNOS5_IRQ_SYSMMU_GSC1_1 COMBINER_IRQ(2, 3)
+#define EXYNOS5_IRQ_SYSMMU_GSC2_0 COMBINER_IRQ(2, 4)
+#define EXYNOS5_IRQ_SYSMMU_GSC2_1 COMBINER_IRQ(2, 5)
+#define EXYNOS5_IRQ_SYSMMU_GSC3_0 COMBINER_IRQ(2, 6)
+#define EXYNOS5_IRQ_SYSMMU_GSC3_1 COMBINER_IRQ(2, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_FIMD1_0 COMBINER_IRQ(3, 2)
+#define EXYNOS5_IRQ_SYSMMU_FIMD1_1 COMBINER_IRQ(3, 3)
+#define EXYNOS5_IRQ_SYSMMU_LITE0_0 COMBINER_IRQ(3, 4)
+#define EXYNOS5_IRQ_SYSMMU_LITE0_1 COMBINER_IRQ(3, 5)
+#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_0 COMBINER_IRQ(3, 6)
+#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_1 COMBINER_IRQ(3, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(4, 0)
+#define EXYNOS5_IRQ_SYSMMU_ROTATOR_1 COMBINER_IRQ(4, 1)
+#define EXYNOS5_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 2)
+#define EXYNOS5_IRQ_SYSMMU_JPEG_1 COMBINER_IRQ(4, 3)
+
+#define EXYNOS5_IRQ_SYSMMU_FD_0 COMBINER_IRQ(5, 0)
+#define EXYNOS5_IRQ_SYSMMU_FD_1 COMBINER_IRQ(5, 1)
+#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_0 COMBINER_IRQ(5, 2)
+#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_1 COMBINER_IRQ(5, 3)
+#define EXYNOS5_IRQ_SYSMMU_MCUISP_0 COMBINER_IRQ(5, 4)
+#define EXYNOS5_IRQ_SYSMMU_MCUISP_1 COMBINER_IRQ(5, 5)
+#define EXYNOS5_IRQ_SYSMMU_3DNR_0 COMBINER_IRQ(5, 6)
+#define EXYNOS5_IRQ_SYSMMU_3DNR_1 COMBINER_IRQ(5, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_ARM_0 COMBINER_IRQ(6, 0)
+#define EXYNOS5_IRQ_SYSMMU_ARM_1 COMBINER_IRQ(6, 1)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(6, 2)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(6, 3)
+#define EXYNOS5_IRQ_SYSMMU_RTIC_0 COMBINER_IRQ(6, 4)
+#define EXYNOS5_IRQ_SYSMMU_RTIC_1 COMBINER_IRQ(6, 5)
+#define EXYNOS5_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(6, 6)
+#define EXYNOS5_IRQ_SYSMMU_SSS_1 COMBINER_IRQ(6, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(7, 0)
+#define EXYNOS5_IRQ_SYSMMU_MDMA0_1 COMBINER_IRQ(7, 1)
+#define EXYNOS5_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(7, 2)
+#define EXYNOS5_IRQ_SYSMMU_MDMA1_1 COMBINER_IRQ(7, 3)
+#define EXYNOS5_IRQ_SYSMMU_TV_0 COMBINER_IRQ(7, 4)
+#define EXYNOS5_IRQ_SYSMMU_TV_1 COMBINER_IRQ(7, 5)
+#define EXYNOS5_IRQ_SYSMMU_GPSX_0 COMBINER_IRQ(7, 6)
+#define EXYNOS5_IRQ_SYSMMU_GPSX_1 COMBINER_IRQ(7, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(8, 5)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(8, 6)
+
+#define EXYNOS5_IRQ_SYSMMU_DIS1_0 COMBINER_IRQ(9, 4)
+#define EXYNOS5_IRQ_SYSMMU_DIS1_1 COMBINER_IRQ(9, 5)
+
+#define EXYNOS5_IRQ_DP COMBINER_IRQ(10, 3)
+#define EXYNOS5_IRQ_SYSMMU_DIS0_0 COMBINER_IRQ(10, 4)
+#define EXYNOS5_IRQ_SYSMMU_DIS0_1 COMBINER_IRQ(10, 5)
+#define EXYNOS5_IRQ_SYSMMU_ISP_0 COMBINER_IRQ(10, 6)
+#define EXYNOS5_IRQ_SYSMMU_ISP_1 COMBINER_IRQ(10, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_ODC_0 COMBINER_IRQ(11, 0)
+#define EXYNOS5_IRQ_SYSMMU_ODC_1 COMBINER_IRQ(11, 1)
+#define EXYNOS5_IRQ_SYSMMU_DRC_0 COMBINER_IRQ(11, 6)
+#define EXYNOS5_IRQ_SYSMMU_DRC_1 COMBINER_IRQ(11, 7)
+
+#define EXYNOS5_IRQ_FIMD1_FIFO COMBINER_IRQ(18, 4)
+#define EXYNOS5_IRQ_FIMD1_VSYNC COMBINER_IRQ(18, 5)
+#define EXYNOS5_IRQ_FIMD1_SYSTEM COMBINER_IRQ(18, 6)
+
+#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
+#define EXYNOS5_IRQ_MCT_L0 COMBINER_IRQ(23, 1)
+#define EXYNOS5_IRQ_MCT_L1 COMBINER_IRQ(23, 2)
+#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3)
+#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4)
+#define EXYNOS5_IRQ_MCT_G2 COMBINER_IRQ(23, 5)
+#define EXYNOS5_IRQ_MCT_G3 COMBINER_IRQ(23, 6)
+
+#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
+#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
+#define EXYNOS5_IRQ_SYSMMU_LITE1_1 COMBINER_IRQ(24, 2)
+#define EXYNOS5_IRQ_SYSMMU_2D_0 COMBINER_IRQ(24, 5)
+#define EXYNOS5_IRQ_SYSMMU_2D_1 COMBINER_IRQ(24, 6)
+
+#define EXYNOS5_IRQ_EINT2 COMBINER_IRQ(25, 0)
+#define EXYNOS5_IRQ_EINT3 COMBINER_IRQ(25, 1)
+
+#define EXYNOS5_IRQ_EINT4 COMBINER_IRQ(26, 0)
+#define EXYNOS5_IRQ_EINT5 COMBINER_IRQ(26, 1)
+
+#define EXYNOS5_IRQ_EINT6 COMBINER_IRQ(27, 0)
+#define EXYNOS5_IRQ_EINT7 COMBINER_IRQ(27, 1)
+
+#define EXYNOS5_IRQ_EINT8 COMBINER_IRQ(28, 0)
+#define EXYNOS5_IRQ_EINT9 COMBINER_IRQ(28, 1)
+
+#define EXYNOS5_IRQ_EINT10 COMBINER_IRQ(29, 0)
+#define EXYNOS5_IRQ_EINT11 COMBINER_IRQ(29, 1)
+
+#define EXYNOS5_IRQ_EINT12 COMBINER_IRQ(30, 0)
+#define EXYNOS5_IRQ_EINT13 COMBINER_IRQ(30, 1)
+
+#define EXYNOS5_IRQ_EINT14 COMBINER_IRQ(31, 0)
+#define EXYNOS5_IRQ_EINT15 COMBINER_IRQ(31, 1)
+
+#define EXYNOS5_MAX_COMBINER_NR 32
+
+#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 13
+#define EXYNOS5_IRQ_GPIO2_NR_GROUPS 9
+#define EXYNOS5_IRQ_GPIO3_NR_GROUPS 5
+#define EXYNOS5_IRQ_GPIO4_NR_GROUPS 1
+
+#define MAX_COMBINER_NR (EXYNOS4_MAX_COMBINER_NR > EXYNOS5_MAX_COMBINER_NR ? \
+ EXYNOS4_MAX_COMBINER_NR : EXYNOS5_MAX_COMBINER_NR)
+
+#define S5P_EINT_BASE1 COMBINER_IRQ(MAX_COMBINER_NR, 0)
+#define S5P_EINT_BASE2 (S5P_EINT_BASE1 + 16)
+#define S5P_GPIOINT_BASE (S5P_EINT_BASE1 + 32)
+#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
+#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 85b5527..1016515 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -258,7 +258,10 @@ static void exynos4_clockevent_init(void)
mct_comp_device.cpumask = cpumask_of(0);
clockevents_register_device(&mct_comp_device);
- setup_irq(IRQ_MCT_G0, &mct_comp_event_irq);
+ if (soc_is_exynos5250())
+ setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
+ else
+ setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq);
}
#ifdef CONFIG_LOCAL_TIMERS
@@ -406,16 +409,16 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
mct_tick0_event_irq.dev_id = mevt;
- evt->irq = IRQ_MCT_L0;
- setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ evt->irq = EXYNOS4_IRQ_MCT_L0;
+ setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
} else {
mct_tick1_event_irq.dev_id = mevt;
- evt->irq = IRQ_MCT_L1;
- setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
- irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ evt->irq = EXYNOS4_IRQ_MCT_L1;
+ setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
+ irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
}
} else {
- enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0);
+ enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
}
}
@@ -437,7 +440,7 @@ void local_timer_stop(struct clock_event_device *evt)
else
remove_irq(evt->irq, &mct_tick1_event_irq);
else
- disable_percpu_irq(IRQ_MCT_LOCALTIMER);
+ disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER);
}
#endif /* CONFIG_LOCAL_TIMERS */
@@ -452,11 +455,11 @@ static void __init exynos4_timer_resources(void)
if (mct_int_type == MCT_INT_PPI) {
int err;
- err = request_percpu_irq(IRQ_MCT_LOCALTIMER,
+ err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER,
exynos4_mct_tick_isr, "MCT",
&percpu_mct_tick);
WARN(err, "MCT: can't request IRQ %d (%d)\n",
- IRQ_MCT_LOCALTIMER, err);
+ EXYNOS_IRQ_MCT_LOCALTIMER, err);
}
#endif /* CONFIG_LOCAL_TIMERS */
}
diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c
index 327acb3..d1bfeca 100644
--- a/arch/arm/plat-s5p/irq-pm.c
+++ b/arch/arm/plat-s5p/irq-pm.c
@@ -39,19 +39,32 @@ unsigned long s3c_irqwake_eintallow = 0xffffffffL;
int s3c_irq_wake(struct irq_data *data, unsigned int state)
{
unsigned long irqbit;
+ unsigned int irq_rtc_tic, irq_rtc_alarm;
+
+#ifdef CONFIG_ARCH_EXYNOS
+ if (soc_is_exynos5250()) {
+ irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
+ irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
+ } else {
+ irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
+ irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
+ }
+#else
+ irq_rtc_tic = IRQ_RTC_TIC;
+ irq_rtc_alarm = IRQ_RTC_ALARM;
+#endif
+
+ if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
+ irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
- switch (data->irq) {
- case IRQ_RTC_TIC:
- case IRQ_RTC_ALARM:
- irqbit = 1 << (data->irq + 1 - IRQ_RTC_ALARM);
if (!state)
s3c_irqwake_intmask |= irqbit;
else
s3c_irqwake_intmask &= ~irqbit;
- break;
- default:
+ } else {
return -ENOENT;
}
+
return 0;
}
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
index 51583cd..f980cf3 100644
--- a/arch/arm/plat-samsung/irq-vic-timer.c
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <mach/map.h>
+#include <plat/cpu.h>
#include <plat/irq-vic-timer.h>
#include <plat/regs-timer.h>
@@ -57,6 +58,21 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq)
struct irq_chip_type *ct;
unsigned int i;
+#ifdef CONFIG_ARCH_EXYNOS
+ if (soc_is_exynos5250()) {
+ pirq[0] = EXYNOS5_IRQ_TIMER0_VIC;
+ pirq[1] = EXYNOS5_IRQ_TIMER1_VIC;
+ pirq[2] = EXYNOS5_IRQ_TIMER2_VIC;
+ pirq[3] = EXYNOS5_IRQ_TIMER3_VIC;
+ pirq[4] = EXYNOS5_IRQ_TIMER4_VIC;
+ } else {
+ pirq[0] = EXYNOS4_IRQ_TIMER0_VIC;
+ pirq[1] = EXYNOS4_IRQ_TIMER1_VIC;
+ pirq[2] = EXYNOS4_IRQ_TIMER2_VIC;
+ pirq[3] = EXYNOS4_IRQ_TIMER3_VIC;
+ pirq[4] = EXYNOS4_IRQ_TIMER4_VIC;
+ }
+#endif
s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
S3C64XX_TINT_CSTAT, handle_level_irq);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 07/12] ARM: EXYNOS: add interrupt definitions for EXYNOS5250
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds the interrupt definitions for EXYNOS5250 at
<mach/irqs.h> file and it is needed for EXYNOS5250 SoC.
As a note, for single zImage of EXYNOS4 and EXYNOS5, prefix
of EXYNOS4_ and EXYNOS5_ has been added.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/common.c | 101 ++++--
arch/arm/mach-exynos/dev-ahci.c | 4 +-
arch/arm/mach-exynos/dev-audio.c | 4 +-
arch/arm/mach-exynos/dma.c | 6 +-
arch/arm/mach-exynos/include/mach/irqs.h | 587 ++++++++++++++++++++++--------
arch/arm/mach-exynos/mct.c | 23 +-
arch/arm/plat-s5p/irq-pm.c | 25 +-
arch/arm/plat-samsung/irq-vic-timer.c | 16 +
8 files changed, 558 insertions(+), 208 deletions(-)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 7fdb139..4ef0cb5 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -345,6 +345,11 @@ static void __init exynos5_map_io(void)
{
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
+ s3c_device_i2c0.resource[0].start = EXYNOS5_PA_IIC(0);
+ s3c_device_i2c0.resource[0].end = EXYNOS5_PA_IIC(0) + SZ_4K - 1;
+ s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
+ s3c_device_i2c0.resource[1].end = EXYNOS5_IRQ_IIC;
+
/* The I2C bus controllers are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
@@ -451,7 +456,14 @@ static struct irq_chip combiner_chip = {
static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq)
{
- if (combiner_nr >= MAX_COMBINER_NR)
+ unsigned int max_nr;
+
+ if (soc_is_exynos5250())
+ max_nr = EXYNOS5_MAX_COMBINER_NR;
+ else
+ max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+ if (combiner_nr >= max_nr)
BUG();
if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0)
BUG();
@@ -462,8 +474,14 @@ static void __init combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start)
{
unsigned int i;
+ unsigned int max_nr;
- if (combiner_nr >= MAX_COMBINER_NR)
+ if (soc_is_exynos5250())
+ max_nr = EXYNOS5_MAX_COMBINER_NR;
+ else
+ max_nr = EXYNOS4_MAX_COMBINER_NR;
+
+ if (combiner_nr >= max_nr)
BUG();
combiner_data[combiner_nr].base = base;
@@ -506,7 +524,7 @@ void __init exynos4_init_irq(void)
of_irq_init(exynos4_dt_irq_match);
#endif
- for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+ for (irq = 0; irq < EXYNOS4_MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
@@ -527,7 +545,7 @@ void __init exynos5_init_irq(void)
gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
- for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
+ for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
COMBINER_IRQ(irq, 0));
combiner_cascade_irq(irq, IRQ_SPI(irq));
@@ -651,27 +669,43 @@ static DEFINE_SPINLOCK(eint_lock);
static unsigned int eint0_15_data[16];
-static unsigned int exynos4_get_irq_nr(unsigned int number)
-{
- u32 ret = 0;
-
- switch (number) {
- case 0 ... 3:
- ret = (number + IRQ_EINT0);
- break;
- case 4 ... 7:
- ret = (number + (IRQ_EINT4 - 4));
- break;
- case 8 ... 15:
- ret = (number + (IRQ_EINT8 - 8));
- break;
- default:
- printk(KERN_ERR "number available : %d\n", number);
- }
-
- return ret;
-}
+static unsigned int exynos4_eint0_15_src_int[16] = {
+ EXYNOS4_IRQ_EINT0,
+ EXYNOS4_IRQ_EINT1,
+ EXYNOS4_IRQ_EINT2,
+ EXYNOS4_IRQ_EINT3,
+ EXYNOS4_IRQ_EINT4,
+ EXYNOS4_IRQ_EINT5,
+ EXYNOS4_IRQ_EINT6,
+ EXYNOS4_IRQ_EINT7,
+ EXYNOS4_IRQ_EINT8,
+ EXYNOS4_IRQ_EINT9,
+ EXYNOS4_IRQ_EINT10,
+ EXYNOS4_IRQ_EINT11,
+ EXYNOS4_IRQ_EINT12,
+ EXYNOS4_IRQ_EINT13,
+ EXYNOS4_IRQ_EINT14,
+ EXYNOS4_IRQ_EINT15,
+};
+static unsigned int exynos5_eint0_15_src_int[16] = {
+ EXYNOS5_IRQ_EINT0,
+ EXYNOS5_IRQ_EINT1,
+ EXYNOS5_IRQ_EINT2,
+ EXYNOS5_IRQ_EINT3,
+ EXYNOS5_IRQ_EINT4,
+ EXYNOS5_IRQ_EINT5,
+ EXYNOS5_IRQ_EINT6,
+ EXYNOS5_IRQ_EINT7,
+ EXYNOS5_IRQ_EINT8,
+ EXYNOS5_IRQ_EINT9,
+ EXYNOS5_IRQ_EINT10,
+ EXYNOS5_IRQ_EINT11,
+ EXYNOS5_IRQ_EINT12,
+ EXYNOS5_IRQ_EINT13,
+ EXYNOS5_IRQ_EINT14,
+ EXYNOS5_IRQ_EINT15,
+};
static inline void exynos4_irq_eint_mask(struct irq_data *data)
{
u32 mask;
@@ -816,7 +850,7 @@ static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
{
u32 *irq_data = irq_get_handler_data(irq);
struct irq_chip *chip = irq_get_chip(irq);
@@ -846,15 +880,22 @@ static int __init exynos4_init_irq_eint(void)
set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
}
- irq_set_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+ irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
for (irq = 0 ; irq <= 15 ; irq++) {
eint0_15_data[irq] = IRQ_EINT(irq);
- irq_set_handler_data(exynos4_get_irq_nr(irq),
- &eint0_15_data[irq]);
- irq_set_chained_handler(exynos4_get_irq_nr(irq),
- exynos4_irq_eint0_15);
+ if (soc_is_exynos5250()) {
+ irq_set_handler_data(exynos5_eint0_15_src_int[irq],
+ &eint0_15_data[irq]);
+ irq_set_chained_handler(exynos5_eint0_15_src_int[irq],
+ exynos_irq_eint0_15);
+ } else {
+ irq_set_handler_data(exynos4_eint0_15_src_int[irq],
+ &eint0_15_data[irq]);
+ irq_set_chained_handler(exynos4_eint0_15_src_int[irq],
+ exynos_irq_eint0_15);
+ }
}
return 0;
diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c
index f57a3de..50ce5b0 100644
--- a/arch/arm/mach-exynos/dev-ahci.c
+++ b/arch/arm/mach-exynos/dev-ahci.c
@@ -242,8 +242,8 @@ static struct resource exynos4_ahci_resource[] = {
.flags = IORESOURCE_MEM,
},
[1] = {
- .start = IRQ_SATA,
- .end = IRQ_SATA,
+ .start = EXYNOS4_IRQ_SATA,
+ .end = EXYNOS4_IRQ_SATA,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
index 5a9f9c2e..7199e1a 100644
--- a/arch/arm/mach-exynos/dev-audio.c
+++ b/arch/arm/mach-exynos/dev-audio.c
@@ -304,8 +304,8 @@ static struct resource exynos4_ac97_resource[] = {
.flags = IORESOURCE_DMA,
},
[4] = {
- .start = IRQ_AC97,
- .end = IRQ_AC97,
+ .start = EXYNOS4_IRQ_AC97,
+ .end = EXYNOS4_IRQ_AC97,
.flags = IORESOURCE_IRQ,
},
};
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
index 13607c4..3983abe 100644
--- a/arch/arm/mach-exynos/dma.c
+++ b/arch/arm/mach-exynos/dma.c
@@ -108,7 +108,7 @@ static u8 exynos4212_pdma0_peri[] = {
struct dma_pl330_platdata exynos4_pdma0_pdata;
static AMBA_AHB_DEVICE(exynos4_pdma0, "dma-pl330.0", 0x00041330,
- EXYNOS4_PA_PDMA0, {IRQ_PDMA0}, &exynos4_pdma0_pdata);
+ EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos4_pdma0_pdata);
static u8 exynos4210_pdma1_peri[] = {
DMACH_PCM0_RX,
@@ -174,7 +174,7 @@ static u8 exynos4212_pdma1_peri[] = {
static struct dma_pl330_platdata exynos4_pdma1_pdata;
static AMBA_AHB_DEVICE(exynos4_pdma1, "dma-pl330.1", 0x00041330,
- EXYNOS4_PA_PDMA1, {IRQ_PDMA1}, &exynos4_pdma1_pdata);
+ EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos4_pdma1_pdata);
static u8 mdma_peri[] = {
DMACH_MTOM_0,
@@ -193,7 +193,7 @@ static struct dma_pl330_platdata exynos4_mdma1_pdata = {
};
static AMBA_AHB_DEVICE(exynos4_mdma1, "dma-pl330.2", 0x00041330,
- EXYNOS4_PA_MDMA1, {IRQ_MDMA1}, &exynos4_mdma1_pdata);
+ EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos4_mdma1_pdata);
static int __init exynos4_dma_init(void)
{
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
index f78070e..9bee853 100644
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ b/arch/arm/mach-exynos/include/mach/irqs.h
@@ -1,9 +1,8 @@
-/* linux/arch/arm/mach-exynos4/include/mach/irqs.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+/*
+ * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
- * EXYNOS4 - IRQ definitions
+ * EXYNOS - IRQ definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -17,172 +16,450 @@
/* PPI: Private Peripheral Interrupt */
-#define IRQ_PPI(x) (x+16)
-
-#define IRQ_MCT_LOCALTIMER IRQ_PPI(12)
+#define IRQ_PPI(x) (x + 16)
/* SPI: Shared Peripheral Interrupt */
-#define IRQ_SPI(x) (x+32)
-
-#define IRQ_EINT0 IRQ_SPI(16)
-#define IRQ_EINT1 IRQ_SPI(17)
-#define IRQ_EINT2 IRQ_SPI(18)
-#define IRQ_EINT3 IRQ_SPI(19)
-#define IRQ_EINT4 IRQ_SPI(20)
-#define IRQ_EINT5 IRQ_SPI(21)
-#define IRQ_EINT6 IRQ_SPI(22)
-#define IRQ_EINT7 IRQ_SPI(23)
-#define IRQ_EINT8 IRQ_SPI(24)
-#define IRQ_EINT9 IRQ_SPI(25)
-#define IRQ_EINT10 IRQ_SPI(26)
-#define IRQ_EINT11 IRQ_SPI(27)
-#define IRQ_EINT12 IRQ_SPI(28)
-#define IRQ_EINT13 IRQ_SPI(29)
-#define IRQ_EINT14 IRQ_SPI(30)
-#define IRQ_EINT15 IRQ_SPI(31)
-#define IRQ_EINT16_31 IRQ_SPI(32)
-
-#define IRQ_MDMA0 IRQ_SPI(33)
-#define IRQ_MDMA1 IRQ_SPI(34)
-#define IRQ_PDMA0 IRQ_SPI(35)
-#define IRQ_PDMA1 IRQ_SPI(36)
-#define IRQ_TIMER0_VIC IRQ_SPI(37)
-#define IRQ_TIMER1_VIC IRQ_SPI(38)
-#define IRQ_TIMER2_VIC IRQ_SPI(39)
-#define IRQ_TIMER3_VIC IRQ_SPI(40)
-#define IRQ_TIMER4_VIC IRQ_SPI(41)
-#define IRQ_MCT_L0 IRQ_SPI(42)
-#define IRQ_WDT IRQ_SPI(43)
-#define IRQ_RTC_ALARM IRQ_SPI(44)
-#define IRQ_RTC_TIC IRQ_SPI(45)
-#define IRQ_GPIO_XB IRQ_SPI(46)
-#define IRQ_GPIO_XA IRQ_SPI(47)
-#define IRQ_MCT_L1 IRQ_SPI(48)
-
-#define IRQ_UART0 IRQ_SPI(52)
-#define IRQ_UART1 IRQ_SPI(53)
-#define IRQ_UART2 IRQ_SPI(54)
-#define IRQ_UART3 IRQ_SPI(55)
-#define IRQ_UART4 IRQ_SPI(56)
-#define IRQ_MCT_G0 IRQ_SPI(57)
-#define IRQ_IIC IRQ_SPI(58)
-#define IRQ_IIC1 IRQ_SPI(59)
-#define IRQ_IIC2 IRQ_SPI(60)
-#define IRQ_IIC3 IRQ_SPI(61)
-#define IRQ_IIC4 IRQ_SPI(62)
-#define IRQ_IIC5 IRQ_SPI(63)
-#define IRQ_IIC6 IRQ_SPI(64)
-#define IRQ_IIC7 IRQ_SPI(65)
-#define IRQ_SPI0 IRQ_SPI(66)
-#define IRQ_SPI1 IRQ_SPI(67)
-#define IRQ_SPI2 IRQ_SPI(68)
-
-#define IRQ_USB_HOST IRQ_SPI(70)
-#define IRQ_USB_HSOTG IRQ_SPI(71)
-#define IRQ_MODEM_IF IRQ_SPI(72)
-#define IRQ_HSMMC0 IRQ_SPI(73)
-#define IRQ_HSMMC1 IRQ_SPI(74)
-#define IRQ_HSMMC2 IRQ_SPI(75)
-#define IRQ_HSMMC3 IRQ_SPI(76)
-#define IRQ_DWMCI IRQ_SPI(77)
-
-#define IRQ_MIPI_CSIS0 IRQ_SPI(78)
-#define IRQ_MIPI_CSIS1 IRQ_SPI(80)
-
-#define IRQ_ONENAND_AUDI IRQ_SPI(82)
-#define IRQ_ROTATOR IRQ_SPI(83)
-#define IRQ_FIMC0 IRQ_SPI(84)
-#define IRQ_FIMC1 IRQ_SPI(85)
-#define IRQ_FIMC2 IRQ_SPI(86)
-#define IRQ_FIMC3 IRQ_SPI(87)
-#define IRQ_JPEG IRQ_SPI(88)
-#define IRQ_2D IRQ_SPI(89)
-#define IRQ_PCIE IRQ_SPI(90)
-
-#define IRQ_MIXER IRQ_SPI(91)
-#define IRQ_HDMI IRQ_SPI(92)
-#define IRQ_IIC_HDMIPHY IRQ_SPI(93)
-#define IRQ_MFC IRQ_SPI(94)
-#define IRQ_SDO IRQ_SPI(95)
-
-#define IRQ_AUDIO_SS IRQ_SPI(96)
-#define IRQ_I2S0 IRQ_SPI(97)
-#define IRQ_I2S1 IRQ_SPI(98)
-#define IRQ_I2S2 IRQ_SPI(99)
-#define IRQ_AC97 IRQ_SPI(100)
-
-#define IRQ_SPDIF IRQ_SPI(104)
-#define IRQ_ADC0 IRQ_SPI(105)
-#define IRQ_PEN0 IRQ_SPI(106)
-#define IRQ_ADC1 IRQ_SPI(107)
-#define IRQ_PEN1 IRQ_SPI(108)
-#define IRQ_KEYPAD IRQ_SPI(109)
-#define IRQ_PMU IRQ_SPI(110)
-#define IRQ_GPS IRQ_SPI(111)
-#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
-#define IRQ_SLIMBUS IRQ_SPI(113)
-
-#define IRQ_TSI IRQ_SPI(115)
-#define IRQ_SATA IRQ_SPI(116)
-
-#define MAX_IRQ_IN_COMBINER 8
-#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
-#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
-
-#define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
-#define IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
-#define IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
-#define IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3)
-#define IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4)
-#define IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5)
-#define IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6)
-#define IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7)
-
-#define IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0)
-#define IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1)
-#define IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2)
-#define IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3)
-#define IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4)
-#define IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5)
-#define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
-#define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
-
-#define IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
-#define IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
-#define IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
-
-#define MAX_COMBINER_NR 16
-
-#define IRQ_ADC IRQ_ADC0
-#define IRQ_TC IRQ_PEN0
-
-#define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0)
-
-#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0)
-#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16)
-
-/* optional GPIO interrupts */
-#define S5P_GPIOINT_BASE (S5P_IRQ_EINT_BASE + 32)
-#define IRQ_GPIO1_NR_GROUPS 16
-#define IRQ_GPIO2_NR_GROUPS 9
-#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
-
-#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
+#define IRQ_SPI(x) (x + 32)
-/* Set the default NR_IRQS */
-#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
+/* COMBINER */
+
+#define MAX_IRQ_IN_COMBINER 8
+#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
+#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
+
+/* For EXYNOS4 and EXYNOS5 */
+
+#define EXYNOS_IRQ_MCT_LOCALTIMER IRQ_PPI(12)
+
+#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32)
+
+/* For EXYNOS4 SoCs */
+
+#define EXYNOS4_IRQ_EINT0 IRQ_SPI(16)
+#define EXYNOS4_IRQ_EINT1 IRQ_SPI(17)
+#define EXYNOS4_IRQ_EINT2 IRQ_SPI(18)
+#define EXYNOS4_IRQ_EINT3 IRQ_SPI(19)
+#define EXYNOS4_IRQ_EINT4 IRQ_SPI(20)
+#define EXYNOS4_IRQ_EINT5 IRQ_SPI(21)
+#define EXYNOS4_IRQ_EINT6 IRQ_SPI(22)
+#define EXYNOS4_IRQ_EINT7 IRQ_SPI(23)
+#define EXYNOS4_IRQ_EINT8 IRQ_SPI(24)
+#define EXYNOS4_IRQ_EINT9 IRQ_SPI(25)
+#define EXYNOS4_IRQ_EINT10 IRQ_SPI(26)
+#define EXYNOS4_IRQ_EINT11 IRQ_SPI(27)
+#define EXYNOS4_IRQ_EINT12 IRQ_SPI(28)
+#define EXYNOS4_IRQ_EINT13 IRQ_SPI(29)
+#define EXYNOS4_IRQ_EINT14 IRQ_SPI(30)
+#define EXYNOS4_IRQ_EINT15 IRQ_SPI(31)
+
+#define EXYNOS4_IRQ_MDMA0 IRQ_SPI(33)
+#define EXYNOS4_IRQ_MDMA1 IRQ_SPI(34)
+#define EXYNOS4_IRQ_PDMA0 IRQ_SPI(35)
+#define EXYNOS4_IRQ_PDMA1 IRQ_SPI(36)
+#define EXYNOS4_IRQ_TIMER0_VIC IRQ_SPI(37)
+#define EXYNOS4_IRQ_TIMER1_VIC IRQ_SPI(38)
+#define EXYNOS4_IRQ_TIMER2_VIC IRQ_SPI(39)
+#define EXYNOS4_IRQ_TIMER3_VIC IRQ_SPI(40)
+#define EXYNOS4_IRQ_TIMER4_VIC IRQ_SPI(41)
+#define EXYNOS4_IRQ_MCT_L0 IRQ_SPI(42)
+#define EXYNOS4_IRQ_WDT IRQ_SPI(43)
+#define EXYNOS4_IRQ_RTC_ALARM IRQ_SPI(44)
+#define EXYNOS4_IRQ_RTC_TIC IRQ_SPI(45)
+#define EXYNOS4_IRQ_GPIO_XB IRQ_SPI(46)
+#define EXYNOS4_IRQ_GPIO_XA IRQ_SPI(47)
+#define EXYNOS4_IRQ_MCT_L1 IRQ_SPI(48)
#define EXYNOS4_IRQ_UART0 IRQ_SPI(52)
#define EXYNOS4_IRQ_UART1 IRQ_SPI(53)
#define EXYNOS4_IRQ_UART2 IRQ_SPI(54)
#define EXYNOS4_IRQ_UART3 IRQ_SPI(55)
#define EXYNOS4_IRQ_UART4 IRQ_SPI(56)
+#define EXYNOS4_IRQ_MCT_G0 IRQ_SPI(57)
+#define EXYNOS4_IRQ_IIC IRQ_SPI(58)
+#define EXYNOS4_IRQ_IIC1 IRQ_SPI(59)
+#define EXYNOS4_IRQ_IIC2 IRQ_SPI(60)
+#define EXYNOS4_IRQ_IIC3 IRQ_SPI(61)
+#define EXYNOS4_IRQ_IIC4 IRQ_SPI(62)
+#define EXYNOS4_IRQ_IIC5 IRQ_SPI(63)
+#define EXYNOS4_IRQ_IIC6 IRQ_SPI(64)
+#define EXYNOS4_IRQ_IIC7 IRQ_SPI(65)
+#define EXYNOS4_IRQ_SPI0 IRQ_SPI(66)
+#define EXYNOS4_IRQ_SPI1 IRQ_SPI(67)
+#define EXYNOS4_IRQ_SPI2 IRQ_SPI(68)
+
+#define EXYNOS4_IRQ_USB_HOST IRQ_SPI(70)
+#define EXYNOS4_IRQ_USB_HSOTG IRQ_SPI(71)
+#define EXYNOS4_IRQ_MODEM_IF IRQ_SPI(72)
+#define EXYNOS4_IRQ_HSMMC0 IRQ_SPI(73)
+#define EXYNOS4_IRQ_HSMMC1 IRQ_SPI(74)
+#define EXYNOS4_IRQ_HSMMC2 IRQ_SPI(75)
+#define EXYNOS4_IRQ_HSMMC3 IRQ_SPI(76)
+#define EXYNOS4_IRQ_DWMCI IRQ_SPI(77)
+
+#define EXYNOS4_IRQ_MIPI_CSIS0 IRQ_SPI(78)
+#define EXYNOS4_IRQ_MIPI_CSIS1 IRQ_SPI(80)
+
+#define EXYNOS4_IRQ_ONENAND_AUDI IRQ_SPI(82)
+#define EXYNOS4_IRQ_ROTATOR IRQ_SPI(83)
+#define EXYNOS4_IRQ_FIMC0 IRQ_SPI(84)
+#define EXYNOS4_IRQ_FIMC1 IRQ_SPI(85)
+#define EXYNOS4_IRQ_FIMC2 IRQ_SPI(86)
+#define EXYNOS4_IRQ_FIMC3 IRQ_SPI(87)
+#define EXYNOS4_IRQ_JPEG IRQ_SPI(88)
+#define EXYNOS4_IRQ_2D IRQ_SPI(89)
+#define EXYNOS4_IRQ_PCIE IRQ_SPI(90)
+
+#define EXYNOS4_IRQ_MIXER IRQ_SPI(91)
+#define EXYNOS4_IRQ_HDMI IRQ_SPI(92)
+#define EXYNOS4_IRQ_IIC_HDMIPHY IRQ_SPI(93)
+#define EXYNOS4_IRQ_MFC IRQ_SPI(94)
+#define EXYNOS4_IRQ_SDO IRQ_SPI(95)
+
+#define EXYNOS4_IRQ_AUDIO_SS IRQ_SPI(96)
+#define EXYNOS4_IRQ_I2S0 IRQ_SPI(97)
+#define EXYNOS4_IRQ_I2S1 IRQ_SPI(98)
+#define EXYNOS4_IRQ_I2S2 IRQ_SPI(99)
+#define EXYNOS4_IRQ_AC97 IRQ_SPI(100)
+
+#define EXYNOS4_IRQ_SPDIF IRQ_SPI(104)
+#define EXYNOS4_IRQ_ADC0 IRQ_SPI(105)
+#define EXYNOS4_IRQ_PEN0 IRQ_SPI(106)
+#define EXYNOS4_IRQ_ADC1 IRQ_SPI(107)
+#define EXYNOS4_IRQ_PEN1 IRQ_SPI(108)
+#define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109)
+#define EXYNOS4_IRQ_PMU IRQ_SPI(110)
+#define EXYNOS4_IRQ_GPS IRQ_SPI(111)
+#define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
+#define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113)
+
+#define EXYNOS4_IRQ_TSI IRQ_SPI(115)
+#define EXYNOS4_IRQ_SATA IRQ_SPI(116)
+
+#define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
+#define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
+#define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
+#define EXYNOS4_IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3)
+#define EXYNOS4_IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4)
+#define EXYNOS4_IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5)
+#define EXYNOS4_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6)
+#define EXYNOS4_IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7)
+
+#define EXYNOS4_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0)
+#define EXYNOS4_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1)
+#define EXYNOS4_IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2)
+#define EXYNOS4_IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3)
+#define EXYNOS4_IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4)
+#define EXYNOS4_IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5)
+#define EXYNOS4_IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
+#define EXYNOS4_IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
+
+#define EXYNOS4_IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
+#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
+#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
+
+#define EXYNOS4_MAX_COMBINER_NR 16
+
+#define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16
+#define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9
+
+/*
+ * For Compatibility:
+ * the default is for EXYNOS4, and
+ * for exynos5, should be re-mapped@function
+ */
+
+#define IRQ_TIMER0_VIC EXYNOS4_IRQ_TIMER0_VIC
+#define IRQ_TIMER1_VIC EXYNOS4_IRQ_TIMER1_VIC
+#define IRQ_TIMER2_VIC EXYNOS4_IRQ_TIMER2_VIC
+#define IRQ_TIMER3_VIC EXYNOS4_IRQ_TIMER3_VIC
+#define IRQ_TIMER4_VIC EXYNOS4_IRQ_TIMER4_VIC
+
+#define IRQ_WDT EXYNOS4_IRQ_WDT
+#define IRQ_RTC_ALARM EXYNOS4_IRQ_RTC_ALARM
+#define IRQ_RTC_TIC EXYNOS4_IRQ_RTC_TIC
+#define IRQ_GPIO_XB EXYNOS4_IRQ_GPIO_XB
+#define IRQ_GPIO_XA EXYNOS4_IRQ_GPIO_XA
+
+#define IRQ_IIC EXYNOS4_IRQ_IIC
+#define IRQ_IIC1 EXYNOS4_IRQ_IIC1
+#define IRQ_IIC3 EXYNOS4_IRQ_IIC3
+#define IRQ_IIC5 EXYNOS4_IRQ_IIC5
+#define IRQ_IIC6 EXYNOS4_IRQ_IIC6
+#define IRQ_IIC7 EXYNOS4_IRQ_IIC7
+
+#define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST
+
+#define IRQ_HSMMC0 EXYNOS4_IRQ_HSMMC0
+#define IRQ_HSMMC1 EXYNOS4_IRQ_HSMMC1
+#define IRQ_HSMMC2 EXYNOS4_IRQ_HSMMC2
+#define IRQ_HSMMC3 EXYNOS4_IRQ_HSMMC3
+
+#define IRQ_MIPI_CSIS0 EXYNOS4_IRQ_MIPI_CSIS0
+
+#define IRQ_ONENAND_AUDI EXYNOS4_IRQ_ONENAND_AUDI
+
+#define IRQ_FIMC0 EXYNOS4_IRQ_FIMC0
+#define IRQ_FIMC1 EXYNOS4_IRQ_FIMC1
+#define IRQ_FIMC2 EXYNOS4_IRQ_FIMC2
+#define IRQ_FIMC3 EXYNOS4_IRQ_FIMC3
+#define IRQ_JPEG EXYNOS4_IRQ_JPEG
+#define IRQ_2D EXYNOS4_IRQ_2D
+
+#define IRQ_MIXER EXYNOS4_IRQ_MIXER
+#define IRQ_HDMI EXYNOS4_IRQ_HDMI
+#define IRQ_IIC_HDMIPHY EXYNOS4_IRQ_IIC_HDMIPHY
+#define IRQ_MFC EXYNOS4_IRQ_MFC
+#define IRQ_SDO EXYNOS4_IRQ_SDO
+
+#define IRQ_ADC EXYNOS4_IRQ_ADC0
+#define IRQ_TC EXYNOS4_IRQ_PEN0
+
+#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD
+#define IRQ_PMU EXYNOS4_IRQ_PMU
+
+#define IRQ_SYSMMU_MDMA0_0 EXYNOS4_IRQ_SYSMMU_MDMA0_0
+#define IRQ_SYSMMU_SSS_0 EXYNOS4_IRQ_SYSMMU_SSS_0
+#define IRQ_SYSMMU_FIMC0_0 EXYNOS4_IRQ_SYSMMU_FIMC0_0
+#define IRQ_SYSMMU_FIMC1_0 EXYNOS4_IRQ_SYSMMU_FIMC1_0
+#define IRQ_SYSMMU_FIMC2_0 EXYNOS4_IRQ_SYSMMU_FIMC2_0
+#define IRQ_SYSMMU_FIMC3_0 EXYNOS4_IRQ_SYSMMU_FIMC3_0
+#define IRQ_SYSMMU_JPEG_0 EXYNOS4_IRQ_SYSMMU_JPEG_0
+#define IRQ_SYSMMU_2D_0 EXYNOS4_IRQ_SYSMMU_2D_0
+#define IRQ_SYSMMU_ROTATOR_0 EXYNOS4_IRQ_SYSMMU_ROTATOR_0
+#define IRQ_SYSMMU_MDMA1_0 EXYNOS4_IRQ_SYSMMU_MDMA1_0
+#define IRQ_SYSMMU_LCD0_M0_0 EXYNOS4_IRQ_SYSMMU_LCD0_M0_0
+#define IRQ_SYSMMU_LCD1_M1_0 EXYNOS4_IRQ_SYSMMU_LCD1_M1_0
+#define IRQ_SYSMMU_TV_M0_0 EXYNOS4_IRQ_SYSMMU_TV_M0_0
+#define IRQ_SYSMMU_MFC_M0_0 EXYNOS4_IRQ_SYSMMU_MFC_M0_0
+#define IRQ_SYSMMU_MFC_M1_0 EXYNOS4_IRQ_SYSMMU_MFC_M1_0
+#define IRQ_SYSMMU_PCIE_0 EXYNOS4_IRQ_SYSMMU_PCIE_0
+
+#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO
+#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC
+#define IRQ_FIMD0_SYSTEM EXYNOS4_IRQ_FIMD0_SYSTEM
+
+#define IRQ_GPIO1_NR_GROUPS EXYNOS4_IRQ_GPIO1_NR_GROUPS
+#define IRQ_GPIO2_NR_GROUPS EXYNOS4_IRQ_GPIO2_NR_GROUPS
+
+/* For EXYNOS5 SoCs */
+
+#define EXYNOS5_IRQ_MDMA0 IRQ_SPI(33)
+#define EXYNOS5_IRQ_PDMA0 IRQ_SPI(34)
+#define EXYNOS5_IRQ_PDMA1 IRQ_SPI(35)
+#define EXYNOS5_IRQ_TIMER0_VIC IRQ_SPI(36)
+#define EXYNOS5_IRQ_TIMER1_VIC IRQ_SPI(37)
+#define EXYNOS5_IRQ_TIMER2_VIC IRQ_SPI(38)
+#define EXYNOS5_IRQ_TIMER3_VIC IRQ_SPI(39)
+#define EXYNOS5_IRQ_TIMER4_VIC IRQ_SPI(40)
+#define EXYNOS5_IRQ_RTIC IRQ_SPI(41)
+#define EXYNOS5_IRQ_WDT IRQ_SPI(42)
+#define EXYNOS5_IRQ_RTC_ALARM IRQ_SPI(43)
+#define EXYNOS5_IRQ_RTC_TIC IRQ_SPI(44)
+#define EXYNOS5_IRQ_GPIO_XB IRQ_SPI(45)
+#define EXYNOS5_IRQ_GPIO_XA IRQ_SPI(46)
+#define EXYNOS5_IRQ_GPIO IRQ_SPI(47)
+#define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48)
+#define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49)
+#define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50)
#define EXYNOS5_IRQ_UART0 IRQ_SPI(51)
#define EXYNOS5_IRQ_UART1 IRQ_SPI(52)
#define EXYNOS5_IRQ_UART2 IRQ_SPI(53)
#define EXYNOS5_IRQ_UART3 IRQ_SPI(54)
#define EXYNOS5_IRQ_UART4 IRQ_SPI(55)
+#define EXYNOS5_IRQ_IIC IRQ_SPI(56)
+#define EXYNOS5_IRQ_IIC1 IRQ_SPI(57)
+#define EXYNOS5_IRQ_IIC2 IRQ_SPI(58)
+#define EXYNOS5_IRQ_IIC3 IRQ_SPI(59)
+#define EXYNOS5_IRQ_IIC4 IRQ_SPI(60)
+#define EXYNOS5_IRQ_IIC5 IRQ_SPI(61)
+#define EXYNOS5_IRQ_IIC6 IRQ_SPI(62)
+#define EXYNOS5_IRQ_IIC7 IRQ_SPI(63)
+#define EXYNOS5_IRQ_IIC_HDMIPHY IRQ_SPI(64)
+#define EXYNOS5_IRQ_TMU IRQ_SPI(65)
+#define EXYNOS5_IRQ_FIQ_0 IRQ_SPI(66)
+#define EXYNOS5_IRQ_FIQ_1 IRQ_SPI(67)
+#define EXYNOS5_IRQ_SPI0 IRQ_SPI(68)
+#define EXYNOS5_IRQ_SPI1 IRQ_SPI(69)
+#define EXYNOS5_IRQ_SPI2 IRQ_SPI(70)
+#define EXYNOS5_IRQ_USB_HOST IRQ_SPI(71)
+#define EXYNOS5_IRQ_USB3_DRD IRQ_SPI(72)
+#define EXYNOS5_IRQ_MIPI_HSI IRQ_SPI(73)
+#define EXYNOS5_IRQ_USB_HSOTG IRQ_SPI(74)
+#define EXYNOS5_IRQ_HSMMC0 IRQ_SPI(75)
+#define EXYNOS5_IRQ_HSMMC1 IRQ_SPI(76)
+#define EXYNOS5_IRQ_HSMMC2 IRQ_SPI(77)
+#define EXYNOS5_IRQ_HSMMC3 IRQ_SPI(78)
+#define EXYNOS5_IRQ_MIPICSI0 IRQ_SPI(79)
+#define EXYNOS5_IRQ_MIPICSI1 IRQ_SPI(80)
+#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT IRQ_SPI(81)
+#define EXYNOS5_IRQ_MIPIDSI0 IRQ_SPI(82)
+#define EXYNOS5_IRQ_ROTATOR IRQ_SPI(84)
+#define EXYNOS5_IRQ_GSC0 IRQ_SPI(85)
+#define EXYNOS5_IRQ_GSC1 IRQ_SPI(86)
+#define EXYNOS5_IRQ_GSC2 IRQ_SPI(87)
+#define EXYNOS5_IRQ_GSC3 IRQ_SPI(88)
+#define EXYNOS5_IRQ_JPEG IRQ_SPI(89)
+#define EXYNOS5_IRQ_EFNFCON_DMA IRQ_SPI(90)
+#define EXYNOS5_IRQ_2D IRQ_SPI(91)
+#define EXYNOS5_IRQ_SFMC0 IRQ_SPI(92)
+#define EXYNOS5_IRQ_SFMC1 IRQ_SPI(93)
+#define EXYNOS5_IRQ_MIXER IRQ_SPI(94)
+#define EXYNOS5_IRQ_HDMI IRQ_SPI(95)
+#define EXYNOS5_IRQ_MFC IRQ_SPI(96)
+#define EXYNOS5_IRQ_AUDIO_SS IRQ_SPI(97)
+#define EXYNOS5_IRQ_I2S0 IRQ_SPI(98)
+#define EXYNOS5_IRQ_I2S1 IRQ_SPI(99)
+#define EXYNOS5_IRQ_I2S2 IRQ_SPI(100)
+#define EXYNOS5_IRQ_AC97 IRQ_SPI(101)
+#define EXYNOS5_IRQ_PCM0 IRQ_SPI(102)
+#define EXYNOS5_IRQ_PCM1 IRQ_SPI(103)
+#define EXYNOS5_IRQ_PCM2 IRQ_SPI(104)
+#define EXYNOS5_IRQ_SPDIF IRQ_SPI(105)
+#define EXYNOS5_IRQ_ADC0 IRQ_SPI(106)
+
+#define EXYNOS5_IRQ_SATA_PHY IRQ_SPI(108)
+#define EXYNOS5_IRQ_SATA_PMEMREQ IRQ_SPI(109)
+#define EXYNOS5_IRQ_CAM_C IRQ_SPI(110)
+#define EXYNOS5_IRQ_EAGLE_PMU IRQ_SPI(111)
+#define EXYNOS5_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
+#define EXYNOS5_IRQ_DP1_INTP1 IRQ_SPI(113)
+#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
+#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
+#define EXYNOS5_IRQ_NFCON IRQ_SPI(116)
+
+#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
+#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
+#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
+#define EXYNOS5_IRQ_FIMC_LITE1 IRQ_SPI(126)
+#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127)
+
+#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2)
+#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(1, 6)
+
+#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0)
+#define EXYNOS5_IRQ_SYSMMU_GSC0_1 COMBINER_IRQ(2, 1)
+#define EXYNOS5_IRQ_SYSMMU_GSC1_0 COMBINER_IRQ(2, 2)
+#define EXYNOS5_IRQ_SYSMMU_GSC1_1 COMBINER_IRQ(2, 3)
+#define EXYNOS5_IRQ_SYSMMU_GSC2_0 COMBINER_IRQ(2, 4)
+#define EXYNOS5_IRQ_SYSMMU_GSC2_1 COMBINER_IRQ(2, 5)
+#define EXYNOS5_IRQ_SYSMMU_GSC3_0 COMBINER_IRQ(2, 6)
+#define EXYNOS5_IRQ_SYSMMU_GSC3_1 COMBINER_IRQ(2, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_FIMD1_0 COMBINER_IRQ(3, 2)
+#define EXYNOS5_IRQ_SYSMMU_FIMD1_1 COMBINER_IRQ(3, 3)
+#define EXYNOS5_IRQ_SYSMMU_LITE0_0 COMBINER_IRQ(3, 4)
+#define EXYNOS5_IRQ_SYSMMU_LITE0_1 COMBINER_IRQ(3, 5)
+#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_0 COMBINER_IRQ(3, 6)
+#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_1 COMBINER_IRQ(3, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(4, 0)
+#define EXYNOS5_IRQ_SYSMMU_ROTATOR_1 COMBINER_IRQ(4, 1)
+#define EXYNOS5_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 2)
+#define EXYNOS5_IRQ_SYSMMU_JPEG_1 COMBINER_IRQ(4, 3)
+
+#define EXYNOS5_IRQ_SYSMMU_FD_0 COMBINER_IRQ(5, 0)
+#define EXYNOS5_IRQ_SYSMMU_FD_1 COMBINER_IRQ(5, 1)
+#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_0 COMBINER_IRQ(5, 2)
+#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_1 COMBINER_IRQ(5, 3)
+#define EXYNOS5_IRQ_SYSMMU_MCUISP_0 COMBINER_IRQ(5, 4)
+#define EXYNOS5_IRQ_SYSMMU_MCUISP_1 COMBINER_IRQ(5, 5)
+#define EXYNOS5_IRQ_SYSMMU_3DNR_0 COMBINER_IRQ(5, 6)
+#define EXYNOS5_IRQ_SYSMMU_3DNR_1 COMBINER_IRQ(5, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_ARM_0 COMBINER_IRQ(6, 0)
+#define EXYNOS5_IRQ_SYSMMU_ARM_1 COMBINER_IRQ(6, 1)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(6, 2)
+#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(6, 3)
+#define EXYNOS5_IRQ_SYSMMU_RTIC_0 COMBINER_IRQ(6, 4)
+#define EXYNOS5_IRQ_SYSMMU_RTIC_1 COMBINER_IRQ(6, 5)
+#define EXYNOS5_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(6, 6)
+#define EXYNOS5_IRQ_SYSMMU_SSS_1 COMBINER_IRQ(6, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(7, 0)
+#define EXYNOS5_IRQ_SYSMMU_MDMA0_1 COMBINER_IRQ(7, 1)
+#define EXYNOS5_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(7, 2)
+#define EXYNOS5_IRQ_SYSMMU_MDMA1_1 COMBINER_IRQ(7, 3)
+#define EXYNOS5_IRQ_SYSMMU_TV_0 COMBINER_IRQ(7, 4)
+#define EXYNOS5_IRQ_SYSMMU_TV_1 COMBINER_IRQ(7, 5)
+#define EXYNOS5_IRQ_SYSMMU_GPSX_0 COMBINER_IRQ(7, 6)
+#define EXYNOS5_IRQ_SYSMMU_GPSX_1 COMBINER_IRQ(7, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(8, 5)
+#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(8, 6)
+
+#define EXYNOS5_IRQ_SYSMMU_DIS1_0 COMBINER_IRQ(9, 4)
+#define EXYNOS5_IRQ_SYSMMU_DIS1_1 COMBINER_IRQ(9, 5)
+
+#define EXYNOS5_IRQ_DP COMBINER_IRQ(10, 3)
+#define EXYNOS5_IRQ_SYSMMU_DIS0_0 COMBINER_IRQ(10, 4)
+#define EXYNOS5_IRQ_SYSMMU_DIS0_1 COMBINER_IRQ(10, 5)
+#define EXYNOS5_IRQ_SYSMMU_ISP_0 COMBINER_IRQ(10, 6)
+#define EXYNOS5_IRQ_SYSMMU_ISP_1 COMBINER_IRQ(10, 7)
+
+#define EXYNOS5_IRQ_SYSMMU_ODC_0 COMBINER_IRQ(11, 0)
+#define EXYNOS5_IRQ_SYSMMU_ODC_1 COMBINER_IRQ(11, 1)
+#define EXYNOS5_IRQ_SYSMMU_DRC_0 COMBINER_IRQ(11, 6)
+#define EXYNOS5_IRQ_SYSMMU_DRC_1 COMBINER_IRQ(11, 7)
+
+#define EXYNOS5_IRQ_FIMD1_FIFO COMBINER_IRQ(18, 4)
+#define EXYNOS5_IRQ_FIMD1_VSYNC COMBINER_IRQ(18, 5)
+#define EXYNOS5_IRQ_FIMD1_SYSTEM COMBINER_IRQ(18, 6)
+
+#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
+#define EXYNOS5_IRQ_MCT_L0 COMBINER_IRQ(23, 1)
+#define EXYNOS5_IRQ_MCT_L1 COMBINER_IRQ(23, 2)
+#define EXYNOS5_IRQ_MCT_G0 COMBINER_IRQ(23, 3)
+#define EXYNOS5_IRQ_MCT_G1 COMBINER_IRQ(23, 4)
+#define EXYNOS5_IRQ_MCT_G2 COMBINER_IRQ(23, 5)
+#define EXYNOS5_IRQ_MCT_G3 COMBINER_IRQ(23, 6)
+
+#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
+#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
+#define EXYNOS5_IRQ_SYSMMU_LITE1_1 COMBINER_IRQ(24, 2)
+#define EXYNOS5_IRQ_SYSMMU_2D_0 COMBINER_IRQ(24, 5)
+#define EXYNOS5_IRQ_SYSMMU_2D_1 COMBINER_IRQ(24, 6)
+
+#define EXYNOS5_IRQ_EINT2 COMBINER_IRQ(25, 0)
+#define EXYNOS5_IRQ_EINT3 COMBINER_IRQ(25, 1)
+
+#define EXYNOS5_IRQ_EINT4 COMBINER_IRQ(26, 0)
+#define EXYNOS5_IRQ_EINT5 COMBINER_IRQ(26, 1)
+
+#define EXYNOS5_IRQ_EINT6 COMBINER_IRQ(27, 0)
+#define EXYNOS5_IRQ_EINT7 COMBINER_IRQ(27, 1)
+
+#define EXYNOS5_IRQ_EINT8 COMBINER_IRQ(28, 0)
+#define EXYNOS5_IRQ_EINT9 COMBINER_IRQ(28, 1)
+
+#define EXYNOS5_IRQ_EINT10 COMBINER_IRQ(29, 0)
+#define EXYNOS5_IRQ_EINT11 COMBINER_IRQ(29, 1)
+
+#define EXYNOS5_IRQ_EINT12 COMBINER_IRQ(30, 0)
+#define EXYNOS5_IRQ_EINT13 COMBINER_IRQ(30, 1)
+
+#define EXYNOS5_IRQ_EINT14 COMBINER_IRQ(31, 0)
+#define EXYNOS5_IRQ_EINT15 COMBINER_IRQ(31, 1)
+
+#define EXYNOS5_MAX_COMBINER_NR 32
+
+#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 13
+#define EXYNOS5_IRQ_GPIO2_NR_GROUPS 9
+#define EXYNOS5_IRQ_GPIO3_NR_GROUPS 5
+#define EXYNOS5_IRQ_GPIO4_NR_GROUPS 1
+
+#define MAX_COMBINER_NR (EXYNOS4_MAX_COMBINER_NR > EXYNOS5_MAX_COMBINER_NR ? \
+ EXYNOS4_MAX_COMBINER_NR : EXYNOS5_MAX_COMBINER_NR)
+
+#define S5P_EINT_BASE1 COMBINER_IRQ(MAX_COMBINER_NR, 0)
+#define S5P_EINT_BASE2 (S5P_EINT_BASE1 + 16)
+#define S5P_GPIOINT_BASE (S5P_EINT_BASE1 + 32)
+#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
+#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
+
+/* Set the default NR_IRQS */
+
+#define NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/mct.c b/arch/arm/mach-exynos/mct.c
index 85b5527..1016515 100644
--- a/arch/arm/mach-exynos/mct.c
+++ b/arch/arm/mach-exynos/mct.c
@@ -258,7 +258,10 @@ static void exynos4_clockevent_init(void)
mct_comp_device.cpumask = cpumask_of(0);
clockevents_register_device(&mct_comp_device);
- setup_irq(IRQ_MCT_G0, &mct_comp_event_irq);
+ if (soc_is_exynos5250())
+ setup_irq(EXYNOS5_IRQ_MCT_G0, &mct_comp_event_irq);
+ else
+ setup_irq(EXYNOS4_IRQ_MCT_G0, &mct_comp_event_irq);
}
#ifdef CONFIG_LOCAL_TIMERS
@@ -406,16 +409,16 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt)
if (mct_int_type == MCT_INT_SPI) {
if (cpu == 0) {
mct_tick0_event_irq.dev_id = mevt;
- evt->irq = IRQ_MCT_L0;
- setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq);
+ evt->irq = EXYNOS4_IRQ_MCT_L0;
+ setup_irq(EXYNOS4_IRQ_MCT_L0, &mct_tick0_event_irq);
} else {
mct_tick1_event_irq.dev_id = mevt;
- evt->irq = IRQ_MCT_L1;
- setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq);
- irq_set_affinity(IRQ_MCT_L1, cpumask_of(1));
+ evt->irq = EXYNOS4_IRQ_MCT_L1;
+ setup_irq(EXYNOS4_IRQ_MCT_L1, &mct_tick1_event_irq);
+ irq_set_affinity(EXYNOS4_IRQ_MCT_L1, cpumask_of(1));
}
} else {
- enable_percpu_irq(IRQ_MCT_LOCALTIMER, 0);
+ enable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER, 0);
}
}
@@ -437,7 +440,7 @@ void local_timer_stop(struct clock_event_device *evt)
else
remove_irq(evt->irq, &mct_tick1_event_irq);
else
- disable_percpu_irq(IRQ_MCT_LOCALTIMER);
+ disable_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER);
}
#endif /* CONFIG_LOCAL_TIMERS */
@@ -452,11 +455,11 @@ static void __init exynos4_timer_resources(void)
if (mct_int_type == MCT_INT_PPI) {
int err;
- err = request_percpu_irq(IRQ_MCT_LOCALTIMER,
+ err = request_percpu_irq(EXYNOS_IRQ_MCT_LOCALTIMER,
exynos4_mct_tick_isr, "MCT",
&percpu_mct_tick);
WARN(err, "MCT: can't request IRQ %d (%d)\n",
- IRQ_MCT_LOCALTIMER, err);
+ EXYNOS_IRQ_MCT_LOCALTIMER, err);
}
#endif /* CONFIG_LOCAL_TIMERS */
}
diff --git a/arch/arm/plat-s5p/irq-pm.c b/arch/arm/plat-s5p/irq-pm.c
index 327acb3..d1bfeca 100644
--- a/arch/arm/plat-s5p/irq-pm.c
+++ b/arch/arm/plat-s5p/irq-pm.c
@@ -39,19 +39,32 @@ unsigned long s3c_irqwake_eintallow = 0xffffffffL;
int s3c_irq_wake(struct irq_data *data, unsigned int state)
{
unsigned long irqbit;
+ unsigned int irq_rtc_tic, irq_rtc_alarm;
+
+#ifdef CONFIG_ARCH_EXYNOS
+ if (soc_is_exynos5250()) {
+ irq_rtc_tic = EXYNOS5_IRQ_RTC_TIC;
+ irq_rtc_alarm = EXYNOS5_IRQ_RTC_ALARM;
+ } else {
+ irq_rtc_tic = EXYNOS4_IRQ_RTC_TIC;
+ irq_rtc_alarm = EXYNOS4_IRQ_RTC_ALARM;
+ }
+#else
+ irq_rtc_tic = IRQ_RTC_TIC;
+ irq_rtc_alarm = IRQ_RTC_ALARM;
+#endif
+
+ if (data->irq == irq_rtc_tic || data->irq == irq_rtc_alarm) {
+ irqbit = 1 << (data->irq + 1 - irq_rtc_alarm);
- switch (data->irq) {
- case IRQ_RTC_TIC:
- case IRQ_RTC_ALARM:
- irqbit = 1 << (data->irq + 1 - IRQ_RTC_ALARM);
if (!state)
s3c_irqwake_intmask |= irqbit;
else
s3c_irqwake_intmask &= ~irqbit;
- break;
- default:
+ } else {
return -ENOENT;
}
+
return 0;
}
diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c
index 51583cd..f980cf3 100644
--- a/arch/arm/plat-samsung/irq-vic-timer.c
+++ b/arch/arm/plat-samsung/irq-vic-timer.c
@@ -19,6 +19,7 @@
#include <linux/io.h>
#include <mach/map.h>
+#include <plat/cpu.h>
#include <plat/irq-vic-timer.h>
#include <plat/regs-timer.h>
@@ -57,6 +58,21 @@ void __init s3c_init_vic_timer_irq(unsigned int num, unsigned int timer_irq)
struct irq_chip_type *ct;
unsigned int i;
+#ifdef CONFIG_ARCH_EXYNOS
+ if (soc_is_exynos5250()) {
+ pirq[0] = EXYNOS5_IRQ_TIMER0_VIC;
+ pirq[1] = EXYNOS5_IRQ_TIMER1_VIC;
+ pirq[2] = EXYNOS5_IRQ_TIMER2_VIC;
+ pirq[3] = EXYNOS5_IRQ_TIMER3_VIC;
+ pirq[4] = EXYNOS5_IRQ_TIMER4_VIC;
+ } else {
+ pirq[0] = EXYNOS4_IRQ_TIMER0_VIC;
+ pirq[1] = EXYNOS4_IRQ_TIMER1_VIC;
+ pirq[2] = EXYNOS4_IRQ_TIMER2_VIC;
+ pirq[3] = EXYNOS4_IRQ_TIMER3_VIC;
+ pirq[4] = EXYNOS4_IRQ_TIMER4_VIC;
+ }
+#endif
s3c_tgc = irq_alloc_generic_chip("s3c-timer", 1, timer_irq,
S3C64XX_TINT_CSTAT, handle_level_irq);
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v4 08/12] ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: arnd, olof, Eunki Kim, Kukjin Kim
From: Eunki Kim <eunki_kim@samsung.com>
The GPIOs of EXYNOS4 and EXYNOS5 are changed to use
ioremap instead of static mapping. It alse causes the
change of external interrupt IO mapping. This patch
changes EXYNOS4 to EXYNOS for common use and changes
EINT_x macros for supporting dynamic IO mapping.
Signed-off-by: Eunki Kim <eunki_kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/common.c | 147 ++++++++++++++++---------
arch/arm/mach-exynos/include/mach/regs-gpio.h | 20 ++--
2 files changed, 105 insertions(+), 62 deletions(-)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 4ef0cb5..cbbaca5 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -665,10 +665,60 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
}
+static void __iomem *exynos_eint_base;
+
static DEFINE_SPINLOCK(eint_lock);
static unsigned int eint0_15_data[16];
+static inline int exynos4_irq_to_gpio(unsigned int irq)
+{
+ if (irq < IRQ_EINT(0))
+ return -EINVAL;
+
+ irq -= IRQ_EINT(0);
+ if (irq < 8)
+ return EXYNOS4_GPX0(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS4_GPX1(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS4_GPX2(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS4_GPX3(irq);
+
+ return -EINVAL;
+}
+
+static inline int exynos5_irq_to_gpio(unsigned int irq)
+{
+ if (irq < IRQ_EINT(0))
+ return -EINVAL;
+
+ irq -= IRQ_EINT(0);
+ if (irq < 8)
+ return EXYNOS5_GPX0(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS5_GPX1(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS5_GPX2(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS5_GPX3(irq);
+
+ return -EINVAL;
+}
+
static unsigned int exynos4_eint0_15_src_int[16] = {
EXYNOS4_IRQ_EINT0,
EXYNOS4_IRQ_EINT1,
@@ -706,41 +756,41 @@ static unsigned int exynos5_eint0_15_src_int[16] = {
EXYNOS5_IRQ_EINT14,
EXYNOS5_IRQ_EINT15,
};
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
+static inline void exynos_irq_eint_mask(struct irq_data *data)
{
u32 mask;
spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask |= eint_irq_to_bit(data->irq);
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
+ mask |= EINT_OFFSET_BIT(data->irq);
+ __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
spin_unlock(&eint_lock);
}
-static void exynos4_irq_eint_unmask(struct irq_data *data)
+static void exynos_irq_eint_unmask(struct irq_data *data)
{
u32 mask;
spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask &= ~(eint_irq_to_bit(data->irq));
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
+ mask &= ~(EINT_OFFSET_BIT(data->irq));
+ __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
spin_unlock(&eint_lock);
}
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
+static inline void exynos_irq_eint_ack(struct irq_data *data)
{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+ __raw_writel(EINT_OFFSET_BIT(data->irq),
+ EINT_PEND(exynos_eint_base, data->irq));
}
-static void exynos4_irq_eint_maskack(struct irq_data *data)
+static void exynos_irq_eint_maskack(struct irq_data *data)
{
- exynos4_irq_eint_mask(data);
- exynos4_irq_eint_ack(data);
+ exynos_irq_eint_mask(data);
+ exynos_irq_eint_ack(data);
}
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type)
{
int offs = EINT_OFFSET(data->irq);
int shift;
@@ -777,39 +827,27 @@ static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
mask = 0x7 << shift;
spin_lock(&eint_lock);
- ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq));
ctrl &= ~mask;
ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ __raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq));
spin_unlock(&eint_lock);
- switch (offs) {
- case 0 ... 7:
- s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
- break;
- case 8 ... 15:
- s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
- break;
- case 16 ... 23:
- s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
- break;
- case 24 ... 31:
- s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
- break;
- default:
- printk(KERN_ERR "No such irq number %d", offs);
- }
+ if (soc_is_exynos5250())
+ s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
+ else
+ s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
return 0;
}
-static struct irq_chip exynos4_irq_eint = {
- .name = "exynos4-eint",
- .irq_mask = exynos4_irq_eint_mask,
- .irq_unmask = exynos4_irq_eint_unmask,
- .irq_mask_ack = exynos4_irq_eint_maskack,
- .irq_ack = exynos4_irq_eint_ack,
- .irq_set_type = exynos4_irq_eint_set_type,
+static struct irq_chip exynos_irq_eint = {
+ .name = "exynos-eint",
+ .irq_mask = exynos_irq_eint_mask,
+ .irq_unmask = exynos_irq_eint_unmask,
+ .irq_mask_ack = exynos_irq_eint_maskack,
+ .irq_ack = exynos_irq_eint_ack,
+ .irq_set_type = exynos_irq_eint_set_type,
#ifdef CONFIG_PM
.irq_set_wake = s3c_irqext_wake,
#endif
@@ -824,12 +862,12 @@ static struct irq_chip exynos4_irq_eint = {
*
* Each EINT pend/mask registers handle eight of them.
*/
-static inline void exynos4_irq_demux_eint(unsigned int start)
+static inline void exynos_irq_demux_eint(unsigned int start)
{
unsigned int irq;
- u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
- u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+ u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start));
+ u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start));
status &= ~mask;
status &= 0xff;
@@ -841,12 +879,12 @@ static inline void exynos4_irq_demux_eint(unsigned int start)
}
}
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
chained_irq_enter(chip, desc);
- exynos4_irq_demux_eint(IRQ_EINT(16));
- exynos4_irq_demux_eint(IRQ_EINT(24));
+ exynos_irq_demux_eint(IRQ_EINT(16));
+ exynos_irq_demux_eint(IRQ_EINT(24));
chained_irq_exit(chip, desc);
}
@@ -867,20 +905,27 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static int __init exynos4_init_irq_eint(void)
+static int __init exynos_init_irq_eint(void)
{
int irq;
if (soc_is_exynos5250())
- return 0;
+ exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
+ else
+ exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
+
+ if (exynos_eint_base == NULL) {
+ pr_err("unable to ioremap for EINT base address\n");
+ return -ENOMEM;
+ }
for (irq = 0 ; irq <= 31 ; irq++) {
- irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+ irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint,
handle_level_irq);
set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
}
- irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+ irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31);
for (irq = 0 ; irq <= 15 ; irq++) {
eint0_15_data[irq] = IRQ_EINT(irq);
@@ -900,4 +945,4 @@ static int __init exynos4_init_irq_eint(void)
return 0;
}
-arch_initcall(exynos4_init_irq_eint);
+arch_initcall(exynos_init_irq_eint);
diff --git a/arch/arm/mach-exynos/include/mach/regs-gpio.h b/arch/arm/mach-exynos/include/mach/regs-gpio.h
index 1401b21..e4b5b60 100644
--- a/arch/arm/mach-exynos/include/mach/regs-gpio.h
+++ b/arch/arm/mach-exynos/include/mach/regs-gpio.h
@@ -16,6 +16,15 @@
#include <mach/map.h>
#include <mach/irqs.h>
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
+#define EINT_CON(b, x) (b + 0xE00 + (EINT_REG_NR(x) * 4))
+#define EINT_FLTCON(b, x) (b + 0xE80 + (EINT_REG_NR(x) * 4))
+#define EINT_MASK(b, x) (b + 0xF00 + (EINT_REG_NR(x) * 4))
+#define EINT_PEND(b, x) (b + 0xF40 + (EINT_REG_NR(x) * 4))
+
+#define EINT_OFFSET_BIT(x) (1 << (EINT_OFFSET(x) & 0x7))
+
+/* compatibility for plat-s5p/irq-pm.c */
#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00)
#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4))
@@ -28,15 +37,4 @@
#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40)
#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4))
-#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE S3C_GPIO_SFN(0xf)
-
-#define EINT_GPIO_0(x) EXYNOS4_GPX0(x)
-#define EINT_GPIO_1(x) EXYNOS4_GPX1(x)
-#define EINT_GPIO_2(x) EXYNOS4_GPX2(x)
-#define EINT_GPIO_3(x) EXYNOS4_GPX3(x)
-
#endif /* __ASM_ARCH_REGS_GPIO_H */
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 08/12] ARM: EXYNOS: support EINT for EXYNOS4 and EXYNOS5
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
From: Eunki Kim <eunki_kim@samsung.com>
The GPIOs of EXYNOS4 and EXYNOS5 are changed to use
ioremap instead of static mapping. It alse causes the
change of external interrupt IO mapping. This patch
changes EXYNOS4 to EXYNOS for common use and changes
EINT_x macros for supporting dynamic IO mapping.
Signed-off-by: Eunki Kim <eunki_kim@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/common.c | 147 ++++++++++++++++---------
arch/arm/mach-exynos/include/mach/regs-gpio.h | 20 ++--
2 files changed, 105 insertions(+), 62 deletions(-)
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 4ef0cb5..cbbaca5 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -665,10 +665,60 @@ static void __init exynos_init_uarts(struct s3c2410_uartcfg *cfg, int no)
s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
}
+static void __iomem *exynos_eint_base;
+
static DEFINE_SPINLOCK(eint_lock);
static unsigned int eint0_15_data[16];
+static inline int exynos4_irq_to_gpio(unsigned int irq)
+{
+ if (irq < IRQ_EINT(0))
+ return -EINVAL;
+
+ irq -= IRQ_EINT(0);
+ if (irq < 8)
+ return EXYNOS4_GPX0(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS4_GPX1(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS4_GPX2(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS4_GPX3(irq);
+
+ return -EINVAL;
+}
+
+static inline int exynos5_irq_to_gpio(unsigned int irq)
+{
+ if (irq < IRQ_EINT(0))
+ return -EINVAL;
+
+ irq -= IRQ_EINT(0);
+ if (irq < 8)
+ return EXYNOS5_GPX0(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS5_GPX1(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS5_GPX2(irq);
+
+ irq -= 8;
+ if (irq < 8)
+ return EXYNOS5_GPX3(irq);
+
+ return -EINVAL;
+}
+
static unsigned int exynos4_eint0_15_src_int[16] = {
EXYNOS4_IRQ_EINT0,
EXYNOS4_IRQ_EINT1,
@@ -706,41 +756,41 @@ static unsigned int exynos5_eint0_15_src_int[16] = {
EXYNOS5_IRQ_EINT14,
EXYNOS5_IRQ_EINT15,
};
-static inline void exynos4_irq_eint_mask(struct irq_data *data)
+static inline void exynos_irq_eint_mask(struct irq_data *data)
{
u32 mask;
spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask |= eint_irq_to_bit(data->irq);
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
+ mask |= EINT_OFFSET_BIT(data->irq);
+ __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
spin_unlock(&eint_lock);
}
-static void exynos4_irq_eint_unmask(struct irq_data *data)
+static void exynos_irq_eint_unmask(struct irq_data *data)
{
u32 mask;
spin_lock(&eint_lock);
- mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(data->irq)));
- mask &= ~(eint_irq_to_bit(data->irq));
- __raw_writel(mask, S5P_EINT_MASK(EINT_REG_NR(data->irq)));
+ mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
+ mask &= ~(EINT_OFFSET_BIT(data->irq));
+ __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
spin_unlock(&eint_lock);
}
-static inline void exynos4_irq_eint_ack(struct irq_data *data)
+static inline void exynos_irq_eint_ack(struct irq_data *data)
{
- __raw_writel(eint_irq_to_bit(data->irq),
- S5P_EINT_PEND(EINT_REG_NR(data->irq)));
+ __raw_writel(EINT_OFFSET_BIT(data->irq),
+ EINT_PEND(exynos_eint_base, data->irq));
}
-static void exynos4_irq_eint_maskack(struct irq_data *data)
+static void exynos_irq_eint_maskack(struct irq_data *data)
{
- exynos4_irq_eint_mask(data);
- exynos4_irq_eint_ack(data);
+ exynos_irq_eint_mask(data);
+ exynos_irq_eint_ack(data);
}
-static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
+static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type)
{
int offs = EINT_OFFSET(data->irq);
int shift;
@@ -777,39 +827,27 @@ static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
mask = 0x7 << shift;
spin_lock(&eint_lock);
- ctrl = __raw_readl(S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq));
ctrl &= ~mask;
ctrl |= newvalue << shift;
- __raw_writel(ctrl, S5P_EINT_CON(EINT_REG_NR(data->irq)));
+ __raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq));
spin_unlock(&eint_lock);
- switch (offs) {
- case 0 ... 7:
- s3c_gpio_cfgpin(EINT_GPIO_0(offs & 0x7), EINT_MODE);
- break;
- case 8 ... 15:
- s3c_gpio_cfgpin(EINT_GPIO_1(offs & 0x7), EINT_MODE);
- break;
- case 16 ... 23:
- s3c_gpio_cfgpin(EINT_GPIO_2(offs & 0x7), EINT_MODE);
- break;
- case 24 ... 31:
- s3c_gpio_cfgpin(EINT_GPIO_3(offs & 0x7), EINT_MODE);
- break;
- default:
- printk(KERN_ERR "No such irq number %d", offs);
- }
+ if (soc_is_exynos5250())
+ s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
+ else
+ s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
return 0;
}
-static struct irq_chip exynos4_irq_eint = {
- .name = "exynos4-eint",
- .irq_mask = exynos4_irq_eint_mask,
- .irq_unmask = exynos4_irq_eint_unmask,
- .irq_mask_ack = exynos4_irq_eint_maskack,
- .irq_ack = exynos4_irq_eint_ack,
- .irq_set_type = exynos4_irq_eint_set_type,
+static struct irq_chip exynos_irq_eint = {
+ .name = "exynos-eint",
+ .irq_mask = exynos_irq_eint_mask,
+ .irq_unmask = exynos_irq_eint_unmask,
+ .irq_mask_ack = exynos_irq_eint_maskack,
+ .irq_ack = exynos_irq_eint_ack,
+ .irq_set_type = exynos_irq_eint_set_type,
#ifdef CONFIG_PM
.irq_set_wake = s3c_irqext_wake,
#endif
@@ -824,12 +862,12 @@ static struct irq_chip exynos4_irq_eint = {
*
* Each EINT pend/mask registers handle eight of them.
*/
-static inline void exynos4_irq_demux_eint(unsigned int start)
+static inline void exynos_irq_demux_eint(unsigned int start)
{
unsigned int irq;
- u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start)));
- u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start)));
+ u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start));
+ u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start));
status &= ~mask;
status &= 0xff;
@@ -841,12 +879,12 @@ static inline void exynos4_irq_demux_eint(unsigned int start)
}
}
-static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
chained_irq_enter(chip, desc);
- exynos4_irq_demux_eint(IRQ_EINT(16));
- exynos4_irq_demux_eint(IRQ_EINT(24));
+ exynos_irq_demux_eint(IRQ_EINT(16));
+ exynos_irq_demux_eint(IRQ_EINT(24));
chained_irq_exit(chip, desc);
}
@@ -867,20 +905,27 @@ static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
chained_irq_exit(chip, desc);
}
-static int __init exynos4_init_irq_eint(void)
+static int __init exynos_init_irq_eint(void)
{
int irq;
if (soc_is_exynos5250())
- return 0;
+ exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
+ else
+ exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
+
+ if (exynos_eint_base == NULL) {
+ pr_err("unable to ioremap for EINT base address\n");
+ return -ENOMEM;
+ }
for (irq = 0 ; irq <= 31 ; irq++) {
- irq_set_chip_and_handler(IRQ_EINT(irq), &exynos4_irq_eint,
+ irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint,
handle_level_irq);
set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
}
- irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
+ irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31);
for (irq = 0 ; irq <= 15 ; irq++) {
eint0_15_data[irq] = IRQ_EINT(irq);
@@ -900,4 +945,4 @@ static int __init exynos4_init_irq_eint(void)
return 0;
}
-arch_initcall(exynos4_init_irq_eint);
+arch_initcall(exynos_init_irq_eint);
diff --git a/arch/arm/mach-exynos/include/mach/regs-gpio.h b/arch/arm/mach-exynos/include/mach/regs-gpio.h
index 1401b21..e4b5b60 100644
--- a/arch/arm/mach-exynos/include/mach/regs-gpio.h
+++ b/arch/arm/mach-exynos/include/mach/regs-gpio.h
@@ -16,6 +16,15 @@
#include <mach/map.h>
#include <mach/irqs.h>
+#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
+#define EINT_CON(b, x) (b + 0xE00 + (EINT_REG_NR(x) * 4))
+#define EINT_FLTCON(b, x) (b + 0xE80 + (EINT_REG_NR(x) * 4))
+#define EINT_MASK(b, x) (b + 0xF00 + (EINT_REG_NR(x) * 4))
+#define EINT_PEND(b, x) (b + 0xF40 + (EINT_REG_NR(x) * 4))
+
+#define EINT_OFFSET_BIT(x) (1 << (EINT_OFFSET(x) & 0x7))
+
+/* compatibility for plat-s5p/irq-pm.c */
#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00)
#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4))
@@ -28,15 +37,4 @@
#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40)
#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4))
-#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-
-#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7))
-
-#define EINT_MODE S3C_GPIO_SFN(0xf)
-
-#define EINT_GPIO_0(x) EXYNOS4_GPX0(x)
-#define EINT_GPIO_1(x) EXYNOS4_GPX1(x)
-#define EINT_GPIO_2(x) EXYNOS4_GPX2(x)
-#define EINT_GPIO_3(x) EXYNOS4_GPX3(x)
-
#endif /* __ASM_ARCH_REGS_GPIO_H */
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v4 09/12] ARM: EXYNOS: add support get_core_count() for EXYNOS5250
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: arnd, olof, Kukjin Kim
The EXYNOS5250 has two Cortex-A15 cores and there's no
need to call scu_enable() in platform_smp_prepare_cpus()
because Cortex-A15 has no regarding scu register which
can be used for getting number of cores.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/platsmp.c | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 0f2035a..36c3984 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -166,7 +166,10 @@ void __init smp_init_cpus(void)
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
- ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+ if (soc_is_exynos5250())
+ ncores = 2;
+ else
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
if (ncores > nr_cpu_ids) {
@@ -183,8 +186,8 @@ void __init smp_init_cpus(void)
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
-
- scu_enable(scu_base_addr());
+ if (!soc_is_exynos5250())
+ scu_enable(scu_base_addr());
/*
* Write the address of secondary startup into the
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 09/12] ARM: EXYNOS: add support get_core_count() for EXYNOS5250
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
The EXYNOS5250 has two Cortex-A15 cores and there's no
need to call scu_enable() in platform_smp_prepare_cpus()
because Cortex-A15 has no regarding scu register which
can be used for getting number of cores.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/platsmp.c | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 0f2035a..36c3984 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -166,7 +166,10 @@ void __init smp_init_cpus(void)
void __iomem *scu_base = scu_base_addr();
unsigned int i, ncores;
- ncores = scu_base ? scu_get_core_count(scu_base) : 1;
+ if (soc_is_exynos5250())
+ ncores = 2;
+ else
+ ncores = scu_base ? scu_get_core_count(scu_base) : 1;
/* sanity check */
if (ncores > nr_cpu_ids) {
@@ -183,8 +186,8 @@ void __init smp_init_cpus(void)
void __init platform_smp_prepare_cpus(unsigned int max_cpus)
{
-
- scu_enable(scu_base_addr());
+ if (!soc_is_exynos5250())
+ scu_enable(scu_base_addr());
/*
* Write the address of secondary startup into the
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v4 10/12] ARM: EXYNOS: add support ARCH_EXYNOS5 for EXYNOS5 SoCs
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc; +Cc: arnd, olof, Kukjin Kim
This patch adds CONFIG_ARCH_EXYNOS5 and CONFIG_SOC_EXYNOS5250
for supporting EXYNOS5250 SoC and allows supporting EXYNOS4
and EXYNOS5 together.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/Kconfig | 18 +++++++++++++-----
arch/arm/mach-exynos/Makefile | 1 +
2 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 5e0a456..a2ed05c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -11,18 +11,19 @@ if ARCH_EXYNOS
menu "SAMSUNG EXYNOS SoCs Support"
-choice
- prompt "EXYNOS System Type"
- default ARCH_EXYNOS4
-
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
+ default y
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
Samsung EXYNOS4 SoCs based systems
-endchoice
+config ARCH_EXYNOS5
+ bool "SAMSUNG EXYNOS5"
+ select HAVE_SMP
+ help
+ Samsung EXYNOS5 (Cortex-A15) SoC based systems
comment "EXYNOS SoCs"
@@ -55,6 +56,13 @@ config SOC_EXYNOS4412
help
Enable EXYNOS4412 SoC support
+config SOC_EXYNOS5250
+ bool "SAMSUNG EXYNOS5250"
+ default y
+ depends on ARCH_EXYNOS5
+ help
+ Enable EXYNOS5250 SoC support
+
config EXYNOS4_MCT
bool
default y
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index f8a3770..7214092 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -14,6 +14,7 @@ obj- :=
obj-$(CONFIG_ARCH_EXYNOS) += common.o
obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o
+obj-$(CONFIG_ARCH_EXYNOS5) += clock-exynos5.o
obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v4 10/12] ARM: EXYNOS: add support ARCH_EXYNOS5 for EXYNOS5 SoCs
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds CONFIG_ARCH_EXYNOS5 and CONFIG_SOC_EXYNOS5250
for supporting EXYNOS5250 SoC and allows supporting EXYNOS4
and EXYNOS5 together.
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/Kconfig | 18 +++++++++++++-----
arch/arm/mach-exynos/Makefile | 1 +
2 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index 5e0a456..a2ed05c 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -11,18 +11,19 @@ if ARCH_EXYNOS
menu "SAMSUNG EXYNOS SoCs Support"
-choice
- prompt "EXYNOS System Type"
- default ARCH_EXYNOS4
-
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
+ default y
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
help
Samsung EXYNOS4 SoCs based systems
-endchoice
+config ARCH_EXYNOS5
+ bool "SAMSUNG EXYNOS5"
+ select HAVE_SMP
+ help
+ Samsung EXYNOS5 (Cortex-A15) SoC based systems
comment "EXYNOS SoCs"
@@ -55,6 +56,13 @@ config SOC_EXYNOS4412
help
Enable EXYNOS4412 SoC support
+config SOC_EXYNOS5250
+ bool "SAMSUNG EXYNOS5250"
+ default y
+ depends on ARCH_EXYNOS5
+ help
+ Enable EXYNOS5250 SoC support
+
config EXYNOS4_MCT
bool
default y
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index f8a3770..7214092 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -14,6 +14,7 @@ obj- :=
obj-$(CONFIG_ARCH_EXYNOS) += common.o
obj-$(CONFIG_ARCH_EXYNOS4) += clock-exynos4.o
+obj-$(CONFIG_ARCH_EXYNOS5) += clock-exynos5.o
obj-$(CONFIG_CPU_EXYNOS4210) += clock-exynos4210.o
obj-$(CONFIG_SOC_EXYNOS4212) += clock-exynos4212.o
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* [PATCH v4 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc
Cc: arnd, olof, Kukjin Kim, Thomas Abraham, Grant Likely
This patch adds a new EXYNOS5 compatible device tree enabled board
When using this, a corresponding device tree blob which describes the
board's properties should be supplied at boot time to the kernel.
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/Kconfig | 22 +++++++++-
arch/arm/mach-exynos/Makefile | 1 +
arch/arm/mach-exynos/mach-exynos5-dt.c | 78 ++++++++++++++++++++++++++++++++
3 files changed, 100 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-exynos/mach-exynos5-dt.c
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index a2ed05c..ac24386 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -362,7 +362,18 @@ config MACH_SMDK4412
Machine support for Samsung SMDK4412
endif
-comment "Flattened Device Tree based board for Exynos4 based SoC"
+if ARCH_EXYNOS5
+
+comment "EXYNOS5250 Boards"
+
+config MACH_SMDK5250
+ bool "SMDK5250"
+ select SOC_EXYNOS5250
+ help
+ Machine support for Samsung SMDK5250
+endif
+
+comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
@@ -376,6 +387,15 @@ config MACH_EXYNOS4_DT
Note: This is under development and not all peripherals can be supported
with this machine file.
+config MACH_EXYNOS5_DT
+ bool "SAMSUNG EXYNOS5 Machine using device tree"
+ select SOC_EXYNOS5250
+ select USE_OF
+ select ARM_AMBA
+ help
+ Machine support for Samsung Exynos4 machine with device tree enabled.
+ Select this if a fdt blob is available for the EXYNOS4 SoC based board.
+
if ARCH_EXYNOS4
comment "Configuration for HSMMC 8-bit bus width"
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 7214092..29967ef 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
+obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
# device support
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
new file mode 100644
index 0000000..0d26f50
--- /dev/null
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -0,0 +1,78 @@
+/*
+ * SAMSUNG EXYNOS5250 Flattened Device Tree enabled machine
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+/*
+ * The following lookup table is used to override device names when devices
+ * are registered from device tree. This is temporarily added to enable
+ * device tree support addition for the EXYNOS5 architecture.
+ *
+ * For drivers that require platform data to be provided from the machine
+ * file, a platform data pointer can also be supplied along with the
+ * devices names. Usually, the platform data elements that cannot be parsed
+ * from the device tree by the drivers (example: function pointers) are
+ * supplied. But it should be noted that this is a temporary mechanism and
+ * at some point, the drivers should be capable of parsing all the platform
+ * data from the device tree.
+ */
+static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0,
+ "exynos4210-uart.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1,
+ "exynos4210-uart.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2,
+ "exynos4210-uart.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
+ "exynos4210-uart.3", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL),
+ {},
+};
+
+static void __init exynos5250_dt_map_io(void)
+{
+ exynos_init_io(NULL, 0);
+ s3c24xx_init_clocks(24000000);
+}
+
+static void __init exynos5250_dt_machine_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ exynos5250_auxdata_lookup, NULL);
+}
+
+static char const *exynos5250_dt_compat[] __initdata = {
+ "samsung,exynos5250",
+ NULL
+};
+
+DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .init_irq = exynos5_init_irq,
+ .map_io = exynos5250_dt_map_io,
+ .handle_irq = gic_handle_irq,
+ .init_machine = exynos5250_dt_machine_init,
+ .timer = &exynos4_timer,
+ .dt_compat = exynos5250_dt_compat,
+ .restart = exynos5_restart,
+MACHINE_END
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds a new EXYNOS5 compatible device tree enabled board
When using this, a corresponding device tree blob which describes the
board's properties should be supplied at boot time to the kernel.
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/mach-exynos/Kconfig | 22 +++++++++-
arch/arm/mach-exynos/Makefile | 1 +
arch/arm/mach-exynos/mach-exynos5-dt.c | 78 ++++++++++++++++++++++++++++++++
3 files changed, 100 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-exynos/mach-exynos5-dt.c
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index a2ed05c..ac24386 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -362,7 +362,18 @@ config MACH_SMDK4412
Machine support for Samsung SMDK4412
endif
-comment "Flattened Device Tree based board for Exynos4 based SoC"
+if ARCH_EXYNOS5
+
+comment "EXYNOS5250 Boards"
+
+config MACH_SMDK5250
+ bool "SMDK5250"
+ select SOC_EXYNOS5250
+ help
+ Machine support for Samsung SMDK5250
+endif
+
+comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
@@ -376,6 +387,15 @@ config MACH_EXYNOS4_DT
Note: This is under development and not all peripherals can be supported
with this machine file.
+config MACH_EXYNOS5_DT
+ bool "SAMSUNG EXYNOS5 Machine using device tree"
+ select SOC_EXYNOS5250
+ select USE_OF
+ select ARM_AMBA
+ help
+ Machine support for Samsung Exynos4 machine with device tree enabled.
+ Select this if a fdt blob is available for the EXYNOS4 SoC based board.
+
if ARCH_EXYNOS4
comment "Configuration for HSMMC 8-bit bus width"
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index 7214092..29967ef 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
+obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
# device support
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
new file mode 100644
index 0000000..0d26f50
--- /dev/null
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -0,0 +1,78 @@
+/*
+ * SAMSUNG EXYNOS5250 Flattened Device Tree enabled machine
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/of_platform.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/arch.h>
+#include <asm/hardware/gic.h>
+#include <mach/map.h>
+
+#include <plat/cpu.h>
+#include <plat/regs-serial.h>
+
+#include "common.h"
+
+/*
+ * The following lookup table is used to override device names when devices
+ * are registered from device tree. This is temporarily added to enable
+ * device tree support addition for the EXYNOS5 architecture.
+ *
+ * For drivers that require platform data to be provided from the machine
+ * file, a platform data pointer can also be supplied along with the
+ * devices names. Usually, the platform data elements that cannot be parsed
+ * from the device tree by the drivers (example: function pointers) are
+ * supplied. But it should be noted that this is a temporary mechanism and
+ * at some point, the drivers should be capable of parsing all the platform
+ * data from the device tree.
+ */
+static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = {
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART0,
+ "exynos4210-uart.0", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART1,
+ "exynos4210-uart.1", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART2,
+ "exynos4210-uart.2", NULL),
+ OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS5_PA_UART3,
+ "exynos4210-uart.3", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL),
+ OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL),
+ {},
+};
+
+static void __init exynos5250_dt_map_io(void)
+{
+ exynos_init_io(NULL, 0);
+ s3c24xx_init_clocks(24000000);
+}
+
+static void __init exynos5250_dt_machine_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table,
+ exynos5250_auxdata_lookup, NULL);
+}
+
+static char const *exynos5250_dt_compat[] __initdata = {
+ "samsung,exynos5250",
+ NULL
+};
+
+DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
+ /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+ .init_irq = exynos5_init_irq,
+ .map_io = exynos5250_dt_map_io,
+ .handle_irq = gic_handle_irq,
+ .init_machine = exynos5250_dt_machine_init,
+ .timer = &exynos4_timer,
+ .dt_compat = exynos5250_dt_compat,
+ .restart = exynos5_restart,
+MACHINE_END
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* Re: [PATCH v4 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 22:37 ` Olof Johansson
-1 siblings, 0 replies; 46+ messages in thread
From: Olof Johansson @ 2012-03-14 22:37 UTC (permalink / raw)
To: Kukjin Kim
Cc: linux-arm-kernel, linux-samsung-soc, arnd, Thomas Abraham,
Grant Likely
On Wed, Mar 14, 2012 at 07:42:17AM -0700, Kukjin Kim wrote:
> This patch adds a new EXYNOS5 compatible device tree enabled board
> When using this, a corresponding device tree blob which describes the
> board's properties should be supplied at boot time to the kernel.
Hi,
Sorry, missed this last time around:
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index a2ed05c..ac24386 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -362,7 +362,18 @@ config MACH_SMDK4412
> Machine support for Samsung SMDK4412
> endif
>
> -comment "Flattened Device Tree based board for Exynos4 based SoC"
> +if ARCH_EXYNOS5
> +
> +comment "EXYNOS5250 Boards"
> +
> +config MACH_SMDK5250
> + bool "SMDK5250"
> + select SOC_EXYNOS5250
> + help
> + Machine support for Samsung SMDK5250
> +endif
There's no board file for SMDK5250 in this series (and there shouldn't be since
it should all be covered by MACH_EXYNOS5_DT. So the above config option can go
away.
-Olof
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5
@ 2012-03-14 22:37 ` Olof Johansson
0 siblings, 0 replies; 46+ messages in thread
From: Olof Johansson @ 2012-03-14 22:37 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 14, 2012 at 07:42:17AM -0700, Kukjin Kim wrote:
> This patch adds a new EXYNOS5 compatible device tree enabled board
> When using this, a corresponding device tree blob which describes the
> board's properties should be supplied at boot time to the kernel.
Hi,
Sorry, missed this last time around:
> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
> index a2ed05c..ac24386 100644
> --- a/arch/arm/mach-exynos/Kconfig
> +++ b/arch/arm/mach-exynos/Kconfig
> @@ -362,7 +362,18 @@ config MACH_SMDK4412
> Machine support for Samsung SMDK4412
> endif
>
> -comment "Flattened Device Tree based board for Exynos4 based SoC"
> +if ARCH_EXYNOS5
> +
> +comment "EXYNOS5250 Boards"
> +
> +config MACH_SMDK5250
> + bool "SMDK5250"
> + select SOC_EXYNOS5250
> + help
> + Machine support for Samsung SMDK5250
> +endif
There's no board file for SMDK5250 in this series (and there shouldn't be since
it should all be covered by MACH_EXYNOS5_DT. So the above config option can go
away.
-Olof
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v4 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5
2012-03-14 22:37 ` Olof Johansson
@ 2012-03-14 23:18 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 23:18 UTC (permalink / raw)
To: Olof Johansson
Cc: Kukjin Kim, Grant Likely, linux-samsung-soc, Thomas Abraham, arnd,
linux-arm-kernel
Olof Johansson wrote:
> On Wed, Mar 14, 2012 at 07:42:17AM -0700, Kukjin Kim wrote:
>> This patch adds a new EXYNOS5 compatible device tree enabled board
>> When using this, a corresponding device tree blob which describes the
>> board's properties should be supplied at boot time to the kernel.
>
> Hi,
>
Hi Olof,
> Sorry, missed this last time around:
>
No problem and thanks.
>> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
>> index a2ed05c..ac24386 100644
>> --- a/arch/arm/mach-exynos/Kconfig
>> +++ b/arch/arm/mach-exynos/Kconfig
>> @@ -362,7 +362,18 @@ config MACH_SMDK4412
>> Machine support for Samsung SMDK4412
>> endif
>>
>> -comment "Flattened Device Tree based board for Exynos4 based SoC"
>> +if ARCH_EXYNOS5
>> +
>> +comment "EXYNOS5250 Boards"
>> +
>> +config MACH_SMDK5250
>> + bool "SMDK5250"
>> + select SOC_EXYNOS5250
>> + help
>> + Machine support for Samsung SMDK5250
>> +endif
>
>
> There's no board file for SMDK5250 in this series (and there shouldn't be since
> it should all be covered by MACH_EXYNOS5_DT. So the above config option can go
> away.
>
Yeah, you're right. I think, it seem that remained after just testing
anyway, it will be fixed before sending pull request.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 11/12] ARM: EXYNOS: add support device tree enabled board file for EXYNOS5
@ 2012-03-14 23:18 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 23:18 UTC (permalink / raw)
To: linux-arm-kernel
Olof Johansson wrote:
> On Wed, Mar 14, 2012 at 07:42:17AM -0700, Kukjin Kim wrote:
>> This patch adds a new EXYNOS5 compatible device tree enabled board
>> When using this, a corresponding device tree blob which describes the
>> board's properties should be supplied at boot time to the kernel.
>
> Hi,
>
Hi Olof,
> Sorry, missed this last time around:
>
No problem and thanks.
>> diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
>> index a2ed05c..ac24386 100644
>> --- a/arch/arm/mach-exynos/Kconfig
>> +++ b/arch/arm/mach-exynos/Kconfig
>> @@ -362,7 +362,18 @@ config MACH_SMDK4412
>> Machine support for Samsung SMDK4412
>> endif
>>
>> -comment "Flattened Device Tree based board for Exynos4 based SoC"
>> +if ARCH_EXYNOS5
>> +
>> +comment "EXYNOS5250 Boards"
>> +
>> +config MACH_SMDK5250
>> + bool "SMDK5250"
>> + select SOC_EXYNOS5250
>> + help
>> + Machine support for Samsung SMDK5250
>> +endif
>
>
> There's no board file for SMDK5250 in this series (and there shouldn't be since
> it should all be covered by MACH_EXYNOS5_DT. So the above config option can go
> away.
>
Yeah, you're right. I think, it seem that remained after just testing
anyway, it will be fixed before sending pull request.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 12/12] ARM: dts: add initial dts file for EXYNOS5250, SMDK5250
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 14:42 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel, linux-samsung-soc
Cc: arnd, olof, Kukjin Kim, Thomas Abraham, Grant Likely
This patch adds initial dts file for EXYNOS5250 SoC. This dts
file is including the SoC specific devices and properties. And
adds the dts file for SMDK5250 board which uses the EXYNOS5250
dts file. Its board specific properites will be added later.
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 26 ++
arch/arm/boot/dts/exynos5250.dtsi | 413 +++++++++++++++++++++++++++++
2 files changed, 439 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos5250-smdk5250.dts
create mode 100644 arch/arm/boot/dts/exynos5250.dtsi
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
new file mode 100644
index 0000000..399d17b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -0,0 +1,26 @@
+/*
+ * SAMSUNG SMDK5250 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+ model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+ compatible = "samsung,smdk5250", "samsung,exynos5250";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
new file mode 100644
index 0000000..dfc4335
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -0,0 +1,413 @@
+/*
+ * SAMSUNG EXYNOS5250 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
+ * EXYNOS5250 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
+ * additional nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "samsung,exynos5250";
+ interrupt-parent = <&gic>;
+
+ gic:interrupt-controller@10490000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+ };
+
+ watchdog {
+ compatible = "samsung,s3c2410-wdt";
+ reg = <0x101D0000 0x100>;
+ interrupts = <0 42 0>;
+ };
+
+ rtc {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x101E0000 0x100>;
+ interrupts = <0 43 0>, <0 44 0>;
+ };
+
+ sdhci@12200000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12200000 0x100>;
+ interrupts = <0 75 0>;
+ };
+
+ sdhci@12210000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12210000 0x100>;
+ interrupts = <0 76 0>;
+ };
+
+ sdhci@12220000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12220000 0x100>;
+ interrupts = <0 77 0>;
+ };
+
+ sdhci@12230000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12230000 0x100>;
+ interrupts = <0 78 0>;
+ };
+
+ serial@12C00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 51 0>;
+ };
+
+ serial@12C10000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C10000 0x100>;
+ interrupts = <0 52 0>;
+ };
+
+ serial@12C20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C20000 0x100>;
+ interrupts = <0 53 0>;
+ };
+
+ serial@12C30000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C30000 0x100>;
+ interrupts = <0 54 0>;
+ };
+
+ i2c@12C60000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C60000 0x100>;
+ interrupts = <0 56 0>;
+ };
+
+ i2c@12C70000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C70000 0x100>;
+ interrupts = <0 57 0>;
+ };
+
+ i2c@12C80000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C80000 0x100>;
+ interrupts = <0 58 0>;
+ };
+
+ i2c@12C90000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C90000 0x100>;
+ interrupts = <0 59 0>;
+ };
+
+ i2c@12CA0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CA0000 0x100>;
+ interrupts = <0 60 0>;
+ };
+
+ i2c@12CB0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CB0000 0x100>;
+ interrupts = <0 61 0>;
+ };
+
+ i2c@12CC0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CC0000 0x100>;
+ interrupts = <0 62 0>;
+ };
+
+ i2c@12CD0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CD0000 0x100>;
+ interrupts = <0 63 0>;
+ };
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma0: pdma@121A0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121A0000 0x1000>;
+ interrupts = <0 34 0>;
+ };
+
+ pdma1: pdma@121B0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121B0000 0x1000>;
+ interrupts = <0 35 0>;
+ };
+
+ mdma0: pdma@10800000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x10800000 0x1000>;
+ interrupts = <0 33 0>;
+ };
+
+ mdma1: pdma@11C10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x11C10000 0x1000>;
+ interrupts = <0 124 0>;
+ };
+ };
+
+ gpio-controllers {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ gpio-controller;
+ ranges;
+
+ gpa0: gpio-controller@11400000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpa1: gpio-controller@11400020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpa2: gpio-controller@11400040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb0: gpio-controller@11400060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb1: gpio-controller@11400080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb2: gpio-controller@114000A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb3: gpio-controller@114000C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc0: gpio-controller@114000E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc1: gpio-controller@11400100 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400100 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc2: gpio-controller@11400120 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400120 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc3: gpio-controller@11400140 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400140 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpd0: gpio-controller@11400160 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400160 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpd1: gpio-controller@11400180 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400180 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy0: gpio-controller@114001A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy1: gpio-controller@114001C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy2: gpio-controller@114001E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy3: gpio-controller@11400200 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400200 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy4: gpio-controller@11400220 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400220 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy5: gpio-controller@11400240 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400240 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy6: gpio-controller@11400260 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400260 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx0: gpio-controller@11400C00 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C00 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx1: gpio-controller@11400C20 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C20 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx2: gpio-controller@11400C40 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C40 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx3: gpio-controller@11400C60 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C60 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe0: gpio-controller@13400000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe1: gpio-controller@13400020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf0: gpio-controller@13400040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf1: gpio-controller@13400060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpg0: gpio-controller@13400080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpg1: gpio-controller@134000A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x134000A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpg2: gpio-controller@134000C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x134000C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gph0: gpio-controller@134000E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x134000E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gph1: gpio-controller@13400100 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400100 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv0: gpio-controller@10D10000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv1: gpio-controller@10D10020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv2: gpio-controller@10D10040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv3: gpio-controller@10D10060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv4: gpio-controller@10D10080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpz: gpio-controller@03860000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x03860000 0x20>;
+ #gpio-cells = <4>;
+ };
+ };
+};
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread* [PATCH v4 12/12] ARM: dts: add initial dts file for EXYNOS5250, SMDK5250
@ 2012-03-14 14:42 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 14:42 UTC (permalink / raw)
To: linux-arm-kernel
This patch adds initial dts file for EXYNOS5250 SoC. This dts
file is including the SoC specific devices and properties. And
adds the dts file for SMDK5250 board which uses the EXYNOS5250
dts file. Its board specific properites will be added later.
Cc: Thomas Abraham <thomas.abraham@linaro.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
---
arch/arm/boot/dts/exynos5250-smdk5250.dts | 26 ++
arch/arm/boot/dts/exynos5250.dtsi | 413 +++++++++++++++++++++++++++++
2 files changed, 439 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos5250-smdk5250.dts
create mode 100644 arch/arm/boot/dts/exynos5250.dtsi
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
new file mode 100644
index 0000000..399d17b
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -0,0 +1,26 @@
+/*
+ * SAMSUNG SMDK5250 board device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+/include/ "exynos5250.dtsi"
+
+/ {
+ model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
+ compatible = "samsung,smdk5250", "samsung,exynos5250";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200";
+ };
+};
diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi
new file mode 100644
index 0000000..dfc4335
--- /dev/null
+++ b/arch/arm/boot/dts/exynos5250.dtsi
@@ -0,0 +1,413 @@
+/*
+ * SAMSUNG EXYNOS5250 SoC device tree source
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * SAMSUNG EXYNOS5250 SoC device nodes are listed in this file.
+ * EXYNOS5250 based board files can include this file and provide
+ * values for board specfic bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * EXYNOS5250 SoC. As device tree coverage for EXYNOS5250 increases,
+ * additional nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/include/ "skeleton.dtsi"
+
+/ {
+ compatible = "samsung,exynos5250";
+ interrupt-parent = <&gic>;
+
+ gic:interrupt-controller at 10490000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10490000 0x1000>, <0x10480000 0x100>;
+ };
+
+ watchdog {
+ compatible = "samsung,s3c2410-wdt";
+ reg = <0x101D0000 0x100>;
+ interrupts = <0 42 0>;
+ };
+
+ rtc {
+ compatible = "samsung,s3c6410-rtc";
+ reg = <0x101E0000 0x100>;
+ interrupts = <0 43 0>, <0 44 0>;
+ };
+
+ sdhci at 12200000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12200000 0x100>;
+ interrupts = <0 75 0>;
+ };
+
+ sdhci at 12210000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12210000 0x100>;
+ interrupts = <0 76 0>;
+ };
+
+ sdhci at 12220000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12220000 0x100>;
+ interrupts = <0 77 0>;
+ };
+
+ sdhci at 12230000 {
+ compatible = "samsung,exynos4210-sdhci";
+ reg = <0x12230000 0x100>;
+ interrupts = <0 78 0>;
+ };
+
+ serial at 12C00000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C00000 0x100>;
+ interrupts = <0 51 0>;
+ };
+
+ serial at 12C10000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C10000 0x100>;
+ interrupts = <0 52 0>;
+ };
+
+ serial at 12C20000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C20000 0x100>;
+ interrupts = <0 53 0>;
+ };
+
+ serial at 12C30000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x12C30000 0x100>;
+ interrupts = <0 54 0>;
+ };
+
+ i2c at 12C60000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C60000 0x100>;
+ interrupts = <0 56 0>;
+ };
+
+ i2c at 12C70000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C70000 0x100>;
+ interrupts = <0 57 0>;
+ };
+
+ i2c at 12C80000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C80000 0x100>;
+ interrupts = <0 58 0>;
+ };
+
+ i2c at 12C90000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12C90000 0x100>;
+ interrupts = <0 59 0>;
+ };
+
+ i2c at 12CA0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CA0000 0x100>;
+ interrupts = <0 60 0>;
+ };
+
+ i2c at 12CB0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CB0000 0x100>;
+ interrupts = <0 61 0>;
+ };
+
+ i2c at 12CC0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CC0000 0x100>;
+ interrupts = <0 62 0>;
+ };
+
+ i2c at 12CD0000 {
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x12CD0000 0x100>;
+ interrupts = <0 63 0>;
+ };
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma0: pdma at 121A0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121A0000 0x1000>;
+ interrupts = <0 34 0>;
+ };
+
+ pdma1: pdma at 121B0000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x121B0000 0x1000>;
+ interrupts = <0 35 0>;
+ };
+
+ mdma0: pdma at 10800000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x10800000 0x1000>;
+ interrupts = <0 33 0>;
+ };
+
+ mdma1: pdma at 11C10000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x11C10000 0x1000>;
+ interrupts = <0 124 0>;
+ };
+ };
+
+ gpio-controllers {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ gpio-controller;
+ ranges;
+
+ gpa0: gpio-controller at 11400000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpa1: gpio-controller at 11400020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpa2: gpio-controller at 11400040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb0: gpio-controller at 11400060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb1: gpio-controller at 11400080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb2: gpio-controller at 114000A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpb3: gpio-controller at 114000C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc0: gpio-controller at 114000E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114000E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc1: gpio-controller at 11400100 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400100 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc2: gpio-controller at 11400120 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400120 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpc3: gpio-controller at 11400140 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400140 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpd0: gpio-controller at 11400160 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400160 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpd1: gpio-controller at 11400180 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400180 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy0: gpio-controller at 114001A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy1: gpio-controller at 114001C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy2: gpio-controller at 114001E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x114001E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy3: gpio-controller at 11400200 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400200 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy4: gpio-controller at 11400220 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400220 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy5: gpio-controller at 11400240 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400240 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpy6: gpio-controller at 11400260 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400260 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx0: gpio-controller at 11400C00 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C00 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx1: gpio-controller at 11400C20 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C20 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx2: gpio-controller at 11400C40 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C40 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpx3: gpio-controller at 11400C60 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x11400C60 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe0: gpio-controller at 13400000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpe1: gpio-controller at 13400020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf0: gpio-controller at 13400040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpf1: gpio-controller at 13400060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpg0: gpio-controller at 13400080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpg1: gpio-controller at 134000A0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x134000A0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpg2: gpio-controller at 134000C0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x134000C0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gph0: gpio-controller at 134000E0 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x134000E0 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gph1: gpio-controller at 13400100 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x13400100 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv0: gpio-controller at 10D10000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10000 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv1: gpio-controller at 10D10020 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10020 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv2: gpio-controller at 10D10040 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10040 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv3: gpio-controller at 10D10060 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10060 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpv4: gpio-controller at 10D10080 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x10D10080 0x20>;
+ #gpio-cells = <4>;
+ };
+
+ gpz: gpio-controller at 03860000 {
+ compatible = "samsung,exynos4-gpio";
+ reg = <0x03860000 0x20>;
+ #gpio-cells = <4>;
+ };
+ };
+};
--
1.7.4.4
^ permalink raw reply related [flat|nested] 46+ messages in thread
* Re: [PATCH v4 00/12] ARM: EXYNOS: add support new EXYNOS5250
2012-03-14 14:42 ` Kukjin Kim
@ 2012-03-14 22:40 ` Olof Johansson
-1 siblings, 0 replies; 46+ messages in thread
From: Olof Johansson @ 2012-03-14 22:40 UTC (permalink / raw)
To: Kukjin Kim; +Cc: linux-arm-kernel, linux-samsung-soc, arnd
On Wed, Mar 14, 2012 at 07:42:06AM -0700, Kukjin Kim wrote:
> This patch adds support EXYNOS5250 SoC which has two A15 cores
> can be used on mobile and tablet devices.
Looks good. I've switched back with Arnd so he does pulls right now,
but I'd be OK with this going in as it is now (see one nit to fixup when you
build the branch -- no need to repost with it I think).
So, I'll leave it up to Arnd to pull but it looks good enough for me at this
time.
-Olof
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 00/12] ARM: EXYNOS: add support new EXYNOS5250
@ 2012-03-14 22:40 ` Olof Johansson
0 siblings, 0 replies; 46+ messages in thread
From: Olof Johansson @ 2012-03-14 22:40 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Mar 14, 2012 at 07:42:06AM -0700, Kukjin Kim wrote:
> This patch adds support EXYNOS5250 SoC which has two A15 cores
> can be used on mobile and tablet devices.
Looks good. I've switched back with Arnd so he does pulls right now,
but I'd be OK with this going in as it is now (see one nit to fixup when you
build the branch -- no need to repost with it I think).
So, I'll leave it up to Arnd to pull but it looks good enough for me at this
time.
-Olof
^ permalink raw reply [flat|nested] 46+ messages in thread
* Re: [PATCH v4 00/12] ARM: EXYNOS: add support new EXYNOS5250
2012-03-14 22:40 ` Olof Johansson
@ 2012-03-14 23:20 ` Kukjin Kim
-1 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 23:20 UTC (permalink / raw)
To: Olof Johansson; +Cc: Kukjin Kim, linux-samsung-soc, arnd, linux-arm-kernel
Olof Johansson wrote:
> On Wed, Mar 14, 2012 at 07:42:06AM -0700, Kukjin Kim wrote:
>> This patch adds support EXYNOS5250 SoC which has two A15 cores
>> can be used on mobile and tablet devices.
>
> Looks good. I've switched back with Arnd so he does pulls right now,
> but I'd be OK with this going in as it is now (see one nit to fixup when you
> build the branch -- no need to repost with it I think).
>
OK, let me do it.
> So, I'll leave it up to Arnd to pull but it looks good enough for me at this
> time.
>
OK, I see.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 46+ messages in thread
* [PATCH v4 00/12] ARM: EXYNOS: add support new EXYNOS5250
@ 2012-03-14 23:20 ` Kukjin Kim
0 siblings, 0 replies; 46+ messages in thread
From: Kukjin Kim @ 2012-03-14 23:20 UTC (permalink / raw)
To: linux-arm-kernel
Olof Johansson wrote:
> On Wed, Mar 14, 2012 at 07:42:06AM -0700, Kukjin Kim wrote:
>> This patch adds support EXYNOS5250 SoC which has two A15 cores
>> can be used on mobile and tablet devices.
>
> Looks good. I've switched back with Arnd so he does pulls right now,
> but I'd be OK with this going in as it is now (see one nit to fixup when you
> build the branch -- no need to repost with it I think).
>
OK, let me do it.
> So, I'll leave it up to Arnd to pull but it looks good enough for me at this
> time.
>
OK, I see.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung.com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
^ permalink raw reply [flat|nested] 46+ messages in thread