* VA-API brightness property
@ 2012-03-09 7:04 Oliver Seitz
2012-03-17 8:36 ` Oliver Seitz
0 siblings, 1 reply; 6+ messages in thread
From: Oliver Seitz @ 2012-03-09 7:04 UTC (permalink / raw)
To: intel-gfx
Hi!
I'm using the patched, VA-API enabled MPlayer on SandyBridge. System is
Debian Wheezy. Works great, decodes BluRay-like quality with neglectable
CPU load (below 5%).
Now, I'm trying to adjust brightness. I think I've read that VA-API
defines a brightness property, but MPlayer can not set it.
Is this feature still missing in the driver, or is MPlayer calling for
it in the wrong way?
Thanks for any hints!
Greets,
Kiste
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: VA-API brightness property
2012-03-09 7:04 VA-API brightness property Oliver Seitz
@ 2012-03-17 8:36 ` Oliver Seitz
2012-03-19 1:51 ` Xiang, Haihao
0 siblings, 1 reply; 6+ messages in thread
From: Oliver Seitz @ 2012-03-17 8:36 UTC (permalink / raw)
To: intel-gfx
Please, can anyone tell me if there is a list for user questions about
VAAPI? I have several questions...
Greets,
Kiste
Am 09.03.2012 08:04, schrieb Oliver Seitz:
> Hi!
>
> I'm using the patched, VA-API enabled MPlayer on SandyBridge. System is
> Debian Wheezy. Works great, decodes BluRay-like quality with neglectable
> CPU load (below 5%).
>
> Now, I'm trying to adjust brightness. I think I've read that VA-API
> defines a brightness property, but MPlayer can not set it.
>
> Is this feature still missing in the driver, or is MPlayer calling for
> it in the wrong way?
>
> Thanks for any hints!
>
> Greets,
> Kiste
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: VA-API brightness property
2012-03-17 8:36 ` Oliver Seitz
@ 2012-03-19 1:51 ` Xiang, Haihao
2012-03-24 9:19 ` VAAPI crashes X Angela Schmid
[not found] ` <4f6d91b5.ea10440a.24ac.ffffb18cSMTPIN_ADDED@mx.google.com>
0 siblings, 2 replies; 6+ messages in thread
From: Xiang, Haihao @ 2012-03-19 1:51 UTC (permalink / raw)
To: Oliver Seitz; +Cc: intel-gfx
> Please, can anyone tell me if there is a list for user questions about
> VAAPI? I have several questions...
The list for VAAPI is libva@lists.freedesktop.org
As for brightness property, the driver doesn't support it.
Thanks
Haihao
>
> Greets,
> Kiste
>
>
>
> Am 09.03.2012 08:04, schrieb Oliver Seitz:
> > Hi!
> >
> > I'm using the patched, VA-API enabled MPlayer on SandyBridge. System is
> > Debian Wheezy. Works great, decodes BluRay-like quality with neglectable
> > CPU load (below 5%).
> >
> > Now, I'm trying to adjust brightness. I think I've read that VA-API
> > defines a brightness property, but MPlayer can not set it.
> >
> > Is this feature still missing in the driver, or is MPlayer calling for
> > it in the wrong way?
> >
> > Thanks for any hints!
> >
> > Greets,
> > Kiste
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread
* VAAPI crashes X
2012-03-19 1:51 ` Xiang, Haihao
@ 2012-03-24 9:19 ` Angela Schmid
[not found] ` <4f6d91b5.ea10440a.24ac.ffffb18cSMTPIN_ADDED@mx.google.com>
1 sibling, 0 replies; 6+ messages in thread
From: Angela Schmid @ 2012-03-24 9:19 UTC (permalink / raw)
To: intel-gfx
[-- Attachment #1: Type: text/plain, Size: 4052 bytes --]
Hello
I switched to Mythtv 0.25 using VAAPI and playing a recording crashes X immediately, I see following messages, see run.log:
OpenGL: Could not determine whether Sync to VBlank is enabled.
libva: VA-API version 0.32.0
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib/dri/i965_drv_video.so
libva: va_openDriver() returns 0
(WW) intel(0): flip queue failed: Input/output error
(WW) intel(0): Page flip failed: Input/output error
(WW) intel(0): divisor 0 get vblank counter failed: Invalid argument
(EE) intel(0): Detected a hung GPU, disabling acceleration.
(EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg.
intel_do_flush_locked failed: Input/output error
/usr/bin/xinit: connection to X server lost
[ 663.812879] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 663.815205] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
[ 663.821719] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 791 at 785, next 792)
[ 663.825652] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=1
[ 663.825690] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 664.037996] ------------[ cut here ]------------
[ 664.038016] WARNING: at drivers/gpu/drm/i915/i915_gem.c:2397 i915_gem_object_put_fence+0xab/0xc0 [i915]()
[ 664.038018] Hardware name: System Product Name
[ 664.038019] Modules linked in: dvbloopback(O) rfcomm bnep bluetooth parport_pc ppdev binfmt_misc dm_crypt ipt_MASQUERADE
iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables snd_hda_codec_hdmi
snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi tda18271c2dd(O) snd_rawmidi arc4 ath9k
snd_seq_midi_event mac80211 snd_seq drxk(O) snd_timer snd_seq_device snd ddbridge(O) dvb_core(O) ath9k_common psmouse ath9k_hw ath
eeepc_wmi asus_wmi sparse_keymap soundcore serio_raw snd_page_alloc cxd2099(O) mei(C) cfg80211 lp parport usbhid hid usb_storage uas
8139too mxm_wmi 8139cp firewire_ohci firewire_core crc_itu_t i915 ahci libahci drm_kms_helper xhci_hcd e1000e drm i2c_algo_bit video
wmi
[ 664.038054] Pid: 3156, comm: Xorg Tainted: G C O 3.3.0-rc2-angela2+ #1
[ 664.038055] Call Trace:
[ 664.038061] [<ffffffff8104d21f>] warn_slowpath_common+0x7f/0xc0
[ 664.038064] [<ffffffff8104d27a>] warn_slowpath_null+0x1a/0x20
[ 664.038072] [<ffffffffa00db45b>] i915_gem_object_put_fence+0xab/0xc0 [i915]
[ 664.038079] [<ffffffffa00dce93>] i915_gem_object_unbind+0xa3/0x2d0 [i915]
[ 664.038090] [<ffffffffa002a117>] ? drm_mode_object_put+0x47/0x60 [drm]
[ 664.038097] [<ffffffffa00dd0f4>] i915_gem_free_object_tail+0x34/0x150 [i915]
[ 664.038105] [<ffffffffa00dff61>] i915_gem_free_object+0x51/0x60 [i915]
[ 664.038112] [<ffffffffa001fc9a>] drm_gem_object_free+0x2a/0x30 [drm]
[ 664.038121] [<ffffffffa00ed970>] intel_user_framebuffer_destroy+0x70/0x80 [i915]
[ 664.038129] [<ffffffffa002e613>] drm_fb_release+0x83/0xb0 [drm]
[ 664.038136] [<ffffffffa001f810>] drm_release+0x5e0/0x6e0 [drm]
[ 664.038139] [<ffffffff811753ca>] fput+0xea/0x220
[ 664.038141] [<ffffffff81171b36>] filp_close+0x66/0x90
[ 664.038143] [<ffffffff81050d38>] put_files_struct+0x88/0xf0
[ 664.038145] [<ffffffff81050e64>] exit_files+0x54/0x70
[ 664.038147] [<ffffffff8105134a>] do_exit+0x19a/0x8c0
[ 664.038150] [<ffffffff81051dd4>] do_group_exit+0x44/0xa0
[ 664.038152] [<ffffffff81051e47>] sys_exit_group+0x17/0x20
[ 664.038155] [<ffffffff816195e9>] system_call_fastpath+0x16/0x1b
[ 664.038156] ---[ end trace 5bed8a9786c4dd85 ]---
cat /sys/kernel/debug/dri/0/i915_error_state
cat: /sys/kernel/debug/dri/0/i915_error_state: Cannot allocate memory
I googled, but didn't find a solution. What is wrong here ?
--------------------------------------
I don't have an xorg.conf. Have updated xorg-edgers intel drivers.
pkg-config --modversion libdrm
2.4.32
A kernel 3.3.0-rc2, with interlaced patches, from 14.02.2012.
[-- Attachment #2: dmesg.log --]
[-- Type: application/octet-stream, Size: 76479 bytes --]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.0-rc2-angela2+ (root@minerva11) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) ) #1 SMP Tue Feb 14 13:17:34 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.3.0-rc2-angela2+ root=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b400 (usable)
[ 0.000000] BIOS-e820: 000000000009b400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000ae5cc000 (usable)
[ 0.000000] BIOS-e820: 00000000ae5cc000 - 00000000ae628000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ae628000 - 00000000aeb36000 (reserved)
[ 0.000000] BIOS-e820: 00000000aeb36000 - 00000000aeb39000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aeb39000 - 00000000aed9f000 (reserved)
[ 0.000000] BIOS-e820: 00000000aed9f000 - 00000000aedb0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aedb0000 - 00000000aedc7000 (reserved)
[ 0.000000] BIOS-e820: 00000000aedc7000 - 00000000aedc9000 (usable)
[ 0.000000] BIOS-e820: 00000000aedc9000 - 00000000aedca000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aedca000 - 00000000aedd2000 (reserved)
[ 0.000000] BIOS-e820: 00000000aedd2000 - 00000000aeddc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aeddc000 - 00000000aee38000 (reserved)
[ 0.000000] BIOS-e820: 00000000aee38000 - 00000000aee7b000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000aee7b000 - 00000000af000000 (usable)
[ 0.000000] BIOS-e820: 00000000af800000 - 00000000cfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000022fe00000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/P8Z68-V PRO, BIOS 1101 11/23/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x22fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 200000000 mask FC0000000 write-back
[ 0.000000] 2 base 0AF800000 mask FFF800000 uncachable
[ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 5 base 22FE00000 mask FFFE00000 uncachable
[ 0.000000] 6 base 230000000 mask FF0000000 uncachable
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 8GB, type WB
[ 0.000000] reg 1, base: 8GB, range: 1GB, type WB
[ 0.000000] reg 2, base: 2808MB, range: 8MB, type UC
[ 0.000000] reg 3, base: 2816MB, range: 256MB, type UC
[ 0.000000] reg 4, base: 3GB, range: 1GB, type UC
[ 0.000000] reg 5, base: 8958MB, range: 2MB, type UC
[ 0.000000] reg 6, base: 8960MB, range: 256MB, type UC
[ 0.000000] total RAM covered: 7670M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 8 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 2GB, type WB
[ 0.000000] reg 1, base: 2GB, range: 512MB, type WB
[ 0.000000] reg 2, base: 2560MB, range: 256MB, type WB
[ 0.000000] reg 3, base: 2808MB, range: 8MB, type UC
[ 0.000000] reg 4, base: 4GB, range: 4GB, type WB
[ 0.000000] reg 5, base: 8GB, range: 512MB, type WB
[ 0.000000] reg 6, base: 8704MB, range: 256MB, type WB
[ 0.000000] reg 7, base: 8958MB, range: 2MB, type UC
[ 0.000000] e820 update range: 00000000af800000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xaf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fcf40] fcf40
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000af000000
[ 0.000000] 0000000000 - 00af000000 page 2M
[ 0.000000] kernel direct mapping tables up to af000000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000022fe00000
[ 0.000000] 0100000000 - 022fe00000 page 2M
[ 0.000000] kernel direct mapping tables up to 22fe00000 @ aeff6000-af000000
[ 0.000000] RAMDISK: 35a3c000 - 36d16000
[ 0.000000] ACPI: RSDP 00000000000f0420 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000ae61d068 0004C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000ae627250 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000ae61d140 0A10B (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000aedd3f80 00040
[ 0.000000] ACPI: APIC 00000000ae627348 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000ae6273e0 001D6 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 00000000ae6275b8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000ae6275f8 00038 (v01 ALASKA A M I 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000022fe00000
[ 0.000000] Initmem setup node 0 0000000000000000-000000022fe00000
[ 0.000000] NODE_DATA [000000022fdfb000 - 000000022fdfffff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880227c00000-ffff88022f3fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0022fe00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009b
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000ae5cc
[ 0.000000] 0: 0x000aedc7 -> 0x000aedc9
[ 0.000000] 0: 0x000aee7b -> 0x000af000
[ 0.000000] 0: 0x00100000 -> 0x0022fe00
[ 0.000000] On node 0 totalpages: 1958110
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3910 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 693139 pages, LIFO batch:31
[ 0.000000] Normal zone: 19448 pages used for memmap
[ 0.000000] Normal zone: 1225224 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000ae5cc000 - 00000000ae628000
[ 0.000000] PM: Registered nosave memory: 00000000ae628000 - 00000000aeb36000
[ 0.000000] PM: Registered nosave memory: 00000000aeb36000 - 00000000aeb39000
[ 0.000000] PM: Registered nosave memory: 00000000aeb39000 - 00000000aed9f000
[ 0.000000] PM: Registered nosave memory: 00000000aed9f000 - 00000000aedb0000
[ 0.000000] PM: Registered nosave memory: 00000000aedb0000 - 00000000aedc7000
[ 0.000000] PM: Registered nosave memory: 00000000aedc9000 - 00000000aedca000
[ 0.000000] PM: Registered nosave memory: 00000000aedca000 - 00000000aedd2000
[ 0.000000] PM: Registered nosave memory: 00000000aedd2000 - 00000000aeddc000
[ 0.000000] PM: Registered nosave memory: 00000000aeddc000 - 00000000aee38000
[ 0.000000] PM: Registered nosave memory: 00000000aee38000 - 00000000aee7b000
[ 0.000000] PM: Registered nosave memory: 00000000af000000 - 00000000af800000
[ 0.000000] PM: Registered nosave memory: 00000000af800000 - 00000000cfa00000
[ 0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfa00000 (gap: cfa00000:2f31c000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88022fa00000 s82368 r8192 d24128 u262144
[ 0.000000] pcpu-alloc: s82368 r8192 d24128 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1922273
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.3.0-rc2-angela2+ root=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7607652k/9172992k available (6261k kernel code, 1340552k absent, 224788k reserved, 6834k data, 892k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 3410.872 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6821.74 BogoMIPS (lpj=13643488)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000022] Security Framework initialized
[ 0.000032] AppArmor: AppArmor initialized
[ 0.000523] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.001759] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002247] Mount-cache hash table entries: 256
[ 0.002321] Initializing cgroup subsys cpuacct
[ 0.002324] Initializing cgroup subsys memory
[ 0.002329] Initializing cgroup subsys devices
[ 0.002331] Initializing cgroup subsys freezer
[ 0.002333] Initializing cgroup subsys net_cls
[ 0.002335] Initializing cgroup subsys blkio
[ 0.002340] Initializing cgroup subsys perf_event
[ 0.002359] CPU: Physical Processor ID: 0
[ 0.002360] CPU: Processor Core ID: 0
[ 0.002364] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002365] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002369] mce: CPU supports 9 MCE banks
[ 0.002380] CPU0: Thermal monitoring enabled (TM1)
[ 0.002387] using mwait in idle threads.
[ 0.004068] ACPI: Core revision 20120111
[ 0.215778] ftrace: allocating 23246 entries in 91 pages
[ 0.225275] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.264931] CPU0: Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz stepping 07
[ 0.372767] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.372772] PEBS disabled due to CPU errata.
[ 0.372774] ... version: 3
[ 0.372775] ... bit width: 48
[ 0.372777] ... generic registers: 4
[ 0.372778] ... value mask: 0000ffffffffffff
[ 0.372780] ... max period: 000000007fffffff
[ 0.372782] ... fixed-purpose events: 3
[ 0.372784] ... event mask: 000000070000000f
[ 0.372878] Booting Node 0, Processors #1
[ 0.372880] smpboot cpu 1: start_ip = 96000
[ 0.404044] #2
[ 0.404046] smpboot cpu 2: start_ip = 96000
[ 0.435206] #3
[ 0.435208] smpboot cpu 3: start_ip = 96000
[ 0.466364] #4
[ 0.466366] smpboot cpu 4: start_ip = 96000
[ 0.497557] #5
[ 0.497560] smpboot cpu 5: start_ip = 96000
[ 0.528719] #6
[ 0.528722] smpboot cpu 6: start_ip = 96000
[ 0.559879] #7 Ok.
[ 0.559882] smpboot cpu 7: start_ip = 96000
[ 0.590995] Brought up 8 CPUs
[ 0.590999] Total of 8 processors activated (54573.95 BogoMIPS).
[ 0.597637] devtmpfs: initialized
[ 0.597725] PM: Registering ACPI NVS region at ae5cc000 (376832 bytes)
[ 0.597731] PM: Registering ACPI NVS region at aeb36000 (12288 bytes)
[ 0.597733] PM: Registering ACPI NVS region at aed9f000 (69632 bytes)
[ 0.597735] PM: Registering ACPI NVS region at aedc9000 (4096 bytes)
[ 0.597737] PM: Registering ACPI NVS region at aedd2000 (40960 bytes)
[ 0.597741] PM: Registering ACPI NVS region at aee38000 (274432 bytes)
[ 0.598228] print_constraints: dummy:
[ 0.598255] RTC time: 8:34:59, date: 03/24/12
[ 0.598276] NET: Registered protocol family 16
[ 0.598337] ACPI: bus type pci registered
[ 0.598375] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.598378] PCI: not using MMCONFIG
[ 0.598380] PCI: Using configuration type 1 for base access
[ 0.598808] bio: create slab <bio-0> at 0
[ 0.598853] ACPI: Added _OSI(Module Device)
[ 0.598855] ACPI: Added _OSI(Processor Device)
[ 0.598856] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.598858] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.599666] ACPI: EC: Look up EC in DSDT
[ 0.600430] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.602058] ACPI: SSDT 00000000aedd2818 0079C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.602336] ACPI: Dynamic OEM Table Load:
[ 0.602338] ACPI: SSDT (null) 0079C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.602368] ACPI: SSDT 00000000aedd9a18 0021C (v01 AMI CST 00000001 MSFT 03000001)
[ 0.602587] ACPI: Dynamic OEM Table Load:
[ 0.602589] ACPI: SSDT (null) 0021C (v01 AMI CST 00000001 MSFT 03000001)
[ 0.603071] ACPI: Interpreter enabled
[ 0.603075] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.603088] ACPI: Using IOAPIC for interrupt routing
[ 0.603103] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[ 0.603138] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in ACPI motherboard resources
[ 0.614409] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.617472] ACPI: EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
[ 0.617577] ACPI: No dock devices found.
[ 0.617580] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.617687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.617790] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.617792] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.617795] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.617797] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
[ 0.617800] pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xffffffff]
[ 0.617804] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000cdfff])
[ 0.617823] PCI host bridge to bus 0000:00
[ 0.617825] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.617828] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.617830] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.617832] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xffffffff]
[ 0.617839] pci 0000:00:00.0: [8086:0100] type 0 class 0x000600
[ 0.617866] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[ 0.617888] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.617898] pci 0000:00:01.1: [8086:0105] type 1 class 0x000604
[ 0.617919] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[ 0.617933] pci 0000:00:02.0: [8086:0122] type 0 class 0x000300
[ 0.617940] pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
[ 0.617945] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.617948] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.617992] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.618013] pci 0000:00:16.0: reg 10: [mem 0xfbf29000-0xfbf2900f 64bit]
[ 0.618082] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.618111] pci 0000:00:19.0: [8086:1503] type 0 class 0x000200
[ 0.618127] pci 0000:00:19.0: reg 10: [mem 0xfbf00000-0xfbf1ffff]
[ 0.618135] pci 0000:00:19.0: reg 14: [mem 0xfbf28000-0xfbf28fff]
[ 0.618143] pci 0000:00:19.0: reg 18: [io 0xf080-0xf09f]
[ 0.618201] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.618223] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.618243] pci 0000:00:1a.0: reg 10: [mem 0xfbf27000-0xfbf273ff]
[ 0.618327] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.618351] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.618365] pci 0000:00:1b.0: reg 10: [mem 0xfbf20000-0xfbf23fff 64bit]
[ 0.618427] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.618449] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.618522] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.618546] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 0.618620] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.618642] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604
[ 0.618716] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.618741] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 0.618815] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.618837] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[ 0.618910] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.618934] pci 0000:00:1c.6: [8086:244e] type 1 class 0x000604
[ 0.619008] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.619032] pci 0000:00:1c.7: [8086:1c1e] type 1 class 0x000604
[ 0.619106] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[ 0.619133] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.619152] pci 0000:00:1d.0: reg 10: [mem 0xfbf26000-0xfbf263ff]
[ 0.619237] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.619261] pci 0000:00:1f.0: [8086:1c44] type 0 class 0x000601
[ 0.619378] pci 0000:00:1f.2: [8086:1c02] type 0 class 0x000106
[ 0.619395] pci 0000:00:1f.2: reg 10: [io 0xf0d0-0xf0d7]
[ 0.619402] pci 0000:00:1f.2: reg 14: [io 0xf0c0-0xf0c3]
[ 0.619409] pci 0000:00:1f.2: reg 18: [io 0xf0b0-0xf0b7]
[ 0.619416] pci 0000:00:1f.2: reg 1c: [io 0xf0a0-0xf0a3]
[ 0.619423] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.619430] pci 0000:00:1f.2: reg 24: [mem 0xfbf25000-0xfbf257ff]
[ 0.619471] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.619488] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.619501] pci 0000:00:1f.3: reg 10: [mem 0xfbf24000-0xfbf240ff 64bit]
[ 0.619521] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.619559] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.619588] pci 0000:02:00.0: [168c:0030] type 0 class 0x000280
[ 0.619601] pci 0000:02:00.0: reg 10: [mem 0xfbe00000-0xfbe1ffff 64bit]
[ 0.619634] pci 0000:02:00.0: reg 30: [mem 0xfbe20000-0xfbe2ffff pref]
[ 0.619667] pci 0000:02:00.0: supports D1
[ 0.619668] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.624610] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[ 0.624617] pci 0000:00:01.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.624692] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.624782] pci 0000:04:00.0: [1b21:1042] type 0 class 0x000c03
[ 0.624810] pci 0000:04:00.0: reg 10: [mem 0xfbd00000-0xfbd07fff 64bit]
[ 0.624954] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.632611] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.632623] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.632733] pci 0000:05:00.0: [dd01:0003] type 0 class 0x000480
[ 0.632762] pci 0000:05:00.0: reg 10: [mem 0xfbc00000-0xfbc0ffff 64bit]
[ 0.640605] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.640617] pci 0000:00:1c.2: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.640724] pci 0000:06:00.0: [197b:2362] type 0 class 0x000101
[ 0.640758] pci 0000:06:00.0: reg 10: [io 0xe040-0xe047]
[ 0.640774] pci 0000:06:00.0: reg 14: [io 0xe030-0xe033]
[ 0.640789] pci 0000:06:00.0: reg 18: [io 0xe020-0xe027]
[ 0.640805] pci 0000:06:00.0: reg 1c: [io 0xe010-0xe013]
[ 0.640820] pci 0000:06:00.0: reg 20: [io 0xe000-0xe00f]
[ 0.640836] pci 0000:06:00.0: reg 24: [mem 0xfbb10000-0xfbb101ff]
[ 0.640851] pci 0000:06:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[ 0.640912] pci 0000:06:00.0: PME# supported from D3hot
[ 0.648599] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.648607] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.648613] pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.648725] pci 0000:07:00.0: [1b21:1042] type 0 class 0x000c03
[ 0.648753] pci 0000:07:00.0: reg 10: [mem 0xfba00000-0xfba07fff 64bit]
[ 0.648897] pci 0000:07:00.0: PME# supported from D3hot D3cold
[ 0.656594] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
[ 0.656605] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.656706] pci 0000:08:00.0: [1b21:1080] type 1 class 0x000604
[ 0.656823] pci 0000:00:1c.6: PCI bridge to [bus 08-09] (subtractive decode)
[ 0.656828] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.656832] pci 0000:00:1c.6: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.656837] pci 0000:00:1c.6: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.656838] pci 0000:00:1c.6: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.656840] pci 0000:00:1c.6: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.656841] pci 0000:00:1c.6: bridge window [mem 0xcfa00000-0xffffffff] (subtractive decode)
[ 0.656898] pci 0000:09:00.0: [10ec:8139] type 0 class 0x000200
[ 0.656928] pci 0000:09:00.0: reg 10: [io 0xd000-0xd0ff]
[ 0.656945] pci 0000:09:00.0: reg 14: [mem 0xfb901000-0xfb9010ff]
[ 0.657072] pci 0000:09:00.0: supports D1 D2
[ 0.657073] pci 0000:09:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.657108] pci 0000:09:02.0: [1106:3044] type 0 class 0x000c00
[ 0.657139] pci 0000:09:02.0: reg 10: [mem 0xfb900000-0xfb9007ff]
[ 0.657156] pci 0000:09:02.0: reg 14: [io 0xd100-0xd17f]
[ 0.657286] pci 0000:09:02.0: supports D2
[ 0.657287] pci 0000:09:02.0: PME# supported from D2 D3hot D3cold
[ 0.657366] pci 0000:08:00.0: PCI bridge to [bus 09-09] (subtractive decode)
[ 0.657376] pci 0000:08:00.0: bridge window [io 0xd000-0xdfff]
[ 0.657382] pci 0000:08:00.0: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.657392] pci 0000:08:00.0: bridge window [io 0xd000-0xdfff] (subtractive decode)
[ 0.657393] pci 0000:08:00.0: bridge window [mem 0xfb900000-0xfb9fffff] (subtractive decode)
[ 0.657395] pci 0000:08:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.657396] pci 0000:08:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
[ 0.657398] pci 0000:08:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.657400] pci 0000:08:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.657401] pci 0000:08:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.657403] pci 0000:08:00.0: bridge window [mem 0xcfa00000-0xffffffff] (subtractive decode)
[ 0.657473] pci 0000:0a:00.0: [1b4b:9172] type 0 class 0x000106
[ 0.657490] pci 0000:0a:00.0: reg 10: [io 0xc040-0xc047]
[ 0.657502] pci 0000:0a:00.0: reg 14: [io 0xc030-0xc033]
[ 0.657514] pci 0000:0a:00.0: reg 18: [io 0xc020-0xc027]
[ 0.657526] pci 0000:0a:00.0: reg 1c: [io 0xc010-0xc013]
[ 0.657538] pci 0000:0a:00.0: reg 20: [io 0xc000-0xc00f]
[ 0.657550] pci 0000:0a:00.0: reg 24: [mem 0xfb810000-0xfb8101ff]
[ 0.657563] pci 0000:0a:00.0: reg 30: [mem 0xfb800000-0xfb80ffff pref]
[ 0.657620] pci 0000:0a:00.0: PME# supported from D3hot
[ 0.664587] pci 0000:00:1c.7: PCI bridge to [bus 0a-0a]
[ 0.664595] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.664601] pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfb8fffff]
[ 0.664668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.664732] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.664748] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.664763] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.664776] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 0.664790] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 0.664804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.664828] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.664842] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT]
[ 0.664857] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6.BR24._PRT]
[ 0.664882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[ 0.664948] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.665062] pci0000:00: ACPI _OSC control (0x1c) granted
[ 0.667844] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.667875] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.667903] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.667931] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.667959] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12 14 15)
[ 0.667986] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.668014] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 *4 5 6 7 10 11 12 14 15)
[ 0.668042] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.668095] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.668102] vgaarb: loaded
[ 0.668104] vgaarb: bridge control possible 0000:00:02.0
[ 0.668169] SCSI subsystem initialized
[ 0.668186] libata version 3.00 loaded.
[ 0.668207] usbcore: registered new interface driver usbfs
[ 0.668213] usbcore: registered new interface driver hub
[ 0.668224] usbcore: registered new device driver usb
[ 0.668262] PCI: Using ACPI for IRQ routing
[ 0.669555] PCI: pci_cache_line_size set to 64 bytes
[ 0.669648] reserve RAM buffer: 000000000009b400 - 000000000009ffff
[ 0.669650] reserve RAM buffer: 00000000ae5cc000 - 00000000afffffff
[ 0.669652] reserve RAM buffer: 00000000aedc9000 - 00000000afffffff
[ 0.669654] reserve RAM buffer: 00000000af000000 - 00000000afffffff
[ 0.669655] reserve RAM buffer: 000000022fe00000 - 000000022fffffff
[ 0.669709] NetLabel: Initializing
[ 0.669711] NetLabel: domain hash size = 128
[ 0.669713] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.669720] NetLabel: unlabeled traffic allowed by default
[ 0.669748] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.669753] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.671764] Switching to clocksource hpet
[ 0.675328] AppArmor: AppArmor Filesystem Enabled
[ 0.675341] pnp: PnP ACPI init
[ 0.675350] ACPI: bus type pnp registered
[ 0.675423] pnp 00:00: [bus 00-ff]
[ 0.675425] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.675426] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.675427] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.675429] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.675430] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[ 0.675431] pnp 00:00: [mem 0xcfa00000-0xffffffff window]
[ 0.675432] pnp 00:00: [mem 0x00000000 window]
[ 0.675460] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.675492] pnp 00:01: [mem 0xfed10000-0xfed19fff]
[ 0.675493] pnp 00:01: [mem 0xe0000000-0xe3ffffff]
[ 0.675494] pnp 00:01: [mem 0xfed90000-0xfed93fff]
[ 0.675495] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.675496] pnp 00:01: [mem 0xfee00000-0xfee0ffff]
[ 0.675520] system 00:01: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.675523] system 00:01: [mem 0xe0000000-0xe3ffffff] has been reserved
[ 0.675527] system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.675531] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.675533] system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.675536] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.675571] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.675573] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.675574] pnp 00:02: [io 0x0290-0x029f]
[ 0.675575] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
[ 0.675596] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.675599] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.675606] pnp 00:03: [dma 4]
[ 0.675607] pnp 00:03: [io 0x0000-0x000f]
[ 0.675608] pnp 00:03: [io 0x0081-0x0083]
[ 0.675610] pnp 00:03: [io 0x0087]
[ 0.675611] pnp 00:03: [io 0x0089-0x008b]
[ 0.675612] pnp 00:03: [io 0x008f]
[ 0.675613] pnp 00:03: [io 0x00c0-0x00df]
[ 0.675625] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.675630] pnp 00:04: [io 0x0070-0x0071]
[ 0.675636] pnp 00:04: [irq 8]
[ 0.675649] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.675654] pnp 00:05: [io 0x0061]
[ 0.675664] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.675673] pnp 00:06: [io 0x0010-0x001f]
[ 0.675674] pnp 00:06: [io 0x0022-0x003f]
[ 0.675675] pnp 00:06: [io 0x0044-0x005f]
[ 0.675676] pnp 00:06: [io 0x0063]
[ 0.675677] pnp 00:06: [io 0x0065]
[ 0.675678] pnp 00:06: [io 0x0067-0x006f]
[ 0.675679] pnp 00:06: [io 0x0072-0x007f]
[ 0.675680] pnp 00:06: [io 0x0080]
[ 0.675681] pnp 00:06: [io 0x0084-0x0086]
[ 0.675681] pnp 00:06: [io 0x0088]
[ 0.675682] pnp 00:06: [io 0x008c-0x008e]
[ 0.675683] pnp 00:06: [io 0x0090-0x009f]
[ 0.675684] pnp 00:06: [io 0x00a2-0x00bf]
[ 0.675685] pnp 00:06: [io 0x00e0-0x00ef]
[ 0.675686] pnp 00:06: [io 0x04d0-0x04d1]
[ 0.675712] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.675715] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.675720] pnp 00:07: [io 0x00f0-0x00ff]
[ 0.675724] pnp 00:07: [irq 13]
[ 0.675736] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.675901] pnp 00:08: [io 0x0400-0x0453]
[ 0.675902] pnp 00:08: [io 0x0458-0x047f]
[ 0.675903] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
[ 0.675904] pnp 00:08: [io 0x0500-0x057f]
[ 0.675905] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.675906] pnp 00:08: [mem 0xfec00000-0xfecfffff]
[ 0.675907] pnp 00:08: [mem 0xfed08000-0xfed08fff]
[ 0.675908] pnp 00:08: [mem 0xff000000-0xffffffff]
[ 0.675933] system 00:08: [io 0x0400-0x0453] has been reserved
[ 0.675935] system 00:08: [io 0x0458-0x047f] has been reserved
[ 0.675938] system 00:08: [io 0x0500-0x057f] has been reserved
[ 0.675940] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.675943] system 00:08: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.675946] system 00:08: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.675948] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.675951] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.675971] pnp 00:09: [io 0x0454-0x0457]
[ 0.675992] system 00:09: [io 0x0454-0x0457] has been reserved
[ 0.675995] system 00:09: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.676065] pnp 00:0a: [mem 0xfed00000-0xfed003ff]
[ 0.676086] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.676173] pnp: PnP ACPI: found 11 devices
[ 0.676175] ACPI: ACPI bus type pnp unregistered
[ 0.681865] PCI: max bus depth: 2 pci_try_num: 3
[ 0.681930] pci 0000:00:1c.3: BAR 15: assigned [mem 0xcfa00000-0xcfafffff pref]
[ 0.681934] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.681939] pci 0000:00:01.1: PCI bridge to [bus 02-02]
[ 0.681941] pci 0000:00:01.1: bridge window [mem 0xfbe00000-0xfbefffff]
[ 0.681945] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.681957] pci 0000:00:1c.1: PCI bridge to [bus 04-04]
[ 0.681962] pci 0000:00:1c.1: bridge window [mem 0xfbd00000-0xfbdfffff]
[ 0.681970] pci 0000:00:1c.2: PCI bridge to [bus 05-05]
[ 0.681976] pci 0000:00:1c.2: bridge window [mem 0xfbc00000-0xfbcfffff]
[ 0.681985] pci 0000:06:00.0: BAR 6: assigned [mem 0xcfa00000-0xcfa0ffff pref]
[ 0.681987] pci 0000:00:1c.3: PCI bridge to [bus 06-06]
[ 0.681991] pci 0000:00:1c.3: bridge window [io 0xe000-0xefff]
[ 0.681996] pci 0000:00:1c.3: bridge window [mem 0xfbb00000-0xfbbfffff]
[ 0.682001] pci 0000:00:1c.3: bridge window [mem 0xcfa00000-0xcfafffff pref]
[ 0.682008] pci 0000:00:1c.4: PCI bridge to [bus 07-07]
[ 0.682013] pci 0000:00:1c.4: bridge window [mem 0xfba00000-0xfbafffff]
[ 0.682022] pci 0000:08:00.0: PCI bridge to [bus 09-09]
[ 0.682026] pci 0000:08:00.0: bridge window [io 0xd000-0xdfff]
[ 0.682034] pci 0000:08:00.0: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.682049] pci 0000:00:1c.6: PCI bridge to [bus 08-09]
[ 0.682052] pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
[ 0.682057] pci 0000:00:1c.6: bridge window [mem 0xfb900000-0xfb9fffff]
[ 0.682066] pci 0000:00:1c.7: PCI bridge to [bus 0a-0a]
[ 0.682069] pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
[ 0.682075] pci 0000:00:1c.7: bridge window [mem 0xfb800000-0xfb8fffff]
[ 0.682126] pci 0000:08:00.0: setting latency timer to 64
[ 0.682135] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.682136] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.682137] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.682138] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xffffffff]
[ 0.682140] pci_bus 0000:02: resource 1 [mem 0xfbe00000-0xfbefffff]
[ 0.682141] pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
[ 0.682143] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff]
[ 0.682144] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
[ 0.682145] pci_bus 0000:06: resource 1 [mem 0xfbb00000-0xfbbfffff]
[ 0.682146] pci_bus 0000:06: resource 2 [mem 0xcfa00000-0xcfafffff pref]
[ 0.682148] pci_bus 0000:07: resource 1 [mem 0xfba00000-0xfbafffff]
[ 0.682149] pci_bus 0000:08: resource 0 [io 0xd000-0xdfff]
[ 0.682150] pci_bus 0000:08: resource 1 [mem 0xfb900000-0xfb9fffff]
[ 0.682151] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7]
[ 0.682152] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff]
[ 0.682154] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.682155] pci_bus 0000:08: resource 7 [mem 0xcfa00000-0xffffffff]
[ 0.682156] pci_bus 0000:09: resource 0 [io 0xd000-0xdfff]
[ 0.682157] pci_bus 0000:09: resource 1 [mem 0xfb900000-0xfb9fffff]
[ 0.682159] pci_bus 0000:09: resource 4 [io 0xd000-0xdfff]
[ 0.682160] pci_bus 0000:09: resource 5 [mem 0xfb900000-0xfb9fffff]
[ 0.682161] pci_bus 0000:09: resource 8 [io 0x0000-0x0cf7]
[ 0.682162] pci_bus 0000:09: resource 9 [io 0x0d00-0xffff]
[ 0.682164] pci_bus 0000:09: resource 10 [mem 0x000a0000-0x000bffff]
[ 0.682165] pci_bus 0000:09: resource 11 [mem 0xcfa00000-0xffffffff]
[ 0.682166] pci_bus 0000:0a: resource 0 [io 0xc000-0xcfff]
[ 0.682167] pci_bus 0000:0a: resource 1 [mem 0xfb800000-0xfb8fffff]
[ 0.682184] NET: Registered protocol family 2
[ 0.682330] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.682935] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.683899] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.684016] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.684018] TCP reno registered
[ 0.684029] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.684054] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.684116] NET: Registered protocol family 1
[ 0.684128] pci 0000:00:02.0: Boot video device
[ 0.939732] PCI: CLS 64 bytes, default 64
[ 0.939765] Trying to unpack rootfs image as initramfs...
[ 1.165513] Freeing initrd memory: 19304k freed
[ 1.167118] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.167124] Placing 64MB software IO TLB between ffff8800aa5cc000 - ffff8800ae5cc000
[ 1.167127] software IO TLB at phys 0xaa5cc000 - 0xae5cc000
[ 1.167611] audit: initializing netlink socket (disabled)
[ 1.167625] type=2000 audit(1332578099.736:1): initialized
[ 1.181225] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.182428] VFS: Disk quotas dquot_6.5.2
[ 1.182457] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.182729] fuse init (API version 7.18)
[ 1.182777] msgmni has been set to 14896
[ 1.183041] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.183065] io scheduler noop registered
[ 1.183067] io scheduler deadline registered
[ 1.183094] io scheduler cfq registered (default)
[ 1.183171] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.183216] pcieport 0000:00:01.1: irq 41 for MSI/MSI-X
[ 1.183285] pcieport 0000:00:1c.0: irq 42 for MSI/MSI-X
[ 1.183374] pcieport 0000:00:1c.1: irq 43 for MSI/MSI-X
[ 1.183470] pcieport 0000:00:1c.2: irq 44 for MSI/MSI-X
[ 1.183558] pcieport 0000:00:1c.3: irq 45 for MSI/MSI-X
[ 1.183648] pcieport 0000:00:1c.4: irq 46 for MSI/MSI-X
[ 1.183737] pcieport 0000:00:1c.7: irq 47 for MSI/MSI-X
[ 1.183800] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 1.183804] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 1.183811] pcieport 0000:00:01.1: Signaling PME through PCIe PME interrupt
[ 1.183813] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.183816] pcie_pme 0000:00:01.1:pcie01: service driver pcie_pme loaded
[ 1.183830] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.183834] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 1.183848] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 1.183850] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 1.183855] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 1.183868] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 1.183870] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 1.183875] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 1.183887] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.183890] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 1.183894] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 1.183909] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 1.183911] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
[ 1.183916] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
[ 1.183928] pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
[ 1.183931] pci 0000:0a:00.0: Signaling PME through PCIe PME interrupt
[ 1.183935] pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
[ 1.183944] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.183956] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.183980] intel_idle: MWAIT substates: 0x1120
[ 1.183981] intel_idle: v0.4 model 0x2A
[ 1.183982] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.184036] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.184042] ACPI: Power Button [PWRB]
[ 1.184067] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.184070] ACPI: Power Button [PWRF]
[ 1.185549] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.186328] Linux agpgart interface v0.103
[ 1.186388] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.186498] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.187796] agpgart-intel 0000:00:00.0: detected 524288K stolen memory
[ 1.187887] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.188653] brd: module loaded
[ 1.189038] loop: module loaded
[ 1.189234] Fixed MDIO Bus: probed
[ 1.189244] tun: Universal TUN/TAP device driver, 1.6
[ 1.189246] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.189268] PPP generic driver version 2.4.2
[ 1.189321] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.189352] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.189355] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.189382] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.189404] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.193278] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.193291] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xfbf27000
[ 1.203431] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.203544] hub 1-0:1.0: USB hub found
[ 1.203548] hub 1-0:1.0: 2 ports detected
[ 1.203597] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.203600] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.203625] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.203645] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.207520] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.207523] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xfbf26000
[ 1.219420] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.219523] hub 2-0:1.0: USB hub found
[ 1.219526] hub 2-0:1.0: 2 ports detected
[ 1.219560] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.219566] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.219595] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.222388] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.222393] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.222457] mousedev: PS/2 mouse device common for all mice
[ 1.222536] rtc_cmos 00:04: RTC can wake from S4
[ 1.222618] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.222644] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.222689] device-mapper: uevent: version 1.0.3
[ 1.222728] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.222797] cpuidle: using governor ladder
[ 1.222892] cpuidle: using governor menu
[ 1.222894] EFI Variables Facility v0.08 2004-May-17
[ 1.223000] TCP cubic registered
[ 1.223060] NET: Registered protocol family 10
[ 1.223289] NET: Registered protocol family 17
[ 1.223300] Registering the dns_resolver key type
[ 1.223380] PM: Hibernation image not present or could not be loaded.
[ 1.223388] registered taskstats version 1
[ 1.228137] Magic number: 4:660:574
[ 1.228248] rtc_cmos 00:04: setting system clock to 2012-03-24 08:35:00 UTC (1332578100)
[ 1.229029] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.229032] EDD information not available.
[ 1.230023] Freeing unused kernel memory: 892k freed
[ 1.230095] Write protecting the kernel read-only data: 12288k
[ 1.233556] Freeing unused kernel memory: 1912k freed
[ 1.236083] Freeing unused kernel memory: 1352k freed
[ 1.247234] udevd[101]: starting version 173
[ 1.254569] wmi: Mapper loaded
[ 1.260974] [drm] Initialized drm 1.1.0 20060810
[ 1.261118] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 1.261123] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 1.261155] e1000e 0000:00:19.0: setting latency timer to 64
[ 1.261267] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 1.261328] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.261392] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 1.266953] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 1.319454] firewire_ohci: Added fw-ohci device 0000:09:02.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 1.319512] 8139cp 0000:09:00.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[ 1.320029] 8139too: 8139too Fast Ethernet driver 0.9.28
[ 1.322330] 8139too 0000:09:00.0: eth0: RealTek RTL8139 at 0xd000, 00:40:f4:51:8a:62, IRQ 18
[ 1.322550] xhci_hcd 0000:04:00.0: irq 17, io mem 0xfbd00000
[ 1.322643] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[ 1.322649] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
[ 1.322653] xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
[ 1.322656] xhci_hcd 0000:04:00.0: irq 52 for MSI/MSI-X
[ 1.322667] xhci_hcd 0000:04:00.0: irq 53 for MSI/MSI-X
[ 1.322671] xhci_hcd 0000:04:00.0: irq 54 for MSI/MSI-X
[ 1.322674] xhci_hcd 0000:04:00.0: irq 55 for MSI/MSI-X
[ 1.322678] xhci_hcd 0000:04:00.0: irq 56 for MSI/MSI-X
[ 1.322875] xHCI xhci_add_endpoint called for root hub
[ 1.322876] xHCI xhci_check_bandwidth called for root hub
[ 1.322896] hub 3-0:1.0: USB hub found
[ 1.322904] hub 3-0:1.0: 2 ports detected
[ 1.322946] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 1.322981] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 1.323048] xHCI xhci_add_endpoint called for root hub
[ 1.323050] xHCI xhci_check_bandwidth called for root hub
[ 1.323064] hub 4-0:1.0: USB hub found
[ 1.323071] hub 4-0:1.0: 2 ports detected
[ 1.347505] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.347613] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
[ 1.408736] xhci_hcd 0000:07:00.0: irq 16, io mem 0xfba00000
[ 1.408788] xhci_hcd 0000:07:00.0: irq 57 for MSI/MSI-X
[ 1.408791] xhci_hcd 0000:07:00.0: irq 58 for MSI/MSI-X
[ 1.408795] xhci_hcd 0000:07:00.0: irq 59 for MSI/MSI-X
[ 1.408798] xhci_hcd 0000:07:00.0: irq 60 for MSI/MSI-X
[ 1.408801] xhci_hcd 0000:07:00.0: irq 61 for MSI/MSI-X
[ 1.408804] xhci_hcd 0000:07:00.0: irq 62 for MSI/MSI-X
[ 1.408808] xhci_hcd 0000:07:00.0: irq 63 for MSI/MSI-X
[ 1.408812] xhci_hcd 0000:07:00.0: irq 64 for MSI/MSI-X
[ 1.409031] xHCI xhci_add_endpoint called for root hub
[ 1.409032] xHCI xhci_check_bandwidth called for root hub
[ 1.409056] hub 5-0:1.0: USB hub found
[ 1.409064] hub 5-0:1.0: 2 ports detected
[ 1.409099] xhci_hcd 0000:07:00.0: xHCI Host Controller
[ 1.409214] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
[ 1.409363] xHCI xhci_add_endpoint called for root hub
[ 1.409364] xHCI xhci_check_bandwidth called for root hub
[ 1.409388] hub 6-0:1.0: USB hub found
[ 1.409395] hub 6-0:1.0: 2 ports detected
[ 1.515274] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.562304] e1000e 0000:00:19.0: eth1: (PCI Express:2.5GT/s:Width x1) 14:da:e9:4f:94:94
[ 1.562308] e1000e 0000:00:19.0: eth1: Intel(R) PRO/1000 Network Connection
[ 1.562342] e1000e 0000:00:19.0: eth1: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 1.562423] ahci 0000:00:1f.2: version 3.0
[ 1.562490] ahci 0000:00:1f.2: irq 65 for MSI/MSI-X
[ 1.562558] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x22 impl SATA mode
[ 1.562562] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 1.562567] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.567598] scsi0 : ahci
[ 1.567740] scsi1 : ahci
[ 1.567872] scsi2 : ahci
[ 1.568020] scsi3 : ahci
[ 1.568164] scsi4 : ahci
[ 1.568313] scsi5 : ahci
[ 1.568415] ata1: DUMMY
[ 1.568418] ata2: SATA max UDMA/133 abar m2048@0xfbf25000 port 0xfbf25180 irq 65
[ 1.568420] ata3: DUMMY
[ 1.568421] ata4: DUMMY
[ 1.568422] ata5: DUMMY
[ 1.568425] ata6: SATA max UDMA/133 abar m2048@0xfbf25000 port 0xfbf25380 irq 65
[ 1.568496] i915 0000:00:02.0: setting latency timer to 64
[ 1.568571] ahci 0000:06:00.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 1.568579] ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 1.568897] scsi6 : ahci
[ 1.569006] scsi7 : ahci
[ 1.569047] ata7: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10100 irq 19
[ 1.569053] ata8: SATA max UDMA/133 abar m512@0xfbb10000 port 0xfbb10180 irq 19
[ 1.569746] ahci 0000:0a:00.0: irq 66 for MSI/MSI-X
[ 1.569800] ahci 0000:0a:00.0: AHCI 0001.0000 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.569804] ahci 0000:0a:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[ 1.569971] scsi8 : ahci
[ 1.570025] scsi9 : ahci
[ 1.570057] ata9: SATA max UDMA/133 abar m512@0xfb810000 port 0xfb810100 irq 66
[ 1.570061] ata10: SATA max UDMA/133 abar m512@0xfb810000 port 0xfb810180 irq 66
[ 1.618128] i915 0000:00:02.0: irq 67 for MSI/MSI-X
[ 1.618135] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.618139] [drm] Driver supports precise vblank timestamp query.
[ 1.618161] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.647863] hub 1-1:1.0: USB hub found
[ 1.647947] hub 1-1:1.0: 6 ports detected
[ 1.759094] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.823155] firewire_core: created device fw0: GUID 001fc6000017dc7a, S400
[ 1.887002] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.887040] ata9: SATA link down (SStatus 0 SControl 300)
[ 1.887052] ata8: SATA link down (SStatus 0 SControl 300)
[ 1.887066] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.887142] ata7: SATA link down (SStatus 0 SControl 300)
[ 1.887680] ata2.00: ATA-8: ST3000DM001-9YN166, CC9B, max UDMA/133
[ 1.887685] ata2.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.891683] hub 2-1:1.0: USB hub found
[ 1.891799] hub 2-1:1.0: 8 ports detected
[ 1.893441] ata6.00: ATA-7: SAMSUNG HD103UJ, 1AA01113, max UDMA7
[ 1.893445] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.899956] ata6.00: configured for UDMA/133
[ 1.912469] ata2.00: configured for UDMA/133
[ 1.912637] scsi 1:0:0:0: Direct-Access ATA ST3000DM001-9YN1 CC9B PQ: 0 ANSI: 5
[ 1.912766] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.912821] sd 1:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 1.912827] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.912884] sd 1:0:0:0: [sda] Write Protect is off
[ 1.912888] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.912909] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.912987] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5
[ 1.913105] sd 5:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.913124] sd 5:0:0:0: Attached scsi generic sg1 type 0
[ 1.913192] sd 5:0:0:0: [sdb] Write Protect is off
[ 1.913196] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.913229] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.955958] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
[ 1.956721] sd 5:0:0:0: [sdb] Attached SCSI disk
[ 1.963114] usb 1-1.1: new high-speed USB device number 3 using ehci_hcd
[ 1.984511] sda: sda1 sda2 sda3 sda4 sda5
[ 1.985198] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.058045] usbcore: registered new interface driver uas
[ 2.058889] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.062203] ata10.00: ATA-7: SAMSUNG HD160JJ, WU100-42, max UDMA/100
[ 2.062206] ata10.00: 312581808 sectors, multi 0: LBA48
[ 2.065503] ata10.00: configured for UDMA/100
[ 2.065610] scsi 9:0:0:0: Direct-Access ATA SAMSUNG HD160JJ WU10 PQ: 0 ANSI: 5
[ 2.065742] sd 9:0:0:0: Attached scsi generic sg2 type 0
[ 2.065745] sd 9:0:0:0: [sdc] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 2.065818] sd 9:0:0:0: [sdc] Write Protect is off
[ 2.065824] sd 9:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.065867] sd 9:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.076983] sdc: sdc1 sdc2
[ 2.077432] sd 9:0:0:0: [sdc] Attached SCSI disk
[ 2.078019] Initializing USB Mass Storage driver...
[ 2.078220] scsi10 : usb-storage 1-1.1:1.0
[ 2.078304] usbcore: registered new interface driver usb-storage
[ 2.078307] USB Mass Storage support registered.
[ 2.162815] Refined TSC clocksource calibration: 3411.128 MHz.
[ 2.162820] Switching to clocksource tsc
[ 2.165453] usb 2-1.1: new low-speed USB device number 3 using ehci_hcd
[ 2.209465] fbcon: inteldrmfb (fb0) is primary device
[ 2.263355] input: Logitech Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2
[ 2.263507] generic-usb 0003:046D:C018.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.1/input0
[ 2.263515] usbcore: registered new interface driver usbhid
[ 2.263515] usbhid: USB HID core driver
[ 2.330844] usb 2-1.2: new low-speed USB device number 4 using ehci_hcd
[ 2.436533] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input3
[ 2.436794] generic-usb 0003:03F0:0024.0002: input,hidraw1: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.2/input0
[ 2.489791] Console: switching to colour frame buffer device 240x67
[ 2.492781] fb0: inteldrmfb frame buffer device
[ 2.492782] drm: registered panic notifier
[ 2.493407] fixme: max PWM is zero.
[ 2.493478] acpi device:42: registered as cooling_device8
[ 2.493586] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 2.493715] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.493749] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.506758] usb 2-1.3: new low-speed USB device number 5 using ehci_hcd
[ 2.617294] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input5
[ 2.617607] generic-usb 0003:05A4:9881.0003: input,hidraw2: USB HID v1.10 Keyboard [HID 05a4:9881] on usb-0000:00:1d.0-1.3/input0
[ 2.642699] input: HID 05a4:9881 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input6
[ 2.642978] generic-usb 0003:05A4:9881.0004: input,hidraw3: USB HID v1.10 Mouse [HID 05a4:9881] on usb-0000:00:1d.0-1.3/input1
[ 2.714622] usb 2-1.7: new full-speed USB device number 6 using ehci_hcd
[ 3.086045] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: (null)
[ 3.203001] scsi 10:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 3.203991] sd 10:0:0:0: Attached scsi generic sg3 type 0
[ 3.895349] sd 10:0:0:0: [sdd] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB)
[ 3.896170] sd 10:0:0:0: [sdd] Write Protect is off
[ 3.896184] sd 10:0:0:0: [sdd] Mode Sense: 03 00 00 00
[ 3.897037] sd 10:0:0:0: [sdd] No Caching mode page present
[ 3.897052] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[ 3.900006] sd 10:0:0:0: [sdd] No Caching mode page present
[ 3.900021] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[ 3.912544] sdd: sdd1
[ 3.915207] sd 10:0:0:0: [sdd] No Caching mode page present
[ 3.915228] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[ 3.915250] sd 10:0:0:0: [sdd] Attached SCSI removable disk
[ 4.509609] init: ureadahead main process (371) terminated with status 5
[ 5.811612] udevd[408]: starting version 173
[ 6.284204] Adding 10485756k swap on /dev/sdb5. Priority:-1 extents:1 across:10485756k
[ 7.739778] lp: driver loaded but no devices found
[ 7.867372] cfg80211: Calling CRDA to update world regulatory domain
[ 8.164766] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.165058] mei 0000:00:16.0: setting latency timer to 64
[ 8.165103] mei 0000:00:16.0: irq 68 for MSI/MSI-X
[ 8.295618] asus_wmi: ASUS WMI generic driver loaded
[ 8.296095] asus_wmi: Initialization: 0x0
[ 8.296110] asus_wmi: BIOS WMI version: 0.9
[ 8.296132] asus_wmi: SFUN value: 0x0
[ 8.296293] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[ 8.296680] asus_wmi: Backlight controlled by ACPI video driver
[ 8.545923] WARNING: You are using an experimental version of the media stack.
[ 8.545924] As the driver is backported to an older kernel, it doesn't offer
[ 8.545925] enough quality for its usage in production.
[ 8.545925] Use it with care.
[ 8.545926] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 8.545926] a3db60bcf7671cc011ab4f848cbc40ff7ab52c1e [media] xc5000: declare firmware configuration structures as static const
[ 8.545927] 6fab81dfdc7b48c2e30ab05e9b30afb0c418bbbe [media] xc5000: drivers should specify chip revision rather than firmware
[ 8.545928] ddea427fb3e64d817d4432e5efd2abbfc4ddb02e [media] xc5000: remove static dependencies on xc5000 created by previous changesets
[ 8.612947] Digital Devices PCIE bridge driver, Copyright (C) 2010-11 Digital Devices GmbH
[ 8.612989] DDBridge driver detected: Digital Devices Octopus DVB adapter
[ 8.613025] HW 00010004 REG 00010001
[ 8.613083] DDBridge 0000:05:00.0: irq 69 for MSI/MSI-X
[ 8.613971] Port 0 (TAB 1): DUAL DVB-C/T
[ 8.614583] Port 1 (TAB 2): NO MODULE
[ 8.615211] Port 2 (TAB 3): NO MODULE
[ 8.615824] Port 3 (TAB 4): NO MODULE
[ 8.616000] DVB: registering new adapter (DDBridge)
[ 8.616001] DVB: registering new adapter (DDBridge)
[ 9.187157] drxk: status = 0x639130d9
[ 9.187175] drxk: detected a drx-3913k, spin A3, xtal 27.000 MHz
[ 9.739347] ath: EEPROM regdomain: 0x21
[ 9.739349] ath: EEPROM indicates we should expect a direct regpair map
[ 9.739352] ath: Country alpha2 being used: AU
[ 9.739353] ath: Regpair used: 0x21
.... cfg80211 deleted
[ 9.837901] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 9.838222] Registered led device: ath9k-phy0
[ 9.838226] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90005bc0000, irq=17
[ 9.838342] cfg80211: Pending regulatory request, waiting for it to be processed...
[ 9.840308] type=1400 audit(1332578109.112:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=556 comm="apparmor_parser"
[ 9.840337] type=1400 audit(1332578109.112:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=556 comm="apparmor_parser"
[ 9.840362] type=1400 audit(1332578109.112:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=556 comm="apparmor_parser"
[ 9.847432] type=1400 audit(1332578109.120:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=700 comm="apparmor_parser"
[ 9.847461] type=1400 audit(1332578109.120:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=700 comm="apparmor_parser"
[ 9.847485] type=1400 audit(1332578109.120:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=700 comm="apparmor_parser"
[ 9.867342] type=1400 audit(1332578109.140:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=706 comm="apparmor_parser"
[ 9.867370] type=1400 audit(1332578109.140:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=706 comm="apparmor_parser"
[ 9.867394] type=1400 audit(1332578109.140:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=706 comm="apparmor_parser"
[ 10.287627] type=1400 audit(1332578109.560:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=958 comm="apparmor_parser"
[ 10.318345] DRXK driver version 0.9.4300
[ 10.324221] drxk: frontend initialized.
.... cfg80211 deleted
[ 11.207593] snd_hda_intel 0000:00:1b.0: irq 70 for MSI/MSI-X
[ 11.716063] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.768641] e1000e 0000:00:19.0: irq 48 for MSI/MSI-X
[ 11.769083] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 11.774957] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 12.228930] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 12.229012] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 12.229044] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 12.235166] HDMI: detected monitor Philips FTV at connection type HDMI
[ 12.235167] HDMI: available speakers: FL/FR
[ 12.235169] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000 96000 176400, bits = 16 20 24
[ 12.235181] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[ 12.235183] HDMI: supports coding type MPEG1: channels = 2, rates = 32000 44100 48000, max bitrate = 1072000
[ 12.235239] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 12.235361] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 12.235463] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 12.235529] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 12.235604] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 12.235654] input: HDA Intel PCH Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 12.235715] input: HDA Intel PCH Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 12.235780] input: HDA Intel PCH Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 12.235836] input: HDA Intel PCH Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 12.236274] HDMI: detected monitor Philips FTV at connection type HDMI
[ 12.236276] HDMI: available speakers: FL/FR
[ 12.236279] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000 96000 176400, bits = 16 20 24
[ 12.236285] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[ 12.236288] HDMI: supports coding type MPEG1: channels = 2, rates = 32000 44100 48000, max bitrate = 1072000
[ 12.236292] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 12.236337] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 12.239836] HDMI: detected monitor Philips FTV at connection type HDMI
[ 12.239838] HDMI: available speakers: FL/FR
[ 12.239841] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000 96000 176400, bits = 16 20 24
[ 12.239843] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[ 12.239845] HDMI: supports coding type MPEG1: channels = 2, rates = 32000 44100 48000, max bitrate = 1072000
[ 12.293587] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 12.328573] DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
[ 12.337124] drxk: status = 0x639130d9
[ 12.337142] drxk: detected a drx-3913k, spin A3, xtal 27.000 MHz
[ 12.381461] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 12.756766] DRXK driver version 0.9.4300
[ 12.762657] drxk: frontend initialized.
[ 13.229483] 8139too 0000:09:00.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 14.175301] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro
[ 14.603155] DVB: registering adapter 1 frontend 0 (DRXK DVB-C DVB-T)...
[ 15.230851] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 15.355984] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 15.356344] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 18.716013] init: Failed to spawn network-manager main process: unable to execute: No such file or directory
[ 18.716514] init: modemmanager main process (1509) killed by TERM signal
[ 19.016718] ppdev: user-space parallel port driver
[ 19.497152] audit_printk_skb: 18 callbacks suppressed
[ 19.497154] type=1400 audit(1332578118.776:18): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1528 comm="apparmor_parser"
[ 19.497206] type=1400 audit(1332578118.776:19): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=1528 comm="apparmor_parser"
.... cfg80211 deleted
[ 23.412738] init: ssh main process (1426) terminated with status 255
[ 23.426752] init: failsafe main process (1405) killed by TERM signal
[ 23.776853] type=1400 audit(1332578123.060:20): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=1671 comm="apparmor_parser"
[ 23.804805] eth0: no IPv6 routers present
[ 23.807573] type=1400 audit(1332578123.088:21): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session-wrapper" pid=1664 comm="apparmor_parser"
[ 23.868179] type=1400 audit(1332578123.148:22): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1665 comm="apparmor_parser"
[ 23.868218] type=1400 audit(1332578123.148:23): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1665 comm="apparmor_parser"
[ 23.868258] type=1400 audit(1332578123.148:24): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1665 comm="apparmor_parser"
[ 23.884867] type=1400 audit(1332578123.168:25): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1672 comm="apparmor_parser"
[ 23.948072] type=1400 audit(1332578123.228:26): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld" pid=1670 comm="apparmor_parser"
[ 23.964977] type=1400 audit(1332578123.248:27): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1669 comm="apparmor_parser"
[ 25.723567] eth1: no IPv6 routers present
[ 26.669645] audit_printk_skb: 9 callbacks suppressed
[ 26.669647] type=1400 audit(1332578125.952:31): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1666 comm="apparmor_parser"
[ 26.669971] type=1400 audit(1332578125.952:32): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1666 comm="apparmor_parser"
[ 26.670147] type=1400 audit(1332578125.952:33): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1666 comm="apparmor_parser"
[ 27.290912] init: apport pre-start process (1720) terminated with status 1
[ 27.292191] init: apport post-stop process (1788) terminated with status 1
[ 27.299566] type=1400 audit(1332578126.584:34): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/mysqld" pid=1783 comm="apparmor_parser"
[ 27.381619] init: lightdm main process (1761) killed by TERM signal
[ 32.101387] wlan0: no IPv6 routers present
[ 48.141274] Bluetooth: Core ver 2.16
[ 48.141296] NET: Registered protocol family 31
[ 48.141297] Bluetooth: HCI device and connection manager initialized
[ 48.141298] Bluetooth: HCI socket layer initialized
[ 48.141299] Bluetooth: L2CAP socket layer initialized
[ 48.141302] Bluetooth: SCO socket layer initialized
[ 48.284495] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 48.284497] Bluetooth: BNEP filters: protocol multicast
[ 48.300637] Bluetooth: RFCOMM TTY layer initialized
[ 48.300640] Bluetooth: RFCOMM socket layer initialized
[ 48.300641] Bluetooth: RFCOMM ver 1.11
[ 60.259233] EXT4-fs (sdb7): re-mounted. Opts: errors=remount-ro,commit=0
[ 60.829198] EXT4-fs (sdb1): re-mounted. Opts: commit=0
[ 87.617757] init: plymouth-stop pre-start process (2680) terminated with status 1
[ 524.109641] init: mythtv-backend main process (1901) killed by TERM signal
[ 537.317601] input: eventlircd as /devices/virtual/input/input17
[ 537.405701] /home/angela/dev/sasc-ng/sc/contrib/sasc-ng/dvbloopback/module/dvb_loopback.c: frontend loopback driver v0.0.1
[ 537.405704] dvbloopback: registering 2 adapters
[ 537.405729] DVB: registering new adapter (DVB-LOOPBACK)
[ 537.406456] DVB: registering new adapter (DVB-LOOPBACK)
[ 663.812879] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[ 663.815205] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
[ 663.821719] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 791 at 785, next 792)
[ 663.825652] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=1
[ 663.825690] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 664.037996] ------------[ cut here ]------------
[ 664.038016] WARNING: at drivers/gpu/drm/i915/i915_gem.c:2397 i915_gem_object_put_fence+0xab/0xc0 [i915]()
[ 664.038018] Hardware name: System Product Name
[ 664.038019] Modules linked in: dvbloopback(O) rfcomm bnep bluetooth parport_pc ppdev binfmt_misc dm_crypt ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi tda18271c2dd(O) snd_rawmidi arc4 ath9k snd_seq_midi_event mac80211 snd_seq drxk(O) snd_timer snd_seq_device snd ddbridge(O) dvb_core(O) ath9k_common psmouse ath9k_hw ath eeepc_wmi asus_wmi sparse_keymap soundcore serio_raw snd_page_alloc cxd2099(O) mei(C) cfg80211 lp parport usbhid hid usb_storage uas 8139too mxm_wmi 8139cp firewire_ohci firewire_core crc_itu_t i915 ahci libahci drm_kms_helper xhci_hcd e1000e drm i2c_algo_bit video wmi
[ 664.038054] Pid: 3156, comm: Xorg Tainted: G C O 3.3.0-rc2-angela2+ #1
[ 664.038055] Call Trace:
[ 664.038061] [<ffffffff8104d21f>] warn_slowpath_common+0x7f/0xc0
[ 664.038064] [<ffffffff8104d27a>] warn_slowpath_null+0x1a/0x20
[ 664.038072] [<ffffffffa00db45b>] i915_gem_object_put_fence+0xab/0xc0 [i915]
[ 664.038079] [<ffffffffa00dce93>] i915_gem_object_unbind+0xa3/0x2d0 [i915]
[ 664.038090] [<ffffffffa002a117>] ? drm_mode_object_put+0x47/0x60 [drm]
[ 664.038097] [<ffffffffa00dd0f4>] i915_gem_free_object_tail+0x34/0x150 [i915]
[ 664.038105] [<ffffffffa00dff61>] i915_gem_free_object+0x51/0x60 [i915]
[ 664.038112] [<ffffffffa001fc9a>] drm_gem_object_free+0x2a/0x30 [drm]
[ 664.038121] [<ffffffffa00ed970>] intel_user_framebuffer_destroy+0x70/0x80 [i915]
[ 664.038129] [<ffffffffa002e613>] drm_fb_release+0x83/0xb0 [drm]
[ 664.038136] [<ffffffffa001f810>] drm_release+0x5e0/0x6e0 [drm]
[ 664.038139] [<ffffffff811753ca>] fput+0xea/0x220
[ 664.038141] [<ffffffff81171b36>] filp_close+0x66/0x90
[ 664.038143] [<ffffffff81050d38>] put_files_struct+0x88/0xf0
[ 664.038145] [<ffffffff81050e64>] exit_files+0x54/0x70
[ 664.038147] [<ffffffff8105134a>] do_exit+0x19a/0x8c0
[ 664.038150] [<ffffffff81051dd4>] do_group_exit+0x44/0xa0
[ 664.038152] [<ffffffff81051e47>] sys_exit_group+0x17/0x20
[ 664.038155] [<ffffffff816195e9>] system_call_fastpath+0x16/0x1b
[ 664.038156] ---[ end trace 5bed8a9786c4dd85 ]---
[ 664.092814] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 664.092870] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 664.392540] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 664.396233] HDMI: detected monitor Philips FTV at connection type HDMI
[ 664.396235] HDMI: available speakers: FL/FR
[ 664.396238] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000 96000 176400, bits = 16 20 24
[ 664.396241] HDMI: supports coding type AC-3: channels = 6, rates = 32000 44100 48000, max bitrate = 640000
[ 664.396243] HDMI: supports coding type MPEG1: channels = 2, rates = 32000 44100 48000, max bitrate = 1072000
[-- Attachment #3: intel_reg_dumper.txt --]
[-- Type: text/plain, Size: 12092 bytes --]
PGETBL_CTL: 0x00000000
GEN6_INSTDONE_1: 0x8989ff6f
GEN6_INSTDONE_2: 0xbffffffe
CPU_VGACNTRL: 0x80000000 (disabled)
DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000
RR_HW_CTL: 0x00000000 (low 0, high 0)
FDI_PLL_BIOS_0: 0xffffffff
FDI_PLL_BIOS_1: 0xffffffff
FDI_PLL_BIOS_2: 0xffffffff
DISPLAY_PORT_PLL_BIOS_0: 0xffffffff
DISPLAY_PORT_PLL_BIOS_1: 0xffffffff
DISPLAY_PORT_PLL_BIOS_2: 0xffffffff
FDI_PLL_FREQ_CTL: 0xffffffff
PIPEACONF: 0x00600000 (disabled, inactive, 8bpc)
HTOTAL_A: 0x0a4f077f (1920 active, 2640 total)
HBLANK_A: 0x0a4f077f (1920 start, 2640 end)
HSYNC_A: 0x09bb098f (2448 start, 2492 end)
VTOTAL_A: 0x04630437 (1080 active, 1124 total)
VBLANK_A: 0x04630437 (1080 start, 1124 end)
VSYNC_A: 0x0445043b (1084 start, 1094 end)
VSYNCSHIFT_A: 0x00000468
PIPEASRC: 0x077f0437 (1920, 1080)
PIPEA_DATA_M1: 0x7e1b30f0 (TU 64, val 0x1b30f0 1782000)
PIPEA_DATA_N1: 0x0020f580 (val 0x20f580 2160000)
PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
PIPEA_DATA_N2: 0x00000000 (val 0x0 0)
PIPEA_LINK_M1: 0x0001220a (val 0x1220a 74250)
PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)
PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
DSPACNTR: 0x58004000 (disabled)
DSPABASE: 0x00000000
DSPASTRIDE: 0x00001e00 (120)
DSPASURF: 0x00064000
DSPATILEOFF: 0x00000000 (0, 0)
PIPEBCONF: 0x00000000 (disabled, inactive, 8bpc)
HTOTAL_B: 0x00000000 (1 active, 1 total)
HBLANK_B: 0x00000000 (1 start, 1 end)
HSYNC_B: 0x00000000 (1 start, 1 end)
VTOTAL_B: 0x00000000 (1 active, 1 total)
VBLANK_B: 0x00000000 (1 start, 1 end)
VSYNC_B: 0x00000000 (1 start, 1 end)
VSYNCSHIFT_B: 0x00000000
DSPBCNTR: 0x00004000 (disabled)
DSPBBASE: 0x00000000
DSPBSTRIDE: 0x00000000 (0)
DSPBSURF: 0x00000000
DSPBTILEOFF: 0x00000000 (0, 0)
PIPEBSRC: 0x00000000 (1, 1)
PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
PIPEB_DATA_N1: 0x00000000 (val 0x0 0)
PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
PIPEB_DATA_N2: 0x00000000 (val 0x0 0)
PIPEB_LINK_M1: 0x00000000 (val 0x0 0)
PIPEB_LINK_N1: 0x00000000 (val 0x0 0)
PIPEB_LINK_M2: 0x00000000 (val 0x0 0)
PIPEB_LINK_N2: 0x00000000 (val 0x0 0)
PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
PFA_CTL_2: 0x00007ef2 (vscale 0.991760)
PFA_CTL_3: 0x00003f79 (vscale initial phase 0.495880)
PFA_CTL_4: 0x00007c40 (hscale 0.970703)
PFA_WIN_POS: 0x00000000 (0, 0)
PFA_WIN_SIZE: 0x00000000 (0, 0)
PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
PFB_CTL_2: 0x00000000 (vscale 0.000000)
PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000)
PFB_CTL_4: 0x00000000 (hscale 0.000000)
PFB_WIN_POS: 0x00000000 (0, 0)
PFB_WIN_SIZE: 0x00000000 (0, 0)
PCH_DREF_CONTROL: 0x00000400 (cpu source disable, ssc_source disable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 disable, ssc4 disable)
PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
PCH_DPLL_TMR_CFG: 0x0271186a
PCH_SSC4_PARMS: 0x01204860
PCH_SSC4_AUX_PARMS: 0x000029c5
PCH_DPLL_SEL: 0x00000000 (TransA DPLL disable (DPLL (null)), TransB DPLL disable (DPLL (null)))
PCH_DPLL_ANALOG_CTL: 0x00008000
PCH_DPLL_A: 0x44080008 (disable, sdvo high speed yes, mode (null), p2 (null), FPA0 P1 4, FPA1 P1 4, refclk default 120Mhz, sdvo/hdmi mul 1)
PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1)
PCH_FPA0: 0x00021007 (n = 2, m1 = 16, m2 = 7)
PCH_FPA1: 0x00021007 (n = 2, m1 = 16, m2 = 7)
PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
TRANS_HTOTAL_A: 0x0a4f077f (1920 active, 2640 total)
TRANS_HBLANK_A: 0x0a4f077f (1920 start, 2640 end)
TRANS_HSYNC_A: 0x09bb098f (2448 start, 2492 end)
TRANS_VTOTAL_A: 0x04630437 (1080 active, 1124 total)
TRANS_VBLANK_A: 0x04630437 (1080 start, 1124 end)
TRANS_VSYNC_A: 0x0445043b (1084 start, 1094 end)
TRANS_VSYNCSHIFT_A: 0x00000468
TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
TRANSA_DATA_N1: 0x00000000 (val 0x0 0)
TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
TRANSA_DATA_N2: 0x00000000 (val 0x0 0)
TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)
TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)
TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)
TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)
TRANS_HTOTAL_B: 0x00000000 (1 active, 1 total)
TRANS_HBLANK_B: 0x00000000 (1 start, 1 end)
TRANS_HSYNC_B: 0x00000000 (1 start, 1 end)
TRANS_VTOTAL_B: 0x00000000 (1 active, 1 total)
TRANS_VBLANK_B: 0x00000000 (1 start, 1 end)
TRANS_VSYNC_B: 0x00000000 (1 start, 1 end)
TRANS_VSYNCSHIFT_B: 0x00000000
TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
TRANSB_DATA_N1: 0x00000000 (val 0x0 0)
TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
TRANSB_DATA_N2: 0x00000000 (val 0x0 0)
TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)
TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)
TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)
TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)
TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)
TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)
TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)
TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)
TRANS_VBLANK_C: 0x00000000 (1 start, 1 end)
TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)
TRANS_VSYNCSHIFT_C: 0x00000000
TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
TRANSC_DATA_N1: 0x00000000 (val 0x0 0)
TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
TRANSC_DATA_N2: 0x00000000 (val 0x0 0)
TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)
TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)
TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)
TRANSC_DP_LINK_N2: 0x00000000 (val 0x0 0)
TRANSACONF: 0x00600000 (disable, inactive)
TRANSBCONF: 0x00000000 (disable, inactive)
TRANSCCONF: 0x00000000 (disable, inactive)
FDI_TXA_CTL: 0x00040000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing enable, FDI PLL disable, scrambing enable, master mode disable)
FDI_TXB_CTL: 0x00040000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing enable, FDI PLL disable, scrambing enable, master mode disable)
FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable)
FDI_RXA_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
FDI_RXC_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
FDI_RXA_MISC: 0x00000080 (FDI Delay 128)
FDI_RXB_MISC: 0x00000080 (FDI Delay 128)
FDI_RXC_MISC: 0x00000080 (FDI Delay 128)
FDI_RXA_TUSIZE1: 0x7e000000
FDI_RXA_TUSIZE2: 0x7e000000
FDI_RXB_TUSIZE1: 0x7e000000
FDI_RXB_TUSIZE2: 0x7e000000
FDI_RXC_TUSIZE1: 0x7e000000
FDI_RXC_TUSIZE2: 0x7e000000
FDI_PLL_CTL_1: 0x7e000000
FDI_PLL_CTL_2: 0x7e000000
FDI_RXA_IIR: 0x00000000
FDI_RXA_IMR: 0x000008ff
FDI_RXB_IIR: 0x00000000
FDI_RXB_IMR: 0x000008ff
PCH_ADPA: 0x00f40000 (disabled, transcoder A, -hsync, -vsync)
HDMIB: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
HDMIC: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
HDMID: 0x00000a9c (disabled pipe A 8bpc TMDS HDMI audio disabled +vsync +hsync detected)
PCH_LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1 channel)
CPU_eDP_A: 0x00000018
PCH_DP_B: 0x00000004
PCH_DP_C: 0x00000004
PCH_DP_D: 0x00000004
TRANS_DP_CTL_A: 0x60000018 (disable port none 8bpc +vsync +hsync)
TRANS_DP_CTL_B: 0x60000018 (disable port none 8bpc +vsync +hsync)
TRANS_DP_CTL_C: 0x60000018 (disable port none 8bpc +vsync +hsync)
BLC_PWM_CPU_CTL2: 0x00000000
BLC_PWM_CPU_CTL: 0x00000000
BLC_PWM_PCH_CTL1: 0x00000000
BLC_PWM_PCH_CTL2: 0x00000000
PCH_PP_STATUS: 0x00000000 (off, not ready, sequencing idle)
PCH_PP_CONTROL: 0xabcd0000 (blacklight disabled, do not power down on reset, panel off)
PCH_PP_ON_DELAYS: 0x00000000
PCH_PP_OFF_DELAYS: 0x00000000
PCH_PP_DIVISOR: 0x00186904
PORT_DBG: 0x00000000 (HW DRRS off)
RC6_RESIDENCY_TIME: 0x016c6ec0
RC6p_RESIDENCY_TIME: 0x00000000
RC6pp_RESIDENCY_TIME: 0x00000000
[-- Attachment #4: run.log --]
[-- Type: application/octet-stream, Size: 8712 bytes --]
2012-03-24 09:45:29.355765 I Trying the OpenGL painter
>>>>>>>>>> 09:45:29.357931 W OpenGL: Could not determine whether Sync to VBlank is enabled.
2012-03-24 09:45:29.406436 I OpenGL1: Fragment program support available
2012-03-24 09:45:29.406465 I OpenGL: OpenGL vendor : Tungsten Graphics, Inc
2012-03-24 09:45:29.406471 I OpenGL: OpenGL renderer: Mesa DRI Intel(R) Sandybridge Desktop
2012-03-24 09:45:29.406473 I OpenGL: OpenGL version : 3.0 Mesa 8.0.2
2012-03-24 09:45:29.406479 I OpenGL: Max texture size: 8192 x 8192
2012-03-24 09:45:29.406481 I OpenGL: Max texture units: 8
2012-03-24 09:45:29.406490 I OpenGL: Direct rendering: Yes
2012-03-24 09:45:29.406492 I OpenGL: PixelBufferObject support available
2012-03-24 09:45:29.406494 I OpenGL: Initialised MythRenderOpenGL
2012-03-24 09:45:30.521450 I Current MythTV Schema Version (DBSchemaVer): 1299
2012-03-24 09:45:34.553576 W ThemeInfo: Unable to open themeinfo.xml for /usr/share/mythtv/themes/BlackCurves-OSD/themeinfo.xml
2012-03-24 09:45:34.553592 E ThemeInfo: The theme (/usr/share/mythtv/themes/BlackCurves-OSD) is missing a themeinfo.xml file.
2012-03-24 09:45:34.634376 W ThemeInfo: Unable to open themeinfo.xml for /usr/share/mythtv/themes/Gray-OSD/themeinfo.xml
2012-03-24 09:45:34.634399 E ThemeInfo: The theme (/usr/share/mythtv/themes/Gray-OSD) is missing a themeinfo.xml file.
2012-03-24 09:45:34.825587 W Key Esc is bound to multiple actions in context Main Menu.
2012-03-24 09:45:34.876631 N Registering Internal as a media playback plugin.
2012-03-24 09:45:34.983836 A MMUnix:CheckMountable: DBus interface error:
2012-03-24 09:45:35.567061 N Registering WebBrowser as a media playback plugin.
2012-03-24 09:45:35.581452 I Loading en_us translation for module mythbrowser
2012-03-24 09:45:35.642208 I Loading en_us translation for module mythgallery
2012-03-24 09:45:35.758057 I Current MythMusic Schema Version (MusicDBSchemaVer): 1019
2012-03-24 09:45:35.789511 I Loading en_us translation for module mythmusic
2012-03-24 09:45:35.824172 I Loading en_us translation for module mythnetvision
2012-03-24 09:45:35.849844 I Loading en_us translation for module mythnews
2012-03-24 09:45:35.898026 I Starting update of yrno-XML
2012-03-24 09:45:35.924495 I Loading en_us translation for module mythweather
2012-03-24 09:45:36.226504 N Found mainmenu.xml for theme 'Arclight'
2012-03-24 09:45:37.684723 I Database connection created: DBManager3
2012-03-24 09:45:37.684737 I New DB connection, total: 3
2012-03-24 09:45:37.685413 I Connected to database 'mythconverg' at host: localhost
2012-03-24 09:45:37.702725 I MythCoreContext: Connecting to backend server: 127.0.0.1:6543 (try 1 of 1)
2012-03-24 09:45:37.703808 I Using protocol version 72
2012-03-24 09:45:37.834183 I Bonjour: Service registration complete: name 'Mythfrontend on minerva11' type '_mythfrontend._tcp.' domain: 'local.'
2012-03-24 09:45:39.532061 E script exit status 255
2012-03-24 09:45:49.635413 I Database connection created: DBManager4
2012-03-24 09:45:49.635464 I New DB connection, total: 4
2012-03-24 09:45:49.635525 I Database connection created: DBManager5
2012-03-24 09:45:49.635548 I New DB connection, total: 5
2012-03-24 09:45:49.635805 I Connected to database 'mythconverg' at host: localhost
2012-03-24 09:45:49.635848 I Connected to database 'mythconverg' at host: localhost
2012-03-24 09:45:49.942064 E PlaybackBoxHelper: CHECK_AVAILABILITY 'myth://[::1]:6543/10005_20120323210000.mpg' file not found
2012-03-24 09:45:49.943009 E PlaybackBoxHelper: CHECK_AVAILABILITY 'myth://[::1]:6543/1002_20120323193000.mpg' file not found
2012-03-24 09:45:49.945526 E PlaybackBoxHelper: CHECK_AVAILABILITY 'myth://[::1]:6543/10005_20120323210000.mpg' file not found
2012-03-24 09:45:49.946489 E PlaybackBoxHelper: CHECK_AVAILABILITY 'myth://[::1]:6543/1002_20120323193000.mpg' file not found
2012-03-24 09:45:49.951683 E PlaybackBoxHelper: CHECK_AVAILABILITY 'myth://[::1]:6543/10005_20120323210000.mpg' file not found
2012-03-24 09:45:49.952522 E PlaybackBoxHelper: CHECK_AVAILABILITY 'myth://[::1]:6543/1002_20120323193000.mpg' file not found
2012-03-24 09:45:51.799037 E PlaybackBoxHelper: CHECK_AVAILABILITY 'myth://[::1]:6543/10005_20120323210000.mpg' file not found
2012-03-24 09:45:52.126766 E PlaybackBoxHelper: CHECK_AVAILABILITY 'myth://[::1]:6543/1002_20120323193000.mpg' file not found
2012-03-24 09:45:55.788134 I TV: Creating TV object
2012-03-24 09:45:55.836203 N Resuming idle timer
2012-03-24 09:45:55.836876 N Suspending idle timer
2012-03-24 09:45:55.838507 I TV: Created TvPlayWindow.
2012-03-24 09:45:55.888824 I TV: Attempting to change from None to WatchingPreRecorded
2012-03-24 09:45:56.614501 I Pulse: PulseAudio suspend OK
2012-03-24 09:45:56.625685 N AudioPlayer: Enabling Audio
>>>>>>>>>>
libva: VA-API version 0.32.0
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib/dri/i965_drv_video.so
libva: va_openDriver() returns 0
2012-03-24 09:45:57.038086 I VAAPI: Version: 0.32
2012-03-24 09:45:57.038093 I VAAPI: Driver : i965 Driver 0.1
2012-03-24 09:45:57.076115 I VAAPI: Profile: MPEG2Simple Entrypoints: VLD
2012-03-24 09:45:57.076124 I VAAPI: Profile: MPEG2Main Entrypoints: VLD
2012-03-24 09:45:57.076130 I VAAPI: Profile: H264Base Entrypoints: VLD
2012-03-24 09:45:57.076135 I VAAPI: Profile: H264Main Entrypoints: VLD
2012-03-24 09:45:57.076139 I VAAPI: Profile: H264High Entrypoints: VLD
2012-03-24 09:45:57.076143 I VAAPI: Profile: VC1Simple Entrypoints: VLD
2012-03-24 09:45:57.076147 I VAAPI: Profile: VC1Main Entrypoints: VLD
2012-03-24 09:45:57.076151 I VAAPI: Profile: VC1Advanced Entrypoints: VLD
2012-03-24 09:45:57.076782 I AFD: Opened codec 0x46e98a0, id(MPEG2VIDEO) type(Video)
2012-03-24 09:45:57.076791 I AFD: codec MP2 has 2 channels
2012-03-24 09:45:57.076809 I AFD: Opened codec 0x46ea120, id(MP2) type(Audio)
2012-03-24 09:45:57.076846 I AFD: codec MP2 has 2 channels
2012-03-24 09:45:57.076865 I AFD: Opened codec 0x46e4f80, id(MP2) type(Audio)
2012-03-24 09:45:57.122393 I AO: Opening audio device 'hdmi:CARD=PCH,DEV=1' ch 2(2) sr 48000 sf signed 16 bit reenc 0
GetModeLine - scrn: 0 clock: 74250
GetModeLine - hdsp: 1920 hbeg: 2448 hend: 2492 httl: 2640
vdsp: 1080 vbeg: 1084 vend: 1094 vttl: 1125 flags: 21
>>>>>>>>>>
libva: VA-API version 0.32.0
libva: va_getDriverName() returns 0
libva: Trying to open /usr/lib/dri/i965_drv_video.so
libva: va_openDriver() returns 0
2012-03-24 09:45:57.244130 I GLVid: Using raw RGBA input textures.
2012-03-24 09:45:57.246600 I OSD: Base theme size: 1920x1080
2012-03-24 09:45:57.246636 I OSD: Scaling factors: 1x1
GetModeLine - scrn: 0 clock: 74250
GetModeLine - hdsp: 1920 hbeg: 2448 hend: 2492 httl: 2640
vdsp: 1080 vbeg: 1084 vend: 1094 vttl: 1125 flags: 21
GetModeLine - scrn: 0 clock: 74250
GetModeLine - hdsp: 1920 hbeg: 2448 hend: 2492 httl: 2640
vdsp: 1080 vbeg: 1084 vend: 1094 vttl: 1125 flags: 21
2012-03-24 09:45:57.506761 I OSD: Base theme size: 1920x1080
2012-03-24 09:45:57.506769 I OSD: Scaling factors: 1x1
2012-03-24 09:45:57.534698 I Player(0): Video timing method: DRM
2012-03-24 09:45:57.555155 I TV: Created player.
2012-03-24 09:45:57.555504 I TV: Changing from None to WatchingPreRecorded
2012-03-24 09:45:57.566920 I TV: Main UI disabled.
2012-03-24 09:45:57.566937 I TV: Entering main playback loop.
2012-03-24 09:45:57.570419 I ScreenSaverX11Private: DPMS Deactivated 1
>>>>>>>>>>
(WW) intel(0): flip queue failed: Input/output error
(WW) intel(0): Page flip failed: Input/output error
(WW) intel(0): divisor 0 get vblank counter failed: Invalid argument
(EE) intel(0): Detected a hung GPU, disabling acceleration.
(EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg.
intel_do_flush_locked failed: Input/output error
/usr/bin/xinit: connection to X server lost
waiting for X server to shut down (II) evdev: Power Button: Close
(II) UnloadModule: "evdev"
(II) Unloading evdev
(II) evdev: Video Bus: Close
(II) UnloadModule: "evdev"
(II) Unloading evdev
(II) evdev: Power Button: Close
(II) UnloadModule: "evdev"
(II) Unloading evdev
(II) evdev: Logitech Logitech USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Unloading evdev
(II) evdev: CHICONY HP Basic USB Keyboard: Close
(II) UnloadModule: "evdev"
(II) Unloading evdev
(II) evdev: Eee PC WMI hotkeys: Close
(II) UnloadModule: "evdev"
(II) Unloading evdev
ddxSigGiveUp: Closing log
Server terminated successfully (0). Closing log file.
[-- Attachment #5: Xorg.11.log --]
[-- Type: application/octet-stream, Size: 39723 bytes --]
[ 624.296]
X.Org X Server 1.11.2.902 (1.11.3 RC 2)
Release Date: 2011-12-09
[ 624.296] X Protocol Version 11, Revision 0
[ 624.296] Build Operating System: Linux 2.6.24-30-xen x86_64 Ubuntu
[ 624.296] Current Operating System: Linux minerva11 3.3.0-rc2-angela2+ #1 SMP Tue Feb 14 13:17:34 CET 2012 x86_64
[ 624.296] Kernel command line: BOOT_IMAGE=/vmlinuz-3.3.0-rc2-angela2+ root=UUID=cfc15d9c-2cd1-4bad-9e9d-f2fa1ded76e2 ro
[ 624.296] Build Date: 10 December 2011 08:30:20PM
[ 624.296] xorg-server 2:1.11.2.902+git20111209+server-1.11-branch.0ca8869e-0ubuntu0sarvatt~oneiric (For technical support please see http://www.ubuntu.com/support)
[ 624.296] Current version of pixman: 0.25.2
[ 624.297] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 624.297] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 624.297] (==) Log file: "/var/log/Xorg.11.log", Time: Sat Mar 24 09:45:24 2012
[ 624.297] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 624.297] (==) No Layout section. Using the first Screen section.
[ 624.297] (==) No screen section available. Using defaults.
[ 624.297] (**) |-->Screen "Default Screen Section" (0)
[ 624.297] (**) | |-->Monitor "<default monitor>"
[ 624.297] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 624.297] (==) Automatically adding devices
[ 624.297] (==) Automatically enabling devices
[ 624.297] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 624.297] Entry deleted from font path.
[ 624.297] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 624.297] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 624.297] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 624.297] (II) Loader magic: 0x7ceae0
[ 624.297] (II) Module ABI versions:
[ 624.297] X.Org ANSI C Emulation: 0.4
[ 624.297] X.Org Video Driver: 11.0
[ 624.297] X.Org XInput driver : 13.0
[ 624.297] X.Org Server Extension : 6.0
[ 624.298] (--) PCI:*(0:0:2:0) 8086:0122:1043:844d rev 9, Mem @ 0xfb400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 624.298] (II) Open ACPI successful (/var/run/acpid.socket)
[ 624.298] (II) LoadModule: "extmod"
[ 624.298] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 624.298] (II) Module extmod: vendor="X.Org Foundation"
[ 624.299] compiled for 1.11.2.902, module version = 1.0.0
[ 624.299] Module class: X.Org Server Extension
[ 624.299] ABI class: X.Org Server Extension, version 6.0
[ 624.299] (II) Loading extension MIT-SCREEN-SAVER
[ 624.299] (II) Loading extension XFree86-VidModeExtension
[ 624.299] (II) Loading extension XFree86-DGA
[ 624.299] (II) Loading extension DPMS
[ 624.299] (II) Loading extension XVideo
[ 624.299] (II) Loading extension XVideo-MotionCompensation
[ 624.299] (II) Loading extension X-Resource
[ 624.299] (II) LoadModule: "dbe"
[ 624.299] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 624.299] (II) Module dbe: vendor="X.Org Foundation"
[ 624.299] compiled for 1.11.2.902, module version = 1.0.0
[ 624.299] Module class: X.Org Server Extension
[ 624.299] ABI class: X.Org Server Extension, version 6.0
[ 624.299] (II) Loading extension DOUBLE-BUFFER
[ 624.299] (II) LoadModule: "glx"
[ 624.299] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 624.299] (II) Module glx: vendor="X.Org Foundation"
[ 624.299] compiled for 1.11.2.902, module version = 1.0.0
[ 624.299] ABI class: X.Org Server Extension, version 6.0
[ 624.299] (==) AIGLX enabled
[ 624.299] (II) Loading extension GLX
[ 624.299] (II) LoadModule: "record"
[ 624.299] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 624.299] (II) Module record: vendor="X.Org Foundation"
[ 624.299] compiled for 1.11.2.902, module version = 1.13.0
[ 624.299] Module class: X.Org Server Extension
[ 624.299] ABI class: X.Org Server Extension, version 6.0
[ 624.299] (II) Loading extension RECORD
[ 624.299] (II) LoadModule: "dri"
[ 624.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 624.300] (II) Module dri: vendor="X.Org Foundation"
[ 624.300] compiled for 1.11.2.902, module version = 1.0.0
[ 624.300] ABI class: X.Org Server Extension, version 6.0
[ 624.300] (II) Loading extension XFree86-DRI
[ 624.300] (II) LoadModule: "dri2"
[ 624.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 624.300] (II) Module dri2: vendor="X.Org Foundation"
[ 624.300] compiled for 1.11.2.902, module version = 1.2.0
[ 624.300] ABI class: X.Org Server Extension, version 6.0
[ 624.300] (II) Loading extension DRI2
[ 624.300] (==) Matched intel as autoconfigured driver 0
[ 624.300] (==) Matched vesa as autoconfigured driver 1
[ 624.300] (==) Matched fbdev as autoconfigured driver 2
[ 624.300] (==) Assigned the driver to the xf86ConfigLayout
[ 624.300] (II) LoadModule: "intel"
[ 624.301] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 624.301] (II) Module intel: vendor="X.Org Foundation"
[ 624.301] compiled for 1.11.2.902, module version = 2.18.0
[ 624.301] Module class: X.Org Video Driver
[ 624.301] ABI class: X.Org Video Driver, version 11.0
[ 624.301] (II) LoadModule: "vesa"
[ 624.301] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 624.301] (II) Module vesa: vendor="X.Org Foundation"
[ 624.301] compiled for 1.11.2, module version = 2.3.0
[ 624.301] Module class: X.Org Video Driver
[ 624.301] ABI class: X.Org Video Driver, version 11.0
[ 624.301] (II) LoadModule: "fbdev"
[ 624.301] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 624.301] (II) Module fbdev: vendor="X.Org Foundation"
[ 624.301] compiled for 1.11.2, module version = 0.4.2
[ 624.301] Module class: X.Org Video Driver
[ 624.301] ABI class: X.Org Video Driver, version 11.0
[ 624.301] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 624.302] (II) VESA: driver for VESA chipsets: vesa
[ 624.303] (II) FBDEV: driver for framebuffer: fbdev
[ 624.303] (++) using VT number 8
[ 624.304] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 624.304] (WW) Falling back to old probe method for vesa
[ 624.304] (WW) Falling back to old probe method for fbdev
[ 624.304] (II) Loading sub module "fbdevhw"
[ 624.304] (II) LoadModule: "fbdevhw"
[ 624.304] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 624.304] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 624.304] compiled for 1.11.2.902, module version = 0.0.2
[ 624.304] ABI class: X.Org Video Driver, version 11.0
[ 624.304] drmOpenDevice: node name is /dev/dri/card0
[ 624.304] drmOpenDevice: open result is 11, (OK)
[ 624.304] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 624.304] drmOpenDevice: node name is /dev/dri/card0
[ 624.304] drmOpenDevice: open result is 11, (OK)
[ 624.304] drmOpenByBusid: drmOpenMinor returns 11
[ 624.304] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 624.304] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 624.304] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 624.305] (==) intel(0): RGB weight 888
[ 624.305] (==) intel(0): Default visual is TrueColor
[ 624.305] (II) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Desktop (GT2+)
[ 624.305] (--) intel(0): Chipset: "Sandybridge Desktop (GT2+)"
[ 624.305] (**) intel(0): Relaxed fencing enabled
[ 624.305] (**) intel(0): Wait on SwapBuffers? enabled
[ 624.305] (**) intel(0): Triple buffering? enabled
[ 624.305] (**) intel(0): Framebuffer tiled
[ 624.305] (**) intel(0): Pixmaps tiled
[ 624.305] (**) intel(0): 3D buffers tiled
[ 624.305] (**) intel(0): SwapBuffers wait enabled
[ 624.305] (==) intel(0): video overlay key set to 0x101fe
[ 624.305] (II) intel(0): Output VGA1 has no monitor section
[ 624.327] (II) intel(0): Output HDMI1 has no monitor section
[ 624.376] (II) intel(0): Output DP1 has no monitor section
[ 624.398] (II) intel(0): Output HDMI2 has no monitor section
[ 624.638] (II) intel(0): Output HDMI3 has no monitor section
[ 624.688] (II) intel(0): Output DP2 has no monitor section
[ 624.736] (II) intel(0): Output DP3 has no monitor section
[ 624.736] (II) intel(0): EDID for output VGA1
[ 624.758] (II) intel(0): EDID for output HDMI1
[ 624.808] (II) intel(0): EDID for output DP1
[ 624.830] (II) intel(0): EDID for output HDMI2
[ 625.068] (II) intel(0): EDID for output HDMI3
[ 625.068] (II) intel(0): Manufacturer: PHL Model: 0 Serial#: 16843009
[ 625.068] (II) intel(0): Year: 1990 Week: 0
[ 625.068] (II) intel(0): EDID Version: 1.3
[ 625.068] (II) intel(0): Digital Display Input
[ 625.068] (II) intel(0): Max Image Size [cm]: horiz.: 64 vert.: 36
[ 625.068] (II) intel(0): Gamma: 2.20
[ 625.068] (II) intel(0): No DPMS capabilities specified
[ 625.068] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 625.068] (II) intel(0): First detailed timing is preferred mode
[ 625.068] (II) intel(0): redX: 0.640 redY: 0.330 greenX: 0.290 greenY: 0.600
[ 625.068] (II) intel(0): blueX: 0.150 blueY: 0.060 whiteX: 0.289 whiteY: 0.299
[ 625.068] (II) intel(0): Supported established timings:
[ 625.068] (II) intel(0): 640x480@60Hz
[ 625.068] (II) intel(0): 800x600@60Hz
[ 625.068] (II) intel(0): 1024x768@60Hz
[ 625.068] (II) intel(0): Manufacturer's mask: 0
[ 625.068] (II) intel(0): Supported detailed timing:
[ 625.068] (II) intel(0): clock: 74.2 MHz Image Size: 640 x 360 mm
[ 625.068] (II) intel(0): h_active: 1920 h_sync: 2448 h_sync_end 2492 h_blank_end 2640 h_border: 0
[ 625.068] (II) intel(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 625.068] (II) intel(0): Supported detailed timing:
[ 625.068] (II) intel(0): clock: 74.2 MHz Image Size: 640 x 360 mm
[ 625.068] (II) intel(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 625.068] (II) intel(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
[ 625.068] (II) intel(0): Monitor name: Philips FTV
[ 625.068] (II) intel(0): Ranges: V min: 48 V max: 62 Hz, H min: 15 H max: 50 kHz, PixClock max 95 MHz
[ 625.068] (II) intel(0): Supported detailed timing:
[ 625.068] (II) intel(0): clock: 74.2 MHz Image Size: 640 x 360 mm
[ 625.068] (II) intel(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
[ 625.068] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 625.068] (II) intel(0): Supported detailed timing:
[ 625.068] (II) intel(0): clock: 74.2 MHz Image Size: 640 x 360 mm
[ 625.068] (II) intel(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
[ 625.068] (II) intel(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
[ 625.068] (II) intel(0): Supported detailed timing:
[ 625.068] (II) intel(0): clock: 27.0 MHz Image Size: 640 x 360 mm
[ 625.068] (II) intel(0): h_active: 720 h_sync: 732 h_sync_end 796 h_blank_end 864 h_border: 0
[ 625.068] (II) intel(0): v_active: 576 v_sync: 581 v_sync_end 586 v_blanking: 625 v_border: 0
[ 625.068] (II) intel(0): Supported detailed timing:
[ 625.068] (II) intel(0): clock: 27.0 MHz Image Size: 640 x 360 mm
[ 625.068] (II) intel(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
[ 625.069] (II) intel(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
[ 625.069] (II) intel(0): Number of EDID sections to follow: 1
[ 625.069] (II) intel(0): EDID (in hex):
[ 625.069] (II) intel(0): 00ffffffffffff00410c000001010101
[ 625.069] (II) intel(0): 00000103804024780ae692a3544a9926
[ 625.069] (II) intel(0): 0f4a4c21080001010101010101010101
[ 625.069] (II) intel(0): 010101010101011d80d0721c1620102c
[ 625.069] (II) intel(0): 258080682100009e011d8018711c1620
[ 625.069] (II) intel(0): 582c250080682100009e000000fc0050
[ 625.069] (II) intel(0): 68696c697073204654560a20000000fd
[ 625.069] (II) intel(0): 00303e0f3209000a20202020202001e3
[ 625.069] (II) intel(0): 020324f04b0103040506071213141516
[ 625.069] (II) intel(0): 29091f07150750190786830100006503
[ 625.069] (II) intel(0): 0c002000011d00bc52d01e20b8285540
[ 625.069] (II) intel(0): 80682100001e011d007251d01e206e28
[ 625.069] (II) intel(0): 550080682100001e8c0ad09020403120
[ 625.069] (II) intel(0): 0c4055008068210000188c0ad08a20e0
[ 625.069] (II) intel(0): 2d10103e960080682100001800000000
[ 625.069] (II) intel(0): 0000000000000000000000000000002a
[ 625.069] (II) intel(0): Printing probed modes for output HDMI3
[ 625.069] (II) intel(0): Modeline "1920x1080"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[ 625.069] (II) intel(0): Modeline "1920x1080"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[ 625.069] (II) intel(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 625.069] (II) intel(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 625.069] (II) intel(0): Modeline "1440x576"x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz)
[ 625.069] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 625.069] (II) intel(0): Modeline "1440x480"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[ 625.069] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 625.069] (II) intel(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 625.069] (II) intel(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 625.069] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 625.069] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 625.116] (II) intel(0): EDID for output DP2
[ 625.164] (II) intel(0): EDID for output DP3
[ 625.164] (II) intel(0): Output VGA1 disconnected
[ 625.164] (II) intel(0): Output HDMI1 disconnected
[ 625.164] (II) intel(0): Output DP1 disconnected
[ 625.164] (II) intel(0): Output HDMI2 disconnected
[ 625.164] (II) intel(0): Output HDMI3 connected
[ 625.164] (II) intel(0): Output DP2 disconnected
[ 625.164] (II) intel(0): Output DP3 disconnected
[ 625.164] (II) intel(0): Using exact sizes for initial modes
[ 625.164] (II) intel(0): Output HDMI3 using initial mode 1920x1080
[ 625.164] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 625.164] (II) intel(0): Kernel page flipping support detected, enabling
[ 625.164] (==) intel(0): DPI set to (96, 96)
[ 625.164] (II) Loading sub module "fb"
[ 625.164] (II) LoadModule: "fb"
[ 625.164] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 625.164] (II) Module fb: vendor="X.Org Foundation"
[ 625.164] compiled for 1.11.2.902, module version = 1.0.0
[ 625.164] ABI class: X.Org ANSI C Emulation, version 0.4
[ 625.164] (II) Loading sub module "dri2"
[ 625.164] (II) LoadModule: "dri2"
[ 625.164] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 625.164] (II) Module dri2: vendor="X.Org Foundation"
[ 625.164] compiled for 1.11.2.902, module version = 1.2.0
[ 625.164] ABI class: X.Org Server Extension, version 6.0
[ 625.164] (II) UnloadModule: "vesa"
[ 625.165] (II) Unloading vesa
[ 625.165] (II) UnloadModule: "fbdev"
[ 625.165] (II) Unloading fbdev
[ 625.165] (II) UnloadModule: "fbdevhw"
[ 625.165] (II) Unloading fbdevhw
[ 625.165] (==) Depth 24 pixmap format is 32 bpp
[ 625.165] (II) intel(0): [DRI2] Setup complete
[ 625.165] (II) intel(0): [DRI2] DRI driver: i965
[ 625.165] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[ 625.165] (II) UXA(0): Driver registered support for the following operations:
[ 625.165] (II) solid
[ 625.165] (II) copy
[ 625.165] (II) composite (RENDER acceleration)
[ 625.165] (II) put_image
[ 625.165] (II) get_image
[ 625.165] (==) intel(0): Backing store disabled
[ 625.165] (==) intel(0): Silken mouse enabled
[ 625.165] (II) intel(0): Initializing HW Cursor
[ 625.228] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 625.228] (==) intel(0): DPMS enabled
[ 625.228] (==) intel(0): Intel XvMC decoder enabled
[ 625.228] (II) intel(0): Set up textured video
[ 625.228] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 625.228] (II) intel(0): direct rendering: DRI2 Enabled
[ 625.228] (==) intel(0): hotplug detection: "enabled"
[ 625.228] (--) RandR disabled
[ 625.228] (II) Initializing built-in extension Generic Event Extension
[ 625.228] (II) Initializing built-in extension SHAPE
[ 625.228] (II) Initializing built-in extension MIT-SHM
[ 625.228] (II) Initializing built-in extension XInputExtension
[ 625.228] (II) Initializing built-in extension XTEST
[ 625.228] (II) Initializing built-in extension BIG-REQUESTS
[ 625.228] (II) Initializing built-in extension SYNC
[ 625.228] (II) Initializing built-in extension XKEYBOARD
[ 625.228] (II) Initializing built-in extension XC-MISC
[ 625.228] (II) Initializing built-in extension SECURITY
[ 625.228] (II) Initializing built-in extension XINERAMA
[ 625.228] (II) Initializing built-in extension XFIXES
[ 625.228] (II) Initializing built-in extension RENDER
[ 625.228] (II) Initializing built-in extension RANDR
[ 625.228] (II) Initializing built-in extension COMPOSITE
[ 625.228] (II) Initializing built-in extension DAMAGE
[ 625.232] (II) AIGLX: Trying DRI driver /usr/lib/x86_64-linux-gnu/dri/i965_dri.so
[ 625.235] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 625.235] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 625.235] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 625.235] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 625.235] (II) AIGLX: Loaded and initialized i965
[ 625.235] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 625.235] (II) intel(0): Setting screen physical size to 508 x 285
[ 625.247] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 625.247] [ 625.248] [ 625.248] [ 625.248] [ 625.248] [ 625.248] [ 625.248] [ 625.248] [ 625.248] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 625.248] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 625.248] (II) LoadModule: "evdev"
[ 625.248] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 625.248] (II) Module evdev: vendor="X.Org Foundation"
[ 625.248] compiled for 1.11.2.902, module version = 2.6.99
[ 625.248] Module class: X.Org XInput Driver
[ 625.248] ABI class: X.Org XInput driver, version 13.0
[ 625.248] (II) Using input driver 'evdev' for 'Power Button'
[ 625.248] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 625.248] [ 625.248] [ 625.248] [ 625.248] [ 625.248] [ 625.248] [ 625.248] [ 625.248] [ 625.248] [ 625.248] (**) Power Button: always reports core events
[ 625.248] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 625.248] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 625.248] (--) evdev: Power Button: Found keys
[ 625.248] (II) evdev: Power Button: Configuring as keyboard
[ 625.249] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 625.249] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 625.249] (**) Option "xkb_rules" "evdev"
[ 625.249] (**) Option "xkb_model" "pc105"
[ 625.249] (**) Option "xkb_layout" "ch"
[ 625.250] (II) XKB: reuse xkmfile /var/lib/xkb/server-C1B6178BE3C8709037CFD93794F32AE80365A6B3.xkm
[ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 625.250] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 625.250] (II) Using input driver 'evdev' for 'Video Bus'
[ 625.250] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] (**) Video Bus: always reports core events
[ 625.250] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 625.250] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 625.250] (--) evdev: Video Bus: Found keys
[ 625.250] (II) evdev: Video Bus: Configuring as keyboard
[ 625.250] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[ 625.250] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 625.250] (**) Option "xkb_rules" "evdev"
[ 625.250] (**) Option "xkb_model" "pc105"
[ 625.250] (**) Option "xkb_layout" "ch"
[ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 625.250] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 625.250] (II) Using input driver 'evdev' for 'Power Button'
[ 625.250] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.250] [ 625.251] [ 625.251] [ 625.251] (**) Power Button: always reports core events
[ 625.251] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 625.251] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 625.251] (--) evdev: Power Button: Found keys
[ 625.251] (II) evdev: Power Button: Configuring as keyboard
[ 625.251] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 625.251] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 625.251] (**) Option "xkb_rules" "evdev"
[ 625.251] (**) Option "xkb_model" "pc105"
[ 625.251] (**) Option "xkb_layout" "ch"
[ 625.251] [ 625.251] [ 625.251] [ 625.251] [ 625.251] [ 625.251] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[ 625.251] (II) No input driver/identifier specified (ignoring)
[ 625.251] [ 625.251] [ 625.251] [ 625.251] [ 625.251] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[ 625.251] (II) No input driver/identifier specified (ignoring)
[ 625.251] [ 625.251] [ 625.251] [ 625.251] [ 625.251] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event12)
[ 625.251] (II) No input driver/identifier specified (ignoring)
[ 625.251] [ 625.251] [ 625.251] [ 625.251] [ 625.251] (II) config/udev: Adding input device HDA Intel PCH Line-Out Side (/dev/input/event13)
[ 625.251] (II) No input driver/identifier specified (ignoring)
[ 625.251] [ 625.252] [ 625.252] [ 625.252] [ 625.252] (II) config/udev: Adding input device HDA Intel PCH Line-Out CLFE (/dev/input/event14)
[ 625.252] (II) No input driver/identifier specified (ignoring)
[ 625.252] [ 625.252] [ 625.252] [ 625.252] [ 625.252] (II) config/udev: Adding input device HDA Intel PCH Line-Out Surround (/dev/input/event15)
[ 625.252] (II) No input driver/identifier specified (ignoring)
[ 625.252] [ 625.252] [ 625.252] [ 625.252] [ 625.252] (II) config/udev: Adding input device HDA Intel PCH Line-Out Front (/dev/input/event16)
[ 625.252] (II) No input driver/identifier specified (ignoring)
[ 625.252] [ 625.252] [ 625.252] [ 625.252] [ 625.252] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event8)
[ 625.252] (II) No input driver/identifier specified (ignoring)
[ 625.252] [ 625.252] [ 625.252] [ 625.252] [ 625.252] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[ 625.252] (II) No input driver/identifier specified (ignoring)
[ 625.252] [ 625.252] [ 625.252] [ 625.252] [ 625.252] [ 625.252] [ 625.252] (II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/event2)
[ 625.252] (**) Logitech Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 625.252] (II) Using input driver 'evdev' for 'Logitech Logitech USB Optical Mouse'
[ 625.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 625.252] [ 625.252] [ 625.252] [ 625.252] [ 625.252] [ 625.252] [ 625.252] [ 625.253] [ 625.253] [ 625.253] (**) Logitech Logitech USB Optical Mouse: always reports core events
[ 625.253] (**) evdev: Logitech Logitech USB Optical Mouse: Device: "/dev/input/event2"
[ 625.253] (--) evdev: Logitech Logitech USB Optical Mouse: Vendor 0x46d Product 0xc018
[ 625.253] (--) evdev: Logitech Logitech USB Optical Mouse: Found 3 mouse buttons
[ 625.253] (--) evdev: Logitech Logitech USB Optical Mouse: Found scroll wheel(s)
[ 625.253] (--) evdev: Logitech Logitech USB Optical Mouse: Found relative axes
[ 625.253] (--) evdev: Logitech Logitech USB Optical Mouse: Found x and y relative axes
[ 625.253] (II) evdev: Logitech Logitech USB Optical Mouse: Configuring as mouse
[ 625.253] (II) evdev: Logitech Logitech USB Optical Mouse: Adding scrollwheel support
[ 625.253] (**) evdev: Logitech Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 625.253] (**) evdev: Logitech Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 625.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input2/event2"
[ 625.253] (II) XINPUT: Adding extended input device "Logitech Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 625.253] (II) evdev: Logitech Logitech USB Optical Mouse: initialized for relative axes.
[ 625.253] (**) Logitech Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 625.253] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 625.253] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 625.253] (**) Logitech Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] (II) config/udev: Adding input device Logitech Logitech USB Optical Mouse (/dev/input/mouse0)
[ 625.253] (II) No input driver/identifier specified (ignoring)
[ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] (II) config/udev: Adding input device CHICONY HP Basic USB Keyboard (/dev/input/event3)
[ 625.253] (**) CHICONY HP Basic USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 625.253] (II) Using input driver 'evdev' for 'CHICONY HP Basic USB Keyboard'
[ 625.253] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] [ 625.253] (**) CHICONY HP Basic USB Keyboard: always reports core events
[ 625.253] (**) evdev: CHICONY HP Basic USB Keyboard: Device: "/dev/input/event3"
[ 625.253] (--) evdev: CHICONY HP Basic USB Keyboard: Vendor 0x3f0 Product 0x24
[ 625.253] (--) evdev: CHICONY HP Basic USB Keyboard: Found keys
[ 625.253] (II) evdev: CHICONY HP Basic USB Keyboard: Configuring as keyboard
[ 625.253] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input3/event3"
[ 625.253] (II) XINPUT: Adding extended input device "CHICONY HP Basic USB Keyboard" (type: KEYBOARD, id 10)
[ 625.253] (**) Option "xkb_rules" "evdev"
[ 625.253] (**) Option "xkb_model" "pc105"
[ 625.253] (**) Option "xkb_layout" "ch"
[ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] (II) config/udev: Adding input device HID 05a4:9881 (/dev/input/event5)
[ 625.254] (**) HID 05a4:9881: Ignoring device from InputClass "HAMA MCE disabled angela"
[ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] (II) config/udev: Adding input device HID 05a4:9881 (/dev/input/event6)
[ 625.254] (**) HID 05a4:9881: Ignoring device from InputClass "HAMA MCE disabled angela"
[ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] (II) config/udev: Adding input device HID 05a4:9881 (/dev/input/mouse1)
[ 625.254] (**) HID 05a4:9881: Ignoring device from InputClass "HAMA MCE disabled angela"
[ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
[ 625.254] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 625.254] (II) Using input driver 'evdev' for 'Eee PC WMI hotkeys'
[ 625.254] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] [ 625.254] (**) Eee PC WMI hotkeys: always reports core events
[ 625.254] (**) evdev: Eee PC WMI hotkeys: Device: "/dev/input/event7"
[ 625.255] (--) evdev: Eee PC WMI hotkeys: Vendor 0 Product 0
[ 625.255] (--) evdev: Eee PC WMI hotkeys: Found keys
[ 625.255] (II) evdev: Eee PC WMI hotkeys: Configuring as keyboard
[ 625.255] (**) Option "config_info" "udev:/sys/devices/platform/eeepc-wmi/input/input7/event7"
[ 625.255] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD, id 11)
[ 625.255] (**) Option "xkb_rules" "evdev"
[ 625.255] (**) Option "xkb_model" "pc105"
[ 625.255] (**) Option "xkb_layout" "ch"
[ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.255] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] (II) config/udev: Adding input device eventlircd (/dev/input/event17)
[ 625.256] (**) eventlircd: Ignoring device from InputClass "HAMA MCE disabled angela"
[ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] (II) config/udev: Adding input device eventlircd (/dev/input/mouse2)
[ 625.256] (**) eventlircd: Ignoring device from InputClass "HAMA MCE disabled angela"
[ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.256] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.257] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 625.258] [ 626.056] GetModeLine - scrn: 0 clock: 74250
[ 626.056] GetModeLine - hdsp: 1920 hbeg: 2448 hend: 2492 httl: 2640
[ 626.056] vdsp: 1080 vbeg: 1084 vend: 1094 vttl: 1125 flags: 21
[ 626.392] (II) intel(0): EDID vendor "PHL", prod id 0
[ 626.392] (II) intel(0): Using EDID range info for horizontal sync
[ 626.392] (II) intel(0): Using EDID range info for vertical refresh
[ 626.392] (II) intel(0): Printing DDC gathered Modelines:
[ 626.392] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[ 626.392] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[ 626.392] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 626.392] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 626.392] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 626.392] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 626.392] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 626.392] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 626.392] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 626.392] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[ 626.392] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz)
[ 626.392] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz)
[ 626.392] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz)
[ 626.819] (II) intel(0): EDID vendor "PHL", prod id 0
[ 626.819] (II) intel(0): Using hsync ranges from config file
[ 626.819] (II) intel(0): Using vrefresh ranges from config file
[ 626.819] (II) intel(0): Printing DDC gathered Modelines:
[ 626.820] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
[ 626.820] (II) intel(0): Modeline "1920x1080i"x0.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz)
[ 626.820] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz)
[ 626.820] (II) intel(0): Modeline "1280x720"x0.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz)
[ 626.820] (II) intel(0): Modeline "720x576"x0.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz)
[ 626.820] (II) intel(0): Modeline "720x480"x0.0 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz)
[ 626.820] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 626.820] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 626.820] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 626.820] (II) intel(0): Modeline "1440x480i"x0.0 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz)
[ 626.820] (II) intel(0): Modeline "1440x240"x0.0 27.00 1440 1478 1602 1716 240 244 247 262 -hsync -vsync (15.7 kHz)
[ 626.820] (II) intel(0): Modeline "1440x576i"x0.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz)
[ 626.820] (II) intel(0): Modeline "1440x288"x0.0 27.00 1440 1464 1590 1728 288 290 293 312 -hsync -vsync (15.6 kHz)
[ 657.412] GetModeLine - scrn: 0 clock: 74250
[ 657.412] GetModeLine - hdsp: 1920 hbeg: 2448 hend: 2492 httl: 2640
[ 657.412] vdsp: 1080 vbeg: 1084 vend: 1094 vttl: 1125 flags: 21
[ 657.682] GetModeLine - scrn: 0 clock: 74250
[ 657.682] GetModeLine - hdsp: 1920 hbeg: 2448 hend: 2492 httl: 2640
[ 657.682] vdsp: 1080 vbeg: 1084 vend: 1094 vttl: 1125 flags: 21
[ 657.708] GetModeLine - scrn: 0 clock: 74250
[ 657.708] GetModeLine - hdsp: 1920 hbeg: 2448 hend: 2492 httl: 2640
[ 657.708] vdsp: 1080 vbeg: 1084 vend: 1094 vttl: 1125 flags: 21
[ 663.816] (WW) intel(0): flip queue failed: Input/output error
[ 663.912] (WW) intel(0): Page flip failed: Input/output error
[ 663.912] (WW) intel(0): divisor 0 get vblank counter failed: Invalid argument
[ 663.912] (EE) intel(0): Detected a hung GPU, disabling acceleration.
[ 663.912] (EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg.
[ 663.956] (II) evdev: Power Button: Close
[ 663.956] (II) UnloadModule: "evdev"
[ 663.956] (II) Unloading evdev
[ 663.964] (II) evdev: Video Bus: Close
[ 663.964] (II) UnloadModule: "evdev"
[ 663.964] (II) Unloading evdev
[ 664.012] (II) evdev: Power Button: Close
[ 664.012] (II) UnloadModule: "evdev"
[ 664.012] (II) Unloading evdev
[ 664.016] (II) evdev: Logitech Logitech USB Optical Mouse: Close
[ 664.016] (II) UnloadModule: "evdev"
[ 664.016] (II) Unloading evdev
[ 664.020] (II) evdev: CHICONY HP Basic USB Keyboard: Close
[ 664.020] (II) UnloadModule: "evdev"
[ 664.020] (II) Unloading evdev
[ 664.024] (II) evdev: Eee PC WMI hotkeys: Close
[ 664.024] (II) UnloadModule: "evdev"
[ 664.024] (II) Unloading evdev
[ 664.025] ddxSigGiveUp: Closing log
[ 664.025] Server terminated successfully (0). Closing log file.
[-- Attachment #6: Type: text/plain, Size: 159 bytes --]
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: VAAPI crashes X
[not found] ` <4f6d91b5.ea10440a.24ac.ffffb18cSMTPIN_ADDED@mx.google.com>
@ 2012-03-24 11:35 ` Daniel Vetter
2012-03-24 12:20 ` Angela Schmid
0 siblings, 1 reply; 6+ messages in thread
From: Daniel Vetter @ 2012-03-24 11:35 UTC (permalink / raw)
To: Angela Schmid; +Cc: intel-gfx
On Sat, Mar 24, 2012 at 10:19:45AM +0100, Angela Schmid wrote:
> Hello
>
> I switched to Mythtv 0.25 using VAAPI and playing a recording crashes X immediately, I see following messages, see run.log:
>
> OpenGL: Could not determine whether Sync to VBlank is enabled.
>
> libva: VA-API version 0.32.0
> libva: va_getDriverName() returns 0
> libva: Trying to open /usr/lib/dri/i965_drv_video.so
> libva: va_openDriver() returns 0
>
> (WW) intel(0): flip queue failed: Input/output error
> (WW) intel(0): Page flip failed: Input/output error
> (WW) intel(0): divisor 0 get vblank counter failed: Invalid argument
> (EE) intel(0): Detected a hung GPU, disabling acceleration.
> (EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg.
> intel_do_flush_locked failed: Input/output error
> /usr/bin/xinit: connection to X server lost
>
>
> [ 663.812879] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
> [ 663.815205] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
> [ 663.821719] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 791 at 785, next 792)
> [ 663.825652] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=1
> [ 663.825690] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
> [ 664.037996] ------------[ cut here ]------------
> [ 664.038016] WARNING: at drivers/gpu/drm/i915/i915_gem.c:2397 i915_gem_object_put_fence+0xab/0xc0 [i915]()
> [ 664.038018] Hardware name: System Product Name
> [ 664.038019] Modules linked in: dvbloopback(O) rfcomm bnep bluetooth parport_pc ppdev binfmt_misc dm_crypt ipt_MASQUERADE
> iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables snd_hda_codec_hdmi
> snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi tda18271c2dd(O) snd_rawmidi arc4 ath9k
> snd_seq_midi_event mac80211 snd_seq drxk(O) snd_timer snd_seq_device snd ddbridge(O) dvb_core(O) ath9k_common psmouse ath9k_hw ath
> eeepc_wmi asus_wmi sparse_keymap soundcore serio_raw snd_page_alloc cxd2099(O) mei(C) cfg80211 lp parport usbhid hid usb_storage uas
> 8139too mxm_wmi 8139cp firewire_ohci firewire_core crc_itu_t i915 ahci libahci drm_kms_helper xhci_hcd e1000e drm i2c_algo_bit video
> wmi
> [ 664.038054] Pid: 3156, comm: Xorg Tainted: G C O 3.3.0-rc2-angela2+ #1
> [ 664.038055] Call Trace:
> [ 664.038061] [<ffffffff8104d21f>] warn_slowpath_common+0x7f/0xc0
> [ 664.038064] [<ffffffff8104d27a>] warn_slowpath_null+0x1a/0x20
> [ 664.038072] [<ffffffffa00db45b>] i915_gem_object_put_fence+0xab/0xc0 [i915]
> [ 664.038079] [<ffffffffa00dce93>] i915_gem_object_unbind+0xa3/0x2d0 [i915]
> [ 664.038090] [<ffffffffa002a117>] ? drm_mode_object_put+0x47/0x60 [drm]
> [ 664.038097] [<ffffffffa00dd0f4>] i915_gem_free_object_tail+0x34/0x150 [i915]
> [ 664.038105] [<ffffffffa00dff61>] i915_gem_free_object+0x51/0x60 [i915]
> [ 664.038112] [<ffffffffa001fc9a>] drm_gem_object_free+0x2a/0x30 [drm]
> [ 664.038121] [<ffffffffa00ed970>] intel_user_framebuffer_destroy+0x70/0x80 [i915]
> [ 664.038129] [<ffffffffa002e613>] drm_fb_release+0x83/0xb0 [drm]
> [ 664.038136] [<ffffffffa001f810>] drm_release+0x5e0/0x6e0 [drm]
> [ 664.038139] [<ffffffff811753ca>] fput+0xea/0x220
> [ 664.038141] [<ffffffff81171b36>] filp_close+0x66/0x90
> [ 664.038143] [<ffffffff81050d38>] put_files_struct+0x88/0xf0
> [ 664.038145] [<ffffffff81050e64>] exit_files+0x54/0x70
> [ 664.038147] [<ffffffff8105134a>] do_exit+0x19a/0x8c0
> [ 664.038150] [<ffffffff81051dd4>] do_group_exit+0x44/0xa0
> [ 664.038152] [<ffffffff81051e47>] sys_exit_group+0x17/0x20
> [ 664.038155] [<ffffffff816195e9>] system_call_fastpath+0x16/0x1b
> [ 664.038156] ---[ end trace 5bed8a9786c4dd85 ]---
>
>
> cat /sys/kernel/debug/dri/0/i915_error_state
> cat: /sys/kernel/debug/dri/0/i915_error_state: Cannot allocate memory
We're dumping a few megabytes of data through that file, and because we're
using simple helper routines we need to allocate all that data as a
contigious chunk. Which can easily fail if you're system has been up for a
longer time. Kill all applications and then retrying to grab the
error_state helps sometimes.
Fixing that is on our todo, albeit quite a bit down ...
Yours, Daniel
>
> I googled, but didn't find a solution. What is wrong here ?
>
> --------------------------------------
> I don't have an xorg.conf. Have updated xorg-edgers intel drivers.
>
> pkg-config --modversion libdrm
> 2.4.32
>
> A kernel 3.3.0-rc2, with interlaced patches, from 14.02.2012.
>
>
>
> PGETBL_CTL: 0x00000000
> GEN6_INSTDONE_1: 0x8989ff6f
> GEN6_INSTDONE_2: 0xbffffffe
> CPU_VGACNTRL: 0x80000000 (disabled)
> DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000
> RR_HW_CTL: 0x00000000 (low 0, high 0)
> FDI_PLL_BIOS_0: 0xffffffff
> FDI_PLL_BIOS_1: 0xffffffff
> FDI_PLL_BIOS_2: 0xffffffff
> DISPLAY_PORT_PLL_BIOS_0: 0xffffffff
> DISPLAY_PORT_PLL_BIOS_1: 0xffffffff
> DISPLAY_PORT_PLL_BIOS_2: 0xffffffff
> FDI_PLL_FREQ_CTL: 0xffffffff
> PIPEACONF: 0x00600000 (disabled, inactive, 8bpc)
> HTOTAL_A: 0x0a4f077f (1920 active, 2640 total)
> HBLANK_A: 0x0a4f077f (1920 start, 2640 end)
> HSYNC_A: 0x09bb098f (2448 start, 2492 end)
> VTOTAL_A: 0x04630437 (1080 active, 1124 total)
> VBLANK_A: 0x04630437 (1080 start, 1124 end)
> VSYNC_A: 0x0445043b (1084 start, 1094 end)
> VSYNCSHIFT_A: 0x00000468
> PIPEASRC: 0x077f0437 (1920, 1080)
> PIPEA_DATA_M1: 0x7e1b30f0 (TU 64, val 0x1b30f0 1782000)
> PIPEA_DATA_N1: 0x0020f580 (val 0x20f580 2160000)
> PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
> PIPEA_DATA_N2: 0x00000000 (val 0x0 0)
> PIPEA_LINK_M1: 0x0001220a (val 0x1220a 74250)
> PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)
> PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
> PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
> DSPACNTR: 0x58004000 (disabled)
> DSPABASE: 0x00000000
> DSPASTRIDE: 0x00001e00 (120)
> DSPASURF: 0x00064000
> DSPATILEOFF: 0x00000000 (0, 0)
> PIPEBCONF: 0x00000000 (disabled, inactive, 8bpc)
> HTOTAL_B: 0x00000000 (1 active, 1 total)
> HBLANK_B: 0x00000000 (1 start, 1 end)
> HSYNC_B: 0x00000000 (1 start, 1 end)
> VTOTAL_B: 0x00000000 (1 active, 1 total)
> VBLANK_B: 0x00000000 (1 start, 1 end)
> VSYNC_B: 0x00000000 (1 start, 1 end)
> VSYNCSHIFT_B: 0x00000000
> DSPBCNTR: 0x00004000 (disabled)
> DSPBBASE: 0x00000000
> DSPBSTRIDE: 0x00000000 (0)
> DSPBSURF: 0x00000000
> DSPBTILEOFF: 0x00000000 (0, 0)
> PIPEBSRC: 0x00000000 (1, 1)
> PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
> PIPEB_DATA_N1: 0x00000000 (val 0x0 0)
> PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
> PIPEB_DATA_N2: 0x00000000 (val 0x0 0)
> PIPEB_LINK_M1: 0x00000000 (val 0x0 0)
> PIPEB_LINK_N1: 0x00000000 (val 0x0 0)
> PIPEB_LINK_M2: 0x00000000 (val 0x0 0)
> PIPEB_LINK_N2: 0x00000000 (val 0x0 0)
> PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
> PFA_CTL_2: 0x00007ef2 (vscale 0.991760)
> PFA_CTL_3: 0x00003f79 (vscale initial phase 0.495880)
> PFA_CTL_4: 0x00007c40 (hscale 0.970703)
> PFA_WIN_POS: 0x00000000 (0, 0)
> PFA_WIN_SIZE: 0x00000000 (0, 0)
> PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable, vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field 1)
> PFB_CTL_2: 0x00000000 (vscale 0.000000)
> PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000)
> PFB_CTL_4: 0x00000000 (hscale 0.000000)
> PFB_WIN_POS: 0x00000000 (0, 0)
> PFB_WIN_SIZE: 0x00000000 (0, 0)
> PCH_DREF_CONTROL: 0x00000400 (cpu source disable, ssc_source disable, nonspread_source enable, superspread_source disable, ssc4_mode downspread, ssc1 disable, ssc4 disable)
> PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
> PCH_DPLL_TMR_CFG: 0x0271186a
> PCH_SSC4_PARMS: 0x01204860
> PCH_SSC4_AUX_PARMS: 0x000029c5
> PCH_DPLL_SEL: 0x00000000 (TransA DPLL disable (DPLL (null)), TransB DPLL disable (DPLL (null)))
> PCH_DPLL_ANALOG_CTL: 0x00008000
> PCH_DPLL_A: 0x44080008 (disable, sdvo high speed yes, mode (null), p2 (null), FPA0 P1 4, FPA1 P1 4, refclk default 120Mhz, sdvo/hdmi mul 1)
> PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8, FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1)
> PCH_FPA0: 0x00021007 (n = 2, m1 = 16, m2 = 7)
> PCH_FPA1: 0x00021007 (n = 2, m1 = 16, m2 = 7)
> PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
> PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
> TRANS_HTOTAL_A: 0x0a4f077f (1920 active, 2640 total)
> TRANS_HBLANK_A: 0x0a4f077f (1920 start, 2640 end)
> TRANS_HSYNC_A: 0x09bb098f (2448 start, 2492 end)
> TRANS_VTOTAL_A: 0x04630437 (1080 active, 1124 total)
> TRANS_VBLANK_A: 0x04630437 (1080 start, 1124 end)
> TRANS_VSYNC_A: 0x0445043b (1084 start, 1094 end)
> TRANS_VSYNCSHIFT_A: 0x00000468
> TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
> TRANSA_DATA_N1: 0x00000000 (val 0x0 0)
> TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
> TRANSA_DATA_N2: 0x00000000 (val 0x0 0)
> TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)
> TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)
> TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)
> TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)
> TRANS_HTOTAL_B: 0x00000000 (1 active, 1 total)
> TRANS_HBLANK_B: 0x00000000 (1 start, 1 end)
> TRANS_HSYNC_B: 0x00000000 (1 start, 1 end)
> TRANS_VTOTAL_B: 0x00000000 (1 active, 1 total)
> TRANS_VBLANK_B: 0x00000000 (1 start, 1 end)
> TRANS_VSYNC_B: 0x00000000 (1 start, 1 end)
> TRANS_VSYNCSHIFT_B: 0x00000000
> TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
> TRANSB_DATA_N1: 0x00000000 (val 0x0 0)
> TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
> TRANSB_DATA_N2: 0x00000000 (val 0x0 0)
> TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)
> TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)
> TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)
> TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)
> TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)
> TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)
> TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)
> TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)
> TRANS_VBLANK_C: 0x00000000 (1 start, 1 end)
> TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)
> TRANS_VSYNCSHIFT_C: 0x00000000
> TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
> TRANSC_DATA_N1: 0x00000000 (val 0x0 0)
> TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
> TRANSC_DATA_N2: 0x00000000 (val 0x0 0)
> TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)
> TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)
> TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)
> TRANSC_DP_LINK_N2: 0x00000000 (val 0x0 0)
> TRANSACONF: 0x00600000 (disable, inactive)
> TRANSBCONF: 0x00000000 (disable, inactive)
> TRANSCCONF: 0x00000000 (disable, inactive)
> FDI_TXA_CTL: 0x00040000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing enable, FDI PLL disable, scrambing enable, master mode disable)
> FDI_TXB_CTL: 0x00040000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing enable, FDI PLL disable, scrambing enable, master mode disable)
> FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis 0dB, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable)
> FDI_RXA_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
> FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
> FDI_RXC_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1, 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
> FDI_RXA_MISC: 0x00000080 (FDI Delay 128)
> FDI_RXB_MISC: 0x00000080 (FDI Delay 128)
> FDI_RXC_MISC: 0x00000080 (FDI Delay 128)
> FDI_RXA_TUSIZE1: 0x7e000000
> FDI_RXA_TUSIZE2: 0x7e000000
> FDI_RXB_TUSIZE1: 0x7e000000
> FDI_RXB_TUSIZE2: 0x7e000000
> FDI_RXC_TUSIZE1: 0x7e000000
> FDI_RXC_TUSIZE2: 0x7e000000
> FDI_PLL_CTL_1: 0x7e000000
> FDI_PLL_CTL_2: 0x7e000000
> FDI_RXA_IIR: 0x00000000
> FDI_RXA_IMR: 0x000008ff
> FDI_RXB_IIR: 0x00000000
> FDI_RXB_IMR: 0x000008ff
> PCH_ADPA: 0x00f40000 (disabled, transcoder A, -hsync, -vsync)
> HDMIB: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
> HDMIC: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync detected)
> HDMID: 0x00000a9c (disabled pipe A 8bpc TMDS HDMI audio disabled +vsync +hsync detected)
> PCH_LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1 channel)
> CPU_eDP_A: 0x00000018
> PCH_DP_B: 0x00000004
> PCH_DP_C: 0x00000004
> PCH_DP_D: 0x00000004
> TRANS_DP_CTL_A: 0x60000018 (disable port none 8bpc +vsync +hsync)
> TRANS_DP_CTL_B: 0x60000018 (disable port none 8bpc +vsync +hsync)
> TRANS_DP_CTL_C: 0x60000018 (disable port none 8bpc +vsync +hsync)
> BLC_PWM_CPU_CTL2: 0x00000000
> BLC_PWM_CPU_CTL: 0x00000000
> BLC_PWM_PCH_CTL1: 0x00000000
> BLC_PWM_PCH_CTL2: 0x00000000
> PCH_PP_STATUS: 0x00000000 (off, not ready, sequencing idle)
> PCH_PP_CONTROL: 0xabcd0000 (blacklight disabled, do not power down on reset, panel off)
> PCH_PP_ON_DELAYS: 0x00000000
> PCH_PP_OFF_DELAYS: 0x00000000
> PCH_PP_DIVISOR: 0x00186904
> PORT_DBG: 0x00000000 (HW DRRS off)
> RC6_RESIDENCY_TIME: 0x016c6ec0
> RC6p_RESIDENCY_TIME: 0x00000000
> RC6pp_RESIDENCY_TIME: 0x00000000
> _______________________________________________
> Intel-gfx mailing list
> Intel-gfx@lists.freedesktop.org
> http://lists.freedesktop.org/mailman/listinfo/intel-gfx
--
Daniel Vetter
Mail: daniel@ffwll.ch
Mobile: +41 (0)79 365 57 48
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: VAAPI crashes X
2012-03-24 11:35 ` Daniel Vetter
@ 2012-03-24 12:20 ` Angela Schmid
0 siblings, 0 replies; 6+ messages in thread
From: Angela Schmid @ 2012-03-24 12:20 UTC (permalink / raw)
To: 'Daniel Vetter'; +Cc: intel-gfx
> >
> > I switched to Mythtv 0.25 using VAAPI and playing a recording crashes X immediately, I see following messages,
> see run.log:
> >
> > OpenGL: Could not determine whether Sync to VBlank is enabled.
> >
> > libva: VA-API version 0.32.0
> > libva: va_getDriverName() returns 0
> > libva: Trying to open /usr/lib/dri/i965_drv_video.so
> > libva: va_openDriver() returns 0
> >
> > (WW) intel(0): flip queue failed: Input/output error
> > (WW) intel(0): Page flip failed: Input/output error
> > (WW) intel(0): divisor 0 get vblank counter failed: Invalid argument
> > (EE) intel(0): Detected a hung GPU, disabling acceleration.
> > (EE) intel(0): When reporting this, please include i915_error_state from debugfs and the full dmesg.
> > intel_do_flush_locked failed: Input/output error
> > /usr/bin/xinit: connection to X server lost
> >
> >
> > [ 663.812879] [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
> > [ 663.815205] [drm] capturing error event; look for more information in /debug/dri/0/i915_error_state
> > [ 663.821719] [drm:i915_wait_request] *ERROR* i915_wait_request returns -11 (awaiting 791 at 785, next 792)
> > [ 663.825652] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=1
> > [ 663.825690] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
> > [ 664.037996] ------------[ cut here ]------------
> > [ 664.038016] WARNING: at drivers/gpu/drm/i915/i915_gem.c:2397 i915_gem_object_put_fence+0xab/0xc0 [i915]()
> > [ 664.038018] Hardware name: System Product Name
> > [ 664.038019] Modules linked in: dvbloopback(O) rfcomm bnep bluetooth parport_pc ppdev binfmt_misc dm_crypt
> ipt_MASQUERADE
> > iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack nf_defrag_ipv4 iptable_filter ip_tables x_tables
> snd_hda_codec_hdmi
> > snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq_midi tda18271c2dd(O) snd_rawmidi
> arc4 ath9k
> > snd_seq_midi_event mac80211 snd_seq drxk(O) snd_timer snd_seq_device snd ddbridge(O) dvb_core(O) ath9k_common
> psmouse ath9k_hw ath
> > eeepc_wmi asus_wmi sparse_keymap soundcore serio_raw snd_page_alloc cxd2099(O) mei(C) cfg80211 lp parport
> usbhid hid usb_storage uas
> > 8139too mxm_wmi 8139cp firewire_ohci firewire_core crc_itu_t i915 ahci libahci drm_kms_helper xhci_hcd e1000e
> drm i2c_algo_bit video
> > wmi
> > [ 664.038054] Pid: 3156, comm: Xorg Tainted: G C O 3.3.0-rc2-angela2+ #1
> > [ 664.038055] Call Trace:
> > [ 664.038061] [<ffffffff8104d21f>] warn_slowpath_common+0x7f/0xc0
> > [ 664.038064] [<ffffffff8104d27a>] warn_slowpath_null+0x1a/0x20
> > [ 664.038072] [<ffffffffa00db45b>] i915_gem_object_put_fence+0xab/0xc0 [i915]
> > [ 664.038079] [<ffffffffa00dce93>] i915_gem_object_unbind+0xa3/0x2d0 [i915]
> > [ 664.038090] [<ffffffffa002a117>] ? drm_mode_object_put+0x47/0x60 [drm]
> > [ 664.038097] [<ffffffffa00dd0f4>] i915_gem_free_object_tail+0x34/0x150 [i915]
> > [ 664.038105] [<ffffffffa00dff61>] i915_gem_free_object+0x51/0x60 [i915]
> > [ 664.038112] [<ffffffffa001fc9a>] drm_gem_object_free+0x2a/0x30 [drm]
> > [ 664.038121] [<ffffffffa00ed970>] intel_user_framebuffer_destroy+0x70/0x80 [i915]
> > [ 664.038129] [<ffffffffa002e613>] drm_fb_release+0x83/0xb0 [drm]
> > [ 664.038136] [<ffffffffa001f810>] drm_release+0x5e0/0x6e0 [drm]
> > [ 664.038139] [<ffffffff811753ca>] fput+0xea/0x220
> > [ 664.038141] [<ffffffff81171b36>] filp_close+0x66/0x90
> > [ 664.038143] [<ffffffff81050d38>] put_files_struct+0x88/0xf0
> > [ 664.038145] [<ffffffff81050e64>] exit_files+0x54/0x70
> > [ 664.038147] [<ffffffff8105134a>] do_exit+0x19a/0x8c0
> > [ 664.038150] [<ffffffff81051dd4>] do_group_exit+0x44/0xa0
> > [ 664.038152] [<ffffffff81051e47>] sys_exit_group+0x17/0x20
> > [ 664.038155] [<ffffffff816195e9>] system_call_fastpath+0x16/0x1b
> > [ 664.038156] ---[ end trace 5bed8a9786c4dd85 ]---
> >
> >
> > cat /sys/kernel/debug/dri/0/i915_error_state
> > cat: /sys/kernel/debug/dri/0/i915_error_state: Cannot allocate memory
>
> We're dumping a few megabytes of data through that file, and because we're
> using simple helper routines we need to allocate all that data as a
> contigious chunk. Which can easily fail if you're system has been up for a
> longer time. Kill all applications and then retrying to grab the
> error_state helps sometimes.
>
> Fixing that is on our todo, albeit quite a bit down ...
>
> Yours, Daniel
Hello Daniel,
This happens immediately after a reboot and start of a recording. It's a 8GB system, I killed all programs, but still can't collect
from i915_error_state.
Are the rest of the errors of any help to identify the problem ? Is userspace out-of-sync in respect to the kernel ? Do I need an
updated kernel ?
Also it is of interest if the warnings actually mean problems, e.g. OpenGL: Could not determine whether Sync to VBlank is enabled.
Angela
> > --------------------------------------
> > I don't have an xorg.conf. Have updated xorg-edgers intel drivers.
> >
> > pkg-config --modversion libdrm
> > 2.4.32
> >
> > A kernel 3.3.0-rc2, with interlaced patches, from 14.02.2012.
> >
> >
> >
>
>
> > PGETBL_CTL: 0x00000000
> > GEN6_INSTDONE_1: 0x8989ff6f
> > GEN6_INSTDONE_2: 0xbffffffe
> > CPU_VGACNTRL: 0x80000000 (disabled)
> > DIGITAL_PORT_HOTPLUG_CNTRL: 0x00000000
> > RR_HW_CTL: 0x00000000 (low 0, high 0)
> > FDI_PLL_BIOS_0: 0xffffffff
> > FDI_PLL_BIOS_1: 0xffffffff
> > FDI_PLL_BIOS_2: 0xffffffff
> > DISPLAY_PORT_PLL_BIOS_0: 0xffffffff
> > DISPLAY_PORT_PLL_BIOS_1: 0xffffffff
> > DISPLAY_PORT_PLL_BIOS_2: 0xffffffff
> > FDI_PLL_FREQ_CTL: 0xffffffff
> > PIPEACONF: 0x00600000 (disabled, inactive, 8bpc)
> > HTOTAL_A: 0x0a4f077f (1920 active, 2640 total)
> > HBLANK_A: 0x0a4f077f (1920 start, 2640 end)
> > HSYNC_A: 0x09bb098f (2448 start, 2492 end)
> > VTOTAL_A: 0x04630437 (1080 active, 1124 total)
> > VBLANK_A: 0x04630437 (1080 start, 1124 end)
> > VSYNC_A: 0x0445043b (1084 start, 1094 end)
> > VSYNCSHIFT_A: 0x00000468
> > PIPEASRC: 0x077f0437 (1920, 1080)
> > PIPEA_DATA_M1: 0x7e1b30f0 (TU 64, val 0x1b30f0 1782000)
> > PIPEA_DATA_N1: 0x0020f580 (val 0x20f580 2160000)
> > PIPEA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
> > PIPEA_DATA_N2: 0x00000000 (val 0x0 0)
> > PIPEA_LINK_M1: 0x0001220a (val 0x1220a 74250)
> > PIPEA_LINK_N1: 0x00041eb0 (val 0x41eb0 270000)
> > PIPEA_LINK_M2: 0x00000000 (val 0x0 0)
> > PIPEA_LINK_N2: 0x00000000 (val 0x0 0)
> > DSPACNTR: 0x58004000 (disabled)
> > DSPABASE: 0x00000000
> > DSPASTRIDE: 0x00001e00 (120)
> > DSPASURF: 0x00064000
> > DSPATILEOFF: 0x00000000 (0, 0)
> > PIPEBCONF: 0x00000000 (disabled, inactive, 8bpc)
> > HTOTAL_B: 0x00000000 (1 active, 1 total)
> > HBLANK_B: 0x00000000 (1 start, 1 end)
> > HSYNC_B: 0x00000000 (1 start, 1 end)
> > VTOTAL_B: 0x00000000 (1 active, 1 total)
> > VBLANK_B: 0x00000000 (1 start, 1 end)
> > VSYNC_B: 0x00000000 (1 start, 1 end)
> > VSYNCSHIFT_B: 0x00000000
> > DSPBCNTR: 0x00004000 (disabled)
> > DSPBBASE: 0x00000000
> > DSPBSTRIDE: 0x00000000 (0)
> > DSPBSURF: 0x00000000
> > DSPBTILEOFF: 0x00000000 (0, 0)
> > PIPEBSRC: 0x00000000 (1, 1)
> > PIPEB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
> > PIPEB_DATA_N1: 0x00000000 (val 0x0 0)
> > PIPEB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
> > PIPEB_DATA_N2: 0x00000000 (val 0x0 0)
> > PIPEB_LINK_M1: 0x00000000 (val 0x0 0)
> > PIPEB_LINK_N1: 0x00000000 (val 0x0 0)
> > PIPEB_LINK_M2: 0x00000000 (val 0x0 0)
> > PIPEB_LINK_N2: 0x00000000 (val 0x0 0)
> > PFA_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable,
> vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field
> 1)
> > PFA_CTL_2: 0x00007ef2 (vscale 0.991760)
> > PFA_CTL_3: 0x00003f79 (vscale initial phase 0.495880)
> > PFA_CTL_4: 0x00007c40 (hscale 0.970703)
> > PFA_WIN_POS: 0x00000000 (0, 0)
> > PFA_WIN_SIZE: 0x00000000 (0, 0)
> > PFB_CTL_1: 0x00000000 (disable, auto_scale yes, auto_scale_cal no, v_filter enable,
> vadapt disable, mode least, filter_sel programmed,chroma pre-filter disable, vert3tap auto, v_inter_invert field
> 1)
> > PFB_CTL_2: 0x00000000 (vscale 0.000000)
> > PFB_CTL_3: 0x00000000 (vscale initial phase 0.000000)
> > PFB_CTL_4: 0x00000000 (hscale 0.000000)
> > PFB_WIN_POS: 0x00000000 (0, 0)
> > PFB_WIN_SIZE: 0x00000000 (0, 0)
> > PCH_DREF_CONTROL: 0x00000400 (cpu source disable, ssc_source disable, nonspread_source enable,
> superspread_source disable, ssc4_mode downspread, ssc1 disable, ssc4 disable)
> > PCH_RAWCLK_FREQ: 0x0000007d (FDL_TP1 timer 0.5us, FDL_TP2 timer 1.5us, freq 125)
> > PCH_DPLL_TMR_CFG: 0x0271186a
> > PCH_SSC4_PARMS: 0x01204860
> > PCH_SSC4_AUX_PARMS: 0x000029c5
> > PCH_DPLL_SEL: 0x00000000 (TransA DPLL disable (DPLL (null)), TransB DPLL disable (DPLL
> (null)))
> > PCH_DPLL_ANALOG_CTL: 0x00008000
> > PCH_DPLL_A: 0x44080008 (disable, sdvo high speed yes, mode (null), p2 (null), FPA0 P1 4,
> FPA1 P1 4, refclk default 120Mhz, sdvo/hdmi mul 1)
> > PCH_DPLL_B: 0x04800080 (disable, sdvo high speed no, mode (null), p2 (null), FPA0 P1 8,
> FPA1 P1 8, refclk default 120Mhz, sdvo/hdmi mul 1)
> > PCH_FPA0: 0x00021007 (n = 2, m1 = 16, m2 = 7)
> > PCH_FPA1: 0x00021007 (n = 2, m1 = 16, m2 = 7)
> > PCH_FPB0: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
> > PCH_FPB1: 0x00030d07 (n = 3, m1 = 13, m2 = 7)
> > TRANS_HTOTAL_A: 0x0a4f077f (1920 active, 2640 total)
> > TRANS_HBLANK_A: 0x0a4f077f (1920 start, 2640 end)
> > TRANS_HSYNC_A: 0x09bb098f (2448 start, 2492 end)
> > TRANS_VTOTAL_A: 0x04630437 (1080 active, 1124 total)
> > TRANS_VBLANK_A: 0x04630437 (1080 start, 1124 end)
> > TRANS_VSYNC_A: 0x0445043b (1084 start, 1094 end)
> > TRANS_VSYNCSHIFT_A: 0x00000468
> > TRANSA_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
> > TRANSA_DATA_N1: 0x00000000 (val 0x0 0)
> > TRANSA_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
> > TRANSA_DATA_N2: 0x00000000 (val 0x0 0)
> > TRANSA_DP_LINK_M1: 0x00000000 (val 0x0 0)
> > TRANSA_DP_LINK_N1: 0x00000000 (val 0x0 0)
> > TRANSA_DP_LINK_M2: 0x00000000 (val 0x0 0)
> > TRANSA_DP_LINK_N2: 0x00000000 (val 0x0 0)
> > TRANS_HTOTAL_B: 0x00000000 (1 active, 1 total)
> > TRANS_HBLANK_B: 0x00000000 (1 start, 1 end)
> > TRANS_HSYNC_B: 0x00000000 (1 start, 1 end)
> > TRANS_VTOTAL_B: 0x00000000 (1 active, 1 total)
> > TRANS_VBLANK_B: 0x00000000 (1 start, 1 end)
> > TRANS_VSYNC_B: 0x00000000 (1 start, 1 end)
> > TRANS_VSYNCSHIFT_B: 0x00000000
> > TRANSB_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
> > TRANSB_DATA_N1: 0x00000000 (val 0x0 0)
> > TRANSB_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
> > TRANSB_DATA_N2: 0x00000000 (val 0x0 0)
> > TRANSB_DP_LINK_M1: 0x00000000 (val 0x0 0)
> > TRANSB_DP_LINK_N1: 0x00000000 (val 0x0 0)
> > TRANSB_DP_LINK_M2: 0x00000000 (val 0x0 0)
> > TRANSB_DP_LINK_N2: 0x00000000 (val 0x0 0)
> > TRANS_HTOTAL_C: 0x00000000 (1 active, 1 total)
> > TRANS_HBLANK_C: 0x00000000 (1 start, 1 end)
> > TRANS_HSYNC_C: 0x00000000 (1 start, 1 end)
> > TRANS_VTOTAL_C: 0x00000000 (1 active, 1 total)
> > TRANS_VBLANK_C: 0x00000000 (1 start, 1 end)
> > TRANS_VSYNC_C: 0x00000000 (1 start, 1 end)
> > TRANS_VSYNCSHIFT_C: 0x00000000
> > TRANSC_DATA_M1: 0x00000000 (TU 1, val 0x0 0)
> > TRANSC_DATA_N1: 0x00000000 (val 0x0 0)
> > TRANSC_DATA_M2: 0x00000000 (TU 1, val 0x0 0)
> > TRANSC_DATA_N2: 0x00000000 (val 0x0 0)
> > TRANSC_DP_LINK_M1: 0x00000000 (val 0x0 0)
> > TRANSC_DP_LINK_N1: 0x00000000 (val 0x0 0)
> > TRANSC_DP_LINK_M2: 0x00000000 (val 0x0 0)
> > TRANSC_DP_LINK_N2: 0x00000000 (val 0x0 0)
> > TRANSACONF: 0x00600000 (disable, inactive)
> > TRANSBCONF: 0x00000000 (disable, inactive)
> > TRANSCCONF: 0x00000000 (disable, inactive)
> > FDI_TXA_CTL: 0x00040000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis
> 0dB, port width X1, enhanced framing enable, FDI PLL disable, scrambing enable, master mode disable)
> > FDI_TXB_CTL: 0x00040000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis
> 0dB, port width X1, enhanced framing enable, FDI PLL disable, scrambing enable, master mode disable)
> > FDI_TXC_CTL: 0x00000000 (disable, train pattern pattern_1, voltage swing 0.4V,pre-emphasis
> 0dB, port width X1, enhanced framing disable, FDI PLL disable, scrambing enable, master mode disable)
> > FDI_RXA_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1,
> 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS
> err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
> > FDI_RXB_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1,
> 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS
> err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
> > FDI_RXC_CTL: 0x00000040 (disable, train pattern pattern_1, port width X1,
> 8bpc,link_reverse_strap_overwrite no, dmi_link_reverse no, FDI PLL disable,FS ecc disable, FE ecc disable, FS
> err report disable, FE err report disable,scrambing enable, enhanced framing enable, RawClk)
> > FDI_RXA_MISC: 0x00000080 (FDI Delay 128)
> > FDI_RXB_MISC: 0x00000080 (FDI Delay 128)
> > FDI_RXC_MISC: 0x00000080 (FDI Delay 128)
> > FDI_RXA_TUSIZE1: 0x7e000000
> > FDI_RXA_TUSIZE2: 0x7e000000
> > FDI_RXB_TUSIZE1: 0x7e000000
> > FDI_RXB_TUSIZE2: 0x7e000000
> > FDI_RXC_TUSIZE1: 0x7e000000
> > FDI_RXC_TUSIZE2: 0x7e000000
> > FDI_PLL_CTL_1: 0x7e000000
> > FDI_PLL_CTL_2: 0x7e000000
> > FDI_RXA_IIR: 0x00000000
> > FDI_RXA_IMR: 0x000008ff
> > FDI_RXB_IIR: 0x00000000
> > FDI_RXB_IMR: 0x000008ff
> > PCH_ADPA: 0x00f40000 (disabled, transcoder A, -hsync, -vsync)
> > HDMIB: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync
> detected)
> > HDMIC: 0x0000001c (disabled pipe A 8bpc SDVO DVI audio disabled +vsync +hsync
> detected)
> > HDMID: 0x00000a9c (disabled pipe A 8bpc TMDS HDMI audio disabled +vsync +hsync
> detected)
> > PCH_LVDS: 0x00000000 (disabled, pipe A, 18 bit, 1 channel)
> > CPU_eDP_A: 0x00000018
> > PCH_DP_B: 0x00000004
> > PCH_DP_C: 0x00000004
> > PCH_DP_D: 0x00000004
> > TRANS_DP_CTL_A: 0x60000018 (disable port none 8bpc +vsync +hsync)
> > TRANS_DP_CTL_B: 0x60000018 (disable port none 8bpc +vsync +hsync)
> > TRANS_DP_CTL_C: 0x60000018 (disable port none 8bpc +vsync +hsync)
> > BLC_PWM_CPU_CTL2: 0x00000000
> > BLC_PWM_CPU_CTL: 0x00000000
> > BLC_PWM_PCH_CTL1: 0x00000000
> > BLC_PWM_PCH_CTL2: 0x00000000
> > PCH_PP_STATUS: 0x00000000 (off, not ready, sequencing idle)
> > PCH_PP_CONTROL: 0xabcd0000 (blacklight disabled, do not power down on reset, panel off)
> > PCH_PP_ON_DELAYS: 0x00000000
> > PCH_PP_OFF_DELAYS: 0x00000000
> > PCH_PP_DIVISOR: 0x00186904
> > PORT_DBG: 0x00000000 (HW DRRS off)
> > RC6_RESIDENCY_TIME: 0x016c6ec0
> > RC6p_RESIDENCY_TIME: 0x00000000
> > RC6pp_RESIDENCY_TIME: 0x00000000
>
>
>
> > _______________________________________________
> > Intel-gfx mailing list
> > Intel-gfx@lists.freedesktop.org
> > http://lists.freedesktop.org/mailman/listinfo/intel-gfx
>
>
> --
> Daniel Vetter
> Mail: daniel@ffwll.ch
> Mobile: +41 (0)79 365 57 48
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-03-24 12:20 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-09 7:04 VA-API brightness property Oliver Seitz
2012-03-17 8:36 ` Oliver Seitz
2012-03-19 1:51 ` Xiang, Haihao
2012-03-24 9:19 ` VAAPI crashes X Angela Schmid
[not found] ` <4f6d91b5.ea10440a.24ac.ffffb18cSMTPIN_ADDED@mx.google.com>
2012-03-24 11:35 ` Daniel Vetter
2012-03-24 12:20 ` Angela Schmid
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.