From: "Andreas Färber" <afaerber@suse.de>
To: Peter Portante <peter.portante@redhat.com>
Cc: qemu-trivial@nongnu.org, Kevin Wolf <kwolf@redhat.com>,
qemu-devel@nongnu.org, Peter Portante <pportant@redhat.com>
Subject: Re: [Qemu-trivial] [Qemu-devel] [PATCH] Whitespace clean up.
Date: Thu, 22 Mar 2012 15:42:13 +0100 [thread overview]
Message-ID: <4F6B3A45.1000306@suse.de> (raw)
In-Reply-To: <1332354187-15720-1-git-send-email-peter.portante@redhat.com>
For one, while non-functional, this patch should probably be reviewed by
the block maintainer to not interfere with already queued patches.
Then the subject should indicate which part of code it touches, like
"block: " or "block/raw-posix.c: ". If Kevin agrees to merge this patch
I would suggest to amend the commit message saying that this is
converting tabs to spaces.
We don't usually place a period after the subject line (which happens to
not be a sentence) but that's an irrelevant detail. :)
Our policy has been to not apply formatting-only fixes without an
obvious reason. Is there a patch following that depends on this one?
That being said, the code movement looks correct.
Andreas
Am 21.03.2012 19:23, schrieb Peter Portante:
> Signed-off-by: Peter Portante <pportant@redhat.com>
> ---
> block/raw-posix.c | 28 ++++++++++++++--------------
> 1 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/block/raw-posix.c b/block/raw-posix.c
> index 2d1bc13..719a590 100644
> --- a/block/raw-posix.c
> +++ b/block/raw-posix.c
> @@ -112,7 +112,7 @@
> reopen it to see if the disk has been changed */
> #define FD_OPEN_TIMEOUT (1000000000)
>
> -#define MAX_BLOCKSIZE 4096
> +#define MAX_BLOCKSIZE 4096
>
> typedef struct BDRVRawState {
> int fd;
> @@ -494,7 +494,7 @@ again:
> #endif
> if (!fstat(fd, &sb) && (S_IFCHR & sb.st_mode)) {
> #ifdef DIOCGMEDIASIZE
> - if (ioctl(fd, DIOCGMEDIASIZE, (off_t *)&size))
> + if (ioctl(fd, DIOCGMEDIASIZE, (off_t *)&size))
> #elif defined(DIOCGPART)
> {
> struct partinfo pi;
> @@ -894,7 +894,7 @@ static int hdev_has_zero_init(BlockDriverState *bs)
>
> static BlockDriver bdrv_host_device = {
> .format_name = "host_device",
> - .protocol_name = "host_device",
> + .protocol_name = "host_device",
> .instance_size = sizeof(BDRVRawState),
> .bdrv_probe_device = hdev_probe_device,
> .bdrv_file_open = hdev_open,
> @@ -903,12 +903,12 @@ static BlockDriver bdrv_host_device = {
> .create_options = raw_create_options,
> .bdrv_has_zero_init = hdev_has_zero_init,
>
> - .bdrv_aio_readv = raw_aio_readv,
> - .bdrv_aio_writev = raw_aio_writev,
> - .bdrv_aio_flush = raw_aio_flush,
> + .bdrv_aio_readv = raw_aio_readv,
> + .bdrv_aio_writev = raw_aio_writev,
> + .bdrv_aio_flush = raw_aio_flush,
>
> .bdrv_truncate = raw_truncate,
> - .bdrv_getlength = raw_getlength,
> + .bdrv_getlength = raw_getlength,
> .bdrv_get_allocated_file_size
> = raw_get_allocated_file_size,
>
> @@ -1015,7 +1015,7 @@ static BlockDriver bdrv_host_floppy = {
> .format_name = "host_floppy",
> .protocol_name = "host_floppy",
> .instance_size = sizeof(BDRVRawState),
> - .bdrv_probe_device = floppy_probe_device,
> + .bdrv_probe_device = floppy_probe_device,
> .bdrv_file_open = floppy_open,
> .bdrv_close = raw_close,
> .bdrv_create = hdev_create,
> @@ -1024,10 +1024,10 @@ static BlockDriver bdrv_host_floppy = {
>
> .bdrv_aio_readv = raw_aio_readv,
> .bdrv_aio_writev = raw_aio_writev,
> - .bdrv_aio_flush = raw_aio_flush,
> + .bdrv_aio_flush = raw_aio_flush,
>
> .bdrv_truncate = raw_truncate,
> - .bdrv_getlength = raw_getlength,
> + .bdrv_getlength = raw_getlength,
> .bdrv_get_allocated_file_size
> = raw_get_allocated_file_size,
>
> @@ -1114,7 +1114,7 @@ static BlockDriver bdrv_host_cdrom = {
> .format_name = "host_cdrom",
> .protocol_name = "host_cdrom",
> .instance_size = sizeof(BDRVRawState),
> - .bdrv_probe_device = cdrom_probe_device,
> + .bdrv_probe_device = cdrom_probe_device,
> .bdrv_file_open = cdrom_open,
> .bdrv_close = raw_close,
> .bdrv_create = hdev_create,
> @@ -1123,7 +1123,7 @@ static BlockDriver bdrv_host_cdrom = {
>
> .bdrv_aio_readv = raw_aio_readv,
> .bdrv_aio_writev = raw_aio_writev,
> - .bdrv_aio_flush = raw_aio_flush,
> + .bdrv_aio_flush = raw_aio_flush,
>
> .bdrv_truncate = raw_truncate,
> .bdrv_getlength = raw_getlength,
> @@ -1233,7 +1233,7 @@ static BlockDriver bdrv_host_cdrom = {
> .format_name = "host_cdrom",
> .protocol_name = "host_cdrom",
> .instance_size = sizeof(BDRVRawState),
> - .bdrv_probe_device = cdrom_probe_device,
> + .bdrv_probe_device = cdrom_probe_device,
> .bdrv_file_open = cdrom_open,
> .bdrv_close = raw_close,
> .bdrv_create = hdev_create,
> @@ -1242,7 +1242,7 @@ static BlockDriver bdrv_host_cdrom = {
>
> .bdrv_aio_readv = raw_aio_readv,
> .bdrv_aio_writev = raw_aio_writev,
> - .bdrv_aio_flush = raw_aio_flush,
> + .bdrv_aio_flush = raw_aio_flush,
>
> .bdrv_truncate = raw_truncate,
> .bdrv_getlength = raw_getlength,
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
WARNING: multiple messages have this Message-ID (diff)
From: "Andreas Färber" <afaerber@suse.de>
To: Peter Portante <peter.portante@redhat.com>
Cc: qemu-trivial@nongnu.org, Kevin Wolf <kwolf@redhat.com>,
qemu-devel@nongnu.org, Peter Portante <pportant@redhat.com>
Subject: Re: [Qemu-devel] [PATCH] Whitespace clean up.
Date: Thu, 22 Mar 2012 15:42:13 +0100 [thread overview]
Message-ID: <4F6B3A45.1000306@suse.de> (raw)
In-Reply-To: <1332354187-15720-1-git-send-email-peter.portante@redhat.com>
For one, while non-functional, this patch should probably be reviewed by
the block maintainer to not interfere with already queued patches.
Then the subject should indicate which part of code it touches, like
"block: " or "block/raw-posix.c: ". If Kevin agrees to merge this patch
I would suggest to amend the commit message saying that this is
converting tabs to spaces.
We don't usually place a period after the subject line (which happens to
not be a sentence) but that's an irrelevant detail. :)
Our policy has been to not apply formatting-only fixes without an
obvious reason. Is there a patch following that depends on this one?
That being said, the code movement looks correct.
Andreas
Am 21.03.2012 19:23, schrieb Peter Portante:
> Signed-off-by: Peter Portante <pportant@redhat.com>
> ---
> block/raw-posix.c | 28 ++++++++++++++--------------
> 1 files changed, 14 insertions(+), 14 deletions(-)
>
> diff --git a/block/raw-posix.c b/block/raw-posix.c
> index 2d1bc13..719a590 100644
> --- a/block/raw-posix.c
> +++ b/block/raw-posix.c
> @@ -112,7 +112,7 @@
> reopen it to see if the disk has been changed */
> #define FD_OPEN_TIMEOUT (1000000000)
>
> -#define MAX_BLOCKSIZE 4096
> +#define MAX_BLOCKSIZE 4096
>
> typedef struct BDRVRawState {
> int fd;
> @@ -494,7 +494,7 @@ again:
> #endif
> if (!fstat(fd, &sb) && (S_IFCHR & sb.st_mode)) {
> #ifdef DIOCGMEDIASIZE
> - if (ioctl(fd, DIOCGMEDIASIZE, (off_t *)&size))
> + if (ioctl(fd, DIOCGMEDIASIZE, (off_t *)&size))
> #elif defined(DIOCGPART)
> {
> struct partinfo pi;
> @@ -894,7 +894,7 @@ static int hdev_has_zero_init(BlockDriverState *bs)
>
> static BlockDriver bdrv_host_device = {
> .format_name = "host_device",
> - .protocol_name = "host_device",
> + .protocol_name = "host_device",
> .instance_size = sizeof(BDRVRawState),
> .bdrv_probe_device = hdev_probe_device,
> .bdrv_file_open = hdev_open,
> @@ -903,12 +903,12 @@ static BlockDriver bdrv_host_device = {
> .create_options = raw_create_options,
> .bdrv_has_zero_init = hdev_has_zero_init,
>
> - .bdrv_aio_readv = raw_aio_readv,
> - .bdrv_aio_writev = raw_aio_writev,
> - .bdrv_aio_flush = raw_aio_flush,
> + .bdrv_aio_readv = raw_aio_readv,
> + .bdrv_aio_writev = raw_aio_writev,
> + .bdrv_aio_flush = raw_aio_flush,
>
> .bdrv_truncate = raw_truncate,
> - .bdrv_getlength = raw_getlength,
> + .bdrv_getlength = raw_getlength,
> .bdrv_get_allocated_file_size
> = raw_get_allocated_file_size,
>
> @@ -1015,7 +1015,7 @@ static BlockDriver bdrv_host_floppy = {
> .format_name = "host_floppy",
> .protocol_name = "host_floppy",
> .instance_size = sizeof(BDRVRawState),
> - .bdrv_probe_device = floppy_probe_device,
> + .bdrv_probe_device = floppy_probe_device,
> .bdrv_file_open = floppy_open,
> .bdrv_close = raw_close,
> .bdrv_create = hdev_create,
> @@ -1024,10 +1024,10 @@ static BlockDriver bdrv_host_floppy = {
>
> .bdrv_aio_readv = raw_aio_readv,
> .bdrv_aio_writev = raw_aio_writev,
> - .bdrv_aio_flush = raw_aio_flush,
> + .bdrv_aio_flush = raw_aio_flush,
>
> .bdrv_truncate = raw_truncate,
> - .bdrv_getlength = raw_getlength,
> + .bdrv_getlength = raw_getlength,
> .bdrv_get_allocated_file_size
> = raw_get_allocated_file_size,
>
> @@ -1114,7 +1114,7 @@ static BlockDriver bdrv_host_cdrom = {
> .format_name = "host_cdrom",
> .protocol_name = "host_cdrom",
> .instance_size = sizeof(BDRVRawState),
> - .bdrv_probe_device = cdrom_probe_device,
> + .bdrv_probe_device = cdrom_probe_device,
> .bdrv_file_open = cdrom_open,
> .bdrv_close = raw_close,
> .bdrv_create = hdev_create,
> @@ -1123,7 +1123,7 @@ static BlockDriver bdrv_host_cdrom = {
>
> .bdrv_aio_readv = raw_aio_readv,
> .bdrv_aio_writev = raw_aio_writev,
> - .bdrv_aio_flush = raw_aio_flush,
> + .bdrv_aio_flush = raw_aio_flush,
>
> .bdrv_truncate = raw_truncate,
> .bdrv_getlength = raw_getlength,
> @@ -1233,7 +1233,7 @@ static BlockDriver bdrv_host_cdrom = {
> .format_name = "host_cdrom",
> .protocol_name = "host_cdrom",
> .instance_size = sizeof(BDRVRawState),
> - .bdrv_probe_device = cdrom_probe_device,
> + .bdrv_probe_device = cdrom_probe_device,
> .bdrv_file_open = cdrom_open,
> .bdrv_close = raw_close,
> .bdrv_create = hdev_create,
> @@ -1242,7 +1242,7 @@ static BlockDriver bdrv_host_cdrom = {
>
> .bdrv_aio_readv = raw_aio_readv,
> .bdrv_aio_writev = raw_aio_writev,
> - .bdrv_aio_flush = raw_aio_flush,
> + .bdrv_aio_flush = raw_aio_flush,
>
> .bdrv_truncate = raw_truncate,
> .bdrv_getlength = raw_getlength,
--
SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany
GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg
next prev parent reply other threads:[~2012-03-22 14:42 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-21 18:23 [Qemu-trivial] [PATCH] Whitespace clean up Peter Portante
2012-03-21 18:23 ` [Qemu-devel] " Peter Portante
2012-03-22 14:42 ` Andreas Färber [this message]
2012-03-22 14:42 ` Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F6B3A45.1000306@suse.de \
--to=afaerber@suse.de \
--cc=kwolf@redhat.com \
--cc=peter.portante@redhat.com \
--cc=pportant@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-trivial@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.