From: Antti Palosaari <crope@iki.fi>
To: Gianluca Gennari <gennarone@gmail.com>
Cc: linux-media@vger.kernel.org, mchehab@redhat.com
Subject: Re: [PATCH 1/3] cxd2820r: tweak search algorithm behavior
Date: Fri, 23 Mar 2012 14:49:38 +0200 [thread overview]
Message-ID: <4F6C7162.50900@iki.fi> (raw)
In-Reply-To: <1331832829-4580-2-git-send-email-gennarone@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Still I am little bit sceptical about that since dvb_frontend.h comments
are speaking signal search - not for full LOCK. Maybe there is room for
improvement somewhere else. Anyhow, better to merge that as now.
regards
Antti
On 15.03.2012 19:33, Gianluca Gennari wrote:
> MPIS based STBs running 3.x kernels and the Enigma2 OS are not able to tune
> DVB-T channels with the PCTV 290e using the current cxd2820r driver.
> DVB-T2 channels instead work properly.
>
> This patch fixes the problem by changing the condition to break out from the
> wait lock loop in the "search" function of the cxd2820r demodulator from
> FE_HAS_SIGNAL to FE_HAS_LOCK.
>
> As a consequence, the "search" function of the demodulator driver now returns
> DVBFE_ALGO_SEARCH_SUCCESS only if the frequency lock is successfully acquired.
>
> This behavior seems consistent with other demodulator drivers (e.g. stv090x,
> hd29l2, stv0900, stb0899, mb86a16).
>
> This patch has been successfully tested with DVB-T and DVB-T2 signals,
> on both PC and the mipsel STB running Enigma2.
> No apparent side effect has been observed on PC applications like Kaffeine.
> DVB-C is not available in my country so it's not tested.
>
> Signed-off-by: Gianluca Gennari<gennarone@gmail.com>
> ---
> drivers/media/dvb/frontends/cxd2820r_core.c | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c
> index 5c7c2aa..3bba37d 100644
> --- a/drivers/media/dvb/frontends/cxd2820r_core.c
> +++ b/drivers/media/dvb/frontends/cxd2820r_core.c
> @@ -526,12 +526,12 @@ static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe)
> if (ret)
> goto error;
>
> - if (status& FE_HAS_SIGNAL)
> + if (status& FE_HAS_LOCK)
> break;
> }
>
> /* check if we have a valid signal */
> - if (status) {
> + if (status& FE_HAS_LOCK) {
> priv->last_tune_failed = 0;
> return DVBFE_ALGO_SEARCH_SUCCESS;
> } else {
--
http://palosaari.fi/
next prev parent reply other threads:[~2012-03-23 12:49 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-15 17:33 [PATCH 0/3] cxd2820r: tweak search algorithm, enable LNA in DVB-T mode Gianluca Gennari
2012-03-15 17:33 ` [PATCH 1/3] cxd2820r: tweak search algorithm behavior Gianluca Gennari
2012-03-23 12:49 ` Antti Palosaari [this message]
2012-03-15 17:33 ` [PATCH 2/3] em28xx-dvb: enable LNA for cxd2820r in DVB-T mode Gianluca Gennari
2012-03-23 12:55 ` Antti Palosaari
[not found] ` <CACOeW9MNoRZOs5yruTSEqcj_576ih6cnpW-j0HzKCs0Qyy=P4w@mail.gmail.com>
2012-03-23 14:45 ` Mauro Carvalho Chehab
2012-03-15 17:33 ` [PATCH 3/3] cxd2820r: delete unused function cxd2820r_init_t2 Gianluca Gennari
2012-03-23 12:50 ` Antti Palosaari
2012-03-15 17:41 ` [PATCH 0/3] cxd2820r: tweak search algorithm, enable LNA in DVB-T mode Mauro Carvalho Chehab
2012-03-15 17:49 ` Antti Palosaari
2012-03-15 18:06 ` Mauro Carvalho Chehab
2012-03-15 18:07 ` Gianluca Gennari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F6C7162.50900@iki.fi \
--to=crope@iki.fi \
--cc=gennarone@gmail.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.