From: "ANEZAKI, Akira" <fireblade1230@yahoo.co.jp>
To: Gwendal Grignou <gwendal@google.com>
Cc: IDE/ATA development list <linux-ide@vger.kernel.org>,
Mark Lord <kernel@teksavvy.com>,
Linux Kernel <linux-kernel@vger.kernel.org>,
Jeff Garzik <jgarzik@pobox.com>
Subject: Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
Date: Wed, 28 Mar 2012 14:22:47 +0900 [thread overview]
Message-ID: <4F72A027.7040907@yahoo.co.jp> (raw)
In-Reply-To: <CAMHSBOWOLj0igQYK16qQ+BznzmS2KV89dw4ahRz0h5tUw+YOdQ@mail.gmail.com>
Hello Gwendal,
(2012/03/27 20:17), Gwendal Grignou wrote:
> Regarding the machine with 10 disks, I see that all the drives have
> been found; I don't see any other error from the /var/log/messages
> snippet that could explain md not finding the volumes.
I have attached 11 disks log. (I'm sorry for my mistake!) RAID1 is
assembled only with 1 partition. The RAID1s are md1 and md2.
Best Regards,
Akira
--- 3.2.10 2pmp power cycle error on raid ---
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.2.10-3.fc16.i686.PAE (mockbuild@x86-02.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 15 20:37:01 UTC 2012
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
> [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
> [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI present.
> [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7360/MS-7360, BIOS V1.AB2 05/28/2007
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> [ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x1000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CFFFF write-protect
> [ 0.000000] D0000-DFFFF uncachable
> [ 0.000000] E0000-EFFFF write-through
> [ 0.000000] F0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask F80000000 write-back
> [ 0.000000] 1 base 080000000 mask FC0000000 write-back
> [ 0.000000] 2 disabled
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] found SMP MP-table at [c00ff780] ff780
> [ 0.000000] initial memory mapped : 0 - 01200000
> [ 0.000000] Base memory trampoline at [c0097000] 97000 size 16384
> [ 0.000000] init_memory_mapping: 0000000000000000-00000000375fe000
> [ 0.000000] 0000000000 - 0000200000 page 4k
> [ 0.000000] 0000200000 - 0037400000 page 2M
> [ 0.000000] 0037400000 - 00375fe000 page 4k
> [ 0.000000] kernel direct mapping tables up to 375fe000 @ 11f8000-1200000
> [ 0.000000] RAMDISK: 37081000 - 37ff0000
> [ 0.000000] Allocated new RAMDISK: 36112000 - 37080e5b
> [ 0.000000] Move RAMDISK from 0000000037081000 - 0000000037fefe5a to 36112000 - 37080e5a
> [ 0.000000] ACPI: RSDP 000f95c0 00014 (v00 ACPIAM)
> [ 0.000000] ACPI: RSDT bffb0000 00044 (v01 Mouse Computer 20070528 MSFT 00000097)
> [ 0.000000] ACPI: FACP bffb0200 00084 (v01 052807 FACP1414 20070528 MSFT 00000097)
> [ 0.000000] ACPI: DSDT bffb05c0 05564 (v01 0AAAA 0AAAA000 00000000 INTL 20051117)
> [ 0.000000] ACPI: FACS bffbe000 00040
> [ 0.000000] ACPI: APIC bffb0390 0006C (v01 052807 APIC1414 20070528 MSFT 00000097)
> [ 0.000000] ACPI: MCFG bffb0400 0003C (v01 052807 OEMMCFG 20070528 MSFT 00000097)
> [ 0.000000] ACPI: SLIC bffb0440 00176 (v01 Mouse Computer 20070528 MSFT 00000097)
> [ 0.000000] ACPI: SLIC bffb0440 00176 (v01 Mouse Computer 20070528 MSFT 00000097)
> [ 0.000000] ACPI: OEMB bffbe040 00071 (v01 052807 OEMB1414 20070528 MSFT 00000097)
> [ 0.000000] ACPI: GSCI bffbe0c0 02024 (v01 052807 GMCHSCI 20070528 MSFT 00000097)
> [ 0.000000] ACPI: SSDT bffc1330 0082F (v01 DpgPmm CpuPm 00000012 INTL 20051117)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] 2185MB HIGHMEM available.
> [ 0.000000] 885MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 375fe000
> [ 0.000000] low ram: 0 - 375fe000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] Normal 0x00001000 -> 0x000375fe
> [ 0.000000] HighMem 0x000375fe -> 0x000bffb0
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009b
> [ 0.000000] 0: 0x00000100 -> 0x000bffb0
> [ 0.000000] On node 0 totalpages: 786235
> [ 0.000000] free_area_init_node: node 0, pgdat c0bb3bc0, node_mem_map f4912200
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 3947 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1740 pages used for memmap
> [ 0.000000] Normal zone: 220978 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 4372 pages used for memmap
> [ 0.000000] HighMem zone: 555166 pages, LIFO batch:31
> [ 0.000000] Using APIC driver default
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
> [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
> [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7200000 s34240 r0 d23104 u524288
> [ 0.000000] pcpu-alloc: s34240 r0 d23104 u524288 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780091
> [ 0.000000] Kernel command line: ro root=UUID=773cb4b3-4bb0-4705-b494-08cb9c2b5d73 LANG=ja_JP.UTF-8 KEYBOARDTYPE=pc KEYTABLE=jp106 rhgb quiet nomodeset
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Initializing CPU#0
> [ 0.000000] allocated 12581376 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] Initializing HighMem for node 0 (000375fe:000bffb0)
> [ 0.000000] Memory: 3081612k/3145408k available (5404k kernel code, 63328k reserved, 2569k data, 644k init, 2238152k highmem)
> [ 0.000000] virtual kernel memory layout:
> [ 0.000000] fixmap : 0xffa95000 - 0xfffff000 (5544 kB)
> [ 0.000000] pkmap : 0xff600000 - 0xff800000 (2048 kB)
> [ 0.000000] vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
> [ 0.000000] .init : 0xc0bca000 - 0xc0c6b000 ( 644 kB)
> [ 0.000000] .data : 0xc094723f - 0xc0bc9980 (2569 kB)
> [ 0.000000] .text : 0xc0400000 - 0xc094723f (5404 kB)
> [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
> [ 0.000000] CPU 0 irqstacks, hard=f380a000 soft=f380c000
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.000000] Detected 2402.216 MHz processor.
> [ 0.001001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4804.43 BogoMIPS (lpj=2402216)
> [ 0.001005] pid_max: default: 32768 minimum: 301
> [ 0.001024] Security Framework initialized
> [ 0.001032] SELinux: Initializing.
> [ 0.001039] SELinux: Starting in permissive mode
> [ 0.001086] Mount-cache hash table entries: 512
> [ 0.002117] Initializing cgroup subsys cpuacct
> [ 0.002122] Initializing cgroup subsys memory
> [ 0.002129] Initializing cgroup subsys devices
> [ 0.002131] Initializing cgroup subsys freezer
> [ 0.002133] Initializing cgroup subsys net_cls
> [ 0.002135] Initializing cgroup subsys blkio
> [ 0.002139] Initializing cgroup subsys perf_event
> [ 0.002162] CPU: Physical Processor ID: 0
> [ 0.002163] CPU: Processor Core ID: 0
> [ 0.002166] mce: CPU supports 6 MCE banks
> [ 0.002173] CPU0: Thermal monitoring enabled (TM2)
> [ 0.002175] using mwait in idle threads.
> [ 0.003140] ACPI: Core revision 20110623
> [ 0.006009] ftrace: allocating 22484 entries in 45 pages
> [ 0.007043] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.007393] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.018127] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
> [ 0.018998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
> [ 0.018998] PEBS disabled due to CPU errata.
> [ 0.018998] ... version: 2
> [ 0.018998] ... bit width: 40
> [ 0.018998] ... generic registers: 2
> [ 0.018998] ... value mask: 000000ffffffffff
> [ 0.018998] ... max period: 000000007fffffff
> [ 0.018998] ... fixed-purpose events: 3
> [ 0.018998] ... event mask: 0000000700000003
> [ 0.018998] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.018998] CPU 1 irqstacks, hard=f3902000 soft=f3904000
> [ 0.018998] Booting Node 0, Processors #1
> [ 0.018998] smpboot cpu 1: start_ip = 97000
> [ 0.001999] Initializing CPU#1
> [ 0.090019] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.090116] CPU 2 irqstacks, hard=f3930000 soft=f3932000
> [ 0.090118] #2
> [ 0.090119] smpboot cpu 2: start_ip = 97000
> [ 0.001999] Initializing CPU#2
> [ 0.162002] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.162084] CPU 3 irqstacks, hard=f393e000 soft=f3948000
> [ 0.162086] #3 Ok.
> [ 0.162088] smpboot cpu 3: start_ip = 97000
> [ 0.001999] Initializing CPU#3
> [ 0.233992] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.234017] Brought up 4 CPUs
> [ 0.234020] Total of 4 processors activated (19216.12 BogoMIPS).
> [ 0.235093] devtmpfs: initialized
> [ 0.235212] PM: Registering ACPI NVS region at bffbe000 (204800 bytes)
> [ 0.236839] atomic64 test passed for i586+ platform with CX8 and with SSE
> [ 0.236864] RTC time: 19:04:40, date: 03/26/12
> [ 0.236897] NET: Registered protocol family 16
> [ 0.237074] ACPI: bus type pci registered
> [ 0.237134] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.237137] PCI: not using MMCONFIG
> [ 0.237236] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
> [ 0.237293] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
> [ 0.237295] PCI: Using configuration type 1 for base access
> [ 0.238395] bio: create slab <bio-0> at 0
> [ 0.238395] ACPI: Added _OSI(Module Device)
> [ 0.238395] ACPI: Added _OSI(Processor Device)
> [ 0.238395] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.238395] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.239495] ACPI: EC: Detected MSI hardware, enabling workarounds.
> [ 0.239500] ACPI: EC: Look up EC in DSDT
> [ 0.240590] ACPI: Executed 1 blocks of module-level executable AML code
> [ 0.243103] ACPI: SSDT bffc00f0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
> [ 0.243325] ACPI: Dynamic OEM Table Load:
> [ 0.243328] ACPI: SSDT (null) 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
> [ 0.243565] ACPI: SSDT bffc0580 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
> [ 0.243786] ACPI: Dynamic OEM Table Load:
> [ 0.243789] ACPI: SSDT (null) 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
> [ 0.244029] ACPI: SSDT bffc0a10 00277 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
> [ 0.244253] ACPI: Dynamic OEM Table Load:
> [ 0.244255] ACPI: SSDT (null) 00277 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
> [ 0.244489] ACPI: SSDT bffc0ea0 00277 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
> [ 0.244715] ACPI: Dynamic OEM Table Load:
> [ 0.244718] ACPI: SSDT (null) 00277 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
> [ 0.244937] ACPI: Interpreter enabled
> [ 0.244956] ACPI: (supports S0 S3 S4 S5)
> [ 0.244978] ACPI: Using IOAPIC for interrupt routing
> [ 0.244997] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.246009] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
> [ 0.246011] PCI: Using MMCONFIG for extended config space
> [ 0.251297] ACPI: No dock devices found.
> [ 0.251299] HEST: Table not found.
> [ 0.251304] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
> [ 0.251465] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.251630] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
> [ 0.251633] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
> [ 0.251635] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
> [ 0.251638] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
> [ 0.251640] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
> [ 0.251642] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored)
> [ 0.251652] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
> [ 0.251693] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
> [ 0.251732] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 0.251735] pci 0000:00:01.0: PME# disabled
> [ 0.251770] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
> [ 0.251810] pci 0000:00:1a.0: reg 20: [io 0x9c00-0x9c1f]
> [ 0.251857] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
> [ 0.251897] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
> [ 0.251953] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
> [ 0.251977] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
> [ 0.252061] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 0.252066] pci 0000:00:1a.7: PME# disabled
> [ 0.252088] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
> [ 0.252102] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
> [ 0.252164] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.252168] pci 0000:00:1b.0: PME# disabled
> [ 0.252186] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
> [ 0.252250] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.252254] pci 0000:00:1c.0: PME# disabled
> [ 0.252273] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
> [ 0.252337] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.252341] pci 0000:00:1c.1: PME# disabled
> [ 0.252360] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
> [ 0.252424] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 0.252428] pci 0000:00:1c.2: PME# disabled
> [ 0.252448] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
> [ 0.252512] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 0.252515] pci 0000:00:1c.4: PME# disabled
> [ 0.252535] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
> [ 0.252599] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> [ 0.252602] pci 0000:00:1c.5: PME# disabled
> [ 0.252623] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
> [ 0.252663] pci 0000:00:1d.0: reg 20: [io 0x9800-0x981f]
> [ 0.252710] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
> [ 0.252750] pci 0000:00:1d.1: reg 20: [io 0x9480-0x949f]
> [ 0.252798] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
> [ 0.252838] pci 0000:00:1d.2: reg 20: [io 0x9400-0x941f]
> [ 0.252885] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
> [ 0.252924] pci 0000:00:1d.3: reg 20: [io 0x9080-0x909f]
> [ 0.252983] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
> [ 0.253003] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
> [ 0.253087] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.253091] pci 0000:00:1d.7: PME# disabled
> [ 0.253109] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
> [ 0.253166] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
> [ 0.253242] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
> [ 0.253287] pci 0000:00:1f.2: [8086:2921] type 0 class 0x000101
> [ 0.253301] pci 0000:00:1f.2: reg 10: [io 0x9000-0x9007]
> [ 0.253309] pci 0000:00:1f.2: reg 14: [io 0x8c00-0x8c03]
> [ 0.253316] pci 0000:00:1f.2: reg 18: [io 0x8880-0x8887]
> [ 0.253323] pci 0000:00:1f.2: reg 1c: [io 0x8800-0x8803]
> [ 0.253331] pci 0000:00:1f.2: reg 20: [io 0x8480-0x848f]
> [ 0.253338] pci 0000:00:1f.2: reg 24: [io 0x8400-0x840f]
> [ 0.253381] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
> [ 0.253395] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
> [ 0.253414] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
> [ 0.253445] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
> [ 0.253459] pci 0000:00:1f.5: reg 10: [io 0x8000-0x8007]
> [ 0.253466] pci 0000:00:1f.5: reg 14: [io 0x7c00-0x7c03]
> [ 0.253474] pci 0000:00:1f.5: reg 18: [io 0x7880-0x7887]
> [ 0.253481] pci 0000:00:1f.5: reg 1c: [io 0x7800-0x7803]
> [ 0.253489] pci 0000:00:1f.5: reg 20: [io 0x7480-0x748f]
> [ 0.253496] pci 0000:00:1f.5: reg 24: [io 0x7400-0x740f]
> [ 0.253568] pci 0000:01:00.0: [10de:0615] type 0 class 0x000300
> [ 0.253578] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
> [ 0.253589] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.253599] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
> [ 0.253606] pci 0000:01:00.0: reg 24: [io 0xac00-0xac7f]
> [ 0.253614] pci 0000:01:00.0: reg 30: [mem 0xfe7e0000-0xfe7fffff pref]
> [ 0.253665] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 0.253668] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
> [ 0.253671] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe7fffff]
> [ 0.253675] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.253711] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
> [ 0.253774] pci 0000:03:00.0: [1095:3132] type 0 class 0x000180
> [ 0.253800] pci 0000:03:00.0: reg 10: [mem 0xfe8ffc00-0xfe8ffc7f 64bit]
> [ 0.253820] pci 0000:03:00.0: reg 18: [mem 0xfe8f8000-0xfe8fbfff 64bit]
> [ 0.253834] pci 0000:03:00.0: reg 20: [io 0xbc00-0xbc7f]
> [ 0.253859] pci 0000:03:00.0: reg 30: [mem 0xfe800000-0xfe87ffff pref]
> [ 0.253923] pci 0000:03:00.0: supports D1 D2
> [ 0.253944] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.253949] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
> [ 0.253952] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
> [ 0.253956] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
> [ 0.254021] pci 0000:04:00.0: [1095:3132] type 0 class 0x000180
> [ 0.254047] pci 0000:04:00.0: reg 10: [mem 0xfe9ffc00-0xfe9ffc7f 64bit]
> [ 0.254067] pci 0000:04:00.0: reg 18: [mem 0xfe9f8000-0xfe9fbfff 64bit]
> [ 0.254081] pci 0000:04:00.0: reg 20: [io 0xcc00-0xcc7f]
> [ 0.254106] pci 0000:04:00.0: reg 30: [mem 0xfe900000-0xfe97ffff pref]
> [ 0.254170] pci 0000:04:00.0: supports D1 D2
> [ 0.254190] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.254195] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
> [ 0.254198] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
> [ 0.254202] pci 0000:00:1c.2: bridge window [mem 0xfe900000-0xfe9fffff]
> [ 0.254258] pci 0000:05:00.0: [11ab:6121] type 0 class 0x000101
> [ 0.254274] pci 0000:05:00.0: reg 10: [io 0xdc00-0xdc07]
> [ 0.254285] pci 0000:05:00.0: reg 14: [io 0xd880-0xd883]
> [ 0.254296] pci 0000:05:00.0: reg 18: [io 0xd800-0xd807]
> [ 0.254308] pci 0000:05:00.0: reg 1c: [io 0xd480-0xd483]
> [ 0.254319] pci 0000:05:00.0: reg 20: [io 0xd400-0xd40f]
> [ 0.254330] pci 0000:05:00.0: reg 24: [mem 0xfeaffc00-0xfeafffff]
> [ 0.254392] pci 0000:05:00.0: supports D1
> [ 0.254394] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
> [ 0.254398] pci 0000:05:00.0: PME# disabled
> [ 0.254414] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.254418] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
> [ 0.254422] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
> [ 0.254426] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
> [ 0.254487] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
> [ 0.254505] pci 0000:06:00.0: reg 10: [io 0xe800-0xe8ff]
> [ 0.254535] pci 0000:06:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
> [ 0.254570] pci 0000:06:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
> [ 0.254647] pci 0000:06:00.0: supports D1 D2
> [ 0.254649] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
> [ 0.254654] pci 0000:06:00.0: PME# disabled
> [ 0.254676] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.254680] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
> [ 0.254684] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
> [ 0.254688] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
> [ 0.254747] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
> [ 0.254756] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
> [ 0.254759] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
> [ 0.254784] pci_bus 0000:00: on NUMA node 0
> [ 0.254787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.254932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> [ 0.255040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> [ 0.255081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
> [ 0.255122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
> [ 0.255165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
> [ 0.255205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> [ 0.255334] pci0000:00: Requesting ACPI _OSC control (0x1d)
> [ 0.255490] pci0000:00: ACPI _OSC control (0x1d) granted
> [ 0.264136] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 0.264180] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
> [ 0.264220] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
> [ 0.264262] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
> [ 0.264304] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
> [ 0.264349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
> [ 0.264391] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
> [ 0.264433] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 0.264512] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.264512] vgaarb: loaded
> [ 0.264512] vgaarb: bridge control possible 0000:01:00.0
> [ 0.264512] SCSI subsystem initialized
> [ 0.264530] libata version 3.00 loaded.
> [ 0.264530] usbcore: registered new interface driver usbfs
> [ 0.264530] usbcore: registered new interface driver hub
> [ 0.264530] usbcore: registered new device driver usb
> [ 0.264530] PCI: Using ACPI for IRQ routing
> [ 0.264530] PCI: pci_cache_line_size set to 64 bytes
> [ 0.264530] reserve RAM buffer: 000000000009b800 - 000000000009ffff
> [ 0.264530] reserve RAM buffer: 00000000bffb0000 - 00000000bfffffff
> [ 0.265003] NetLabel: Initializing
> [ 0.265005] NetLabel: domain hash size = 128
> [ 0.265006] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.265016] NetLabel: unlabeled traffic allowed by default
> [ 0.272845] pnp: PnP ACPI init
> [ 0.272860] ACPI: bus type pnp registered
> [ 0.272959] pnp 00:00: [bus 00-ff]
> [ 0.272961] pnp 00:00: [io 0x0cf8-0x0cff]
> [ 0.272964] pnp 00:00: [io 0x0000-0x0cf7 window]
> [ 0.272971] pnp 00:00: [io 0x0d00-0xffff window]
> [ 0.272973] pnp 00:00: [mem 0x000a0000-0x000bffff window]
> [ 0.272975] pnp 00:00: [mem 0x000d0000-0x000dffff window]
> [ 0.272980] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
> [ 0.272982] pnp 00:00: [mem 0xf0000000-0xffffffff window]
> [ 0.273030] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
> [ 0.273039] pnp 00:01: [mem 0xfed14000-0xfed19fff]
> [ 0.273093] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
> [ 0.273096] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.273126] pnp 00:02: [dma 4]
> [ 0.273128] pnp 00:02: [io 0x0000-0x000f]
> [ 0.273130] pnp 00:02: [io 0x0081-0x0083]
> [ 0.273131] pnp 00:02: [io 0x0087]
> [ 0.273133] pnp 00:02: [io 0x0089-0x008b]
> [ 0.273135] pnp 00:02: [io 0x008f]
> [ 0.273136] pnp 00:02: [io 0x00c0-0x00df]
> [ 0.273161] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.273171] pnp 00:03: [io 0x0070-0x0071]
> [ 0.273181] pnp 00:03: [irq 8]
> [ 0.273207] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.273215] pnp 00:04: [io 0x0061]
> [ 0.273240] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.273248] pnp 00:05: [io 0x00f0-0x00ff]
> [ 0.273252] pnp 00:05: [irq 13]
> [ 0.273277] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.273510] pnp 00:06: [io 0x03f8-0x03ff]
> [ 0.273515] pnp 00:06: [irq 4]
> [ 0.273517] pnp 00:06: [dma 0 disabled]
> [ 0.273582] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.273983] pnp 00:07: [io 0x0378-0x037f]
> [ 0.273988] pnp 00:07: [irq 7]
> [ 0.273991] pnp 00:07: [dma 0 disabled]
> [ 0.274116] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
> [ 0.274142] pnp 00:08: [io 0x0060]
> [ 0.274144] pnp 00:08: [io 0x0064]
> [ 0.274149] pnp 00:08: [irq 1]
> [ 0.274184] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
> [ 0.274225] pnp 00:09: [irq 12]
> [ 0.274258] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
> [ 0.274337] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
> [ 0.274339] pnp 00:0a: [io 0x0a00-0x0adf]
> [ 0.274341] pnp 00:0a: [io 0x0ae0-0x0aef]
> [ 0.274392] system 00:0a: [io 0x0a00-0x0adf] has been reserved
> [ 0.274395] system 00:0a: [io 0x0ae0-0x0aef] has been reserved
> [ 0.274398] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274466] pnp 00:0b: [io 0x0010-0x001f]
> [ 0.274469] pnp 00:0b: [io 0x0022-0x003f]
> [ 0.274470] pnp 00:0b: [io 0x0044-0x005f]
> [ 0.274472] pnp 00:0b: [io 0x0062-0x0063]
> [ 0.274474] pnp 00:0b: [io 0x0065-0x006f]
> [ 0.274476] pnp 00:0b: [io 0x0072-0x007f]
> [ 0.274477] pnp 00:0b: [io 0x0080]
> [ 0.274479] pnp 00:0b: [io 0x0084-0x0086]
> [ 0.274481] pnp 00:0b: [io 0x0088]
> [ 0.274485] pnp 00:0b: [io 0x008c-0x008e]
> [ 0.274486] pnp 00:0b: [io 0x0090-0x009f]
> [ 0.274488] pnp 00:0b: [io 0x00a2-0x00bf]
> [ 0.274490] pnp 00:0b: [io 0x00e0-0x00ef]
> [ 0.274492] pnp 00:0b: [io 0x04d0-0x04d1]
> [ 0.274494] pnp 00:0b: [io 0x0800-0x087f]
> [ 0.274496] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
> [ 0.274498] pnp 00:0b: [io 0x0480-0x04bf]
> [ 0.274500] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
> [ 0.274502] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
> [ 0.274571] system 00:0b: [io 0x04d0-0x04d1] has been reserved
> [ 0.274573] system 00:0b: [io 0x0800-0x087f] has been reserved
> [ 0.274576] system 00:0b: [io 0x0480-0x04bf] has been reserved
> [ 0.274578] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.274581] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
> [ 0.274584] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274654] pnp 00:0c: [mem 0xffb00000-0xffbfffff]
> [ 0.274657] pnp 00:0c: [mem 0xfff00000-0xffffffff]
> [ 0.274685] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
> [ 0.274724] pnp 00:0d: [mem 0xffc00000-0xffefffff]
> [ 0.274774] system 00:0d: [mem 0xffc00000-0xffefffff] has been reserved
> [ 0.274777] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274850] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
> [ 0.274852] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
> [ 0.274900] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
> [ 0.274903] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 0.274906] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274936] pnp 00:0f: [mem 0xe0000000-0xefffffff]
> [ 0.274991] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.274994] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.275143] pnp 00:10: [mem 0x00000000-0x0009ffff]
> [ 0.275145] pnp 00:10: [mem 0x000c0000-0x000cffff]
> [ 0.275147] pnp 00:10: [mem 0x000e0000-0x000fffff]
> [ 0.275149] pnp 00:10: [mem 0x00100000-0xbfffffff]
> [ 0.275151] pnp 00:10: [mem 0x00000000-0xffffffffffffffff disabled]
> [ 0.275210] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 0.275212] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
> [ 0.275215] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
> [ 0.275218] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
> [ 0.275221] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.275337] pnp: PnP ACPI: found 17 devices
> [ 0.275339] ACPI: ACPI bus type pnp unregistered
> [ 0.312130] Switching to clocksource acpi_pm
> [ 0.312164] PCI: max bus depth: 1 pci_try_num: 2
> [ 0.312210] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
> [ 0.312213] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.312216] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.312220] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
> [ 0.312223] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0800000-0xc09fffff]
> [ 0.312226] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0a00000-0xc0bfffff 64bit pref]
> [ 0.312229] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
> [ 0.312232] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 0.312234] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
> [ 0.312238] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe7fffff]
> [ 0.312241] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.312245] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
> [ 0.312248] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> [ 0.312253] pci 0000:00:1c.0: bridge window [mem 0xc0800000-0xc09fffff]
> [ 0.312256] pci 0000:00:1c.0: bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref]
> [ 0.312262] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
> [ 0.312264] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
> [ 0.312269] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
> [ 0.312273] pci 0000:00:1c.1: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
> [ 0.312278] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
> [ 0.312281] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
> [ 0.312285] pci 0000:00:1c.2: bridge window [mem 0xfe900000-0xfe9fffff]
> [ 0.312289] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.312294] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
> [ 0.312297] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
> [ 0.312301] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
> [ 0.312305] pci 0000:00:1c.4: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.312311] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
> [ 0.312313] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
> [ 0.312318] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
> [ 0.312321] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
> [ 0.312327] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
> [ 0.312346] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.312349] pci 0000:00:01.0: setting latency timer to 64
> [ 0.312354] pci 0000:00:1c.0: enabling device (0104 -> 0107)
> [ 0.312361] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.312365] pci 0000:00:1c.0: setting latency timer to 64
> [ 0.312370] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> [ 0.312374] pci 0000:00:1c.1: setting latency timer to 64
> [ 0.312382] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.312385] pci 0000:00:1c.2: setting latency timer to 64
> [ 0.312390] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.312394] pci 0000:00:1c.4: setting latency timer to 64
> [ 0.312399] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> [ 0.312403] pci 0000:00:1c.5: setting latency timer to 64
> [ 0.312408] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.312411] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
> [ 0.312414] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
> [ 0.312416] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
> [ 0.312418] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe7fffff]
> [ 0.312420] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.312423] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
> [ 0.312425] pci_bus 0000:02: resource 1 [mem 0xc0800000-0xc09fffff]
> [ 0.312427] pci_bus 0000:02: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref]
> [ 0.312429] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
> [ 0.312431] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
> [ 0.312433] pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
> [ 0.312435] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
> [ 0.312437] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
> [ 0.312440] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.312442] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
> [ 0.312444] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfeafffff]
> [ 0.312446] pci_bus 0000:05: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.312448] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
> [ 0.312450] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff]
> [ 0.312452] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
> [ 0.312455] pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
> [ 0.312457] pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff]
> [ 0.312481] NET: Registered protocol family 2
> [ 0.312518] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.312616] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.312960] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.313071] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.313073] TCP reno registered
> [ 0.313076] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.313084] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.313141] NET: Registered protocol family 1
> [ 0.313158] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.313174] pci 0000:00:1a.0: PCI INT A disabled
> [ 0.313186] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 0.313201] pci 0000:00:1a.1: PCI INT B disabled
> [ 0.313208] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.313229] pci 0000:00:1a.7: PCI INT C disabled
> [ 0.313248] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 0.313263] pci 0000:00:1d.0: PCI INT A disabled
> [ 0.313272] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 0.313286] pci 0000:00:1d.1: PCI INT B disabled
> [ 0.313292] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.313307] pci 0000:00:1d.2: PCI INT C disabled
> [ 0.313313] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
> [ 0.313327] pci 0000:00:1d.3: PCI INT D disabled
> [ 0.313335] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 0.313347] pci 0000:00:1d.7: PCI INT A disabled
> [ 0.313369] pci 0000:01:00.0: Boot video device
> [ 0.313382] PCI: CLS 32 bytes, default 64
> [ 0.313436] Unpacking initramfs...
> [ 0.654154] Freeing initrd memory: 15804k freed
> [ 0.661058] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> [ 0.661061] apm: disabled - APM is not SMP safe.
> [ 0.661195] Intel AES-NI instructions are not detected.
> [ 0.661331] audit: initializing netlink socket (disabled)
> [ 0.661346] type=2000 audit(1332788680.661:1): initialized
> [ 0.684746] highmem bounce pool size: 64 pages
> [ 0.684750] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.696126] VFS: Disk quotas dquot_6.5.2
> [ 0.696180] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.696691] msgmni has been set to 1678
> [ 0.696750] SELinux: Registering netfilter hooks
> [ 0.697186] alg: No test for stdrng (krng)
> [ 0.697200] NET: Registered protocol family 38
> [ 0.697242] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 0.697279] io scheduler noop registered
> [ 0.697281] io scheduler deadline registered
> [ 0.697287] io scheduler cfq registered (default)
> [ 0.697505] pcieport 0000:00:01.0: setting latency timer to 64
> [ 0.697535] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
> [ 0.697599] pcieport 0000:00:1c.0: setting latency timer to 64
> [ 0.697633] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
> [ 0.697721] pcieport 0000:00:1c.1: setting latency timer to 64
> [ 0.697755] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
> [ 0.697842] pcieport 0000:00:1c.2: setting latency timer to 64
> [ 0.697875] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
> [ 0.697964] pcieport 0000:00:1c.4: setting latency timer to 64
> [ 0.697996] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
> [ 0.698103] pcieport 0000:00:1c.5: setting latency timer to 64
> [ 0.698136] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
> [ 0.698254] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
> [ 0.698257] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
> [ 0.698260] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
> [ 0.698276] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
> [ 0.698280] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
> [ 0.698296] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
> [ 0.698298] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
> [ 0.698301] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
> [ 0.698317] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
> [ 0.698319] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
> [ 0.698323] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
> [ 0.698338] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
> [ 0.698340] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
> [ 0.698344] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
> [ 0.698360] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
> [ 0.698362] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
> [ 0.698366] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
> [ 0.698385] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.698435] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 1462 ss_did 7360
> [ 0.698453] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
> [ 0.698462] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2942 ss_vid 1462 ss_did 7360
> [ 0.698479] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
> [ 0.698488] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 1462 ss_did 7360
> [ 0.698505] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
> [ 0.698514] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2948 ss_vid 1462 ss_did 7360
> [ 0.698531] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
> [ 0.698541] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 1462 ss_did 7360
> [ 0.698557] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
> [ 0.698566] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.698568] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.698871] intel_idle: MWAIT substates: 0x20
> [ 0.698873] intel_idle: does not run on family 6 model 15
> [ 0.698943] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
> [ 0.698947] ACPI: Power Button [PWRB]
> [ 0.698992] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 0.698995] ACPI: Power Button [PWRF]
> [ 0.700685] ERST: Table is not found!
> [ 0.700687] GHES: HEST is not enabled!
> [ 0.700700] isapnp: Scanning for PnP cards...
> [ 1.056514] isapnp: No Plug & Play device found
> [ 1.056602] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 1.077088] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.098724] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.107360] Non-volatile memory driver v1.3
> [ 1.107362] Linux agpgart interface v0.103
> [ 1.108483] loop: module loaded
> [ 1.108543] ahci 0000:05:00.0: version 3.0
> [ 1.108566] ata_piix 0000:00:1f.2: version 2.13
> [ 1.108578] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 1.108582] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
> [ 1.108614] ata_piix 0000:00:1f.2: setting latency timer to 64
> [ 1.108848] scsi0 : ata_piix
> [ 1.108930] scsi1 : ata_piix
> [ 1.110108] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
> [ 1.110112] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
> [ 1.110129] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 1.110136] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
> [ 1.110179] ata_piix 0000:00:1f.5: setting latency timer to 64
> [ 1.110404] scsi2 : ata_piix
> [ 1.110484] scsi3 : ata_piix
> [ 1.111539] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 19
> [ 1.111543] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 19
> [ 1.111601] Fixed MDIO Bus: probed
> [ 1.111668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.111682] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 1.111697] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> [ 1.111700] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> [ 1.111771] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> [ 1.111792] ehci_hcd 0000:00:1a.7: debug port 1
> [ 1.115672] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
> [ 1.115686] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
> [ 1.125019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 1.125038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.125040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.125043] usb usb1: Product: EHCI Host Controller
> [ 1.125044] usb usb1: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE ehci_hcd
> [ 1.125046] usb usb1: SerialNumber: 0000:00:1a.7
> [ 1.125163] hub 1-0:1.0: USB hub found
> [ 1.125167] hub 1-0:1.0: 4 ports detected
> [ 1.125238] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 1.125248] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 1.125250] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 1.125303] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> [ 1.125323] ehci_hcd 0000:00:1d.7: debug port 1
> [ 1.129222] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> [ 1.129235] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
> [ 1.139019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 1.139032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.139034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.139036] usb usb2: Product: EHCI Host Controller
> [ 1.139038] usb usb2: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE ehci_hcd
> [ 1.139040] usb usb2: SerialNumber: 0000:00:1d.7
> [ 1.139148] hub 2-0:1.0: USB hub found
> [ 1.139151] hub 2-0:1.0: 8 ports detected
> [ 1.139230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.139243] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.139258] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 1.139265] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 1.139267] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 1.139321] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> [ 1.139350] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009c00
> [ 1.139376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.139378] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.139380] usb usb3: Product: UHCI Host Controller
> [ 1.139382] usb usb3: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.139384] usb usb3: SerialNumber: 0000:00:1a.0
> [ 1.139491] hub 3-0:1.0: USB hub found
> [ 1.139494] hub 3-0:1.0: 2 ports detected
> [ 1.139560] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 1.139566] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 1.139569] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 1.139622] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> [ 1.139650] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
> [ 1.139675] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.139678] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.139680] usb usb4: Product: UHCI Host Controller
> [ 1.139682] usb usb4: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.139684] usb usb4: SerialNumber: 0000:00:1a.1
> [ 1.139788] hub 4-0:1.0: USB hub found
> [ 1.139792] hub 4-0:1.0: 2 ports detected
> [ 1.139858] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 1.139864] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 1.139867] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 1.139918] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
> [ 1.139938] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009800
> [ 1.139963] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.139966] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.139968] usb usb5: Product: UHCI Host Controller
> [ 1.139970] usb usb5: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.139972] usb usb5: SerialNumber: 0000:00:1d.0
> [ 1.140081] hub 5-0:1.0: USB hub found
> [ 1.140085] hub 5-0:1.0: 2 ports detected
> [ 1.140154] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 1.140160] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 1.140163] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 1.140224] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
> [ 1.140246] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009480
> [ 1.140271] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.140273] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.140275] usb usb6: Product: UHCI Host Controller
> [ 1.140277] usb usb6: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.140279] usb usb6: SerialNumber: 0000:00:1d.1
> [ 1.140380] hub 6-0:1.0: USB hub found
> [ 1.140384] hub 6-0:1.0: 2 ports detected
> [ 1.140447] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 1.140453] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 1.140456] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 1.140509] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
> [ 1.140529] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009400
> [ 1.140554] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.140556] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.140558] usb usb7: Product: UHCI Host Controller
> [ 1.140560] usb usb7: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.140562] usb usb7: SerialNumber: 0000:00:1d.2
> [ 1.140661] hub 7-0:1.0: USB hub found
> [ 1.140664] hub 7-0:1.0: 2 ports detected
> [ 1.140728] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
> [ 1.140734] uhci_hcd 0000:00:1d.3: setting latency timer to 64
> [ 1.140737] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 1.140788] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
> [ 1.140808] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00009080
> [ 1.140833] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.140835] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.140837] usb usb8: Product: UHCI Host Controller
> [ 1.140839] usb usb8: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.140841] usb usb8: SerialNumber: 0000:00:1d.3
> [ 1.140940] hub 8-0:1.0: USB hub found
> [ 1.140943] hub 8-0:1.0: 2 ports detected
> [ 1.141062] usbcore: registered new interface driver usbserial
> [ 1.141070] USB Serial support registered for generic
> [ 1.141083] usbcore: registered new interface driver usbserial_generic
> [ 1.141085] usbserial: USB Serial Driver core
> [ 1.141144] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> [ 1.143637] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.143645] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.143751] mousedev: PS/2 mouse device common for all mice
> [ 1.143950] rtc_cmos 00:03: RTC can wake from S4
> [ 1.144078] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> [ 1.144099] rtc0: alarms up to one month, y3k, 114 bytes nvram
> [ 1.144161] device-mapper: uevent: version 1.0.3
> [ 1.144236] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
> [ 1.144281] cpuidle: using governor ladder
> [ 1.144282] cpuidle: using governor menu
> [ 1.144415] EFI Variables Facility v0.08 2004-May-17
> [ 1.144571] usbcore: registered new interface driver usbhid
> [ 1.144572] usbhid: USB HID core driver
> [ 1.144620] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 1.144632] TCP cubic registered
> [ 1.144633] Initializing XFRM netlink socket
> [ 1.144751] NET: Registered protocol family 10
> [ 1.144865] Mobile IPv6
> [ 1.144867] NET: Registered protocol family 17
> [ 1.144881] Registering the dns_resolver key type
> [ 1.144896] Using IPI No-Shortcut mode
> [ 1.144998] PM: Hibernation image not present or could not be loaded.
> [ 1.145019] registered taskstats version 1
> [ 1.150403] Magic number: 4:464:92
> [ 1.150483] rtc_cmos 00:03: setting system clock to 2012-03-26 19:04:41 UTC (1332788681)
> [ 1.151350] Initializing network drop monitor service
> [ 1.162401] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
> [ 1.426760] ata3: SATA link down (SStatus 0 SControl 300)
> [ 1.516915] input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
> [ 1.566064] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.566167] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.577063] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.581172] ata4.00: ATA-7: Maxtor 7V250F0, VA111630, max UDMA/133
> [ 1.581175] ata4.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 1.582025] usb 4-1: new low-speed USB device number 2 using uhci_hcd
> [ 1.588394] ata4.00: configured for UDMA/133
> [ 1.609231] ata1.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
> [ 1.609235] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 1.614032] ata2.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
> [ 1.614037] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 1.662025] Refined TSC clocksource calibration: 2402.378 MHz.
> [ 1.662030] Switching to clocksource tsc
> [ 1.684197] ata1.00: configured for UDMA/133
> [ 1.684353] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> [ 1.684564] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.684646] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> [ 1.684744] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.684748] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.684786] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.688994] ata2.00: configured for UDMA/133
> [ 1.700155] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> [ 1.700331] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> [ 1.700361] sd 1:0:0:0: Attached scsi generic sg1 type 0
> [ 1.700425] sd 1:0:0:0: [sdb] Write Protect is off
> [ 1.700430] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 1.700466] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.700545] scsi 3:0:0:0: Direct-Access ATA Maxtor 7V250F0 VA11 PQ: 0 ANSI: 5
> [ 1.700723] sd 3:0:0:0: [sdc] 490234752 512-byte logical blocks: (251 GB/233 GiB)
> [ 1.700788] sd 3:0:0:0: Attached scsi generic sg2 type 0
> [ 1.700821] sd 3:0:0:0: [sdc] Write Protect is off
> [ 1.700825] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> [ 1.700857] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.723901] sda: sda1 sda2 sda3
> [ 1.724349] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.727281] sdc: sdc1
> [ 1.727584] sd 3:0:0:0: [sdc] Attached SCSI disk
> [ 1.728689] sdb: sdb1 sdb2 sdb3
> [ 1.729140] sd 1:0:0:0: [sdb] Attached SCSI disk
> [ 1.729227] Freeing unused kernel memory: 644k freed
> [ 1.729453] Write protecting the kernel text: 5408k
> [ 1.729508] Write protecting the kernel read-only data: 2096k
> [ 1.729512] NX-protecting the kernel data: 4832k
> [ 1.769680] usb 4-1: New USB device found, idVendor=051d, idProduct=0002
> [ 1.769685] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
> [ 1.769688] usb 4-1: Product: APC ES 725 FW:821.y2 .A USB FW:y2
> [ 1.769691] usb 4-1: Manufacturer: APC
> [ 1.769694] usb 4-1: SerialNumber: 3B0628X18842
> [ 1.866691] dracut: dracut-013-20.fc16
> [ 1.891672] udevd[123]: starting version 173
> [ 1.969644] dracut: Starting plymouth daemon
> [ 2.062877] sata_sil24 0000:03:00.0: version 1.1
> [ 2.062903] sata_sil24 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 2.062960] sata_sil24 0000:03:00.0: setting latency timer to 64
> [ 2.063039] pata_marvell 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 2.063072] pata_marvell 0000:05:00.0: setting latency timer to 64
> [ 2.064056] scsi5 : pata_marvell
> [ 2.064097] scsi4 : sata_sil24
> [ 2.064155] scsi6 : pata_marvell
> [ 2.064237] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
> [ 2.064240] ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
> [ 2.065350] scsi7 : sata_sil24
> [ 2.065434] ata7: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8f8000 irq 17
> [ 2.065438] ata8: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8fa000 irq 17
> [ 2.065482] sata_sil24 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 2.065537] sata_sil24 0000:04:00.0: setting latency timer to 64
> [ 2.066342] scsi8 : sata_sil24
> [ 2.069138] scsi9 : sata_sil24
> [ 2.069205] ata9: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9f8000 irq 18
> [ 2.069210] ata10: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9fa000 irq 18
> [ 2.218490] ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.03, max UDMA/66
> [ 2.224448] ata5.00: configured for UDMA/66
> [ 2.227062] scsi 5:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.03 PQ: 0 ANSI: 5
> [ 2.229737] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 2.229740] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 2.229887] sr 5:0:0:0: Attached scsi CD-ROM sr0
> [ 2.230037] sr 5:0:0:0: Attached scsi generic sg3 type 5
> [ 2.240105] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.240109] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.240196] mdadm: sending ioctl 1261 to a partition!
> [ 2.240198] mdadm: sending ioctl 1261 to a partition!
> [ 2.243796] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC APC ES 725 FW:821.y2 .A USB FW:y2 ] on usb-0000:00:1a.1-1/input0
> [ 2.260889] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.260892] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.260976] mdadm: sending ioctl 1261 to a partition!
> [ 2.260978] mdadm: sending ioctl 1261 to a partition!
> [ 2.269999] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.270020] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.294168] md: bind<sdb1>
> [ 2.309289] md: bind<sdb2>
> [ 2.311936] md: bind<sdb3>
> [ 2.333658] md: bind<sda1>
> [ 2.335596] md: raid1 personality registered for level 1
> [ 4.085035] ata7: SATA link down (SStatus 0 SControl 0)
> [ 4.201038] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 4.201371] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 4.204304] ata9.00: hard resetting link
> [ 4.542250] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 4.542289] ata9.01: hard resetting link
> [ 4.968018] ata9.01: softreset failed (SRST command error)
> [ 4.968036] ata9.01: failed to read SCR 0 (Emask=0x40)
> [ 4.968039] ata9.01: reset failed (errno=-85), retrying in 10 secs
> [ 6.105031] ata8: SATA link down (SStatus 0 SControl 0)
> [ 14.542045] ata9.01: reset failed, giving up
> [ 14.542050] ata9.15: hard resetting link
> [ 14.542053] ata9: controller in dubious state, performing PORT_RST
> [ 16.696039] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 16.696373] ata9.00: hard resetting link
> [ 17.034255] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 17.034291] ata9.01: hard resetting link
> [ 17.372252] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 17.372288] ata9.02: hard resetting link
> [ 17.798016] ata9.02: softreset failed (SRST command error)
> [ 17.908018] ata9.02: failed to read SCR 0 (Emask=0x1)
> [ 17.908022] ata9.02: reset failed (errno=-85), retrying in 10 secs
> [ 27.372093] ata9.02: reset failed, giving up
> [ 27.372097] ata9.15: hard resetting link
> [ 27.372100] ata9: controller in dubious state, performing PORT_RST
> [ 29.526040] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 29.526371] ata9.00: hard resetting link
> [ 29.864252] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 29.864289] ata9.01: hard resetting link
> [ 30.202250] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 30.202287] ata9.02: hard resetting link
> [ 30.540251] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 30.540289] ata9.03: hard resetting link
> [ 30.966013] ata9.03: softreset failed (SRST command error)
> [ 31.076018] ata9.03: failed to read SCR 0 (Emask=0x1)
> [ 31.076022] ata9.03: reset failed (errno=-85), retrying in 10 secs
> [ 40.540022] ata9.03: reset failed, giving up
> [ 40.540027] ata9.15: hard resetting link
> [ 40.540029] ata9: controller in dubious state, performing PORT_RST
> [ 42.694040] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 42.694389] ata9.00: hard resetting link
> [ 43.032252] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 43.032287] ata9.01: hard resetting link
> [ 43.370251] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 43.370286] ata9.02: hard resetting link
> [ 43.708250] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 43.708286] ata9.03: hard resetting link
> [ 44.046253] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 44.046289] ata9.04: hard resetting link
> [ 44.351390] ata9.04: SATA link down (SStatus 0 SControl 320)
> [ 44.351457] ata9.05: hard resetting link
> [ 44.656361] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 44.685158] ata9.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 44.685163] ata9.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [ 44.727185] ata9.00: configured for UDMA/100
> [ 44.755818] ata9.01: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 44.755822] ata9.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 44.797689] ata9.01: configured for UDMA/100
> [ 44.826404] ata9.02: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 44.826409] ata9.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 44.868366] ata9.02: configured for UDMA/100
> [ 44.897084] ata9.03: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 44.897089] ata9.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 44.939073] ata9.03: configured for UDMA/100
> [ 44.939152] ata9: EH complete
> [ 44.939284] scsi 8:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 44.939460] sd 8:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 44.939520] sd 8:0:0:0: Attached scsi generic sg4 type 0
> [ 44.939531] sd 8:0:0:0: [sdd] Write Protect is off
> [ 44.939535] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> [ 44.939566] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 44.939691] scsi 8:1:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 44.939917] sd 8:1:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 44.939957] sd 8:1:0:0: Attached scsi generic sg5 type 0
> [ 44.939993] sd 8:1:0:0: [sde] Write Protect is off
> [ 44.939997] sd 8:1:0:0: [sde] Mode Sense: 00 3a 00 00
> [ 44.940049] sd 8:1:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 44.940143] scsi 8:2:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 44.940342] sd 8:2:0:0: [sdf] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 44.940426] sd 8:2:0:0: Attached scsi generic sg6 type 0
> [ 44.940432] sd 8:2:0:0: [sdf] Write Protect is off
> [ 44.940436] sd 8:2:0:0: [sdf] Mode Sense: 00 3a 00 00
> [ 44.940479] sd 8:2:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 44.940601] scsi 8:3:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 44.940788] sd 8:3:0:0: [sdg] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 44.940843] sd 8:3:0:0: Attached scsi generic sg7 type 0
> [ 44.940865] sd 8:3:0:0: [sdg] Write Protect is off
> [ 44.940869] sd 8:3:0:0: [sdg] Mode Sense: 00 3a 00 00
> [ 44.940899] sd 8:3:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 44.948903] sdd: unknown partition table
> [ 44.949128] sd 8:0:0:0: [sdd] Attached SCSI disk
> [ 44.971385] sdg: unknown partition table
> [ 44.971540] sd 8:3:0:0: [sdg] Attached SCSI disk
> [ 44.971596] sde: unknown partition table
> [ 44.971630] sdf: unknown partition table
> [ 44.971840] sd 8:2:0:0: [sdf] Attached SCSI disk
> [ 44.971894] sd 8:1:0:0: [sde] Attached SCSI disk
> [ 47.072046] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 47.072428] ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 47.075710] ata10.00: hard resetting link
> [ 47.479256] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 47.479296] ata10.01: hard resetting link
> [ 47.905017] ata10.01: softreset failed (SRST command error)
> [ 47.905035] ata10.01: failed to read SCR 0 (Emask=0x40)
> [ 47.905039] ata10.01: reset failed (errno=-85), retrying in 10 secs
> [ 57.479018] ata10.01: reset failed, giving up
> [ 57.479023] ata10.15: hard resetting link
> [ 57.479026] ata10: controller in dubious state, performing PORT_RST
> [ 59.633039] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 59.633480] ata10.00: hard resetting link
> [ 60.037260] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 60.037296] ata10.01: hard resetting link
> [ 60.441258] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 60.441293] ata10.02: hard resetting link
> [ 60.867016] ata10.02: softreset failed (SRST command error)
> [ 60.977018] ata10.02: failed to read SCR 0 (Emask=0x1)
> [ 60.977022] ata10.02: reset failed (errno=-85), retrying in 10 secs
> [ 70.441017] ata10.02: reset failed, giving up
> [ 70.441023] ata10.15: hard resetting link
> [ 70.441026] ata10: controller in dubious state, performing PORT_RST
> [ 72.595047] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 72.595436] ata10.00: hard resetting link
> [ 72.999257] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 72.999295] ata10.01: hard resetting link
> [ 73.403258] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 73.403296] ata10.02: hard resetting link
> [ 73.807256] ata10.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 73.807293] ata10.03: hard resetting link
> [ 74.233017] ata10.03: softreset failed (SRST command error)
> [ 74.343014] ata10.03: failed to read SCR 0 (Emask=0x1)
> [ 74.343018] ata10.03: reset failed (errno=-85), retrying in 10 secs
> [ 83.807022] ata10.03: reset failed, giving up
> [ 83.807027] ata10.15: hard resetting link
> [ 83.807030] ata10: controller in dubious state, performing PORT_RST
> [ 85.961042] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 85.961498] ata10.00: hard resetting link
> [ 86.365267] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 86.365303] ata10.01: hard resetting link
> [ 86.769251] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 86.769288] ata10.02: hard resetting link
> [ 87.173252] ata10.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 87.173287] ata10.03: hard resetting link
> [ 87.577251] ata10.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 87.577286] ata10.04: hard resetting link
> [ 87.882390] ata10.04: SATA link down (SStatus 0 SControl 320)
> [ 87.882457] ata10.05: hard resetting link
> [ 88.187364] ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 88.188237] ata10.00: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 88.188241] ata10.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [ 88.189269] ata10.00: configured for UDMA/100
> [ 88.210802] ata10.01: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 88.210807] ata10.01: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 88.211684] ata10.01: configured for UDMA/100
> [ 88.231774] ata10.02: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 88.231779] ata10.02: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 88.232656] ata10.02: configured for UDMA/100
> [ 88.242663] ata10.03: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 88.242668] ata10.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 88.243540] ata10.03: configured for UDMA/100
> [ 88.243611] ata10: EH complete
> [ 88.243743] scsi 9:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 88.243940] sd 9:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 88.243985] sd 9:0:0:0: Attached scsi generic sg8 type 0
> [ 88.244033] sd 9:0:0:0: [sdh] Write Protect is off
> [ 88.244037] sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00
> [ 88.244071] sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 88.244166] scsi 9:1:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 88.244348] sd 9:1:0:0: [sdi] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 88.244429] sd 9:1:0:0: Attached scsi generic sg9 type 0
> [ 88.244435] sd 9:1:0:0: [sdi] Write Protect is off
> [ 88.244440] sd 9:1:0:0: [sdi] Mode Sense: 00 3a 00 00
> [ 88.244471] sd 9:1:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 88.244619] scsi 9:2:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 88.244876] sd 9:2:0:0: [sdj] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 88.244926] sd 9:2:0:0: Attached scsi generic sg10 type 0
> [ 88.244942] sd 9:2:0:0: [sdj] Write Protect is off
> [ 88.244946] sd 9:2:0:0: [sdj] Mode Sense: 00 3a 00 00
> [ 88.244976] sd 9:2:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 88.245109] scsi 9:3:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 88.245299] sd 9:3:0:0: [sdk] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 88.245347] sd 9:3:0:0: Attached scsi generic sg11 type 0
> [ 88.245388] sd 9:3:0:0: [sdk] Write Protect is off
> [ 88.245392] sd 9:3:0:0: [sdk] Mode Sense: 00 3a 00 00
> [ 88.245422] sd 9:3:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 88.253550] sdh: unknown partition table
> [ 88.253774] sd 9:0:0:0: [sdh] Attached SCSI disk
> [ 88.278785] sdi: unknown partition table
> [ 88.278793] sdj: unknown partition table
> [ 88.278994] sd 9:1:0:0: [sdi] Attached SCSI disk
> [ 88.279011] sd 9:2:0:0: [sdj] Attached SCSI disk
> [ 88.279047] sdk: unknown partition table
> [ 88.279188] sd 9:3:0:0: [sdk] Attached SCSI disk
> [ 88.279481] bio: create slab <bio-1> at 1
> [ 88.279749] md/raid1:md0: active with 2 out of 2 mirrors
> [ 88.279779] md0: detected capacity change from 0 to 314507264
> [ 88.298379] md0:
> [ 88.299814] scsi_verify_blk_ioctl: 126 callbacks suppressed
> [ 88.299816] mdadm: sending ioctl 1261 to a partition!
> [ 88.299818] mdadm: sending ioctl 1261 to a partition!
> [ 88.314219] md: bind<sdd>
> [ 88.358298] mdadm: sending ioctl 1261 to a partition!
> [ 88.358302] mdadm: sending ioctl 1261 to a partition!
> [ 88.364485] md: bind<sdg>
> [ 88.368526] md: bind<sde>
> [ 88.372132] md: bind<sdf>
> [ 88.375045] async_tx: api initialized (async)
> [ 88.375392] xor: automatically using best checksumming function: pIII_sse
> [ 88.380003] pIII_sse : 8512.000 MB/sec
> [ 88.380006] xor: using function: pIII_sse (8512.000 MB/sec)
> [ 88.385342] mdadm: sending ioctl 1261 to a partition!
> [ 88.385345] mdadm: sending ioctl 1261 to a partition!
> [ 88.397062] raid6: int32x1 902 MB/s
> [ 88.414047] raid6: int32x2 714 MB/s
> [ 88.431056] raid6: int32x4 628 MB/s
> [ 88.448080] raid6: int32x8 710 MB/s
> [ 88.465008] raid6: mmxx1 2808 MB/s
> [ 88.482020] raid6: mmxx2 3097 MB/s
> [ 88.499006] raid6: sse1x1 1847 MB/s
> [ 88.516015] raid6: sse1x2 2453 MB/s
> [ 88.533010] raid6: sse2x1 3453 MB/s
> [ 88.550004] raid6: sse2x2 4429 MB/s
> [ 88.550006] raid6: using algorithm sse2x2 (4429 MB/s)
> [ 88.550830] md: raid6 personality registered for level 6
> [ 88.550832] md: raid5 personality registered for level 5
> [ 88.550834] md: raid4 personality registered for level 4
> [ 88.550967] md/raid:md6: device sdf operational as raid disk 2
> [ 88.550969] md/raid:md6: device sde operational as raid disk 1
> [ 88.550971] md/raid:md6: device sdg operational as raid disk 3
> [ 88.550972] md/raid:md6: device sdd operational as raid disk 0
> [ 88.551326] md/raid:md6: allocated 4216kB
> [ 88.551359] md/raid:md6: raid level 5 active with 4 out of 4 devices, algorithm 2
> [ 88.551360] RAID conf printout:
> [ 88.551362] --- level:5 rd:4 wd:4
> [ 88.551363] disk 0, o:1, dev:sdd
> [ 88.551365] disk 1, o:1, dev:sde
> [ 88.551366] disk 2, o:1, dev:sdf
> [ 88.551368] disk 3, o:1, dev:sdg
> [ 88.551395] md6: detected capacity change from 0 to 4500897595392
> [ 88.553042] md6: unknown partition table
> [ 88.553991] md: bind<sdi>
> [ 88.557237] md: bind<sdh>
> [ 88.560872] md: bind<sdk>
> [ 88.564958] md: bind<sdj>
> [ 88.567708] md/raid:md7: device sdj operational as raid disk 2
> [ 88.567712] md/raid:md7: device sdk operational as raid disk 3
> [ 88.567715] md/raid:md7: device sdh operational as raid disk 1
> [ 88.567718] md/raid:md7: device sdi operational as raid disk 0
> [ 88.568182] md/raid:md7: allocated 4216kB
> [ 88.568216] md/raid:md7: raid level 5 active with 4 out of 4 devices, algorithm 2
> [ 88.568218] RAID conf printout:
> [ 88.568221] --- level:5 rd:4 wd:4
> [ 88.568223] disk 0, o:1, dev:sdi
> [ 88.568226] disk 1, o:1, dev:sdh
> [ 88.568228] disk 2, o:1, dev:sdj
> [ 88.568230] disk 3, o:1, dev:sdk
> [ 88.568263] md7: detected capacity change from 0 to 1500315451392
> [ 88.569634] md7: unknown partition table
> [ 88.593009] mdadm: sending ioctl 1261 to a partition!
> [ 88.593012] mdadm: sending ioctl 1261 to a partition!
> [ 100.905944] md/raid1:md1: active with 1 out of 2 mirrors
> [ 100.905973] md1: detected capacity change from 0 to 311163576320
> [ 100.908115] dracut: mdadm: started /dev/md1
> [ 100.912649] md1: unknown partition table
> [ 100.915000] mdadm: sending ioctl 1261 to a partition!
> [ 100.915014] mdadm: sending ioctl 1261 to a partition!
> [ 100.922165] md/raid1:md2: active with 1 out of 2 mirrors
> [ 100.922198] md2: detected capacity change from 0 to 8589869056
> [ 100.924335] dracut: mdadm: started /dev/md2
> [ 100.945689] md2: unknown partition table
> [ 100.947251] mdadm: sending ioctl 1261 to a partition!
> [ 100.947254] mdadm: sending ioctl 1261 to a partition!
> [ 101.059473] mdadm: sending ioctl 1261 to a partition!
> [ 101.059476] mdadm: sending ioctl 1261 to a partition!
> [ 101.116097] mdadm: sending ioctl 1261 to a partition!
> [ 101.116101] mdadm: sending ioctl 1261 to a partition!
> [ 101.295531] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
> [ 101.409863] dracut: Checking ext4: /dev/disk/by-uuid/773cb4b3-4bb0-4705-b494-08cb9c2b5d73
> [ 101.409938] dracut: issuing e2fsck -a /dev/disk/by-uuid/773cb4b3-4bb0-4705-b494-08cb9c2b5d73
> [ 101.513095] dracut: /dev/disk/by-uuid/773cb4b3-4bb0-4705-b494-08cb9c2b5d73: clean, 325251/18997248 files, 4803664/75967670 blocks
> [ 101.513374] dracut: Remounting /dev/disk/by-uuid/773cb4b3-4bb0-4705-b494-08cb9c2b5d73 with -o ro
> [ 101.515482] mdadm: sending ioctl 1261 to a partition!
> [ 101.515485] mdadm: sending ioctl 1261 to a partition!
> [ 101.628453] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
> [ 101.648720] dracut: Mounted root filesystem /dev/md1
> [ 101.898107] dracut: Switching root
> [ 102.366666] SELinux: Disabled at runtime.
> [ 102.366691] SELinux: Unregistering netfilter hooks
> [ 102.369100] type=1404 audit(1332788782.717:2): selinux=0 auid=4294967295 ses=4294967295
> [ 102.427531] systemd[1]: RTC configured in localtime, applying delta of 540 minutes to system time.
> [ 102.496195] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
> [ 102.520096] systemd[1]: Set hostname to <server3>.
> [ 104.012246] EXT4-fs (md1): re-mounted. Opts: (null)
> [ 104.582180] RPC: Registered named UNIX socket transport module.
> [ 104.582182] RPC: Registered udp transport module.
> [ 104.582184] RPC: Registered tcp transport module.
> [ 104.582185] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 104.720818] udevd[797]: starting version 173
> [ 104.841392] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [ 105.677974] iTCO_vendor_support: vendor-support=0
> [ 105.878333] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
> [ 105.878413] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
> [ 105.878477] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 105.896657] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0x0
> [ 105.987632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 105.987656] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 105.987682] r8169 0000:06:00.0: setting latency timer to 64
> [ 105.987750] r8169 0000:06:00.0: irq 46 for MSI/MSI-X
> [ 105.987895] r8169 0000:06:00.0: eth0: RTL8168b/8111b at 0xf7e3c000, 00:1d:92:70:a3:96, XID 18000000 IRQ 46
> [ 105.987898] r8169 0000:06:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
> [ 106.102002] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
> [ 106.107091] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0x0
> [ 106.109515] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
> [ 106.114164] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0x0
> [ 106.116003] microcode: CPU2 updated to revision 0xba, date = 2010-10-03
> [ 106.121407] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0x0
> [ 106.123880] microcode: CPU3 updated to revision 0xba, date = 2010-10-03
> [ 106.128492] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 106.136321] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 106.377968] parport_pc 00:07: reported by Plug and Play ACPI
> [ 106.378026] parport0: PC-style at 0x378, irq 7 [PCSPP]
> [ 106.413605] mtp-probe[971]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1"
> [ 106.529978] ppdev: user-space parallel port driver
> [ 106.535851] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 106.535895] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
> [ 106.535921] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
> [ 106.593022] hda_codec: ALC888: BIOS auto-probing.
> [ 106.593027] ALSA sound/pci/hda/patch_realtek.c:1275 SKU: Nid=0x1d sku_cfg=0x4007f603
> [ 106.593029] ALSA sound/pci/hda/patch_realtek.c:1277 SKU: port_connectivity=0x1
> [ 106.593031] ALSA sound/pci/hda/patch_realtek.c:1278 SKU: enable_pcbeep=0x0
> [ 106.593034] ALSA sound/pci/hda/patch_realtek.c:1279 SKU: check_sum=0x00000007
> [ 106.593036] ALSA sound/pci/hda/patch_realtek.c:1280 SKU: customization=0x000000f6
> [ 106.593038] ALSA sound/pci/hda/patch_realtek.c:1281 SKU: external_amp=0x0
> [ 106.593040] ALSA sound/pci/hda/patch_realtek.c:1282 SKU: platform_type=0x0
> [ 106.593042] ALSA sound/pci/hda/patch_realtek.c:1283 SKU: swap=0x1
> [ 106.593043] ALSA sound/pci/hda/patch_realtek.c:1284 SKU: override=0x1
> [ 106.593049] ALSA sound/pci/hda/hda_codec.c:4955 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
> [ 106.593051] ALSA sound/pci/hda/hda_codec.c:4959 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 106.593054] ALSA sound/pci/hda/hda_codec.c:4963 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> [ 106.593056] ALSA sound/pci/hda/hda_codec.c:4964 mono: mono_out=0x0
> [ 106.593058] ALSA sound/pci/hda/hda_codec.c:4967 dig-out=0x1e/0x0
> [ 106.593060] ALSA sound/pci/hda/hda_codec.c:4968 inputs:
> [ 106.593062] ALSA sound/pci/hda/hda_codec.c:4972 Rear Mic=0x18
> [ 106.593065] ALSA sound/pci/hda/hda_codec.c:4972 Front Mic=0x19
> [ 106.593067] ALSA sound/pci/hda/hda_codec.c:4972 Line=0x1a
> [ 106.593069] ALSA sound/pci/hda/hda_codec.c:4974
> [ 106.595394] ALSA sound/pci/hda/patch_realtek.c:1338 realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
> [ 106.595397] ALSA sound/pci/hda/patch_realtek.c:1354 realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0888
> [ 106.606845] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
> [ 106.635154] mtp-probe[971]: bus: 4, device: 2 was not an MTP device
> [ 106.903881] scsi_verify_blk_ioctl: 2 callbacks suppressed
> [ 106.903884] mdadm: sending ioctl 1261 to a partition!
> [ 106.903886] mdadm: sending ioctl 1261 to a partition!
> [ 106.904814] mdadm: sending ioctl 1261 to a partition!
> [ 106.904816] mdadm: sending ioctl 1261 to a partition!
> [ 106.905233] mdadm: sending ioctl 1261 to a partition!
> [ 106.905236] mdadm: sending ioctl 1261 to a partition!
> [ 107.192862] mdadm: sending ioctl 800c0910 to a partition!
> [ 107.192865] mdadm: sending ioctl 800c0910 to a partition!
> [ 107.192871] mdadm: sending ioctl 1261 to a partition!
> [ 107.192873] mdadm: sending ioctl 1261 to a partition!
> [ 107.575565] nvidia: module license 'NVIDIA' taints kernel.
> [ 107.575568] Disabling lock debugging due to kernel taint
> [ 107.878753] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 107.878765] nvidia 0000:01:00.0: setting latency timer to 64
> [ 107.878770] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
> [ 107.878950] NVRM: loading NVIDIA UNIX x86 Kernel Module 290.10 Wed Nov 16 19:27:25 PST 2011
> [ 107.981636] Adding 8388540k swap on /dev/md2. Priority:0 extents:1 across:8388540k
> [ 108.641751] systemd-fsck[1208]: /dev/md0: clean, 263/76304 files, 154648/307136 blocks
> [ 108.683700] systemd-fsck[1158]: RAID5_0: clean, 1971/274718720 files, 825477773/1098851952 blocks
> [ 108.850706] systemd-fsck[1191]: /dev/sdc1: clean, 103/15327232 files, 25440488/61277926 blocks (check in 3 mounts)
> [ 108.868638] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem
> [ 108.878625] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
> [ 108.949111] systemd-fsck[1162]: EXCHANGE: clean, 151350/183156736 files, 228850362/366287952 blocks
> [ 108.982476] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
> [ 109.157712] EXT4-fs (md7): mounted filesystem with ordered data mode. Opts: (null)
> [ 109.278467] EXT4-fs (md6): mounted filesystem with ordered data mode. Opts: (null)
> [ 109.826668] fedora-storage-init[1224]: \xffffffe8\xffffffab\xffffff96\xffffffab\xffffff96\xffffffe7\xffffff90\xffffff86\xffffff90\xffffff86\xffffffe3\xffffff83\xffffff9c\xffffff83\xffffff9c\xffffffe3\xffffff83\xffffffaa\xffffff83\xffffffaa\xffffffe3\xffffff83\xffffffa5\xffffff83\xffffffa5\xffffffe3\xffffff83\xffffffbc\xffffff83\xffffffbc\xffffffe3\xffffff83\xffffffa0\xffffff83\xffffffa0\xffffffe7\xffffffae\xffffffa1\xffffffae\xffffffa1\xffffffe7\xffffff90\xffffff86\xffffff90\xffffff86\xffffffe3\xffffff82\xffffff92\xffffff82\xffffff92\xffffffe8\xffffffa8\xffffffad\xffffffa8\xffffffad\xffffffe5\xffffffae\xffffff9a\xffffffae\xffffff9a\xffffffe4\xffffffb8\xffffffad\xffffffb8\xffffffad: No volume groups found
> [ 109.827119] fedora-storage-init[1224]: [ OK ]
> [ 110.047199] fedora-storage-init[1267]: \xffffffe8\xffffffab\xffffff96\xffffffab\xffffff96\xffffffe7\xffffff90\xffffff86\xffffff90\xffffff86\xffffffe3\xffffff83\xffffff9c\xffffff83\xffffff9c\xffffffe3\xffffff83\xffffffaa\xffffff83\xffffffaa\xffffffe3\xffffff83\xffffffa5\xffffff83\xffffffa5\xffffffe3\xffffff83\xffffffbc\xffffff83\xffffffbc\xffffffe3\xffffff83\xffffffa0\xffffff83\xffffffa0\xffffffe7\xffffffae\xffffffa1\xffffffae\xffffffa1\xffffffe7\xffffff90\xffffff86\xffffff90\xffffff86\xffffffe3\xffffff82\xffffff92\xffffff82\xffffff92\xffffffe8\xffffffa8\xffffffad\xffffffa8\xffffffad\xffffffe5\xffffffae\xffffff9a\xffffffae\xffffff9a\xffffffe4\xffffffb8\xffffffad\xffffffb8\xffffffad: No volume groups found
> [ 110.047820] fedora-storage-init[1267]: [ OK ]
> [ 110.246400] lvm[1274]: No volume groups found
> [ 112.320113] ntpd[1320]: ntpd 4.2.6p4@1.2324-o Thu Oct 6 15:37:56 UTC 2011 (1)
> [ 112.344874] ntpd[1320]: proto: precision = 0.393 usec
> [ 112.344880] ntpd[1320]: 0.0.0.0 c01d 0d kern kernel time sync enabled
> [ 113.173142] systemd[1]: nscd.service: Supervising process 1378 which is not our child. We'll most likely not notice when it exits.
> [ 117.556889] r8169 0000:06:00.0: eth0: link down
> [ 117.556895] r8169 0000:06:00.0: eth0: link down
> [ 117.557053] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 119.924279] r8169 0000:06:00.0: eth0: link up
> [ 119.924424] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 123.802802] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [ 123.821298] NFSD: starting 90-second grace period
> [ 147.021977] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
> [ 162.662480] fuse init (API version 7.17)
> [ 164.794923] Bluetooth: Core ver 2.16
> [ 164.794947] NET: Registered protocol family 31
> [ 164.794949] Bluetooth: HCI device and connection manager initialized
> [ 164.794951] Bluetooth: HCI socket layer initialized
> [ 164.794953] Bluetooth: L2CAP socket layer initialized
> [ 164.794957] Bluetooth: SCO socket layer initialized
> [ 164.834501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 164.834504] Bluetooth: BNEP filters: protocol multicast
> [ 169.671853] FS-Cache: Loaded
> [ 169.696998] FS-Cache: Netfs 'nfs' registered for caching
------
WARNING: multiple messages have this Message-ID (diff)
From: "ANEZAKI, Akira" <fireblade1230@yahoo.co.jp>
To: Gwendal Grignou <gwendal@google.com>
Cc: IDE/ATA development list <linux-ide@vger.kernel.org>,
Mark Lord <kernel@teksavvy.com>,
Linux Kernel <linux-kernel@vger.kernel.org>,
Jeff Garzik <jgarzik@pobox.com>
Subject: Re: Fwd: libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726
Date: Wed, 28 Mar 2012 14:22:47 +0900 [thread overview]
Message-ID: <4F72A027.7040907@yahoo.co.jp> (raw)
In-Reply-To: <CAMHSBOWOLj0igQYK16qQ+BznzmS2KV89dw4ahRz0h5tUw+YOdQ@mail.gmail.com>
Hello Gwendal,
(2012/03/27 20:17), Gwendal Grignou wrote:
> Regarding the machine with 10 disks, I see that all the drives have
> been found; I don't see any other error from the /var/log/messages
> snippet that could explain md not finding the volumes.
I have attached 11 disks log. (I'm sorry for my mistake!) RAID1 is
assembled only with 1 partition. The RAID1s are md1 and md2.
Best Regards,
Akira
--- 3.2.10 2pmp power cycle error on raid ---
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 3.2.10-3.fc16.i686.PAE (mockbuild@x86-02.phx2.fedoraproject.org) (gcc version 4.6.2 20111027 (Red Hat 4.6.2-1) (GCC) ) #1 SMP Thu Mar 15 20:37:01 UTC 2012
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009b800 (usable)
> [ 0.000000] BIOS-e820: 000000000009b800 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffb0000 (usable)
> [ 0.000000] BIOS-e820: 00000000bffb0000 - 00000000bffbe000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000bffbe000 - 00000000bfff0000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] DMI present.
> [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7360/MS-7360, BIOS V1.AB2 05/28/2007
> [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
> [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
> [ 0.000000] last_pfn = 0xbffb0 max_arch_pfn = 0x1000000
> [ 0.000000] MTRR default type: uncachable
> [ 0.000000] MTRR fixed ranges enabled:
> [ 0.000000] 00000-9FFFF write-back
> [ 0.000000] A0000-BFFFF uncachable
> [ 0.000000] C0000-CFFFF write-protect
> [ 0.000000] D0000-DFFFF uncachable
> [ 0.000000] E0000-EFFFF write-through
> [ 0.000000] F0000-FFFFF write-protect
> [ 0.000000] MTRR variable ranges enabled:
> [ 0.000000] 0 base 000000000 mask F80000000 write-back
> [ 0.000000] 1 base 080000000 mask FC0000000 write-back
> [ 0.000000] 2 disabled
> [ 0.000000] 3 disabled
> [ 0.000000] 4 disabled
> [ 0.000000] 5 disabled
> [ 0.000000] 6 disabled
> [ 0.000000] 7 disabled
> [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> [ 0.000000] found SMP MP-table at [c00ff780] ff780
> [ 0.000000] initial memory mapped : 0 - 01200000
> [ 0.000000] Base memory trampoline at [c0097000] 97000 size 16384
> [ 0.000000] init_memory_mapping: 0000000000000000-00000000375fe000
> [ 0.000000] 0000000000 - 0000200000 page 4k
> [ 0.000000] 0000200000 - 0037400000 page 2M
> [ 0.000000] 0037400000 - 00375fe000 page 4k
> [ 0.000000] kernel direct mapping tables up to 375fe000 @ 11f8000-1200000
> [ 0.000000] RAMDISK: 37081000 - 37ff0000
> [ 0.000000] Allocated new RAMDISK: 36112000 - 37080e5b
> [ 0.000000] Move RAMDISK from 0000000037081000 - 0000000037fefe5a to 36112000 - 37080e5a
> [ 0.000000] ACPI: RSDP 000f95c0 00014 (v00 ACPIAM)
> [ 0.000000] ACPI: RSDT bffb0000 00044 (v01 Mouse Computer 20070528 MSFT 00000097)
> [ 0.000000] ACPI: FACP bffb0200 00084 (v01 052807 FACP1414 20070528 MSFT 00000097)
> [ 0.000000] ACPI: DSDT bffb05c0 05564 (v01 0AAAA 0AAAA000 00000000 INTL 20051117)
> [ 0.000000] ACPI: FACS bffbe000 00040
> [ 0.000000] ACPI: APIC bffb0390 0006C (v01 052807 APIC1414 20070528 MSFT 00000097)
> [ 0.000000] ACPI: MCFG bffb0400 0003C (v01 052807 OEMMCFG 20070528 MSFT 00000097)
> [ 0.000000] ACPI: SLIC bffb0440 00176 (v01 Mouse Computer 20070528 MSFT 00000097)
> [ 0.000000] ACPI: SLIC bffb0440 00176 (v01 Mouse Computer 20070528 MSFT 00000097)
> [ 0.000000] ACPI: OEMB bffbe040 00071 (v01 052807 OEMB1414 20070528 MSFT 00000097)
> [ 0.000000] ACPI: GSCI bffbe0c0 02024 (v01 052807 GMCHSCI 20070528 MSFT 00000097)
> [ 0.000000] ACPI: SSDT bffc1330 0082F (v01 DpgPmm CpuPm 00000012 INTL 20051117)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] 2185MB HIGHMEM available.
> [ 0.000000] 885MB LOWMEM available.
> [ 0.000000] mapped low ram: 0 - 375fe000
> [ 0.000000] low ram: 0 - 375fe000
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0x00000010 -> 0x00001000
> [ 0.000000] Normal 0x00001000 -> 0x000375fe
> [ 0.000000] HighMem 0x000375fe -> 0x000bffb0
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[2] active PFN ranges
> [ 0.000000] 0: 0x00000010 -> 0x0000009b
> [ 0.000000] 0: 0x00000100 -> 0x000bffb0
> [ 0.000000] On node 0 totalpages: 786235
> [ 0.000000] free_area_init_node: node 0, pgdat c0bb3bc0, node_mem_map f4912200
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 3947 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1740 pages used for memmap
> [ 0.000000] Normal zone: 220978 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 4372 pages used for memmap
> [ 0.000000] HighMem zone: 555166 pages, LIFO batch:31
> [ 0.000000] Using APIC driver default
> [ 0.000000] ACPI: PM-Timer IO Port: 0x808
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
> [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
> [ 0.000000] nr_irqs_gsi: 40
> [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
> [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
> [ 0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
> [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000)
> [ 0.000000] Booting paravirtualized kernel on bare hardware
> [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
> [ 0.000000] PERCPU: Embedded 14 pages/cpu @f7200000 s34240 r0 d23104 u524288
> [ 0.000000] pcpu-alloc: s34240 r0 d23104 u524288 alloc=1*2097152
> [ 0.000000] pcpu-alloc: [0] 0 1 2 3
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780091
> [ 0.000000] Kernel command line: ro root=UUID=773cb4b3-4bb0-4705-b494-08cb9c2b5d73 LANG=ja_JP.UTF-8 KEYBOARDTYPE=pc KEYTABLE=jp106 rhgb quiet nomodeset
> [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
> [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.000000] Initializing CPU#0
> [ 0.000000] allocated 12581376 bytes of page_cgroup
> [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
> [ 0.000000] Initializing HighMem for node 0 (000375fe:000bffb0)
> [ 0.000000] Memory: 3081612k/3145408k available (5404k kernel code, 63328k reserved, 2569k data, 644k init, 2238152k highmem)
> [ 0.000000] virtual kernel memory layout:
> [ 0.000000] fixmap : 0xffa95000 - 0xfffff000 (5544 kB)
> [ 0.000000] pkmap : 0xff600000 - 0xff800000 (2048 kB)
> [ 0.000000] vmalloc : 0xf7dfe000 - 0xff5fe000 ( 120 MB)
> [ 0.000000] lowmem : 0xc0000000 - 0xf75fe000 ( 885 MB)
> [ 0.000000] .init : 0xc0bca000 - 0xc0c6b000 ( 644 kB)
> [ 0.000000] .data : 0xc094723f - 0xc0bc9980 (2569 kB)
> [ 0.000000] .text : 0xc0400000 - 0xc094723f (5404 kB)
> [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> [ 0.000000] Hierarchical RCU implementation.
> [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
> [ 0.000000] NR_IRQS:2304 nr_irqs:712 16
> [ 0.000000] CPU 0 irqstacks, hard=f380a000 soft=f380c000
> [ 0.000000] Console: colour VGA+ 80x25
> [ 0.000000] console [tty0] enabled
> [ 0.000000] Fast TSC calibration using PIT
> [ 0.000000] Detected 2402.216 MHz processor.
> [ 0.001001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4804.43 BogoMIPS (lpj=2402216)
> [ 0.001005] pid_max: default: 32768 minimum: 301
> [ 0.001024] Security Framework initialized
> [ 0.001032] SELinux: Initializing.
> [ 0.001039] SELinux: Starting in permissive mode
> [ 0.001086] Mount-cache hash table entries: 512
> [ 0.002117] Initializing cgroup subsys cpuacct
> [ 0.002122] Initializing cgroup subsys memory
> [ 0.002129] Initializing cgroup subsys devices
> [ 0.002131] Initializing cgroup subsys freezer
> [ 0.002133] Initializing cgroup subsys net_cls
> [ 0.002135] Initializing cgroup subsys blkio
> [ 0.002139] Initializing cgroup subsys perf_event
> [ 0.002162] CPU: Physical Processor ID: 0
> [ 0.002163] CPU: Processor Core ID: 0
> [ 0.002166] mce: CPU supports 6 MCE banks
> [ 0.002173] CPU0: Thermal monitoring enabled (TM2)
> [ 0.002175] using mwait in idle threads.
> [ 0.003140] ACPI: Core revision 20110623
> [ 0.006009] ftrace: allocating 22484 entries in 45 pages
> [ 0.007043] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.007393] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.018127] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b
> [ 0.018998] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
> [ 0.018998] PEBS disabled due to CPU errata.
> [ 0.018998] ... version: 2
> [ 0.018998] ... bit width: 40
> [ 0.018998] ... generic registers: 2
> [ 0.018998] ... value mask: 000000ffffffffff
> [ 0.018998] ... max period: 000000007fffffff
> [ 0.018998] ... fixed-purpose events: 3
> [ 0.018998] ... event mask: 0000000700000003
> [ 0.018998] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.018998] CPU 1 irqstacks, hard=f3902000 soft=f3904000
> [ 0.018998] Booting Node 0, Processors #1
> [ 0.018998] smpboot cpu 1: start_ip = 97000
> [ 0.001999] Initializing CPU#1
> [ 0.090019] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.090116] CPU 2 irqstacks, hard=f3930000 soft=f3932000
> [ 0.090118] #2
> [ 0.090119] smpboot cpu 2: start_ip = 97000
> [ 0.001999] Initializing CPU#2
> [ 0.162002] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.162084] CPU 3 irqstacks, hard=f393e000 soft=f3948000
> [ 0.162086] #3 Ok.
> [ 0.162088] smpboot cpu 3: start_ip = 97000
> [ 0.001999] Initializing CPU#3
> [ 0.233992] NMI watchdog enabled, takes one hw-pmu counter.
> [ 0.234017] Brought up 4 CPUs
> [ 0.234020] Total of 4 processors activated (19216.12 BogoMIPS).
> [ 0.235093] devtmpfs: initialized
> [ 0.235212] PM: Registering ACPI NVS region at bffbe000 (204800 bytes)
> [ 0.236839] atomic64 test passed for i586+ platform with CX8 and with SSE
> [ 0.236864] RTC time: 19:04:40, date: 03/26/12
> [ 0.236897] NET: Registered protocol family 16
> [ 0.237074] ACPI: bus type pci registered
> [ 0.237134] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.237137] PCI: not using MMCONFIG
> [ 0.237236] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
> [ 0.237293] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
> [ 0.237295] PCI: Using configuration type 1 for base access
> [ 0.238395] bio: create slab <bio-0> at 0
> [ 0.238395] ACPI: Added _OSI(Module Device)
> [ 0.238395] ACPI: Added _OSI(Processor Device)
> [ 0.238395] ACPI: Added _OSI(3.0 _SCP Extensions)
> [ 0.238395] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.239495] ACPI: EC: Detected MSI hardware, enabling workarounds.
> [ 0.239500] ACPI: EC: Look up EC in DSDT
> [ 0.240590] ACPI: Executed 1 blocks of module-level executable AML code
> [ 0.243103] ACPI: SSDT bffc00f0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
> [ 0.243325] ACPI: Dynamic OEM Table Load:
> [ 0.243328] ACPI: SSDT (null) 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
> [ 0.243565] ACPI: SSDT bffc0580 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
> [ 0.243786] ACPI: Dynamic OEM Table Load:
> [ 0.243789] ACPI: SSDT (null) 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
> [ 0.244029] ACPI: SSDT bffc0a10 00277 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
> [ 0.244253] ACPI: Dynamic OEM Table Load:
> [ 0.244255] ACPI: SSDT (null) 00277 (v01 DpgPmm P003Ist 00000012 INTL 20051117)
> [ 0.244489] ACPI: SSDT bffc0ea0 00277 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
> [ 0.244715] ACPI: Dynamic OEM Table Load:
> [ 0.244718] ACPI: SSDT (null) 00277 (v01 DpgPmm P004Ist 00000012 INTL 20051117)
> [ 0.244937] ACPI: Interpreter enabled
> [ 0.244956] ACPI: (supports S0 S3 S4 S5)
> [ 0.244978] ACPI: Using IOAPIC for interrupt routing
> [ 0.244997] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
> [ 0.246009] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
> [ 0.246011] PCI: Using MMCONFIG for extended config space
> [ 0.251297] ACPI: No dock devices found.
> [ 0.251299] HEST: Table not found.
> [ 0.251304] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
> [ 0.251465] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.251630] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
> [ 0.251633] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
> [ 0.251635] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
> [ 0.251638] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
> [ 0.251640] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] (ignored)
> [ 0.251642] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] (ignored)
> [ 0.251652] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600
> [ 0.251693] pci 0000:00:01.0: [8086:29c1] type 1 class 0x000604
> [ 0.251732] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
> [ 0.251735] pci 0000:00:01.0: PME# disabled
> [ 0.251770] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
> [ 0.251810] pci 0000:00:1a.0: reg 20: [io 0x9c00-0x9c1f]
> [ 0.251857] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
> [ 0.251897] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f]
> [ 0.251953] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
> [ 0.251977] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
> [ 0.252061] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
> [ 0.252066] pci 0000:00:1a.7: PME# disabled
> [ 0.252088] pci 0000:00:1b.0: [8086:293e] type 0 class 0x000403
> [ 0.252102] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
> [ 0.252164] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
> [ 0.252168] pci 0000:00:1b.0: PME# disabled
> [ 0.252186] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
> [ 0.252250] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
> [ 0.252254] pci 0000:00:1c.0: PME# disabled
> [ 0.252273] pci 0000:00:1c.1: [8086:2942] type 1 class 0x000604
> [ 0.252337] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
> [ 0.252341] pci 0000:00:1c.1: PME# disabled
> [ 0.252360] pci 0000:00:1c.2: [8086:2944] type 1 class 0x000604
> [ 0.252424] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
> [ 0.252428] pci 0000:00:1c.2: PME# disabled
> [ 0.252448] pci 0000:00:1c.4: [8086:2948] type 1 class 0x000604
> [ 0.252512] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
> [ 0.252515] pci 0000:00:1c.4: PME# disabled
> [ 0.252535] pci 0000:00:1c.5: [8086:294a] type 1 class 0x000604
> [ 0.252599] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
> [ 0.252602] pci 0000:00:1c.5: PME# disabled
> [ 0.252623] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
> [ 0.252663] pci 0000:00:1d.0: reg 20: [io 0x9800-0x981f]
> [ 0.252710] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
> [ 0.252750] pci 0000:00:1d.1: reg 20: [io 0x9480-0x949f]
> [ 0.252798] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
> [ 0.252838] pci 0000:00:1d.2: reg 20: [io 0x9400-0x941f]
> [ 0.252885] pci 0000:00:1d.3: [8086:2939] type 0 class 0x000c03
> [ 0.252924] pci 0000:00:1d.3: reg 20: [io 0x9080-0x909f]
> [ 0.252983] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
> [ 0.253003] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
> [ 0.253087] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
> [ 0.253091] pci 0000:00:1d.7: PME# disabled
> [ 0.253109] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
> [ 0.253166] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
> [ 0.253242] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
> [ 0.253287] pci 0000:00:1f.2: [8086:2921] type 0 class 0x000101
> [ 0.253301] pci 0000:00:1f.2: reg 10: [io 0x9000-0x9007]
> [ 0.253309] pci 0000:00:1f.2: reg 14: [io 0x8c00-0x8c03]
> [ 0.253316] pci 0000:00:1f.2: reg 18: [io 0x8880-0x8887]
> [ 0.253323] pci 0000:00:1f.2: reg 1c: [io 0x8800-0x8803]
> [ 0.253331] pci 0000:00:1f.2: reg 20: [io 0x8480-0x848f]
> [ 0.253338] pci 0000:00:1f.2: reg 24: [io 0x8400-0x840f]
> [ 0.253381] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05
> [ 0.253395] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
> [ 0.253414] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
> [ 0.253445] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
> [ 0.253459] pci 0000:00:1f.5: reg 10: [io 0x8000-0x8007]
> [ 0.253466] pci 0000:00:1f.5: reg 14: [io 0x7c00-0x7c03]
> [ 0.253474] pci 0000:00:1f.5: reg 18: [io 0x7880-0x7887]
> [ 0.253481] pci 0000:00:1f.5: reg 1c: [io 0x7800-0x7803]
> [ 0.253489] pci 0000:00:1f.5: reg 20: [io 0x7480-0x748f]
> [ 0.253496] pci 0000:00:1f.5: reg 24: [io 0x7400-0x740f]
> [ 0.253568] pci 0000:01:00.0: [10de:0615] type 0 class 0x000300
> [ 0.253578] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
> [ 0.253589] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.253599] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
> [ 0.253606] pci 0000:01:00.0: reg 24: [io 0xac00-0xac7f]
> [ 0.253614] pci 0000:01:00.0: reg 30: [mem 0xfe7e0000-0xfe7fffff pref]
> [ 0.253665] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 0.253668] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
> [ 0.253671] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe7fffff]
> [ 0.253675] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.253711] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
> [ 0.253774] pci 0000:03:00.0: [1095:3132] type 0 class 0x000180
> [ 0.253800] pci 0000:03:00.0: reg 10: [mem 0xfe8ffc00-0xfe8ffc7f 64bit]
> [ 0.253820] pci 0000:03:00.0: reg 18: [mem 0xfe8f8000-0xfe8fbfff 64bit]
> [ 0.253834] pci 0000:03:00.0: reg 20: [io 0xbc00-0xbc7f]
> [ 0.253859] pci 0000:03:00.0: reg 30: [mem 0xfe800000-0xfe87ffff pref]
> [ 0.253923] pci 0000:03:00.0: supports D1 D2
> [ 0.253944] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.253949] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
> [ 0.253952] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
> [ 0.253956] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
> [ 0.254021] pci 0000:04:00.0: [1095:3132] type 0 class 0x000180
> [ 0.254047] pci 0000:04:00.0: reg 10: [mem 0xfe9ffc00-0xfe9ffc7f 64bit]
> [ 0.254067] pci 0000:04:00.0: reg 18: [mem 0xfe9f8000-0xfe9fbfff 64bit]
> [ 0.254081] pci 0000:04:00.0: reg 20: [io 0xcc00-0xcc7f]
> [ 0.254106] pci 0000:04:00.0: reg 30: [mem 0xfe900000-0xfe97ffff pref]
> [ 0.254170] pci 0000:04:00.0: supports D1 D2
> [ 0.254190] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.254195] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
> [ 0.254198] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
> [ 0.254202] pci 0000:00:1c.2: bridge window [mem 0xfe900000-0xfe9fffff]
> [ 0.254258] pci 0000:05:00.0: [11ab:6121] type 0 class 0x000101
> [ 0.254274] pci 0000:05:00.0: reg 10: [io 0xdc00-0xdc07]
> [ 0.254285] pci 0000:05:00.0: reg 14: [io 0xd880-0xd883]
> [ 0.254296] pci 0000:05:00.0: reg 18: [io 0xd800-0xd807]
> [ 0.254308] pci 0000:05:00.0: reg 1c: [io 0xd480-0xd483]
> [ 0.254319] pci 0000:05:00.0: reg 20: [io 0xd400-0xd40f]
> [ 0.254330] pci 0000:05:00.0: reg 24: [mem 0xfeaffc00-0xfeafffff]
> [ 0.254392] pci 0000:05:00.0: supports D1
> [ 0.254394] pci 0000:05:00.0: PME# supported from D0 D1 D3hot
> [ 0.254398] pci 0000:05:00.0: PME# disabled
> [ 0.254414] pci 0000:05:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.254418] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
> [ 0.254422] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
> [ 0.254426] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
> [ 0.254487] pci 0000:06:00.0: [10ec:8168] type 0 class 0x000200
> [ 0.254505] pci 0000:06:00.0: reg 10: [io 0xe800-0xe8ff]
> [ 0.254535] pci 0000:06:00.0: reg 18: [mem 0xfebff000-0xfebfffff 64bit]
> [ 0.254570] pci 0000:06:00.0: reg 30: [mem 0xfebc0000-0xfebdffff pref]
> [ 0.254647] pci 0000:06:00.0: supports D1 D2
> [ 0.254649] pci 0000:06:00.0: PME# supported from D1 D2 D3hot D3cold
> [ 0.254654] pci 0000:06:00.0: PME# disabled
> [ 0.254676] pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
> [ 0.254680] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
> [ 0.254684] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
> [ 0.254688] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
> [ 0.254747] pci 0000:00:1e.0: PCI bridge to [bus 07-07] (subtractive decode)
> [ 0.254756] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
> [ 0.254759] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
> [ 0.254784] pci_bus 0000:00: on NUMA node 0
> [ 0.254787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.254932] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> [ 0.255040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
> [ 0.255081] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
> [ 0.255122] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
> [ 0.255165] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
> [ 0.255205] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
> [ 0.255334] pci0000:00: Requesting ACPI _OSC control (0x1d)
> [ 0.255490] pci0000:00: ACPI _OSC control (0x1d) granted
> [ 0.264136] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 0.264180] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)
> [ 0.264220] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15)
> [ 0.264262] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)
> [ 0.264304] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.
> [ 0.264349] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)
> [ 0.264391] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)
> [ 0.264433] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 *10 11 12 14 15)
> [ 0.264512] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
> [ 0.264512] vgaarb: loaded
> [ 0.264512] vgaarb: bridge control possible 0000:01:00.0
> [ 0.264512] SCSI subsystem initialized
> [ 0.264530] libata version 3.00 loaded.
> [ 0.264530] usbcore: registered new interface driver usbfs
> [ 0.264530] usbcore: registered new interface driver hub
> [ 0.264530] usbcore: registered new device driver usb
> [ 0.264530] PCI: Using ACPI for IRQ routing
> [ 0.264530] PCI: pci_cache_line_size set to 64 bytes
> [ 0.264530] reserve RAM buffer: 000000000009b800 - 000000000009ffff
> [ 0.264530] reserve RAM buffer: 00000000bffb0000 - 00000000bfffffff
> [ 0.265003] NetLabel: Initializing
> [ 0.265005] NetLabel: domain hash size = 128
> [ 0.265006] NetLabel: protocols = UNLABELED CIPSOv4
> [ 0.265016] NetLabel: unlabeled traffic allowed by default
> [ 0.272845] pnp: PnP ACPI init
> [ 0.272860] ACPI: bus type pnp registered
> [ 0.272959] pnp 00:00: [bus 00-ff]
> [ 0.272961] pnp 00:00: [io 0x0cf8-0x0cff]
> [ 0.272964] pnp 00:00: [io 0x0000-0x0cf7 window]
> [ 0.272971] pnp 00:00: [io 0x0d00-0xffff window]
> [ 0.272973] pnp 00:00: [mem 0x000a0000-0x000bffff window]
> [ 0.272975] pnp 00:00: [mem 0x000d0000-0x000dffff window]
> [ 0.272980] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
> [ 0.272982] pnp 00:00: [mem 0xf0000000-0xffffffff window]
> [ 0.273030] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
> [ 0.273039] pnp 00:01: [mem 0xfed14000-0xfed19fff]
> [ 0.273093] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
> [ 0.273096] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.273126] pnp 00:02: [dma 4]
> [ 0.273128] pnp 00:02: [io 0x0000-0x000f]
> [ 0.273130] pnp 00:02: [io 0x0081-0x0083]
> [ 0.273131] pnp 00:02: [io 0x0087]
> [ 0.273133] pnp 00:02: [io 0x0089-0x008b]
> [ 0.273135] pnp 00:02: [io 0x008f]
> [ 0.273136] pnp 00:02: [io 0x00c0-0x00df]
> [ 0.273161] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
> [ 0.273171] pnp 00:03: [io 0x0070-0x0071]
> [ 0.273181] pnp 00:03: [irq 8]
> [ 0.273207] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
> [ 0.273215] pnp 00:04: [io 0x0061]
> [ 0.273240] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
> [ 0.273248] pnp 00:05: [io 0x00f0-0x00ff]
> [ 0.273252] pnp 00:05: [irq 13]
> [ 0.273277] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
> [ 0.273510] pnp 00:06: [io 0x03f8-0x03ff]
> [ 0.273515] pnp 00:06: [irq 4]
> [ 0.273517] pnp 00:06: [dma 0 disabled]
> [ 0.273582] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
> [ 0.273983] pnp 00:07: [io 0x0378-0x037f]
> [ 0.273988] pnp 00:07: [irq 7]
> [ 0.273991] pnp 00:07: [dma 0 disabled]
> [ 0.274116] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
> [ 0.274142] pnp 00:08: [io 0x0060]
> [ 0.274144] pnp 00:08: [io 0x0064]
> [ 0.274149] pnp 00:08: [irq 1]
> [ 0.274184] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
> [ 0.274225] pnp 00:09: [irq 12]
> [ 0.274258] pnp 00:09: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
> [ 0.274337] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
> [ 0.274339] pnp 00:0a: [io 0x0a00-0x0adf]
> [ 0.274341] pnp 00:0a: [io 0x0ae0-0x0aef]
> [ 0.274392] system 00:0a: [io 0x0a00-0x0adf] has been reserved
> [ 0.274395] system 00:0a: [io 0x0ae0-0x0aef] has been reserved
> [ 0.274398] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274466] pnp 00:0b: [io 0x0010-0x001f]
> [ 0.274469] pnp 00:0b: [io 0x0022-0x003f]
> [ 0.274470] pnp 00:0b: [io 0x0044-0x005f]
> [ 0.274472] pnp 00:0b: [io 0x0062-0x0063]
> [ 0.274474] pnp 00:0b: [io 0x0065-0x006f]
> [ 0.274476] pnp 00:0b: [io 0x0072-0x007f]
> [ 0.274477] pnp 00:0b: [io 0x0080]
> [ 0.274479] pnp 00:0b: [io 0x0084-0x0086]
> [ 0.274481] pnp 00:0b: [io 0x0088]
> [ 0.274485] pnp 00:0b: [io 0x008c-0x008e]
> [ 0.274486] pnp 00:0b: [io 0x0090-0x009f]
> [ 0.274488] pnp 00:0b: [io 0x00a2-0x00bf]
> [ 0.274490] pnp 00:0b: [io 0x00e0-0x00ef]
> [ 0.274492] pnp 00:0b: [io 0x04d0-0x04d1]
> [ 0.274494] pnp 00:0b: [io 0x0800-0x087f]
> [ 0.274496] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
> [ 0.274498] pnp 00:0b: [io 0x0480-0x04bf]
> [ 0.274500] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
> [ 0.274502] pnp 00:0b: [mem 0xfed20000-0xfed8ffff]
> [ 0.274571] system 00:0b: [io 0x04d0-0x04d1] has been reserved
> [ 0.274573] system 00:0b: [io 0x0800-0x087f] has been reserved
> [ 0.274576] system 00:0b: [io 0x0480-0x04bf] has been reserved
> [ 0.274578] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
> [ 0.274581] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
> [ 0.274584] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274654] pnp 00:0c: [mem 0xffb00000-0xffbfffff]
> [ 0.274657] pnp 00:0c: [mem 0xfff00000-0xffffffff]
> [ 0.274685] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
> [ 0.274724] pnp 00:0d: [mem 0xffc00000-0xffefffff]
> [ 0.274774] system 00:0d: [mem 0xffc00000-0xffefffff] has been reserved
> [ 0.274777] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274850] pnp 00:0e: [mem 0xfec00000-0xfec00fff]
> [ 0.274852] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
> [ 0.274900] system 00:0e: [mem 0xfec00000-0xfec00fff] could not be reserved
> [ 0.274903] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
> [ 0.274906] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.274936] pnp 00:0f: [mem 0xe0000000-0xefffffff]
> [ 0.274991] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
> [ 0.274994] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
> [ 0.275143] pnp 00:10: [mem 0x00000000-0x0009ffff]
> [ 0.275145] pnp 00:10: [mem 0x000c0000-0x000cffff]
> [ 0.275147] pnp 00:10: [mem 0x000e0000-0x000fffff]
> [ 0.275149] pnp 00:10: [mem 0x00100000-0xbfffffff]
> [ 0.275151] pnp 00:10: [mem 0x00000000-0xffffffffffffffff disabled]
> [ 0.275210] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
> [ 0.275212] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
> [ 0.275215] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
> [ 0.275218] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved
> [ 0.275221] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
> [ 0.275337] pnp: PnP ACPI: found 17 devices
> [ 0.275339] ACPI: ACPI bus type pnp unregistered
> [ 0.312130] Switching to clocksource acpi_pm
> [ 0.312164] PCI: max bus depth: 1 pci_try_num: 2
> [ 0.312210] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
> [ 0.312213] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.312216] pci 0000:00:1c.2: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.312220] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref]
> [ 0.312223] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0800000-0xc09fffff]
> [ 0.312226] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0a00000-0xc0bfffff 64bit pref]
> [ 0.312229] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
> [ 0.312232] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> [ 0.312234] pci 0000:00:01.0: bridge window [io 0xa000-0xafff]
> [ 0.312238] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfe7fffff]
> [ 0.312241] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.312245] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
> [ 0.312248] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
> [ 0.312253] pci 0000:00:1c.0: bridge window [mem 0xc0800000-0xc09fffff]
> [ 0.312256] pci 0000:00:1c.0: bridge window [mem 0xc0a00000-0xc0bfffff 64bit pref]
> [ 0.312262] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
> [ 0.312264] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
> [ 0.312269] pci 0000:00:1c.1: bridge window [mem 0xfe800000-0xfe8fffff]
> [ 0.312273] pci 0000:00:1c.1: bridge window [mem 0xc0600000-0xc07fffff 64bit pref]
> [ 0.312278] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
> [ 0.312281] pci 0000:00:1c.2: bridge window [io 0xc000-0xcfff]
> [ 0.312285] pci 0000:00:1c.2: bridge window [mem 0xfe900000-0xfe9fffff]
> [ 0.312289] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.312294] pci 0000:00:1c.4: PCI bridge to [bus 05-05]
> [ 0.312297] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
> [ 0.312301] pci 0000:00:1c.4: bridge window [mem 0xfea00000-0xfeafffff]
> [ 0.312305] pci 0000:00:1c.4: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.312311] pci 0000:00:1c.5: PCI bridge to [bus 06-06]
> [ 0.312313] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
> [ 0.312318] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
> [ 0.312321] pci 0000:00:1c.5: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
> [ 0.312327] pci 0000:00:1e.0: PCI bridge to [bus 07-07]
> [ 0.312346] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.312349] pci 0000:00:01.0: setting latency timer to 64
> [ 0.312354] pci 0000:00:1c.0: enabling device (0104 -> 0107)
> [ 0.312361] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.312365] pci 0000:00:1c.0: setting latency timer to 64
> [ 0.312370] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> [ 0.312374] pci 0000:00:1c.1: setting latency timer to 64
> [ 0.312382] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.312385] pci 0000:00:1c.2: setting latency timer to 64
> [ 0.312390] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 0.312394] pci 0000:00:1c.4: setting latency timer to 64
> [ 0.312399] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
> [ 0.312403] pci 0000:00:1c.5: setting latency timer to 64
> [ 0.312408] pci 0000:00:1e.0: setting latency timer to 64
> [ 0.312411] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
> [ 0.312414] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
> [ 0.312416] pci_bus 0000:01: resource 0 [io 0xa000-0xafff]
> [ 0.312418] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfe7fffff]
> [ 0.312420] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
> [ 0.312423] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
> [ 0.312425] pci_bus 0000:02: resource 1 [mem 0xc0800000-0xc09fffff]
> [ 0.312427] pci_bus 0000:02: resource 2 [mem 0xc0a00000-0xc0bfffff 64bit pref]
> [ 0.312429] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
> [ 0.312431] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
> [ 0.312433] pci_bus 0000:03: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref]
> [ 0.312435] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
> [ 0.312437] pci_bus 0000:04: resource 1 [mem 0xfe900000-0xfe9fffff]
> [ 0.312440] pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
> [ 0.312442] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
> [ 0.312444] pci_bus 0000:05: resource 1 [mem 0xfea00000-0xfeafffff]
> [ 0.312446] pci_bus 0000:05: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
> [ 0.312448] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
> [ 0.312450] pci_bus 0000:06: resource 1 [mem 0xfeb00000-0xfebfffff]
> [ 0.312452] pci_bus 0000:06: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
> [ 0.312455] pci_bus 0000:07: resource 4 [io 0x0000-0xffff]
> [ 0.312457] pci_bus 0000:07: resource 5 [mem 0x00000000-0xfffffffff]
> [ 0.312481] NET: Registered protocol family 2
> [ 0.312518] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.312616] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.312960] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.313071] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.313073] TCP reno registered
> [ 0.313076] UDP hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.313084] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
> [ 0.313141] NET: Registered protocol family 1
> [ 0.313158] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 0.313174] pci 0000:00:1a.0: PCI INT A disabled
> [ 0.313186] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 0.313201] pci 0000:00:1a.1: PCI INT B disabled
> [ 0.313208] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.313229] pci 0000:00:1a.7: PCI INT C disabled
> [ 0.313248] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 0.313263] pci 0000:00:1d.0: PCI INT A disabled
> [ 0.313272] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 0.313286] pci 0000:00:1d.1: PCI INT B disabled
> [ 0.313292] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 0.313307] pci 0000:00:1d.2: PCI INT C disabled
> [ 0.313313] pci 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
> [ 0.313327] pci 0000:00:1d.3: PCI INT D disabled
> [ 0.313335] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 0.313347] pci 0000:00:1d.7: PCI INT A disabled
> [ 0.313369] pci 0000:01:00.0: Boot video device
> [ 0.313382] PCI: CLS 32 bytes, default 64
> [ 0.313436] Unpacking initramfs...
> [ 0.654154] Freeing initrd memory: 15804k freed
> [ 0.661058] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
> [ 0.661061] apm: disabled - APM is not SMP safe.
> [ 0.661195] Intel AES-NI instructions are not detected.
> [ 0.661331] audit: initializing netlink socket (disabled)
> [ 0.661346] type=2000 audit(1332788680.661:1): initialized
> [ 0.684746] highmem bounce pool size: 64 pages
> [ 0.684750] HugeTLB registered 2 MB page size, pre-allocated 0 pages
> [ 0.696126] VFS: Disk quotas dquot_6.5.2
> [ 0.696180] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 0.696691] msgmni has been set to 1678
> [ 0.696750] SELinux: Registering netfilter hooks
> [ 0.697186] alg: No test for stdrng (krng)
> [ 0.697200] NET: Registered protocol family 38
> [ 0.697242] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 0.697279] io scheduler noop registered
> [ 0.697281] io scheduler deadline registered
> [ 0.697287] io scheduler cfq registered (default)
> [ 0.697505] pcieport 0000:00:01.0: setting latency timer to 64
> [ 0.697535] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
> [ 0.697599] pcieport 0000:00:1c.0: setting latency timer to 64
> [ 0.697633] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
> [ 0.697721] pcieport 0000:00:1c.1: setting latency timer to 64
> [ 0.697755] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
> [ 0.697842] pcieport 0000:00:1c.2: setting latency timer to 64
> [ 0.697875] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
> [ 0.697964] pcieport 0000:00:1c.4: setting latency timer to 64
> [ 0.697996] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
> [ 0.698103] pcieport 0000:00:1c.5: setting latency timer to 64
> [ 0.698136] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
> [ 0.698254] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
> [ 0.698257] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
> [ 0.698260] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
> [ 0.698276] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
> [ 0.698280] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
> [ 0.698296] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
> [ 0.698298] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
> [ 0.698301] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
> [ 0.698317] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
> [ 0.698319] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
> [ 0.698323] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
> [ 0.698338] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
> [ 0.698340] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
> [ 0.698344] pcie_pme 0000:00:1c.4:pcie01: service driver pcie_pme loaded
> [ 0.698360] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
> [ 0.698362] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
> [ 0.698366] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
> [ 0.698385] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 0.698435] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 2940 ss_vid 1462 ss_did 7360
> [ 0.698453] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
> [ 0.698462] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 2942 ss_vid 1462 ss_did 7360
> [ 0.698479] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
> [ 0.698488] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 2944 ss_vid 1462 ss_did 7360
> [ 0.698505] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
> [ 0.698514] pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 2948 ss_vid 1462 ss_did 7360
> [ 0.698531] pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
> [ 0.698541] pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 294a ss_vid 1462 ss_did 7360
> [ 0.698557] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
> [ 0.698566] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
> [ 0.698568] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.698871] intel_idle: MWAIT substates: 0x20
> [ 0.698873] intel_idle: does not run on family 6 model 15
> [ 0.698943] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
> [ 0.698947] ACPI: Power Button [PWRB]
> [ 0.698992] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> [ 0.698995] ACPI: Power Button [PWRF]
> [ 0.700685] ERST: Table is not found!
> [ 0.700687] GHES: HEST is not enabled!
> [ 0.700700] isapnp: Scanning for PnP cards...
> [ 1.056514] isapnp: No Plug & Play device found
> [ 1.056602] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> [ 1.077088] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.098724] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> [ 1.107360] Non-volatile memory driver v1.3
> [ 1.107362] Linux agpgart interface v0.103
> [ 1.108483] loop: module loaded
> [ 1.108543] ahci 0000:05:00.0: version 3.0
> [ 1.108566] ata_piix 0000:00:1f.2: version 2.13
> [ 1.108578] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 1.108582] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
> [ 1.108614] ata_piix 0000:00:1f.2: setting latency timer to 64
> [ 1.108848] scsi0 : ata_piix
> [ 1.108930] scsi1 : ata_piix
> [ 1.110108] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 19
> [ 1.110112] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 19
> [ 1.110129] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 1.110136] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
> [ 1.110179] ata_piix 0000:00:1f.5: setting latency timer to 64
> [ 1.110404] scsi2 : ata_piix
> [ 1.110484] scsi3 : ata_piix
> [ 1.111539] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 19
> [ 1.111543] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 19
> [ 1.111601] Fixed MDIO Bus: probed
> [ 1.111668] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> [ 1.111682] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 1.111697] ehci_hcd 0000:00:1a.7: setting latency timer to 64
> [ 1.111700] ehci_hcd 0000:00:1a.7: EHCI Host Controller
> [ 1.111771] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
> [ 1.111792] ehci_hcd 0000:00:1a.7: debug port 1
> [ 1.115672] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
> [ 1.115686] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
> [ 1.125019] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
> [ 1.125038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.125040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.125043] usb usb1: Product: EHCI Host Controller
> [ 1.125044] usb usb1: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE ehci_hcd
> [ 1.125046] usb usb1: SerialNumber: 0000:00:1a.7
> [ 1.125163] hub 1-0:1.0: USB hub found
> [ 1.125167] hub 1-0:1.0: 4 ports detected
> [ 1.125238] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 1.125248] ehci_hcd 0000:00:1d.7: setting latency timer to 64
> [ 1.125250] ehci_hcd 0000:00:1d.7: EHCI Host Controller
> [ 1.125303] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
> [ 1.125323] ehci_hcd 0000:00:1d.7: debug port 1
> [ 1.129222] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
> [ 1.129235] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
> [ 1.139019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
> [ 1.139032] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> [ 1.139034] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.139036] usb usb2: Product: EHCI Host Controller
> [ 1.139038] usb usb2: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE ehci_hcd
> [ 1.139040] usb usb2: SerialNumber: 0000:00:1d.7
> [ 1.139148] hub 2-0:1.0: USB hub found
> [ 1.139151] hub 2-0:1.0: 8 ports detected
> [ 1.139230] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.139243] uhci_hcd: USB Universal Host Controller Interface driver
> [ 1.139258] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 1.139265] uhci_hcd 0000:00:1a.0: setting latency timer to 64
> [ 1.139267] uhci_hcd 0000:00:1a.0: UHCI Host Controller
> [ 1.139321] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
> [ 1.139350] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009c00
> [ 1.139376] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.139378] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.139380] usb usb3: Product: UHCI Host Controller
> [ 1.139382] usb usb3: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.139384] usb usb3: SerialNumber: 0000:00:1a.0
> [ 1.139491] hub 3-0:1.0: USB hub found
> [ 1.139494] hub 3-0:1.0: 2 ports detected
> [ 1.139560] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
> [ 1.139566] uhci_hcd 0000:00:1a.1: setting latency timer to 64
> [ 1.139569] uhci_hcd 0000:00:1a.1: UHCI Host Controller
> [ 1.139622] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
> [ 1.139650] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880
> [ 1.139675] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.139678] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.139680] usb usb4: Product: UHCI Host Controller
> [ 1.139682] usb usb4: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.139684] usb usb4: SerialNumber: 0000:00:1a.1
> [ 1.139788] hub 4-0:1.0: USB hub found
> [ 1.139792] hub 4-0:1.0: 2 ports detected
> [ 1.139858] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
> [ 1.139864] uhci_hcd 0000:00:1d.0: setting latency timer to 64
> [ 1.139867] uhci_hcd 0000:00:1d.0: UHCI Host Controller
> [ 1.139918] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
> [ 1.139938] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009800
> [ 1.139963] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.139966] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.139968] usb usb5: Product: UHCI Host Controller
> [ 1.139970] usb usb5: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.139972] usb usb5: SerialNumber: 0000:00:1d.0
> [ 1.140081] hub 5-0:1.0: USB hub found
> [ 1.140085] hub 5-0:1.0: 2 ports detected
> [ 1.140154] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
> [ 1.140160] uhci_hcd 0000:00:1d.1: setting latency timer to 64
> [ 1.140163] uhci_hcd 0000:00:1d.1: UHCI Host Controller
> [ 1.140224] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
> [ 1.140246] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009480
> [ 1.140271] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.140273] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.140275] usb usb6: Product: UHCI Host Controller
> [ 1.140277] usb usb6: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.140279] usb usb6: SerialNumber: 0000:00:1d.1
> [ 1.140380] hub 6-0:1.0: USB hub found
> [ 1.140384] hub 6-0:1.0: 2 ports detected
> [ 1.140447] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 1.140453] uhci_hcd 0000:00:1d.2: setting latency timer to 64
> [ 1.140456] uhci_hcd 0000:00:1d.2: UHCI Host Controller
> [ 1.140509] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
> [ 1.140529] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009400
> [ 1.140554] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.140556] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.140558] usb usb7: Product: UHCI Host Controller
> [ 1.140560] usb usb7: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.140562] usb usb7: SerialNumber: 0000:00:1d.2
> [ 1.140661] hub 7-0:1.0: USB hub found
> [ 1.140664] hub 7-0:1.0: 2 ports detected
> [ 1.140728] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
> [ 1.140734] uhci_hcd 0000:00:1d.3: setting latency timer to 64
> [ 1.140737] uhci_hcd 0000:00:1d.3: UHCI Host Controller
> [ 1.140788] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
> [ 1.140808] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00009080
> [ 1.140833] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.140835] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.140837] usb usb8: Product: UHCI Host Controller
> [ 1.140839] usb usb8: Manufacturer: Linux 3.2.10-3.fc16.i686.PAE uhci_hcd
> [ 1.140841] usb usb8: SerialNumber: 0000:00:1d.3
> [ 1.140940] hub 8-0:1.0: USB hub found
> [ 1.140943] hub 8-0:1.0: 2 ports detected
> [ 1.141062] usbcore: registered new interface driver usbserial
> [ 1.141070] USB Serial support registered for generic
> [ 1.141083] usbcore: registered new interface driver usbserial_generic
> [ 1.141085] usbserial: USB Serial Driver core
> [ 1.141144] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
> [ 1.143637] serio: i8042 KBD port at 0x60,0x64 irq 1
> [ 1.143645] serio: i8042 AUX port at 0x60,0x64 irq 12
> [ 1.143751] mousedev: PS/2 mouse device common for all mice
> [ 1.143950] rtc_cmos 00:03: RTC can wake from S4
> [ 1.144078] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> [ 1.144099] rtc0: alarms up to one month, y3k, 114 bytes nvram
> [ 1.144161] device-mapper: uevent: version 1.0.3
> [ 1.144236] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
> [ 1.144281] cpuidle: using governor ladder
> [ 1.144282] cpuidle: using governor menu
> [ 1.144415] EFI Variables Facility v0.08 2004-May-17
> [ 1.144571] usbcore: registered new interface driver usbhid
> [ 1.144572] usbhid: USB HID core driver
> [ 1.144620] ip_tables: (C) 2000-2006 Netfilter Core Team
> [ 1.144632] TCP cubic registered
> [ 1.144633] Initializing XFRM netlink socket
> [ 1.144751] NET: Registered protocol family 10
> [ 1.144865] Mobile IPv6
> [ 1.144867] NET: Registered protocol family 17
> [ 1.144881] Registering the dns_resolver key type
> [ 1.144896] Using IPI No-Shortcut mode
> [ 1.144998] PM: Hibernation image not present or could not be loaded.
> [ 1.145019] registered taskstats version 1
> [ 1.150403] Magic number: 4:464:92
> [ 1.150483] rtc_cmos 00:03: setting system clock to 2012-03-26 19:04:41 UTC (1332788681)
> [ 1.151350] Initializing network drop monitor service
> [ 1.162401] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
> [ 1.426760] ata3: SATA link down (SStatus 0 SControl 300)
> [ 1.516915] input: PS2++ Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input3
> [ 1.566064] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.566167] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 1.577063] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.581172] ata4.00: ATA-7: Maxtor 7V250F0, VA111630, max UDMA/133
> [ 1.581175] ata4.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 1.582025] usb 4-1: new low-speed USB device number 2 using uhci_hcd
> [ 1.588394] ata4.00: configured for UDMA/133
> [ 1.609231] ata1.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
> [ 1.609235] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 1.614032] ata2.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133
> [ 1.614037] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
> [ 1.662025] Refined TSC clocksource calibration: 2402.378 MHz.
> [ 1.662030] Switching to clocksource tsc
> [ 1.684197] ata1.00: configured for UDMA/133
> [ 1.684353] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> [ 1.684564] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 1.684646] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> [ 1.684744] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.684748] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.684786] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.688994] ata2.00: configured for UDMA/133
> [ 1.700155] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> [ 1.700331] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
> [ 1.700361] sd 1:0:0:0: Attached scsi generic sg1 type 0
> [ 1.700425] sd 1:0:0:0: [sdb] Write Protect is off
> [ 1.700430] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> [ 1.700466] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.700545] scsi 3:0:0:0: Direct-Access ATA Maxtor 7V250F0 VA11 PQ: 0 ANSI: 5
> [ 1.700723] sd 3:0:0:0: [sdc] 490234752 512-byte logical blocks: (251 GB/233 GiB)
> [ 1.700788] sd 3:0:0:0: Attached scsi generic sg2 type 0
> [ 1.700821] sd 3:0:0:0: [sdc] Write Protect is off
> [ 1.700825] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> [ 1.700857] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.723901] sda: sda1 sda2 sda3
> [ 1.724349] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.727281] sdc: sdc1
> [ 1.727584] sd 3:0:0:0: [sdc] Attached SCSI disk
> [ 1.728689] sdb: sdb1 sdb2 sdb3
> [ 1.729140] sd 1:0:0:0: [sdb] Attached SCSI disk
> [ 1.729227] Freeing unused kernel memory: 644k freed
> [ 1.729453] Write protecting the kernel text: 5408k
> [ 1.729508] Write protecting the kernel read-only data: 2096k
> [ 1.729512] NX-protecting the kernel data: 4832k
> [ 1.769680] usb 4-1: New USB device found, idVendor=051d, idProduct=0002
> [ 1.769685] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
> [ 1.769688] usb 4-1: Product: APC ES 725 FW:821.y2 .A USB FW:y2
> [ 1.769691] usb 4-1: Manufacturer: APC
> [ 1.769694] usb 4-1: SerialNumber: 3B0628X18842
> [ 1.866691] dracut: dracut-013-20.fc16
> [ 1.891672] udevd[123]: starting version 173
> [ 1.969644] dracut: Starting plymouth daemon
> [ 2.062877] sata_sil24 0000:03:00.0: version 1.1
> [ 2.062903] sata_sil24 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 2.062960] sata_sil24 0000:03:00.0: setting latency timer to 64
> [ 2.063039] pata_marvell 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 2.063072] pata_marvell 0000:05:00.0: setting latency timer to 64
> [ 2.064056] scsi5 : pata_marvell
> [ 2.064097] scsi4 : sata_sil24
> [ 2.064155] scsi6 : pata_marvell
> [ 2.064237] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
> [ 2.064240] ata6: PATA max UDMA/133 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 16
> [ 2.065350] scsi7 : sata_sil24
> [ 2.065434] ata7: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8f8000 irq 17
> [ 2.065438] ata8: SATA max UDMA/100 host m128@0xfe8ffc00 port 0xfe8fa000 irq 17
> [ 2.065482] sata_sil24 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
> [ 2.065537] sata_sil24 0000:04:00.0: setting latency timer to 64
> [ 2.066342] scsi8 : sata_sil24
> [ 2.069138] scsi9 : sata_sil24
> [ 2.069205] ata9: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9f8000 irq 18
> [ 2.069210] ata10: SATA max UDMA/100 host m128@0xfe9ffc00 port 0xfe9fa000 irq 18
> [ 2.218490] ata5.00: ATAPI: HL-DT-STDVD-RAM GSA-H58N, 1.03, max UDMA/66
> [ 2.224448] ata5.00: configured for UDMA/66
> [ 2.227062] scsi 5:0:0:0: CD-ROM HL-DT-ST DVD-RAM GSA-H58N 1.03 PQ: 0 ANSI: 5
> [ 2.229737] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
> [ 2.229740] cdrom: Uniform CD-ROM driver Revision: 3.20
> [ 2.229887] sr 5:0:0:0: Attached scsi CD-ROM sr0
> [ 2.230037] sr 5:0:0:0: Attached scsi generic sg3 type 5
> [ 2.240105] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.240109] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.240196] mdadm: sending ioctl 1261 to a partition!
> [ 2.240198] mdadm: sending ioctl 1261 to a partition!
> [ 2.243796] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10 Device [APC APC ES 725 FW:821.y2 .A USB FW:y2 ] on usb-0000:00:1a.1-1/input0
> [ 2.260889] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.260892] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.260976] mdadm: sending ioctl 1261 to a partition!
> [ 2.260978] mdadm: sending ioctl 1261 to a partition!
> [ 2.269999] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.270020] mdadm: sending ioctl 800c0910 to a partition!
> [ 2.294168] md: bind<sdb1>
> [ 2.309289] md: bind<sdb2>
> [ 2.311936] md: bind<sdb3>
> [ 2.333658] md: bind<sda1>
> [ 2.335596] md: raid1 personality registered for level 1
> [ 4.085035] ata7: SATA link down (SStatus 0 SControl 0)
> [ 4.201038] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 4.201371] ata9.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 4.204304] ata9.00: hard resetting link
> [ 4.542250] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 4.542289] ata9.01: hard resetting link
> [ 4.968018] ata9.01: softreset failed (SRST command error)
> [ 4.968036] ata9.01: failed to read SCR 0 (Emask=0x40)
> [ 4.968039] ata9.01: reset failed (errno=-85), retrying in 10 secs
> [ 6.105031] ata8: SATA link down (SStatus 0 SControl 0)
> [ 14.542045] ata9.01: reset failed, giving up
> [ 14.542050] ata9.15: hard resetting link
> [ 14.542053] ata9: controller in dubious state, performing PORT_RST
> [ 16.696039] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 16.696373] ata9.00: hard resetting link
> [ 17.034255] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 17.034291] ata9.01: hard resetting link
> [ 17.372252] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 17.372288] ata9.02: hard resetting link
> [ 17.798016] ata9.02: softreset failed (SRST command error)
> [ 17.908018] ata9.02: failed to read SCR 0 (Emask=0x1)
> [ 17.908022] ata9.02: reset failed (errno=-85), retrying in 10 secs
> [ 27.372093] ata9.02: reset failed, giving up
> [ 27.372097] ata9.15: hard resetting link
> [ 27.372100] ata9: controller in dubious state, performing PORT_RST
> [ 29.526040] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 29.526371] ata9.00: hard resetting link
> [ 29.864252] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 29.864289] ata9.01: hard resetting link
> [ 30.202250] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 30.202287] ata9.02: hard resetting link
> [ 30.540251] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 30.540289] ata9.03: hard resetting link
> [ 30.966013] ata9.03: softreset failed (SRST command error)
> [ 31.076018] ata9.03: failed to read SCR 0 (Emask=0x1)
> [ 31.076022] ata9.03: reset failed (errno=-85), retrying in 10 secs
> [ 40.540022] ata9.03: reset failed, giving up
> [ 40.540027] ata9.15: hard resetting link
> [ 40.540029] ata9: controller in dubious state, performing PORT_RST
> [ 42.694040] ata9.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 42.694389] ata9.00: hard resetting link
> [ 43.032252] ata9.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 43.032287] ata9.01: hard resetting link
> [ 43.370251] ata9.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 43.370286] ata9.02: hard resetting link
> [ 43.708250] ata9.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 43.708286] ata9.03: hard resetting link
> [ 44.046253] ata9.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 44.046289] ata9.04: hard resetting link
> [ 44.351390] ata9.04: SATA link down (SStatus 0 SControl 320)
> [ 44.351457] ata9.05: hard resetting link
> [ 44.656361] ata9.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 44.685158] ata9.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 44.685163] ata9.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [ 44.727185] ata9.00: configured for UDMA/100
> [ 44.755818] ata9.01: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 44.755822] ata9.01: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 44.797689] ata9.01: configured for UDMA/100
> [ 44.826404] ata9.02: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 44.826409] ata9.02: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 44.868366] ata9.02: configured for UDMA/100
> [ 44.897084] ata9.03: ATA-8: ST31500341AS, CC1H, max UDMA/133
> [ 44.897089] ata9.03: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 44.939073] ata9.03: configured for UDMA/100
> [ 44.939152] ata9: EH complete
> [ 44.939284] scsi 8:0:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 44.939460] sd 8:0:0:0: [sdd] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 44.939520] sd 8:0:0:0: Attached scsi generic sg4 type 0
> [ 44.939531] sd 8:0:0:0: [sdd] Write Protect is off
> [ 44.939535] sd 8:0:0:0: [sdd] Mode Sense: 00 3a 00 00
> [ 44.939566] sd 8:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 44.939691] scsi 8:1:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 44.939917] sd 8:1:0:0: [sde] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 44.939957] sd 8:1:0:0: Attached scsi generic sg5 type 0
> [ 44.939993] sd 8:1:0:0: [sde] Write Protect is off
> [ 44.939997] sd 8:1:0:0: [sde] Mode Sense: 00 3a 00 00
> [ 44.940049] sd 8:1:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 44.940143] scsi 8:2:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 44.940342] sd 8:2:0:0: [sdf] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 44.940426] sd 8:2:0:0: Attached scsi generic sg6 type 0
> [ 44.940432] sd 8:2:0:0: [sdf] Write Protect is off
> [ 44.940436] sd 8:2:0:0: [sdf] Mode Sense: 00 3a 00 00
> [ 44.940479] sd 8:2:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 44.940601] scsi 8:3:0:0: Direct-Access ATA ST31500341AS CC1H PQ: 0 ANSI: 5
> [ 44.940788] sd 8:3:0:0: [sdg] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
> [ 44.940843] sd 8:3:0:0: Attached scsi generic sg7 type 0
> [ 44.940865] sd 8:3:0:0: [sdg] Write Protect is off
> [ 44.940869] sd 8:3:0:0: [sdg] Mode Sense: 00 3a 00 00
> [ 44.940899] sd 8:3:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 44.948903] sdd: unknown partition table
> [ 44.949128] sd 8:0:0:0: [sdd] Attached SCSI disk
> [ 44.971385] sdg: unknown partition table
> [ 44.971540] sd 8:3:0:0: [sdg] Attached SCSI disk
> [ 44.971596] sde: unknown partition table
> [ 44.971630] sdf: unknown partition table
> [ 44.971840] sd 8:2:0:0: [sdf] Attached SCSI disk
> [ 44.971894] sd 8:1:0:0: [sde] Attached SCSI disk
> [ 47.072046] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 47.072428] ata10.15: Port Multiplier 1.1, 0x1095:0x3726 r23, 6 ports, feat 0x1/0x9
> [ 47.075710] ata10.00: hard resetting link
> [ 47.479256] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 47.479296] ata10.01: hard resetting link
> [ 47.905017] ata10.01: softreset failed (SRST command error)
> [ 47.905035] ata10.01: failed to read SCR 0 (Emask=0x40)
> [ 47.905039] ata10.01: reset failed (errno=-85), retrying in 10 secs
> [ 57.479018] ata10.01: reset failed, giving up
> [ 57.479023] ata10.15: hard resetting link
> [ 57.479026] ata10: controller in dubious state, performing PORT_RST
> [ 59.633039] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 59.633480] ata10.00: hard resetting link
> [ 60.037260] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 60.037296] ata10.01: hard resetting link
> [ 60.441258] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 60.441293] ata10.02: hard resetting link
> [ 60.867016] ata10.02: softreset failed (SRST command error)
> [ 60.977018] ata10.02: failed to read SCR 0 (Emask=0x1)
> [ 60.977022] ata10.02: reset failed (errno=-85), retrying in 10 secs
> [ 70.441017] ata10.02: reset failed, giving up
> [ 70.441023] ata10.15: hard resetting link
> [ 70.441026] ata10: controller in dubious state, performing PORT_RST
> [ 72.595047] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 72.595436] ata10.00: hard resetting link
> [ 72.999257] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 72.999295] ata10.01: hard resetting link
> [ 73.403258] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 73.403296] ata10.02: hard resetting link
> [ 73.807256] ata10.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 73.807293] ata10.03: hard resetting link
> [ 74.233017] ata10.03: softreset failed (SRST command error)
> [ 74.343014] ata10.03: failed to read SCR 0 (Emask=0x1)
> [ 74.343018] ata10.03: reset failed (errno=-85), retrying in 10 secs
> [ 83.807022] ata10.03: reset failed, giving up
> [ 83.807027] ata10.15: hard resetting link
> [ 83.807030] ata10: controller in dubious state, performing PORT_RST
> [ 85.961042] ata10.15: SATA link up 3.0 Gbps (SStatus 123 SControl 0)
> [ 85.961498] ata10.00: hard resetting link
> [ 86.365267] ata10.00: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
> [ 86.365303] ata10.01: hard resetting link
> [ 86.769251] ata10.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 86.769288] ata10.02: hard resetting link
> [ 87.173252] ata10.02: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 87.173287] ata10.03: hard resetting link
> [ 87.577251] ata10.03: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 87.577286] ata10.04: hard resetting link
> [ 87.882390] ata10.04: SATA link down (SStatus 0 SControl 320)
> [ 87.882457] ata10.05: hard resetting link
> [ 88.187364] ata10.05: SATA link up 1.5 Gbps (SStatus 113 SControl 320)
> [ 88.188237] ata10.00: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 88.188241] ata10.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [ 88.189269] ata10.00: configured for UDMA/100
> [ 88.210802] ata10.01: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 88.210807] ata10.01: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 88.211684] ata10.01: configured for UDMA/100
> [ 88.231774] ata10.02: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 88.231779] ata10.02: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 88.232656] ata10.02: configured for UDMA/100
> [ 88.242663] ata10.03: ATA-8: Hitachi HDP725050GLA360, GM4OA50E, max UDMA/133
> [ 88.242668] ata10.03: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
> [ 88.243540] ata10.03: configured for UDMA/100
> [ 88.243611] ata10: EH complete
> [ 88.243743] scsi 9:0:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 88.243940] sd 9:0:0:0: [sdh] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 88.243985] sd 9:0:0:0: Attached scsi generic sg8 type 0
> [ 88.244033] sd 9:0:0:0: [sdh] Write Protect is off
> [ 88.244037] sd 9:0:0:0: [sdh] Mode Sense: 00 3a 00 00
> [ 88.244071] sd 9:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 88.244166] scsi 9:1:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 88.244348] sd 9:1:0:0: [sdi] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 88.244429] sd 9:1:0:0: Attached scsi generic sg9 type 0
> [ 88.244435] sd 9:1:0:0: [sdi] Write Protect is off
> [ 88.244440] sd 9:1:0:0: [sdi] Mode Sense: 00 3a 00 00
> [ 88.244471] sd 9:1:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 88.244619] scsi 9:2:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 88.244876] sd 9:2:0:0: [sdj] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 88.244926] sd 9:2:0:0: Attached scsi generic sg10 type 0
> [ 88.244942] sd 9:2:0:0: [sdj] Write Protect is off
> [ 88.244946] sd 9:2:0:0: [sdj] Mode Sense: 00 3a 00 00
> [ 88.244976] sd 9:2:0:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 88.245109] scsi 9:3:0:0: Direct-Access ATA Hitachi HDP72505 GM4O PQ: 0 ANSI: 5
> [ 88.245299] sd 9:3:0:0: [sdk] 976773168 512-byte logical blocks: (500 GB/465 GiB)
> [ 88.245347] sd 9:3:0:0: Attached scsi generic sg11 type 0
> [ 88.245388] sd 9:3:0:0: [sdk] Write Protect is off
> [ 88.245392] sd 9:3:0:0: [sdk] Mode Sense: 00 3a 00 00
> [ 88.245422] sd 9:3:0:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 88.253550] sdh: unknown partition table
> [ 88.253774] sd 9:0:0:0: [sdh] Attached SCSI disk
> [ 88.278785] sdi: unknown partition table
> [ 88.278793] sdj: unknown partition table
> [ 88.278994] sd 9:1:0:0: [sdi] Attached SCSI disk
> [ 88.279011] sd 9:2:0:0: [sdj] Attached SCSI disk
> [ 88.279047] sdk: unknown partition table
> [ 88.279188] sd 9:3:0:0: [sdk] Attached SCSI disk
> [ 88.279481] bio: create slab <bio-1> at 1
> [ 88.279749] md/raid1:md0: active with 2 out of 2 mirrors
> [ 88.279779] md0: detected capacity change from 0 to 314507264
> [ 88.298379] md0:
> [ 88.299814] scsi_verify_blk_ioctl: 126 callbacks suppressed
> [ 88.299816] mdadm: sending ioctl 1261 to a partition!
> [ 88.299818] mdadm: sending ioctl 1261 to a partition!
> [ 88.314219] md: bind<sdd>
> [ 88.358298] mdadm: sending ioctl 1261 to a partition!
> [ 88.358302] mdadm: sending ioctl 1261 to a partition!
> [ 88.364485] md: bind<sdg>
> [ 88.368526] md: bind<sde>
> [ 88.372132] md: bind<sdf>
> [ 88.375045] async_tx: api initialized (async)
> [ 88.375392] xor: automatically using best checksumming function: pIII_sse
> [ 88.380003] pIII_sse : 8512.000 MB/sec
> [ 88.380006] xor: using function: pIII_sse (8512.000 MB/sec)
> [ 88.385342] mdadm: sending ioctl 1261 to a partition!
> [ 88.385345] mdadm: sending ioctl 1261 to a partition!
> [ 88.397062] raid6: int32x1 902 MB/s
> [ 88.414047] raid6: int32x2 714 MB/s
> [ 88.431056] raid6: int32x4 628 MB/s
> [ 88.448080] raid6: int32x8 710 MB/s
> [ 88.465008] raid6: mmxx1 2808 MB/s
> [ 88.482020] raid6: mmxx2 3097 MB/s
> [ 88.499006] raid6: sse1x1 1847 MB/s
> [ 88.516015] raid6: sse1x2 2453 MB/s
> [ 88.533010] raid6: sse2x1 3453 MB/s
> [ 88.550004] raid6: sse2x2 4429 MB/s
> [ 88.550006] raid6: using algorithm sse2x2 (4429 MB/s)
> [ 88.550830] md: raid6 personality registered for level 6
> [ 88.550832] md: raid5 personality registered for level 5
> [ 88.550834] md: raid4 personality registered for level 4
> [ 88.550967] md/raid:md6: device sdf operational as raid disk 2
> [ 88.550969] md/raid:md6: device sde operational as raid disk 1
> [ 88.550971] md/raid:md6: device sdg operational as raid disk 3
> [ 88.550972] md/raid:md6: device sdd operational as raid disk 0
> [ 88.551326] md/raid:md6: allocated 4216kB
> [ 88.551359] md/raid:md6: raid level 5 active with 4 out of 4 devices, algorithm 2
> [ 88.551360] RAID conf printout:
> [ 88.551362] --- level:5 rd:4 wd:4
> [ 88.551363] disk 0, o:1, dev:sdd
> [ 88.551365] disk 1, o:1, dev:sde
> [ 88.551366] disk 2, o:1, dev:sdf
> [ 88.551368] disk 3, o:1, dev:sdg
> [ 88.551395] md6: detected capacity change from 0 to 4500897595392
> [ 88.553042] md6: unknown partition table
> [ 88.553991] md: bind<sdi>
> [ 88.557237] md: bind<sdh>
> [ 88.560872] md: bind<sdk>
> [ 88.564958] md: bind<sdj>
> [ 88.567708] md/raid:md7: device sdj operational as raid disk 2
> [ 88.567712] md/raid:md7: device sdk operational as raid disk 3
> [ 88.567715] md/raid:md7: device sdh operational as raid disk 1
> [ 88.567718] md/raid:md7: device sdi operational as raid disk 0
> [ 88.568182] md/raid:md7: allocated 4216kB
> [ 88.568216] md/raid:md7: raid level 5 active with 4 out of 4 devices, algorithm 2
> [ 88.568218] RAID conf printout:
> [ 88.568221] --- level:5 rd:4 wd:4
> [ 88.568223] disk 0, o:1, dev:sdi
> [ 88.568226] disk 1, o:1, dev:sdh
> [ 88.568228] disk 2, o:1, dev:sdj
> [ 88.568230] disk 3, o:1, dev:sdk
> [ 88.568263] md7: detected capacity change from 0 to 1500315451392
> [ 88.569634] md7: unknown partition table
> [ 88.593009] mdadm: sending ioctl 1261 to a partition!
> [ 88.593012] mdadm: sending ioctl 1261 to a partition!
> [ 100.905944] md/raid1:md1: active with 1 out of 2 mirrors
> [ 100.905973] md1: detected capacity change from 0 to 311163576320
> [ 100.908115] dracut: mdadm: started /dev/md1
> [ 100.912649] md1: unknown partition table
> [ 100.915000] mdadm: sending ioctl 1261 to a partition!
> [ 100.915014] mdadm: sending ioctl 1261 to a partition!
> [ 100.922165] md/raid1:md2: active with 1 out of 2 mirrors
> [ 100.922198] md2: detected capacity change from 0 to 8589869056
> [ 100.924335] dracut: mdadm: started /dev/md2
> [ 100.945689] md2: unknown partition table
> [ 100.947251] mdadm: sending ioctl 1261 to a partition!
> [ 100.947254] mdadm: sending ioctl 1261 to a partition!
> [ 101.059473] mdadm: sending ioctl 1261 to a partition!
> [ 101.059476] mdadm: sending ioctl 1261 to a partition!
> [ 101.116097] mdadm: sending ioctl 1261 to a partition!
> [ 101.116101] mdadm: sending ioctl 1261 to a partition!
> [ 101.295531] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
> [ 101.409863] dracut: Checking ext4: /dev/disk/by-uuid/773cb4b3-4bb0-4705-b494-08cb9c2b5d73
> [ 101.409938] dracut: issuing e2fsck -a /dev/disk/by-uuid/773cb4b3-4bb0-4705-b494-08cb9c2b5d73
> [ 101.513095] dracut: /dev/disk/by-uuid/773cb4b3-4bb0-4705-b494-08cb9c2b5d73: clean, 325251/18997248 files, 4803664/75967670 blocks
> [ 101.513374] dracut: Remounting /dev/disk/by-uuid/773cb4b3-4bb0-4705-b494-08cb9c2b5d73 with -o ro
> [ 101.515482] mdadm: sending ioctl 1261 to a partition!
> [ 101.515485] mdadm: sending ioctl 1261 to a partition!
> [ 101.628453] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null)
> [ 101.648720] dracut: Mounted root filesystem /dev/md1
> [ 101.898107] dracut: Switching root
> [ 102.366666] SELinux: Disabled at runtime.
> [ 102.366691] SELinux: Unregistering netfilter hooks
> [ 102.369100] type=1404 audit(1332788782.717:2): selinux=0 auid=4294967295 ses=4294967295
> [ 102.427531] systemd[1]: RTC configured in localtime, applying delta of 540 minutes to system time.
> [ 102.496195] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora)
> [ 102.520096] systemd[1]: Set hostname to <server3>.
> [ 104.012246] EXT4-fs (md1): re-mounted. Opts: (null)
> [ 104.582180] RPC: Registered named UNIX socket transport module.
> [ 104.582182] RPC: Registered udp transport module.
> [ 104.582184] RPC: Registered tcp transport module.
> [ 104.582185] RPC: Registered tcp NFSv4.1 backchannel transport module.
> [ 104.720818] udevd[797]: starting version 173
> [ 104.841392] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
> [ 105.677974] iTCO_vendor_support: vendor-support=0
> [ 105.878333] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
> [ 105.878413] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
> [ 105.878477] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
> [ 105.896657] microcode: CPU0 sig=0x6fb, pf=0x10, revision=0x0
> [ 105.987632] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> [ 105.987656] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
> [ 105.987682] r8169 0000:06:00.0: setting latency timer to 64
> [ 105.987750] r8169 0000:06:00.0: irq 46 for MSI/MSI-X
> [ 105.987895] r8169 0000:06:00.0: eth0: RTL8168b/8111b at 0xf7e3c000, 00:1d:92:70:a3:96, XID 18000000 IRQ 46
> [ 105.987898] r8169 0000:06:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
> [ 106.102002] microcode: CPU0 updated to revision 0xba, date = 2010-10-03
> [ 106.107091] microcode: CPU1 sig=0x6fb, pf=0x10, revision=0x0
> [ 106.109515] microcode: CPU1 updated to revision 0xba, date = 2010-10-03
> [ 106.114164] microcode: CPU2 sig=0x6fb, pf=0x10, revision=0x0
> [ 106.116003] microcode: CPU2 updated to revision 0xba, date = 2010-10-03
> [ 106.121407] microcode: CPU3 sig=0x6fb, pf=0x10, revision=0x0
> [ 106.123880] microcode: CPU3 updated to revision 0xba, date = 2010-10-03
> [ 106.128492] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
> [ 106.136321] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
> [ 106.377968] parport_pc 00:07: reported by Plug and Play ACPI
> [ 106.378026] parport0: PC-style at 0x378, irq 7 [PCSPP]
> [ 106.413605] mtp-probe[971]: checking bus 4, device 2: "/sys/devices/pci0000:00/0000:00:1a.1/usb4/4-1"
> [ 106.529978] ppdev: user-space parallel port driver
> [ 106.535851] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
> [ 106.535895] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
> [ 106.535921] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
> [ 106.593022] hda_codec: ALC888: BIOS auto-probing.
> [ 106.593027] ALSA sound/pci/hda/patch_realtek.c:1275 SKU: Nid=0x1d sku_cfg=0x4007f603
> [ 106.593029] ALSA sound/pci/hda/patch_realtek.c:1277 SKU: port_connectivity=0x1
> [ 106.593031] ALSA sound/pci/hda/patch_realtek.c:1278 SKU: enable_pcbeep=0x0
> [ 106.593034] ALSA sound/pci/hda/patch_realtek.c:1279 SKU: check_sum=0x00000007
> [ 106.593036] ALSA sound/pci/hda/patch_realtek.c:1280 SKU: customization=0x000000f6
> [ 106.593038] ALSA sound/pci/hda/patch_realtek.c:1281 SKU: external_amp=0x0
> [ 106.593040] ALSA sound/pci/hda/patch_realtek.c:1282 SKU: platform_type=0x0
> [ 106.593042] ALSA sound/pci/hda/patch_realtek.c:1283 SKU: swap=0x1
> [ 106.593043] ALSA sound/pci/hda/patch_realtek.c:1284 SKU: override=0x1
> [ 106.593049] ALSA sound/pci/hda/hda_codec.c:4955 autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
> [ 106.593051] ALSA sound/pci/hda/hda_codec.c:4959 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 106.593054] ALSA sound/pci/hda/hda_codec.c:4963 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> [ 106.593056] ALSA sound/pci/hda/hda_codec.c:4964 mono: mono_out=0x0
> [ 106.593058] ALSA sound/pci/hda/hda_codec.c:4967 dig-out=0x1e/0x0
> [ 106.593060] ALSA sound/pci/hda/hda_codec.c:4968 inputs:
> [ 106.593062] ALSA sound/pci/hda/hda_codec.c:4972 Rear Mic=0x18
> [ 106.593065] ALSA sound/pci/hda/hda_codec.c:4972 Front Mic=0x19
> [ 106.593067] ALSA sound/pci/hda/hda_codec.c:4972 Line=0x1a
> [ 106.593069] ALSA sound/pci/hda/hda_codec.c:4974
> [ 106.595394] ALSA sound/pci/hda/patch_realtek.c:1338 realtek: No valid SSID, checking pincfg 0x4007f603 for NID 0x1d
> [ 106.595397] ALSA sound/pci/hda/patch_realtek.c:1354 realtek: Enabling init ASM_ID=0xf603 CODEC_ID=10ec0888
> [ 106.606845] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
> [ 106.635154] mtp-probe[971]: bus: 4, device: 2 was not an MTP device
> [ 106.903881] scsi_verify_blk_ioctl: 2 callbacks suppressed
> [ 106.903884] mdadm: sending ioctl 1261 to a partition!
> [ 106.903886] mdadm: sending ioctl 1261 to a partition!
> [ 106.904814] mdadm: sending ioctl 1261 to a partition!
> [ 106.904816] mdadm: sending ioctl 1261 to a partition!
> [ 106.905233] mdadm: sending ioctl 1261 to a partition!
> [ 106.905236] mdadm: sending ioctl 1261 to a partition!
> [ 107.192862] mdadm: sending ioctl 800c0910 to a partition!
> [ 107.192865] mdadm: sending ioctl 800c0910 to a partition!
> [ 107.192871] mdadm: sending ioctl 1261 to a partition!
> [ 107.192873] mdadm: sending ioctl 1261 to a partition!
> [ 107.575565] nvidia: module license 'NVIDIA' taints kernel.
> [ 107.575568] Disabling lock debugging due to kernel taint
> [ 107.878753] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
> [ 107.878765] nvidia 0000:01:00.0: setting latency timer to 64
> [ 107.878770] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
> [ 107.878950] NVRM: loading NVIDIA UNIX x86 Kernel Module 290.10 Wed Nov 16 19:27:25 PST 2011
> [ 107.981636] Adding 8388540k swap on /dev/md2. Priority:0 extents:1 across:8388540k
> [ 108.641751] systemd-fsck[1208]: /dev/md0: clean, 263/76304 files, 154648/307136 blocks
> [ 108.683700] systemd-fsck[1158]: RAID5_0: clean, 1971/274718720 files, 825477773/1098851952 blocks
> [ 108.850706] systemd-fsck[1191]: /dev/sdc1: clean, 103/15327232 files, 25440488/61277926 blocks (check in 3 mounts)
> [ 108.868638] EXT4-fs (md0): mounting ext3 file system using the ext4 subsystem
> [ 108.878625] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: (null)
> [ 108.949111] systemd-fsck[1162]: EXCHANGE: clean, 151350/183156736 files, 228850362/366287952 blocks
> [ 108.982476] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
> [ 109.157712] EXT4-fs (md7): mounted filesystem with ordered data mode. Opts: (null)
> [ 109.278467] EXT4-fs (md6): mounted filesystem with ordered data mode. Opts: (null)
> [ 109.826668] fedora-storage-init[1224]: \xffffffe8\xffffffab\xffffff96\xffffffab\xffffff96\xffffffe7\xffffff90\xffffff86\xffffff90\xffffff86\xffffffe3\xffffff83\xffffff9c\xffffff83\xffffff9c\xffffffe3\xffffff83\xffffffaa\xffffff83\xffffffaa\xffffffe3\xffffff83\xffffffa5\xffffff83\xffffffa5\xffffffe3\xffffff83\xffffffbc\xffffff83\xffffffbc\xffffffe3\xffffff83\xffffffa0\xffffff83\xffffffa0\xffffffe7\xffffffae\xffffffa1\xffffffae\xffffffa1\xffffffe7\xffffff90\xffffff86\xffffff90\xffffff86\xffffffe3\xffffff82\xffffff92\xffffff82\xffffff92\xffffffe8\xffffffa8\xffffffad\xffffffa8\xffffffad\xffffffe5\xffffffae\xffffff9a\xffffffae\xffffff9a\xffffffe4\xffffffb8\xffffffad\xffffffb8\xffffffad: No volume groups found
> [ 109.827119] fedora-storage-init[1224]: [ OK ]
> [ 110.047199] fedora-storage-init[1267]: \xffffffe8\xffffffab\xffffff96\xffffffab\xffffff96\xffffffe7\xffffff90\xffffff86\xffffff90\xffffff86\xffffffe3\xffffff83\xffffff9c\xffffff83\xffffff9c\xffffffe3\xffffff83\xffffffaa\xffffff83\xffffffaa\xffffffe3\xffffff83\xffffffa5\xffffff83\xffffffa5\xffffffe3\xffffff83\xffffffbc\xffffff83\xffffffbc\xffffffe3\xffffff83\xffffffa0\xffffff83\xffffffa0\xffffffe7\xffffffae\xffffffa1\xffffffae\xffffffa1\xffffffe7\xffffff90\xffffff86\xffffff90\xffffff86\xffffffe3\xffffff82\xffffff92\xffffff82\xffffff92\xffffffe8\xffffffa8\xffffffad\xffffffa8\xffffffad\xffffffe5\xffffffae\xffffff9a\xffffffae\xffffff9a\xffffffe4\xffffffb8\xffffffad\xffffffb8\xffffffad: No volume groups found
> [ 110.047820] fedora-storage-init[1267]: [ OK ]
> [ 110.246400] lvm[1274]: No volume groups found
> [ 112.320113] ntpd[1320]: ntpd 4.2.6p4@1.2324-o Thu Oct 6 15:37:56 UTC 2011 (1)
> [ 112.344874] ntpd[1320]: proto: precision = 0.393 usec
> [ 112.344880] ntpd[1320]: 0.0.0.0 c01d 0d kern kernel time sync enabled
> [ 113.173142] systemd[1]: nscd.service: Supervising process 1378 which is not our child. We'll most likely not notice when it exits.
> [ 117.556889] r8169 0000:06:00.0: eth0: link down
> [ 117.556895] r8169 0000:06:00.0: eth0: link down
> [ 117.557053] ADDRCONF(NETDEV_UP): eth0: link is not ready
> [ 119.924279] r8169 0000:06:00.0: eth0: link up
> [ 119.924424] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> [ 123.802802] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
> [ 123.821298] NFSD: starting 90-second grace period
> [ 147.021977] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
> [ 162.662480] fuse init (API version 7.17)
> [ 164.794923] Bluetooth: Core ver 2.16
> [ 164.794947] NET: Registered protocol family 31
> [ 164.794949] Bluetooth: HCI device and connection manager initialized
> [ 164.794951] Bluetooth: HCI socket layer initialized
> [ 164.794953] Bluetooth: L2CAP socket layer initialized
> [ 164.794957] Bluetooth: SCO socket layer initialized
> [ 164.834501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> [ 164.834504] Bluetooth: BNEP filters: protocol multicast
> [ 169.671853] FS-Cache: Loaded
> [ 169.696998] FS-Cache: Netfs 'nfs' registered for caching
------
next prev parent reply other threads:[~2012-03-28 5:22 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <201203122030.q2CKUjb2022067@bzweb02.app.bz.hst.phx2.redhat.com>
2012-03-13 4:28 ` libata-pmp patch for 3.2.x and later for eSATA Port Multiplier Sil3726 ANEZAKI, Akira
2012-03-13 16:56 ` Fwd: " Mark Lord
2012-03-18 18:35 ` ANEZAKI, Akira
2012-03-21 9:09 ` Gwendal Grignou
2012-03-22 4:36 ` ANEZAKI, Akira
2012-03-22 8:14 ` black
2012-03-22 8:16 ` ANEZAKI, Akira
2012-03-22 12:51 ` Gwendal Grignou
2012-03-22 14:02 ` ANEZAKI, Akira
2012-03-22 16:16 ` Gwendal Grignou
2012-03-22 16:16 ` Gwendal Grignou
2012-03-22 17:55 ` ANEZAKI, Akira
2012-03-23 5:14 ` Gwendal Grignou
2012-03-23 6:40 ` ANEZAKI, Akira
2012-03-23 8:31 ` Gwendal Grignou
2012-03-23 9:59 ` ANEZAKI, Akira
2012-03-25 1:19 ` ANEZAKI, Akira
2012-03-25 15:28 ` Gwendal Grignou
2012-03-26 0:41 ` ANEZAKI, Akira
2012-03-26 1:42 ` black
2012-03-26 1:46 ` ANEZAKI, Akira
2012-03-26 2:30 ` ANEZAKI, Akira
2012-03-26 9:50 ` ANEZAKI, Akira
2012-03-26 11:26 ` ANEZAKI, Akira
2012-03-27 11:17 ` Gwendal Grignou
2012-03-27 12:26 ` ANEZAKI, Akira
2012-03-27 12:26 ` ANEZAKI, Akira
2012-03-27 13:18 ` ANEZAKI, Akira
2012-03-27 13:18 ` ANEZAKI, Akira
2012-03-27 13:46 ` black
2012-03-27 13:46 ` black
2012-03-27 14:10 ` ANEZAKI, Akira
2012-03-27 14:10 ` ANEZAKI, Akira
2012-03-29 6:32 ` Gwendal Grignou
2012-03-29 7:19 ` ANEZAKI, Akira
2012-03-29 7:19 ` ANEZAKI, Akira
2012-03-28 5:22 ` ANEZAKI, Akira [this message]
2012-03-28 5:22 ` ANEZAKI, Akira
2012-03-28 5:29 ` ANEZAKI, Akira
2012-03-28 5:29 ` ANEZAKI, Akira
2012-03-29 6:08 ` Gwendal Grignou
2012-03-29 6:08 ` Gwendal Grignou
2012-03-29 6:27 ` ANEZAKI, Akira
2012-03-29 6:27 ` ANEZAKI, Akira
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F72A027.7040907@yahoo.co.jp \
--to=fireblade1230@yahoo.co.jp \
--cc=gwendal@google.com \
--cc=jgarzik@pobox.com \
--cc=kernel@teksavvy.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.