[Lustre-devel] Lustre-devel Digest, Vol 72, Issue 17

[Lustre-devel] Lustre-devel Digest, Vol 72, Issue 17

[Chris Gearing]

Hi Roman,

> Problem 1
>
> Currently Lustre and test are living in one code space and build in one
> time,and often have specific dependencies between test and code.
>
> This situation directly affect
>
> 1) interoperability testing between different version. (because testing
> is started from client which have different test framework then server
> and client remotely execute test framework as their own. just copying
> tests for equalization could not work with big difference between versions)
>
> 2) it is not simple execute(especially in automation) testing for test.
> F.e. a bug is fixed, the test on it added. Executing the test on an old
> revision(probably on a previous release) should show failed test result.
> But with big difference between versions where fixed and where execute
> test-framework can fail to start.
>
> Possible solution: split Lustre and lustre tests in  code and  build
> levels. It means that lustre and tests will not be connected on code
> revision, only by logic, f.e. via keywords. Also should be added in same
> time an abstraction level in test framework which allows to execute
> lustre utils from different version of lustre.
The situation here is exactly the same as exists with the source code. 
When we run interop tests the test system runs test scripts belonging to 
the server version against those belonging to the client version. So we 
might use 1.8.7 client scripts against 2.2 server scripts. These scripts 
need to inter-operate in exactly the same way that the Lustre source 
code itself needs to interoperate.

If people find cases where this does not happen then they raise bugs 
against Lustre and these are fixed using the same processes as any other 
Lustre bug. This means people across the community investing effort to 
rectify the incompatibilities and then posting patches for review, test 
and inclusion in the product. Of course in a perfect world we would be 
back at the point where 1.8.7 and 2.x forked and never allow the 
interoperability issues in the test scripts to creep in, but the reality 
is the issues do exist and effort does needs to be spent resolving them. 
I am 100% sure that the resolution of the relatively few 
incompatibilities is infinitely easier than attempting to take the 1.8, 
2.1 and 2.2 test scripts and produce an independent one size fits all 
solution.

We currently track each failing test in Jira, see here 
http://jira.whamcloud.com/browse/LU-1193  for an example. If others find 
issues in their testing then they should create Jira issues to track 
them and if possible post patches to resolve them.

>
>
> Problem 2
>
> (to avoid term problems, I call there: sanity = test suite, 130 = test,
> 130c and 130a = test cases)
>
> Different test cases, ended with letter(f.e. 130c),  have an different
> idea of dependencies. Some test cases have dependences to previous test
> cases, some don't have.
>
> All they now can be executed with "ONLY" parameter and all they have
> separated item in result yaml file as just separated tests( which
> doesn't have test cases ended with letter, f.e. sanity 129). Also, tests
> which have testcases and don't have their own body can be execute  with
> ONLY parameter( but doesn't have their special result).
>
> So, logically, all test which can be execute via using ONLY must be not
> depended to other tests. But we have test which depended. Moreover, some
> developers prefer to consider testcases as step of full one test.
>
> What is entities which I call "testcases" and "test" from your point of
> view?
>
> Answer of this question affect automated test execution and test
> development, and maybe ask some test-framework changes.
>
I think you highlight a very good point here that we don't really know 
enough about the test contents, their prerequisites or other 
dependencies. I would suggest that many attempts have been made over the 
years to use naming conventions, numeric ordering or other similar 
mechanisms to track such behaviour.

What we need to make sense of the 1000+ test cases we have is an 
extensible knowledge-base of information that can grow overtime to 
become a rich source of information that can be used to allow automated 
systems as well as developers to confidently use the tests in the most 
flexible way possible.

Because of the nature of Lustre we need to find a way that keeps this 
knowledge within the public domain, provides for use to expand the range 
of things we store about each test and provides for both people and 
machines to access it with equal ease.

One reasonable proposal is to add a comment block at the start of each 
test script and subtest within that script that lists the test name, 
short and long description that includes what the test is supposed to be 
doing, what bug (if any) it was originally added for, what part of the 
code it is intended to cover, prerequisites (filesystem initialization, 
min/max number of clients, OSTs, MDTs it can test with, etc) in a 
machine readable format that it not only documents the test today but 
that can be expanded in the future.

Once we have an agreement on an initial format for this comment block, 
the development community can work to populate it for each subtest and 
improve the understanding and usefulness of all existing tests.

Thanks

Chris Gearing
Sr. Software Engineer
Quality Engineering
Whamcloud Inc

[Lustre-devel] your opinion about testing improvements (was Lustre-devel Digest, Vol 72, Issue 17)

[Roman Grigoryev]

Hi Chris,
Thank you for answer ( I have cut part of my original message):

>> Problem 1
>>
>> Currently Lustre and test are living in one code space and build in one
>> time,and often have specific dependencies between test and code.
......

>> Possible solution: split Lustre and lustre tests in  code and  build
>> levels. It means that lustre and tests will not be connected on code
>> revision, only by logic, f.e. via keywords. Also should be added in same
>> time an abstraction level in test framework which allows to execute
>> lustre utils from different version of lustre.
> The situation here is exactly the same as exists with the source code.

> When we run interop tests the test system runs test scripts belonging to
> the server version against those belonging to the client version. So we
> might use 1.8.7 client scripts against 2.2 server scripts. These scripts
> need to inter-operate in exactly the same way that the Lustre source
> code itself needs to interoperate.

Yes, it is. But I don't see why we should use old test base for
interoperability testing? Between 1.8.7 and 2.x tests was fixed and also
as test framework was changed. For getting same test coverage for old
features we should backport new fixes in test to old (maybe already
frozen) code.
Also, as results, we have different tests sets for compatibility
testing. For 1.8.7 it will one, for 2.1 - other. Only a part of
differences shows difference between code base for one feature set.
(F.e. we see on special 1.8.7 branch failures which already fixed in 2.x
code.)


> 
> If people find cases where this does not happen then they raise bugs
> against Lustre and these are fixed using the same processes as any other
> Lustre bug. This means people across the community investing effort to
> rectify the incompatibilities and then posting patches for review, test
> and inclusion in the product. Of course in a perfect world we would be
> back at the point where 1.8.7 and 2.x forked and never allow the
> interoperability issues in the test scripts to creep in, but the reality
> is the issues do exist and effort does needs to be spent resolving them.
> I am 100% sure that the resolution of the relatively few
> incompatibilities is infinitely easier than attempting to take the 1.8,
> 2.1 and 2.2 test scripts and produce an independent one size fits all
> solution.
> 

I agree that there is a lot of work on test framework abstraction layer
also on adding simple filtering procedure and setting keywords.

But having one test base give us good possibility just setup an actual
test package on all nodes and have somehow predict executed test set.
Also, in this letter below, we discuss test/test framework changes. If
we will have separated tests between version package then benefits from
new tests descriptors we be accessible for all previous system too. In
other case we could create incompatible improvements.


> We currently track each failing test in Jira, see here
> http://jira.whamcloud.com/browse/LU-1193  for an example. If others find
> issues in their testing then they should create Jira issues to track
> them and if possible post patches to resolve them.

Thanks for this link. Do you have any keyword or attribute for
interoperability failures?

> 
>>
>>
>> Problem 2
>>
>> (to avoid term problems, I call there: sanity = test suite, 130 = test,
>> 130c and 130a = test cases)
>>

...

>> Answer of this question affect automated test execution and test
>> development, and maybe ask some test-framework changes.
>>
> I think you highlight a very good point here that we don't really know
> enough about the test contents, their prerequisites or other
> dependencies. I would suggest that many attempts have been made over the
> years to use naming conventions, numeric ordering or other similar
> mechanisms to track such behaviour.
> 
> What we need to make sense of the 1000+ test cases we have is an
> extensible knowledge-base of information that can grow overtime to
> become a rich source of information that can be used to allow automated
> systems as well as developers to confidently use the tests in the most
> flexible way possible.
> 
> Because of the nature of Lustre we need to find a way that keeps this
> knowledge within the public domain, provides for use to expand the range
> of things we store about each test and provides for both people and
> machines to access it with equal ease.
> 
> One reasonable proposal is to add a comment block at the start of each
> test script and subtest within that script that lists the test name,
> short and long description that includes what the test is supposed to be
> doing, what bug (if any) it was originally added for, what part of the
> code it is intended to cover, prerequisites (filesystem initialization,
> min/max number of clients, OSTs, MDTs it can test with, etc) in a
> machine readable format that it not only documents the test today but
> that can be expanded in the future.

I agree, it is very important to separating meta information and test body.
Internally in Xyratex, we use external scripts and descriptors which
somehow add same possibility(per-test timeouts, keywords...).

> 
> Once we have an agreement on an initial format for this comment block,
> the development community can work to populate it for each subtest and
> improve the understanding and usefulness of all existing tests.

I absolutely agree that we need agreement to start any work on test
improvements. How can we initiate this process? Maybe good first step is
creating glossary to use and terms and based on these terms fix tests?

Also, what do you think about a possible simple solutions for decreasing
dependence problem which is currently pretty painful for us:

1) test(test scenario) must have only number name (1,2,3..110...999)
2) test cases (test step) must have number+char index (1f,2,b...99c)

Only Test can be executed via ONLY.
Test cases can be execute only as part of test.

Thanks,
	Roman

[Lustre-devel] your opinion about testing improvements (was Lustre-devel Digest, Vol 72, Issue 17)

[Chris Gearing]

On 03/04/2012 07:07, Roman Grigoryev wrote:
> Hi Chris,
> Thank you for answer ( I have cut part of my original message):
>> When we run interop tests the test system runs test scripts belonging to
>> the server version against those belonging to the client version. So we
>> might use 1.8.7 client scripts against 2.2 server scripts. These scripts
>> need to inter-operate in exactly the same way that the Lustre source
>> code itself needs to interoperate.
> Yes, it is. But I don't see why we should use old test base for
> interoperability testing? Between 1.8.7 and 2.x tests was fixed and also
> as test framework was changed. For getting same test coverage for old
> features we should backport new fixes in test to old (maybe already
> frozen) code.
> Also, as results, we have different tests sets for compatibility
> testing. For 1.8.7 it will one, for 2.1 - other. Only a part of
> differences shows difference between code base for one feature set.
> (F.e. we see on special 1.8.7 branch failures which already fixed in 2.x
> code.)
>
We don't have a single script because the tests are at times very 
tightly coupled to the Lustre version. There were a lot of changes 
between 1.8.x and 2.x and a lot of corresponding changes to the test 
scripts. Where the tests are the same and bugs were found in the 2.x 
test scripts these should have been backported to the 1.8.x test scripts 
if this was not done then we should do it for inclusion into the 1.8.8 
release.

The notion of making 'master' scripts work with with all versions is 
obviously possible but it is a very significant task and given that the 
scripts themselves are written in a language (sic) that does not provide 
structure a single script strategy is likely to create many more 
'interoperability issues' than it fixes.

Also it's worth considering that we have best part of a 1000 discrete 
changes, whenever a test is re-engineered the test itself must be proven 
to detect failure as well as success. i.e. If someone produced a version 
independent test set that passed all versions we would not know that the 
process was a success, we would need to check that each re-engineered 
test 'failed' appropriately for each Lustre version, this is a big task 
that I doubt can be properly achieved in bash.

So in summary the best solution given what we have today is to back port 
fixes to the test scripts as we back port fixes to the code. This is an 
investment in time and requires the same discipline to test as we have 
for coding. A single set of scripts that caters for all versions appears 
I believe like an easy solution but actually would require huge 
investment that would be better spent developing a modern test framework 
and infrastructure that can support Lustre for the next ten years.

>
>>>
>>> Problem 2
>>>
>>> (to avoid term problems, I call there: sanity = test suite, 130 = test,
>>> 130c and 130a = test cases)
>>>
> ...
>
>>> Answer of this question affect automated test execution and test
>>> development, and maybe ask some test-framework changes.
>>>
>> I think you highlight a very good point here that we don't really know
>> enough about the test contents, their prerequisites or other
>> dependencies. I would suggest that many attempts have been made over the
>> years to use naming conventions, numeric ordering or other similar
>> mechanisms to track such behaviour.
>> ...
>> One reasonable proposal is to add a comment block at the start of each
>> test script and subtest within that script that lists the test name,
>> short and long description that includes what the test is supposed to be
>> doing, what bug (if any) it was originally added for, what part of the
>> code it is intended to cover, prerequisites (filesystem initialization,
>> min/max number of clients, OSTs, MDTs it can test with, etc) in a
>> machine readable format that it not only documents the test today but
>> that can be expanded in the future.
> I agree, it is very important to separating meta information and test body.
> Internally in Xyratex, we use external scripts and descriptors which
> somehow add same possibility(per-test timeouts, keywords...).
>
>> Once we have an agreement on an initial format for this comment block,
>> the development community can work to populate it for each subtest and
>> improve the understanding and usefulness of all existing tests.
> I absolutely agree that we need agreement to start any work on test
> improvements. How can we initiate this process? Maybe good first step is
> creating glossary to use and terms and based on these terms fix tests?
>
> Also, what do you think about a possible simple solutions for decreasing
> dependence problem which is currently pretty painful for us:
>
> 1) test(test scenario) must have only number name (1,2,3..110...999)
> 2) test cases (test step) must have number+char index (1f,2,b...99c)
>
> Only Test can be executed via ONLY.
> Test cases can be execute only as part of test.
I don't think there is a problem with this simple solution in that it 
does no harm as long as you applied any changes to all the branches that 
are applicable. At the same time I will draft a possible meta data 
format that includes the extensible metadata within the source in a way 
that maximizes its value both today and in the future, we can then 
review, revise and then agree that format on Lustre-Devel, although I'll 
mail you privately so you can have input before that. It may actually be 
the case that some work has occurred on this topic previously and if so 
we can leverage that.

Thanks

Chris Gearing
Sr. Software Engineer
Quality Engineering
Whamcloud Inc

[Lustre-devel] your opinion about testing improvements (was Lustre-devel Digest, Vol 72, Issue 17)

[Nathan Rutman]

On Apr 3, 2012, at 7:21 AM, Chris Gearing wrote:

> On 03/04/2012 07:07, Roman Grigoryev wrote:
>> Hi Chris,
>> Thank you for answer ( I have cut part of my original message):
>>> When we run interop tests the test system runs test scripts belonging to
>>> the server version against those belonging to the client version. So we
>>> might use 1.8.7 client scripts against 2.2 server scripts. These scripts
>>> need to inter-operate in exactly the same way that the Lustre source
>>> code itself needs to interoperate.
>> Yes, it is. But I don't see why we should use old test base for
>> interoperability testing? Between 1.8.7 and 2.x tests was fixed and also
>> as test framework was changed. For getting same test coverage for old
>> features we should backport new fixes in test to old (maybe already
>> frozen) code.
>> Also, as results, we have different tests sets for compatibility
>> testing. For 1.8.7 it will one, for 2.1 - other. Only a part of
>> differences shows difference between code base for one feature set.
>> (F.e. we see on special 1.8.7 branch failures which already fixed in 2.x
>> code.)
>> 
> We don't have a single script because the tests are at times very 
> tightly coupled to the Lustre version. There were a lot of changes 
> between 1.8.x and 2.x and a lot of corresponding changes to the test 
> scripts. Where the tests are the same and bugs were found in the 2.x 
> test scripts these should have been backported to the 1.8.x test scripts 
> if this was not done then we should do it for inclusion into the 1.8.8 
> release.
> 
> The notion of making 'master' scripts work with with all versions is 
> obviously possible but it is a very significant task and given that the 
> scripts themselves are written in a language (sic) that does not provide 
> structure a single script strategy is likely to create many more 
> 'interoperability issues' than it fixes.
> 
> Also it's worth considering that we have best part of a 1000 discrete 
> changes, whenever a test is re-engineered the test itself must be proven 
> to detect failure as well as success. i.e. If someone produced a version 
> independent test set that passed all versions we would not know that the 
> process was a success, we would need to check that each re-engineered 
> test 'failed' appropriately for each Lustre version, this is a big task 
> that I doubt can be properly achieved in bash.
> 
> So in summary the best solution given what we have today is to back port 
> fixes to the test scripts as we back port fixes to the code. This is an 
> investment in time and requires the same discipline to test as we have 
> for coding. A single set of scripts that caters for all versions appears 
> I believe like an easy solution but actually would require huge 
> investment that would be better spent developing a modern test framework 
> and infrastructure that can support Lustre for the next ten years.

I agree on this last point -- is that something that OpenSFS should spearhead?
Roman has pointed out some of the limitations with the current test framework,
Robert Read has pointed out the poor/redundant coverage of many of the existing tests;
is it time to start from scratch?  Is there a more evolutionary approach we can/should use?


> 
>> 
>>>> 
>>>> Problem 2
>>>> 
>>>> (to avoid term problems, I call there: sanity = test suite, 130 = test,
>>>> 130c and 130a = test cases)
>>>> 
>> ...
>> 
>>>> Answer of this question affect automated test execution and test
>>>> development, and maybe ask some test-framework changes.
>>>> 
>>> I think you highlight a very good point here that we don't really know
>>> enough about the test contents, their prerequisites or other
>>> dependencies. I would suggest that many attempts have been made over the
>>> years to use naming conventions, numeric ordering or other similar
>>> mechanisms to track such behaviour.
>>> ...
>>> One reasonable proposal is to add a comment block at the start of each
>>> test script and subtest within that script that lists the test name,
>>> short and long description that includes what the test is supposed to be
>>> doing, what bug (if any) it was originally added for, what part of the
>>> code it is intended to cover, prerequisites (filesystem initialization,
>>> min/max number of clients, OSTs, MDTs it can test with, etc) in a
>>> machine readable format that it not only documents the test today but
>>> that can be expanded in the future.
>> I agree, it is very important to separating meta information and test body.
>> Internally in Xyratex, we use external scripts and descriptors which
>> somehow add same possibility(per-test timeouts, keywords...).
>> 
>>> Once we have an agreement on an initial format for this comment block,
>>> the development community can work to populate it for each subtest and
>>> improve the understanding and usefulness of all existing tests.
>> I absolutely agree that we need agreement to start any work on test
>> improvements. How can we initiate this process? Maybe good first step is
>> creating glossary to use and terms and based on these terms fix tests?
>> 
>> Also, what do you think about a possible simple solutions for decreasing
>> dependence problem which is currently pretty painful for us:
>> 
>> 1) test(test scenario) must have only number name (1,2,3..110...999)
>> 2) test cases (test step) must have number+char index (1f,2,b...99c)
>> 
>> Only Test can be executed via ONLY.
>> Test cases can be execute only as part of test.
> I don't think there is a problem with this simple solution in that it 
> does no harm as long as you applied any changes to all the branches that 
> are applicable. At the same time I will draft a possible meta data 
> format that includes the extensible metadata within the source in a way 
> that maximizes its value both today and in the future, we can then 
> review, revise and then agree that format on Lustre-Devel, although I'll 
> mail you privately so you can have input before that. It may actually be 
> the case that some work has occurred on this topic previously and if so 
> we can leverage that.
> 
> Thanks
> 
> Chris Gearing
> Sr. Software Engineer
> Quality Engineering
> Whamcloud Inc
> _______________________________________________
> Lustre-devel mailing list
> Lustre-devel at lists.lustre.org
> http://lists.lustre.org/mailman/listinfo/lustre-devel

[Lustre-devel] your opinion about testing improvements (was Lustre-devel Digest, Vol 72, Issue 17)

[Chris Gearing]

Hi Nathan,

Please excuse the lack of included context but I think it's fair to say
that the current test-framework and scripts are at the end of their
evolutionary life and that whilst they will be required to fulfil a role in
test for the foreseeable future what is required is a vastly more capable
and scalable approach to testing Lustre in particular and massively
parallel exascale file systems in general.

Thanks

Chris
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-devel-lustre.org/attachments/20120409/c7e8d637/attachment.htm>

[Lustre-devel] your opinion about testing improvements (was Lustre-devel Digest, Vol 72, Issue 17)

[Nathan Rutman]

Agreed.  We started a conversation on the last TWG call about this; 
I was waiting for John Carrier's meeting minutes to carry on that conversation.


On Apr 8, 2012, at 5:04 PM, Chris Gearing wrote:


	Hi Nathan,

	Please excuse the lack of included context but I think it's fair to say that the current test-framework and scripts are at the end of their evolutionary life and that whilst they will be required to fulfil a role in test for the foreseeable future what is required is a vastly more capable and scalable approach to testing Lustre in particular and massively parallel exascale file systems in general.

	Thanks

	Chris


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-devel-lustre.org/attachments/20120409/ff3088ed/attachment.htm>

[Lustre-devel] [Twg] your opinion about testing improvements (was Lustre-devel Digest, Vol 72, Issue 17)

[Alexander Lezhoev]

Hi Chris,

I completely agree that the test-framework must be significantly 
revised. We have some plans to improve it and I think, it would be 
useful to share our ideas and visions of this task. Really we considered 
the separation of tests and Lustre code as a part of the framework 
improvement. So I think, we need to share our approaches and develop a 
conception which would be satisfactory for all. What do you think about 
opening a discussion about new test-framework?

-- 
Alexander Lezhoev.
Morpheus test team.
Xyratex.



On 04/03/2012 06:21 PM, Chris Gearing wrote:
>
> We don't have a single script because the tests are at times very 
> tightly coupled to the Lustre version. There were a lot of changes 
> between 1.8.x and 2.x and a lot of corresponding changes to the test 
> scripts. Where the tests are the same and bugs were found in the 2.x 
> test scripts these should have been backported to the 1.8.x test 
> scripts if this was not done then we should do it for inclusion into 
> the 1.8.8 release.
>
> The notion of making 'master' scripts work with with all versions is 
> obviously possible but it is a very significant task and given that 
> the scripts themselves are written in a language (sic) that does not 
> provide structure a single script strategy is likely to create many 
> more 'interoperability issues' than it fixes.
>
> Also it's worth considering that we have best part of a 1000 discrete 
> changes, whenever a test is re-engineered the test itself must be 
> proven to detect failure as well as success. i.e. If someone produced 
> a version independent test set that passed all versions we would not 
> know that the process was a success, we would need to check that each 
> re-engineered test 'failed' appropriately for each Lustre version, 
> this is a big task that I doubt can be properly achieved in bash.
>
> So in summary the best solution given what we have today is to back 
> port fixes to the test scripts as we back port fixes to the code. This 
> is an investment in time and requires the same discipline to test as 
> we have for coding. A single set of scripts that caters for all 
> versions appears I believe like an easy solution but actually would 
> require huge investment that would be better spent developing a modern 
> test framework and infrastructure that can support Lustre for the next 
> ten years.
>

[Lustre-devel] [Twg] your opinion about testing improvements (was Lustre-devel Digest, Vol 72, Issue 17)

[Alex Tomas]

while technically this is possible, the framework will have to support
different versions of Lustre
because in some cases they implement functionality different ways with
different side effects
(often used in t-f). which kind of contradicts with the original idea ?

thanks, Alex

On Thu, Apr 5, 2012 at 12:40 PM, Alexander Lezhoev
<Alexander_Lezhoev@xyratex.com> wrote:
> Hi Chris,
>
> I completely agree that the test-framework must be significantly revised. We
> have some plans to improve it and I think, it would be useful to share our
> ideas and visions of this task. Really we considered the separation of tests
> and Lustre code as a part of the framework improvement. So I think, we need
> to share our approaches and develop a conception which would be satisfactory
> for all. What do you think about opening a discussion about new
> test-framework?
>
> --
> Alexander Lezhoev.
> Morpheus test team.
> Xyratex.
>
>
>
>
> On 04/03/2012 06:21 PM, Chris Gearing wrote:
>>
>>
>> We don't have a single script because the tests are at times very tightly
>> coupled to the Lustre version. There were a lot of changes between 1.8.x and
>> 2.x and a lot of corresponding changes to the test scripts. Where the tests
>> are the same and bugs were found in the 2.x test scripts these should have
>> been backported to the 1.8.x test scripts if this was not done then we
>> should do it for inclusion into the 1.8.8 release.
>>
>> The notion of making 'master' scripts work with with all versions is
>> obviously possible but it is a very significant task and given that the
>> scripts themselves are written in a language (sic) that does not provide
>> structure a single script strategy is likely to create many more
>> 'interoperability issues' than it fixes.
>>
>> Also it's worth considering that we have best part of a 1000 discrete
>> changes, whenever a test is re-engineered the test itself must be proven to
>> detect failure as well as success. i.e. If someone produced a version
>> independent test set that passed all versions we would not know that the
>> process was a success, we would need to check that each re-engineered test
>> 'failed' appropriately for each Lustre version, this is a big task that I
>> doubt can be properly achieved in bash.
>>
>> So in summary the best solution given what we have today is to back port
>> fixes to the test scripts as we back port fixes to the code. This is an
>> investment in time and requires the same discipline to test as we have for
>> coding. A single set of scripts that caters for all versions appears I
>> believe like an easy solution but actually would require huge investment
>> that would be better spent developing a modern test framework and
>> infrastructure that can support Lustre for the next ten years.
>>
>
>
> _______________________________________________
> twg mailing list
> twg at lists.opensfs.org
> http://lists.opensfs.org/listinfo.cgi/twg-opensfs.org

[Lustre-devel] your opinion about testing improvements (was Lustre-devel Digest, Vol 72, Issue 17)

[Nathan Rutman]

On the 4/5 TWG concall we discussed this further, and came up with 5 items that we would
like to address.

discussion:
   Xyratex started by suggesting that the test suite included with every
   Lustre release needed reworking.  This led to a group conversation
   that focused on the following areas:
   
   1) refactor unused tests
      Test scripts have grown unwieldly and do not form a coherent
      test package.  As a result, there are some tests that are
      used regularly and others that ineffective and skipped.  We
      should remove the unused tests.
      
   2) create single test suite
      Each release has its own test suite and assumes that the client
      and server will use the same test version.  It is becoming common
      today to have different client/server versions.  In this case, it
      is unclear which tests from which release package should be used.
      Instead, we should have a single test suite that accommodates
      different combinations of client and server versions.  
      
   3) extract individual tests from the scripts
      Many of the tests are run as a suite.  There needs to be some
      mechanism to allow running components of the suite independently.
      To do this, we will need to make clear the dependencies of the
      subtests so that users know a test can be run only after another
      component of the test has executed.  Also mentioned was the need
      for a common header on all test results to facilitate
      post-processing.
      
   4) client failure shouldn't stop the tests
      The goal is never to have test failures, nonethelees failures
      currently can stall test progress.  The suites need to be written
      to allow for client failures.  
      
   5) increase code coverage
      There are new tests that we should consider adding to the Lustre
      suite in order to increase code coverage. Suggestions were xfstest
      and some of the MPI tests. 


Obviously this is not as bold as Chris' statement, which, by the way, I am happy to entertain as well.  Do others have anything to add to the list above, or thoughts on proceeding with a completely new architecture?


On Apr 8, 2012, at 5:04 PM, Chris Gearing wrote:

	Hi Nathan,

	Please excuse the lack of included context but I think it's fair to say that the current test-framework and scripts are at the end of their evolutionary life and that whilst they will be required to fulfil a role in test for the foreseeable future what is required is a vastly more capable and scalable approach to testing Lustre in particular and massively parallel exascale file systems in general.

	Thanks

	Chris







On Apr 3, 2012, at 7:21 AM, Chris Gearing wrote:


	On 03/04/2012 07:07, Roman Grigoryev wrote:
	

		Hi Chris,
		

		Thank you for answer ( I have cut part of my original message):
		

			When we run interop tests the test system runs test scripts belonging to
			

			the server version against those belonging to the client version. So we
			

			might use 1.8.7 client scripts against 2.2 server scripts. These scripts
			

			need to inter-operate in exactly the same way that the Lustre source
			

			code itself needs to interoperate.
			

		Yes, it is. But I don't see why we should use old test base for
		

		interoperability testing? Between 1.8.7 and 2.x tests was fixed and also
		

		as test framework was changed. For getting same test coverage for old
		

		features we should backport new fixes in test to old (maybe already
		

		frozen) code.
		

		Also, as results, we have different tests sets for compatibility
		

		testing. For 1.8.7 it will one, for 2.1 - other. Only a part of
		

		differences shows difference between code base for one feature set.
		

		(F.e. we see on special 1.8.7 branch failures which already fixed in 2.x
		

		code.)
		


	We don't have a single script because the tests are at times very 
	tightly coupled to the Lustre version. There were a lot of changes 
	between 1.8.x and 2.x and a lot of corresponding changes to the test 
	scripts. Where the tests are the same and bugs were found in the 2.x 
	test scripts these should have been backported to the 1.8.x test scripts 
	if this was not done then we should do it for inclusion into the 1.8.8 
	release.
	
	The notion of making 'master' scripts work with with all versions is 
	obviously possible but it is a very significant task and given that the 
	scripts themselves are written in a language (sic) that does not provide 
	structure a single script strategy is likely to create many more 
	'interoperability issues' than it fixes.
	
	Also it's worth considering that we have best part of a 1000 discrete 
	changes, whenever a test is re-engineered the test itself must be proven 
	to detect failure as well as success. i.e. If someone produced a version 
	independent test set that passed all versions we would not know that the 
	process was a success, we would need to check that each re-engineered 
	test 'failed' appropriately for each Lustre version, this is a big task 
	that I doubt can be properly achieved in bash.
	
	So in summary the best solution given what we have today is to back port 
	fixes to the test scripts as we back port fixes to the code. This is an 
	investment in time and requires the same discipline to test as we have 
	for coding. A single set of scripts that caters for all versions appears 
	I believe like an easy solution but actually would require huge 
	investment that would be better spent developing a modern test framework 
	and infrastructure that can support Lustre for the next ten years.
	
	



				Problem 2
				


				(to avoid term problems, I call there: sanity = test suite, 130 = test,
				

				130c and 130a = test cases)
				


		...
		


				Answer of this question affect automated test execution and test
				

				development, and maybe ask some test-framework changes.
				


			I think you highlight a very good point here that we don't really know
			

			enough about the test contents, their prerequisites or other
			

			dependencies. I would suggest that many attempts have been made over the
			

			years to use naming conventions, numeric ordering or other similar
			

			mechanisms to track such behaviour.
			

			...
			

			One reasonable proposal is to add a comment block at the start of each
			

			test script and subtest within that script that lists the test name,
			

			short and long description that includes what the test is supposed to be
			

			doing, what bug (if any) it was originally added for, what part of the
			

			code it is intended to cover, prerequisites (filesystem initialization,
			

			min/max number of clients, OSTs, MDTs it can test with, etc) in a
			

			machine readable format that it not only documents the test today but
			

			that can be expanded in the future.
			

		I agree, it is very important to separating meta information and test body.
		

		Internally in Xyratex, we use external scripts and descriptors which
		

		somehow add same possibility(per-test timeouts, keywords...).
		


			Once we have an agreement on an initial format for this comment block,
			

			the development community can work to populate it for each subtest and
			

			improve the understanding and usefulness of all existing tests.
			

		I absolutely agree that we need agreement to start any work on test
		

		improvements. How can we initiate this process? Maybe good first step is
		

		creating glossary to use and terms and based on these terms fix tests?
		


		Also, what do you think about a possible simple solutions for decreasing
		

		dependence problem which is currently pretty painful for us:
		


		1) test(test scenario) must have only number name (1,2,3..110...999)
		

		2) test cases (test step) must have number+char index (1f,2,b...99c)
		


		Only Test can be executed via ONLY.
		

		Test cases can be execute only as part of test.
		

	I don't think there is a problem with this simple solution in that it 
	does no harm as long as you applied any changes to all the branches that 
	are applicable. At the same time I will draft a possible meta data 
	format that includes the extensible metadata within the source in a way 
	that maximizes its value both today and in the future, we can then 
	review, revise and then agree that format on Lustre-Devel, although I'll 
	mail you privately so you can have input before that. It may actually be 
	the case that some work has occurred on this topic previously and if so 
	we can leverage that.
	
	Thanks
	
	Chris Gearing
	Sr. Software Engineer
	Quality Engineering
	Whamcloud Inc
	_______________________________________________
	Lustre-devel mailing list
	Lustre-devel at lists.lustre.org
	http://lists.lustre.org/mailman/listinfo/lustre-devel
	


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-devel-lustre.org/attachments/20120411/22bf0994/attachment.htm>