* Can't build ti-dmai
@ 2012-04-04 16:06 Gary Thomas
2012-04-04 20:51 ` Gary Thomas
0 siblings, 1 reply; 4+ messages in thread
From: Gary Thomas @ 2012-04-04 16:06 UTC (permalink / raw)
To: meta-ti
Trying to build ti-dmai gives this error:
ERROR: Function failed: do_install (see
/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360 for further information)
ERROR: Logfile of failure stored in:
/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360
Log data follows:
| ERROR: Function failed: do_install (see
/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360 for further information)
| make -C ./packages/ti/sdo/dmai install
| make[1]: Entering directory
`/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai'
| make[1]: Nothing to be done for `install'.
| make[1]: Leaving directory
`/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai'
| make -C ./packages/ti/sdo/dmai/apps install
| make[1]: Entering directory
`/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps'
|
| Executing make in subdirectory Makefile...
| make: Entering an unknown directory
| make: *** Makefile: Not a directory. Stop.
| make: Leaving an unknown directory
| make[1]: *** [Makefile] Error 2
| make[1]: Leaving directory
`/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps'
| make: *** [install] Error 2
NOTE: package ti-dmai-1_2_10_00_01+svnr642-r118o: task do_install: Failed
ERROR: Task 3 (/local/new-angstrom/sources/meta-ti/recipes-ti/dmai/ti-dmai_svn.bb, do_install) failed with exit code '1'
NOTE: Tasks Summary: Attempted 1134 tasks of which 783 didn't need to be rerun and 1 failed.
Summary: 1 task failed:
/local/new-angstrom/sources/meta-ti/recipes-ti/dmai/ti-dmai_svn.bb, do_install
I'm using this configuration (up to date):
OE Build Configuration:
BB_VERSION = "1.15.1"
TARGET_ARCH = "arm"
TARGET_OS = "linux-gnueabi"
MACHINE = "beagleboard"
DISTRO = "angstrom"
DISTRO_VERSION = "v2012.04-core"
TUNE_FEATURES = "armv7a vfp neon cortexa8"
TARGET_FPU = "vfp-neon"
meta-angstrom = "master:6e986067a5b5be696c0115c6b4395f21cb6d771a"
meta-oe
toolchain-layer
meta-efl
meta-gpe
meta-gnome
meta-xfce
meta-initramfs = "master:d248ea6ada38ba9070f45f4fd2ab107bc6ed0246"
meta-opie = "master:efa3892b20a4ef80274e56e5633ebd62c16f9731"
meta-java = "master:3e8579a967664c0e4b6f047c70f6893b72dc9573"
meta-mozilla = "master:5737d9fa26a632a27b2aa760c0d01190f0a17d0e"
meta-ti = "master:246cb75a970e9aab0a3974a55e72c6d90f1df151"
meta-efikamx = "master:2c09a3a780b23448e8a6ca964256ff7f5ccba65d"
meta-nslu2 = "master:3d9fc951b05b4df476374b6fc3085ebac7f293ee"
meta-htc
meta-nokia
meta-openmoko
meta-palm = "master:ba34166f4565b52209adea82cef196615cf82246"
meta-handheld = "master:df6d514ae413f131e95d0f0c6c3b6792a006d451"
meta-intel
meta-sugarbay
meta-crownbay
meta-emenlow
meta-fishriver
meta-jasperforest
meta-n450 = "master:f89405e115d73426c8a6450b6e795b5885d6bdf3"
meta = "master:1634d736c55f767fe82a46bbb7f83c32006fece9"
Any ideas/pointers?
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Can't build ti-dmai
2012-04-04 16:06 Can't build ti-dmai Gary Thomas
@ 2012-04-04 20:51 ` Gary Thomas
2012-04-05 15:42 ` Gary Thomas
0 siblings, 1 reply; 4+ messages in thread
From: Gary Thomas @ 2012-04-04 20:51 UTC (permalink / raw)
To: meta-ti
On 2012-04-04 10:06, Gary Thomas wrote:
> Trying to build ti-dmai gives this error:
> ERROR: Function failed: do_install (see
> /local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360 for further information)
> ERROR: Logfile of failure stored in:
> /local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360
> Log data follows:
> | ERROR: Function failed: do_install (see
> /local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360 for further information)
> | make -C ./packages/ti/sdo/dmai install
> | make[1]: Entering directory
> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai'
>
> | make[1]: Nothing to be done for `install'.
> | make[1]: Leaving directory
> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai'
>
> | make -C ./packages/ti/sdo/dmai/apps install
> | make[1]: Entering directory
> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps'
>
> |
> | Executing make in subdirectory Makefile...
> | make: Entering an unknown directory
> | make: *** Makefile: Not a directory. Stop.
> | make: Leaving an unknown directory
> | make[1]: *** [Makefile] Error 2
> | make[1]: Leaving directory
> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps'
>
> | make: *** [install] Error 2
> NOTE: package ti-dmai-1_2_10_00_01+svnr642-r118o: task do_install: Failed
> ERROR: Task 3 (/local/new-angstrom/sources/meta-ti/recipes-ti/dmai/ti-dmai_svn.bb, do_install) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 1134 tasks of which 783 didn't need to be rerun and 1 failed.
>
> Summary: 1 task failed:
> /local/new-angstrom/sources/meta-ti/recipes-ti/dmai/ti-dmai_svn.bb, do_install
>
> I'm using this configuration (up to date):
> OE Build Configuration:
> BB_VERSION = "1.15.1"
> TARGET_ARCH = "arm"
> TARGET_OS = "linux-gnueabi"
> MACHINE = "beagleboard"
> DISTRO = "angstrom"
> DISTRO_VERSION = "v2012.04-core"
> TUNE_FEATURES = "armv7a vfp neon cortexa8"
> TARGET_FPU = "vfp-neon"
> meta-angstrom = "master:6e986067a5b5be696c0115c6b4395f21cb6d771a"
> meta-oe
> toolchain-layer
> meta-efl
> meta-gpe
> meta-gnome
> meta-xfce
> meta-initramfs = "master:d248ea6ada38ba9070f45f4fd2ab107bc6ed0246"
> meta-opie = "master:efa3892b20a4ef80274e56e5633ebd62c16f9731"
> meta-java = "master:3e8579a967664c0e4b6f047c70f6893b72dc9573"
> meta-mozilla = "master:5737d9fa26a632a27b2aa760c0d01190f0a17d0e"
> meta-ti = "master:246cb75a970e9aab0a3974a55e72c6d90f1df151"
> meta-efikamx = "master:2c09a3a780b23448e8a6ca964256ff7f5ccba65d"
> meta-nslu2 = "master:3d9fc951b05b4df476374b6fc3085ebac7f293ee"
> meta-htc
> meta-nokia
> meta-openmoko
> meta-palm = "master:ba34166f4565b52209adea82cef196615cf82246"
> meta-handheld = "master:df6d514ae413f131e95d0f0c6c3b6792a006d451"
> meta-intel
> meta-sugarbay
> meta-crownbay
> meta-emenlow
> meta-fishriver
> meta-jasperforest
> meta-n450 = "master:f89405e115d73426c8a6450b6e795b5885d6bdf3"
> meta = "master:1634d736c55f767fe82a46bbb7f83c32006fece9"
>
> Any ideas/pointers?
>
This line in the Makefile is getting strange/different results:
SUBDIRS = $(sort $(dir $(wildcard */)))
I've found the weirdness, but I don't understand what's going on. I changed
the Makefile to print $(SUBDIRS) to try and figure it out.
When bitbake runs make in
/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps
the result is
Makefile.app/ Makefile/ Makefile~/ app_common.cfg/ app_common.tci/ audio_decode1/ audio_decode_io/ audio_decode_io1/ audio_encode1/ audio_encode_io1/ dmai.gel/ fc_common.cfg/
image_decode_io/ image_decode_io1/ image_encode_io/ image_encode_io1/ speech_decode1/ speech_decode_io1/ speech_encode1/ speech_encode_io1/ video_decode_io/ video_decode_io2/
video_display/ video_encode_io/ video_encode_io1/ video_encode_io_multich1/ video_loopback/ video_loopback_blend/ video_loopback_convert/ video_loopback_copy/ video_loopback_resize/
the real result should be
audio_decode1/ audio_decode_io/ audio_decode_io1/ audio_encode1/ audio_encode_io1/ image_decode_io/ image_decode_io1/ image_encode_io/ image_encode_io1/ speech_decode1/
speech_decode_io1/ speech_encode1/ speech_encode_io1/ video_decode_io/ video_decode_io2/ video_display/ video_encode_io/ video_encode_io1/ video_encode_io_multich1/ video_loopback/
video_loopback_blend/ video_loopback_convert/ video_loopback_copy/ video_loopback_resize/
which I get if I execute make in that directory maually! The bitbake build
is failing because files are being treated as directories (listed in $(SUBDIRS))
Can someone explain this? I also had the Makefile print the
value of $(MAKE) and it's always /usr/bin/make
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Can't build ti-dmai
2012-04-04 20:51 ` Gary Thomas
@ 2012-04-05 15:42 ` Gary Thomas
2012-04-09 1:54 ` Denys Dmytriyenko
0 siblings, 1 reply; 4+ messages in thread
From: Gary Thomas @ 2012-04-05 15:42 UTC (permalink / raw)
To: meta-ti
On 2012-04-04 14:51, Gary Thomas wrote:
> On 2012-04-04 10:06, Gary Thomas wrote:
>> Trying to build ti-dmai gives this error:
>> ERROR: Function failed: do_install (see
>> /local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360 for further information)
>> ERROR: Logfile of failure stored in:
>> /local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360
>> Log data follows:
>> | ERROR: Function failed: do_install (see
>> /local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/temp/log.do_install.21360 for further information)
>> | make -C ./packages/ti/sdo/dmai install
>> | make[1]: Entering directory
>> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai'
>>
>>
>> | make[1]: Nothing to be done for `install'.
>> | make[1]: Leaving directory
>> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai'
>>
>>
>> | make -C ./packages/ti/sdo/dmai/apps install
>> | make[1]: Entering directory
>> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps'
>>
>>
>> |
>> | Executing make in subdirectory Makefile...
>> | make: Entering an unknown directory
>> | make: *** Makefile: Not a directory. Stop.
>> | make: Leaving an unknown directory
>> | make[1]: *** [Makefile] Error 2
>> | make[1]: Leaving directory
>> `/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps'
>>
>>
>> | make: *** [install] Error 2
>> NOTE: package ti-dmai-1_2_10_00_01+svnr642-r118o: task do_install: Failed
>> ERROR: Task 3 (/local/new-angstrom/sources/meta-ti/recipes-ti/dmai/ti-dmai_svn.bb, do_install) failed with exit code '1'
>> NOTE: Tasks Summary: Attempted 1134 tasks of which 783 didn't need to be rerun and 1 failed.
>>
>> Summary: 1 task failed:
>> /local/new-angstrom/sources/meta-ti/recipes-ti/dmai/ti-dmai_svn.bb, do_install
>>
>> I'm using this configuration (up to date):
>> OE Build Configuration:
>> BB_VERSION = "1.15.1"
>> TARGET_ARCH = "arm"
>> TARGET_OS = "linux-gnueabi"
>> MACHINE = "beagleboard"
>> DISTRO = "angstrom"
>> DISTRO_VERSION = "v2012.04-core"
>> TUNE_FEATURES = "armv7a vfp neon cortexa8"
>> TARGET_FPU = "vfp-neon"
>> meta-angstrom = "master:6e986067a5b5be696c0115c6b4395f21cb6d771a"
>> meta-oe
>> toolchain-layer
>> meta-efl
>> meta-gpe
>> meta-gnome
>> meta-xfce
>> meta-initramfs = "master:d248ea6ada38ba9070f45f4fd2ab107bc6ed0246"
>> meta-opie = "master:efa3892b20a4ef80274e56e5633ebd62c16f9731"
>> meta-java = "master:3e8579a967664c0e4b6f047c70f6893b72dc9573"
>> meta-mozilla = "master:5737d9fa26a632a27b2aa760c0d01190f0a17d0e"
>> meta-ti = "master:246cb75a970e9aab0a3974a55e72c6d90f1df151"
>> meta-efikamx = "master:2c09a3a780b23448e8a6ca964256ff7f5ccba65d"
>> meta-nslu2 = "master:3d9fc951b05b4df476374b6fc3085ebac7f293ee"
>> meta-htc
>> meta-nokia
>> meta-openmoko
>> meta-palm = "master:ba34166f4565b52209adea82cef196615cf82246"
>> meta-handheld = "master:df6d514ae413f131e95d0f0c6c3b6792a006d451"
>> meta-intel
>> meta-sugarbay
>> meta-crownbay
>> meta-emenlow
>> meta-fishriver
>> meta-jasperforest
>> meta-n450 = "master:f89405e115d73426c8a6450b6e795b5885d6bdf3"
>> meta = "master:1634d736c55f767fe82a46bbb7f83c32006fece9"
>>
>> Any ideas/pointers?
>>
>
> This line in the Makefile is getting strange/different results:
> SUBDIRS = $(sort $(dir $(wildcard */)))
>
> I've found the weirdness, but I don't understand what's going on. I changed
> the Makefile to print $(SUBDIRS) to try and figure it out.
>
> When bitbake runs make in
> /local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps
>
> the result is
> Makefile.app/ Makefile/ Makefile~/ app_common.cfg/ app_common.tci/ audio_decode1/ audio_decode_io/ audio_decode_io1/ audio_encode1/ audio_encode_io1/ dmai.gel/ fc_common.cfg/
> image_decode_io/ image_decode_io1/ image_encode_io/ image_encode_io1/ speech_decode1/ speech_decode_io1/ speech_encode1/ speech_encode_io1/ video_decode_io/ video_decode_io2/
> video_display/ video_encode_io/ video_encode_io1/ video_encode_io_multich1/ video_loopback/ video_loopback_blend/ video_loopback_convert/ video_loopback_copy/ video_loopback_resize/
>
> the real result should be
> audio_decode1/ audio_decode_io/ audio_decode_io1/ audio_encode1/ audio_encode_io1/ image_decode_io/ image_decode_io1/ image_encode_io/ image_encode_io1/ speech_decode1/
> speech_decode_io1/ speech_encode1/ speech_encode_io1/ video_decode_io/ video_decode_io2/ video_display/ video_encode_io/ video_encode_io1/ video_encode_io_multich1/ video_loopback/
> video_loopback_blend/ video_loopback_convert/ video_loopback_copy/ video_loopback_resize/
>
> which I get if I execute make in that directory maually! The bitbake build
> is failing because files are being treated as directories (listed in $(SUBDIRS))
>
> Can someone explain this? I also had the Makefile print the
> value of $(MAKE) and it's always /usr/bin/make
It seems to be a bug (or change in behaviour) in make 3.82 which
is on Fedora 16. When I use make 3.81, the build succeeds.
--
------------------------------------------------------------
Gary Thomas | Consulting for the
MLB Associates | Embedded world
------------------------------------------------------------
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Can't build ti-dmai
2012-04-05 15:42 ` Gary Thomas
@ 2012-04-09 1:54 ` Denys Dmytriyenko
0 siblings, 0 replies; 4+ messages in thread
From: Denys Dmytriyenko @ 2012-04-09 1:54 UTC (permalink / raw)
To: Gary Thomas; +Cc: meta-ti
On Thu, Apr 05, 2012 at 09:42:27AM -0600, Gary Thomas wrote:
> On 2012-04-04 14:51, Gary Thomas wrote:
> >On 2012-04-04 10:06, Gary Thomas wrote:
> >>|
> >>| Executing make in subdirectory Makefile...
> >>| make: Entering an unknown directory
> >>| make: *** Makefile: Not a directory. Stop.
> >>| make: Leaving an unknown directory
> >>| make[1]: *** [Makefile] Error 2
> >>| make[1]: Leaving directory
> >>`/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps'
> >>
> >>
> >
> >This line in the Makefile is getting strange/different results:
> >SUBDIRS = $(sort $(dir $(wildcard */)))
> >
> >I've found the weirdness, but I don't understand what's going on. I changed
> >the Makefile to print $(SUBDIRS) to try and figure it out.
> >
> >When bitbake runs make in
> >/local/new-angstrom/build/tmp-angstrom_2010_x-eglibc/work/beagleboard-angstrom-linux-gnueabi/ti-dmai-1_2_10_00_01+svnr642-r118o/trunk/davinci_multimedia_application_interface/dmai_2_10_00_01+svnr642/dmai/packages/ti/sdo/dmai/apps
> >
> >the result is
> >Makefile.app/ Makefile/ Makefile~/ app_common.cfg/ app_common.tci/ audio_decode1/ audio_decode_io/ audio_decode_io1/ audio_encode1/ audio_encode_io1/ dmai.gel/ fc_common.cfg/
> >image_decode_io/ image_decode_io1/ image_encode_io/ image_encode_io1/ speech_decode1/ speech_decode_io1/ speech_encode1/ speech_encode_io1/ video_decode_io/ video_decode_io2/
> >video_display/ video_encode_io/ video_encode_io1/ video_encode_io_multich1/ video_loopback/ video_loopback_blend/ video_loopback_convert/ video_loopback_copy/ video_loopback_resize/
> >
> >the real result should be
> >audio_decode1/ audio_decode_io/ audio_decode_io1/ audio_encode1/ audio_encode_io1/ image_decode_io/ image_decode_io1/ image_encode_io/ image_encode_io1/ speech_decode1/
> >speech_decode_io1/ speech_encode1/ speech_encode_io1/ video_decode_io/ video_decode_io2/ video_display/ video_encode_io/ video_encode_io1/ video_encode_io_multich1/ video_loopback/
> >video_loopback_blend/ video_loopback_convert/ video_loopback_copy/ video_loopback_resize/
> >
> >which I get if I execute make in that directory maually! The bitbake build
> >is failing because files are being treated as directories (listed in $(SUBDIRS))
> >
> >Can someone explain this? I also had the Makefile print the
> >value of $(MAKE) and it's always /usr/bin/make
>
> It seems to be a bug (or change in behaviour) in make 3.82 which
> is on Fedora 16. When I use make 3.81, the build succeeds.
Gary,
I've seen similar issues with make 3.82 here:
http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/9/focus=25
I fixed it with this patch:
http://thread.gmane.org/gmane.linux.embedded.yocto.meta-ti/27
It probaly won't help with your problem though, maybe just a pointer... I
won't be able to look into ti-dmai issues right away, but hopefully soon.
Please let me know and/or send a patch if you find the solution for this
yourself. Thanks.
--
Denys
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-04-09 1:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-04 16:06 Can't build ti-dmai Gary Thomas
2012-04-04 20:51 ` Gary Thomas
2012-04-05 15:42 ` Gary Thomas
2012-04-09 1:54 ` Denys Dmytriyenko
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.