Re: 3.3.1 ath9k regression

Re: 3.3.1 ath9k regression

[Ortwin Glück]

I am seeing similar symptoms as Michael Leun, using NetworkManager and ath9k 
built-in (not as a module):

Apr  5 20:09:14 mithril NetworkManager[2575]: <info> (wlan0): supplicant 
connection state:
   scanning -> associating
Apr  5 20:09:15 mithril kernel: wlan0: authenticate with xxx (try 1)
Apr  5 20:09:15 mithril kernel: wlan0: authenticate with xxx (try 2)
Apr  5 20:09:15 mithril kernel: wlan0: authenticate with xxx (try 3)
Apr  5 20:09:15 mithril kernel: wlan0: authentication with xxx timed out
Apr  5 20:09:17 mithril NetworkManager[2575]: <warn> (wlan0): link timed out.
Apr  5 20:09:25 mithril NetworkManager[2575]: <info> (wlan0): supplicant 
connection state:
   associating -> disconnected
Apr  5 20:09:25 mithril NetworkManager[2575]: <info> (wlan0): supplicant 
connection state:
   disconnected -> scanning
Apr  5 20:09:25 mithril kernel: ath: Failed to stop TX DMA, queues=0x001!


Reproducible 100% of the time. Reverting 
db6a6a78d8602964c9dfb1d8ce18daefd92da0a7 fixes the problem.

Hope that helps,

Ortwin

Re: 3.3.1 ath9k regression

[Martin]

On 04/03/2012 08:10 AM, Ben Greear wrote:
> Ath9k list should be interested in this...
>
> Ben
>
> On 04/02/2012 10:46 PM, Kelly Anderson wrote:
>> This patch in 3.3.1 is causing ath9k device not to show/work on bootup.
>> ifconfig does not show the device unless I revert this patch. With the
>> patch
>> reverted the device works as expected. This is verified on two different
>> machines that are both using ath9k mini-pcie wifi cards.
>>
>>>> ath9k: fix going to full-sleep on PS idle
>>
>>>> commit c1afdaff90538ef085b756454f12b29575411214 upstream.
>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe
>> linux-kernel" in
>> the body of a message to majordomo@vger.kernel.org
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>> Please read the FAQ at http://www.tux.org/lkml/

fwiw, I find the same issue on an Asus P50IJ, same fix by reverting the 
commit from above.

Martin


02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless 
Network Adapter (PCI-Express) (rev 01)
	Subsystem: AzureWave Device 1089
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at feaf0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=375mA 
PME(D0+,D1+,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
		Address: 00000000  Data: 0000
	Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 
<512ns, L1 <64us
			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- 
BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- 
ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Kernel driver in use: ath9k

3.3.1 ath9k regression

[Kelly Anderson]

This patch in 3.3.1 is causing ath9k device not to show/work on bootup.
ifconfig does not show the device unless I revert this patch. With the patch
reverted the device works as expected.  This is verified on two different
machines that are both using ath9k mini-pcie wifi cards.

>>  ath9k: fix going to full-sleep on PS idle

>>     commit c1afdaff90538ef085b756454f12b29575411214 upstream.

Re: 3.3.1 ath9k regression

[Ben Greear]

Ath9k list should be interested in this...

Ben

On 04/02/2012 10:46 PM, Kelly Anderson wrote:
> This patch in 3.3.1 is causing ath9k device not to show/work on bootup.
> ifconfig does not show the device unless I revert this patch. With the patch
> reverted the device works as expected. This is verified on two different
> machines that are both using ath9k mini-pcie wifi cards.
>
>>> ath9k: fix going to full-sleep on PS idle
>
>>> commit c1afdaff90538ef085b756454f12b29575411214 upstream.
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/


-- 
Ben Greear <greearb@candelatech.com>
Candela Technologies Inc  http://www.candelatech.com

Re: 3.3.1 ath9k regression

[Mantas M.]

[Kelly - use `journalctl -a` or just `dmesg` to get full logs.]

I have a similar bug with Atheros AR9285 on a ASUS K52JT laptop. The
device appears, but refuses to connect to any AP, timing out in less
than a second. (3.3-ARCH did not have this bug.)

dmesg output while trying to connect to an open AP follows.

> # modprobe ath9k
> [  213.662569] ath: EEPROM regdomain: 0x60
> [  213.662574] ath: EEPROM indicates we should expect a direct regpair map
> [  213.662580] ath: Country alpha2 being used: 00
> [  213.662583] ath: Regpair used: 0x60
> [  213.664533] ieee80211 phy1: Selected rate control algorithm 'ath9k_rate_control'
> [  213.666228] Registered led device: ath9k-phy1
> [  213.666255] ieee80211 phy1: Atheros AR9285 Rev:2 mem=0xffffc90022d60000, irq=17

> # ip link set wlan0 up
> [  215.577316] ADDRCONF(NETDEV_UP): wlan0: link is not ready

> # iw wlan0 connect -w cloud
> [  217.667382] wlan0: authenticate with 00:23:8e:e1:6c:c8 (try 1)
> [  217.864456] wlan0: authenticate with 00:23:8e:e1:6c:c8 (try 2)
> [  218.063975] wlan0: authenticate with 00:23:8e:e1:6c:c8 (try 3)
> [  218.263514] wlan0: authentication with 00:23:8e:e1:6c:c8 timed out

> # iw wlan0 connect -w cloud
> [  276.603232] wlan0: authenticate with 00:23:8e:e1:6c:c8 (try 1)
> [  276.802003] wlan0: authenticate with 00:23:8e:e1:6c:c8 (try 2)
> [  277.001461] wlan0: authenticate with 00:23:8e:e1:6c:c8 (try 3)
> [  277.200945] wlan0: authentication with 00:23:8e:e1:6c:c8 timed out

Using "debug=0xe01" with rmmod/modprobe causes no visible difference.
"pcie_aspm=off" did not help.

`lspci -v` shows the device as:

> 
> 03:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
>         Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card
>         Flags: bus master, fast devsel, latency 0, IRQ 17
>         Memory at d2a00000 (64-bit, non-prefetchable) [size=64K]
>         Capabilities: [40] Power Management version 3
>         Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
>         Capabilities: [60] Express Legacy Endpoint, MSI 00
>         Capabilities: [100] Advanced Error Reporting
>         Capabilities: [140] Virtual Channel
>         Capabilities: [160] Device Serial Number 00-15-17-ff-ff-24-14-12
>         Capabilities: [170] Power Budgeting <?>
>         Kernel driver in use: ath9k

-- 
Mantas M. <grawity@gmail.com