Can not run Qemu with "runqemu qemux86 " after successful build on the Open Suse 12.1

Can not run Qemu with "runqemu qemux86 " after successful build on the Open Suse 12.1

[Ashish Pandey]

[-- Attachment #1: Type: text/plain, Size: 2403 bytes --]

Hi All ,

   I am getting one error and I am not able to launch Qemu, when I am trying to run Qemu after building the image.

Error :

yocto@linux-461v:~/poky-1.2_M4.rc1/build> runqemu qemux86

Continuing with the following parameters:
KERNEL: [/home/yocto/poky-1.2_M4.rc1/build/tmp/deploy/images/bzImage-qemux86.bin]
ROOTFS: [/home/yocto/poky-1.2_M4.rc1/build/tmp/deploy/images/core-image-sato-sdk-qemux86.ext3]
FSTYPE: [ext3]
Setting up tap interface under sudo
root's password:
Acquiring lockfile for tap0...
WARNING: distccd not present, no distcc support loaded.
Running qemu...
/home/yocto/poky-1.2_M4.rc1/build/tmp/sysroots/i686-linux/usr/bin/qemu -kernel /home/yocto/poky-1.2_M4.rc1/build/tmp/deploy/images/bzImage-qemux86.bin -net nic,vlan=0 -net tap,vlan=0,ifname=tap0,script=no,downscript=no -hda /home/yocto/poky-1.2_M4.rc1/build/tmp/deploy/images/core-image-sato-sdk-qemux86.ext3 -show-cursor -usb -usbdevice wacom-tablet -vga vmware -enable-gl -no-reboot -m 128 --append "vga=0 root=/dev/hda rw mem=128M ip=192.168.7.2::192.168.7.1:255.255.255.0 oprofile.timer=1 "
Enabling opengl
No protocol specified
No protocol specified
Could not initialize SDL(No available video device) - exiting
Set 'tap0' nonpersistent
Releasing lockfile of preconfigured tap device 'tap0'

This works fine is I use nographic option with runqemu "runqemu nographic qemux86".

Steps:

1) build Image with "bitbake core-image-sato-sdk" on "poky-1.2_M4.rc1".
2) Run Qemu. "runqemu qemux86"

Setup Detail :

1) Open Suse 12.1

yocto@linux-461v:~/poky-1.2_M4.rc1/build> uname -a
Linux linux-461v 3.1.0-1.2-desktop #1 SMP PREEMPT Thu Nov 3 14:45:45 UTC 2011 (187dde0) i686 i686 i386 GNU/Linux


I have checked X11 and SDL library , All library's are installed on the build Machine. Kindly help me to solve this problem.

Thanks & Regards,
Ashish



Regards,

Ashish

Huawei Technology



This e-mail and its attachments contain confidential information from HUAWEI, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!

[-- Attachment #2: Type: text/html, Size: 5244 bytes --]

Re: Can not run Qemu with "runqemu qemux86 " after successful build on the Open Suse 12.1

[Khem Raj]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 04/03/2012 11:32 PM, Ashish Pandey wrote:
> No protocol specified No protocol specified Could not initialize
> SDL(No available video device) - exiting

there are some GL packages that you might need IIRC for ubuntu and
fedora the runqemu script tries to inform about them but not for SuSE
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAk9/6BsACgkQuwUzVZGdMxSwmwCeLHwHwob9aOJcuD6Wbe/sNXLS
qNgAn2JKY+8G2BJV2V7B5qYOKMVPVJkR
=xq4h
-----END PGP SIGNATURE-----