Reconfiguring the kernel

Reconfiguring the kernel

[Chris Tapp]

I think this is a summary of the steps needed to reconfigure the kernel,based on the instructions in the 6.0.1 dev manual:

1) bitbake linux-yocto -c clean
2) bitbake linux-yocto -c menuconfig
3) bitbake linux-yocto -c compile -f
4) bitbake linux-yocto

However, the bzimage in tmp/deploy/images is the same as the one that I had before I executed the above. I'm not sure if the md5sum is the same (will check next time round the loop), but it certainly doesn't seem to pick up the new configuration that I'm generating within menuconfig.

If I use 'cleanall' in step 1 (as shown in the manual) then I do get a new image, but at the expense of having to download the kernel branch again (even with a DL_DIR set). Can I get away with just using 'clean' if I do something else as well ?

Chris Tapp

opensource@keylevel.com
www.keylevel.com

Re: Reconfiguring the kernel

[Bruce Ashfield]

On 12-04-10 04:40 PM, Chris Tapp wrote:
> I think this is a summary of the steps needed to reconfigure the kernel,based on the instructions in the 6.0.1 dev manual:
>
> 1) bitbake linux-yocto -c clean
> 2) bitbake linux-yocto -c menuconfig
> 3) bitbake linux-yocto -c compile -f
> 4) bitbake linux-yocto
>
> However, the bzimage in tmp/deploy/images is the same as the one that I had before I executed the above. I'm not sure if the md5sum is the same (will check next time round the loop), but it certainly doesn't seem to pick up the new configuration that I'm generating within menuconfig.
>
> If I use 'cleanall' in step 1 (as shown in the manual) then I do get a new image, but at the expense of having to download the kernel branch again (even with a DL_DIR set). Can I get away with just using 'clean' if I do something else as well ?

This is likely:

https://bugzilla.yoctoproject.org/show_bug.cgi?id=2256

Which is still pending resolution.

Cheers,

Bruce

>
> Chris Tapp
>
> opensource@keylevel.com
> www.keylevel.com
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Re: Reconfiguring the kernel

[Chris Tapp]

On 10 Apr 2012, at 21:50, Bruce Ashfield wrote:

> On 12-04-10 04:40 PM, Chris Tapp wrote:
>> I think this is a summary of the steps needed to reconfigure the kernel,based on the instructions in the 6.0.1 dev manual:
>> 
>> 1) bitbake linux-yocto -c clean
>> 2) bitbake linux-yocto -c menuconfig
>> 3) bitbake linux-yocto -c compile -f
>> 4) bitbake linux-yocto
>> 
>> However, the bzimage in tmp/deploy/images is the same as the one that I had before I executed the above. I'm not sure if the md5sum is the same (will check next time round the loop), but it certainly doesn't seem to pick up the new configuration that I'm generating within menuconfig.
>> 
>> If I use 'cleanall' in step 1 (as shown in the manual) then I do get a new image, but at the expense of having to download the kernel branch again (even with a DL_DIR set). Can I get away with just using 'clean' if I do something else as well ?
> 
> This is likely:
> 
> https://bugzilla.yoctoproject.org/show_bug.cgi?id=2256


Thanks, that seems to describe exactly what I'm seeing. Looks like I just need to be patient for a while longer ;-)

Chris Tapp

opensource@keylevel.com
www.keylevel.com

Re: Reconfiguring the kernel

[Bob Cochran]

On 04/10/2012 04:40 PM, Chris Tapp wrote:
> I think this is a summary of the steps needed to reconfigure the kernel,based on the instructions in the 6.0.1 dev manual:
>
> 1) bitbake linux-yocto -c clean
> 2) bitbake linux-yocto -c menuconfig
> 3) bitbake linux-yocto -c compile -f
> 4) bitbake linux-yocto
>
> However, the bzimage in tmp/deploy/images is the same as the one that I had before I executed the above. I'm not sure if the md5sum is the same (will check next time round the loop), but it certainly doesn't seem to pick up the new configuration that I'm generating within menuconfig.
>
> If I use 'cleanall' in step 1 (as shown in the manual) then I do get a new image, but at the expense of having to download the kernel branch again (even with a DL_DIR set). Can I get away with just using 'clean' if I do something else as well ?
>
> Chris Tapp
>


Chris,

Don't you find bzImage under your work directory 
(<machine>/tmp/work/<machine>-poky-linux/linux-yocto....) ?

I just gave your steps a spin with the beta release, and I do see that 
the image is missing in my deploy/images directory, but I do find it in 
my work directory.

I'm just pointing this out in case you're stuck wanting a new image to 
work with.

Bob

Re: Reconfiguring the kernel

[Chris Tapp]

On 10 Apr 2012, at 22:28, Bob Cochran wrote:

> On 04/10/2012 04:40 PM, Chris Tapp wrote:
>> I think this is a summary of the steps needed to reconfigure the kernel,based on the instructions in the 6.0.1 dev manual:
>> 
>> 1) bitbake linux-yocto -c clean
>> 2) bitbake linux-yocto -c menuconfig
>> 3) bitbake linux-yocto -c compile -f
>> 4) bitbake linux-yocto
>> 
>> However, the bzimage in tmp/deploy/images is the same as the one that I had before I executed the above. I'm not sure if the md5sum is the same (will check next time round the loop), but it certainly doesn't seem to pick up the new configuration that I'm generating within menuconfig.
>> 
>> If I use 'cleanall' in step 1 (as shown in the manual) then I do get a new image, but at the expense of having to download the kernel branch again (even with a DL_DIR set). Can I get away with just using 'clean' if I do something else as well ?
>> 
>> Chris Tapp
>> 
> 
> Chris,
> 
> Don't you find bzImage under your work directory (<machine>/tmp/work/<machine>-poky-linux/linux-yocto....) ?
> 
> I just gave your steps a spin with the beta release, and I do see that the image is missing in my deploy/images directory, but I do find it in my work directory.
> 
> I'm just pointing this out in case you're stuck wanting a new image to work with.


Thanks, I did see one there, but it had a date stamp that indicated it was from last Friday and a 'last accessed' date for today. This suggest that it came from sstate and wasn't generated as a result of the build.

I'm just about at the end of a rebuild after a 'cleanall', so I'll have a new image ready shortly. Will have to look at using a local git clone of the kernel so I don't have to wait 30+ minutes for the download to complete each time I build!

Chris Tapp

opensource@keylevel.com
www.keylevel.com