* Re: [lm-sensors] Need support IBM x3650
2012-04-16 12:29 [lm-sensors] Need support IBM x3650 Quang Minh
@ 2012-04-16 12:43 ` Jean Delvare
2012-04-16 12:56 ` Quang Minh
` (2 subsequent siblings)
3 siblings, 0 replies; 5+ messages in thread
From: Jean Delvare @ 2012-04-16 12:43 UTC (permalink / raw)
To: lm-sensors
On Mon, 16 Apr 2012 19:29:16 +0700, Quang Minh wrote:
> Hi all,
>
> I have a server IBM x3650 run CentOS. I want check temperature of server.
> I tried install lm_sensor, run sensors-detect then got error
> Sorry, no sensors were detected.
> Either your sensors are not supported, or they are connected to an
> I2C or SMBus adapter that is not supported. See doc/FAQ,
> doc/lm_sensors-FAQ.html or http://www.lm-sensors.org/wiki/FAQ
> (FAQ #4.24.3) for further information.
> If you find out what chips are on your board, check
> http://www.lm-sensors.org/wiki/Devices for driver status.
>
> Can you help me?
Not if you don't provide additional information:
* Which kernel are you running?
* Which version of lm-sensors?
Please also provide the full output of sensors-detect.
That being said, on high end servers monitoring is frequently done by
IPMI, which lm-sensors doesn't support, so the is a chance that
lm-sensors just won't work on this machine.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [lm-sensors] Need support IBM x3650
2012-04-16 12:29 [lm-sensors] Need support IBM x3650 Quang Minh
2012-04-16 12:43 ` Jean Delvare
@ 2012-04-16 12:56 ` Quang Minh
2012-04-16 14:27 ` Jean Delvare
2012-04-17 16:09 ` Darrick J. Wong
3 siblings, 0 replies; 5+ messages in thread
From: Quang Minh @ 2012-04-16 12:56 UTC (permalink / raw)
To: lm-sensors
[-- Attachment #1: Type: text/plain, Size: 1292 bytes --]
Thank for reply
here is information of server
Server running kernel 2.6.18-194.el5PAE
And i tried install lm-sensors 2.10.8
And output of sensor-detect in file attachment
Thanks again.
Ngày 4/16/2012 7:43 PM, Jean Delvare viết:
> On Mon, 16 Apr 2012 19:29:16 +0700, Quang Minh wrote:
>> Hi all,
>>
>> I have a server IBM x3650 run CentOS. I want check temperature of server.
>> I tried install lm_sensor, run sensors-detect then got error
>> Sorry, no sensors were detected.
>> Either your sensors are not supported, or they are connected to an
>> I2C or SMBus adapter that is not supported. See doc/FAQ,
>> doc/lm_sensors-FAQ.html or http://www.lm-sensors.org/wiki/FAQ
>> (FAQ #4.24.3) for further information.
>> If you find out what chips are on your board, check
>> http://www.lm-sensors.org/wiki/Devices for driver status.
>>
>> Can you help me?
> Not if you don't provide additional information:
> * Which kernel are you running?
> * Which version of lm-sensors?
>
> Please also provide the full output of sensors-detect.
>
> That being said, on high end servers monitoring is frequently done by
> IPMI, which lm-sensors doesn't support, so the is a chance that
> lm-sensors just won't work on this machine.
>
[-- Attachment #2: sensors-detect-output.txt --]
[-- Type: text/plain, Size: 6576 bytes --]
# sensors-detect revision 5291 (2008-06-23 23:40:46 -0700)
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
We can start with probing for (PCI) I2C or SMBus adapters.
Do you want to probe now? (YES/no):
Probing for PCI bus adapters...
Use driver `i2c-i801' for device 0000:00:1f.3: Intel ICH10
We will now try to load each adapter module in turn.
Module `i2c-i801' already loaded.
If you have undetectable or unsupported I2C/SMBus adapters, you can have
them scanned by manually loading the modules before running this script.
We are now going to do the I2C/SMBus adapter probings. Some chips may
be double detected; we choose the one with the highest confidence
value in that case.
If you found that the adapter hung after probing a certain address,
you can specify that address to remain unprobed.
Next adapter: SMBus I801 adapter at 2000 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x2e
Probing for `National Semiconductor LM78'... No
Probing for `National Semiconductor LM78-J'... No
Probing for `National Semiconductor LM79'... No
Probing for `National Semiconductor LM80'... No
Probing for `National Semiconductor LM85 or LM96000'... No
Probing for `Analog Devices ADM1027, ADT7460 or ADT7463'... No
Probing for `SMSC EMC6D100, EMC6D101 or EMC6D102'... No
Probing for `Analog Devices ADT7462'... No
Probing for `Analog Devices ADT7467 or ADT7468'... No
Probing for `Analog Devices ADT7470'... No
Probing for `Analog Devices ADT7473'... No
Probing for `Analog Devices ADT7475'... No
Probing for `Analog Devices ADT7476'... No
Probing for `Andigilog aSC7611'... No
Probing for `Andigilog aSC7621'... No
Probing for `National Semiconductor LM87'... No
Probing for `National Semiconductor LM93'... No
Probing for `Winbond W83781D'... No
Probing for `Winbond W83782D'... No
Probing for `Winbond W83792D'... No
Probing for `Winbond W83793R/G'... No
Probing for `Winbond W83791SD'... No
Probing for `Winbond W83627HF'... No
Probing for `Winbond W83627EHF'... No
Probing for `Winbond W83627DHG'... No
Probing for `Asus AS99127F (rev.1)'... No
Probing for `Asus AS99127F (rev.2)'... No
Probing for `Asus ASB100 Bach'... No
Probing for `Winbond W83L786NR/NG/R/G'... No
Probing for `Winbond W83L785TS-S'... No
Probing for `Analog Devices ADM9240'... No
Probing for `Dallas Semiconductor DS1780'... No
Probing for `National Semiconductor LM81'... No
Probing for `Analog Devices ADM1026'... No
Probing for `Analog Devices ADM1025'... No
Probing for `Analog Devices ADM1029'... No
Probing for `Analog Devices ADM1030'... No
Probing for `Analog Devices ADM1031'... No
Probing for `Analog Devices ADM1022'... No
Probing for `Texas Instruments THMC50'... No
Probing for `Analog Devices ADM1028'... No
Probing for `ITE IT8712F'... No
Probing for `SMSC DME1737'... No
Probing for `SMSC SCH5027D-NW'... No
Probing for `Fintek F75373S/SG'... No
Probing for `Fintek F75375S/SP'... No
Probing for `Fintek F75387SG/RG'... No
Probing for `Analog Devices ADM1024'... No
Probing for `Winbond W83791D'... No
Some chips are also accessible through the ISA I/O ports. We have to
write to arbitrary I/O ports to probe them. This is usually safe though.
Yes, you do have ISA I/O ports even if you do not have any ISA slots!
Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM78-J' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Some Super I/O chips may also contain sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Fintek'... No
Trying family `ITE'... No
Some south bridges, CPUs or memory controllers may also contain
embedded sensors. Do you want to scan for them? (YES/no):
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD K10 thermal sensors... No
Intel Core family thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
Sorry, no sensors were detected.
Either your sensors are not supported, or they are connected to an
I2C or SMBus adapter that is not supported. See doc/FAQ,
doc/lm_sensors-FAQ.html or http://www.lm-sensors.org/wiki/FAQ
(FAQ #4.24.3) for further information.
If you find out what chips are on your board, check
http://www.lm-sensors.org/wiki/Devices for driver status.
[-- Attachment #3: Type: text/plain, Size: 153 bytes --]
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [lm-sensors] Need support IBM x3650
2012-04-16 12:29 [lm-sensors] Need support IBM x3650 Quang Minh
2012-04-16 12:43 ` Jean Delvare
2012-04-16 12:56 ` Quang Minh
@ 2012-04-16 14:27 ` Jean Delvare
2012-04-17 16:09 ` Darrick J. Wong
3 siblings, 0 replies; 5+ messages in thread
From: Jean Delvare @ 2012-04-16 14:27 UTC (permalink / raw)
To: lm-sensors
Please don't top-post.
On Mon, 16 Apr 2012 19:56:58 +0700, Quang Minh wrote:
> Thank for reply
>
> here is information of server
> Server running kernel 2.6.18-194.el5PAE
This is horribly old.
> And i tried install lm-sensors 2.10.8
> And output of sensor-detect in file attachment
This is horribly old as well.
You can't run legacy low-level software on modern hardware and hope it
will be properly supported, sorry.
--
Jean Delvare
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [lm-sensors] Need support IBM x3650
2012-04-16 12:29 [lm-sensors] Need support IBM x3650 Quang Minh
` (2 preceding siblings ...)
2012-04-16 14:27 ` Jean Delvare
@ 2012-04-17 16:09 ` Darrick J. Wong
3 siblings, 0 replies; 5+ messages in thread
From: Darrick J. Wong @ 2012-04-17 16:09 UTC (permalink / raw)
To: lm-sensors
On Mon, Apr 16, 2012 at 02:43:19PM +0200, Jean Delvare wrote:
> On Mon, 16 Apr 2012 19:29:16 +0700, Quang Minh wrote:
> > Hi all,
> >
> > I have a server IBM x3650 run CentOS. I want check temperature of server.
> > I tried install lm_sensor, run sensors-detect then got error
> > Sorry, no sensors were detected.
> > Either your sensors are not supported, or they are connected to an
> > I2C or SMBus adapter that is not supported. See doc/FAQ,
> > doc/lm_sensors-FAQ.html or http://www.lm-sensors.org/wiki/FAQ
> > (FAQ #4.24.3) for further information.
> > If you find out what chips are on your board, check
> > http://www.lm-sensors.org/wiki/Devices for driver status.
> >
> > Can you help me?
>
> Not if you don't provide additional information:
> * Which kernel are you running?
> * Which version of lm-sensors?
>
> Please also provide the full output of sensors-detect.
>
> That being said, on high end servers monitoring is frequently done by
> IPMI, which lm-sensors doesn't support, so the is a chance that
> lm-sensors just won't work on this machine.
That is the case for a x3650. Please use IPMI to monitor sensors.
--D
>
> --
> Jean Delvare
>
> _______________________________________________
> lm-sensors mailing list
> lm-sensors@lm-sensors.org
> http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
>
_______________________________________________
lm-sensors mailing list
lm-sensors@lm-sensors.org
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors
^ permalink raw reply [flat|nested] 5+ messages in thread