* [U-Boot] [PATCH V2] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow [not found] <http://lists.denx.de/pipermail/u-boot/2012-March/#119232> @ 2012-04-16 17:12 ` Eric Nelson 2012-04-16 17:29 ` Marek Vasut 0 siblings, 1 reply; 3+ messages in thread From: Eric Nelson @ 2012-04-16 17:12 UTC (permalink / raw) To: u-boot Uses the 'magic_keys' idiom as described in doc/README.kbd: http://lists.denx.de/pipermail/u-boot/2012-April/122502.html Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> --- V2 based on suggestion by Wolfgang to follow prior implementations. board/freescale/mx6qsabrelite/mx6qsabrelite.c | 121 ++++++++++++++++++++++++- include/configs/mx6qsabrelite.h | 3 + 2 files changed, 122 insertions(+), 2 deletions(-) diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 1d09a72..9ca46e7 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -50,6 +50,10 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) +#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) + int dram_init(void) { gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); @@ -122,6 +126,22 @@ iomux_v3_cfg_t enet_pads2[] = { MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), }; +/* Button assignments for J14 */ +static iomux_v3_cfg_t button_pads[] = { + /* Menu */ + MX6Q_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Back */ + MX6Q_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Labelled Search (mapped to Power under Android) */ + MX6Q_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Home */ + MX6Q_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Volume Down */ + MX6Q_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), + /* Volume Up */ + MX6Q_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), +}; + static void setup_iomux_enet(void) { gpio_direction_output(87, 0); /* GPIO 3-23 */ @@ -267,11 +287,18 @@ int board_eth_init(bd_t *bis) return 0; } +static void setup_buttons(void) +{ + imx_iomux_v3_setup_multiple_pads(button_pads, + ARRAY_SIZE(button_pads)); +} + int board_early_init_f(void) { - setup_iomux_uart(); + setup_iomux_uart(); + setup_buttons(); - return 0; + return 0; } int board_init(void) @@ -292,3 +319,93 @@ int checkboard(void) return 0; } + +struct button_key { + char const *name; + unsigned gpnum; + char ident; +}; + +static struct button_key const buttons[] = { + {"back", GPIO_NUMBER(2, 2), 'B'}, + {"home", GPIO_NUMBER(2, 4), 'H'}, + {"menu", GPIO_NUMBER(2, 1), 'M'}, + {"search", GPIO_NUMBER(2, 3), 'S'}, + {"volup", GPIO_NUMBER(7, 13), 'V'}, + {"voldown", GPIO_NUMBER(4, 5), 'v'}, +}; + +/* + * generate a null-terminated string containing the buttons pressed + * returns number of keys pressed + */ +static int read_keys(char *buf) +{ + int i, numpressed = 0; + for (i = 0; i < ARRAY_SIZE(buttons); i++) { + if (0 == gpio_get_value(buttons[i].gpnum)) + buf[numpressed++] = buttons[i].ident; + } + buf[numpressed] = '\0' ; + return numpressed ; +} + +static int do_kbd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char envvalue[ARRAY_SIZE(buttons)+1]; + int numpressed = read_keys(envvalue); + setenv("keybd", envvalue); + return 0 == numpressed ; +} + +U_BOOT_CMD( + kbd, 1, 1, do_kbd, + "Tests for keypresses, sets 'keybd' environment variable", + "Returns 0 (true) to shell if key is pressed." +); + +#ifdef CONFIG_PREBOOT +static char const kbd_magic_prefix[] = "key_magic"; +static char const kbd_command_prefix[] = "key_cmd"; + +static void preboot_keys(void) +{ + int i, numpressed ; + char keypress[ARRAY_SIZE(buttons)+1]; + numpressed = read_keys(keypress); + if (0 != numpressed) { + char *kbd_magic_keys = getenv("magic_keys"); + char *suffix; + /* loop over all magic keys; + * use '\0' suffix in case of empty string + */ + for (suffix = kbd_magic_keys; *suffix ; ++suffix) { + char *keys ; + char magic[sizeof(kbd_magic_prefix) + 1]; + sprintf(magic, "%s%c", kbd_magic_prefix, *suffix); + keys = getenv(magic); + if (0 != keys) { + if (0 == strcmp(keys, keypress)) + break; + } + } + if (*suffix) { + char cmd_name[sizeof(kbd_command_prefix) + 1]; + char *cmd; + sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix); + cmd = getenv(cmd_name); + if (cmd) { + setenv("preboot", cmd); + return ; + } + } + } +} +#endif + +int misc_init_r(void) +{ +#ifdef CONFIG_PREBOOT + preboot_keys(); +#endif +} diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 8bc8a83..7bf8479 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -42,6 +42,7 @@ #define CONFIG_ARCH_CPU_INIT #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MISC_INIT_R #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART @@ -110,6 +111,8 @@ #define CONFIG_BOOTDELAY 3 +#define CONFIG_PREBOOT "" + #define CONFIG_LOADADDR 0x10800000 #define CONFIG_SYS_TEXT_BASE 0x17800000 -- 1.7.9 ^ permalink raw reply related [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH V2] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow 2012-04-16 17:12 ` [U-Boot] [PATCH V2] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Eric Nelson @ 2012-04-16 17:29 ` Marek Vasut 2012-04-16 19:28 ` Eric Nelson 0 siblings, 1 reply; 3+ messages in thread From: Marek Vasut @ 2012-04-16 17:29 UTC (permalink / raw) To: u-boot Dear Eric Nelson, > Uses the 'magic_keys' idiom as described in doc/README.kbd: > http://lists.denx.de/pipermail/u-boot/2012-April/122502.html > > Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> > --- > V2 based on suggestion by Wolfgang to follow prior implementations. > > board/freescale/mx6qsabrelite/mx6qsabrelite.c | 121 > ++++++++++++++++++++++++- include/configs/mx6qsabrelite.h | > 3 + > 2 files changed, 122 insertions(+), 2 deletions(-) > > diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c > b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 1d09a72..9ca46e7 > 100644 > --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c > +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c > @@ -50,6 +50,10 @@ DECLARE_GLOBAL_DATA_PTR; > PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \ > PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST) > > +#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \ > + PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \ > + PAD_CTL_DSE_40ohm | PAD_CTL_HYS) > + > int dram_init(void) > { > gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); > @@ -122,6 +126,22 @@ iomux_v3_cfg_t enet_pads2[] = { > MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), > }; > > +/* Button assignments for J14 */ > +static iomux_v3_cfg_t button_pads[] = { > + /* Menu */ > + MX6Q_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), > + /* Back */ > + MX6Q_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), > + /* Labelled Search (mapped to Power under Android) */ > + MX6Q_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), > + /* Home */ > + MX6Q_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), > + /* Volume Down */ > + MX6Q_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), > + /* Volume Up */ > + MX6Q_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL), > +}; > + > static void setup_iomux_enet(void) > { > gpio_direction_output(87, 0); /* GPIO 3-23 */ > @@ -267,11 +287,18 @@ int board_eth_init(bd_t *bis) > return 0; > } > > +static void setup_buttons(void) > +{ > + imx_iomux_v3_setup_multiple_pads(button_pads, > + ARRAY_SIZE(button_pads)); > +} > + > int board_early_init_f(void) > { > - setup_iomux_uart(); > + setup_iomux_uart(); > + setup_buttons(); > > - return 0; > + return 0; > } > > int board_init(void) > @@ -292,3 +319,93 @@ int checkboard(void) > > return 0; > } > + > +struct button_key { > + char const *name; > + unsigned gpnum; > + char ident; > +}; > + > +static struct button_key const buttons[] = { > + {"back", GPIO_NUMBER(2, 2), 'B'}, > + {"home", GPIO_NUMBER(2, 4), 'H'}, > + {"menu", GPIO_NUMBER(2, 1), 'M'}, > + {"search", GPIO_NUMBER(2, 3), 'S'}, > + {"volup", GPIO_NUMBER(7, 13), 'V'}, > + {"voldown", GPIO_NUMBER(4, 5), 'v'}, > +}; > + > +/* > + * generate a null-terminated string containing the buttons pressed > + * returns number of keys pressed > + */ > +static int read_keys(char *buf) > +{ > + int i, numpressed = 0; > + for (i = 0; i < ARRAY_SIZE(buttons); i++) { > + if (0 == gpio_get_value(buttons[i].gpnum)) > + buf[numpressed++] = buttons[i].ident; > + } > + buf[numpressed] = '\0' ; > + return numpressed ; Delete the space before semicolon please. > +} > + > +static int do_kbd(cmd_tbl_t *cmdtp, int flag, int argc, char * const > argv[]) +{ > + char envvalue[ARRAY_SIZE(buttons)+1]; > + int numpressed = read_keys(envvalue); > + setenv("keybd", envvalue); > + return 0 == numpressed ; Drop yoda condition > +} > + > +U_BOOT_CMD( > + kbd, 1, 1, do_kbd, > + "Tests for keypresses, sets 'keybd' environment variable", > + "Returns 0 (true) to shell if key is pressed." > +); > + > +#ifdef CONFIG_PREBOOT > +static char const kbd_magic_prefix[] = "key_magic"; > +static char const kbd_command_prefix[] = "key_cmd"; > + > +static void preboot_keys(void) > +{ > + int i, numpressed ; > + char keypress[ARRAY_SIZE(buttons)+1]; > + numpressed = read_keys(keypress); > + if (0 != numpressed) { Yoda ... > + char *kbd_magic_keys = getenv("magic_keys"); > + char *suffix; > + /* loop over all magic keys; Fix comment please? > + * use '\0' suffix in case of empty string > + */ > + for (suffix = kbd_magic_keys; *suffix ; ++suffix) { > + char *keys ; > + char magic[sizeof(kbd_magic_prefix) + 1]; > + sprintf(magic, "%s%c", kbd_magic_prefix, *suffix); > + keys = getenv(magic); > + if (0 != keys) { > + if (0 == strcmp(keys, keypress)) > + break; > + } > + } > + if (*suffix) { > + char cmd_name[sizeof(kbd_command_prefix) + 1]; > + char *cmd; > + sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix); > + cmd = getenv(cmd_name); > + if (cmd) { > + setenv("preboot", cmd); > + return ; > + } > + } > + } > +} > +#endif > + > +int misc_init_r(void) > +{ > +#ifdef CONFIG_PREBOOT > + preboot_keys(); > +#endif > +} > diff --git a/include/configs/mx6qsabrelite.h > b/include/configs/mx6qsabrelite.h index 8bc8a83..7bf8479 100644 > --- a/include/configs/mx6qsabrelite.h > +++ b/include/configs/mx6qsabrelite.h > @@ -42,6 +42,7 @@ > > #define CONFIG_ARCH_CPU_INIT > #define CONFIG_BOARD_EARLY_INIT_F > +#define CONFIG_MISC_INIT_R > #define CONFIG_MXC_GPIO > > #define CONFIG_MXC_UART > @@ -110,6 +111,8 @@ > > #define CONFIG_BOOTDELAY 3 > > +#define CONFIG_PREBOOT "" > + > #define CONFIG_LOADADDR 0x10800000 > #define CONFIG_SYS_TEXT_BASE 0x17800000 ^ permalink raw reply [flat|nested] 3+ messages in thread
* [U-Boot] [PATCH V2] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow 2012-04-16 17:29 ` Marek Vasut @ 2012-04-16 19:28 ` Eric Nelson 0 siblings, 0 replies; 3+ messages in thread From: Eric Nelson @ 2012-04-16 19:28 UTC (permalink / raw) To: u-boot Thanks for reviewing Marek, On 04/16/2012 10:29 AM, Marek Vasut wrote: > Dear Eric Nelson, > >> Uses the 'magic_keys' idiom as described in doc/README.kbd: >> http://lists.denx.de/pipermail/u-boot/2012-April/122502.html >> >> Signed-off-by: Eric Nelson<eric.nelson@boundarydevices.com> >> --- >> V2 based on suggestion by Wolfgang to follow prior implementations. >> >> board/freescale/mx6qsabrelite/mx6qsabrelite.c | 121 >> ++++++++++++++++++++++++- include/configs/mx6qsabrelite.h | >> 3 + >> 2 files changed, 122 insertions(+), 2 deletions(-) >> >> diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c >> b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 1d09a72..9ca46e7 >> >> <snip> >> >> + buf[numpressed] = '\0' ; >> + return numpressed ; > > Delete the space before semicolon please. > Okay, but is there a rule here somewhere? There are a bunch of other spots in this source that have space before semicolon. >> +} >> + >> +static int do_kbd(cmd_tbl_t *cmdtp, int flag, int argc, char * const >> argv[]) +{ >> + char envvalue[ARRAY_SIZE(buttons)+1]; >> + int numpressed = read_keys(envvalue); >> + setenv("keybd", envvalue); >> + return 0 == numpressed ; > > Drop yoda condition > Okay again, but are yoda conditionals verboten in U-Boot sources? I find that this style catches typos (inadvertent assignments). >> +} >> + >> >> <snip> >> >> +static void preboot_keys(void) >> +{ >> + int i, numpressed ; >> + char keypress[ARRAY_SIZE(buttons)+1]; >> + numpressed = read_keys(keypress); >> + if (0 != numpressed) { > > Yoda ... > Got it. I'm replacing some others as well. >> + char *kbd_magic_keys = getenv("magic_keys"); >> + char *suffix; >> + /* loop over all magic keys; > > Fix comment please? > V3 forthcoming. ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-04-16 19:28 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <http://lists.denx.de/pipermail/u-boot/2012-March/#119232>
2012-04-16 17:12 ` [U-Boot] [PATCH V2] i.MX6Q: mx6qsabrelite: Add keypress support to alter boot flow Eric Nelson
2012-04-16 17:29 ` Marek Vasut
2012-04-16 19:28 ` Eric Nelson
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.