From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
To: Simon Horman <horms@verge.net.au>
Cc: Grant Likely <grant.likely@secretlab.ca>,
spi-devel-general@lists.sourceforge.net,
SH-Linux <linux-sh@vger.kernel.org>
Subject: Re: [PATCH v2] spi: spi-rspi: add dmaengine supporting
Date: Fri, 20 Apr 2012 07:17:07 +0000 [thread overview]
Message-ID: <4F910D73.70809@renesas.com> (raw)
In-Reply-To: <20120420064038.GA24697@verge.net.au>
Hi Simon-san,
2012/04/20 15:40, Simon Horman wrote:
> On Fri, Apr 20, 2012 at 02:50:36PM +0900, Shimoda, Yoshihiro wrote:
>> This patch adds dmaengine supporting using sh_dma driver. The module
>> receives data by DMAC, it also needs TX DMAC to generate SPI's clocks.
>
> Hi Shimoda-san,
>
> could you let me know if it is possible to exercise this code
> on the sh7757lcr board and if so, how?
If you have an external SPI board for the sh7757lcr board,
you can exercise this code using the two additional patches.
1) sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757
http://marc.info/?l=linux-sh&m\x133482996807408&w=2
2) a temporal patch as the following
Best regards,
Yoshihiro Shimoda
---
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 24b1ee4..bb96070 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -324,6 +324,14 @@ static struct spi_board_info spi_board_info[] = {
.chip_select = 1,
.platform_data = &spi_flash_data,
},
+ {
+ /* for external SPI board */
+ .modalias = "m25p80",
+ .max_speed_hz = 25000000,
+ .bus_num = 2,
+ .chip_select = 0,
+ .platform_data = &spi_flash_data,
+ },
};
static int __init sh7757lcr_devices_setup(void)
@@ -558,6 +566,8 @@ static int __init sh7757lcr_devices_setup(void)
spi_register_board_info(spi_board_info,
ARRAY_SIZE(spi_board_info));
+ __raw_writel(0x40, 0xfe460000); /* DMAER1: enable RSPI */
+
/* General platform */
return platform_add_devices(sh7757lcr_devices,
ARRAY_SIZE(sh7757lcr_devices));
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index f807590..1ee3be5 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -18,6 +18,7 @@
#include <linux/dma-mapping.h>
#include <linux/sh_timer.h>
#include <linux/sh_dma.h>
+#include <linux/spi/rspi.h>
#include <cpu/dma-register.h>
#include <cpu/sh7757.h>
@@ -694,6 +695,12 @@ static struct platform_device spi1_device = {
.resource = spi1_resources,
};
+static struct rspi_plat_data rspi_platform_data = {
+ .dma_tx_id = SHDMA_SLAVE_RSPI_TX,
+ .dma_rx_id = SHDMA_SLAVE_RSPI_RX,
+ .dma_width_16bit = 1,
+};
+
static struct resource rspi_resources[] = {
{
.start = 0xfe480000,
@@ -709,6 +716,9 @@ static struct resource rspi_resources[] = {
static struct platform_device rspi_device = {
.name = "rspi",
.id = 2,
+ .dev = {
+ .platform_data = &rspi_platform_data,
+ },
.num_resources = ARRAY_SIZE(rspi_resources),
.resource = rspi_resources,
};
WARNING: multiple messages have this Message-ID (diff)
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
To: Simon Horman <horms@verge.net.au>
Cc: Grant Likely <grant.likely@secretlab.ca>,
spi-devel-general@lists.sourceforge.net,
SH-Linux <linux-sh@vger.kernel.org>
Subject: Re: [PATCH v2] spi: spi-rspi: add dmaengine supporting
Date: Fri, 20 Apr 2012 16:17:07 +0900 [thread overview]
Message-ID: <4F910D73.70809@renesas.com> (raw)
In-Reply-To: <20120420064038.GA24697@verge.net.au>
Hi Simon-san,
2012/04/20 15:40, Simon Horman wrote:
> On Fri, Apr 20, 2012 at 02:50:36PM +0900, Shimoda, Yoshihiro wrote:
>> This patch adds dmaengine supporting using sh_dma driver. The module
>> receives data by DMAC, it also needs TX DMAC to generate SPI's clocks.
>
> Hi Shimoda-san,
>
> could you let me know if it is possible to exercise this code
> on the sh7757lcr board and if so, how?
If you have an external SPI board for the sh7757lcr board,
you can exercise this code using the two additional patches.
1) sh: modify the sh_dmae_slave_config for RSPI in setup-sh7757
http://marc.info/?l=linux-sh&m=133482996807408&w=2
2) a temporal patch as the following
Best regards,
Yoshihiro Shimoda
---
diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c
index 24b1ee4..bb96070 100644
--- a/arch/sh/boards/board-sh7757lcr.c
+++ b/arch/sh/boards/board-sh7757lcr.c
@@ -324,6 +324,14 @@ static struct spi_board_info spi_board_info[] = {
.chip_select = 1,
.platform_data = &spi_flash_data,
},
+ {
+ /* for external SPI board */
+ .modalias = "m25p80",
+ .max_speed_hz = 25000000,
+ .bus_num = 2,
+ .chip_select = 0,
+ .platform_data = &spi_flash_data,
+ },
};
static int __init sh7757lcr_devices_setup(void)
@@ -558,6 +566,8 @@ static int __init sh7757lcr_devices_setup(void)
spi_register_board_info(spi_board_info,
ARRAY_SIZE(spi_board_info));
+ __raw_writel(0x40, 0xfe460000); /* DMAER1: enable RSPI */
+
/* General platform */
return platform_add_devices(sh7757lcr_devices,
ARRAY_SIZE(sh7757lcr_devices));
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
index f807590..1ee3be5 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7757.c
@@ -18,6 +18,7 @@
#include <linux/dma-mapping.h>
#include <linux/sh_timer.h>
#include <linux/sh_dma.h>
+#include <linux/spi/rspi.h>
#include <cpu/dma-register.h>
#include <cpu/sh7757.h>
@@ -694,6 +695,12 @@ static struct platform_device spi1_device = {
.resource = spi1_resources,
};
+static struct rspi_plat_data rspi_platform_data = {
+ .dma_tx_id = SHDMA_SLAVE_RSPI_TX,
+ .dma_rx_id = SHDMA_SLAVE_RSPI_RX,
+ .dma_width_16bit = 1,
+};
+
static struct resource rspi_resources[] = {
{
.start = 0xfe480000,
@@ -709,6 +716,9 @@ static struct resource rspi_resources[] = {
static struct platform_device rspi_device = {
.name = "rspi",
.id = 2,
+ .dev = {
+ .platform_data = &rspi_platform_data,
+ },
.num_resources = ARRAY_SIZE(rspi_resources),
.resource = rspi_resources,
};
next prev parent reply other threads:[~2012-04-20 7:17 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-20 5:50 [PATCH v2] spi: spi-rspi: add dmaengine supporting Shimoda, Yoshihiro
2012-04-20 5:50 ` Shimoda, Yoshihiro
2012-04-20 6:40 ` Simon Horman
2012-04-20 6:40 ` Simon Horman
2012-04-20 7:17 ` Shimoda, Yoshihiro [this message]
2012-04-20 7:17 ` Shimoda, Yoshihiro
2012-05-20 4:37 ` Grant Likely
2012-05-20 4:37 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4F910D73.70809@renesas.com \
--to=yoshihiro.shimoda.uh@renesas.com \
--cc=grant.likely@secretlab.ca \
--cc=horms@verge.net.au \
--cc=linux-sh@vger.kernel.org \
--cc=spi-devel-general@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.