* [PATCH NEXT]staging: rtl8192e: Fix typos.
@ 2012-04-23 14:36 Justin P. Mattock
2012-04-23 14:41 ` Larry Finger
0 siblings, 1 reply; 2+ messages in thread
From: Justin P. Mattock @ 2012-04-23 14:36 UTC (permalink / raw)
To: gregkh; +Cc: seanm, Larry.Finger, linux-kernel, devel, Justin P. Mattock
From: "Justin P. Mattock" <justinmattock@gmail.com>
Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
---
The below patch fixes some typos that I found while doing a little bit of reading in the
staging directory.
drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h | 4 +-
drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 2 +-
drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 2 +-
drivers/staging/rtl8192e/rtllib.h | 18 ++++++------
drivers/staging/rtl8192e/rtllib_rx.c | 4 +-
drivers/staging/rtl8192e/rtllib_softmac.c | 32 ++++++++++----------
drivers/staging/rtl8192e/rtllib_softmac_wx.c | 4 +-
drivers/staging/rtl8192e/rtllib_tx.c | 6 ++--
drivers/staging/rtl8192e/rtllib_wx.c | 2 +-
9 files changed, 37 insertions(+), 37 deletions(-)
diff --git a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
index d5de279..970298b 100644
--- a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
+++ b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
@@ -306,7 +306,7 @@
#define bRFStart 0x0000f000
#define bBBStart 0x000000f0
#define bBBCCKStart 0x0000000f
-/* Reg)x814 */
+/* Reg x814 */
#define bPAEnd 0xf
#define bTREnd 0x0f000000
#define bRFEnd 0x000f0000
@@ -844,7 +844,7 @@
#define bRTL8258_RxLPFBW 0xc00
#define bRTL8258_RSSILPFBW 0xc0
-/* byte endable for sb_write */
+/* byte enable for sb_write */
#define bByte0 0x1
#define bByte1 0x2
#define bByte2 0x4
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
index 7c676c2..97a5f49 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
@@ -1025,7 +1025,7 @@ static int rtl8192_sta_down(struct net_device *dev, bool shutdownrf)
break;
}
RT_TRACE(COMP_DBG, "===>%s():RF is in progress, need to wait "
- "until rf chang is done.\n", __func__);
+ "until rf change is done.\n", __func__);
mdelay(1);
RFInProgressTimeOut++;
spin_lock_irqsave(&priv->rf_ps_lock, flags);
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
index f026b71..2dfb0f0 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
@@ -493,7 +493,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
if (priv->bResetInProgress) {
RT_TRACE(COMP_POWER_TRACKING,
- "we are in slient reset progress, so return\n");
+ "we are in silent reset progress, so return\n");
write_nic_byte(dev, Pw_Track_Flag, 0);
write_nic_byte(dev, FW_Busy_Flag, 0);
return;
diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
index e26aec8..d7460ae 100644
--- a/drivers/staging/rtl8192e/rtllib.h
+++ b/drivers/staging/rtl8192e/rtllib.h
@@ -169,7 +169,7 @@ struct cb_desc {
u8 nStuckCount;
- /* Tx Firmware Relaged flags (10-11)*/
+ /* Tx Firmware Related flags (10-11)*/
u8 bCTSEnable:1;
u8 bRTSEnable:1;
u8 bUseShortGI:1;
@@ -1690,7 +1690,7 @@ enum rtllib_state {
/* the association procedure is sending AUTH request*/
RTLLIB_ASSOCIATING_AUTHENTICATING,
- /* the association procedure has successfully authentcated
+ /* the association procedure has successfully authenticated
* and is sending association request
*/
RTLLIB_ASSOCIATING_AUTHENTICATED,
@@ -2409,7 +2409,7 @@ struct rtllib_device {
/* used instead of hard_start_xmit (not softmac_hard_start_xmit)
* if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
- * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
+ * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
* then also management frames are sent via this callback.
* This function can't sleep.
*/
@@ -2422,12 +2422,12 @@ struct rtllib_device {
*/
void (*data_hard_stop)(struct net_device *dev);
- /* OK this is complementar to data_poll_hard_stop */
+ /* OK this is complementing to data_poll_hard_stop */
void (*data_hard_resume)(struct net_device *dev);
/* ask to the driver to retune the radio .
* This function can sleep. the driver should ensure
- * the radio has been swithced before return.
+ * the radio has been switched before return.
*/
void (*set_chan)(struct net_device *dev, short ch);
@@ -2438,7 +2438,7 @@ struct rtllib_device {
* The syncro version is similar to the start_scan but
* does not return until all channels has been scanned.
* this is called in user context and should sleep,
- * it is called in a work_queue when swithcing to ad-hoc mode
+ * it is called in a work_queue when switching to ad-hoc mode
* or in behalf of iwlist scan when the card is associated
* and root user ask for a scan.
* the fucntion stop_scan should stop both the syncro and
@@ -2481,7 +2481,7 @@ struct rtllib_device {
struct rtllib_network *network);
- /* check whether Tx hw resouce available */
+ /* check whether Tx hw resource available */
short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
short (*get_nic_desc_num)(struct net_device *dev, int queue_index);
void (*SetBWModeHandler)(struct net_device *dev,
@@ -2543,10 +2543,10 @@ struct rtllib_device {
/* Generate probe requests */
#define IEEE_SOFTMAC_PROBERQ (1<<4)
-/* Generate respones to probe requests */
+/* Generate response to probe requests */
#define IEEE_SOFTMAC_PROBERS (1<<5)
-/* The ieee802.11 stack will manages the netif queue
+/* The ieee802.11 stack will manage the netif queue
* wake/stop for the driver, taking care of 802.11
* fragmentation. See softmac.c for details. */
#define IEEE_SOFTMAC_TX_QUEUE (1<<7)
diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
index 13979b5..40a59c9 100644
--- a/drivers/staging/rtl8192e/rtllib_rx.c
+++ b/drivers/staging/rtl8192e/rtllib_rx.c
@@ -496,7 +496,7 @@ void rtllib_indicate_packets(struct rtllib_device *ieee, struct rtllib_rxb **prx
memcpy(skb_push(sub_skb, ETH_ALEN), prxb->dst, ETH_ALEN);
}
- /* Indicat the packets to upper layer */
+ /* Indicate the packets to upper layer */
if (sub_skb) {
stats->rx_packets++;
stats->rx_bytes += sub_skb->len;
@@ -1233,7 +1233,7 @@ static void rtllib_rx_indicate_pkt_legacy(struct rtllib_device *ieee,
if (is_multicast_ether_addr(dst))
ieee->stats.multicast++;
- /* Indicat the packets to upper layer */
+ /* Indicate the packets to upper layer */
memset(sub_skb->cb, 0, sizeof(sub_skb->cb));
sub_skb->protocol = eth_type_trans(sub_skb, dev);
sub_skb->dev = dev;
diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c
index c5a15db..236477d 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac.c
@@ -31,7 +31,7 @@ short rtllib_is_shortslot(const struct rtllib_network *net)
return net->capability & WLAN_CAPABILITY_SHORT_SLOT_TIME;
}
-/* returns the total length needed for pleacing the RATE MFIE
+/* returns the total length needed for placing the RATE MFIE
* tag and the EXTENDED RATE MFIE tag if needed.
* It encludes two bytes per tag for the tag itself and its len
*/
@@ -49,7 +49,7 @@ static unsigned int rtllib_MFIE_rate_len(struct rtllib_device *ieee)
return rate_len;
}
-/* pleace the MFIE rate, tag to the memory (double) poined.
+/* place the MFIE rate, tag to the memory (double) pointed.
* Then it updates the pointer so that
* it points after the new MFIE tag added.
*/
@@ -557,7 +557,7 @@ void rtllib_softmac_scan_syncro(struct rtllib_device *ieee, u8 is_mesh)
* new network events, despite for updating the net list,
* but we are temporarly 'unlinked' as the driver shall
* not filter RX frames and the channel is changing.
- * So the only situation in witch are interested is to check
+ * So the only situation in which are interested is to check
* if the state become LINKED because of the #1 situation
*/
@@ -1681,7 +1681,7 @@ inline void rtllib_softmac_new_net(struct rtllib_device *ieee,
/* if the user set the AP check if match.
* if the network does not broadcast essid we check the
- * user supplyed ANY essid
+ * user supplied ANY essid
* if the network does broadcast and the user does not set
* essid it is OK
* if the network does broadcast and the user did set essid
@@ -2444,16 +2444,16 @@ inline int rtllib_rx_frame_softmac(struct rtllib_device *ieee,
/* following are for a simplier TX queue management.
* Instead of using netif_[stop/wake]_queue the driver
- * will uses these two function (plus a reset one), that
- * will internally uses the kernel netif_* and takes
+ * will use these two functions (plus a reset one), that
+ * will internally use the kernel netif_* and takes
* care of the ieee802.11 fragmentation.
* So the driver receives a fragment per time and might
- * call the stop function when it want without take care
- * to have enought room to TX an entire packet.
- * This might be useful if each fragment need it's own
+ * call the stop function when it wants to not
+ * have enough room to TX an entire packet.
+ * This might be useful if each fragment needs it's own
* descriptor, thus just keep a total free memory > than
- * the max fragmentation treshold is not enought.. If the
- * ieee802.11 stack passed a TXB struct then you needed
+ * the max fragmentation threshold is not enough.. If the
+ * ieee802.11 stack passed a TXB struct then you need
* to keep N free descriptors where
* N = MAX_PACKET_SIZE / MIN_FRAG_TRESHOLD
* In this way you need just one and the 802.11 stack
@@ -2696,15 +2696,15 @@ static void rtllib_start_ibss_wq(void *data)
rtllib_softmac_check_all_nets(ieee);
- /* if not then the state is not linked. Maybe the user swithced to
+ /* if not then the state is not linked. Maybe the user switched to
* ad-hoc mode just after being in monitor mode, or just after
* being very few time in managed mode (so the card have had no
* time to scan all the chans..) or we have just run up the iface
* after setting ad-hoc mode. So we have to give another try..
* Here, in ibss mode, should be safe to do this without extra care
- * (in bss mode we had to make sure no-one tryed to associate when
+ * (in bss mode we had to make sure no-one tried to associate when
* we had just checked the ieee->state and we was going to start the
- * scan) beacause in ibss mode the rtllib_new_net function, when
+ * scan) because in ibss mode the rtllib_new_net function, when
* finds a good net, just set the ieee->state to RTLLIB_LINKED,
* so, at worst, we waste a bit of time to initiate an unneeded syncro
* scan, that will stop at the first round because it sees the state
@@ -2819,7 +2819,7 @@ void rtllib_start_bss(struct rtllib_device *ieee)
/* ensure no-one start an associating process (thus setting
* the ieee->state to rtllib_ASSOCIATING) while we
- * have just cheked it and we are going to enable scan.
+ * have just checked it and we are going to enable scan.
* The rtllib_new_net function is always called with
* lock held (from both rtllib_softmac_check_all_nets and
* the rx path), so we cannot be in the middle of such function
@@ -2872,7 +2872,7 @@ static void rtllib_associate_retry_wq(void *data)
/* until we do not set the state to RTLLIB_NOLINK
* there are no possibility to have someone else trying
- * to start an association procdure (we get here with
+ * to start an association procedure (we get here with
* ieee->state = RTLLIB_ASSOCIATING).
* When we set the state to RTLLIB_NOLINK it is possible
* that the RX path run an attempt to associate, but
diff --git a/drivers/staging/rtl8192e/rtllib_softmac_wx.c b/drivers/staging/rtl8192e/rtllib_softmac_wx.c
index 1523bc7..1bb6b52 100644
--- a/drivers/staging/rtl8192e/rtllib_softmac_wx.c
+++ b/drivers/staging/rtl8192e/rtllib_softmac_wx.c
@@ -479,7 +479,7 @@ int rtllib_wx_set_essid(struct rtllib_device *ieee,
/* this is just to be sure that the GET wx callback
- * has consisten infos. not needed otherwise
+ * has consistent infos. not needed otherwise
*/
spin_lock_irqsave(&ieee->lock, flags);
@@ -575,7 +575,7 @@ int rtllib_wx_set_power(struct rtllib_device *ieee,
if ((!ieee->sta_wake_up) ||
(!ieee->enter_sleep_state) ||
(!ieee->ps_is_queue_empty)) {
- RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tryied to be use "
+ RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tried to be use "
"but driver missed a callback\n\n", __func__);
return -1;
}
diff --git a/drivers/staging/rtl8192e/rtllib_tx.c b/drivers/staging/rtl8192e/rtllib_tx.c
index f451bfc..f24aa00c 100644
--- a/drivers/staging/rtl8192e/rtllib_tx.c
+++ b/drivers/staging/rtl8192e/rtllib_tx.c
@@ -59,7 +59,7 @@
802.11 Data Frame
-802.11 frame_contorl for data frames - 2 bytes
+802.11 frame_control for data frames - 2 bytes
,-----------------------------------------------------------------------------------------.
bits | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e |
|----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
@@ -576,7 +576,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev)
spin_lock_irqsave(&ieee->lock, flags);
- /* If there is no driver handler to take the TXB, dont' bother
+ /* If there is no driver handler to take the TXB, don't bother
* creating it... */
if ((!ieee->hard_start_xmit && !(ieee->softmac_features &
IEEE_SOFTMAC_TX_QUEUE)) ||
@@ -738,7 +738,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev)
(CFG_RTLLIB_COMPUTE_FCS | CFG_RTLLIB_RESERVE_FCS))
bytes_per_frag -= RTLLIB_FCS_LEN;
- /* Each fragment may need to have room for encryptiong
+ /* Each fragment may need to have room for encrypting
* pre/postfix */
if (encrypt) {
bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
diff --git a/drivers/staging/rtl8192e/rtllib_wx.c b/drivers/staging/rtl8192e/rtllib_wx.c
index e5fe2e8..c7e8d4d8 100644
--- a/drivers/staging/rtl8192e/rtllib_wx.c
+++ b/drivers/staging/rtl8192e/rtllib_wx.c
@@ -408,7 +408,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,
(*crypt)->priv);
sec.flags |= (1 << key);
/* This ensures a key will be activated if no key is
- * explicitely set */
+ * explicitly set */
if (key == sec.active_key)
sec.flags |= SEC_ACTIVE_KEY;
ieee->crypt_info.tx_keyidx = key;
--
1.7.5.4
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH NEXT]staging: rtl8192e: Fix typos.
2012-04-23 14:36 [PATCH NEXT]staging: rtl8192e: Fix typos Justin P. Mattock
@ 2012-04-23 14:41 ` Larry Finger
0 siblings, 0 replies; 2+ messages in thread
From: Larry Finger @ 2012-04-23 14:41 UTC (permalink / raw)
To: Justin P. Mattock; +Cc: gregkh, seanm, linux-kernel, devel
On 04/23/2012 09:36 AM, Justin P. Mattock wrote:
> From: "Justin P. Mattock"<justinmattock@gmail.com>
>
> Signed-off-by: Justin P. Mattock<justinmattock@gmail.com>
>
> ---
>
> The below patch fixes some typos that I found while doing a little bit of reading in the
> staging directory.
ACKed-by: Larry Finger <Larry.finger@lwfinger.net>
Larry
>
> drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h | 4 +-
> drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 2 +-
> drivers/staging/rtl8192e/rtl8192e/rtl_dm.c | 2 +-
> drivers/staging/rtl8192e/rtllib.h | 18 ++++++------
> drivers/staging/rtl8192e/rtllib_rx.c | 4 +-
> drivers/staging/rtl8192e/rtllib_softmac.c | 32 ++++++++++----------
> drivers/staging/rtl8192e/rtllib_softmac_wx.c | 4 +-
> drivers/staging/rtl8192e/rtllib_tx.c | 6 ++--
> drivers/staging/rtl8192e/rtllib_wx.c | 2 +-
> 9 files changed, 37 insertions(+), 37 deletions(-)
>
> diff --git a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
> index d5de279..970298b 100644
> --- a/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
> +++ b/drivers/staging/rtl8192e/rtl8192e/r819xE_phyreg.h
> @@ -306,7 +306,7 @@
> #define bRFStart 0x0000f000
> #define bBBStart 0x000000f0
> #define bBBCCKStart 0x0000000f
> -/* Reg)x814 */
> +/* Reg x814 */
> #define bPAEnd 0xf
> #define bTREnd 0x0f000000
> #define bRFEnd 0x000f0000
> @@ -844,7 +844,7 @@
> #define bRTL8258_RxLPFBW 0xc00
> #define bRTL8258_RSSILPFBW 0xc0
>
> -/* byte endable for sb_write */
> +/* byte enable for sb_write */
> #define bByte0 0x1
> #define bByte1 0x2
> #define bByte2 0x4
> diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
> index 7c676c2..97a5f49 100644
> --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
> +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c
> @@ -1025,7 +1025,7 @@ static int rtl8192_sta_down(struct net_device *dev, bool shutdownrf)
> break;
> }
> RT_TRACE(COMP_DBG, "===>%s():RF is in progress, need to wait "
> - "until rf chang is done.\n", __func__);
> + "until rf change is done.\n", __func__);
> mdelay(1);
> RFInProgressTimeOut++;
> spin_lock_irqsave(&priv->rf_ps_lock, flags);
> diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
> index f026b71..2dfb0f0 100644
> --- a/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
> +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_dm.c
> @@ -493,7 +493,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)
>
> if (priv->bResetInProgress) {
> RT_TRACE(COMP_POWER_TRACKING,
> - "we are in slient reset progress, so return\n");
> + "we are in silent reset progress, so return\n");
> write_nic_byte(dev, Pw_Track_Flag, 0);
> write_nic_byte(dev, FW_Busy_Flag, 0);
> return;
> diff --git a/drivers/staging/rtl8192e/rtllib.h b/drivers/staging/rtl8192e/rtllib.h
> index e26aec8..d7460ae 100644
> --- a/drivers/staging/rtl8192e/rtllib.h
> +++ b/drivers/staging/rtl8192e/rtllib.h
> @@ -169,7 +169,7 @@ struct cb_desc {
>
> u8 nStuckCount;
>
> - /* Tx Firmware Relaged flags (10-11)*/
> + /* Tx Firmware Related flags (10-11)*/
> u8 bCTSEnable:1;
> u8 bRTSEnable:1;
> u8 bUseShortGI:1;
> @@ -1690,7 +1690,7 @@ enum rtllib_state {
> /* the association procedure is sending AUTH request*/
> RTLLIB_ASSOCIATING_AUTHENTICATING,
>
> - /* the association procedure has successfully authentcated
> + /* the association procedure has successfully authenticated
> * and is sending association request
> */
> RTLLIB_ASSOCIATING_AUTHENTICATED,
> @@ -2409,7 +2409,7 @@ struct rtllib_device {
>
> /* used instead of hard_start_xmit (not softmac_hard_start_xmit)
> * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
> - * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
> + * frames. If the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
> * then also management frames are sent via this callback.
> * This function can't sleep.
> */
> @@ -2422,12 +2422,12 @@ struct rtllib_device {
> */
> void (*data_hard_stop)(struct net_device *dev);
>
> - /* OK this is complementar to data_poll_hard_stop */
> + /* OK this is complementing to data_poll_hard_stop */
> void (*data_hard_resume)(struct net_device *dev);
>
> /* ask to the driver to retune the radio .
> * This function can sleep. the driver should ensure
> - * the radio has been swithced before return.
> + * the radio has been switched before return.
> */
> void (*set_chan)(struct net_device *dev, short ch);
>
> @@ -2438,7 +2438,7 @@ struct rtllib_device {
> * The syncro version is similar to the start_scan but
> * does not return until all channels has been scanned.
> * this is called in user context and should sleep,
> - * it is called in a work_queue when swithcing to ad-hoc mode
> + * it is called in a work_queue when switching to ad-hoc mode
> * or in behalf of iwlist scan when the card is associated
> * and root user ask for a scan.
> * the fucntion stop_scan should stop both the syncro and
> @@ -2481,7 +2481,7 @@ struct rtllib_device {
> struct rtllib_network *network);
>
>
> - /* check whether Tx hw resouce available */
> + /* check whether Tx hw resource available */
> short (*check_nic_enough_desc)(struct net_device *dev, int queue_index);
> short (*get_nic_desc_num)(struct net_device *dev, int queue_index);
> void (*SetBWModeHandler)(struct net_device *dev,
> @@ -2543,10 +2543,10 @@ struct rtllib_device {
> /* Generate probe requests */
> #define IEEE_SOFTMAC_PROBERQ (1<<4)
>
> -/* Generate respones to probe requests */
> +/* Generate response to probe requests */
> #define IEEE_SOFTMAC_PROBERS (1<<5)
>
> -/* The ieee802.11 stack will manages the netif queue
> +/* The ieee802.11 stack will manage the netif queue
> * wake/stop for the driver, taking care of 802.11
> * fragmentation. See softmac.c for details. */
> #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
> diff --git a/drivers/staging/rtl8192e/rtllib_rx.c b/drivers/staging/rtl8192e/rtllib_rx.c
> index 13979b5..40a59c9 100644
> --- a/drivers/staging/rtl8192e/rtllib_rx.c
> +++ b/drivers/staging/rtl8192e/rtllib_rx.c
> @@ -496,7 +496,7 @@ void rtllib_indicate_packets(struct rtllib_device *ieee, struct rtllib_rxb **prx
> memcpy(skb_push(sub_skb, ETH_ALEN), prxb->dst, ETH_ALEN);
> }
>
> - /* Indicat the packets to upper layer */
> + /* Indicate the packets to upper layer */
> if (sub_skb) {
> stats->rx_packets++;
> stats->rx_bytes += sub_skb->len;
> @@ -1233,7 +1233,7 @@ static void rtllib_rx_indicate_pkt_legacy(struct rtllib_device *ieee,
> if (is_multicast_ether_addr(dst))
> ieee->stats.multicast++;
>
> - /* Indicat the packets to upper layer */
> + /* Indicate the packets to upper layer */
> memset(sub_skb->cb, 0, sizeof(sub_skb->cb));
> sub_skb->protocol = eth_type_trans(sub_skb, dev);
> sub_skb->dev = dev;
> diff --git a/drivers/staging/rtl8192e/rtllib_softmac.c b/drivers/staging/rtl8192e/rtllib_softmac.c
> index c5a15db..236477d 100644
> --- a/drivers/staging/rtl8192e/rtllib_softmac.c
> +++ b/drivers/staging/rtl8192e/rtllib_softmac.c
> @@ -31,7 +31,7 @@ short rtllib_is_shortslot(const struct rtllib_network *net)
> return net->capability& WLAN_CAPABILITY_SHORT_SLOT_TIME;
> }
>
> -/* returns the total length needed for pleacing the RATE MFIE
> +/* returns the total length needed for placing the RATE MFIE
> * tag and the EXTENDED RATE MFIE tag if needed.
> * It encludes two bytes per tag for the tag itself and its len
> */
> @@ -49,7 +49,7 @@ static unsigned int rtllib_MFIE_rate_len(struct rtllib_device *ieee)
> return rate_len;
> }
>
> -/* pleace the MFIE rate, tag to the memory (double) poined.
> +/* place the MFIE rate, tag to the memory (double) pointed.
> * Then it updates the pointer so that
> * it points after the new MFIE tag added.
> */
> @@ -557,7 +557,7 @@ void rtllib_softmac_scan_syncro(struct rtllib_device *ieee, u8 is_mesh)
> * new network events, despite for updating the net list,
> * but we are temporarly 'unlinked' as the driver shall
> * not filter RX frames and the channel is changing.
> - * So the only situation in witch are interested is to check
> + * So the only situation in which are interested is to check
> * if the state become LINKED because of the #1 situation
> */
>
> @@ -1681,7 +1681,7 @@ inline void rtllib_softmac_new_net(struct rtllib_device *ieee,
>
> /* if the user set the AP check if match.
> * if the network does not broadcast essid we check the
> - * user supplyed ANY essid
> + * user supplied ANY essid
> * if the network does broadcast and the user does not set
> * essid it is OK
> * if the network does broadcast and the user did set essid
> @@ -2444,16 +2444,16 @@ inline int rtllib_rx_frame_softmac(struct rtllib_device *ieee,
>
> /* following are for a simplier TX queue management.
> * Instead of using netif_[stop/wake]_queue the driver
> - * will uses these two function (plus a reset one), that
> - * will internally uses the kernel netif_* and takes
> + * will use these two functions (plus a reset one), that
> + * will internally use the kernel netif_* and takes
> * care of the ieee802.11 fragmentation.
> * So the driver receives a fragment per time and might
> - * call the stop function when it want without take care
> - * to have enought room to TX an entire packet.
> - * This might be useful if each fragment need it's own
> + * call the stop function when it wants to not
> + * have enough room to TX an entire packet.
> + * This might be useful if each fragment needs it's own
> * descriptor, thus just keep a total free memory> than
> - * the max fragmentation treshold is not enought.. If the
> - * ieee802.11 stack passed a TXB struct then you needed
> + * the max fragmentation threshold is not enough.. If the
> + * ieee802.11 stack passed a TXB struct then you need
> * to keep N free descriptors where
> * N = MAX_PACKET_SIZE / MIN_FRAG_TRESHOLD
> * In this way you need just one and the 802.11 stack
> @@ -2696,15 +2696,15 @@ static void rtllib_start_ibss_wq(void *data)
> rtllib_softmac_check_all_nets(ieee);
>
>
> - /* if not then the state is not linked. Maybe the user swithced to
> + /* if not then the state is not linked. Maybe the user switched to
> * ad-hoc mode just after being in monitor mode, or just after
> * being very few time in managed mode (so the card have had no
> * time to scan all the chans..) or we have just run up the iface
> * after setting ad-hoc mode. So we have to give another try..
> * Here, in ibss mode, should be safe to do this without extra care
> - * (in bss mode we had to make sure no-one tryed to associate when
> + * (in bss mode we had to make sure no-one tried to associate when
> * we had just checked the ieee->state and we was going to start the
> - * scan) beacause in ibss mode the rtllib_new_net function, when
> + * scan) because in ibss mode the rtllib_new_net function, when
> * finds a good net, just set the ieee->state to RTLLIB_LINKED,
> * so, at worst, we waste a bit of time to initiate an unneeded syncro
> * scan, that will stop at the first round because it sees the state
> @@ -2819,7 +2819,7 @@ void rtllib_start_bss(struct rtllib_device *ieee)
>
> /* ensure no-one start an associating process (thus setting
> * the ieee->state to rtllib_ASSOCIATING) while we
> - * have just cheked it and we are going to enable scan.
> + * have just checked it and we are going to enable scan.
> * The rtllib_new_net function is always called with
> * lock held (from both rtllib_softmac_check_all_nets and
> * the rx path), so we cannot be in the middle of such function
> @@ -2872,7 +2872,7 @@ static void rtllib_associate_retry_wq(void *data)
>
> /* until we do not set the state to RTLLIB_NOLINK
> * there are no possibility to have someone else trying
> - * to start an association procdure (we get here with
> + * to start an association procedure (we get here with
> * ieee->state = RTLLIB_ASSOCIATING).
> * When we set the state to RTLLIB_NOLINK it is possible
> * that the RX path run an attempt to associate, but
> diff --git a/drivers/staging/rtl8192e/rtllib_softmac_wx.c b/drivers/staging/rtl8192e/rtllib_softmac_wx.c
> index 1523bc7..1bb6b52 100644
> --- a/drivers/staging/rtl8192e/rtllib_softmac_wx.c
> +++ b/drivers/staging/rtl8192e/rtllib_softmac_wx.c
> @@ -479,7 +479,7 @@ int rtllib_wx_set_essid(struct rtllib_device *ieee,
>
>
> /* this is just to be sure that the GET wx callback
> - * has consisten infos. not needed otherwise
> + * has consistent infos. not needed otherwise
> */
> spin_lock_irqsave(&ieee->lock, flags);
>
> @@ -575,7 +575,7 @@ int rtllib_wx_set_power(struct rtllib_device *ieee,
> if ((!ieee->sta_wake_up) ||
> (!ieee->enter_sleep_state) ||
> (!ieee->ps_is_queue_empty)) {
> - RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tryied to be use "
> + RTLLIB_DEBUG(RTLLIB_DL_ERR, "%s(): PS mode is tried to be use "
> "but driver missed a callback\n\n", __func__);
> return -1;
> }
> diff --git a/drivers/staging/rtl8192e/rtllib_tx.c b/drivers/staging/rtl8192e/rtllib_tx.c
> index f451bfc..f24aa00c 100644
> --- a/drivers/staging/rtl8192e/rtllib_tx.c
> +++ b/drivers/staging/rtl8192e/rtllib_tx.c
> @@ -59,7 +59,7 @@
> 802.11 Data Frame
>
>
> -802.11 frame_contorl for data frames - 2 bytes
> +802.11 frame_control for data frames - 2 bytes
> ,-----------------------------------------------------------------------------------------.
> bits | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | a | b | c | d | e |
> |----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|-----|------|
> @@ -576,7 +576,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev)
>
> spin_lock_irqsave(&ieee->lock, flags);
>
> - /* If there is no driver handler to take the TXB, dont' bother
> + /* If there is no driver handler to take the TXB, don't bother
> * creating it... */
> if ((!ieee->hard_start_xmit&& !(ieee->softmac_features&
> IEEE_SOFTMAC_TX_QUEUE)) ||
> @@ -738,7 +738,7 @@ int rtllib_xmit_inter(struct sk_buff *skb, struct net_device *dev)
> (CFG_RTLLIB_COMPUTE_FCS | CFG_RTLLIB_RESERVE_FCS))
> bytes_per_frag -= RTLLIB_FCS_LEN;
>
> - /* Each fragment may need to have room for encryptiong
> + /* Each fragment may need to have room for encrypting
> * pre/postfix */
> if (encrypt) {
> bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len +
> diff --git a/drivers/staging/rtl8192e/rtllib_wx.c b/drivers/staging/rtl8192e/rtllib_wx.c
> index e5fe2e8..c7e8d4d8 100644
> --- a/drivers/staging/rtl8192e/rtllib_wx.c
> +++ b/drivers/staging/rtl8192e/rtllib_wx.c
> @@ -408,7 +408,7 @@ int rtllib_wx_set_encode(struct rtllib_device *ieee,
> (*crypt)->priv);
> sec.flags |= (1<< key);
> /* This ensures a key will be activated if no key is
> - * explicitely set */
> + * explicitly set */
> if (key == sec.active_key)
> sec.flags |= SEC_ACTIVE_KEY;
> ieee->crypt_info.tx_keyidx = key;
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2012-04-23 14:41 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-23 14:36 [PATCH NEXT]staging: rtl8192e: Fix typos Justin P. Mattock
2012-04-23 14:41 ` Larry Finger
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.