[PATCH] serial/imx: enable the clock when we really use the uart port

[PATCH] serial/imx: enable the clock when we really use the uart port

[Huang Shijie]

The current code keeps the clock enabled even when we do not really
use the uart port. But keep the clock enabled will consume some power.

In order to save more power, disable the clock when we do not use
the uart, and enable the clock when we really use the uart port.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 drivers/tty/serial/imx.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e7fecee..f5dcdf6 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -694,6 +694,8 @@ static int imx_startup(struct uart_port *port)
 	int retval;
 	unsigned long flags, temp;
 
+	clk_prepare_enable(sport->clk);
+
 	imx_setup_ufcr(sport, 0);
 
 	/* disable the DREN bit (Data Ready interrupt enable) before
@@ -877,6 +879,8 @@ static void imx_shutdown(struct uart_port *port)
 		temp &= ~(UCR1_IREN);
 
 	writel(temp, sport->port.membase + UCR1);
+
+	clk_disable_unprepare(sport->clk);
 }
 
 static void
@@ -1526,6 +1530,7 @@ static int serial_imx_probe(struct platform_device *pdev)
 		goto deinit;
 	platform_set_drvdata(pdev, &sport->port);
 
+	clk_disable_unprepare(sport->clk);
 	return 0;
 deinit:
 	if (pdata && pdata->exit)
@@ -1552,7 +1557,6 @@ static int serial_imx_remove(struct platform_device *pdev)
 
 	if (sport) {
 		uart_remove_one_port(&imx_reg, &sport->port);
-		clk_disable_unprepare(sport->clk);
 		clk_put(sport->clk);
 	}
 
-- 
1.7.3.2

[PATCH] serial/imx: enable the clock when we really use the uart port

[Huang Shijie]

The current code keeps the clock enabled even when we do not really
use the uart port. But keep the clock enabled will consume some power.

In order to save more power, disable the clock when we do not use
the uart, and enable the clock when we really use the uart port.

Signed-off-by: Huang Shijie <b32955@freescale.com>
---
 drivers/tty/serial/imx.c |    6 +++++-
 1 files changed, 5 insertions(+), 1 deletions(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e7fecee..f5dcdf6 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -694,6 +694,8 @@ static int imx_startup(struct uart_port *port)
 	int retval;
 	unsigned long flags, temp;
 
+	clk_prepare_enable(sport->clk);
+
 	imx_setup_ufcr(sport, 0);
 
 	/* disable the DREN bit (Data Ready interrupt enable) before
@@ -877,6 +879,8 @@ static void imx_shutdown(struct uart_port *port)
 		temp &= ~(UCR1_IREN);
 
 	writel(temp, sport->port.membase + UCR1);
+
+	clk_disable_unprepare(sport->clk);
 }
 
 static void
@@ -1526,6 +1530,7 @@ static int serial_imx_probe(struct platform_device *pdev)
 		goto deinit;
 	platform_set_drvdata(pdev, &sport->port);
 
+	clk_disable_unprepare(sport->clk);
 	return 0;
 deinit:
 	if (pdata && pdata->exit)
@@ -1552,7 +1557,6 @@ static int serial_imx_remove(struct platform_device *pdev)
 
 	if (sport) {
 		uart_remove_one_port(&imx_reg, &sport->port);
-		clk_disable_unprepare(sport->clk);
 		clk_put(sport->clk);
 	}
 
-- 
1.7.3.2

Re: [PATCH] serial/imx: enable the clock when we really use the uart port

[Sascha Hauer]

On Wed, May 02, 2012 at 04:19:30PM +0800, Huang Shijie wrote:
> The current code keeps the clock enabled even when we do not really
> use the uart port. But keep the clock enabled will consume some power.
> 
> In order to save more power, disable the clock when we do not use
> the uart, and enable the clock when we really use the uart port.
> 
> Signed-off-by: Huang Shijie <b32955@freescale.com>

This conflicts with my series converting i.MX to the common clock
framework. Please lets delay this until this has been merged.

Sascha

> ---
>  drivers/tty/serial/imx.c |    6 +++++-
>  1 files changed, 5 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index e7fecee..f5dcdf6 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -694,6 +694,8 @@ static int imx_startup(struct uart_port *port)
>  	int retval;
>  	unsigned long flags, temp;
>  
> +	clk_prepare_enable(sport->clk);
> +
>  	imx_setup_ufcr(sport, 0);
>  
>  	/* disable the DREN bit (Data Ready interrupt enable) before
> @@ -877,6 +879,8 @@ static void imx_shutdown(struct uart_port *port)
>  		temp &= ~(UCR1_IREN);
>  
>  	writel(temp, sport->port.membase + UCR1);
> +
> +	clk_disable_unprepare(sport->clk);
>  }
>  
>  static void
> @@ -1526,6 +1530,7 @@ static int serial_imx_probe(struct platform_device *pdev)
>  		goto deinit;
>  	platform_set_drvdata(pdev, &sport->port);
>  
> +	clk_disable_unprepare(sport->clk);
>  	return 0;
>  deinit:
>  	if (pdata && pdata->exit)
> @@ -1552,7 +1557,6 @@ static int serial_imx_remove(struct platform_device *pdev)
>  
>  	if (sport) {
>  		uart_remove_one_port(&imx_reg, &sport->port);
> -		clk_disable_unprepare(sport->clk);
>  		clk_put(sport->clk);
>  	}
>  
> -- 
> 1.7.3.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCH] serial/imx: enable the clock when we really use the uart port

[Sascha Hauer]

On Wed, May 02, 2012 at 04:19:30PM +0800, Huang Shijie wrote:
> The current code keeps the clock enabled even when we do not really
> use the uart port. But keep the clock enabled will consume some power.
> 
> In order to save more power, disable the clock when we do not use
> the uart, and enable the clock when we really use the uart port.
> 
> Signed-off-by: Huang Shijie <b32955@freescale.com>

This conflicts with my series converting i.MX to the common clock
framework. Please lets delay this until this has been merged.

Sascha

> ---
>  drivers/tty/serial/imx.c |    6 +++++-
>  1 files changed, 5 insertions(+), 1 deletions(-)
> 
> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
> index e7fecee..f5dcdf6 100644
> --- a/drivers/tty/serial/imx.c
> +++ b/drivers/tty/serial/imx.c
> @@ -694,6 +694,8 @@ static int imx_startup(struct uart_port *port)
>  	int retval;
>  	unsigned long flags, temp;
>  
> +	clk_prepare_enable(sport->clk);
> +
>  	imx_setup_ufcr(sport, 0);
>  
>  	/* disable the DREN bit (Data Ready interrupt enable) before
> @@ -877,6 +879,8 @@ static void imx_shutdown(struct uart_port *port)
>  		temp &= ~(UCR1_IREN);
>  
>  	writel(temp, sport->port.membase + UCR1);
> +
> +	clk_disable_unprepare(sport->clk);
>  }
>  
>  static void
> @@ -1526,6 +1530,7 @@ static int serial_imx_probe(struct platform_device *pdev)
>  		goto deinit;
>  	platform_set_drvdata(pdev, &sport->port);
>  
> +	clk_disable_unprepare(sport->clk);
>  	return 0;
>  deinit:
>  	if (pdata && pdata->exit)
> @@ -1552,7 +1557,6 @@ static int serial_imx_remove(struct platform_device *pdev)
>  
>  	if (sport) {
>  		uart_remove_one_port(&imx_reg, &sport->port);
> -		clk_disable_unprepare(sport->clk);
>  		clk_put(sport->clk);
>  	}
>  
> -- 
> 1.7.3.2
> 
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCH] serial/imx: enable the clock when we really use the uart port

[Huang Shijie]

于 2012年05月02日 16:19, Sascha Hauer 写道:
> On Wed, May 02, 2012 at 04:19:30PM +0800, Huang Shijie wrote:
>> The current code keeps the clock enabled even when we do not really
>> use the uart port. But keep the clock enabled will consume some power.
>>
>> In order to save more power, disable the clock when we do not use
>> the uart, and enable the clock when we really use the uart port.
>>
>> Signed-off-by: Huang Shijie<b32955@freescale.com>
> This conflicts with my series converting i.MX to the common clock
> framework. Please lets delay this until this has been merged.
OK, thanks

Huang Shijie
> Sascha
>
>> ---
>>   drivers/tty/serial/imx.c |    6 +++++-
>>   1 files changed, 5 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
>> index e7fecee..f5dcdf6 100644
>> --- a/drivers/tty/serial/imx.c
>> +++ b/drivers/tty/serial/imx.c
>> @@ -694,6 +694,8 @@ static int imx_startup(struct uart_port *port)
>>   	int retval;
>>   	unsigned long flags, temp;
>>
>> +	clk_prepare_enable(sport->clk);
>> +
>>   	imx_setup_ufcr(sport, 0);
>>
>>   	/* disable the DREN bit (Data Ready interrupt enable) before
>> @@ -877,6 +879,8 @@ static void imx_shutdown(struct uart_port *port)
>>   		temp&= ~(UCR1_IREN);
>>
>>   	writel(temp, sport->port.membase + UCR1);
>> +
>> +	clk_disable_unprepare(sport->clk);
>>   }
>>
>>   static void
>> @@ -1526,6 +1530,7 @@ static int serial_imx_probe(struct platform_device *pdev)
>>   		goto deinit;
>>   	platform_set_drvdata(pdev,&sport->port);
>>
>> +	clk_disable_unprepare(sport->clk);
>>   	return 0;
>>   deinit:
>>   	if (pdata&&  pdata->exit)
>> @@ -1552,7 +1557,6 @@ static int serial_imx_remove(struct platform_device *pdev)
>>
>>   	if (sport) {
>>   		uart_remove_one_port(&imx_reg,&sport->port);
>> -		clk_disable_unprepare(sport->clk);
>>   		clk_put(sport->clk);
>>   	}
>>
>> -- 
>> 1.7.3.2
>>
>>
>>


--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] serial/imx: enable the clock when we really use the uart port

[Huang Shijie]

? 2012?05?02? 16:19, Sascha Hauer ??:
> On Wed, May 02, 2012 at 04:19:30PM +0800, Huang Shijie wrote:
>> The current code keeps the clock enabled even when we do not really
>> use the uart port. But keep the clock enabled will consume some power.
>>
>> In order to save more power, disable the clock when we do not use
>> the uart, and enable the clock when we really use the uart port.
>>
>> Signed-off-by: Huang Shijie<b32955@freescale.com>
> This conflicts with my series converting i.MX to the common clock
> framework. Please lets delay this until this has been merged.
OK, thanks

Huang Shijie
> Sascha
>
>> ---
>>   drivers/tty/serial/imx.c |    6 +++++-
>>   1 files changed, 5 insertions(+), 1 deletions(-)
>>
>> diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
>> index e7fecee..f5dcdf6 100644
>> --- a/drivers/tty/serial/imx.c
>> +++ b/drivers/tty/serial/imx.c
>> @@ -694,6 +694,8 @@ static int imx_startup(struct uart_port *port)
>>   	int retval;
>>   	unsigned long flags, temp;
>>
>> +	clk_prepare_enable(sport->clk);
>> +
>>   	imx_setup_ufcr(sport, 0);
>>
>>   	/* disable the DREN bit (Data Ready interrupt enable) before
>> @@ -877,6 +879,8 @@ static void imx_shutdown(struct uart_port *port)
>>   		temp&= ~(UCR1_IREN);
>>
>>   	writel(temp, sport->port.membase + UCR1);
>> +
>> +	clk_disable_unprepare(sport->clk);
>>   }
>>
>>   static void
>> @@ -1526,6 +1530,7 @@ static int serial_imx_probe(struct platform_device *pdev)
>>   		goto deinit;
>>   	platform_set_drvdata(pdev,&sport->port);
>>
>> +	clk_disable_unprepare(sport->clk);
>>   	return 0;
>>   deinit:
>>   	if (pdata&&  pdata->exit)
>> @@ -1552,7 +1557,6 @@ static int serial_imx_remove(struct platform_device *pdev)
>>
>>   	if (sport) {
>>   		uart_remove_one_port(&imx_reg,&sport->port);
>> -		clk_disable_unprepare(sport->clk);
>>   		clk_put(sport->clk);
>>   	}
>>
>> -- 
>> 1.7.3.2
>>
>>
>>

Re: [PATCH] serial/imx: enable the clock when we really use the uart port

[Fabio Estevam]

Huang,

On Wed, May 2, 2012 at 5:19 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Wed, May 02, 2012 at 04:19:30PM +0800, Huang Shijie wrote:
>> The current code keeps the clock enabled even when we do not really
>> use the uart port. But keep the clock enabled will consume some power.
>>
>> In order to save more power, disable the clock when we do not use
>> the uart, and enable the clock when we really use the uart port.
>>
>> Signed-off-by: Huang Shijie <b32955@freescale.com>
>
> This conflicts with my series converting i.MX to the common clock
> framework. Please lets delay this until this has been merged.

I think it is OK to resubmit this patch now.

[PATCH] serial/imx: enable the clock when we really use the uart port

[Fabio Estevam]

Huang,

On Wed, May 2, 2012 at 5:19 AM, Sascha Hauer <s.hauer@pengutronix.de> wrote:
> On Wed, May 02, 2012 at 04:19:30PM +0800, Huang Shijie wrote:
>> The current code keeps the clock enabled even when we do not really
>> use the uart port. But keep the clock enabled will consume some power.
>>
>> In order to save more power, disable the clock when we do not use
>> the uart, and enable the clock when we really use the uart port.
>>
>> Signed-off-by: Huang Shijie <b32955@freescale.com>
>
> This conflicts with my series converting i.MX to the common clock
> framework. Please lets delay this until this has been merged.

I think it is OK to resubmit this patch now.

Re: [PATCH] serial/imx: enable the clock when we really use the uart port

[Huang Shijie]

于 2012年06月11日 01:31, Fabio Estevam 写道:
> Huang,
>
> On Wed, May 2, 2012 at 5:19 AM, Sascha Hauer<s.hauer@pengutronix.de>  wrote:
>> On Wed, May 02, 2012 at 04:19:30PM +0800, Huang Shijie wrote:
>>> The current code keeps the clock enabled even when we do not really
>>> use the uart port. But keep the clock enabled will consume some power.
>>>
>>> In order to save more power, disable the clock when we do not use
>>> the uart, and enable the clock when we really use the uart port.
>>>
>>> Signed-off-by: Huang Shijie<b32955@freescale.com>
>> This conflicts with my series converting i.MX to the common clock
>> framework. Please lets delay this until this has been merged.
> I think it is OK to resubmit this patch now.
>
ok, thanks.

Huang Shijie

--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH] serial/imx: enable the clock when we really use the uart port

[Huang Shijie]

? 2012?06?11? 01:31, Fabio Estevam ??:
> Huang,
>
> On Wed, May 2, 2012 at 5:19 AM, Sascha Hauer<s.hauer@pengutronix.de>  wrote:
>> On Wed, May 02, 2012 at 04:19:30PM +0800, Huang Shijie wrote:
>>> The current code keeps the clock enabled even when we do not really
>>> use the uart port. But keep the clock enabled will consume some power.
>>>
>>> In order to save more power, disable the clock when we do not use
>>> the uart, and enable the clock when we really use the uart port.
>>>
>>> Signed-off-by: Huang Shijie<b32955@freescale.com>
>> This conflicts with my series converting i.MX to the common clock
>> framework. Please lets delay this until this has been merged.
> I think it is OK to resubmit this patch now.
>
ok, thanks.

Huang Shijie