All of lore.kernel.org
 help / color / mirror / Atom feed
From: Minchan Kim <minchan@kernel.org>
To: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Nitin Gupta <ngupta@vflare.org>,
	Dan Magenheimer <dan.magenheimer@oracle.com>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: [PATCH 2/3] zram: remove comment in Kconfig
Date: Tue, 15 May 2012 11:31:24 +0900	[thread overview]
Message-ID: <4FB1BFFC.8080405@kernel.org> (raw)
In-Reply-To: <4FB119CA.2080606@linux.vnet.ibm.com>

On 05/14/2012 11:42 PM, Seth Jennings wrote:

> On 05/14/2012 03:45 AM, Minchan Kim wrote:
> 
>> Exactly speaking, zram should has dependency with
>> zsmalloc, not x86. So x86 dependeny check is redundant.
>>
>> Signed-off-by: Minchan Kim <minchan@kernel.org>
>> ---
>>  drivers/staging/zram/Kconfig |    4 +---
>>  1 file changed, 1 insertion(+), 3 deletions(-)
>>
>> diff --git a/drivers/staging/zram/Kconfig b/drivers/staging/zram/Kconfig
>> index 9d11a4c..ee23a86 100644
>> --- a/drivers/staging/zram/Kconfig
>> +++ b/drivers/staging/zram/Kconfig
>> @@ -1,8 +1,6 @@
>>  config ZRAM
>>  	tristate "Compressed RAM block device support"
>> -	# X86 dependency is because zsmalloc uses non-portable pte/tlb
>> -	# functions
>> -	depends on BLOCK && SYSFS && X86
>> +	depends on BLOCK && SYSFS
> 
> 
> Two comments here:
> 
> 1) zram should really depend on ZSMALLOC instead of selecting it
> because, as the patch has it, zram could be selected on an arch that
> zsmalloc doesn't support.


Argh, Totally my mistake. my patch didn't match with my comment, either. :(

> 
> 2) This change would need to be done in zcache as well.


I see.
Seth, Thanks.

send v2.

== CUT_HERE ==

WARNING: multiple messages have this Message-ID (diff)
From: Minchan Kim <minchan@kernel.org>
To: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Nitin Gupta <ngupta@vflare.org>,
	Dan Magenheimer <dan.magenheimer@oracle.com>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org
Subject: Re: [PATCH 2/3] zram: remove comment in Kconfig
Date: Tue, 15 May 2012 11:31:24 +0900	[thread overview]
Message-ID: <4FB1BFFC.8080405@kernel.org> (raw)
In-Reply-To: <4FB119CA.2080606@linux.vnet.ibm.com>

On 05/14/2012 11:42 PM, Seth Jennings wrote:

> On 05/14/2012 03:45 AM, Minchan Kim wrote:
> 
>> Exactly speaking, zram should has dependency with
>> zsmalloc, not x86. So x86 dependeny check is redundant.
>>
>> Signed-off-by: Minchan Kim <minchan@kernel.org>
>> ---
>>  drivers/staging/zram/Kconfig |    4 +---
>>  1 file changed, 1 insertion(+), 3 deletions(-)
>>
>> diff --git a/drivers/staging/zram/Kconfig b/drivers/staging/zram/Kconfig
>> index 9d11a4c..ee23a86 100644
>> --- a/drivers/staging/zram/Kconfig
>> +++ b/drivers/staging/zram/Kconfig
>> @@ -1,8 +1,6 @@
>>  config ZRAM
>>  	tristate "Compressed RAM block device support"
>> -	# X86 dependency is because zsmalloc uses non-portable pte/tlb
>> -	# functions
>> -	depends on BLOCK && SYSFS && X86
>> +	depends on BLOCK && SYSFS
> 
> 
> Two comments here:
> 
> 1) zram should really depend on ZSMALLOC instead of selecting it
> because, as the patch has it, zram could be selected on an arch that
> zsmalloc doesn't support.


Argh, Totally my mistake. my patch didn't match with my comment, either. :(

> 
> 2) This change would need to be done in zcache as well.


I see.
Seth, Thanks.

send v2.

== CUT_HERE ==

>From be81aec5a4f35139aae2bf3d18139fbc114897ca Mon Sep 17 00:00:00 2001
From: Minchan Kim <minchan@kernel.org>
Date: Tue, 15 May 2012 11:26:48 +0900
Subject: [PATCH] [zram,zcache] remove dependency with x86 

Exactly saying, [zram|zcache] should has a dependency with
zsmalloc, not x86. So replace x86 dependeny with ZSMALLOC.

Signed-off-by: Minchan Kim <minchan@kernel.org>
---
 drivers/staging/zcache/Kconfig |    3 +-- 
 drivers/staging/zram/Kconfig   |    3 +-- 
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/staging/zcache/Kconfig b/drivers/staging/zcache/Kconfig
index 7048e01..ceb7f28 100644
--- a/drivers/staging/zcache/Kconfig
+++ b/drivers/staging/zcache/Kconfig
@@ -2,8 +2,7 @@ config ZCACHE
        bool "Dynamic compression of swap pages and clean pagecache pages"
        # X86 dependency is because zsmalloc uses non-portable pte/tlb
        # functions
-       depends on (CLEANCACHE || FRONTSWAP) && CRYPTO=y && X86
-       select ZSMALLOC
+       depends on (CLEANCACHE || FRONTSWAP) && CRYPTO=y && ZSMALLOC
        select CRYPTO_LZO
        default n
        help
diff --git a/drivers/staging/zram/Kconfig b/drivers/staging/zram/Kconfig
index 9d11a4c..e3ac62d 100644
--- a/drivers/staging/zram/Kconfig
+++ b/drivers/staging/zram/Kconfig
@@ -2,8 +2,7 @@ config ZRAM
        tristate "Compressed RAM block device support"
        # X86 dependency is because zsmalloc uses non-portable pte/tlb
        # functions
-       depends on BLOCK && SYSFS && X86
-       select ZSMALLOC
+       depends on BLOCK && SYSFS && ZSMALLOC
        select LZO_COMPRESS
        select LZO_DECOMPRESS
        default n
-- 
1.7.9.5



-- 
Kind regards,
Minchan Kim

  reply	other threads:[~2012-05-15  2:30 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-14  8:45 [PATCH 1/3] zsmalloc: support zsmalloc to ARM, MIPS, SUPERH Minchan Kim
2012-05-14  8:45 ` Minchan Kim
2012-05-14  8:45 ` [PATCH 2/3] zram: remove comment in Kconfig Minchan Kim
2012-05-14  8:45   ` Minchan Kim
2012-05-14 14:42   ` Seth Jennings
2012-05-14 14:42     ` Seth Jennings
2012-05-15  2:31     ` Minchan Kim [this message]
2012-05-15  2:31       ` Minchan Kim
2012-05-15 14:37       ` Konrad Rzeszutek Wilk
2012-05-15 14:37         ` Konrad Rzeszutek Wilk
2012-05-15 15:55       ` Greg Kroah-Hartman
2012-05-15 15:55         ` Greg Kroah-Hartman
2012-05-14  8:45 ` [PATCH 3/3] x86: Support local_flush_tlb_kernel_range Minchan Kim
2012-05-14  8:45   ` Minchan Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FB1BFFC.8080405@kernel.org \
    --to=minchan@kernel.org \
    --cc=dan.magenheimer@oracle.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ngupta@vflare.org \
    --cc=sjenning@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.