All of lore.kernel.org
 help / color / mirror / Atom feed
From: Minchan Kim <minchan@kernel.org>
To: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Nitin Gupta <ngupta@vflare.org>,
	Seth Jennings <sjenning@linux.vnet.ibm.com>,
	Dan Magenheimer <dan.magenheimer@oracle.com>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	Russell King <linux@arm.linux.org.uk>,
	Ralf Baechle <ralf@linux-mips.org>,
	Paul Mundt <lethal@linux-sh.org>,
	Chen Liqin <liqin.chen@sunplusct.com>
Subject: Re: [PATCH v2 1/3] zsmalloc: support zsmalloc to ARM, MIPS, SUPERH
Date: Thu, 17 May 2012 17:04:25 +0900	[thread overview]
Message-ID: <4FB4B109.9000703@kernel.org> (raw)
In-Reply-To: <1337216199.1837.11.camel@ubuntu.ubuntu-domain>

On 05/17/2012 09:56 AM, Guan Xuetao wrote:

> On Thu, 2012-05-17 at 09:07 +0900, Minchan Kim wrote:
>> On 05/16/2012 04:28 PM, Guan Xuetao wrote:
>>
>>> On Wed, 2012-05-16 at 11:05 +0900, Minchan Kim wrote:
>>>> zsmalloc uses set_pte and __flush_tlb_one for performance but
>>>> many architecture don't support it. so this patch removes
>>>> set_pte and __flush_tlb_one which are x86 dependency.
>>>> Instead of it, use local_flush_tlb_kernel_range which are available
>>>> by more architectures. It would be better than supporting only x86
>>>> and last patch in series will enable again with supporting
>>>> local_flush_tlb_kernel_range in x86.
>>>>
>>>> About local_flush_tlb_kernel_range,
>>>> If architecture is very smart, it could flush only tlb entries related to vaddr.
>>>> If architecture is smart, it could flush only tlb entries related to a CPU.
>>>> If architecture is _NOT_ smart, it could flush all entries of all CPUs.
>>>> So, it would be best to support both portability and performance.
>>>>
>>>> Cc: Russell King <linux@arm.linux.org.uk>
>>>> Cc: Ralf Baechle <ralf@linux-mips.org>
>>>> Cc: Paul Mundt <lethal@linux-sh.org>
>>>> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
>>>> Cc: Chen Liqin <liqin.chen@sunplusct.com>
>>>> Signed-off-by: Minchan Kim <minchan@kernel.org>
>>>> ---
>>>>
>>>> Need double check about supporting local_flush_tlb_kernel_range
>>>> in ARM, MIPS, SUPERH maintainers. And I will Ccing unicore32 and
>>>> score maintainers because arch directory in those arch have
>>>> local_flush_tlb_kernel_range, too but I'm very unfamiliar with those
>>>> architecture so pass it to maintainers.
>>>> I didn't coded up dumb local_flush_tlb_kernel_range which flush
>>>> all cpus. I expect someone need ZSMALLOC will implement it easily in future.
>>>> Seth might support it in PowerPC. :)
>>>>
>>>>
>>>>  drivers/staging/zsmalloc/Kconfig         |    6 ++---
>>>>  drivers/staging/zsmalloc/zsmalloc-main.c |   36 +++++++++++++++++++++---------
>>>>  drivers/staging/zsmalloc/zsmalloc_int.h  |    1 -
>>>>  3 files changed, 29 insertions(+), 14 deletions(-)
>>>>
>>>> diff --git a/drivers/staging/zsmalloc/Kconfig b/drivers/staging/zsmalloc/Kconfig
>>>> index a5ab720..def2483 100644
>>>> --- a/drivers/staging/zsmalloc/Kconfig
>>>> +++ b/drivers/staging/zsmalloc/Kconfig
>>>> @@ -1,9 +1,9 @@
>>>>  config ZSMALLOC
>>>>  	tristate "Memory allocator for compressed pages"
>>>> -	# X86 dependency is because of the use of __flush_tlb_one and set_pte
>>>> +	# arch dependency is because of the use of local_unmap_kernel_range
>>>>  	# in zsmalloc-main.c.
>>>> -	# TODO: convert these to portable functions
>>>> -	depends on X86
>>>> +	# TODO: implement local_unmap_kernel_range in all architecture.
>>>> +	depends on (ARM || MIPS || SUPERH)
>>> I suggest removing above line, so if I want to use zsmalloc, I could
>>> enable this configuration easily.
>>
>>
>> I don't get it. What do you mean?
>> If I remove above line, compile error will happen if arch doesn't support local_unmap_kernel_range.
> If I want to use zsmalloc, I will verify local_unmap_kernel_range
> function. In fact, only local_flush_tlb_kernel_range need to be
> considered. So, just keeping the default option 'n' is enough.


I don't think so.
It's terrible experience if all users have to look up local_flush_tlb_kernel_range of arch for using zsmalloc.

BTW, does unicore32 support that function?
If so, I would like to add unicore32 in Kconfig.

-- 
Kind regards,
Minchan Kim

--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org.  For more info on Linux MM,
see: http://www.linux-mm.org/ .
Fight unfair telecom internet charges in Canada: sign http://stopthemeter.ca/
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>

WARNING: multiple messages have this Message-ID (diff)
From: Minchan Kim <minchan@kernel.org>
To: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Nitin Gupta <ngupta@vflare.org>,
	Seth Jennings <sjenning@linux.vnet.ibm.com>,
	Dan Magenheimer <dan.magenheimer@oracle.com>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	Russell King <linux@arm.linux.org.uk>,
	Ralf Baechle <ralf@linux-mips.org>,
	Paul Mundt <lethal@linux-sh.org>,
	Chen Liqin <liqin.chen@sunplusct.com>
Subject: Re: [PATCH v2 1/3] zsmalloc: support zsmalloc to ARM, MIPS, SUPERH
Date: Thu, 17 May 2012 17:04:25 +0900	[thread overview]
Message-ID: <4FB4B109.9000703@kernel.org> (raw)
In-Reply-To: <1337216199.1837.11.camel@ubuntu.ubuntu-domain>

On 05/17/2012 09:56 AM, Guan Xuetao wrote:

> On Thu, 2012-05-17 at 09:07 +0900, Minchan Kim wrote:
>> On 05/16/2012 04:28 PM, Guan Xuetao wrote:
>>
>>> On Wed, 2012-05-16 at 11:05 +0900, Minchan Kim wrote:
>>>> zsmalloc uses set_pte and __flush_tlb_one for performance but
>>>> many architecture don't support it. so this patch removes
>>>> set_pte and __flush_tlb_one which are x86 dependency.
>>>> Instead of it, use local_flush_tlb_kernel_range which are available
>>>> by more architectures. It would be better than supporting only x86
>>>> and last patch in series will enable again with supporting
>>>> local_flush_tlb_kernel_range in x86.
>>>>
>>>> About local_flush_tlb_kernel_range,
>>>> If architecture is very smart, it could flush only tlb entries related to vaddr.
>>>> If architecture is smart, it could flush only tlb entries related to a CPU.
>>>> If architecture is _NOT_ smart, it could flush all entries of all CPUs.
>>>> So, it would be best to support both portability and performance.
>>>>
>>>> Cc: Russell King <linux@arm.linux.org.uk>
>>>> Cc: Ralf Baechle <ralf@linux-mips.org>
>>>> Cc: Paul Mundt <lethal@linux-sh.org>
>>>> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
>>>> Cc: Chen Liqin <liqin.chen@sunplusct.com>
>>>> Signed-off-by: Minchan Kim <minchan@kernel.org>
>>>> ---
>>>>
>>>> Need double check about supporting local_flush_tlb_kernel_range
>>>> in ARM, MIPS, SUPERH maintainers. And I will Ccing unicore32 and
>>>> score maintainers because arch directory in those arch have
>>>> local_flush_tlb_kernel_range, too but I'm very unfamiliar with those
>>>> architecture so pass it to maintainers.
>>>> I didn't coded up dumb local_flush_tlb_kernel_range which flush
>>>> all cpus. I expect someone need ZSMALLOC will implement it easily in future.
>>>> Seth might support it in PowerPC. :)
>>>>
>>>>
>>>>  drivers/staging/zsmalloc/Kconfig         |    6 ++---
>>>>  drivers/staging/zsmalloc/zsmalloc-main.c |   36 +++++++++++++++++++++---------
>>>>  drivers/staging/zsmalloc/zsmalloc_int.h  |    1 -
>>>>  3 files changed, 29 insertions(+), 14 deletions(-)
>>>>
>>>> diff --git a/drivers/staging/zsmalloc/Kconfig b/drivers/staging/zsmalloc/Kconfig
>>>> index a5ab720..def2483 100644
>>>> --- a/drivers/staging/zsmalloc/Kconfig
>>>> +++ b/drivers/staging/zsmalloc/Kconfig
>>>> @@ -1,9 +1,9 @@
>>>>  config ZSMALLOC
>>>>  	tristate "Memory allocator for compressed pages"
>>>> -	# X86 dependency is because of the use of __flush_tlb_one and set_pte
>>>> +	# arch dependency is because of the use of local_unmap_kernel_range
>>>>  	# in zsmalloc-main.c.
>>>> -	# TODO: convert these to portable functions
>>>> -	depends on X86
>>>> +	# TODO: implement local_unmap_kernel_range in all architecture.
>>>> +	depends on (ARM || MIPS || SUPERH)
>>> I suggest removing above line, so if I want to use zsmalloc, I could
>>> enable this configuration easily.
>>
>>
>> I don't get it. What do you mean?
>> If I remove above line, compile error will happen if arch doesn't support local_unmap_kernel_range.
> If I want to use zsmalloc, I will verify local_unmap_kernel_range
> function. In fact, only local_flush_tlb_kernel_range need to be
> considered. So, just keeping the default option 'n' is enough.


I don't think so.
It's terrible experience if all users have to look up local_flush_tlb_kernel_range of arch for using zsmalloc.

BTW, does unicore32 support that function?
If so, I would like to add unicore32 in Kconfig.

-- 
Kind regards,
Minchan Kim

  reply	other threads:[~2012-05-17  8:03 UTC|newest]

Thread overview: 68+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-16  2:05 [PATCH v2 1/3] zsmalloc: support zsmalloc to ARM, MIPS, SUPERH Minchan Kim
2012-05-16  2:05 ` Minchan Kim
2012-05-16  2:05 ` [PATCH v2 2/3] remove dependency with x86 Minchan Kim
2012-05-16  2:05   ` Minchan Kim
2012-05-16 17:11   ` Seth Jennings
2012-05-16 17:11     ` Seth Jennings
2012-05-17  8:06     ` Minchan Kim
2012-05-17  8:06       ` Minchan Kim
2012-05-16  2:05 ` [PATCH v2 3/3] x86: Support local_flush_tlb_kernel_range Minchan Kim
2012-05-16  2:05   ` Minchan Kim
2012-05-17  8:11   ` Minchan Kim
2012-05-17  8:11     ` Minchan Kim
2012-05-17 14:46     ` Greg Kroah-Hartman
2012-05-17 14:46       ` Greg Kroah-Hartman
2012-05-18  8:35       ` Minchan Kim
2012-05-18  8:35         ` Minchan Kim
2012-05-17 14:51     ` Peter Zijlstra
2012-05-17 14:51       ` Peter Zijlstra
2012-05-17 15:08       ` Peter Zijlstra
2012-05-17 15:08         ` Peter Zijlstra
2012-05-19  0:13         ` Alex Shi
2012-05-19  0:13           ` Alex Shi
2012-05-18  8:36       ` Minchan Kim
2012-05-18  8:36         ` Minchan Kim
2012-06-15 15:13       ` Seth Jennings
2012-06-15 15:13         ` Seth Jennings
2012-06-15 16:35         ` Dan Magenheimer
2012-06-15 16:35           ` Dan Magenheimer
2012-06-15 16:45           ` Nitin Gupta
2012-06-15 16:45             ` Nitin Gupta
2012-06-15 17:29             ` Dan Magenheimer
2012-06-15 17:29               ` Dan Magenheimer
2012-06-15 19:07               ` Seth Jennings
2012-06-15 19:07                 ` Seth Jennings
2012-06-15 19:39                 ` Dan Magenheimer
2012-06-15 19:39                   ` Dan Magenheimer
2012-06-15 19:53                   ` Nitin Gupta
2012-06-15 19:53                     ` Nitin Gupta
2012-06-15 20:13                     ` Dan Magenheimer
2012-06-15 20:13                       ` Dan Magenheimer
2012-06-15 21:23                       ` Nitin Gupta
2012-06-15 21:23                         ` Nitin Gupta
2012-06-15 23:26                         ` Seth Jennings
2012-06-15 23:26                           ` Seth Jennings
2012-06-15 16:48           ` Seth Jennings
2012-06-15 16:48             ` Seth Jennings
2012-05-16  7:28 ` [PATCH v2 1/3] zsmalloc: support zsmalloc to ARM, MIPS, SUPERH Guan Xuetao
2012-05-16  7:28   ` Guan Xuetao
2012-05-17  0:07   ` Minchan Kim
2012-05-17  0:07     ` Minchan Kim
2012-05-17  0:56     ` Guan Xuetao
2012-05-17  0:56       ` Guan Xuetao
2012-05-17  8:04       ` Minchan Kim [this message]
2012-05-17  8:04         ` Minchan Kim
2012-05-18  1:45         ` Guan Xuetao
2012-05-18  1:45           ` Guan Xuetao
2012-05-18  8:38           ` Minchan Kim
2012-05-18  8:38             ` Minchan Kim
2012-05-17  8:32 ` Paul Mundt
2012-05-17  8:32   ` Paul Mundt
2012-05-17  9:06   ` Minchan Kim
2012-05-17  9:06     ` Minchan Kim
2012-05-17  9:19     ` Paul Mundt
2012-05-17  9:19       ` Paul Mundt
2012-05-17  9:08   ` Minchan Kim
2012-05-17  9:08     ` Minchan Kim
2012-05-23 20:51 ` Seth Jennings
2012-05-23 20:51   ` Seth Jennings

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FB4B109.9000703@kernel.org \
    --to=minchan@kernel.org \
    --cc=dan.magenheimer@oracle.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=gxt@mprc.pku.edu.cn \
    --cc=lethal@linux-sh.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=linux@arm.linux.org.uk \
    --cc=liqin.chen@sunplusct.com \
    --cc=ngupta@vflare.org \
    --cc=ralf@linux-mips.org \
    --cc=sjenning@linux.vnet.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.