meta-ti layer and tag 2012.05-yocto1.2

meta-ti layer and tag 2012.05-yocto1.2

[Enric Balletbò i Serra]

Hi all,

Just to be sure, should the tag 2012.05-yocto1.2 from meta-ti layer be
compatible with yocto-1.2 (denzil) branch ? Or also depends on other
layers. Adding only the meta-ti layer to the yocto 1.2 seems is not
working, there is an unmet dependency on systemd.bbclass.

  yocto-1.2$ bitbake core-image-minimal
  ERROR: ParseError at
/home/eballetbo/Workspace/poky/yocto-1.2/meta-ti/recipes-misc/payload/bonescript.bb:5:
Could not inherit file classes/systemd.bbclass
  ERROR: Command execution failed: Exited with 1

Cheers,
   Enric

Re: meta-ti layer and tag 2012.05-yocto1.2

[Jack Mitchell]

On 18/05/12 08:48, Enric Balletbò i Serra wrote:
> Hi all,
>
> Just to be sure, should the tag 2012.05-yocto1.2 from meta-ti layer be
> compatible with yocto-1.2 (denzil) branch ? Or also depends on other
> layers. Adding only the meta-ti layer to the yocto 1.2 seems is not
> working, there is an unmet dependency on systemd.bbclass.
>
>    yocto-1.2$ bitbake core-image-minimal
>    ERROR: ParseError at
> /home/eballetbo/Workspace/poky/yocto-1.2/meta-ti/recipes-misc/payload/bonescript.bb:5:
> Could not inherit file classes/systemd.bbclass
>    ERROR: Command execution failed: Exited with 1
>
> Cheers,
>     Enric
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto


Hi Enric, to quote Denys from a patch to meta-ti earlier:

README: by popular demand add comment on how to avoid systemd breakage

Signed-off-by: Denys Dmytriyenko<denys@ti.com>

---

  README |    6 ++++++
  1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/README b/README
index b376695..0df391f 100644
--- a/README
+++ b/README
@@ -11,6 +11,12 @@ layers: meta
  branch: master


+When not depending on meta-openembedded and not using systemd, you may need to
+mask few miscellaneous recipes requiring systemd, by adding this to local.conf:
+
+BBMASK = "meta-ti/recipes-misc"
+
+
  The base BSP part of meta-ti should work with different OpenEmbedded/Yocto
  distributions and layer stacks, such as:
  distro-less (only with OE-Core), with Yocto/Poky, with Angstrom or Arago.


Regards,

-- 

   Jack Mitchell (jack@embed.me.uk)
   Embedded Systems Engineer
   http://www.embed.me.uk

--

Re: meta-ti layer and tag 2012.05-yocto1.2

[Enric Balletbò i Serra]

Hi Jack

2012/5/18 Jack Mitchell <ml@communistcode.co.uk>:
> On 18/05/12 08:48, Enric Balletbò i Serra wrote:
>>
>> Hi all,
>>
>> Just to be sure, should the tag 2012.05-yocto1.2 from meta-ti layer be
>> compatible with yocto-1.2 (denzil) branch ? Or also depends on other
>> layers. Adding only the meta-ti layer to the yocto 1.2 seems is not
>> working, there is an unmet dependency on systemd.bbclass.
>>
>>   yocto-1.2$ bitbake core-image-minimal
>>   ERROR: ParseError at
>>
>> /home/eballetbo/Workspace/poky/yocto-1.2/meta-ti/recipes-misc/payload/bonescript.bb:5:
>> Could not inherit file classes/systemd.bbclass
>>   ERROR: Command execution failed: Exited with 1
>>
>> Cheers,
>>    Enric
>> _______________________________________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.org/listinfo/yocto
>
>
>
> Hi Enric, to quote Denys from a patch to meta-ti earlier:
>
> README: by popular demand add comment on how to avoid systemd breakage
>
> Signed-off-by: Denys Dmytriyenko<denys@ti.com>
>
> ---
>
>  README |    6 ++++++
>  1 files changed, 6 insertions(+), 0 deletions(-)
>
> diff --git a/README b/README
> index b376695..0df391f 100644
> --- a/README
> +++ b/README
> @@ -11,6 +11,12 @@ layers: meta
>  branch: master
>
>
> +When not depending on meta-openembedded and not using systemd, you may need
> to
> +mask few miscellaneous recipes requiring systemd, by adding this to
> local.conf:
> +
> +BBMASK = "meta-ti/recipes-misc"
> +
> +
>  The base BSP part of meta-ti should work with different OpenEmbedded/Yocto
>  distributions and layer stacks, such as:
>  distro-less (only with OE-Core), with Yocto/Poky, with Angstrom or Arago.
>

Thanks, that works.

I'm a bit confusing because the README of meta-ti layer says that this
layer can only work with OE-core/Yocto but not sure that anyone has
tested. For example bitbaking ti-dsplink recipe results on

    | make[1]: /arm-poky-linux-gnueabi-gcc: Command not found

The problem seems that a lot of meta-ti recipes uses the
TOOLCHAIN_PATH variable that is not defined in OE-core/Yocto or I'm
wrong?. This don't look difficult to solve but are more surprises
waiting for me after solve this ? Someone has tried this layer with
only OE-core/Yocto ?

Thanks,
   Enric

>
> Regards,
>
> --
>
>  Jack Mitchell (jack@embed.me.uk)
>  Embedded Systems Engineer
>  http://www.embed.me.uk
>
> --
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto

Re: meta-ti layer and tag 2012.05-yocto1.2

[Gary Thomas]

On 2012-05-18 04:36, Enric Balletbò i Serra wrote:
> Hi Jack
>
> 2012/5/18 Jack Mitchell<ml@communistcode.co.uk>:
>> On 18/05/12 08:48, Enric Balletbò i Serra wrote:
>>>
>>> Hi all,
>>>
>>> Just to be sure, should the tag 2012.05-yocto1.2 from meta-ti layer be
>>> compatible with yocto-1.2 (denzil) branch ? Or also depends on other
>>> layers. Adding only the meta-ti layer to the yocto 1.2 seems is not
>>> working, there is an unmet dependency on systemd.bbclass.
>>>
>>>    yocto-1.2$ bitbake core-image-minimal
>>>    ERROR: ParseError at
>>>
>>> /home/eballetbo/Workspace/poky/yocto-1.2/meta-ti/recipes-misc/payload/bonescript.bb:5:
>>> Could not inherit file classes/systemd.bbclass
>>>    ERROR: Command execution failed: Exited with 1
>>>
>>> Cheers,
>>>     Enric
>>> _______________________________________________
>>> yocto mailing list
>>> yocto@yoctoproject.org
>>> https://lists.yoctoproject.org/listinfo/yocto
>>
>>
>>
>> Hi Enric, to quote Denys from a patch to meta-ti earlier:
>>
>> README: by popular demand add comment on how to avoid systemd breakage
>>
>> Signed-off-by: Denys Dmytriyenko<denys@ti.com>
>>
>> ---
>>
>>   README |    6 ++++++
>>   1 files changed, 6 insertions(+), 0 deletions(-)
>>
>> diff --git a/README b/README
>> index b376695..0df391f 100644
>> --- a/README
>> +++ b/README
>> @@ -11,6 +11,12 @@ layers: meta
>>   branch: master
>>
>>
>> +When not depending on meta-openembedded and not using systemd, you may need
>> to
>> +mask few miscellaneous recipes requiring systemd, by adding this to
>> local.conf:
>> +
>> +BBMASK = "meta-ti/recipes-misc"
>> +
>> +
>>   The base BSP part of meta-ti should work with different OpenEmbedded/Yocto
>>   distributions and layer stacks, such as:
>>   distro-less (only with OE-Core), with Yocto/Poky, with Angstrom or Arago.
>>
>
> Thanks, that works.
>
> I'm a bit confusing because the README of meta-ti layer says that this
> layer can only work with OE-core/Yocto but not sure that anyone has
> tested. For example bitbaking ti-dsplink recipe results on
>
>      | make[1]: /arm-poky-linux-gnueabi-gcc: Command not found
>
> The problem seems that a lot of meta-ti recipes uses the
> TOOLCHAIN_PATH variable that is not defined in OE-core/Yocto or I'm
> wrong?. This don't look difficult to solve but are more surprises
> waiting for me after solve this ? Someone has tried this layer with
> only OE-core/Yocto ?

Yes, I have used it this way, however I'm using the master/tip, not the
mentioned tag.

I just built ti-dsplink using
   meta              = "master:38da655788361e949d605bebfab45cf5830df613"
   meta-ti           = "master:fa87ca0b1a1890d262a591aee50f082194f45317"

-- 
------------------------------------------------------------
Gary Thomas                 |  Consulting for the
MLB Associates              |    Embedded world
------------------------------------------------------------