From: rnayak@ti.com (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] clk: Add support for rate table based dividers
Date: Tue, 22 May 2012 10:15:26 +0530 [thread overview]
Message-ID: <4FBB19E6.2040403@ti.com> (raw)
In-Reply-To: <4FBA0F3D.0@codethink.co.uk>
Hi Ben,
On Monday 21 May 2012 03:17 PM, Ben Dooks wrote:
> On 17/05/12 11:22, Rajendra Nayak wrote:
>> Some divider clks do not have any obvious relationship
>> between the divider and the value programmed in the
>> register. For instance, say a value of 1 could signify divide
>> by 6 and a value of 2 could signify divide by 4 etc.
>> Also there are dividers where not all values possible
>> based on the bitfield width are valid. For instance
>> a 3 bit wide bitfield can be used to program a value
>> from 0 to 7. However its possible that only 0 to 4
>> are valid values.
>>
>> All these cases need the platform code to pass a simple
>> table of divider/value tuple, so the framework knows
>> the exact value to be written based on the divider
>> calculation and can also do better error checking.
>>
>> This patch adds support for such rate table based
>> dividers.
>
> I was considering the idea that you simply pass a
> pointer to a set of routines and a data pointer to
> the clk-divider code so that any new cases don't
> require changing the drivers/clk/clk-divider.c
I don;t know if I understand your comment completely.
Are you suggesting the get min/max etc be function pointers
passed by platform code (and implemented in platform code?)
so clk-divider does not need an update every time a new divider
type is added?
The idea of extending clk-divider was so its useful for more
than just OMAP, so the code in clk-divider can be reused across
multiple platforms. Did I understand your comment right?
regards,
Rajendra
>
> This would make the get max / min / special just
> a function call through a struct.
>
>> Signed-off-by: Rajendra Nayak<rnayak@ti.com>
>> ---
>> drivers/clk/clk-divider.c | 67 ++++++++++++++++++++++++++++++++++++++++--
>> include/linux/clk-private.h | 3 +-
>> include/linux/clk-provider.h | 10 +++++-
>> 3 files changed, 75 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
>> index e548c43..e4911ee 100644
>> --- a/drivers/clk/clk-divider.c
>> +++ b/drivers/clk/clk-divider.c
>> @@ -32,30 +32,69 @@
>> #define div_mask(d) ((1<< (d->width)) - 1)
>> #define is_power_of_two(i) !(i& ~i)
>>
>> +static unsigned int _get_table_maxdiv(const struct clk_div_table *table)
>> +{
>> + unsigned int maxdiv;
>> + const struct clk_div_table *clkt;
>> +
>> + for (clkt = table; clkt->div; clkt++)
>> + if (clkt->div> maxdiv)
>> + maxdiv = clkt->div;
>> + return maxdiv;
>> +}
>> +
>> static unsigned int _get_maxdiv(struct clk_divider *divider)
>> {
>> if (divider->flags& CLK_DIVIDER_ONE_BASED)
>> return div_mask(divider);
>> if (divider->flags& CLK_DIVIDER_POWER_OF_TWO)
>> return 1<< div_mask(divider);
>> + if (divider->table)
>> + return _get_table_maxdiv(divider->table);
>> return div_mask(divider) + 1;
>> }
>>
>> +static unsigned int _get_table_div(const struct clk_div_table *table,
>> + unsigned int val)
>> +{
>> + const struct clk_div_table *clkt;
>> +
>> + for (clkt = table; clkt->div; clkt++)
>> + if (clkt->val == val)
>> + return clkt->div;
>> + return 0;
>> +}
>> +
>> static unsigned int _get_div(struct clk_divider *divider, unsigned int
>> val)
>> {
>> if (divider->flags& CLK_DIVIDER_ONE_BASED)
>> return val;
>> if (divider->flags& CLK_DIVIDER_POWER_OF_TWO)
>> return 1<< val;
>> + if (divider->table)
>> + return _get_table_div(divider->table, val);
>> return val + 1;
>> }
>>
>> +static unsigned int _get_table_val(const struct clk_div_table *table,
>> + unsigned int div)
>> +{
>> + const struct clk_div_table *clkt;
>> +
>> + for (clkt = table; clkt->div; clkt++)
>> + if (clkt->div == div)
>> + return clkt->val;
>> + return 0;
>> +}
>> +
>> static unsigned int _get_val(struct clk_divider *divider, u8 div)
>> {
>> if (divider->flags& CLK_DIVIDER_ONE_BASED)
>> return div;
>> if (divider->flags& CLK_DIVIDER_POWER_OF_TWO)
>> return __ffs(div);
>> + if (divider->table)
>> + return _get_table_val(divider->table, div);
>> return div - 1;
>> }
>>
>> @@ -84,6 +123,26 @@ static unsigned long
>> clk_divider_recalc_rate(struct clk_hw *hw,
>> */
>> #define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1)
>>
>> +static bool _is_valid_table_div(const struct clk_div_table *table,
>> + unsigned int div)
>> +{
>> + const struct clk_div_table *clkt;
>> +
>> + for (clkt = table; clkt->div; clkt++)
>> + if (clkt->div == div)
>> + return true;
>> + return false;
>> +}
>> +
>> +static bool _is_valid_div(struct clk_divider *divider, unsigned int div)
>> +{
>> + if (divider->flags& CLK_DIVIDER_POWER_OF_TWO)
>> + return is_power_of_two(div);
>> + if (divider->table)
>> + return _is_valid_table_div(divider->table, div);
>> + return true;
>> +}
>> +
>> static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
>> unsigned long *best_parent_rate)
>> {
>> @@ -111,8 +170,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw,
>> unsigned long rate,
>> maxdiv = min(ULONG_MAX / rate, maxdiv);
>>
>> for (i = 1; i<= maxdiv; i++) {
>> - if ((divider->flags& CLK_DIVIDER_POWER_OF_TWO)
>> - && (!is_power_of_two(i)))
>> + if (!_is_valid_div(divider, i))
>> continue;
>> parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
>> MULT_ROUND_UP(rate, i));
>> @@ -186,12 +244,14 @@ EXPORT_SYMBOL_GPL(clk_divider_ops);
>> * @shift: number of bits to shift the bitfield
>> * @width: width of the bitfield
>> * @clk_divider_flags: divider-specific flags for this clock
>> + * @table: array of divider/value pairs ending with a div set to 0
>> * @lock: shared register lock for this clock
>> */
>> struct clk *clk_register_divider(struct device *dev, const char *name,
>> const char *parent_name, unsigned long flags,
>> void __iomem *reg, u8 shift, u8 width,
>> - u8 clk_divider_flags, spinlock_t *lock)
>> + u8 clk_divider_flags, const struct clk_div_table *table,
>> + spinlock_t *lock)
>> {
>> struct clk_divider *div;
>> struct clk *clk;
>> @@ -217,6 +277,7 @@ struct clk *clk_register_divider(struct device
>> *dev, const char *name,
>> div->flags = clk_divider_flags;
>> div->lock = lock;
>> div->hw.init =&init;
>> + div->table = table;
>>
>> /* register the clock */
>> clk = clk_register(dev,&div->hw);
>> diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
>> index eb3f84b..2479239 100644
>> --- a/include/linux/clk-private.h
>> +++ b/include/linux/clk-private.h
>> @@ -105,7 +105,7 @@ struct clk {
>>
>> #define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \
>> _flags, _reg, _shift, _width, \
>> - _divider_flags, _lock) \
>> + _divider_flags, _table, _lock) \
>> static struct clk _name; \
>> static const char *_name##_parent_names[] = { \
>> _parent_name, \
>> @@ -121,6 +121,7 @@ struct clk {
>> .shift = _shift, \
>> .width = _width, \
>> .flags = _divider_flags, \
>> + .table = _table, \
>> .lock = _lock, \
>> }; \
>> DEFINE_CLK(_name, clk_divider_ops, _flags, \
>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
>> index 4a0b483..22bc067 100644
>> --- a/include/linux/clk-provider.h
>> +++ b/include/linux/clk-provider.h
>> @@ -203,6 +203,11 @@ struct clk *clk_register_gate(struct device *dev,
>> const char *name,
>> void __iomem *reg, u8 bit_idx,
>> u8 clk_gate_flags, spinlock_t *lock);
>>
>> +struct clk_div_table {
>> + unsigned int val;
>> + unsigned int div;
>> +};
>> +
>> /**
>> * struct clk_divider - adjustable divider clock
>> *
>> @@ -210,6 +215,7 @@ struct clk *clk_register_gate(struct device *dev,
>> const char *name,
>> * @reg: register containing the divider
>> * @shift: shift to the divider bit field
>> * @width: width of the divider bit field
>> + * @table: array of value/divider pairs, last entry should have div = 0
>> * @lock: register lock
>> *
>> * Clock with an adjustable divider affecting its output frequency.
>> Implements
>> @@ -229,6 +235,7 @@ struct clk_divider {
>> u8 shift;
>> u8 width;
>> u8 flags;
>> + const struct clk_div_table *table;
>> spinlock_t *lock;
>> };
>>
>> @@ -239,7 +246,8 @@ extern const struct clk_ops clk_divider_ops;
>> struct clk *clk_register_divider(struct device *dev, const char *name,
>> const char *parent_name, unsigned long flags,
>> void __iomem *reg, u8 shift, u8 width,
>> - u8 clk_divider_flags, spinlock_t *lock);
>> + u8 clk_divider_flags, const struct clk_div_table *table,
>> + spinlock_t *lock);
>>
>> /**
>> * struct clk_mux - multiplexer clock
>
>
WARNING: multiple messages have this Message-ID (diff)
From: Rajendra Nayak <rnayak@ti.com>
To: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: mturquette@ti.com, mturquette@linaro.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 2/2] clk: Add support for rate table based dividers
Date: Tue, 22 May 2012 10:15:26 +0530 [thread overview]
Message-ID: <4FBB19E6.2040403@ti.com> (raw)
In-Reply-To: <4FBA0F3D.0@codethink.co.uk>
Hi Ben,
On Monday 21 May 2012 03:17 PM, Ben Dooks wrote:
> On 17/05/12 11:22, Rajendra Nayak wrote:
>> Some divider clks do not have any obvious relationship
>> between the divider and the value programmed in the
>> register. For instance, say a value of 1 could signify divide
>> by 6 and a value of 2 could signify divide by 4 etc.
>> Also there are dividers where not all values possible
>> based on the bitfield width are valid. For instance
>> a 3 bit wide bitfield can be used to program a value
>> from 0 to 7. However its possible that only 0 to 4
>> are valid values.
>>
>> All these cases need the platform code to pass a simple
>> table of divider/value tuple, so the framework knows
>> the exact value to be written based on the divider
>> calculation and can also do better error checking.
>>
>> This patch adds support for such rate table based
>> dividers.
>
> I was considering the idea that you simply pass a
> pointer to a set of routines and a data pointer to
> the clk-divider code so that any new cases don't
> require changing the drivers/clk/clk-divider.c
I don;t know if I understand your comment completely.
Are you suggesting the get min/max etc be function pointers
passed by platform code (and implemented in platform code?)
so clk-divider does not need an update every time a new divider
type is added?
The idea of extending clk-divider was so its useful for more
than just OMAP, so the code in clk-divider can be reused across
multiple platforms. Did I understand your comment right?
regards,
Rajendra
>
> This would make the get max / min / special just
> a function call through a struct.
>
>> Signed-off-by: Rajendra Nayak<rnayak@ti.com>
>> ---
>> drivers/clk/clk-divider.c | 67 ++++++++++++++++++++++++++++++++++++++++--
>> include/linux/clk-private.h | 3 +-
>> include/linux/clk-provider.h | 10 +++++-
>> 3 files changed, 75 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/clk/clk-divider.c b/drivers/clk/clk-divider.c
>> index e548c43..e4911ee 100644
>> --- a/drivers/clk/clk-divider.c
>> +++ b/drivers/clk/clk-divider.c
>> @@ -32,30 +32,69 @@
>> #define div_mask(d) ((1<< (d->width)) - 1)
>> #define is_power_of_two(i) !(i& ~i)
>>
>> +static unsigned int _get_table_maxdiv(const struct clk_div_table *table)
>> +{
>> + unsigned int maxdiv;
>> + const struct clk_div_table *clkt;
>> +
>> + for (clkt = table; clkt->div; clkt++)
>> + if (clkt->div> maxdiv)
>> + maxdiv = clkt->div;
>> + return maxdiv;
>> +}
>> +
>> static unsigned int _get_maxdiv(struct clk_divider *divider)
>> {
>> if (divider->flags& CLK_DIVIDER_ONE_BASED)
>> return div_mask(divider);
>> if (divider->flags& CLK_DIVIDER_POWER_OF_TWO)
>> return 1<< div_mask(divider);
>> + if (divider->table)
>> + return _get_table_maxdiv(divider->table);
>> return div_mask(divider) + 1;
>> }
>>
>> +static unsigned int _get_table_div(const struct clk_div_table *table,
>> + unsigned int val)
>> +{
>> + const struct clk_div_table *clkt;
>> +
>> + for (clkt = table; clkt->div; clkt++)
>> + if (clkt->val == val)
>> + return clkt->div;
>> + return 0;
>> +}
>> +
>> static unsigned int _get_div(struct clk_divider *divider, unsigned int
>> val)
>> {
>> if (divider->flags& CLK_DIVIDER_ONE_BASED)
>> return val;
>> if (divider->flags& CLK_DIVIDER_POWER_OF_TWO)
>> return 1<< val;
>> + if (divider->table)
>> + return _get_table_div(divider->table, val);
>> return val + 1;
>> }
>>
>> +static unsigned int _get_table_val(const struct clk_div_table *table,
>> + unsigned int div)
>> +{
>> + const struct clk_div_table *clkt;
>> +
>> + for (clkt = table; clkt->div; clkt++)
>> + if (clkt->div == div)
>> + return clkt->val;
>> + return 0;
>> +}
>> +
>> static unsigned int _get_val(struct clk_divider *divider, u8 div)
>> {
>> if (divider->flags& CLK_DIVIDER_ONE_BASED)
>> return div;
>> if (divider->flags& CLK_DIVIDER_POWER_OF_TWO)
>> return __ffs(div);
>> + if (divider->table)
>> + return _get_table_val(divider->table, div);
>> return div - 1;
>> }
>>
>> @@ -84,6 +123,26 @@ static unsigned long
>> clk_divider_recalc_rate(struct clk_hw *hw,
>> */
>> #define MULT_ROUND_UP(r, m) ((r) * (m) + (m) - 1)
>>
>> +static bool _is_valid_table_div(const struct clk_div_table *table,
>> + unsigned int div)
>> +{
>> + const struct clk_div_table *clkt;
>> +
>> + for (clkt = table; clkt->div; clkt++)
>> + if (clkt->div == div)
>> + return true;
>> + return false;
>> +}
>> +
>> +static bool _is_valid_div(struct clk_divider *divider, unsigned int div)
>> +{
>> + if (divider->flags& CLK_DIVIDER_POWER_OF_TWO)
>> + return is_power_of_two(div);
>> + if (divider->table)
>> + return _is_valid_table_div(divider->table, div);
>> + return true;
>> +}
>> +
>> static int clk_divider_bestdiv(struct clk_hw *hw, unsigned long rate,
>> unsigned long *best_parent_rate)
>> {
>> @@ -111,8 +170,7 @@ static int clk_divider_bestdiv(struct clk_hw *hw,
>> unsigned long rate,
>> maxdiv = min(ULONG_MAX / rate, maxdiv);
>>
>> for (i = 1; i<= maxdiv; i++) {
>> - if ((divider->flags& CLK_DIVIDER_POWER_OF_TWO)
>> - && (!is_power_of_two(i)))
>> + if (!_is_valid_div(divider, i))
>> continue;
>> parent_rate = __clk_round_rate(__clk_get_parent(hw->clk),
>> MULT_ROUND_UP(rate, i));
>> @@ -186,12 +244,14 @@ EXPORT_SYMBOL_GPL(clk_divider_ops);
>> * @shift: number of bits to shift the bitfield
>> * @width: width of the bitfield
>> * @clk_divider_flags: divider-specific flags for this clock
>> + * @table: array of divider/value pairs ending with a div set to 0
>> * @lock: shared register lock for this clock
>> */
>> struct clk *clk_register_divider(struct device *dev, const char *name,
>> const char *parent_name, unsigned long flags,
>> void __iomem *reg, u8 shift, u8 width,
>> - u8 clk_divider_flags, spinlock_t *lock)
>> + u8 clk_divider_flags, const struct clk_div_table *table,
>> + spinlock_t *lock)
>> {
>> struct clk_divider *div;
>> struct clk *clk;
>> @@ -217,6 +277,7 @@ struct clk *clk_register_divider(struct device
>> *dev, const char *name,
>> div->flags = clk_divider_flags;
>> div->lock = lock;
>> div->hw.init =&init;
>> + div->table = table;
>>
>> /* register the clock */
>> clk = clk_register(dev,&div->hw);
>> diff --git a/include/linux/clk-private.h b/include/linux/clk-private.h
>> index eb3f84b..2479239 100644
>> --- a/include/linux/clk-private.h
>> +++ b/include/linux/clk-private.h
>> @@ -105,7 +105,7 @@ struct clk {
>>
>> #define DEFINE_CLK_DIVIDER(_name, _parent_name, _parent_ptr, \
>> _flags, _reg, _shift, _width, \
>> - _divider_flags, _lock) \
>> + _divider_flags, _table, _lock) \
>> static struct clk _name; \
>> static const char *_name##_parent_names[] = { \
>> _parent_name, \
>> @@ -121,6 +121,7 @@ struct clk {
>> .shift = _shift, \
>> .width = _width, \
>> .flags = _divider_flags, \
>> + .table = _table, \
>> .lock = _lock, \
>> }; \
>> DEFINE_CLK(_name, clk_divider_ops, _flags, \
>> diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
>> index 4a0b483..22bc067 100644
>> --- a/include/linux/clk-provider.h
>> +++ b/include/linux/clk-provider.h
>> @@ -203,6 +203,11 @@ struct clk *clk_register_gate(struct device *dev,
>> const char *name,
>> void __iomem *reg, u8 bit_idx,
>> u8 clk_gate_flags, spinlock_t *lock);
>>
>> +struct clk_div_table {
>> + unsigned int val;
>> + unsigned int div;
>> +};
>> +
>> /**
>> * struct clk_divider - adjustable divider clock
>> *
>> @@ -210,6 +215,7 @@ struct clk *clk_register_gate(struct device *dev,
>> const char *name,
>> * @reg: register containing the divider
>> * @shift: shift to the divider bit field
>> * @width: width of the divider bit field
>> + * @table: array of value/divider pairs, last entry should have div = 0
>> * @lock: register lock
>> *
>> * Clock with an adjustable divider affecting its output frequency.
>> Implements
>> @@ -229,6 +235,7 @@ struct clk_divider {
>> u8 shift;
>> u8 width;
>> u8 flags;
>> + const struct clk_div_table *table;
>> spinlock_t *lock;
>> };
>>
>> @@ -239,7 +246,8 @@ extern const struct clk_ops clk_divider_ops;
>> struct clk *clk_register_divider(struct device *dev, const char *name,
>> const char *parent_name, unsigned long flags,
>> void __iomem *reg, u8 shift, u8 width,
>> - u8 clk_divider_flags, spinlock_t *lock);
>> + u8 clk_divider_flags, const struct clk_div_table *table,
>> + spinlock_t *lock);
>>
>> /**
>> * struct clk_mux - multiplexer clock
>
>
next prev parent reply other threads:[~2012-05-22 4:45 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-17 10:22 [PATCH 0/2] clk: Add support for more default divider types Rajendra Nayak
2012-05-17 10:22 ` Rajendra Nayak
2012-05-17 10:22 ` [PATCH 1/2] clk: Add support for power of two type dividers Rajendra Nayak
2012-05-17 10:22 ` Rajendra Nayak
2012-05-22 20:26 ` Mike Turquette
2012-05-22 20:26 ` Mike Turquette
2012-05-23 4:45 ` Rajendra Nayak
2012-05-23 4:45 ` Rajendra Nayak
2012-05-17 10:22 ` [PATCH 2/2] clk: Add support for rate table based dividers Rajendra Nayak
2012-05-17 10:22 ` Rajendra Nayak
2012-05-21 9:47 ` Ben Dooks
2012-05-21 9:47 ` Ben Dooks
2012-05-22 4:45 ` Rajendra Nayak [this message]
2012-05-22 4:45 ` Rajendra Nayak
2012-05-31 4:05 ` Saravana Kannan
2012-05-31 4:05 ` Saravana Kannan
2012-06-01 4:40 ` Rajendra Nayak
2012-06-01 4:40 ` Rajendra Nayak
2012-05-29 21:15 ` Turquette, Mike
2012-05-29 21:15 ` Turquette, Mike
2012-05-30 9:24 ` Rajendra Nayak
2012-05-30 9:24 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FBB19E6.2040403@ti.com \
--to=rnayak@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.