From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
To: netdev <netdev@vger.kernel.org>
Cc: SH-Linux <linux-sh@vger.kernel.org>
Subject: [PATCH v5 1/6] net: sh_eth: remove unnecessary function
Date: Tue, 29 May 2012 08:14:40 +0000 [thread overview]
Message-ID: <4FC48570.8040204@renesas.com> (raw)
The sh_eth_timer() called mod_timer() for itself.
So, this patch removes the function.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
about v5:
- this patch is the same as v3
drivers/net/ethernet/renesas/sh_eth.c | 22 ----------------------
drivers/net/ethernet/renesas/sh_eth.h | 1 -
2 files changed, 0 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index be3c221..c35084a 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1289,14 +1289,6 @@ other_irq:
return ret;
}
-static void sh_eth_timer(unsigned long data)
-{
- struct net_device *ndev = (struct net_device *)data;
- struct sh_eth_private *mdp = netdev_priv(ndev);
-
- mod_timer(&mdp->timer, jiffies + (10 * HZ));
-}
-
/* PHY state control function */
static void sh_eth_adjust_link(struct net_device *ndev)
{
@@ -1544,11 +1536,6 @@ static int sh_eth_open(struct net_device *ndev)
if (ret)
goto out_free_irq;
- /* Set the timer to check for link beat. */
- init_timer(&mdp->timer);
- mdp->timer.expires = (jiffies + (24 * HZ)) / 10;/* 2.4 sec. */
- setup_timer(&mdp->timer, sh_eth_timer, (unsigned long)ndev);
-
return ret;
out_free_irq:
@@ -1573,9 +1560,6 @@ static void sh_eth_tx_timeout(struct net_device *ndev)
/* tx_errors count up */
ndev->stats.tx_errors++;
- /* timer off */
- del_timer_sync(&mdp->timer);
-
/* Free all the skbuffs in the Rx queue. */
for (i = 0; i < RX_RING_SIZE; i++) {
rxdesc = &mdp->rx_ring[i];
@@ -1593,10 +1577,6 @@ static void sh_eth_tx_timeout(struct net_device *ndev)
/* device init */
sh_eth_dev_init(ndev);
-
- /* timer on */
- mdp->timer.expires = (jiffies + (24 * HZ)) / 10;/* 2.4 sec. */
- add_timer(&mdp->timer);
}
/* Packet transmit function */
@@ -1669,8 +1649,6 @@ static int sh_eth_close(struct net_device *ndev)
free_irq(ndev->irq, ndev);
- del_timer_sync(&mdp->timer);
-
/* Free all the skbuffs in the Rx queue. */
sh_eth_ring_free(ndev);
diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h
index 57b8e1f..9e8e4d5 100644
--- a/drivers/net/ethernet/renesas/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
@@ -771,7 +771,6 @@ struct sh_eth_private {
struct sh_eth_txdesc *tx_ring;
struct sk_buff **rx_skbuff;
struct sk_buff **tx_skbuff;
- struct timer_list timer;
spinlock_t lock;
u32 cur_rx, dirty_rx; /* Producer/consumer ring indices */
u32 cur_tx, dirty_tx;
--
1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
To: netdev <netdev@vger.kernel.org>
Cc: SH-Linux <linux-sh@vger.kernel.org>
Subject: [PATCH v5 1/6] net: sh_eth: remove unnecessary function
Date: Tue, 29 May 2012 17:14:40 +0900 [thread overview]
Message-ID: <4FC48570.8040204@renesas.com> (raw)
The sh_eth_timer() called mod_timer() for itself.
So, this patch removes the function.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
about v5:
- this patch is the same as v3
drivers/net/ethernet/renesas/sh_eth.c | 22 ----------------------
drivers/net/ethernet/renesas/sh_eth.h | 1 -
2 files changed, 0 insertions(+), 23 deletions(-)
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index be3c221..c35084a 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1289,14 +1289,6 @@ other_irq:
return ret;
}
-static void sh_eth_timer(unsigned long data)
-{
- struct net_device *ndev = (struct net_device *)data;
- struct sh_eth_private *mdp = netdev_priv(ndev);
-
- mod_timer(&mdp->timer, jiffies + (10 * HZ));
-}
-
/* PHY state control function */
static void sh_eth_adjust_link(struct net_device *ndev)
{
@@ -1544,11 +1536,6 @@ static int sh_eth_open(struct net_device *ndev)
if (ret)
goto out_free_irq;
- /* Set the timer to check for link beat. */
- init_timer(&mdp->timer);
- mdp->timer.expires = (jiffies + (24 * HZ)) / 10;/* 2.4 sec. */
- setup_timer(&mdp->timer, sh_eth_timer, (unsigned long)ndev);
-
return ret;
out_free_irq:
@@ -1573,9 +1560,6 @@ static void sh_eth_tx_timeout(struct net_device *ndev)
/* tx_errors count up */
ndev->stats.tx_errors++;
- /* timer off */
- del_timer_sync(&mdp->timer);
-
/* Free all the skbuffs in the Rx queue. */
for (i = 0; i < RX_RING_SIZE; i++) {
rxdesc = &mdp->rx_ring[i];
@@ -1593,10 +1577,6 @@ static void sh_eth_tx_timeout(struct net_device *ndev)
/* device init */
sh_eth_dev_init(ndev);
-
- /* timer on */
- mdp->timer.expires = (jiffies + (24 * HZ)) / 10;/* 2.4 sec. */
- add_timer(&mdp->timer);
}
/* Packet transmit function */
@@ -1669,8 +1649,6 @@ static int sh_eth_close(struct net_device *ndev)
free_irq(ndev->irq, ndev);
- del_timer_sync(&mdp->timer);
-
/* Free all the skbuffs in the Rx queue. */
sh_eth_ring_free(ndev);
diff --git a/drivers/net/ethernet/renesas/sh_eth.h b/drivers/net/ethernet/renesas/sh_eth.h
index 57b8e1f..9e8e4d5 100644
--- a/drivers/net/ethernet/renesas/sh_eth.h
+++ b/drivers/net/ethernet/renesas/sh_eth.h
@@ -771,7 +771,6 @@ struct sh_eth_private {
struct sh_eth_txdesc *tx_ring;
struct sk_buff **rx_skbuff;
struct sk_buff **tx_skbuff;
- struct timer_list timer;
spinlock_t lock;
u32 cur_rx, dirty_rx; /* Producer/consumer ring indices */
u32 cur_tx, dirty_tx;
--
1.7.1
next reply other threads:[~2012-05-29 8:14 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-29 8:14 Shimoda, Yoshihiro [this message]
2012-05-29 8:14 ` [PATCH v5 1/6] net: sh_eth: remove unnecessary function Shimoda, Yoshihiro
2012-05-29 8:17 ` David Miller
2012-05-29 8:17 ` David Miller
2012-05-29 8:47 ` Shimoda, Yoshihiro
2012-05-29 8:47 ` Shimoda, Yoshihiro
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FC48570.8040204@renesas.com \
--to=yoshihiro.shimoda.uh@renesas.com \
--cc=linux-sh@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.