Query about: ARM11 MPCore: preemption/task migration cache coherency

[bill4carson@gmail.com (bill4carson)]

On 2012?05?31? 11:19, Catalin Marinas wrote:
> On Thu, May 31, 2012 at 04:11:46AM +0100, bill4carson wrote:
>> On 2012?05?31? 11:00, Catalin Marinas wrote:
>>> On Wed, May 30, 2012 at 11:01:59AM +0100, bill4carson wrote:
>>>> On 2012?05?30? 14:38, Will Deacon wrote:
>>>>> On Tue, May 29, 2012 at 06:28:11AM +0100, bill4carson wrote:
>>>>>> --- a/arch/arm/mm/cache-v6.S
>>>>>> +++ b/arch/arm/mm/cache-v6.S
>>>>>> @@ -170,6 +170,10 @@ ENDPROC(v6_coherent_kern_range)
>>>>>>      ENTRY(v6_flush_kern_dcache_area)
>>>>>>             add     r1, r0, r1
>>>>>>      1:
>>>>>> +#ifdef CONFIG_SMP
>>>>>> +       ldr     r2, [r0]                        @ read for ownership
>>>>>> +       str     r2, [r0]                        @ write for ownership
>>>>>> +#endif /* CONFIG_SMP */
>>>>>>      #ifdef HARVARD_CACHE
>>>>>>             mcr     p15, 0, r0, c7, c14, 1          @ clean&    invalidate D line
>>>>>>      #else
>>>>>
>>>>> I don't think the invalidation is needed here, so you probably don't need to
>>>>> hack this function at all.
>>> ...
>>>> 1. task t runs on CPU 0, it executes one program in nand flash,
>>>>       so first task t read *part* of this program into its local Dcache,
>>>>       let's call it part_a;
>>>>
>>>> 2. task t migrates from CPU0 onto CPU1, in there reads the rest of
>>>>       program into its local Dcache, label it part_b;
>>>>
>>>> 3. on CPU1, task t flush the whole address range of this program,
>>>>       As with ARM11 MPCore, this flush is locally effective, after flush
>>>>       part_a still resides in CPU0 L1 Dcache.
>>>>
>>>> 4. When this program gets executed, CPU 1 fetch its instructions from
>>>>       Icache, SCU will notice this action,
>>>>
>>>>       Question:
>>>>       At this point, is stale part_a in main memory *or* L1 Dcache part_a
>>>>       in CPU0 routed into CPU1 as instruction?
>>>
>>> This has been discussed in the past. The first thing is to disable
>>> CONFIG_PREEMPT to make sure you are not preempted between page copying
>>> and task execution. The code doing the page copy needs to call
>>> flush_dcache_page() on the CPU where the copy occurred and Linux does a
>>> non-lazy D-cache flush. But there are many situations where Linux
>>> doesn't do this (you can google for flush_dcache_page and my name to
>>> find a few places where I tried to fix this).
>>
>> Thanks:)
>
> BTW, see this as a starting point (and a hack):
>
> http://article.gmane.org/gmane.linux.ports.arm.kernel/51556


I think we has some mis-understanding here :(

As for:v6_flush_kern_dcache_area/v6_flush_kern_dcache_all
these two hooks is supposed to be globally effective, *not*
locally!

Hence, there should below fix to make it as globally effective.

+#ifdef CONFIG_SMP
+       ldr     r2, [r0]                        @ read for ownership
+       str     r2, [r0]                        @ write for ownership
+#endif /* CONFIG_SMP */

Or there maybe some other better solution for this issue.


thanks

-- 
Love each day!

--bill