From: Jonathan Cameron <jic23@kernel.org>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: Jonathan Cameron <jic23@cam.ac.uk>, linux-iio@vger.kernel.org
Subject: Re: [PATCH 9/9] staging:iio:adc:ad799x: Use new triggered buffer setup helper function
Date: Thu, 07 Jun 2012 21:18:17 +0100 [thread overview]
Message-ID: <4FD10C89.8080506@kernel.org> (raw)
In-Reply-To: <1338983756-31243-10-git-send-email-lars@metafoo.de>
On 06/06/2012 12:55 PM, Lars-Peter Clausen wrote:
> Use the new triggered buffer setup helper function to allocate and register
> buffer and pollfunc.
>
> Also as part of the conversion drop scan_timestamp being enabled by default,
> since it is a left over of an earlier cleanup.
>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jonathan Cameron <jic23@kernel.org>
> ---
> drivers/staging/iio/adc/Kconfig | 1 +
> drivers/staging/iio/adc/ad799x.h | 2 --
> drivers/staging/iio/adc/ad799x_core.c | 25 +++++++------
> drivers/staging/iio/adc/ad799x_ring.c | 63 ++-------------------------------
> 4 files changed, 19 insertions(+), 72 deletions(-)
>
> diff --git a/drivers/staging/iio/adc/Kconfig b/drivers/staging/iio/adc/Kconfig
> index 36cca0e..6fa3264 100644
> --- a/drivers/staging/iio/adc/Kconfig
> +++ b/drivers/staging/iio/adc/Kconfig
> @@ -66,6 +66,7 @@ config AD799X_RING_BUFFER
> depends on AD799X
> select IIO_BUFFER
> select IIO_KFIFO_BUF
> + select IIO_TRIGGERED_BUFFER
> help
> Say yes here to include ring buffer support in the AD799X
> ADC driver.
> diff --git a/drivers/staging/iio/adc/ad799x.h b/drivers/staging/iio/adc/ad799x.h
> index 99f8abe..3e363c4 100644
> --- a/drivers/staging/iio/adc/ad799x.h
> +++ b/drivers/staging/iio/adc/ad799x.h
> @@ -120,8 +120,6 @@ struct ad799x_platform_data {
> u16 vref_mv;
> };
>
> -int ad7997_8_set_scan_mode(struct ad799x_state *st, unsigned mask);
> -
> #ifdef CONFIG_AD799X_RING_BUFFER
> int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev);
> void ad799x_ring_cleanup(struct iio_dev *indio_dev);
> diff --git a/drivers/staging/iio/adc/ad799x_core.c b/drivers/staging/iio/adc/ad799x_core.c
> index 80e0c6e..2d4bda9 100644
> --- a/drivers/staging/iio/adc/ad799x_core.c
> +++ b/drivers/staging/iio/adc/ad799x_core.c
> @@ -99,10 +99,21 @@ static int ad799x_i2c_write8(struct ad799x_state *st, u8 reg, u8 data)
> return ret;
> }
>
> -int ad7997_8_set_scan_mode(struct ad799x_state *st, unsigned mask)
> +static int ad7997_8_update_scan_mode(struct iio_dev *indio_dev,
> + const unsigned long *scan_mask)
> {
> - return ad799x_i2c_write16(st, AD7998_CONF_REG,
> - st->config | (mask << AD799X_CHANNEL_SHIFT));
> + struct ad799x_state *st = iio_priv(indio_dev);
> +
> + switch (st->id) {
> + case ad7997:
> + case ad7998:
> + return ad799x_i2c_write16(st, AD7998_CONF_REG,
> + st->config | (*scan_mask << AD799X_CHANNEL_SHIFT));
> + default:
> + break;
> + }
> +
> + return 0;
> }
>
> static int ad799x_scan_direct(struct ad799x_state *st, unsigned ch)
> @@ -442,6 +453,7 @@ static const struct iio_info ad7993_4_7_8_info = {
> .read_event_value = &ad799x_read_event_value,
> .write_event_value = &ad799x_write_event_value,
> .driver_module = THIS_MODULE,
> + .update_scan_mode = ad7997_8_update_scan_mode,
> };
>
> #define AD799X_EV_MASK (IIO_EV_BIT(IIO_EV_TYPE_THRESH, IIO_EV_DIR_RISING) | \
> @@ -887,12 +899,6 @@ static int __devinit ad799x_probe(struct i2c_client *client,
> if (ret)
> goto error_disable_reg;
>
> - ret = iio_buffer_register(indio_dev,
> - indio_dev->channels,
> - indio_dev->num_channels);
> - if (ret)
> - goto error_cleanup_ring;
> -
> if (client->irq > 0) {
> ret = request_threaded_irq(client->irq,
> NULL,
> @@ -934,7 +940,6 @@ static __devexit int ad799x_remove(struct i2c_client *client)
> if (client->irq > 0)
> free_irq(client->irq, indio_dev);
>
> - iio_buffer_unregister(indio_dev);
> ad799x_ring_cleanup(indio_dev);
> if (!IS_ERR(st->reg)) {
> regulator_disable(st->reg);
> diff --git a/drivers/staging/iio/adc/ad799x_ring.c b/drivers/staging/iio/adc/ad799x_ring.c
> index 1c7ff44..da8d468 100644
> --- a/drivers/staging/iio/adc/ad799x_ring.c
> +++ b/drivers/staging/iio/adc/ad799x_ring.c
> @@ -24,27 +24,6 @@
> #include "ad799x.h"
>
> /**
> - * ad799x_ring_preenable() setup the parameters of the ring before enabling
> - *
> - * The complex nature of the setting of the number of bytes per datum is due
> - * to this driver currently ensuring that the timestamp is stored at an 8
> - * byte boundary.
> - **/
> -static int ad799x_ring_preenable(struct iio_dev *indio_dev)
> -{
> - struct ad799x_state *st = iio_priv(indio_dev);
> - /*
> - * Need to figure out the current mode based upon the requested
> - * scan mask in iio_dev
> - */
> -
> - if (st->id == ad7997 || st->id == ad7998)
> - ad7997_8_set_scan_mode(st, *indio_dev->active_scan_mask);
> -
> - return iio_sw_buffer_preenable(indio_dev);
> -}
> -
> -/**
> * ad799x_trigger_handler() bh of trigger launched polling to ring buffer
> *
> * Currently there is no option in this driver to disable the saving of
> @@ -110,49 +89,13 @@ out:
> return IRQ_HANDLED;
> }
>
> -static const struct iio_buffer_setup_ops ad799x_buf_setup_ops = {
> - .preenable = &ad799x_ring_preenable,
> - .postenable = &iio_triggered_buffer_postenable,
> - .predisable = &iio_triggered_buffer_predisable,
> -};
> -
> int ad799x_register_ring_funcs_and_init(struct iio_dev *indio_dev)
> {
> - int ret = 0;
> -
> - indio_dev->buffer = iio_kfifo_allocate(indio_dev);
> - if (!indio_dev->buffer) {
> - ret = -ENOMEM;
> - goto error_ret;
> - }
> - indio_dev->pollfunc = iio_alloc_pollfunc(NULL,
> - &ad799x_trigger_handler,
> - IRQF_ONESHOT,
> - indio_dev,
> - "%s_consumer%d",
> - indio_dev->name,
> - indio_dev->id);
> - if (indio_dev->pollfunc == NULL) {
> - ret = -ENOMEM;
> - goto error_deallocate_kfifo;
> - }
> -
> - /* Ring buffer functions - here trigger setup related */
> - indio_dev->setup_ops = &ad799x_buf_setup_ops;
> - indio_dev->buffer->scan_timestamp = true;
> -
> - /* Flag that polled ring buffering is possible */
> - indio_dev->modes |= INDIO_BUFFER_TRIGGERED;
> - return 0;
> -
> -error_deallocate_kfifo:
> - iio_kfifo_free(indio_dev->buffer);
> -error_ret:
> - return ret;
> + return iio_triggered_buffer_setup(indio_dev, NULL,
> + &ad799x_trigger_handler, NULL);
> }
>
> void ad799x_ring_cleanup(struct iio_dev *indio_dev)
> {
> - iio_dealloc_pollfunc(indio_dev->pollfunc);
> - iio_kfifo_free(indio_dev->buffer);
> + iio_triggered_buffer_cleanup(indio_dev);
> }
prev parent reply other threads:[~2012-06-07 20:18 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-06 11:55 [PATCH 0/9] iio: Add helper function for initializing triggered buffers Lars-Peter Clausen
2012-06-06 11:55 ` [PATCH 1/9] staging:iio: " Lars-Peter Clausen
2012-06-07 19:09 ` Jonathan Cameron
2012-06-08 7:47 ` Lars-Peter Clausen
2012-06-06 11:55 ` [PATCH 2/9] iio:adc:at91: Use new triggered buffer setup helper Lars-Peter Clausen
2012-06-07 20:02 ` Jonathan Cameron
2012-06-08 7:57 ` Lars-Peter Clausen
2012-06-08 7:59 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 3/9] staging:iio:adc:ad7192: Use new triggered buffer setup helper function Lars-Peter Clausen
2012-06-07 20:06 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 4/9] staging:iio:adc:ad7298: " Lars-Peter Clausen
2012-06-07 20:11 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 5/9] staging:iio:adc:ad7476: " Lars-Peter Clausen
2012-06-07 20:12 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 6/9] staging:iio:adc:ad7606: " Lars-Peter Clausen
2012-06-07 20:13 ` Jonathan Cameron
2012-06-07 20:14 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 7/9] staging:iio:adc:ad7793: " Lars-Peter Clausen
2012-06-07 20:14 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 8/9] staging:iio:adc:ad7887: " Lars-Peter Clausen
2012-06-07 20:15 ` Jonathan Cameron
2012-06-06 11:55 ` [PATCH 9/9] staging:iio:adc:ad799x: " Lars-Peter Clausen
2012-06-07 20:18 ` Jonathan Cameron [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FD10C89.8080506@kernel.org \
--to=jic23@kernel.org \
--cc=jic23@cam.ac.uk \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.