* [ath9k-devel] Low throughput AR9280 HT40+
@ 2012-06-13 1:58 Stephen Donecker
0 siblings, 0 replies; only message in thread
From: Stephen Donecker @ 2012-06-13 1:58 UTC (permalink / raw)
To: ath9k-devel
Hi,
I appear to be getting lower throughput than I should be between two
single stream adhoc nodes (~78Mbps UDP). Shouldn't I be getting closer
to ~128Mbps? Could someone explain why such a high ratio of lost
datagrams? When looking through the list the vast majority of people get
a very small datagram loss.
Hardware:
Ubiquity Routerstation (AR7161)
Ubiquity SR71-15 (AR9280)
OpenWRT r32062 (linux-3.3.8, compat-wireless-2012-05-29)
Config:
# cat /sys/kernel/debug/ieee80211/phy0/frequency
5785
# cat /sys/kernel/debug/ieee80211/phy0/channel_type
ht40+
# cat /sys/kernel/debug/ieee80211/phy0/ath9k/tx_chainmask
0x00000001
# cat /sys/kernel/debug/ieee80211/phy0/ath9k/rx_chainmask
0x00000001
Throughput test:
# iperf -c 192.168.11.2 -p 7777 -u -b 150m -t 10 -i 1
------------------------------------------------------------
Client connecting to 192.168.11.2, UDP port 7777
Sending 1470 byte datagrams
UDP buffer size: 160 KByte (default)
------------------------------------------------------------
[ 3] local 192.168.11.1 port 47537 connected with 192.168.11.2 port 7777
[ ID] Interval Transfer Bandwidth
[ 3] 0.0- 1.0 sec 15.3 MBytes 128 Mbits/sec
[ 3] 1.0- 2.0 sec 15.1 MBytes 126 Mbits/sec
[ 3] 2.0- 3.0 sec 15.3 MBytes 128 Mbits/sec
[ 3] 3.0- 4.0 sec 15.3 MBytes 128 Mbits/sec
[ 3] 4.0- 5.0 sec 15.4 MBytes 129 Mbits/sec
[ 3] 5.0- 6.0 sec 15.3 MBytes 129 Mbits/sec
[ 3] 6.0- 7.0 sec 15.3 MBytes 128 Mbits/sec
[ 3] 7.0- 8.0 sec 15.2 MBytes 128 Mbits/sec
[ 3] 8.0- 9.0 sec 15.3 MBytes 128 Mbits/sec
[ 3] 0.0-10.0 sec 153 MBytes 128 Mbits/sec
[ 3] Sent 108972 datagrams
[ 3] Server Report:
[ 3] 0.0-10.0 sec 92.9 MBytes 77.8 Mbits/sec 0.243 ms 42715/108973
(39%)
# iw dev wlan0 station dump
Station 00:15:6d:85:0f:78 (on wlan0)
inactive time: 170 ms
rx bytes: 102078921
rx packets: 85286
tx bytes: 1412173463
tx packets: 921845
tx retries: 209
tx failed: 0
signal: -56 [-56] dBm
signal avg: -55 [-55] dBm
tx bitrate: 150.0 MBit/s MCS 7 40Mhz short GI
rx bitrate: 150.0 MBit/s MCS 7 40Mhz short GI
authorized: yes
authenticated: yes
preamble: long
WMM/WME: yes
MFP: no
TDLS peer: no
Thanks,
-Stephen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.ath9k.org/pipermail/ath9k-devel/attachments/20120612/74d1449d/attachment-0001.htm
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2012-06-13 1:58 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-06-13 1:58 [ath9k-devel] Low throughput AR9280 HT40+ Stephen Donecker
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.