All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rajendra Nayak <rnayak@ti.com>
To: Jean Pihet <jean.pihet@newoldbits.com>
Cc: Kevin Hilman <khilman@ti.com>,
	Grazvydas Ignotas <notasas@gmail.com>,
	linux-omap@vger.kernel.org, Jean Pihet <j-pihet@ti.com>
Subject: Re: [PATCH 3/3] ARM: OMAP3: PM: cpuidle: optimize the clkdm idle latency in C1 state
Date: Wed, 20 Jun 2012 13:49:52 +0530	[thread overview]
Message-ID: <4FE187A8.8060203@ti.com> (raw)
In-Reply-To: <1338563468-31403-4-git-send-email-j-pihet@ti.com>

Hi Jean,

On Friday 01 June 2012 08:41 PM, Jean Pihet wrote:
> For a power domain to idle all the clock domains in it must idle.
> This patch implements an optimization of the cpuidle code by
> denying and later allowing only the first registered clock domain
> of a power domain, and so optimizes the latency of the low power code.

How much do we really save doing this? I understand what you are doing
by looking at the patch but the changelog seems very confusing.
What the patch does is get rid of a few function indirection
and assumes there is only *one* clkdm for mpu and core. Is that right?

regards,
Rajendra

>
> The functions _cpuidle_allow_idle and _cpuidle_deny_idle are
> not used anymore and so are removed.
>
> Signed-off-by: Jean Pihet<j-pihet@ti.com>
> ---
>   arch/arm/mach-omap2/cpuidle34xx.c |   22 ++++------------------
>   1 files changed, 4 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
> index 2e2f1c6..e6ae3fe 100644
> --- a/arch/arm/mach-omap2/cpuidle34xx.c
> +++ b/arch/arm/mach-omap2/cpuidle34xx.c
> @@ -77,20 +77,6 @@ static struct omap3_idle_statedata omap3_idle_data[] = {
>
>   static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
>
> -static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
> -				struct clockdomain *clkdm)
> -{
> -	clkdm_allow_idle(clkdm);
> -	return 0;
> -}
> -
> -static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
> -				struct clockdomain *clkdm)
> -{
> -	clkdm_deny_idle(clkdm);
> -	return 0;
> -}
> -
>   static int __omap3_enter_idle(struct cpuidle_device *dev,
>   				struct cpuidle_driver *drv,
>   				int index)
> @@ -108,8 +94,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
>
>   	/* Deny idle for C1 */
>   	if (index == 0) {
> -		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
> -		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
> +		clkdm_deny_idle(mpu_pd->pwrdm_clkdms[0]);
> +		clkdm_deny_idle(core_pd->pwrdm_clkdms[0]);
>   	}
>
>   	/*
> @@ -131,8 +117,8 @@ static int __omap3_enter_idle(struct cpuidle_device *dev,
>
>   	/* Re-allow idle for C1 */
>   	if (index == 0) {
> -		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
> -		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
> +		clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]);
> +		clkdm_allow_idle(core_pd->pwrdm_clkdms[0]);
>   	}
>
>   return_sleep_time:


  reply	other threads:[~2012-06-20  8:20 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-06-01 15:11 [PATCH 0/3] ARM: OMAP3: PM: optimize cpuidle C1 state latency Jean Pihet
2012-06-01 15:11 ` [PATCH 1/3] ARM: OMAP3: PM: cpuidle: default to C1 in next_valid_state Jean Pihet
2012-06-01 15:11 ` [PATCH 2/3] ARM: OMAP3: PM: cpuidle: optimize the PER latency in C1 state Jean Pihet
2012-06-01 15:11 ` [PATCH 3/3] ARM: OMAP3: PM: cpuidle: optimize the clkdm idle " Jean Pihet
2012-06-20  8:19   ` Rajendra Nayak [this message]
2012-06-20  8:31     ` Jean Pihet
2012-06-20  8:46       ` Rajendra Nayak
2012-06-20  8:52         ` Rajendra Nayak
2012-06-20  8:57           ` Rajendra Nayak
2012-06-20 11:34             ` Jean Pihet
2012-06-28 18:03               ` Kevin Hilman
2012-06-01 16:26 ` [PATCH 0/3] ARM: OMAP3: PM: optimize cpuidle C1 state latency Kevin Hilman
2012-06-01 16:29   ` Jean Pihet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FE187A8.8060203@ti.com \
    --to=rnayak@ti.com \
    --cc=j-pihet@ti.com \
    --cc=jean.pihet@newoldbits.com \
    --cc=khilman@ti.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=notasas@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.