All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
To: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: netdev <netdev@vger.kernel.org>, SH-Linux <linux-sh@vger.kernel.org>
Subject: Re: [PATCH] net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens
Date: Thu, 21 Jun 2012 01:26:34 +0000	[thread overview]
Message-ID: <4FE2784A.70208@renesas.com> (raw)
In-Reply-To: <Pine.LNX.4.64.1206201507260.20254@axis700.grange>

Hello Guennadi-san,

2012/06/20 22:10, Guennadi Liakhovetski wrote:
> Hello Shimoda-san
> 
> On Tue, 29 May 2012, Shimoda, Yoshihiro wrote:
> 
>> When Receive Descriptor Empty happens, rxdesc pointer of the driver
>> and actual next descriptor of the controller may be mismatch.
>> This patch fixes it.
> 
> Unfortunately, this patch breaks networking on ecovec (sh7724). Booting 
> with dhcp and NFS-root progresses very slowly with lots of "nfs: server 
> not responding / Ok" messages and never completes. Reverting it in current 
> Linus' tree fixes the problem.

Thank you very much for the report.
The SH7724 doesn't set the RMCR register. So, the EDRRR will be clear after
the controller receives a freme every time.
So, the "fix the rxdesc pointer" had to check a condition.

I wrote a patch for the issue as the following.
If possible, would you try the patch?

Best regards,
Yoshihiro Shimoda
---
Subject: [PATCH] net: sh_eth: fix the condition to fix the cur_tx/dirty_rx

The following commit couldn't work if the RMCR is not set to 1.

"net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens"
commit id 79fba9f51755c704c0a7d7b7f0df10874dc0a744

If RMCR is not set, the controller will clear the EDRRR after it received
a frame. In this case, the driver doesn't need to fix the value of
cur_rx/dirty_rx. The driver only needs it when the controll detects
receive descriptors are empty.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/net/ethernet/renesas/sh_eth.c |   12 +++++++-----
 1 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 667169b..79bf09b 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1011,7 +1011,7 @@ static int sh_eth_txfree(struct net_device *ndev)
 }

 /* Packet receive function */
-static int sh_eth_rx(struct net_device *ndev)
+static int sh_eth_rx(struct net_device *ndev, u32 intr_status)
 {
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	struct sh_eth_rxdesc *rxdesc;
@@ -1102,9 +1102,11 @@ static int sh_eth_rx(struct net_device *ndev)
 	/* Restart Rx engine if stopped. */
 	/* If we don't need to check status, don't. -KDU */
 	if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) {
-		/* fix the values for the next receiving */
-		mdp->cur_rx = mdp->dirty_rx = (sh_eth_read(ndev, RDFAR) -
-					       sh_eth_read(ndev, RDLAR)) >> 4;
+		/* fix the values for the next receiving if RDE is set */
+		if (intr_status & EESR_RDE)
+			mdp->cur_rx = mdp->dirty_rx +				(sh_eth_read(ndev, RDFAR) -
+				 sh_eth_read(ndev, RDLAR)) >> 4;
 		sh_eth_write(ndev, EDRRR_R, EDRRR);
 	}

@@ -1273,7 +1275,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 			EESR_RTSF | /* short frame recv */
 			EESR_PRE  | /* PHY-LSI recv error */
 			EESR_CERF)){ /* recv frame CRC error */
-		sh_eth_rx(ndev);
+		sh_eth_rx(ndev, intr_status);
 	}

 	/* Tx Check */
-- 
1.7.1


WARNING: multiple messages have this Message-ID (diff)
From: "Shimoda, Yoshihiro" <yoshihiro.shimoda.uh@renesas.com>
To: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Cc: netdev <netdev@vger.kernel.org>, SH-Linux <linux-sh@vger.kernel.org>
Subject: Re: [PATCH] net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens
Date: Thu, 21 Jun 2012 10:26:34 +0900	[thread overview]
Message-ID: <4FE2784A.70208@renesas.com> (raw)
In-Reply-To: <Pine.LNX.4.64.1206201507260.20254@axis700.grange>

Hello Guennadi-san,

2012/06/20 22:10, Guennadi Liakhovetski wrote:
> Hello Shimoda-san
> 
> On Tue, 29 May 2012, Shimoda, Yoshihiro wrote:
> 
>> When Receive Descriptor Empty happens, rxdesc pointer of the driver
>> and actual next descriptor of the controller may be mismatch.
>> This patch fixes it.
> 
> Unfortunately, this patch breaks networking on ecovec (sh7724). Booting 
> with dhcp and NFS-root progresses very slowly with lots of "nfs: server 
> not responding / Ok" messages and never completes. Reverting it in current 
> Linus' tree fixes the problem.

Thank you very much for the report.
The SH7724 doesn't set the RMCR register. So, the EDRRR will be clear after
the controller receives a freme every time.
So, the "fix the rxdesc pointer" had to check a condition.

I wrote a patch for the issue as the following.
If possible, would you try the patch?

Best regards,
Yoshihiro Shimoda
---
Subject: [PATCH] net: sh_eth: fix the condition to fix the cur_tx/dirty_rx

The following commit couldn't work if the RMCR is not set to 1.

"net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens"
commit id 79fba9f51755c704c0a7d7b7f0df10874dc0a744

If RMCR is not set, the controller will clear the EDRRR after it received
a frame. In this case, the driver doesn't need to fix the value of
cur_rx/dirty_rx. The driver only needs it when the controll detects
receive descriptors are empty.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/net/ethernet/renesas/sh_eth.c |   12 +++++++-----
 1 files changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 667169b..79bf09b 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -1011,7 +1011,7 @@ static int sh_eth_txfree(struct net_device *ndev)
 }

 /* Packet receive function */
-static int sh_eth_rx(struct net_device *ndev)
+static int sh_eth_rx(struct net_device *ndev, u32 intr_status)
 {
 	struct sh_eth_private *mdp = netdev_priv(ndev);
 	struct sh_eth_rxdesc *rxdesc;
@@ -1102,9 +1102,11 @@ static int sh_eth_rx(struct net_device *ndev)
 	/* Restart Rx engine if stopped. */
 	/* If we don't need to check status, don't. -KDU */
 	if (!(sh_eth_read(ndev, EDRRR) & EDRRR_R)) {
-		/* fix the values for the next receiving */
-		mdp->cur_rx = mdp->dirty_rx = (sh_eth_read(ndev, RDFAR) -
-					       sh_eth_read(ndev, RDLAR)) >> 4;
+		/* fix the values for the next receiving if RDE is set */
+		if (intr_status & EESR_RDE)
+			mdp->cur_rx = mdp->dirty_rx =
+				(sh_eth_read(ndev, RDFAR) -
+				 sh_eth_read(ndev, RDLAR)) >> 4;
 		sh_eth_write(ndev, EDRRR_R, EDRRR);
 	}

@@ -1273,7 +1275,7 @@ static irqreturn_t sh_eth_interrupt(int irq, void *netdev)
 			EESR_RTSF | /* short frame recv */
 			EESR_PRE  | /* PHY-LSI recv error */
 			EESR_CERF)){ /* recv frame CRC error */
-		sh_eth_rx(ndev);
+		sh_eth_rx(ndev, intr_status);
 	}

 	/* Tx Check */
-- 
1.7.1


  reply	other threads:[~2012-06-21  1:26 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-29  9:07 [PATCH] net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens Shimoda, Yoshihiro
2012-05-29  9:07 ` Shimoda, Yoshihiro
2012-05-29 21:23 ` David Miller
2012-05-29 21:23   ` David Miller
2012-06-20 13:10 ` Guennadi Liakhovetski
2012-06-20 13:10   ` Guennadi Liakhovetski
2012-06-21  1:26   ` Shimoda, Yoshihiro [this message]
2012-06-21  1:26     ` Shimoda, Yoshihiro
2012-06-22 14:16     ` Guennadi Liakhovetski
2012-06-22 14:16       ` Guennadi Liakhovetski
2012-06-23  4:51       ` David Miller
2012-06-23  4:51         ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4FE2784A.70208@renesas.com \
    --to=yoshihiro.shimoda.uh@renesas.com \
    --cc=g.liakhovetski@gmx.de \
    --cc=linux-sh@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.