From: Jan Kiszka <jan.kiszka@siemens.com>
To: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Alex Williamson <alex.williamson@redhat.com>,
"qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
"kvm-ppc@vger.kernel.org" <kvm-ppc@vger.kernel.org>
Subject: Re: [PATCH] msi/msix: added functions to API to set up message address, and data
Date: Thu, 21 Jun 2012 06:53:14 +0000 [thread overview]
Message-ID: <4FE2C4DA.40403@siemens.com> (raw)
In-Reply-To: <4FE2C33E.1080808@ozlabs.ru>
On 2012-06-21 08:46, Alexey Kardashevskiy wrote:
>
> Ok, another try. Is it any better now? :)
No - posted the old version accidentally?
Jan
>
>
> Normally QEMU expects the guest to initialize MSI/MSIX vectors.
> However on POWER the guest uses RTAS subsystem to configure MSI/MSIX and
> does not write these vectors to device's config space or MSIX BAR.
>
> On the other hand, msi_notify()/msix_notify() write to these vectors to
> signal the guest about an interrupt so we have to write correct vectors
> to the devices in order not to change every user of MSI/MSIX.
>
> The first aim is to support MSIX for virtio-pci on POWER. There is
> another patch for POWER coming which introduces a special memory region
> where MSI/MSIX vectors point to.
>
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
> hw/msi.c | 14 ++++++++++++++
> hw/msi.h | 1 +
> hw/msix.c | 8 ++++++++
> hw/msix.h | 3 +++
> 4 files changed, 26 insertions(+)
>
> diff --git a/hw/msi.c b/hw/msi.c
> index 5233204..c7b3e6a 100644
> --- a/hw/msi.c
> +++ b/hw/msi.c
> @@ -363,3 +363,17 @@ unsigned int msi_nr_vectors_allocated(const PCIDevice *dev)
> uint16_t flags = pci_get_word(dev->config + msi_flags_off(dev));
> return msi_nr_vectors(flags);
> }
> +
> +void msi_set_address_data(PCIDevice *dev, uint64_t address, uint16_t data)
> +{
> + uint16_t flags = pci_get_word(dev->config + msi_flags_off(dev));
> + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT;
> +
> + if (msi64bit) {
> + pci_set_quad(dev->config + msi_address_lo_off(dev), address);
> + } else {
> + pci_set_long(dev->config + msi_address_lo_off(dev), address);
> + }
> + pci_set_word(dev->config + msi_data_off(dev, msi64bit), data);
> +}
> +
> diff --git a/hw/msi.h b/hw/msi.h
> index 75747ab..353386e 100644
> --- a/hw/msi.h
> +++ b/hw/msi.h
> @@ -39,6 +39,7 @@ void msi_reset(PCIDevice *dev);
> void msi_notify(PCIDevice *dev, unsigned int vector);
> void msi_write_config(PCIDevice *dev, uint32_t addr, uint32_t val, int len);
> unsigned int msi_nr_vectors_allocated(const PCIDevice *dev);
> +void msi_set_address_data(PCIDevice *dev, uint64_t address, uint16_t data);
>
> static inline bool msi_present(const PCIDevice *dev)
> {
> diff --git a/hw/msix.c b/hw/msix.c
> index ded3c55..08e773d 100644
> --- a/hw/msix.c
> +++ b/hw/msix.c
> @@ -526,3 +526,11 @@ void msix_unset_vector_notifiers(PCIDevice *dev)
> dev->msix_vector_use_notifier = NULL;
> dev->msix_vector_release_notifier = NULL;
> }
> +void msix_set_address_data(PCIDevice *dev, int vector,
> + uint64_t address, uint32_t data)
> +{
> + uint8_t *table_entry = dev->msix_table_page + vector * PCI_MSIX_ENTRY_SIZE;
> + pci_set_quad(table_entry + PCI_MSIX_ENTRY_LOWER_ADDR, address);
> + pci_set_long(table_entry + PCI_MSIX_ENTRY_DATA, data);
> + table_entry[PCI_MSIX_ENTRY_VECTOR_CTRL] &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT;
> +}
> diff --git a/hw/msix.h b/hw/msix.h
> index 50aee82..901f101 100644
> --- a/hw/msix.h
> +++ b/hw/msix.h
> @@ -35,4 +35,7 @@ int msix_set_vector_notifiers(PCIDevice *dev,
> MSIVectorUseNotifier use_notifier,
> MSIVectorReleaseNotifier release_notifier);
> void msix_unset_vector_notifiers(PCIDevice *dev);
> +void msix_set_address_data(PCIDevice *dev, int vector,
> + uint64_t address, uint32_t data);
> +
> #endif
>
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
WARNING: multiple messages have this Message-ID (diff)
From: Jan Kiszka <jan.kiszka@siemens.com>
To: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Alex Williamson <alex.williamson@redhat.com>,
"qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
"kvm-ppc@vger.kernel.org" <kvm-ppc@vger.kernel.org>
Subject: Re: [Qemu-devel] [PATCH] msi/msix: added functions to API to set up message address, and data
Date: Thu, 21 Jun 2012 08:53:14 +0200 [thread overview]
Message-ID: <4FE2C4DA.40403@siemens.com> (raw)
In-Reply-To: <4FE2C33E.1080808@ozlabs.ru>
On 2012-06-21 08:46, Alexey Kardashevskiy wrote:
>
> Ok, another try. Is it any better now? :)
No - posted the old version accidentally?
Jan
>
>
> Normally QEMU expects the guest to initialize MSI/MSIX vectors.
> However on POWER the guest uses RTAS subsystem to configure MSI/MSIX and
> does not write these vectors to device's config space or MSIX BAR.
>
> On the other hand, msi_notify()/msix_notify() write to these vectors to
> signal the guest about an interrupt so we have to write correct vectors
> to the devices in order not to change every user of MSI/MSIX.
>
> The first aim is to support MSIX for virtio-pci on POWER. There is
> another patch for POWER coming which introduces a special memory region
> where MSI/MSIX vectors point to.
>
> Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
> ---
> hw/msi.c | 14 ++++++++++++++
> hw/msi.h | 1 +
> hw/msix.c | 8 ++++++++
> hw/msix.h | 3 +++
> 4 files changed, 26 insertions(+)
>
> diff --git a/hw/msi.c b/hw/msi.c
> index 5233204..c7b3e6a 100644
> --- a/hw/msi.c
> +++ b/hw/msi.c
> @@ -363,3 +363,17 @@ unsigned int msi_nr_vectors_allocated(const PCIDevice *dev)
> uint16_t flags = pci_get_word(dev->config + msi_flags_off(dev));
> return msi_nr_vectors(flags);
> }
> +
> +void msi_set_address_data(PCIDevice *dev, uint64_t address, uint16_t data)
> +{
> + uint16_t flags = pci_get_word(dev->config + msi_flags_off(dev));
> + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT;
> +
> + if (msi64bit) {
> + pci_set_quad(dev->config + msi_address_lo_off(dev), address);
> + } else {
> + pci_set_long(dev->config + msi_address_lo_off(dev), address);
> + }
> + pci_set_word(dev->config + msi_data_off(dev, msi64bit), data);
> +}
> +
> diff --git a/hw/msi.h b/hw/msi.h
> index 75747ab..353386e 100644
> --- a/hw/msi.h
> +++ b/hw/msi.h
> @@ -39,6 +39,7 @@ void msi_reset(PCIDevice *dev);
> void msi_notify(PCIDevice *dev, unsigned int vector);
> void msi_write_config(PCIDevice *dev, uint32_t addr, uint32_t val, int len);
> unsigned int msi_nr_vectors_allocated(const PCIDevice *dev);
> +void msi_set_address_data(PCIDevice *dev, uint64_t address, uint16_t data);
>
> static inline bool msi_present(const PCIDevice *dev)
> {
> diff --git a/hw/msix.c b/hw/msix.c
> index ded3c55..08e773d 100644
> --- a/hw/msix.c
> +++ b/hw/msix.c
> @@ -526,3 +526,11 @@ void msix_unset_vector_notifiers(PCIDevice *dev)
> dev->msix_vector_use_notifier = NULL;
> dev->msix_vector_release_notifier = NULL;
> }
> +void msix_set_address_data(PCIDevice *dev, int vector,
> + uint64_t address, uint32_t data)
> +{
> + uint8_t *table_entry = dev->msix_table_page + vector * PCI_MSIX_ENTRY_SIZE;
> + pci_set_quad(table_entry + PCI_MSIX_ENTRY_LOWER_ADDR, address);
> + pci_set_long(table_entry + PCI_MSIX_ENTRY_DATA, data);
> + table_entry[PCI_MSIX_ENTRY_VECTOR_CTRL] &= ~PCI_MSIX_ENTRY_CTRL_MASKBIT;
> +}
> diff --git a/hw/msix.h b/hw/msix.h
> index 50aee82..901f101 100644
> --- a/hw/msix.h
> +++ b/hw/msix.h
> @@ -35,4 +35,7 @@ int msix_set_vector_notifiers(PCIDevice *dev,
> MSIVectorUseNotifier use_notifier,
> MSIVectorReleaseNotifier release_notifier);
> void msix_unset_vector_notifiers(PCIDevice *dev);
> +void msix_set_address_data(PCIDevice *dev, int vector,
> + uint64_t address, uint32_t data);
> +
> #endif
>
--
Siemens AG, Corporate Technology, CT T DE IT 1
Corporate Competence Center Embedded Linux
next prev parent reply other threads:[~2012-06-21 6:53 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-14 4:29 [PATCH 0/3] adding MSI/MSIX for PCI on POWER Alexey Kardashevskiy
2012-06-14 4:29 ` [Qemu-devel] " Alexey Kardashevskiy
2012-06-14 4:31 ` [PATCH 1/3] msi/msix: added functions to API to set up message address and data Alexey Kardashevskiy
2012-06-14 4:31 ` [Qemu-devel] " Alexey Kardashevskiy
2012-06-14 4:56 ` Alex Williamson
2012-06-14 4:56 ` Alex Williamson
2012-06-14 5:17 ` Alexey Kardashevskiy
2012-06-14 5:17 ` Alexey Kardashevskiy
2012-06-14 5:38 ` Alex Williamson
2012-06-14 5:38 ` Alex Williamson
2012-06-14 5:44 ` Alexey Kardashevskiy
2012-06-14 5:44 ` Alexey Kardashevskiy
2012-06-14 18:37 ` Alex Williamson
2012-06-14 18:37 ` Alex Williamson
2012-06-14 5:45 ` Jan Kiszka
2012-06-14 5:45 ` Jan Kiszka
2012-06-21 6:46 ` [PATCH] msi/msix: added functions to API to set up message address, " Alexey Kardashevskiy
2012-06-21 6:46 ` [Qemu-devel] " Alexey Kardashevskiy
2012-06-21 6:53 ` Jan Kiszka [this message]
2012-06-21 6:53 ` Jan Kiszka
2012-06-21 7:18 ` [PATCH] msi/msix: added public API to set/get MSI " Alexey Kardashevskiy
2012-06-21 7:18 ` [Qemu-devel] " Alexey Kardashevskiy
2012-06-21 7:39 ` Jan Kiszka
2012-06-21 7:39 ` [Qemu-devel] " Jan Kiszka
2012-06-21 10:28 ` Alexey Kardashevskiy
2012-06-21 10:28 ` [Qemu-devel] " Alexey Kardashevskiy
2012-06-21 10:38 ` Jan Kiszka
2012-06-21 10:38 ` [Qemu-devel] " Jan Kiszka
2012-06-21 10:50 ` Alexey Kardashevskiy
2012-06-21 10:50 ` [Qemu-devel] " Alexey Kardashevskiy
2012-06-21 10:56 ` Jan Kiszka
2012-06-21 10:56 ` [Qemu-devel] " Jan Kiszka
2012-06-21 11:39 ` [PATCH] msi/msix: added API to set MSI message address " Alexey Kardashevskiy
2012-06-21 11:39 ` [Qemu-devel] " Alexey Kardashevskiy
2012-06-21 11:49 ` Jan Kiszka
2012-06-21 11:49 ` [Qemu-devel] " Jan Kiszka
2012-06-22 1:03 ` Alexey Kardashevskiy
2012-06-22 1:03 ` [Qemu-devel] " Alexey Kardashevskiy
2012-06-22 1:15 ` Alexey Kardashevskiy
2012-06-22 1:15 ` [Qemu-devel] " Alexey Kardashevskiy
2012-07-02 4:28 ` Alexey Kardashevskiy
2012-07-02 4:28 ` [Qemu-devel] " Alexey Kardashevskiy
2012-07-02 7:24 ` Jan Kiszka
2012-07-02 7:24 ` [Qemu-devel] " Jan Kiszka
2012-07-06 15:36 ` Alexander Graf
2012-07-06 15:36 ` [Qemu-devel] " Alexander Graf
2012-07-06 15:58 ` Jan Kiszka
2012-07-06 15:58 ` [Qemu-devel] " Jan Kiszka
2012-07-11 18:22 ` Alexander Graf
2012-07-11 18:22 ` [Qemu-devel] " Alexander Graf
2012-07-18 12:43 ` Michael S. Tsirkin
2012-07-18 12:43 ` [Qemu-devel] " Michael S. Tsirkin
2012-07-18 13:17 ` Alexey Kardashevskiy
2012-07-18 13:17 ` [Qemu-devel] " Alexey Kardashevskiy
2012-07-18 15:23 ` Michael S. Tsirkin
2012-07-18 15:23 ` [Qemu-devel] " Michael S. Tsirkin
2012-07-19 0:32 ` Alexey Kardashevskiy
2012-07-19 0:32 ` [Qemu-devel] " Alexey Kardashevskiy
2012-07-19 9:27 ` Michael S. Tsirkin
2012-07-19 9:27 ` [Qemu-devel] " Michael S. Tsirkin
2012-07-19 14:24 ` Alexey Kardashevskiy
2012-07-19 14:43 ` Michael S. Tsirkin
2012-07-19 14:50 ` Alexey Kardashevskiy
2012-07-19 14:56 ` Michael S. Tsirkin
2012-07-19 0:35 ` Alexey Kardashevskiy
2012-07-19 9:27 ` Michael S. Tsirkin
2012-06-21 15:44 ` [PATCH] msi/msix: added public API to set/get MSI message address, " Alex Williamson
2012-06-21 15:44 ` [Qemu-devel] " Alex Williamson
2012-06-14 4:33 ` [PATCH 2/3] pseries: added allocator for a block of IRQs Alexey Kardashevskiy
2012-06-14 4:33 ` [Qemu-devel] " Alexey Kardashevskiy
2012-06-27 14:47 ` Alexander Graf
2012-06-14 4:34 ` [PATCH 3/3] pseries pci: added MSI/MSIX support Alexey Kardashevskiy
2012-06-14 4:34 ` [Qemu-devel] " Alexey Kardashevskiy
2012-06-27 18:15 ` Alexander Graf
2012-06-14 4:42 ` [PATCH 0/3] adding MSI/MSIX for PCI on POWER Alexey Kardashevskiy
2012-06-14 4:42 ` [Qemu-devel] " Alexey Kardashevskiy
2012-06-27 14:43 ` Alexander Graf
2012-06-27 21:32 ` Benjamin Herrenschmidt
2012-06-27 21:34 ` Alexander Graf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FE2C4DA.40403@siemens.com \
--to=jan.kiszka@siemens.com \
--cc=aik@ozlabs.ru \
--cc=alex.williamson@redhat.com \
--cc=kvm-ppc@vger.kernel.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.