* [PATCH 1/9] git p4 test: wait longer for p4d to start
2012-06-26 1:18 [PATCH 0/9] git p4 test fixes Pete Wyckoff
@ 2012-06-26 1:18 ` Pete Wyckoff
2012-06-26 3:46 ` Junio C Hamano
2012-06-26 1:18 ` [PATCH 2/9] git p4 test: use real_path to resolve p4 client symlinks Pete Wyckoff
` (7 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: Pete Wyckoff @ 2012-06-26 1:18 UTC (permalink / raw)
To: git
Running tests at high parallelism on a slow machine, 5 sec is
not enough to wait for p4d to start. Change it to 10 sec.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/lib-git-p4.sh | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh
index 121e380..0080eae 100644
--- a/t/lib-git-p4.sh
+++ b/t/lib-git-p4.sh
@@ -37,7 +37,7 @@ start_p4d() {
p4d -q -r "$db" -p $P4DPORT &
echo $! >"$pidfile"
) &&
- for i in 1 2 3 4 5 ; do
+ for i in 1 2 3 4 5 6 7 8 9 10 ; do
p4 info >/dev/null 2>&1 && break || true &&
echo waiting for p4d to start &&
sleep 1
--
1.7.11.rc2.72.gebb7ee5
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH 1/9] git p4 test: wait longer for p4d to start
2012-06-26 1:18 ` [PATCH 1/9] git p4 test: wait longer for p4d to start Pete Wyckoff
@ 2012-06-26 3:46 ` Junio C Hamano
0 siblings, 0 replies; 14+ messages in thread
From: Junio C Hamano @ 2012-06-26 3:46 UTC (permalink / raw)
To: Pete Wyckoff; +Cc: git
Pete Wyckoff <pw@padd.com> writes:
> Running tests at high parallelism on a slow machine, 5 sec is
> not enough to wait for p4d to start. Change it to 10 sec.
>
> Signed-off-by: Pete Wyckoff <pw@padd.com>
I'd rather not to see this kind of incremental micro-tweaks. The
next person who runs on an even slower box or with more excessive
parallelism compared to his machine size may complain and send a
patch to raise this to 20.
Who are we trying to help, and if you raised this to "forever", whom
would such a change be hurting? If there is something wrong with
the p4 installation, it may never come up, but an interactive user
will eventually end up seeing "waiting for p4d to start" and nothing
else in such a case, and will know to kill it with ^C. An automated
test spawned from a cron job would definitely be hurt with a timeout
of "forever", but to them, 10 seconds or 10 minutes would not make
much of practical differences (as long as you do not run such a cron
job too often).
My preference would probably be a very long default that can be
shortened (or lengthened) with an environment variable, so that a
frequent auto-builder that runs the tests every five minutes can
tune it down to 30 seconds, or something like that.
> t/lib-git-p4.sh | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh
> index 121e380..0080eae 100644
> --- a/t/lib-git-p4.sh
> +++ b/t/lib-git-p4.sh
> @@ -37,7 +37,7 @@ start_p4d() {
> p4d -q -r "$db" -p $P4DPORT &
> echo $! >"$pidfile"
> ) &&
> - for i in 1 2 3 4 5 ; do
> + for i in 1 2 3 4 5 6 7 8 9 10 ; do
> p4 info >/dev/null 2>&1 && break || true &&
> echo waiting for p4d to start &&
> sleep 1
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 2/9] git p4 test: use real_path to resolve p4 client symlinks
2012-06-26 1:18 [PATCH 0/9] git p4 test fixes Pete Wyckoff
2012-06-26 1:18 ` [PATCH 1/9] git p4 test: wait longer for p4d to start Pete Wyckoff
@ 2012-06-26 1:18 ` Pete Wyckoff
2012-06-26 1:18 ` [PATCH 3/9] git p4 test: simplify quoting involving TRASH_DIRECTORY Pete Wyckoff
` (6 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Pete Wyckoff @ 2012-06-26 1:18 UTC (permalink / raw)
To: git
The p4 program is finicky about making sure the recorded client Root
matches the current working directory. The way it discovers the latter
seems to be to inspect shell variable $PWD. This could involve symlinks,
that while leading to the same place as the client Root, look different,
and cause p4 to fail.
Resolve all client paths using "test-path-utils real_path $path". This
removes ".." and resolves all symlinks.
Discovered while running with --root=/dev/shm, which is a link to
/run/shm.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/lib-git-p4.sh | 2 +-
t/t9806-git-p4-options.sh | 2 +-
t/t9810-git-p4-rcs.sh | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh
index 0080eae..2693105 100644
--- a/t/lib-git-p4.sh
+++ b/t/lib-git-p4.sh
@@ -27,7 +27,7 @@ export P4CLIENT=client
export P4EDITOR=:
db="$TRASH_DIRECTORY/db"
-cli="$TRASH_DIRECTORY/cli"
+cli=$(test-path-utils real_path "$TRASH_DIRECTORY/cli")
git="$TRASH_DIRECTORY/git"
pidfile="$TRASH_DIRECTORY/p4d.pid"
diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh
index 2892367..83738fa 100755
--- a/t/t9806-git-p4-options.sh
+++ b/t/t9806-git-p4-options.sh
@@ -128,7 +128,7 @@ test_expect_success 'clone --use-client-spec' '
exec >/dev/null &&
test_must_fail git p4 clone --dest="$git" --use-client-spec
) &&
- cli2="$TRASH_DIRECTORY/cli2" &&
+ cli2=$(test-path-utils real_path "$TRASH_DIRECTORY/cli2") &&
mkdir -p "$cli2" &&
test_when_finished "rmdir \"$cli2\"" &&
(
diff --git a/t/t9810-git-p4-rcs.sh b/t/t9810-git-p4-rcs.sh
index d8d9ca4..c7313b0 100755
--- a/t/t9810-git-p4-rcs.sh
+++ b/t/t9810-git-p4-rcs.sh
@@ -244,7 +244,7 @@ test_expect_success 'cope with rcs keyword expansion damage' '
cd "$git" &&
git config git-p4.skipSubmitEdit true &&
git config git-p4.attemptRCSCleanup true &&
- (cd ../cli && p4_append_to_file kwfile1.c) &&
+ (cd "$cli" && p4_append_to_file kwfile1.c) &&
old_lines=$(wc -l <kwfile1.c) &&
perl -n -i -e "print unless m/Revision:/" kwfile1.c &&
new_lines=$(wc -l <kwfile1.c) &&
--
1.7.11.rc2.72.gebb7ee5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 3/9] git p4 test: simplify quoting involving TRASH_DIRECTORY
2012-06-26 1:18 [PATCH 0/9] git p4 test fixes Pete Wyckoff
2012-06-26 1:18 ` [PATCH 1/9] git p4 test: wait longer for p4d to start Pete Wyckoff
2012-06-26 1:18 ` [PATCH 2/9] git p4 test: use real_path to resolve p4 client symlinks Pete Wyckoff
@ 2012-06-26 1:18 ` Pete Wyckoff
2012-06-26 6:24 ` Johannes Sixt
2012-06-26 1:18 ` [PATCH 4/9] git p4 test: never create default test repo Pete Wyckoff
` (5 subsequent siblings)
8 siblings, 1 reply; 14+ messages in thread
From: Pete Wyckoff @ 2012-06-26 1:18 UTC (permalink / raw)
To: git
For temporary files that are created in the top-level TRASH_DIRECTORY,
trust that the tests do not chdir except in subshells, and avoid some
quoting.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/t9800-git-p4-basic.sh | 11 +++++------
t/t9805-git-p4-skip-submit-edit.sh | 9 ++++-----
t/t9806-git-p4-options.sh | 14 ++++++--------
t/t9808-git-p4-chdir.sh | 4 ++--
4 files changed, 17 insertions(+), 21 deletions(-)
diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh
index 0f410c4..7401c21 100755
--- a/t/t9800-git-p4-basic.sh
+++ b/t/t9800-git-p4-basic.sh
@@ -126,15 +126,14 @@ test_expect_success 'clone two dirs, @all, conflicting files' '
'
test_expect_success 'exit when p4 fails to produce marshaled output' '
- badp4dir="$TRASH_DIRECTORY/badp4dir" &&
- mkdir "$badp4dir" &&
- test_when_finished "rm \"$badp4dir/p4\" && rmdir \"$badp4dir\"" &&
- cat >"$badp4dir"/p4 <<-EOF &&
+ mkdir badp4dir &&
+ test_when_finished "rm badp4dir/p4 && rmdir badp4dir" &&
+ cat >badp4dir/p4 <<-EOF &&
#!$SHELL_PATH
exit 1
EOF
- chmod 755 "$badp4dir"/p4 &&
- PATH="$badp4dir:$PATH" git p4 clone --dest="$git" //depot >errs 2>&1 ; retval=$? &&
+ chmod 755 badp4dir/p4 &&
+ PATH="$TRASH_DIRECTORY/badp4dir:$PATH" git p4 clone --dest="$git" //depot >errs 2>&1 ; retval=$? &&
test $retval -eq 1 &&
test_must_fail grep -q Traceback errs
'
diff --git a/t/t9805-git-p4-skip-submit-edit.sh b/t/t9805-git-p4-skip-submit-edit.sh
index 353dcfb..fb3c8ec 100755
--- a/t/t9805-git-p4-skip-submit-edit.sh
+++ b/t/t9805-git-p4-skip-submit-edit.sh
@@ -78,20 +78,19 @@ test_expect_success 'skipSubmitEditCheck' '
test_expect_success 'no config, edited' '
git p4 clone --dest="$git" //depot &&
test_when_finished cleanup_git &&
- ed="$TRASH_DIRECTORY/ed.sh" &&
- test_when_finished "rm \"$ed\"" &&
- cat >"$ed" <<-EOF &&
+ test_when_finished "rm ed.sh" &&
+ cat >ed.sh <<-EOF &&
#!$SHELL_PATH
sleep 1
touch "\$1"
exit 0
EOF
- chmod 755 "$ed" &&
+ chmod 755 ed.sh &&
(
cd "$git" &&
echo line >>file1 &&
git commit -a -m "change 5" &&
- P4EDITOR="" EDITOR="\"$ed\"" git p4 submit &&
+ P4EDITOR="" EDITOR="\"$TRASH_DIRECTORY/ed.sh\"" git p4 submit &&
p4 changes //depot/... >wc &&
test_line_count = 5 wc
)
diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh
index 83738fa..a37c6cb 100755
--- a/t/t9806-git-p4-options.sh
+++ b/t/t9806-git-p4-options.sh
@@ -39,10 +39,9 @@ test_expect_success 'clone --branch' '
'
test_expect_success 'clone --changesfile' '
- cf="$TRASH_DIRECTORY/cf" &&
- test_when_finished "rm \"$cf\"" &&
- printf "1\n3\n" >"$cf" &&
- git p4 clone --changesfile="$cf" --dest="$git" //depot &&
+ test_when_finished "rm cf" &&
+ printf "1\n3\n" >cf &&
+ git p4 clone --changesfile="$TRASH_DIRECTORY/cf" --dest="$git" //depot &&
test_when_finished cleanup_git &&
(
cd "$git" &&
@@ -55,10 +54,9 @@ test_expect_success 'clone --changesfile' '
'
test_expect_success 'clone --changesfile, @all' '
- cf="$TRASH_DIRECTORY/cf" &&
- test_when_finished "rm \"$cf\"" &&
- printf "1\n3\n" >"$cf" &&
- test_must_fail git p4 clone --changesfile="$cf" --dest="$git" //depot@all
+ test_when_finished "rm cf" &&
+ printf "1\n3\n" >cf &&
+ test_must_fail git p4 clone --changesfile="$TRASH_DIRECTORY/cf" --dest="$git" //depot@all
'
# imports both master and p4/master in refs/heads
diff --git a/t/t9808-git-p4-chdir.sh b/t/t9808-git-p4-chdir.sh
index 2f8014a..dc92e60 100755
--- a/t/t9808-git-p4-chdir.sh
+++ b/t/t9808-git-p4-chdir.sh
@@ -21,7 +21,7 @@ test_expect_success 'init depot' '
# environment variable is set
test_expect_success 'P4CONFIG and absolute dir clone' '
printf "P4PORT=$P4PORT\nP4CLIENT=$P4CLIENT\n" >p4config &&
- test_when_finished "rm \"$TRASH_DIRECTORY/p4config\"" &&
+ test_when_finished "rm p4config" &&
test_when_finished cleanup_git &&
(
P4CONFIG=p4config && export P4CONFIG &&
@@ -33,7 +33,7 @@ test_expect_success 'P4CONFIG and absolute dir clone' '
# same thing, but with relative directory name, note missing $ on --dest
test_expect_success 'P4CONFIG and relative dir clone' '
printf "P4PORT=$P4PORT\nP4CLIENT=$P4CLIENT\n" >p4config &&
- test_when_finished "rm \"$TRASH_DIRECTORY/p4config\"" &&
+ test_when_finished "rm p4config" &&
test_when_finished cleanup_git &&
(
P4CONFIG=p4config && export P4CONFIG &&
--
1.7.11.rc2.72.gebb7ee5
^ permalink raw reply related [flat|nested] 14+ messages in thread* Re: [PATCH 3/9] git p4 test: simplify quoting involving TRASH_DIRECTORY
2012-06-26 1:18 ` [PATCH 3/9] git p4 test: simplify quoting involving TRASH_DIRECTORY Pete Wyckoff
@ 2012-06-26 6:24 ` Johannes Sixt
2012-06-26 16:26 ` Junio C Hamano
0 siblings, 1 reply; 14+ messages in thread
From: Johannes Sixt @ 2012-06-26 6:24 UTC (permalink / raw)
To: Pete Wyckoff; +Cc: git
Am 6/26/2012 3:18, schrieb Pete Wyckoff:
> test_expect_success 'exit when p4 fails to produce marshaled output' '
> - badp4dir="$TRASH_DIRECTORY/badp4dir" &&
> - mkdir "$badp4dir" &&
> - test_when_finished "rm \"$badp4dir/p4\" && rmdir \"$badp4dir\"" &&
> - cat >"$badp4dir"/p4 <<-EOF &&
> + mkdir badp4dir &&
> + test_when_finished "rm badp4dir/p4 && rmdir badp4dir" &&
> + cat >badp4dir/p4 <<-EOF &&
> #!$SHELL_PATH
> exit 1
> EOF
> - chmod 755 "$badp4dir"/p4 &&
> - PATH="$badp4dir:$PATH" git p4 clone --dest="$git" //depot >errs 2>&1 ; retval=$? &&
> + chmod 755 badp4dir/p4 &&
> + PATH="$TRASH_DIRECTORY/badp4dir:$PATH" git p4 clone --dest="$git" //depot >errs 2>&1 ; retval=$? &&
> test $retval -eq 1 &&
The long line here is severly broken, because the semicolon breaks the &&
chain; retval would be assigned to even if one of the earlier commands
fails, and that you don't want to treat as success. The least that is
needed is to put the line in braces. But I suggest to rewrite the two
lines above as
(
PATH="$TRASH_DIRECTORY/badp4dir:$PATH" &&
export PATH &&
test_expect_code 1 git p4 clone --dest="$git" //depot >errs 2>&1
) &&
> test_must_fail grep -q Traceback errs
We don't expect that grep fails due to segfault or something. Write this
line as
! grep Traceback errs
Also drop the -q; if the test detects a failure, you do want to see the
grep output in a verbose test run.
-- Hannes
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 3/9] git p4 test: simplify quoting involving TRASH_DIRECTORY
2012-06-26 6:24 ` Johannes Sixt
@ 2012-06-26 16:26 ` Junio C Hamano
2012-06-26 17:10 ` Pete Wyckoff
0 siblings, 1 reply; 14+ messages in thread
From: Junio C Hamano @ 2012-06-26 16:26 UTC (permalink / raw)
To: Johannes Sixt; +Cc: Pete Wyckoff, git
Johannes Sixt <j.sixt@viscovery.net> writes:
> Am 6/26/2012 3:18, schrieb Pete Wyckoff:
>> test_expect_success 'exit when p4 fails to produce marshaled output' '
>> - badp4dir="$TRASH_DIRECTORY/badp4dir" &&
>> - mkdir "$badp4dir" &&
>> - test_when_finished "rm \"$badp4dir/p4\" && rmdir \"$badp4dir\"" &&
>> - cat >"$badp4dir"/p4 <<-EOF &&
>> + mkdir badp4dir &&
>> + test_when_finished "rm badp4dir/p4 && rmdir badp4dir" &&
>> + cat >badp4dir/p4 <<-EOF &&
>> #!$SHELL_PATH
>> exit 1
>> EOF
>> - chmod 755 "$badp4dir"/p4 &&
>> - PATH="$badp4dir:$PATH" git p4 clone --dest="$git" //depot >errs 2>&1 ; retval=$? &&
>> + chmod 755 badp4dir/p4 &&
>> + PATH="$TRASH_DIRECTORY/badp4dir:$PATH" git p4 clone --dest="$git" //depot >errs 2>&1 ; retval=$? &&
>> test $retval -eq 1 &&
>
> The long line here is severly broken, because the semicolon breaks the &&
> chain; retval would be assigned to even if one of the earlier commands
> fails, and that you don't want to treat as success. The least that is
> needed is to put the line in braces. But I suggest to rewrite the two
> lines above as
>
> (
> PATH="$TRASH_DIRECTORY/badp4dir:$PATH" &&
> export PATH &&
> test_expect_code 1 git p4 clone --dest="$git" //depot >errs 2>&1
> ) &&
>
>> test_must_fail grep -q Traceback errs
>
> We don't expect that grep fails due to segfault or something. Write this
> line as
>
> ! grep Traceback errs
>
> Also drop the -q; if the test detects a failure, you do want to see the
> grep output in a verbose test run.
All true. Thanks for carefully reading.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH 3/9] git p4 test: simplify quoting involving TRASH_DIRECTORY
2012-06-26 16:26 ` Junio C Hamano
@ 2012-06-26 17:10 ` Pete Wyckoff
0 siblings, 0 replies; 14+ messages in thread
From: Pete Wyckoff @ 2012-06-26 17:10 UTC (permalink / raw)
To: Junio C Hamano; +Cc: Johannes Sixt, git
gitster@pobox.com wrote on Tue, 26 Jun 2012 09:26 -0700:
> Johannes Sixt <j.sixt@viscovery.net> writes:
>
> > Am 6/26/2012 3:18, schrieb Pete Wyckoff:
> >> test_expect_success 'exit when p4 fails to produce marshaled output' '
> >> - badp4dir="$TRASH_DIRECTORY/badp4dir" &&
> >> - mkdir "$badp4dir" &&
> >> - test_when_finished "rm \"$badp4dir/p4\" && rmdir \"$badp4dir\"" &&
> >> - cat >"$badp4dir"/p4 <<-EOF &&
> >> + mkdir badp4dir &&
> >> + test_when_finished "rm badp4dir/p4 && rmdir badp4dir" &&
> >> + cat >badp4dir/p4 <<-EOF &&
> >> #!$SHELL_PATH
> >> exit 1
> >> EOF
> >> - chmod 755 "$badp4dir"/p4 &&
> >> - PATH="$badp4dir:$PATH" git p4 clone --dest="$git" //depot >errs 2>&1 ; retval=$? &&
> >> + chmod 755 badp4dir/p4 &&
> >> + PATH="$TRASH_DIRECTORY/badp4dir:$PATH" git p4 clone --dest="$git" //depot >errs 2>&1 ; retval=$? &&
> >> test $retval -eq 1 &&
> >
> > The long line here is severly broken, because the semicolon breaks the &&
> > chain; retval would be assigned to even if one of the earlier commands
> > fails, and that you don't want to treat as success. The least that is
> > needed is to put the line in braces. But I suggest to rewrite the two
> > lines above as
> >
> > (
> > PATH="$TRASH_DIRECTORY/badp4dir:$PATH" &&
> > export PATH &&
> > test_expect_code 1 git p4 clone --dest="$git" //depot >errs 2>&1
> > ) &&
> >
> >> test_must_fail grep -q Traceback errs
> >
> > We don't expect that grep fails due to segfault or something. Write this
> > line as
> >
> > ! grep Traceback errs
> >
> > Also drop the -q; if the test detects a failure, you do want to see the
> > grep output in a verbose test run.
>
> All true. Thanks for carefully reading.
Yes, both your reviews are quite appreciated. I've got patches
ready for these and will plan to send out an updated series
tonight.
-- Pete
^ permalink raw reply [flat|nested] 14+ messages in thread
* [PATCH 4/9] git p4 test: never create default test repo
2012-06-26 1:18 [PATCH 0/9] git p4 test fixes Pete Wyckoff
` (2 preceding siblings ...)
2012-06-26 1:18 ` [PATCH 3/9] git p4 test: simplify quoting involving TRASH_DIRECTORY Pete Wyckoff
@ 2012-06-26 1:18 ` Pete Wyckoff
2012-06-26 1:18 ` [PATCH 5/9] git p4 test: rename some "git-p4 command" strings Pete Wyckoff
` (4 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Pete Wyckoff @ 2012-06-26 1:18 UTC (permalink / raw)
To: git
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/lib-git-p4.sh | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh
index 2693105..06d4d3a 100644
--- a/t/lib-git-p4.sh
+++ b/t/lib-git-p4.sh
@@ -2,6 +2,10 @@
# Library code for git p4 tests
#
+# p4 tests never use the top-level repo; always build/clone into
+# a subdirectory called "$git"
+TEST_NO_CREATE_REPO=NoThanks
+
. ./test-lib.sh
if ! test_have_prereq PYTHON; then
--
1.7.11.rc2.72.gebb7ee5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 5/9] git p4 test: rename some "git-p4 command" strings
2012-06-26 1:18 [PATCH 0/9] git p4 test fixes Pete Wyckoff
` (3 preceding siblings ...)
2012-06-26 1:18 ` [PATCH 4/9] git p4 test: never create default test repo Pete Wyckoff
@ 2012-06-26 1:18 ` Pete Wyckoff
2012-06-26 1:18 ` [PATCH 6/9] git p4 test: check for error message in failed test Pete Wyckoff
` (3 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Pete Wyckoff @ 2012-06-26 1:18 UTC (permalink / raw)
To: git
Use the actual command name; git-p4 is gone.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/t9810-git-p4-rcs.sh | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/t/t9810-git-p4-rcs.sh b/t/t9810-git-p4-rcs.sh
index c7313b0..d8bb3d0 100755
--- a/t/t9810-git-p4-rcs.sh
+++ b/t/t9810-git-p4-rcs.sh
@@ -1,6 +1,6 @@
#!/bin/sh
-test_description='git-p4 rcs keywords'
+test_description='git p4 rcs keywords'
. ./lib-git-p4.sh
@@ -147,7 +147,7 @@ test_expect_success 'scrub ko files differently' '
)
'
-# hack; git-p4 submit should do it on its own
+# hack; git p4 submit should do it on its own
test_expect_success 'cleanup after failure' '
(
cd "$cli" &&
@@ -193,7 +193,7 @@ test_expect_success 'do not scrub plain text' '
)
'
-# hack; git-p4 submit should do it on its own
+# hack; git p4 submit should do it on its own
test_expect_success 'cleanup after failure 2' '
(
cd "$cli" &&
--
1.7.11.rc2.72.gebb7ee5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 6/9] git p4 test: check for error message in failed test
2012-06-26 1:18 [PATCH 0/9] git p4 test fixes Pete Wyckoff
` (4 preceding siblings ...)
2012-06-26 1:18 ` [PATCH 5/9] git p4 test: rename some "git-p4 command" strings Pete Wyckoff
@ 2012-06-26 1:18 ` Pete Wyckoff
2012-06-26 1:18 ` [PATCH 7/9] git p4 test: copy source indeterminate Pete Wyckoff
` (2 subsequent siblings)
8 siblings, 0 replies; 14+ messages in thread
From: Pete Wyckoff @ 2012-06-26 1:18 UTC (permalink / raw)
To: git
Make sure the test fails for the expected reason.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/t9800-git-p4-basic.sh | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh
index 7401c21..84676a1 100755
--- a/t/t9800-git-p4-basic.sh
+++ b/t/t9800-git-p4-basic.sh
@@ -45,7 +45,8 @@ test_expect_success 'git p4 sync uninitialized repo' '
test_when_finished cleanup_git &&
(
cd "$git" &&
- test_must_fail git p4 sync
+ test_must_fail git p4 sync 2>errs &&
+ test_i18ngrep "Perhaps you never did" errs
)
'
--
1.7.11.rc2.72.gebb7ee5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 7/9] git p4 test: copy source indeterminate
2012-06-26 1:18 [PATCH 0/9] git p4 test fixes Pete Wyckoff
` (5 preceding siblings ...)
2012-06-26 1:18 ` [PATCH 6/9] git p4 test: check for error message in failed test Pete Wyckoff
@ 2012-06-26 1:18 ` Pete Wyckoff
2012-06-26 1:18 ` [PATCH 8/9] git p4 test: cleanup_git should make a new $git Pete Wyckoff
2012-06-26 1:18 ` [PATCH 9/9] git p4 test: split up big t9800 test Pete Wyckoff
8 siblings, 0 replies; 14+ messages in thread
From: Pete Wyckoff @ 2012-06-26 1:18 UTC (permalink / raw)
To: git
Msysgit testing showed that the source file found by copy
detection is indeterminate when there are multiple sources
to choose from. This appears to be valid. Adjust the test
so that it passes if it finds any of the potential copy sources.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/t9800-git-p4-basic.sh | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh
index 84676a1..60c1f57 100755
--- a/t/t9800-git-p4-basic.sh
+++ b/t/t9800-git-p4-basic.sh
@@ -547,7 +547,7 @@ test_expect_success 'detect copies' '
level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") &&
test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 &&
src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) &&
- test "$src" = file10 &&
+ test "$src" = file10 -o "$src" = file11 &&
git config git-p4.detectCopies $(($level + 2)) &&
git p4 submit &&
p4 filelog //depot/file12 &&
@@ -561,7 +561,7 @@ test_expect_success 'detect copies' '
level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") &&
test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 &&
src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) &&
- test "$src" = file10 &&
+ test "$src" = file10 -o "$src" = file11 -o "$src" = file12 &&
git config git-p4.detectCopies $(($level - 2)) &&
git p4 submit &&
p4 filelog //depot/file13 &&
--
1.7.11.rc2.72.gebb7ee5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 8/9] git p4 test: cleanup_git should make a new $git
2012-06-26 1:18 [PATCH 0/9] git p4 test fixes Pete Wyckoff
` (6 preceding siblings ...)
2012-06-26 1:18 ` [PATCH 7/9] git p4 test: copy source indeterminate Pete Wyckoff
@ 2012-06-26 1:18 ` Pete Wyckoff
2012-06-26 1:18 ` [PATCH 9/9] git p4 test: split up big t9800 test Pete Wyckoff
8 siblings, 0 replies; 14+ messages in thread
From: Pete Wyckoff @ 2012-06-26 1:18 UTC (permalink / raw)
To: git
For convenience, leave one in place at the end of each
test so that it is not necessary to build a new one. This
makes it consistent with $cli.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/lib-git-p4.sh | 3 ++-
t/t9800-git-p4-basic.sh | 1 +
t/t9806-git-p4-options.sh | 1 -
3 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/t/lib-git-p4.sh b/t/lib-git-p4.sh
index 06d4d3a..15d2634 100644
--- a/t/lib-git-p4.sh
+++ b/t/lib-git-p4.sh
@@ -73,5 +73,6 @@ kill_p4d() {
}
cleanup_git() {
- rm -rf "$git"
+ rm -rf "$git" &&
+ mkdir "$git"
}
diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh
index 60c1f57..234f727 100755
--- a/t/t9800-git-p4-basic.sh
+++ b/t/t9800-git-p4-basic.sh
@@ -270,6 +270,7 @@ test_expect_success 'wildcard files submit back to p4, delete' '
'
test_expect_success 'clone bare' '
+ rm -rf "$git" &&
git p4 clone --dest="$git" --bare //depot &&
test_when_finished cleanup_git &&
(
diff --git a/t/t9806-git-p4-options.sh b/t/t9806-git-p4-options.sh
index a37c6cb..fa40cc8 100755
--- a/t/t9806-git-p4-options.sh
+++ b/t/t9806-git-p4-options.sh
@@ -149,7 +149,6 @@ test_expect_success 'clone --use-client-spec' '
cleanup_git &&
# same thing again, this time with variable instead of option
- mkdir "$git" &&
(
cd "$git" &&
git init &&
--
1.7.11.rc2.72.gebb7ee5
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH 9/9] git p4 test: split up big t9800 test
2012-06-26 1:18 [PATCH 0/9] git p4 test fixes Pete Wyckoff
` (7 preceding siblings ...)
2012-06-26 1:18 ` [PATCH 8/9] git p4 test: cleanup_git should make a new $git Pete Wyckoff
@ 2012-06-26 1:18 ` Pete Wyckoff
8 siblings, 0 replies; 14+ messages in thread
From: Pete Wyckoff @ 2012-06-26 1:18 UTC (permalink / raw)
To: git
The original t9800 test code has a mix of assorted topics, some
of which are big enough to deserve their own homes.
Interdependencies between the topics make it confusing when
trying to study one in isolation. And it takes so long to run
that debugging an individual test is difficult.
Split out three big chunks of tests into their own files:
t9812-git-p4-wildcards.sh gets the 8 p4 wildcard tests
t9813-git-p4-preserve-users.sh gets the 4 --preserve-user tests
t9814-git-p4-rename.sh gets the 2 copy and rename tests
Test 9800 execution time drops from 29 sec to 9 sec. The
sequential time to run all tests is a slower due to the three
extra p4d startup/shutdown sequences, but the overall parallel
execution time is about the same, at 52 sec.
Signed-off-by: Pete Wyckoff <pw@padd.com>
---
t/t9800-git-p4-basic.sh | 397 ---------------------------------------
t/t9812-git-p4-wildcards.sh | 147 +++++++++++++++
t/t9813-git-p4-preserve-users.sh | 153 +++++++++++++++
t/t9814-git-p4-rename.sh | 206 ++++++++++++++++++++
4 files changed, 506 insertions(+), 397 deletions(-)
create mode 100755 t/t9812-git-p4-wildcards.sh
create mode 100755 t/t9813-git-p4-preserve-users.sh
create mode 100755 t/t9814-git-p4-rename.sh
diff --git a/t/t9800-git-p4-basic.sh b/t/t9800-git-p4-basic.sh
index 234f727..befd823 100755
--- a/t/t9800-git-p4-basic.sh
+++ b/t/t9800-git-p4-basic.sh
@@ -139,136 +139,6 @@ test_expect_success 'exit when p4 fails to produce marshaled output' '
test_must_fail grep -q Traceback errs
'
-test_expect_success 'add p4 files with wildcards in the names' '
- (
- cd "$cli" &&
- echo file-wild-hash >file-wild#hash &&
- echo file-wild-star >file-wild\*star &&
- echo file-wild-at >file-wild@at &&
- echo file-wild-percent >file-wild%percent &&
- p4 add -f file-wild* &&
- p4 submit -d "file wildcards"
- )
-'
-
-test_expect_success 'wildcard files git p4 clone' '
- git p4 clone --dest="$git" //depot &&
- test_when_finished cleanup_git &&
- (
- cd "$git" &&
- test -f file-wild#hash &&
- test -f file-wild\*star &&
- test -f file-wild@at &&
- test -f file-wild%percent
- )
-'
-
-test_expect_success 'wildcard files submit back to p4, add' '
- test_when_finished cleanup_git &&
- git p4 clone --dest="$git" //depot &&
- (
- cd "$git" &&
- echo git-wild-hash >git-wild#hash &&
- echo git-wild-star >git-wild\*star &&
- echo git-wild-at >git-wild@at &&
- echo git-wild-percent >git-wild%percent &&
- git add git-wild* &&
- git commit -m "add some wildcard filenames" &&
- git config git-p4.skipSubmitEdit true &&
- git p4 submit
- ) &&
- (
- cd "$cli" &&
- test_path_is_file git-wild#hash &&
- test_path_is_file git-wild\*star &&
- test_path_is_file git-wild@at &&
- test_path_is_file git-wild%percent
- )
-'
-
-test_expect_success 'wildcard files submit back to p4, modify' '
- test_when_finished cleanup_git &&
- git p4 clone --dest="$git" //depot &&
- (
- cd "$git" &&
- echo new-line >>git-wild#hash &&
- echo new-line >>git-wild\*star &&
- echo new-line >>git-wild@at &&
- echo new-line >>git-wild%percent &&
- git add git-wild* &&
- git commit -m "modify the wildcard files" &&
- git config git-p4.skipSubmitEdit true &&
- git p4 submit
- ) &&
- (
- cd "$cli" &&
- test_line_count = 2 git-wild#hash &&
- test_line_count = 2 git-wild\*star &&
- test_line_count = 2 git-wild@at &&
- test_line_count = 2 git-wild%percent
- )
-'
-
-test_expect_success 'wildcard files submit back to p4, copy' '
- test_when_finished cleanup_git &&
- git p4 clone --dest="$git" //depot &&
- (
- cd "$git" &&
- cp file2 git-wild-cp#hash &&
- git add git-wild-cp#hash &&
- cp git-wild\*star file-wild-3 &&
- git add file-wild-3 &&
- git commit -m "wildcard copies" &&
- git config git-p4.detectCopies true &&
- git config git-p4.detectCopiesHarder true &&
- git config git-p4.skipSubmitEdit true &&
- git p4 submit
- ) &&
- (
- cd "$cli" &&
- test_path_is_file git-wild-cp#hash &&
- test_path_is_file file-wild-3
- )
-'
-
-test_expect_success 'wildcard files submit back to p4, rename' '
- test_when_finished cleanup_git &&
- git p4 clone --dest="$git" //depot &&
- (
- cd "$git" &&
- git mv git-wild@at file-wild-4 &&
- git mv file-wild-3 git-wild-cp%percent &&
- git commit -m "wildcard renames" &&
- git config git-p4.detectRenames true &&
- git config git-p4.skipSubmitEdit true &&
- git p4 submit
- ) &&
- (
- cd "$cli" &&
- test_path_is_missing git-wild@at &&
- test_path_is_file git-wild-cp%percent
- )
-'
-
-test_expect_success 'wildcard files submit back to p4, delete' '
- test_when_finished cleanup_git &&
- git p4 clone --dest="$git" //depot &&
- (
- cd "$git" &&
- git rm git-wild* &&
- git commit -m "delete the wildcard files" &&
- git config git-p4.skipSubmitEdit true &&
- git p4 submit
- ) &&
- (
- cd "$cli" &&
- test_path_is_missing git-wild#hash &&
- test_path_is_missing git-wild\*star &&
- test_path_is_missing git-wild@at &&
- test_path_is_missing git-wild%percent
- )
-'
-
test_expect_success 'clone bare' '
rm -rf "$git" &&
git p4 clone --dest="$git" --bare //depot &&
@@ -281,133 +151,6 @@ test_expect_success 'clone bare' '
)
'
-p4_add_user() {
- name=$1 fullname=$2 &&
- p4 user -f -i <<-EOF &&
- User: $name
- Email: $name@localhost
- FullName: $fullname
- EOF
- p4 passwd -P secret $name
-}
-
-p4_grant_admin() {
- name=$1 &&
- {
- p4 protect -o &&
- echo " admin user $name * //depot/..."
- } | p4 protect -i
-}
-
-p4_check_commit_author() {
- file=$1 user=$2 &&
- p4 changes -m 1 //depot/$file | grep -q $user
-}
-
-make_change_by_user() {
- file=$1 name=$2 email=$3 &&
- echo "username: a change by $name" >>"$file" &&
- git add "$file" &&
- git commit --author "$name <$email>" -m "a change by $name"
-}
-
-# Test username support, submitting as user 'alice'
-test_expect_success 'preserve users' '
- p4_add_user alice Alice &&
- p4_add_user bob Bob &&
- p4_grant_admin alice &&
- git p4 clone --dest="$git" //depot &&
- test_when_finished cleanup_git &&
- (
- cd "$git" &&
- echo "username: a change by alice" >>file1 &&
- echo "username: a change by bob" >>file2 &&
- git commit --author "Alice <alice@localhost>" -m "a change by alice" file1 &&
- git commit --author "Bob <bob@localhost>" -m "a change by bob" file2 &&
- git config git-p4.skipSubmitEditCheck true &&
- P4EDITOR=touch P4USER=alice P4PASSWD=secret git p4 commit --preserve-user &&
- p4_check_commit_author file1 alice &&
- p4_check_commit_author file2 bob
- )
-'
-
-# Test username support, submitting as bob, who lacks admin rights. Should
-# not submit change to p4 (git diff should show deltas).
-test_expect_success 'refuse to preserve users without perms' '
- git p4 clone --dest="$git" //depot &&
- test_when_finished cleanup_git &&
- (
- cd "$git" &&
- git config git-p4.skipSubmitEditCheck true &&
- echo "username-noperms: a change by alice" >>file1 &&
- git commit --author "Alice <alice@localhost>" -m "perms: a change by alice" file1 &&
- P4EDITOR=touch P4USER=bob P4PASSWD=secret &&
- export P4EDITOR P4USER P4PASSWD &&
- test_must_fail git p4 commit --preserve-user &&
- ! git diff --exit-code HEAD..p4/master
- )
-'
-
-# What happens with unknown author? Without allowMissingP4Users it should fail.
-test_expect_success 'preserve user where author is unknown to p4' '
- git p4 clone --dest="$git" //depot &&
- test_when_finished cleanup_git &&
- (
- cd "$git" &&
- git config git-p4.skipSubmitEditCheck true &&
- echo "username-bob: a change by bob" >>file1 &&
- git commit --author "Bob <bob@localhost>" -m "preserve: a change by bob" file1 &&
- echo "username-unknown: a change by charlie" >>file1 &&
- git commit --author "Charlie <charlie@localhost>" -m "preserve: a change by charlie" file1 &&
- P4EDITOR=touch P4USER=alice P4PASSWD=secret &&
- export P4EDITOR P4USER P4PASSWD &&
- test_must_fail git p4 commit --preserve-user &&
- ! git diff --exit-code HEAD..p4/master &&
-
- echo "$0: repeat with allowMissingP4Users enabled" &&
- git config git-p4.allowMissingP4Users true &&
- git config git-p4.preserveUser true &&
- git p4 commit &&
- git diff --exit-code HEAD..p4/master &&
- p4_check_commit_author file1 alice
- )
-'
-
-# If we're *not* using --preserve-user, git p4 should warn if we're submitting
-# changes that are not all ours.
-# Test: user in p4 and user unknown to p4.
-# Test: warning disabled and user is the same.
-test_expect_success 'not preserving user with mixed authorship' '
- git p4 clone --dest="$git" //depot &&
- test_when_finished cleanup_git &&
- (
- cd "$git" &&
- git config git-p4.skipSubmitEditCheck true &&
- p4_add_user derek Derek &&
-
- make_change_by_user usernamefile3 Derek derek@localhost &&
- P4EDITOR=cat P4USER=alice P4PASSWD=secret &&
- export P4EDITOR P4USER P4PASSWD &&
- git p4 commit |\
- grep "git author derek@localhost does not match" &&
-
- make_change_by_user usernamefile3 Charlie charlie@localhost &&
- git p4 commit |\
- grep "git author charlie@localhost does not match" &&
-
- make_change_by_user usernamefile3 alice alice@localhost &&
- git p4 commit |\
- test_must_fail grep "git author.*does not match" &&
-
- git config git-p4.skipUserNameCheck true &&
- make_change_by_user usernamefile3 Charlie charlie@localhost &&
- git p4 commit |\
- test_must_fail grep "git author.*does not match" &&
-
- p4_check_commit_author usernamefile3 alice
- )
-'
-
marshal_dump() {
what=$1
"$PYTHON_PATH" -c 'import marshal, sys; d = marshal.load(sys.stdin); print d["'$what'"]'
@@ -430,146 +173,6 @@ test_expect_success 'initial import time from top change time' '
)
'
-# Rename a file and confirm that rename is not detected in P4.
-# Rename the new file again with detectRenames option enabled and confirm that
-# this is detected in P4.
-# Rename the new file again adding an extra line, configure a big threshold in
-# detectRenames and confirm that rename is not detected in P4.
-# Repeat, this time with a smaller threshold and confirm that the rename is
-# detected in P4.
-test_expect_success 'detect renames' '
- git p4 clone --dest="$git" //depot@all &&
- test_when_finished cleanup_git &&
- (
- cd "$git" &&
- git config git-p4.skipSubmitEdit true &&
-
- git mv file1 file4 &&
- git commit -a -m "Rename file1 to file4" &&
- git diff-tree -r -M HEAD &&
- git p4 submit &&
- p4 filelog //depot/file4 &&
- p4 filelog //depot/file4 | test_must_fail grep -q "branch from" &&
-
- git mv file4 file5 &&
- git commit -a -m "Rename file4 to file5" &&
- git diff-tree -r -M HEAD &&
- git config git-p4.detectRenames true &&
- git p4 submit &&
- p4 filelog //depot/file5 &&
- p4 filelog //depot/file5 | grep -q "branch from //depot/file4" &&
-
- git mv file5 file6 &&
- echo update >>file6 &&
- git add file6 &&
- git commit -a -m "Rename file5 to file6 with changes" &&
- git diff-tree -r -M HEAD &&
- level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") &&
- test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 &&
- git config git-p4.detectRenames $(($level + 2)) &&
- git p4 submit &&
- p4 filelog //depot/file6 &&
- p4 filelog //depot/file6 | test_must_fail grep -q "branch from" &&
-
- git mv file6 file7 &&
- echo update >>file7 &&
- git add file7 &&
- git commit -a -m "Rename file6 to file7 with changes" &&
- git diff-tree -r -M HEAD &&
- level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") &&
- test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 &&
- git config git-p4.detectRenames $(($level - 2)) &&
- git p4 submit &&
- p4 filelog //depot/file7 &&
- p4 filelog //depot/file7 | grep -q "branch from //depot/file6"
- )
-'
-
-# Copy a file and confirm that copy is not detected in P4.
-# Copy a file with detectCopies option enabled and confirm that copy is not
-# detected in P4.
-# Modify and copy a file with detectCopies option enabled and confirm that copy
-# is detected in P4.
-# Copy a file with detectCopies and detectCopiesHarder options enabled and
-# confirm that copy is detected in P4.
-# Modify and copy a file, configure a bigger threshold in detectCopies and
-# confirm that copy is not detected in P4.
-# Modify and copy a file, configure a smaller threshold in detectCopies and
-# confirm that copy is detected in P4.
-test_expect_success 'detect copies' '
- git p4 clone --dest="$git" //depot@all &&
- test_when_finished cleanup_git &&
- (
- cd "$git" &&
- git config git-p4.skipSubmitEdit true &&
-
- cp file2 file8 &&
- git add file8 &&
- git commit -a -m "Copy file2 to file8" &&
- git diff-tree -r -C HEAD &&
- git p4 submit &&
- p4 filelog //depot/file8 &&
- p4 filelog //depot/file8 | test_must_fail grep -q "branch from" &&
-
- cp file2 file9 &&
- git add file9 &&
- git commit -a -m "Copy file2 to file9" &&
- git diff-tree -r -C HEAD &&
- git config git-p4.detectCopies true &&
- git p4 submit &&
- p4 filelog //depot/file9 &&
- p4 filelog //depot/file9 | test_must_fail grep -q "branch from" &&
-
- echo "file2" >>file2 &&
- cp file2 file10 &&
- git add file2 file10 &&
- git commit -a -m "Modify and copy file2 to file10" &&
- git diff-tree -r -C HEAD &&
- git p4 submit &&
- p4 filelog //depot/file10 &&
- p4 filelog //depot/file10 | grep -q "branch from //depot/file" &&
-
- cp file2 file11 &&
- git add file11 &&
- git commit -a -m "Copy file2 to file11" &&
- git diff-tree -r -C --find-copies-harder HEAD &&
- src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) &&
- test "$src" = file10 &&
- git config git-p4.detectCopiesHarder true &&
- git p4 submit &&
- p4 filelog //depot/file11 &&
- p4 filelog //depot/file11 | grep -q "branch from //depot/file" &&
-
- cp file2 file12 &&
- echo "some text" >>file12 &&
- git add file12 &&
- git commit -a -m "Copy file2 to file12 with changes" &&
- git diff-tree -r -C --find-copies-harder HEAD &&
- level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") &&
- test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 &&
- src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) &&
- test "$src" = file10 -o "$src" = file11 &&
- git config git-p4.detectCopies $(($level + 2)) &&
- git p4 submit &&
- p4 filelog //depot/file12 &&
- p4 filelog //depot/file12 | test_must_fail grep -q "branch from" &&
-
- cp file2 file13 &&
- echo "different text" >>file13 &&
- git add file13 &&
- git commit -a -m "Copy file2 to file13 with changes" &&
- git diff-tree -r -C --find-copies-harder HEAD &&
- level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") &&
- test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 &&
- src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) &&
- test "$src" = file10 -o "$src" = file11 -o "$src" = file12 &&
- git config git-p4.detectCopies $(($level - 2)) &&
- git p4 submit &&
- p4 filelog //depot/file13 &&
- p4 filelog //depot/file13 | grep -q "branch from //depot/file"
- )
-'
-
test_expect_success 'kill p4d' '
kill_p4d
'
diff --git a/t/t9812-git-p4-wildcards.sh b/t/t9812-git-p4-wildcards.sh
new file mode 100755
index 0000000..143d413
--- /dev/null
+++ b/t/t9812-git-p4-wildcards.sh
@@ -0,0 +1,147 @@
+#!/bin/sh
+
+test_description='git p4 wildcards'
+
+. ./lib-git-p4.sh
+
+test_expect_success 'start p4d' '
+ start_p4d
+'
+
+test_expect_success 'add p4 files with wildcards in the names' '
+ (
+ cd "$cli" &&
+ printf "file2\nhas\nsome\nrandom\ntext\n" >file2 &&
+ p4 add file2 &&
+ echo file-wild-hash >file-wild#hash &&
+ echo file-wild-star >file-wild\*star &&
+ echo file-wild-at >file-wild@at &&
+ echo file-wild-percent >file-wild%percent &&
+ p4 add -f file-wild* &&
+ p4 submit -d "file wildcards"
+ )
+'
+
+test_expect_success 'wildcard files git p4 clone' '
+ git p4 clone --dest="$git" //depot &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ test -f file-wild#hash &&
+ test -f file-wild\*star &&
+ test -f file-wild@at &&
+ test -f file-wild%percent
+ )
+'
+
+test_expect_success 'wildcard files submit back to p4, add' '
+ test_when_finished cleanup_git &&
+ git p4 clone --dest="$git" //depot &&
+ (
+ cd "$git" &&
+ echo git-wild-hash >git-wild#hash &&
+ echo git-wild-star >git-wild\*star &&
+ echo git-wild-at >git-wild@at &&
+ echo git-wild-percent >git-wild%percent &&
+ git add git-wild* &&
+ git commit -m "add some wildcard filenames" &&
+ git config git-p4.skipSubmitEdit true &&
+ git p4 submit
+ ) &&
+ (
+ cd "$cli" &&
+ test_path_is_file git-wild#hash &&
+ test_path_is_file git-wild\*star &&
+ test_path_is_file git-wild@at &&
+ test_path_is_file git-wild%percent
+ )
+'
+
+test_expect_success 'wildcard files submit back to p4, modify' '
+ test_when_finished cleanup_git &&
+ git p4 clone --dest="$git" //depot &&
+ (
+ cd "$git" &&
+ echo new-line >>git-wild#hash &&
+ echo new-line >>git-wild\*star &&
+ echo new-line >>git-wild@at &&
+ echo new-line >>git-wild%percent &&
+ git add git-wild* &&
+ git commit -m "modify the wildcard files" &&
+ git config git-p4.skipSubmitEdit true &&
+ git p4 submit
+ ) &&
+ (
+ cd "$cli" &&
+ test_line_count = 2 git-wild#hash &&
+ test_line_count = 2 git-wild\*star &&
+ test_line_count = 2 git-wild@at &&
+ test_line_count = 2 git-wild%percent
+ )
+'
+
+test_expect_success 'wildcard files submit back to p4, copy' '
+ test_when_finished cleanup_git &&
+ git p4 clone --dest="$git" //depot &&
+ (
+ cd "$git" &&
+ cp file2 git-wild-cp#hash &&
+ git add git-wild-cp#hash &&
+ cp git-wild\*star file-wild-3 &&
+ git add file-wild-3 &&
+ git commit -m "wildcard copies" &&
+ git config git-p4.detectCopies true &&
+ git config git-p4.detectCopiesHarder true &&
+ git config git-p4.skipSubmitEdit true &&
+ git p4 submit
+ ) &&
+ (
+ cd "$cli" &&
+ test_path_is_file git-wild-cp#hash &&
+ test_path_is_file file-wild-3
+ )
+'
+
+test_expect_success 'wildcard files submit back to p4, rename' '
+ test_when_finished cleanup_git &&
+ git p4 clone --dest="$git" //depot &&
+ (
+ cd "$git" &&
+ git mv git-wild@at file-wild-4 &&
+ git mv file-wild-3 git-wild-cp%percent &&
+ git commit -m "wildcard renames" &&
+ git config git-p4.detectRenames true &&
+ git config git-p4.skipSubmitEdit true &&
+ git p4 submit
+ ) &&
+ (
+ cd "$cli" &&
+ test_path_is_missing git-wild@at &&
+ test_path_is_file git-wild-cp%percent
+ )
+'
+
+test_expect_success 'wildcard files submit back to p4, delete' '
+ test_when_finished cleanup_git &&
+ git p4 clone --dest="$git" //depot &&
+ (
+ cd "$git" &&
+ git rm git-wild* &&
+ git commit -m "delete the wildcard files" &&
+ git config git-p4.skipSubmitEdit true &&
+ git p4 submit
+ ) &&
+ (
+ cd "$cli" &&
+ test_path_is_missing git-wild#hash &&
+ test_path_is_missing git-wild\*star &&
+ test_path_is_missing git-wild@at &&
+ test_path_is_missing git-wild%percent
+ )
+'
+
+test_expect_success 'kill p4d' '
+ kill_p4d
+'
+
+test_done
diff --git a/t/t9813-git-p4-preserve-users.sh b/t/t9813-git-p4-preserve-users.sh
new file mode 100755
index 0000000..f2e85e5
--- /dev/null
+++ b/t/t9813-git-p4-preserve-users.sh
@@ -0,0 +1,153 @@
+#!/bin/sh
+
+test_description='git p4 preserve users'
+
+. ./lib-git-p4.sh
+
+test_expect_success 'start p4d' '
+ start_p4d
+'
+
+test_expect_success 'create files' '
+ (
+ cd "$cli" &&
+ p4 client -o | sed "/LineEnd/s/:.*/:unix/" | p4 client -i &&
+ echo file1 >file1 &&
+ echo file2 >file2 &&
+ p4 add file1 file2 &&
+ p4 submit -d "add files"
+ )
+'
+
+p4_add_user() {
+ name=$1 fullname=$2 &&
+ p4 user -f -i <<-EOF &&
+ User: $name
+ Email: $name@localhost
+ FullName: $fullname
+ EOF
+ p4 passwd -P secret $name
+}
+
+p4_grant_admin() {
+ name=$1 &&
+ {
+ p4 protect -o &&
+ echo " admin user $name * //depot/..."
+ } | p4 protect -i
+}
+
+p4_check_commit_author() {
+ file=$1 user=$2 &&
+ p4 changes -m 1 //depot/$file | grep -q $user
+}
+
+make_change_by_user() {
+ file=$1 name=$2 email=$3 &&
+ echo "username: a change by $name" >>"$file" &&
+ git add "$file" &&
+ git commit --author "$name <$email>" -m "a change by $name"
+}
+
+# Test username support, submitting as user 'alice'
+test_expect_success 'preserve users' '
+ p4_add_user alice Alice &&
+ p4_add_user bob Bob &&
+ p4_grant_admin alice &&
+ git p4 clone --dest="$git" //depot &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ echo "username: a change by alice" >>file1 &&
+ echo "username: a change by bob" >>file2 &&
+ git commit --author "Alice <alice@localhost>" -m "a change by alice" file1 &&
+ git commit --author "Bob <bob@localhost>" -m "a change by bob" file2 &&
+ git config git-p4.skipSubmitEditCheck true &&
+ P4EDITOR=touch P4USER=alice P4PASSWD=secret git p4 commit --preserve-user &&
+ p4_check_commit_author file1 alice &&
+ p4_check_commit_author file2 bob
+ )
+'
+
+# Test username support, submitting as bob, who lacks admin rights. Should
+# not submit change to p4 (git diff should show deltas).
+test_expect_success 'refuse to preserve users without perms' '
+ git p4 clone --dest="$git" //depot &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git config git-p4.skipSubmitEditCheck true &&
+ echo "username-noperms: a change by alice" >>file1 &&
+ git commit --author "Alice <alice@localhost>" -m "perms: a change by alice" file1 &&
+ P4EDITOR=touch P4USER=bob P4PASSWD=secret &&
+ export P4EDITOR P4USER P4PASSWD &&
+ test_must_fail git p4 commit --preserve-user &&
+ ! git diff --exit-code HEAD..p4/master
+ )
+'
+
+# What happens with unknown author? Without allowMissingP4Users it should fail.
+test_expect_success 'preserve user where author is unknown to p4' '
+ git p4 clone --dest="$git" //depot &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git config git-p4.skipSubmitEditCheck true &&
+ echo "username-bob: a change by bob" >>file1 &&
+ git commit --author "Bob <bob@localhost>" -m "preserve: a change by bob" file1 &&
+ echo "username-unknown: a change by charlie" >>file1 &&
+ git commit --author "Charlie <charlie@localhost>" -m "preserve: a change by charlie" file1 &&
+ P4EDITOR=touch P4USER=alice P4PASSWD=secret &&
+ export P4EDITOR P4USER P4PASSWD &&
+ test_must_fail git p4 commit --preserve-user &&
+ ! git diff --exit-code HEAD..p4/master &&
+
+ echo "$0: repeat with allowMissingP4Users enabled" &&
+ git config git-p4.allowMissingP4Users true &&
+ git config git-p4.preserveUser true &&
+ git p4 commit &&
+ git diff --exit-code HEAD..p4/master &&
+ p4_check_commit_author file1 alice
+ )
+'
+
+# If we're *not* using --preserve-user, git-p4 should warn if we're submitting
+# changes that are not all ours.
+# Test: user in p4 and user unknown to p4.
+# Test: warning disabled and user is the same.
+test_expect_success 'not preserving user with mixed authorship' '
+ git p4 clone --dest="$git" //depot &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git config git-p4.skipSubmitEditCheck true &&
+ p4_add_user derek Derek &&
+
+ make_change_by_user usernamefile3 Derek derek@localhost &&
+ P4EDITOR=cat P4USER=alice P4PASSWD=secret &&
+ export P4EDITOR P4USER P4PASSWD &&
+ git p4 commit |\
+ grep "git author derek@localhost does not match" &&
+
+ make_change_by_user usernamefile3 Charlie charlie@localhost &&
+ git p4 commit |\
+ grep "git author charlie@localhost does not match" &&
+
+ make_change_by_user usernamefile3 alice alice@localhost &&
+ git p4 commit |\
+ test_must_fail grep "git author.*does not match" &&
+
+ git config git-p4.skipUserNameCheck true &&
+ make_change_by_user usernamefile3 Charlie charlie@localhost &&
+ git p4 commit |\
+ test_must_fail grep "git author.*does not match" &&
+
+ p4_check_commit_author usernamefile3 alice
+ )
+'
+
+test_expect_success 'kill p4d' '
+ kill_p4d
+'
+
+test_done
diff --git a/t/t9814-git-p4-rename.sh b/t/t9814-git-p4-rename.sh
new file mode 100755
index 0000000..84fffb3
--- /dev/null
+++ b/t/t9814-git-p4-rename.sh
@@ -0,0 +1,206 @@
+#!/bin/sh
+
+test_description='git p4 rename'
+
+. ./lib-git-p4.sh
+
+test_expect_success 'start p4d' '
+ start_p4d
+'
+
+# We rely on this behavior to detect for p4 move availability.
+test_expect_success 'p4 help unknown returns 1' '
+ (
+ cd "$cli" &&
+ (
+ p4 help client >errs 2>&1
+ echo $? >retval
+ )
+ echo 0 >expected &&
+ test_cmp expected retval &&
+ rm retval &&
+ (
+ p4 help nosuchcommand >errs 2>&1
+ echo $? >retval
+ )
+ echo 1 >expected &&
+ test_cmp expected retval &&
+ rm retval
+ )
+'
+
+test_expect_success 'create files' '
+ (
+ cd "$cli" &&
+ p4 client -o | sed "/LineEnd/s/:.*/:unix/" | p4 client -i &&
+ cat >file1 <<-EOF &&
+ A large block of text
+ in file1 that will generate
+ enough context so that rename
+ and copy detection will find
+ something interesting to do.
+ EOF
+ cat >file2 <<-EOF &&
+ /*
+ * This blob looks a bit
+ * different.
+ */
+ int main(int argc, char **argv)
+ {
+ char text[200];
+
+ strcpy(text, "copy/rename this");
+ printf("text is %s\n", text);
+ return 0;
+ }
+ EOF
+ p4 add file1 file2 &&
+ p4 submit -d "add files"
+ )
+'
+
+# Rename a file and confirm that rename is not detected in P4.
+# Rename the new file again with detectRenames option enabled and confirm that
+# this is detected in P4.
+# Rename the new file again adding an extra line, configure a big threshold in
+# detectRenames and confirm that rename is not detected in P4.
+# Repeat, this time with a smaller threshold and confirm that the rename is
+# detected in P4.
+test_expect_success 'detect renames' '
+ git p4 clone --dest="$git" //depot@all &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git config git-p4.skipSubmitEdit true &&
+
+ git mv file1 file4 &&
+ git commit -a -m "Rename file1 to file4" &&
+ git diff-tree -r -M HEAD &&
+ git p4 submit &&
+ p4 filelog //depot/file4 &&
+ p4 filelog //depot/file4 | test_must_fail grep -q "branch from" &&
+
+ git mv file4 file5 &&
+ git commit -a -m "Rename file4 to file5" &&
+ git diff-tree -r -M HEAD &&
+ git config git-p4.detectRenames true &&
+ git p4 submit &&
+ p4 filelog //depot/file5 &&
+ p4 filelog //depot/file5 | grep -q "branch from //depot/file4" &&
+
+ git mv file5 file6 &&
+ echo update >>file6 &&
+ git add file6 &&
+ git commit -a -m "Rename file5 to file6 with changes" &&
+ git diff-tree -r -M HEAD &&
+ level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") &&
+ test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 &&
+ git config git-p4.detectRenames $(($level + 2)) &&
+ git p4 submit &&
+ p4 filelog //depot/file6 &&
+ p4 filelog //depot/file6 | test_must_fail grep -q "branch from" &&
+
+ git mv file6 file7 &&
+ echo update >>file7 &&
+ git add file7 &&
+ git commit -a -m "Rename file6 to file7 with changes" &&
+ git diff-tree -r -M HEAD &&
+ level=$(git diff-tree -r -M HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/R0*//") &&
+ test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 &&
+ git config git-p4.detectRenames $(($level - 2)) &&
+ git p4 submit &&
+ p4 filelog //depot/file7 &&
+ p4 filelog //depot/file7 | grep -q "branch from //depot/file6"
+ )
+'
+
+# Copy a file and confirm that copy is not detected in P4.
+# Copy a file with detectCopies option enabled and confirm that copy is not
+# detected in P4.
+# Modify and copy a file with detectCopies option enabled and confirm that copy
+# is detected in P4.
+# Copy a file with detectCopies and detectCopiesHarder options enabled and
+# confirm that copy is detected in P4.
+# Modify and copy a file, configure a bigger threshold in detectCopies and
+# confirm that copy is not detected in P4.
+# Modify and copy a file, configure a smaller threshold in detectCopies and
+# confirm that copy is detected in P4.
+test_expect_success 'detect copies' '
+ git p4 clone --dest="$git" //depot@all &&
+ test_when_finished cleanup_git &&
+ (
+ cd "$git" &&
+ git config git-p4.skipSubmitEdit true &&
+
+ cp file2 file8 &&
+ git add file8 &&
+ git commit -a -m "Copy file2 to file8" &&
+ git diff-tree -r -C HEAD &&
+ git p4 submit &&
+ p4 filelog //depot/file8 &&
+ p4 filelog //depot/file8 | test_must_fail grep -q "branch from" &&
+
+ cp file2 file9 &&
+ git add file9 &&
+ git commit -a -m "Copy file2 to file9" &&
+ git diff-tree -r -C HEAD &&
+ git config git-p4.detectCopies true &&
+ git p4 submit &&
+ p4 filelog //depot/file9 &&
+ p4 filelog //depot/file9 | test_must_fail grep -q "branch from" &&
+
+ echo "file2" >>file2 &&
+ cp file2 file10 &&
+ git add file2 file10 &&
+ git commit -a -m "Modify and copy file2 to file10" &&
+ git diff-tree -r -C HEAD &&
+ git p4 submit &&
+ p4 filelog //depot/file10 &&
+ p4 filelog //depot/file10 | grep -q "branch from //depot/file" &&
+
+ cp file2 file11 &&
+ git add file11 &&
+ git commit -a -m "Copy file2 to file11" &&
+ git diff-tree -r -C --find-copies-harder HEAD &&
+ src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) &&
+ test "$src" = file10 &&
+ git config git-p4.detectCopiesHarder true &&
+ git p4 submit &&
+ p4 filelog //depot/file11 &&
+ p4 filelog //depot/file11 | grep -q "branch from //depot/file" &&
+
+ cp file2 file12 &&
+ echo "some text" >>file12 &&
+ git add file12 &&
+ git commit -a -m "Copy file2 to file12 with changes" &&
+ git diff-tree -r -C --find-copies-harder HEAD &&
+ level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") &&
+ test -n "$level" && test "$level" -gt 0 && test "$level" -lt 98 &&
+ src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) &&
+ test "$src" = file10 -o "$src" = file11 &&
+ git config git-p4.detectCopies $(($level + 2)) &&
+ git p4 submit &&
+ p4 filelog //depot/file12 &&
+ p4 filelog //depot/file12 | test_must_fail grep -q "branch from" &&
+
+ cp file2 file13 &&
+ echo "different text" >>file13 &&
+ git add file13 &&
+ git commit -a -m "Copy file2 to file13 with changes" &&
+ git diff-tree -r -C --find-copies-harder HEAD &&
+ level=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f1 | cut -d" " -f5 | sed "s/C0*//") &&
+ test -n "$level" && test "$level" -gt 2 && test "$level" -lt 100 &&
+ src=$(git diff-tree -r -C --find-copies-harder HEAD | sed 1d | cut -f2) &&
+ test "$src" = file10 -o "$src" = file11 -o "$src" = file12 &&
+ git config git-p4.detectCopies $(($level - 2)) &&
+ git p4 submit &&
+ p4 filelog //depot/file13 &&
+ p4 filelog //depot/file13 | grep -q "branch from //depot/file"
+ )
+'
+
+test_expect_success 'kill p4d' '
+ kill_p4d
+'
+
+test_done
--
1.7.11.rc2.72.gebb7ee5
^ permalink raw reply related [flat|nested] 14+ messages in thread