From: Anthony PERARD <anthony.perard@citrix.com>
To: Wei Wang <wei.wang2@amd.com>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>,
"qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
Subject: Re: [Qemu-devel] [PATCH] Fix xen pci passthrough
Date: Tue, 10 Jul 2012 14:05:39 +0100 [thread overview]
Message-ID: <4FFC28A3.5090306@citrix.com> (raw)
In-Reply-To: <1341920606-11942-1-git-send-email-wei.wang2@amd.com>
On 10/07/12 12:43, Wei Wang wrote:
> Hi, I find a passthrough issue in qemu when pci device has multiple mmio
> regions. In this case, the last few bytes of qmp response string are trimmed
> and then passthru fails with following output.
Could you compile libxl with DEBUG_RECEIVED (uncomment the #define in
tools/libxl/libxl_qmp.c) and then give the output of `xl -vvv create ...`.
Thanks,
> *** glibc detected *** xl: realloc(): invalid pointer: 0x0000000002163f90 ***
> ======= Backtrace: =========
> /lib64/libc.so.6(+0x74c06)[0x7f62970e4c06]
> /lib64/libc.so.6(+0x77d25)[0x7f62970e7d25]
> /lib/libxenlight.so.2.0(+0x28d02)[0x7f6297a78d02]
> /lib/libxenlight.so.2.0(+0x2eccf)[0x7f6297a7eccf]
> /lib/libxenlight.so.2.0(+0x2f2f6)[0x7f6297a7f2f6]
> /lib/libxenlight.so.2.0(+0x2fe18)[0x7f6297a7fe18]
> /lib/libxenlight.so.2.0(+0x20027)[0x7f6297a70027]
> /lib/libxenlight.so.2.0(+0x212a6)[0x7f6297a712a6]
> /lib/libxenlight.so.2.0(+0x19e82)[0x7f6297a69e82]
> /lib/libxenlight.so.2.0(+0x1c288)[0x7f6297a6c288]
> /lib/libxenlight.so.2.0(+0x1c2a8)[0x7f6297a6c2a8]
> /lib/libxenlight.so.2.0(+0x2657e)[0x7f6297a7657e]
> /lib/libxenlight.so.2.0(+0x34076)[0x7f6297a84076]
> /lib/libxenlight.so.2.0(libxl__fork_selfpipe_woken+0x92)[0x7f6297a84394]
> /lib/libxenlight.so.2.0(+0x3254a)[0x7f6297a8254a]
> /lib/libxenlight.so.2.0(+0x3276d)[0x7f6297a8276d]
> /lib/libxenlight.so.2.0(+0x33944)[0x7f6297a83944]
> /lib/libxenlight.so.2.0(+0x1c0a8)[0x7f6297a6c0a8]
> /lib/libxenlight.so.2.0(libxl_domain_create_new+0x14)[0x7f6297a6c14f]
> xl[0x40c1f2]
> xl[0x40fc94]
> xl[0x406c21]
> /lib64/libc.so.6(__libc_start_main+0xed)[0x7f629709123d]
> xl[0x406439]
>
> Attached patch can fix this issue.
>
> Thanks,
> Wei
>
> Signed-off-by: Wei Wang <wei.wang2@amd.com>
>
> ---
> monitor.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/monitor.c b/monitor.c
> index f6107ba..9f30f5f 100644
> --- a/monitor.c
> +++ b/monitor.c
> @@ -165,7 +165,7 @@ struct Monitor {
> int reset_seen;
> int flags;
> int suspend_cnt;
> - uint8_t outbuf[1024];
> + uint8_t outbuf[2048];
> int outbuf_index;
> ReadLineState *rs;
> MonitorControl *mc;
>
--
Anthony PERARD
WARNING: multiple messages have this Message-ID (diff)
From: Anthony PERARD <anthony.perard@citrix.com>
To: Wei Wang <wei.wang2@amd.com>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>,
"qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
Stefano Stabellini <Stefano.Stabellini@eu.citrix.com>
Subject: Re: [PATCH] Fix xen pci passthrough
Date: Tue, 10 Jul 2012 14:05:39 +0100 [thread overview]
Message-ID: <4FFC28A3.5090306@citrix.com> (raw)
In-Reply-To: <1341920606-11942-1-git-send-email-wei.wang2@amd.com>
On 10/07/12 12:43, Wei Wang wrote:
> Hi, I find a passthrough issue in qemu when pci device has multiple mmio
> regions. In this case, the last few bytes of qmp response string are trimmed
> and then passthru fails with following output.
Could you compile libxl with DEBUG_RECEIVED (uncomment the #define in
tools/libxl/libxl_qmp.c) and then give the output of `xl -vvv create ...`.
Thanks,
> *** glibc detected *** xl: realloc(): invalid pointer: 0x0000000002163f90 ***
> ======= Backtrace: =========
> /lib64/libc.so.6(+0x74c06)[0x7f62970e4c06]
> /lib64/libc.so.6(+0x77d25)[0x7f62970e7d25]
> /lib/libxenlight.so.2.0(+0x28d02)[0x7f6297a78d02]
> /lib/libxenlight.so.2.0(+0x2eccf)[0x7f6297a7eccf]
> /lib/libxenlight.so.2.0(+0x2f2f6)[0x7f6297a7f2f6]
> /lib/libxenlight.so.2.0(+0x2fe18)[0x7f6297a7fe18]
> /lib/libxenlight.so.2.0(+0x20027)[0x7f6297a70027]
> /lib/libxenlight.so.2.0(+0x212a6)[0x7f6297a712a6]
> /lib/libxenlight.so.2.0(+0x19e82)[0x7f6297a69e82]
> /lib/libxenlight.so.2.0(+0x1c288)[0x7f6297a6c288]
> /lib/libxenlight.so.2.0(+0x1c2a8)[0x7f6297a6c2a8]
> /lib/libxenlight.so.2.0(+0x2657e)[0x7f6297a7657e]
> /lib/libxenlight.so.2.0(+0x34076)[0x7f6297a84076]
> /lib/libxenlight.so.2.0(libxl__fork_selfpipe_woken+0x92)[0x7f6297a84394]
> /lib/libxenlight.so.2.0(+0x3254a)[0x7f6297a8254a]
> /lib/libxenlight.so.2.0(+0x3276d)[0x7f6297a8276d]
> /lib/libxenlight.so.2.0(+0x33944)[0x7f6297a83944]
> /lib/libxenlight.so.2.0(+0x1c0a8)[0x7f6297a6c0a8]
> /lib/libxenlight.so.2.0(libxl_domain_create_new+0x14)[0x7f6297a6c14f]
> xl[0x40c1f2]
> xl[0x40fc94]
> xl[0x406c21]
> /lib64/libc.so.6(__libc_start_main+0xed)[0x7f629709123d]
> xl[0x406439]
>
> Attached patch can fix this issue.
>
> Thanks,
> Wei
>
> Signed-off-by: Wei Wang <wei.wang2@amd.com>
>
> ---
> monitor.c | 2 +-
> 1 files changed, 1 insertions(+), 1 deletions(-)
>
> diff --git a/monitor.c b/monitor.c
> index f6107ba..9f30f5f 100644
> --- a/monitor.c
> +++ b/monitor.c
> @@ -165,7 +165,7 @@ struct Monitor {
> int reset_seen;
> int flags;
> int suspend_cnt;
> - uint8_t outbuf[1024];
> + uint8_t outbuf[2048];
> int outbuf_index;
> ReadLineState *rs;
> MonitorControl *mc;
>
--
Anthony PERARD
next prev parent reply other threads:[~2012-07-10 13:12 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-10 11:43 [Qemu-devel] [PATCH] Fix xen pci passthrough Wei Wang
2012-07-10 11:43 ` Wei Wang
2012-07-10 13:05 ` Anthony PERARD [this message]
2012-07-10 13:05 ` Anthony PERARD
2012-07-10 13:35 ` [Qemu-devel] " Wei Wang
2012-07-10 13:35 ` Wei Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FFC28A3.5090306@citrix.com \
--to=anthony.perard@citrix.com \
--cc=Stefano.Stabellini@eu.citrix.com \
--cc=qemu-devel@nongnu.org \
--cc=wei.wang2@amd.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.