Re: [Xenomai] Xenomai 2.6.0 installation Error

[Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>]

On 07/13/2012 07:51 AM, Ilesh patel wrote:
> Hello,
> 
> Thank you for your kind reply
> 
> I understand the error.
> 
> I read the README file in /arch/x86/patches/  The README file shows
> "Xenomai supports the x86_64,x86 architecture starting with the v2.6
> Linux kernel series." and my krenel is V2.6.32-generic.

Ok, even if the README file is short, you seem not patient enough to
read it. Some I am going to quote the relevant parts:

"This support is provided by the interrupt pipeline (aka I-pipe) in the
form of a kernel patch you have to apply against a VANILLA kernel
tree, before you attempt to compile the Xenomai codebase against the
latter kernel.

Apply one of the patches found into this directory against the
CORRESPONDING kernel release."

So: for a vanilla 2.6.32 kernel, you have to use a patch with 2.6.32 in
the name. And the patch will apply only to a vanilla kernel, for any
other kernels, it will not necessarily apply.

Please no private mail.

-- 
                                                                Gilles.