From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Subodh Nijsure <snijsure@grid-net.com>
Cc: Fabio Estevam <fabio.estevam@freescale.com>,
marex@denx.de, kernel@pengutronix.de, rob.herring@calxeda.com,
Grant Likely <grant.likely@secretlab.ca>,
linux-serial@vger.kernel.org, shawn.guo@linaro.org,
"Matt@grid-net.com" <Matt@grid-net.com>,
linux-arm-kernel@lists.infradead.org,
Alan Cox <alan@linux.intel.com>
Subject: Re: [PATCH v4 2/2] serial: mxs-auart: Allow device tree probing
Date: Fri, 13 Jul 2012 12:33:12 +0200 [thread overview]
Message-ID: <4FFFF968.5000801@pengutronix.de> (raw)
In-Reply-To: <4FDF929B.7000809@grid-net.com>
[-- Attachment #1: Type: text/plain, Size: 6431 bytes --]
On 06/18/2012 10:42 PM, Subodh Nijsure wrote:
>
> If one were to try run console on one of the /dev/ttyAPP* ports, as is
> the case for hardware I am working with, console output wouldn't show up
> without the following diff:
>
> Let me know if should send formal patch or we can include it as part of v5?
Has this patch been applied?
Marc
>
> diff --git a/drivers/tty/serial/mxs-auart.c
> b/drivers/tty/serial/mxs-auart.c
> index ca3d25e..2ced332 100644
> --- a/drivers/tty/serial/mxs-auart.c
> +++ b/drivers/tty/serial/mxs-auart.c
> @@ -761,7 +761,7 @@ static int __devinit mxs_auart_probe(struct
> platform_device *pdev)
>
> platform_set_drvdata(pdev, s);
>
> - auart_port[pdev->id] = s;
> + auart_port[s->port.line] = s;
>
> mxs_auart_reset(&s->port)
>
> -Subodh
>
> On 06/18/2012 06:06 AM, Fabio Estevam wrote:
>> Allow device tree probing.
>>
>> Cc: Grant Likely<grant.likely@secretlab.ca>
>> Cc: Rob Herring<rob.herring@calxeda.com>
>> Cc: Alan Cox<alan@linux.intel.com>
>> Cc:<linux-serial@vger.kernel.org>
>> Signed-off-by: Fabio Estevam<fabio.estevam@freescale.com>
>> ---
>> Changes since v3:
>> - Remove unneeded mxs_auart_devtype
>> Changes since v2:
>> - Change compatible string
>> - Add aliases information in bindings doc
>> - Remove unneeded mxs_auart_probe_pdev function
>> - Remove "ifdef CONFIG_OF"
>> - Remove of_match_ptr wrapper
>> Changes since v1:
>> - Merged patches 3 and 5 from v1 into this one
>> .../bindings/tty/serial/fsl-mxs-auart.txt | 27 +++++++++++++
>> drivers/tty/serial/mxs-auart.c | 40
>> +++++++++++++++++++-
>> 2 files changed, 66 insertions(+), 1 deletions(-)
>> create mode 100644
>> Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
>>
>> diff --git
>> a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
>> b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
>> new file mode 100644
>> index 0000000..2ee903f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
>> @@ -0,0 +1,27 @@
>> +* Freescale MXS Application UART (AUART)
>> +
>> +Required properties:
>> +- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
>> + imx23 and imx28.
>> +- reg : Address and length of the register set for the device
>> +- interrupts : Should contain the auart interrupt numbers
>> +
>> +Example:
>> +auart0: serial@8006a000 {
>> + compatible = "fsl,imx28-auart", "fsl,imx23-auart";
>> + reg =<0x8006a000 0x2000>;
>> + interrupts =<112 70 71>;
>> +};
>> +
>> +Note: Each auart port should have an alias correctly numbered in
>> "aliases"
>> +node.
>> +
>> +Example:
>> +
>> +aliases {
>> + serial0 =&auart0;
>> + serial1 =&auart1;
>> + serial2 =&auart2;
>> + serial3 =&auart3;
>> + serial4 =&auart4;
>> +};
>> diff --git a/drivers/tty/serial/mxs-auart.c
>> b/drivers/tty/serial/mxs-auart.c
>> index ec56d83..103087d 100644
>> --- a/drivers/tty/serial/mxs-auart.c
>> +++ b/drivers/tty/serial/mxs-auart.c
>> @@ -33,6 +33,7 @@
>> #include<linux/delay.h>
>> #include<linux/io.h>
>> #include<linux/pinctrl/consumer.h>
>> +#include<linux/of_device.h>
>>
>> #include<asm/cacheflush.h>
>>
>> @@ -675,6 +676,30 @@ static struct uart_driver auart_driver = {
>> #endif
>> };
>>
>> +/*
>> + * This function returns 1 if pdev isn't a device instatiated by dt,
>> 0 if it
>> + * could successfully get all information from dt or a negative errno.
>> + */
>> +static int serial_mxs_probe_dt(struct mxs_auart_port *s,
>> + struct platform_device *pdev)
>> +{
>> + struct device_node *np = pdev->dev.of_node;
>> + int ret;
>> +
>> + if (!np)
>> + /* no device tree device */
>> + return 1;
>> +
>> + ret = of_alias_get_id(np, "serial");
>> + if (ret< 0) {
>> + dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
>> + return ret;
>> + }
>> + s->port.line = ret;
>> +
>> + return 0;
>> +}
>> +
>> static int __devinit mxs_auart_probe(struct platform_device *pdev)
>> {
>> struct mxs_auart_port *s;
>> @@ -689,6 +714,12 @@ static int __devinit mxs_auart_probe(struct
>> platform_device *pdev)
>> goto out;
>> }
>>
>> + ret = serial_mxs_probe_dt(s, pdev);
>> + if (ret> 0)
>> + s->port.line = pdev->id< 0 ? 0 : pdev->id;
>> + else if (ret< 0)
>> + goto out_free;
>> +
>> pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
>> if (IS_ERR(pinctrl)) {
>> ret = PTR_ERR(pinctrl);
>> @@ -711,7 +742,6 @@ static int __devinit mxs_auart_probe(struct
>> platform_device *pdev)
>> s->port.membase = ioremap(r->start, resource_size(r));
>> s->port.ops =&mxs_auart_ops;
>> s->port.iotype = UPIO_MEM;
>> - s->port.line = pdev->id< 0 ? 0 : pdev->id;
>> s->port.fifosize = 16;
>> s->port.uartclk = clk_get_rate(s->clk);
>> s->port.type = PORT_IMX;
>> @@ -769,12 +799,19 @@ static int __devexit mxs_auart_remove(struct
>> platform_device *pdev)
>> return 0;
>> }
>>
>> +static struct of_device_id mxs_auart_dt_ids[] = {
>> + { .compatible = "fsl,imx23-auart", },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
>> +
>> static struct platform_driver mxs_auart_driver = {
>> .probe = mxs_auart_probe,
>> .remove = __devexit_p(mxs_auart_remove),
>> .driver = {
>> .name = "mxs-auart",
>> .owner = THIS_MODULE,
>> + .of_match_table = mxs_auart_dt_ids,
>> },
>> };
>>
>> @@ -807,3 +844,4 @@ module_init(mxs_auart_init);
>> module_exit(mxs_auart_exit);
>> MODULE_LICENSE("GPL");
>> MODULE_DESCRIPTION("Freescale MXS application uart driver");
>> +MODULE_ALIAS("platform:mxs-auart");
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 262 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: mkl@pengutronix.de (Marc Kleine-Budde)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 2/2] serial: mxs-auart: Allow device tree probing
Date: Fri, 13 Jul 2012 12:33:12 +0200 [thread overview]
Message-ID: <4FFFF968.5000801@pengutronix.de> (raw)
In-Reply-To: <4FDF929B.7000809@grid-net.com>
On 06/18/2012 10:42 PM, Subodh Nijsure wrote:
>
> If one were to try run console on one of the /dev/ttyAPP* ports, as is
> the case for hardware I am working with, console output wouldn't show up
> without the following diff:
>
> Let me know if should send formal patch or we can include it as part of v5?
Has this patch been applied?
Marc
>
> diff --git a/drivers/tty/serial/mxs-auart.c
> b/drivers/tty/serial/mxs-auart.c
> index ca3d25e..2ced332 100644
> --- a/drivers/tty/serial/mxs-auart.c
> +++ b/drivers/tty/serial/mxs-auart.c
> @@ -761,7 +761,7 @@ static int __devinit mxs_auart_probe(struct
> platform_device *pdev)
>
> platform_set_drvdata(pdev, s);
>
> - auart_port[pdev->id] = s;
> + auart_port[s->port.line] = s;
>
> mxs_auart_reset(&s->port)
>
> -Subodh
>
> On 06/18/2012 06:06 AM, Fabio Estevam wrote:
>> Allow device tree probing.
>>
>> Cc: Grant Likely<grant.likely@secretlab.ca>
>> Cc: Rob Herring<rob.herring@calxeda.com>
>> Cc: Alan Cox<alan@linux.intel.com>
>> Cc:<linux-serial@vger.kernel.org>
>> Signed-off-by: Fabio Estevam<fabio.estevam@freescale.com>
>> ---
>> Changes since v3:
>> - Remove unneeded mxs_auart_devtype
>> Changes since v2:
>> - Change compatible string
>> - Add aliases information in bindings doc
>> - Remove unneeded mxs_auart_probe_pdev function
>> - Remove "ifdef CONFIG_OF"
>> - Remove of_match_ptr wrapper
>> Changes since v1:
>> - Merged patches 3 and 5 from v1 into this one
>> .../bindings/tty/serial/fsl-mxs-auart.txt | 27 +++++++++++++
>> drivers/tty/serial/mxs-auart.c | 40
>> +++++++++++++++++++-
>> 2 files changed, 66 insertions(+), 1 deletions(-)
>> create mode 100644
>> Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
>>
>> diff --git
>> a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
>> b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
>> new file mode 100644
>> index 0000000..2ee903f
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
>> @@ -0,0 +1,27 @@
>> +* Freescale MXS Application UART (AUART)
>> +
>> +Required properties:
>> +- compatible : Should be "fsl,<soc>-auart". The supported SoCs include
>> + imx23 and imx28.
>> +- reg : Address and length of the register set for the device
>> +- interrupts : Should contain the auart interrupt numbers
>> +
>> +Example:
>> +auart0: serial at 8006a000 {
>> + compatible = "fsl,imx28-auart", "fsl,imx23-auart";
>> + reg =<0x8006a000 0x2000>;
>> + interrupts =<112 70 71>;
>> +};
>> +
>> +Note: Each auart port should have an alias correctly numbered in
>> "aliases"
>> +node.
>> +
>> +Example:
>> +
>> +aliases {
>> + serial0 =&auart0;
>> + serial1 =&auart1;
>> + serial2 =&auart2;
>> + serial3 =&auart3;
>> + serial4 =&auart4;
>> +};
>> diff --git a/drivers/tty/serial/mxs-auart.c
>> b/drivers/tty/serial/mxs-auart.c
>> index ec56d83..103087d 100644
>> --- a/drivers/tty/serial/mxs-auart.c
>> +++ b/drivers/tty/serial/mxs-auart.c
>> @@ -33,6 +33,7 @@
>> #include<linux/delay.h>
>> #include<linux/io.h>
>> #include<linux/pinctrl/consumer.h>
>> +#include<linux/of_device.h>
>>
>> #include<asm/cacheflush.h>
>>
>> @@ -675,6 +676,30 @@ static struct uart_driver auart_driver = {
>> #endif
>> };
>>
>> +/*
>> + * This function returns 1 if pdev isn't a device instatiated by dt,
>> 0 if it
>> + * could successfully get all information from dt or a negative errno.
>> + */
>> +static int serial_mxs_probe_dt(struct mxs_auart_port *s,
>> + struct platform_device *pdev)
>> +{
>> + struct device_node *np = pdev->dev.of_node;
>> + int ret;
>> +
>> + if (!np)
>> + /* no device tree device */
>> + return 1;
>> +
>> + ret = of_alias_get_id(np, "serial");
>> + if (ret< 0) {
>> + dev_err(&pdev->dev, "failed to get alias id: %d\n", ret);
>> + return ret;
>> + }
>> + s->port.line = ret;
>> +
>> + return 0;
>> +}
>> +
>> static int __devinit mxs_auart_probe(struct platform_device *pdev)
>> {
>> struct mxs_auart_port *s;
>> @@ -689,6 +714,12 @@ static int __devinit mxs_auart_probe(struct
>> platform_device *pdev)
>> goto out;
>> }
>>
>> + ret = serial_mxs_probe_dt(s, pdev);
>> + if (ret> 0)
>> + s->port.line = pdev->id< 0 ? 0 : pdev->id;
>> + else if (ret< 0)
>> + goto out_free;
>> +
>> pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
>> if (IS_ERR(pinctrl)) {
>> ret = PTR_ERR(pinctrl);
>> @@ -711,7 +742,6 @@ static int __devinit mxs_auart_probe(struct
>> platform_device *pdev)
>> s->port.membase = ioremap(r->start, resource_size(r));
>> s->port.ops =&mxs_auart_ops;
>> s->port.iotype = UPIO_MEM;
>> - s->port.line = pdev->id< 0 ? 0 : pdev->id;
>> s->port.fifosize = 16;
>> s->port.uartclk = clk_get_rate(s->clk);
>> s->port.type = PORT_IMX;
>> @@ -769,12 +799,19 @@ static int __devexit mxs_auart_remove(struct
>> platform_device *pdev)
>> return 0;
>> }
>>
>> +static struct of_device_id mxs_auart_dt_ids[] = {
>> + { .compatible = "fsl,imx23-auart", },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, mxs_auart_dt_ids);
>> +
>> static struct platform_driver mxs_auart_driver = {
>> .probe = mxs_auart_probe,
>> .remove = __devexit_p(mxs_auart_remove),
>> .driver = {
>> .name = "mxs-auart",
>> .owner = THIS_MODULE,
>> + .of_match_table = mxs_auart_dt_ids,
>> },
>> };
>>
>> @@ -807,3 +844,4 @@ module_init(mxs_auart_init);
>> module_exit(mxs_auart_exit);
>> MODULE_LICENSE("GPL");
>> MODULE_DESCRIPTION("Freescale MXS application uart driver");
>> +MODULE_ALIAS("platform:mxs-auart");
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Pengutronix e.K. | Marc Kleine-Budde |
Industrial Linux Solutions | Phone: +49-231-2826-924 |
Vertretung West/Dortmund | Fax: +49-5121-206917-5555 |
Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 262 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20120713/6c8b519f/attachment.sig>
next prev parent reply other threads:[~2012-07-13 10:33 UTC|newest]
Thread overview: 37+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-15 15:35 [PATCH v3 1/2] ARM: dts: mx28evk: Add auart0 and auart3 support Fabio Estevam
2012-06-15 15:35 ` [PATCH v3 2/2] serial: mxs-auart: Allow device tree probing Fabio Estevam
2012-06-15 15:35 ` Fabio Estevam
2012-06-15 15:48 ` Marek Vasut
2012-06-15 15:48 ` Marek Vasut
2012-06-15 16:06 ` Shawn Guo
2012-06-15 16:06 ` Shawn Guo
2012-06-15 16:11 ` Fabio Estevam
2012-06-15 16:11 ` Fabio Estevam
2012-06-15 16:16 ` Marek Vasut
2012-06-15 16:16 ` Marek Vasut
2012-06-15 16:18 ` Fabio Estevam
2012-06-15 16:18 ` Fabio Estevam
2012-06-15 17:00 ` Marek Vasut
2012-06-15 17:00 ` Marek Vasut
2012-06-16 2:01 ` Shawn Guo
2012-06-16 2:01 ` Shawn Guo
2012-06-16 1:59 ` Shawn Guo
2012-06-16 1:59 ` Shawn Guo
2012-06-15 15:48 ` [PATCH v3 1/2] ARM: dts: mx28evk: Add auart0 and auart3 support Marek Vasut
2012-06-15 16:03 ` Shawn Guo
2012-06-18 13:06 ` [PATCH v4 2/2] serial: mxs-auart: Allow device tree probing Fabio Estevam
2012-06-18 13:06 ` Fabio Estevam
2012-06-18 13:33 ` Shawn Guo
2012-06-18 13:33 ` Shawn Guo
2012-06-18 13:36 ` Marek Vasut
2012-06-18 13:36 ` Marek Vasut
2012-06-18 15:25 ` Greg Kroah-Hartman
2012-06-18 15:25 ` Greg Kroah-Hartman
2012-06-18 20:42 ` Subodh Nijsure
2012-06-18 20:42 ` Subodh Nijsure
2012-06-18 20:50 ` Fabio Estevam
2012-06-18 20:50 ` Fabio Estevam
2012-07-13 10:33 ` Marc Kleine-Budde [this message]
2012-07-13 10:33 ` Marc Kleine-Budde
2012-07-13 10:35 ` Marc Kleine-Budde
2012-07-13 10:35 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4FFFF968.5000801@pengutronix.de \
--to=mkl@pengutronix.de \
--cc=Matt@grid-net.com \
--cc=alan@linux.intel.com \
--cc=fabio.estevam@freescale.com \
--cc=grant.likely@secretlab.ca \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-serial@vger.kernel.org \
--cc=marex@denx.de \
--cc=rob.herring@calxeda.com \
--cc=shawn.guo@linaro.org \
--cc=snijsure@grid-net.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.