Re:[PATCH 1/2] drm/rockchip: vop2: fix rk3588 dp+dsi maxclk verification

["Andy Yan" <andyshrk@163.com>]

+ Sebastina,
Hi Sebastian,  I think you also need this patch when you test DSI on rk3588 with  DSI2 support patch from Heiko.

At 2024-04-26 03:55:05, "Heiko Stuebner" <heiko@sntech.de> wrote:
>From: Heiko Stuebner <heiko.stuebner@cherry.de>
>
>The clock is in Hz while the value checked against is in kHz, so
>actual frequencies will never be able to be below to max value.
>Fix this by specifying the max-value in Hz too.
>
>Fixes: 5a028e8f062f ("drm/rockchip: vop2: Add support for rk3588")
>Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
>---
> drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
>diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>index 9bee1fd88e6a2..523880a4e8e74 100644
>--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
>@@ -1719,7 +1719,7 @@ static unsigned long rk3588_calc_cru_cfg(struct vop2_video_port *vp, int id,
> 		else
> 			dclk_out_rate = v_pixclk >> 2;
> 
>-		dclk_rate = rk3588_calc_dclk(dclk_out_rate, 600000);
>+		dclk_rate = rk3588_calc_dclk(dclk_out_rate, 600000000);
> 		if (!dclk_rate) {
> 			drm_err(vop2->drm, "DP dclk_out_rate out of range, dclk_out_rate: %ld KHZ\n",
> 				dclk_out_rate);
>@@ -1736,7 +1736,7 @@ static unsigned long rk3588_calc_cru_cfg(struct vop2_video_port *vp, int id,
> 		 * dclk_rate = N * dclk_core_rate N = (1,2,4 ),
> 		 * we get a little factor here
> 		 */
>-		dclk_rate = rk3588_calc_dclk(dclk_out_rate, 600000);
>+		dclk_rate = rk3588_calc_dclk(dclk_out_rate, 600000000);
> 		if (!dclk_rate) {
> 			drm_err(vop2->drm, "MIPI dclk out of range, dclk_out_rate: %ld KHZ\n",
> 				dclk_out_rate);
>-- 
>2.39.2