* [Qemu-devel] ops sse.h:574: error: unable to find a register to spill in class âGENERAL REGSâ
@ 2005-09-05 6:51 Hans Christian Studt
2005-09-05 7:42 ` Guillaume POIRIER
0 siblings, 1 reply; 5+ messages in thread
From: Hans Christian Studt @ 2005-09-05 6:51 UTC (permalink / raw)
To: qemu-devel
I get the error below when trying to compile version 0.7.2 with kqemu.
I need help to figure out what the problem may be.
(/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2) $./configure
Install prefix /usr/local
BIOS directory /usr/local/share/qemu
binary directory /usr/local/bin
Manual directory /usr/local/share/man
ELF interp prefix /usr/gnemul/qemu-%M
Source path /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2
C compiler gcc
Host C compiler gcc
make make
host CPU i386
host big endian no
target list i386-user arm-user armeb-user sparc-user ppc-user i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu mips-softmmu
gprof enabled no
static build no
SDL support yes
SDL static link yes
mingw32 support no
Adlib support no
FMOD support no
kqemu support yes
KQEMU Linux module configuration:
kernel sources /lib/modules/2.6.12-1.1398_FC4/build
kbuild type 2.6
søp 04 20:06:16 (hcs)@(tux1700/2.6.12-1.1398_FC4)on(pts/35):
(/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2) $make
:
:
:
gcc -Wall -O2 -g -fno-strict-aliasing -fomit-frame-pointer -mpreferred-stack-boundary=2 -falign-functions=0 -fno-gcse -fno-reorder-blocks -fno-optimize-sibling-calls -I. -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386 -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2 -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/linux-user -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/linux-user/i386 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/fpu -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/slirp -c -o op.o /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/op.c
/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h: In function â_pshufw_mmxâ
/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: error: unable to find a register to spill in class âNERAL_REGSâ
/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: error: this is the insn:
(insn:HI 18 17 19 0 /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:569 (set (strict_low_part (subreg:HI (reg/v:DI 63 [ r ]) 0))
(mem/s/j:HI (plus:SI (mult:SI (reg:SI 64)
(const_int 2 [0x2]))
(reg/v/f:SI 59 [ s ])) [0 <variable>._w S2 A16])) 41 {*movstricthi_1} (insn_list:REG_DEP_TRUE 16 (insn_list:REG_DEP_TRUE 12 (insn_list:REG_DEP_TRUE 53 (nil))))
(expr_list:REG_DEAD (reg:SI 64)
(nil)))
/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: confused by earlier errors, bailing out
make[1]: *** [op.o] Error 1
make[1]: Leaving directory `/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/i386-user'
make: *** [all] Error 1
Mon Sep 05 08:41:16 (hcs)@(tux1700/2.6.12-1.1398_FC4)on(pts/35):
Mvh Hans Christian Studt
Mobile +45 29 23 54 14
hc[AT]studt[DOT]dk http://hc.studt.dk
Powered by Linux 2.6.12-1.1398_FC4
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [Qemu-devel] ops sse.h:574: error: unable to find a register to spill in class âGENERAL REGSâ
2005-09-05 6:51 [Qemu-devel] ops sse.h:574: error: unable to find a register to spill in class âGENERAL REGSâ Hans Christian Studt
@ 2005-09-05 7:42 ` Guillaume POIRIER
0 siblings, 0 replies; 5+ messages in thread
From: Guillaume POIRIER @ 2005-09-05 7:42 UTC (permalink / raw)
To: hc, qemu-devel
Hi,
On 9/5/05, Hans Christian Studt <hcstudt@post10.tele.dk> wrote:
> I get the error below when trying to compile version 0.7.2 with kqemu.
>
> I need help to figure out what the problem may be.
>
> (/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2) $./configure
> Install prefix /usr/local
> BIOS directory /usr/local/share/qemu
> binary directory /usr/local/bin
> Manual directory /usr/local/share/man
> ELF interp prefix /usr/gnemul/qemu-%M
> Source path /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2
> C compiler gcc
> Host C compiler gcc
> make make
> host CPU i386
> host big endian no
> target list i386-user arm-user armeb-user sparc-user ppc-user i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu mips-softmmu
> gprof enabled no
> static build no
> SDL support yes
> SDL static link yes
> mingw32 support no
> Adlib support no
> FMOD support no
> kqemu support yes
>
> KQEMU Linux module configuration:
> kernel sources /lib/modules/2.6.12-1.1398_FC4/build
> kbuild type 2.6
> søp 04 20:06:16 (hcs)@(tux1700/2.6.12-1.1398_FC4)on(pts/35):
> (/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2) $make
> :
> :
> :
> gcc -Wall -O2 -g -fno-strict-aliasing -fomit-frame-pointer -mpreferred-stack-boundary=2 -falign-functions=0 -fno-gcse -fno-reorder-blocks -fno-optimize-sibling-calls -I. -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386 -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2 -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/linux-user -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/linux-user/i386 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/fpu -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/slirp -c -o op.o /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/op.c
> /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h: In function â_pshufw_mmxâ
> /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: error: unable to find a register to spill in class âNERAL_REGSâ
> /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: error: this is the insn:
> (insn:HI 18 17 19 0 /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:569 (set (strict_low_part (subreg:HI (reg/v:DI 63 [ r ]) 0))
> (mem/s/j:HI (plus:SI (mult:SI (reg:SI 64)
> (const_int 2 [0x2]))
> (reg/v/f:SI 59 [ s ])) [0 <variable>._w S2 A16])) 41 {*movstricthi_1} (insn_list:REG_DEP_TRUE 16 (insn_list:REG_DEP_TRUE 12 (insn_list:REG_DEP_TRUE 53 (nil))))
> (expr_list:REG_DEAD (reg:SI 64)
> (nil)))
> /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: confused by earlier errors, bailing out
> make[1]: *** [op.o] Error 1
> make[1]: Leaving directory `/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/i386-user'
> make: *** [all] Error 1
> Mon Sep 05 08:41:16 (hcs)@(tux1700/2.6.12-1.1398_FC4)on(pts/35):
I don't see what version you're using. Please try with a different
version, which may do the trick.
Guillaume
--
Reading doesn't hurt, really!
-- Dominik 'Rathann' Mierzejewski
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Qemu-devel] ops sse.h:574: error: unable to find a register to spill in class âGENERAL REGSâ
@ 2005-09-05 7:58 Hans Christian Studt
2005-09-05 9:20 ` Guillaume POIRIER
2005-09-05 9:52 ` Hetz Ben Hamo
0 siblings, 2 replies; 5+ messages in thread
From: Hans Christian Studt @ 2005-09-05 7:58 UTC (permalink / raw)
To: qemu-devel
Guillaume POIRIER wrote:
>Hi,
>
>On 9/5/05, Hans Christian Studt <hcstudt@post10.tele.dk> wrote:
>
>>I get the error below when trying to compile version 0.7.2 with kqemu.
>>
>>I need help to figure out what the problem may be.
>>
>>(/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2) $./configure
>>Install prefix /usr/local
>>BIOS directory /usr/local/share/qemu
>>binary directory /usr/local/bin
>>Manual directory /usr/local/share/man
>>ELF interp prefix /usr/gnemul/qemu-%M
>>Source path /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2
>>C compiler gcc
>>Host C compiler gcc
>>make make
>>host CPU i386
>>host big endian no
>>target list i386-user arm-user armeb-user sparc-user ppc-user i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu mips-softmmu
>>gprof enabled no
>>static build no
>>SDL support yes
>>SDL static link yes
>>mingw32 support no
>>Adlib support no
>>FMOD support no
>>kqemu support yes
>>
>>KQEMU Linux module configuration:
>>kernel sources /lib/modules/2.6.12-1.1398_FC4/build
>>kbuild type 2.6
>>søp 04 20:06:16 (hcs)@(tux1700/2.6.12-1.1398_FC4)on(pts/35):
>>(/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2) $make
>>:
>>:
>>:
>>gcc -Wall -O2 -g -fno-strict-aliasing -fomit-frame-pointer -mpreferred-stack-boundary=2 -falign-functions=0 -fno-gcse -fno-reorder-blocks -fno-optimize-sibling-calls -I. -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386 -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2 -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/linux-user -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/linux-user/i386 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/fpu -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/slirp -c -o op.o /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/op.c
>>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h: In function â_pshufw_mmxâ
>>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: error: unable to find a register to spill in class âNERAL_REGSâ
>>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: error: this is the insn:
>>(insn:HI 18 17 19 0 /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:569 (set (strict_low_part (subreg:HI (reg/v:DI 63 [ r ]) 0))
>> (mem/s/j:HI (plus:SI (mult:SI (reg:SI 64)
>> (const_int 2 [0x2]))
>> (reg/v/f:SI 59 [ s ])) [0 <variable>._w S2 A16])) 41 {*movstricthi_1} (insn_list:REG_DEP_TRUE 16 (insn_list:REG_DEP_TRUE 12 (insn_list:REG_DEP_TRUE 53 (nil))))
>> (expr_list:REG_DEAD (reg:SI 64)
>> (nil)))
>>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: confused by earlier errors, bailing out
>>make[1]: *** [op.o] Error 1
>>make[1]: Leaving directory `/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/i386-user'
>>make: *** [all] Error 1
>>Mon Sep 05 08:41:16 (hcs)@(tux1700/2.6.12-1.1398_FC4)on(pts/35):
>
>
>I don't see what version you're using. Please try with a different
>version, which may do the trick.
>
>Guillaume
I am using these versions
-rw-rw-r-- 1 hcs 79314 Sep 4 19:31 kqemu-0.7.2.tar.gz
-rw-rw-r-- 1 hcs 1341993 Sep 4 19:37 qemu-0.7.2.tar.gz
$head Changelog
version 0.7.2:
- x86_64 fixes (Win2000 and Linux 2.6 boot in 32 bit)
- merge self modifying code handling in dirty ram page mecanism.
$head kqemu/Changelog
version 0.7.2:
- more precise segmentation support (aka Win98 support)
- new API to track dirty RAM pages
Linux is Fedora Core 4
kernel 2.6.12-1.1398_FC4
So which other versions should I try out ?
Mvh Hans Christian Studt
Mobile +45 29 23 54 14
hc[AT]studt[DOT]dk http://hc.studt.dk
Powered by Linux 2.6.12-1.1398_FC4
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [Qemu-devel] ops sse.h:574: error: unable to find a register to spill in class âGENERAL REGSâ
2005-09-05 7:58 Hans Christian Studt
@ 2005-09-05 9:20 ` Guillaume POIRIER
2005-09-05 9:52 ` Hetz Ben Hamo
1 sibling, 0 replies; 5+ messages in thread
From: Guillaume POIRIER @ 2005-09-05 9:20 UTC (permalink / raw)
To: hc, qemu-devel
Hi,
On 9/5/05, Hans Christian Studt <hcstudt@post10.tele.dk> wrote:
> Guillaume POIRIER wrote:
>
> >Hi,
> >
> >On 9/5/05, Hans Christian Studt <hcstudt@post10.tele.dk> wrote:
> >
> >>I get the error below when trying to compile version 0.7.2 with kqemu.
> >>
> >>I need help to figure out what the problem may be.
> >>
> >>(/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2) $./configure
> >>Install prefix /usr/local
> >>BIOS directory /usr/local/share/qemu
> >>binary directory /usr/local/bin
> >>Manual directory /usr/local/share/man
> >>ELF interp prefix /usr/gnemul/qemu-%M
> >>Source path /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2
> >>C compiler gcc
> >>Host C compiler gcc
> >>make make
> >>host CPU i386
> >>host big endian no
> >>target list i386-user arm-user armeb-user sparc-user ppc-user i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu mips-softmmu
> >>gprof enabled no
> >>static build no
> >>SDL support yes
> >>SDL static link yes
> >>mingw32 support no
> >>Adlib support no
> >>FMOD support no
> >>kqemu support yes
> >>
> >>KQEMU Linux module configuration:
> >>kernel sources /lib/modules/2.6.12-1.1398_FC4/build
> >>kbuild type 2.6
> >>søp 04 20:06:16 (hcs)@(tux1700/2.6.12-1.1398_FC4)on(pts/35):
> >>(/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2) $make
> >>:
> >>:
> >>:
> >>gcc -Wall -O2 -g -fno-strict-aliasing -fomit-frame-pointer -mpreferred-stack-boundary=2 -falign-functions=0 -fno-gcse -fno-reorder-blocks -fno-optimize-sibling-calls -I. -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386 -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2 -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/linux-user -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/linux-user/i386 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/fpu -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/slirp -c -o op.o /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/op.c
> >>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h: In function â_pshufw_mmxâ
> >>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: error: unable to find a register to spill in class âNERAL_REGSâ
> >>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: error: this is the insn:
> >>(insn:HI 18 17 19 0 /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:569 (set (strict_low_part (subreg:HI (reg/v:DI 63 [ r ]) 0))
> >> (mem/s/j:HI (plus:SI (mult:SI (reg:SI 64)
> >> (const_int 2 [0x2]))
> >> (reg/v/f:SI 59 [ s ])) [0 <variable>._w S2 A16])) 41 {*movstricthi_1} (insn_list:REG_DEP_TRUE 16 (insn_list:REG_DEP_TRUE 12 (insn_list:REG_DEP_TRUE 53 (nil))))
> >> (expr_list:REG_DEAD (reg:SI 64)
> >> (nil)))
> >>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: confused by earlier errors, bailing out
> >>make[1]: *** [op.o] Error 1
> >>make[1]: Leaving directory `/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/i386-user'
> >>make: *** [all] Error 1
> >>Mon Sep 05 08:41:16 (hcs)@(tux1700/2.6.12-1.1398_FC4)on(pts/35):
> >
> >
> >I don't see what version you're using. Please try with a different
> >version, which may do the trick.
> >
> >Guillaume
> I am using these versions
>
> -rw-rw-r-- 1 hcs 79314 Sep 4 19:31 kqemu-0.7.2.tar.gz
> -rw-rw-r-- 1 hcs 1341993 Sep 4 19:37 qemu-0.7.2.tar.gz
>
> $head Changelog
> version 0.7.2:
>
> - x86_64 fixes (Win2000 and Linux 2.6 boot in 32 bit)
> - merge self modifying code handling in dirty ram page mecanism.
>
> $head kqemu/Changelog
> version 0.7.2:
>
> - more precise segmentation support (aka Win98 support)
> - new API to track dirty RAM pages
>
> Linux is Fedora Core 4
> kernel 2.6.12-1.1398_FC4
>
> So which other versions should I try out ?
Sorry (too early in the morning), I forgot to type one word: try a
different version of GCC. gcc-3.4 and 2.95 should work better than,
say, gcc-4.0.
:-)
--
Reading doesn't hurt, really!
-- Dominik 'Rathann' Mierzejewski
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [Qemu-devel] ops sse.h:574: error: unable to find a register to spill in class âGENERAL REGSâ
2005-09-05 7:58 Hans Christian Studt
2005-09-05 9:20 ` Guillaume POIRIER
@ 2005-09-05 9:52 ` Hetz Ben Hamo
1 sibling, 0 replies; 5+ messages in thread
From: Hetz Ben Hamo @ 2005-09-05 9:52 UTC (permalink / raw)
To: hc, qemu-devel
Let me guess - you're using gcc 4?
GCC 4 and QEMU don' play together very well.
If you use GCC 4, then I suggest you should install the
gcc-compat-devel (and gcc-compat) RPMS and compile it with the gcc 3.x
compiler.
Hetz
On 9/5/05, Hans Christian Studt <hcstudt@post10.tele.dk> wrote:
> Guillaume POIRIER wrote:
>
> >Hi,
> >
> >On 9/5/05, Hans Christian Studt <hcstudt@post10.tele.dk> wrote:
> >
> >>I get the error below when trying to compile version 0.7.2 with kqemu.
> >>
> >>I need help to figure out what the problem may be.
> >>
> >>(/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2) $./configure
> >>Install prefix /usr/local
> >>BIOS directory /usr/local/share/qemu
> >>binary directory /usr/local/bin
> >>Manual directory /usr/local/share/man
> >>ELF interp prefix /usr/gnemul/qemu-%M
> >>Source path /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2
> >>C compiler gcc
> >>Host C compiler gcc
> >>make make
> >>host CPU i386
> >>host big endian no
> >>target list i386-user arm-user armeb-user sparc-user ppc-user i386-softmmu ppc-softmmu sparc-softmmu x86_64-softmmu mips-softmmu
> >>gprof enabled no
> >>static build no
> >>SDL support yes
> >>SDL static link yes
> >>mingw32 support no
> >>Adlib support no
> >>FMOD support no
> >>kqemu support yes
> >>
> >>KQEMU Linux module configuration:
> >>kernel sources /lib/modules/2.6.12-1.1398_FC4/build
> >>kbuild type 2.6
> >>søp 04 20:06:16 (hcs)@(tux1700/2.6.12-1.1398_FC4)on(pts/35):
> >>(/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2) $make
> >>:
> >>:
> >>:
> >>gcc -Wall -O2 -g -fno-strict-aliasing -fomit-frame-pointer -mpreferred-stack-boundary=2 -falign-functions=0 -fno-gcse -fno-reorder-blocks -fno-optimize-sibling-calls -I. -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386 -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2 -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/linux-user -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/linux-user/i386 -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/fpu -I/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/slirp -c -o op.o /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/op.c
> >>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h: In function â_pshufw_mmxâ
> >>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: error: unable to find a register to spill in class âNERAL_REGSâ
> >>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: error: this is the insn:
> >>(insn:HI 18 17 19 0 /user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:569 (set (strict_low_part (subreg:HI (reg/v:DI 63 [ r ]) 0))
> >> (mem/s/j:HI (plus:SI (mult:SI (reg:SI 64)
> >> (const_int 2 [0x2]))
> >> (reg/v/f:SI 59 [ s ])) [0 <variable>._w S2 A16])) 41 {*movstricthi_1} (insn_list:REG_DEP_TRUE 16 (insn_list:REG_DEP_TRUE 12 (insn_list:REG_DEP_TRUE 53 (nil))))
> >> (expr_list:REG_DEAD (reg:SI 64)
> >> (nil)))
> >>/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/target-i386/ops_sse.h:574: confused by earlier errors, bailing out
> >>make[1]: *** [op.o] Error 1
> >>make[1]: Leaving directory `/user2/tux1700-user/home/hcs/Download/Qemu/qemu-0.7.2/i386-user'
> >>make: *** [all] Error 1
> >>Mon Sep 05 08:41:16 (hcs)@(tux1700/2.6.12-1.1398_FC4)on(pts/35):
> >
> >
> >I don't see what version you're using. Please try with a different
> >version, which may do the trick.
> >
> >Guillaume
> I am using these versions
>
> -rw-rw-r-- 1 hcs 79314 Sep 4 19:31 kqemu-0.7.2.tar.gz
> -rw-rw-r-- 1 hcs 1341993 Sep 4 19:37 qemu-0.7.2.tar.gz
>
> $head Changelog
> version 0.7.2:
>
> - x86_64 fixes (Win2000 and Linux 2.6 boot in 32 bit)
> - merge self modifying code handling in dirty ram page mecanism.
>
> $head kqemu/Changelog
> version 0.7.2:
>
> - more precise segmentation support (aka Win98 support)
> - new API to track dirty RAM pages
>
> Linux is Fedora Core 4
> kernel 2.6.12-1.1398_FC4
>
> So which other versions should I try out ?
>
> Mvh Hans Christian Studt
> Mobile +45 29 23 54 14
> hc[AT]studt[DOT]dk http://hc.studt.dk
> Powered by Linux 2.6.12-1.1398_FC4
>
>
> _______________________________________________
> Qemu-devel mailing list
> Qemu-devel@nongnu.org
> http://lists.nongnu.org/mailman/listinfo/qemu-devel
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-09-05 10:06 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-09-05 6:51 [Qemu-devel] ops sse.h:574: error: unable to find a register to spill in class âGENERAL REGSâ Hans Christian Studt
2005-09-05 7:42 ` Guillaume POIRIER
-- strict thread matches above, loose matches on Subject: below --
2005-09-05 7:58 Hans Christian Studt
2005-09-05 9:20 ` Guillaume POIRIER
2005-09-05 9:52 ` Hetz Ben Hamo
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.