* [PATCH v6 1/3] Input: cyttsp - Cypress TTSP capacitive multi-touch screen support
@ 2011-10-15 18:37 martinez.javier
0 siblings, 0 replies; only message in thread
From: martinez.javier @ 2011-10-15 18:37 UTC (permalink / raw)
To: Henrik Rydberg
Cc: Dmitry Torokhov, Mohan Pallaka, Kevin McNeely, linux-input,
linux-kernel, Javier Martinez Canillas
From: Javier Martinez Canillas <martinez.javier@gmail.com>
Cypress TrueTouch(tm) Standard Product controllers are found in
a wide range of embedded devices. This driver add support for a
variety of TTSP controllers.
Since the hardware is capable of tracking identifiable contacts, multi-touch
protocol type B (stateful) is used to report contact information.
The driver is composed of a core driver that process the data sent by
the contacts and a set of bus specific interface modules. This patch
adds the base core TTSP driver.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
---
v2: Fix issues called out by Dmitry Torokhov
- Add msleep() delays between retries for read and write operations.
- Change cyttsp_core_init() to receive the IRQ from the client data
instead of obtaining from the platform_data.
v3: Fix issues called out by Henrik Rydberg and Mohan Pallaka
- Map each possible track id to a multitouch input slot.
- Remove bus type info since it is not used.
- Add retry logic to ttsp_write_block_data().
- ttsp_read_block_data() already msleep() remove the sleep in the caller.
- cyttsp_xy_worker() sounds as if it's a workqueue, change the function name.
- Check if handle is NULL in cyttsp_resume().
- Use platform data's use_sleep to decide to go deep sleep or low power mode.
- input_register_device() error path has to call input_free_device().
v4: Fix issues called out by Henrik Rydberg
- Remove unnecesary code and cleanup contact handler since input core is able
to detect duplicates.
v5: Fix issues called out by Henrik Rydberg
- Cleanup ttsp_[read | write]_block_data functions.
- Remove unused code to handle extended touch data.
- Simplify code in cyttsp_bl_app_data() and cyttsp_soft_reset().
v6: Fix issues called out by Henrik Rydberg
- Remove unneeded retval variables in load_bl_regs() and soft_reset().
- Delete debug paths in bl_app_valid() and exit_bl_mode().
- Simplify logic expressions in exit_bl_mode() and set_operational_mode().
- Check for tries >= CY_DELAY_MAX errors and report accordingly.
- Correct usage of bitwise operators.
drivers/input/touchscreen/Kconfig | 2 +
drivers/input/touchscreen/Makefile | 1 +
drivers/input/touchscreen/cyttsp/Kconfig | 36 ++
drivers/input/touchscreen/cyttsp/Makefile | 3 +
drivers/input/touchscreen/cyttsp/cyttsp_core.c | 769 ++++++++++++++++++++++++
drivers/input/touchscreen/cyttsp/cyttsp_core.h | 60 ++
include/linux/input/cyttsp.h | 71 +++
7 files changed, 942 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/touchscreen/cyttsp/Kconfig
create mode 100644 drivers/input/touchscreen/cyttsp/Makefile
create mode 100644 drivers/input/touchscreen/cyttsp/cyttsp_core.c
create mode 100644 drivers/input/touchscreen/cyttsp/cyttsp_core.h
create mode 100644 include/linux/input/cyttsp.h
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index cabd9e5..6933823 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -726,4 +726,6 @@ config TOUCHSCREEN_TPS6507X
To compile this driver as a module, choose M here: the
module will be called tps6507x_ts.
+source "drivers/input/touchscreen/cyttsp/Kconfig"
+
endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 282d6f7..945950a 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -60,3 +60,4 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp/
diff --git a/drivers/input/touchscreen/cyttsp/Kconfig b/drivers/input/touchscreen/cyttsp/Kconfig
new file mode 100644
index 0000000..c8bc322
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp/Kconfig
@@ -0,0 +1,36 @@
+config TOUCHSCREEN_CYTTSP_CORE
+ tristate "Cypress TTSP touchscreen core"
+ depends on INPUT_TOUCHSCREEN
+ help
+ Say Y here if you have a touchscreen interface using one
+ controller from the Cypress TrueTouch(tm) Standard Product
+ family.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp_core.
+
+config TOUCHSCREEN_CYTTSP_I2C
+ tristate "Cypress TTSP i2c touchscreen"
+ depends on I2C && TOUCHSCREEN_CYTTSP_CORE
+ help
+ Say Y here if you have a Cypress TTSP touchscreen
+ connected to your system with an I2C interface.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp_i2c.
+
+config TOUCHSCREEN_CYTTSP_SPI
+ tristate "Cypress TTSP spi touchscreen"
+ depends on SPI_MASTER && TOUCHSCREEN_CYTTSP_CORE
+ help
+ Say Y here if you have a Cypress TTSP touchscreen
+ connected to your with an SPI interface.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cyttsp_spi.
diff --git a/drivers/input/touchscreen/cyttsp/Makefile b/drivers/input/touchscreen/cyttsp/Makefile
new file mode 100644
index 0000000..687eeaa
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI) += cyttsp_spi.o
diff --git a/drivers/input/touchscreen/cyttsp/cyttsp_core.c b/drivers/input/touchscreen/cyttsp/cyttsp_core.c
new file mode 100644
index 0000000..103ac39
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp/cyttsp_core.c
@@ -0,0 +1,769 @@
+/*
+ * Core Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2011 Javier Martinez Canillas <martinez.javier@gmail.com>
+ *
+ * Multi-touch protocol type B support and cleanups by Javier Martinez Canillas
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+/* Bootloader number of command keys */
+#define CY_NUM_BL_KEYS 8
+
+/* helpers */
+#define GET_NUM_TOUCHES(x) ((x) & 0x0F)
+#define IS_LARGE_AREA(x) (((x) & 0x10) >> 4)
+#define IS_BAD_PKT(x) ((x) & 0x20)
+#define IS_VALID_APP(x) ((x) & 0x01)
+#define IS_OPERATIONAL_ERR(x) ((x) & 0x3F)
+#define GET_HSTMODE(reg) ((reg & 0x70) >> 4)
+#define GET_BOOTLOADERMODE(reg) ((reg & 0x10) >> 4)
+
+#define CY_REG_BASE 0x00
+#define CY_REG_ACT_DIST 0x1E
+#define CY_REG_ACT_INTRVL 0x1D
+#define CY_REG_TCH_TMOUT (CY_REG_ACT_INTRVL+1)
+#define CY_REG_LP_INTRVL (CY_REG_TCH_TMOUT+1)
+#define CY_MAXZ 255
+#define CY_DELAY_DFLT 20 /* ms */
+#define CY_DELAY_MAX (500/CY_DELAY_DFLT) /* half second */
+#define CY_ACT_DIST_DFLT 0xF8
+#define CY_HNDSHK_BIT 0x80
+/* device mode bits */
+#define CY_OPERATE_MODE 0x00
+#define CY_SYSINFO_MODE 0x10
+/* power mode select bits */
+#define CY_SOFT_RESET_MODE 0x01 /* return to Bootloader mode */
+#define CY_DEEP_SLEEP_MODE 0x02
+#define CY_LOW_POWER_MODE 0x04
+
+/* Slots management */
+#define CY_MAX_FINGER 4
+#define CY_MAX_ID 16
+
+struct cyttsp_tch {
+ __be16 x, y;
+ u8 z;
+} __packed;
+
+/* TrueTouch Standard Product Gen3 interface definition */
+struct cyttsp_xydata {
+ u8 hst_mode;
+ u8 tt_mode;
+ u8 tt_stat;
+ struct cyttsp_tch tch1;
+ u8 touch12_id;
+ struct cyttsp_tch tch2;
+ u8 gest_cnt;
+ u8 gest_id;
+ struct cyttsp_tch tch3;
+ u8 touch34_id;
+ struct cyttsp_tch tch4;
+ u8 tt_undef[3];
+ u8 act_dist;
+ u8 tt_reserved;
+} __packed;
+
+/* TTSP System Information interface definition */
+struct cyttsp_sysinfo_data {
+ u8 hst_mode;
+ u8 mfg_cmd;
+ u8 mfg_stat;
+ u8 cid[3];
+ u8 tt_undef1;
+ u8 uid[8];
+ u8 bl_verh;
+ u8 bl_verl;
+ u8 tts_verh;
+ u8 tts_verl;
+ u8 app_idh;
+ u8 app_idl;
+ u8 app_verh;
+ u8 app_verl;
+ u8 tt_undef[5];
+ u8 scn_typ;
+ u8 act_intrvl;
+ u8 tch_tmout;
+ u8 lp_intrvl;
+};
+
+/* TTSP Bootloader Register Map interface definition */
+#define CY_BL_CHKSUM_OK 0x01
+struct cyttsp_bootloader_data {
+ u8 bl_file;
+ u8 bl_status;
+ u8 bl_error;
+ u8 blver_hi;
+ u8 blver_lo;
+ u8 bld_blver_hi;
+ u8 bld_blver_lo;
+ u8 ttspver_hi;
+ u8 ttspver_lo;
+ u8 appid_hi;
+ u8 appid_lo;
+ u8 appver_hi;
+ u8 appver_lo;
+ u8 cid_0;
+ u8 cid_1;
+ u8 cid_2;
+};
+
+struct cyttsp {
+ struct device *dev;
+ int irq;
+ struct input_dev *input;
+ char phys[32];
+ const struct cyttsp_platform_data *platform_data;
+ struct cyttsp_bus_ops *bus_ops;
+ struct cyttsp_bootloader_data bl_data;
+ struct cyttsp_sysinfo_data sysinfo_data;
+ struct completion bl_ready;
+ enum cyttsp_powerstate power_state;
+};
+
+static const u8 bl_command[] = {
+ 0x00, /* file offset */
+ 0xFF, /* command */
+ 0xA5, /* exit bootloader command */
+ 0, 1, 2, 3, 4, 5, 6, 7 /* default keys */
+};
+
+static int ttsp_read_block_data(struct cyttsp *ts, u8 command,
+ u8 length, void *buf)
+{
+ int retval = -1;
+ int tries;
+
+ if (!buf || !length)
+ return -EINVAL;
+
+ for (tries = 0; tries < CY_NUM_RETRY && (retval < 0); tries++) {
+ retval = ts->bus_ops->read(ts->bus_ops, command, length, buf);
+ if (retval)
+ msleep(CY_DELAY_DFLT);
+ }
+
+ return retval;
+}
+
+static int ttsp_write_block_data(struct cyttsp *ts, u8 command,
+ u8 length, void *buf)
+{
+ int retval = -1;
+ int tries;
+
+ if (!buf || !length)
+ return -EINVAL;
+
+ for (tries = 0; tries < CY_NUM_RETRY && (retval < 0); tries++) {
+ retval = ts->bus_ops->write(ts->bus_ops, command, length, buf);
+ if (retval)
+ msleep(CY_DELAY_DFLT);
+ }
+
+ return retval;
+}
+
+static int cyttsp_load_bl_regs(struct cyttsp *ts)
+{
+ memset(&(ts->bl_data), 0, sizeof(struct cyttsp_bootloader_data));
+
+ ts->bl_data.bl_status = 0x10;
+
+ return ttsp_read_block_data(ts, CY_REG_BASE, sizeof(ts->bl_data),
+ &ts->bl_data);
+}
+
+static int cyttsp_bl_app_valid(struct cyttsp *ts)
+{
+ int retval;
+
+ retval = cyttsp_load_bl_regs(ts);
+
+ if (retval < 0) {
+ retval = -ENODEV;
+ goto done;
+ }
+
+ if (GET_BOOTLOADERMODE(ts->bl_data.bl_status)) {
+ if (IS_VALID_APP(ts->bl_data.bl_status))
+ return 0;
+ else
+ return -ENODEV;
+ }
+
+ if (GET_HSTMODE(ts->bl_data.bl_file) == CY_OPERATE_MODE) {
+ if (!(IS_OPERATIONAL_ERR(ts->bl_data.bl_status)))
+ return 1;
+ else
+ return -ENODEV;
+ }
+
+ retval = -ENODEV;
+done:
+ return retval;
+}
+
+static int cyttsp_exit_bl_mode(struct cyttsp *ts)
+{
+ int retval;
+ int tries;
+ u8 bl_cmd[sizeof(bl_command)];
+
+ memcpy(bl_cmd, bl_command, sizeof(bl_command));
+ if (ts->platform_data->bl_keys)
+ memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS],
+ ts->platform_data->bl_keys, sizeof(bl_command));
+
+ retval = ttsp_write_block_data(ts, CY_REG_BASE,
+ sizeof(bl_cmd), (void *)bl_cmd);
+
+ if (retval < 0)
+ return retval;
+
+ /* wait for TTSP Device to complete switch to Operational mode */
+ tries = 0;
+ do {
+ msleep(CY_DELAY_DFLT);
+ retval = cyttsp_load_bl_regs(ts);
+ } while ((retval || GET_BOOTLOADERMODE(ts->bl_data.bl_status)) &&
+ (tries++ < CY_DELAY_MAX));
+
+ if (tries >= CY_DELAY_MAX)
+ return -ENODEV;
+
+ return retval;
+}
+
+static int cyttsp_set_operational_mode(struct cyttsp *ts)
+{
+ struct cyttsp_xydata xy_data;
+ int retval;
+ int tries = 0;
+ u8 cmd = CY_OPERATE_MODE;
+
+ retval = ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd);
+
+ if (retval < 0)
+ return retval;
+
+ /* wait for TTSP Device to complete switch to Operational mode */
+ do {
+ retval = ttsp_read_block_data(ts, CY_REG_BASE,
+ sizeof(xy_data), &(xy_data));
+ } while ((retval || xy_data.act_dist != CY_ACT_DIST_DFLT) &&
+ (tries++ < CY_DELAY_MAX));
+
+ if (tries >= CY_DELAY_MAX)
+ return -EAGAIN;
+
+ return retval;
+}
+
+static int cyttsp_set_sysinfo_mode(struct cyttsp *ts)
+{
+ int retval;
+ int tries;
+ u8 cmd = CY_SYSINFO_MODE;
+
+ memset(&(ts->sysinfo_data), 0, sizeof(struct cyttsp_sysinfo_data));
+
+ /* switch to sysinfo mode */
+ retval = ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd);
+ if (retval < 0)
+ return retval;
+
+ /* read sysinfo registers */
+ tries = 0;
+ do {
+ msleep(CY_DELAY_DFLT);
+ retval = ttsp_read_block_data(ts, CY_REG_BASE,
+ sizeof(ts->sysinfo_data), &ts->sysinfo_data);
+ } while ((retval || (!ts->sysinfo_data.tts_verh &&
+ !ts->sysinfo_data.tts_verl)) &&
+ (tries++ < CY_DELAY_MAX));
+
+ if (tries >= CY_DELAY_MAX)
+ return -EAGAIN;
+
+ return retval;
+}
+
+static int cyttsp_set_sysinfo_regs(struct cyttsp *ts)
+{
+ int retval = 0;
+
+ if (ts->platform_data->act_intrvl != CY_ACT_INTRVL_DFLT ||
+ ts->platform_data->tch_tmout != CY_TCH_TMOUT_DFLT ||
+ ts->platform_data->lp_intrvl != CY_LP_INTRVL_DFLT) {
+
+ u8 intrvl_ray[3];
+
+ intrvl_ray[0] = ts->platform_data->act_intrvl;
+ intrvl_ray[1] = ts->platform_data->tch_tmout;
+ intrvl_ray[2] = ts->platform_data->lp_intrvl;
+
+ /* set intrvl registers */
+ retval = ttsp_write_block_data(ts,
+ CY_REG_ACT_INTRVL,
+ sizeof(intrvl_ray), intrvl_ray);
+
+ msleep(CY_DELAY_DFLT);
+ }
+
+ return retval;
+}
+
+static int cyttsp_soft_reset(struct cyttsp *ts)
+{
+ int retval;
+ u8 cmd = CY_SOFT_RESET_MODE;
+ long wait_jiffies = msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX);
+ /* wait for interrupt to set ready completion */
+ INIT_COMPLETION(ts->bl_ready);
+
+ retval = ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd);
+ if (retval < 0)
+ return retval;
+
+ return wait_for_completion_timeout(&ts->bl_ready, wait_jiffies);
+}
+
+static int cyttsp_act_dist_setup(struct cyttsp *ts)
+{
+ int retval;
+ u8 act_dist_setup;
+
+ /* Init gesture; active distance setup */
+ act_dist_setup = ts->platform_data->act_dist;
+ retval = ttsp_write_block_data(ts, CY_REG_ACT_DIST,
+ sizeof(act_dist_setup), &act_dist_setup);
+
+ return retval;
+}
+
+static int cyttsp_hndshk(struct cyttsp *ts, u8 hst_mode)
+{
+ u8 cmd;
+
+ cmd = hst_mode ^ CY_HNDSHK_BIT;
+
+ return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), (u8 *)&cmd);
+}
+
+static void cyttsp_report_slot(struct input_dev *dev, int slot,
+ int x, int y, int z)
+{
+ input_mt_slot(dev, slot);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, true);
+ input_report_abs(dev, ABS_MT_POSITION_X, x);
+ input_report_abs(dev, ABS_MT_POSITION_Y, y);
+ input_report_abs(dev, ABS_MT_TOUCH_MAJOR, z);
+}
+
+static void cyttsp_report_slot_empty(struct input_dev *dev, int slot)
+{
+ input_mt_slot(dev, slot);
+ input_mt_report_slot_state(dev, MT_TOOL_FINGER, false);
+}
+
+static void cyttsp_extract_track_ids(struct cyttsp_xydata *xy_data, int *ids)
+{
+ ids[0] = xy_data->touch12_id >> 4;
+ ids[1] = xy_data->touch12_id & 0xF;
+ ids[2] = xy_data->touch34_id >> 4;
+ ids[3] = xy_data->touch34_id & 0xF;
+}
+
+static const struct cyttsp_tch *cyttsp_get_tch(struct cyttsp_xydata *xy_data,
+ int idx)
+{
+ switch (idx) {
+ case 0:
+ return &xy_data->tch1;
+ case 1:
+ return &xy_data->tch2;
+ case 2:
+ return &xy_data->tch3;
+ case 3:
+ return &xy_data->tch4;
+ default:
+ return NULL;
+ }
+}
+
+static int cyttsp_handle_tchdata(struct cyttsp *ts)
+{
+ struct cyttsp_xydata xy_data;
+ u8 num_cur_tch;
+ int i;
+ int ids[4];
+ const struct cyttsp_tch *tch = NULL;
+ int x, y, z;
+ int used = 0;
+
+ /* Get touch data from CYTTSP device */
+ if (ttsp_read_block_data(ts,
+ CY_REG_BASE, sizeof(struct cyttsp_xydata), &xy_data))
+ return 0;
+
+ /* provide flow control handshake */
+ if (ts->platform_data->use_hndshk)
+ if (cyttsp_hndshk(ts, xy_data.hst_mode))
+ return 0;
+
+ /* determine number of currently active touches */
+ num_cur_tch = GET_NUM_TOUCHES(xy_data.tt_stat);
+
+ /* check for any error conditions */
+ if (ts->power_state == CY_IDLE_STATE)
+ return 0;
+ else if (GET_BOOTLOADERMODE(xy_data.tt_mode)) {
+ return -1;
+ } else if (IS_LARGE_AREA(xy_data.tt_stat) == 1) {
+ /* terminate all active tracks */
+ num_cur_tch = 0;
+ dev_dbg(ts->dev, "%s: Large area detected\n", __func__);
+ } else if (num_cur_tch > CY_MAX_FINGER) {
+ /* terminate all active tracks */
+ num_cur_tch = 0;
+ dev_dbg(ts->dev, "%s: Num touch error detected\n", __func__);
+ } else if (IS_BAD_PKT(xy_data.tt_mode)) {
+ /* terminate all active tracks */
+ num_cur_tch = 0;
+ dev_dbg(ts->dev, "%s: Invalid buffer detected\n", __func__);
+ }
+
+ cyttsp_extract_track_ids(&xy_data, ids);
+
+ for (i = 0; i < num_cur_tch; i++) {
+ used |= (1 << ids[i]);
+
+ tch = cyttsp_get_tch(&xy_data, i);
+
+ x = be16_to_cpu(tch->x);
+ y = be16_to_cpu(tch->y);
+ z = tch->z;
+
+ cyttsp_report_slot(ts->input, ids[i], x, y, z);
+ }
+
+ for (i = 0; i < CY_MAX_ID; i++)
+ if (!(used & (1 << i)))
+ cyttsp_report_slot_empty(ts->input, i);
+
+ input_sync(ts->input);
+
+ return 0;
+}
+
+static void cyttsp_pr_state(struct cyttsp *ts)
+{
+ static char *cyttsp_powerstate_string[] = {
+ "IDLE",
+ "ACTIVE",
+ "LOW_PWR",
+ "SLEEP",
+ "BOOTLOADER",
+ "INVALID"
+ };
+
+ dev_info(ts->dev, "%s: %s\n", __func__,
+ ts->power_state < CY_INVALID_STATE ?
+ cyttsp_powerstate_string[ts->power_state] :
+ "INVALID");
+}
+
+static irqreturn_t cyttsp_irq(int irq, void *handle)
+{
+ struct cyttsp *ts = handle;
+ int retval;
+
+ if (ts->power_state == CY_BL_STATE)
+ complete(&ts->bl_ready);
+ else {
+ /* process the touches */
+ retval = cyttsp_handle_tchdata(ts);
+
+ if (retval < 0) {
+ /*
+ * TTSP device has reset back to bootloader mode.
+ * Restore to operational mode.
+ */
+ retval = cyttsp_exit_bl_mode(ts);
+ if (retval)
+ ts->power_state = CY_IDLE_STATE;
+ else
+ ts->power_state = CY_ACTIVE_STATE;
+ cyttsp_pr_state(ts);
+ }
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int cyttsp_power_on(struct cyttsp *ts)
+{
+ int retval = 0;
+
+ if (!ts)
+ return -ENOMEM;
+
+ ts->power_state = CY_BL_STATE;
+
+ /* enable interrupts */
+ retval = request_threaded_irq(ts->irq, NULL, cyttsp_irq,
+ IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+ ts->platform_data->name, ts);
+ if (retval < 0)
+ goto bypass;
+
+ retval = cyttsp_soft_reset(ts);
+ if (retval == 0)
+ goto bypass;
+
+ retval = cyttsp_bl_app_valid(ts);
+ if (retval < 0)
+ goto bypass;
+ else if (retval > 0)
+ goto no_bl_bypass;
+
+ retval = cyttsp_exit_bl_mode(ts);
+
+ if (retval < 0)
+ goto bypass;
+
+ ts->power_state = CY_IDLE_STATE;
+
+no_bl_bypass:
+ retval = cyttsp_set_sysinfo_mode(ts);
+ if (retval < 0)
+ goto bypass;
+
+ retval = cyttsp_set_sysinfo_regs(ts);
+ if (retval < 0)
+ goto bypass;
+
+ retval = cyttsp_set_operational_mode(ts);
+ if (retval < 0)
+ goto bypass;
+
+ /* init active distance */
+ retval = cyttsp_act_dist_setup(ts);
+ if (retval < 0)
+ goto bypass;
+
+ ts->power_state = CY_ACTIVE_STATE;
+ retval = 0;
+
+bypass:
+ cyttsp_pr_state(ts);
+ return retval;
+}
+
+#ifdef CONFIG_PM
+int cyttsp_resume(void *handle)
+{
+ struct cyttsp *ts = handle;
+ int retval = 0;
+ struct cyttsp_xydata xydata;
+
+ if (!ts)
+ return retval;
+
+ if (ts->platform_data->use_sleep && (ts->power_state !=
+ CY_ACTIVE_STATE)) {
+
+ if (ts->platform_data->wakeup)
+ retval = ts->platform_data->wakeup();
+ else
+ retval = -ENOSYS;
+
+ if (retval >= 0) {
+ retval = ttsp_read_block_data(ts, CY_REG_BASE,
+ sizeof(xydata),
+ &xydata);
+ if (retval >= 0 &&
+ !GET_HSTMODE(xydata.hst_mode))
+ ts->power_state = CY_ACTIVE_STATE;
+ }
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(cyttsp_resume);
+
+int cyttsp_suspend(void *handle)
+{
+ struct cyttsp *ts = handle;
+ u8 sleep_mode = 0;
+ int retval = 0;
+
+ if (ts->platform_data->use_sleep &&
+ (ts->power_state == CY_ACTIVE_STATE)) {
+ sleep_mode = ts->platform_data->use_sleep;
+ retval = ttsp_write_block_data(ts,
+ CY_REG_BASE, sizeof(sleep_mode), &sleep_mode);
+ if (retval >= 0)
+ ts->power_state = CY_SLEEP_STATE;
+ }
+
+ return retval;
+}
+EXPORT_SYMBOL_GPL(cyttsp_suspend);
+#endif
+
+static int cyttsp_open(struct input_dev *dev)
+{
+ struct cyttsp *ts = input_get_drvdata(dev);
+
+ return cyttsp_power_on(ts);
+}
+
+void cyttsp_core_release(void *handle)
+{
+ struct cyttsp *ts = handle;
+
+ if (ts) {
+ free_irq(ts->irq, ts);
+ input_unregister_device(ts->input);
+ if (ts->platform_data->exit)
+ ts->platform_data->exit();
+ input_mt_destroy_slots(ts->input);
+ kfree(ts);
+ }
+}
+EXPORT_SYMBOL_GPL(cyttsp_core_release);
+
+static void cyttsp_close(struct input_dev *dev)
+{
+ struct cyttsp *ts = input_get_drvdata(dev);
+
+ free_irq(ts->irq, ts);
+}
+
+void *cyttsp_core_init(struct cyttsp_bus_ops *bus_ops,
+ struct device *dev, int irq)
+{
+ struct input_dev *input_device;
+ int ret;
+
+ struct cyttsp *ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+
+ if (!ts) {
+ pr_err("%s: Error, kzalloc\n", __func__);
+ goto error_alloc_data;
+ }
+
+ if (dev == NULL || bus_ops == NULL) {
+ kfree(ts);
+ goto error_alloc_data;
+ }
+
+ ts->dev = dev;
+ ts->platform_data = dev->platform_data;
+ ts->bus_ops = bus_ops;
+ init_completion(&ts->bl_ready);
+
+ if (ts->platform_data->init) {
+ if (ts->platform_data->init()) {
+ dev_dbg(ts->dev, "%s: Error, platform init failed!\n",
+ __func__);
+ goto error_init;
+ }
+ }
+
+ ts->irq = irq;
+ if (ts->irq <= 0) {
+ dev_dbg(ts->dev, "%s: Error, failed to allocate irq\n",
+ __func__);
+ goto error_init;
+ }
+
+ /* Create the input device and register it. */
+ input_device = input_allocate_device();
+ if (!input_device) {
+ dev_dbg(ts->dev, "%s: Error, failed to allocate input device\n",
+ __func__);
+ goto error_input_allocate_device;
+ }
+
+ ts->input = input_device;
+ input_device->name = ts->platform_data->name;
+ snprintf(ts->phys, sizeof(ts->phys), "%s", dev_name(dev));
+ input_device->phys = ts->phys;
+ input_device->dev.parent = ts->dev;
+ input_device->open = cyttsp_open;
+ input_device->close = cyttsp_close;
+ input_set_drvdata(input_device, ts);
+
+ __set_bit(EV_SYN, input_device->evbit);
+ __set_bit(EV_KEY, input_device->evbit);
+ __set_bit(EV_ABS, input_device->evbit);
+
+ input_set_abs_params(input_device, ABS_MT_POSITION_X,
+ 0, ts->platform_data->maxx, 0, 0);
+ input_set_abs_params(input_device, ABS_MT_POSITION_Y,
+ 0, ts->platform_data->maxy, 0, 0);
+ input_set_abs_params(input_device, ABS_MT_TOUCH_MAJOR,
+ 0, CY_MAXZ, 0, 0);
+
+ input_mt_init_slots(input_device, CY_MAX_ID);
+
+ ret = input_register_device(input_device);
+ if (ret) {
+ dev_err(ts->dev, "%s: Error, failed to register input device: %d\n",
+ __func__, ret);
+ goto error_input_register_device;
+ }
+
+ goto no_error;
+
+error_input_register_device:
+ input_free_device(input_device);
+error_input_allocate_device:
+ if (ts->platform_data->exit)
+ ts->platform_data->exit();
+error_init:
+ kfree(ts);
+error_alloc_data:
+no_error:
+ return ts;
+}
+EXPORT_SYMBOL_GPL(cyttsp_core_init);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver core");
+MODULE_AUTHOR("Cypress");
+
diff --git a/drivers/input/touchscreen/cyttsp/cyttsp_core.h b/drivers/input/touchscreen/cyttsp/cyttsp_core.h
new file mode 100644
index 0000000..efefdb9
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp/cyttsp_core.h
@@ -0,0 +1,60 @@
+/*
+ * Header file for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2011 Javier Martinez Canillas <martinez.javier@gmail.com>
+ *
+ * Multi-touch protocol type B support and cleanups by Javier Martinez Canillas
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+
+#ifndef __CYTTSP_CORE_H__
+#define __CYTTSP_CORE_H__
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/input/cyttsp.h>
+
+#define CY_NUM_RETRY 4 /* max number of retries for read ops */
+
+
+struct cyttsp_bus_ops {
+ s32 (*write)(void *handle, u8 addr, u8 length, const void *values);
+ s32 (*read)(void *handle, u8 addr, u8 length, void *values);
+ s32 (*ext)(void *handle, void *values);
+ struct device *dev;
+};
+
+void *cyttsp_core_init(struct cyttsp_bus_ops *bus_ops,
+ struct device *dev, int irq);
+
+void cyttsp_core_release(void *handle);
+#ifdef CONFIG_PM
+int cyttsp_resume(void *handle);
+int cyttsp_suspend(void *handle);
+#endif
+
+#endif /* __CYTTSP_CORE_H__ */
diff --git a/include/linux/input/cyttsp.h b/include/linux/input/cyttsp.h
new file mode 100644
index 0000000..324344e
--- /dev/null
+++ b/include/linux/input/cyttsp.h
@@ -0,0 +1,71 @@
+/*
+ * Header file for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2011 Javier Martinez Canillas <martinez.javier@gmail.com>
+ *
+ * Multi-touch protocol type B support and cleanups by Javier Martinez Canillas
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com (kev@cypress.com)
+ *
+ */
+#ifndef _CYTTSP_H_
+#define _CYTTSP_H_
+
+#define CY_SPI_NAME "cyttsp-spi"
+#define CY_I2C_NAME "cyttsp-i2c"
+/* Active Power state scanning/processing refresh interval */
+#define CY_ACT_INTRVL_DFLT 0x00 /* ms */
+/* touch timeout for the Active power */
+#define CY_TCH_TMOUT_DFLT 0xFF /* ms */
+/* Low Power state scanning/processing refresh interval */
+#define CY_LP_INTRVL_DFLT 0x0A /* ms */
+/* Active distance in pixels for a gesture to be reported */
+#define CY_ACT_DIST_DFLT 0xF8 /* pixels */
+
+enum cyttsp_powerstate {
+ CY_IDLE_STATE,
+ CY_ACTIVE_STATE,
+ CY_LOW_PWR_STATE,
+ CY_SLEEP_STATE,
+ CY_BL_STATE,
+ CY_INVALID_STATE /* always last in the list */
+};
+
+struct cyttsp_platform_data {
+ u32 maxx;
+ u32 maxy;
+ bool use_hndshk;
+ bool use_sleep;
+ u8 act_dist; /* Active distance */
+ u8 act_intrvl; /* Active refresh interval; ms */
+ u8 tch_tmout; /* Active touch timeout; ms */
+ u8 lp_intrvl; /* Low power refresh interval; ms */
+ int (*wakeup)(void);
+ int (*init)(void);
+ void (*exit)(void);
+ char *name;
+ s16 irq_gpio;
+ u8 *bl_keys;
+};
+
+#endif /* _CYTTSP_H_ */
--
1.7.4.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2011-10-15 18:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-15 18:37 [PATCH v6 1/3] Input: cyttsp - Cypress TTSP capacitive multi-touch screen support martinez.javier
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.