From: Josua Mayer <josua@solid-run.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol@kernel.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Peter Rosin <peda@axentia.se>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Andreas Kemnade <andreas@kemnade.info>,
Kevin Hilman <khilman@baylibre.com>,
Roger Quadros <rogerq@kernel.org>,
Tony Lindgren <tony@atomide.com>, Vignesh R <vigneshr@ti.com>,
Janusz Krzysztofik <jmkrzyszt@gmail.com>,
Andi Shyti <andi.shyti@kernel.org>,
Mikhail Anikin <mikhail.anikin@solid-run.com>,
Yazan Shhady <yazan.shhady@solid-run.com>,
Jon Nettleton <jon@solid-run.com>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-renesas-soc@vger.kernel.org"
<linux-renesas-soc@vger.kernel.org>,
"linux-can@vger.kernel.org" <linux-can@vger.kernel.org>,
"linux-phy@lists.infradead.org" <linux-phy@lists.infradead.org>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
"linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>
Subject: Re: [PATCH v3 0/6] mmc: host: renesas_sdhi_core: support configuring an optional sdio mux
Date: Sun, 21 Dec 2025 10:45:25 +0000 [thread overview]
Message-ID: <4f8606fd-2233-4de8-82e6-672ec597a635@solid-run.com> (raw)
In-Reply-To: <CAPDyKFr7DCRs_E4VfrY9-NY8-bStT9oAZaYhUZDg_y3KEW9DWQ@mail.gmail.com>
Am 17.12.25 um 14:42 schrieb Ulf Hansson:
> On Wed, 10 Dec 2025 at 18:39, Josua Mayer <josua@solid-run.com> wrote:
>> Some Renesas SoC based boards mux SD and eMMC on a single sdio
>> controller, exposing user control by dip switch and software control by
>> gpio.
>>
>> Purpose is to simplify development and provisioning by selecting boot
>> media at power-on, and again before starting linux.
>>
>> Add binding and driver support for linking a (gpio) mux to renesas sdio
>> controller.
>>
>> Introduce generic helper functions for getting managed and selected
>> mux-state objects, and switch i2c-omap and phy-can-transceiver drivers.
>>
>> Signed-off-by: Josua Mayer <josua@solid-run.com>
>> ---
>> Changes in v3:
>> - updated omap-i2c and phy-can-transceiver to use new helpers.
>> - created generic helper functions for getting managed optional mux-state.
>> (Reported-by: Rob Herring <robh@kernel.org>)
>> - picked up binding ack by Rob Herring.
>> - replaced use of "SDIO" with "SD/SDIO/eMMC" in binding document and
>> commit descriptions.
>> (Reported-by: Ulf Hansson <ulf.hansson@linaro.org>)
>> - Link to v2: https://lore.kernel.org/r/20251201-rz-sdio-mux-v2-0-bcb581b88dd7@solid-run.com
>>
>> Changes in v2:
>> - dropped mux-controller node from dt binding example
>> (Reported-by: Conor Dooley <conor@kernel.org>
>> Reported-by: Krzysztof Kozlowski <krzk@kernel.org>)
>> - Link to v1: https://lore.kernel.org/r/20251128-rz-sdio-mux-v1-0-1ede318d160f@solid-run.com
>>
>> ---
>> Josua Mayer (6):
>> phy: can-transceiver: rename temporary helper function to avoid conflict
>> mux: Add helper functions for getting optional and selected mux-state
>> phy: can-transceiver: drop temporary helper getting optional mux-state
>> i2c: omap: switch to new generic helper for getting selected mux-state
>> dt-bindings: mmc: renesas,sdhi: Add mux-states property
>> mmc: host: renesas_sdhi_core: support selecting an optional mux
>>
>> .../devicetree/bindings/mmc/renesas,sdhi.yaml | 6 ++
>> drivers/i2c/busses/i2c-omap.c | 19 ++----
>> drivers/mmc/host/Kconfig | 1 +
>> drivers/mmc/host/renesas_sdhi.h | 1 +
>> drivers/mmc/host/renesas_sdhi_core.c | 16 +++++-
>> drivers/mux/core.c | 67 +++++++++++++++++++---
>> drivers/phy/phy-can-transceiver.c | 10 ----
>> include/linux/mux/consumer.h | 4 ++
>> 8 files changed, 89 insertions(+), 35 deletions(-)
>> ---
>> base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787
>> change-id: 20251128-rz-sdio-mux-acc5137f1618
>>
>> Best regards,
>> --
>> Josua Mayer <josua@solid-run.com>
> Looks like this needs to go together or if someone can host the common
> parts via an immutable branch.
Yes. Patch 1 is critical and must be applied before 2. Patches 3-5 require 2.
>
> Anyway, I am expecting some discussion or update for patch2 first.
>
> Kind regards
> Uffe
>
WARNING: multiple messages have this Message-ID (diff)
From: Josua Mayer <josua@solid-run.com>
To: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Geert Uytterhoeven <geert+renesas@glider.be>,
Magnus Damm <magnus.damm@gmail.com>,
Wolfram Sang <wsa+renesas@sang-engineering.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Vincent Mailhol <mailhol@kernel.org>,
Vinod Koul <vkoul@kernel.org>,
Kishon Vijay Abraham I <kishon@kernel.org>,
Peter Rosin <peda@axentia.se>,
Aaro Koskinen <aaro.koskinen@iki.fi>,
Andreas Kemnade <andreas@kemnade.info>,
Kevin Hilman <khilman@baylibre.com>,
Roger Quadros <rogerq@kernel.org>,
Tony Lindgren <tony@atomide.com>, Vignesh R <vigneshr@ti.com>,
Janusz Krzysztofik <jmkrzyszt@gmail.com>,
Andi Shyti <andi.shyti@kernel.org>,
Mikhail Anikin <mikhail.anikin@solid-run.com>,
Yazan Shhady <yazan.shhady@solid-run.com>,
Jon Nettleton <jon@solid-run.com>,
"linux-mmc@vger.kernel.org" <linux-mmc@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
"linux-renesas-soc@vger.kernel.org"
<linux-renesas-soc@vger.kernel.org>,
"linux-can@vger.kernel.org" <linux-can@vger.kernel.org>,
"linux-phy@lists.infradead.org" <linux-phy@lists.infradead.org>,
"linux-omap@vger.kernel.org" <linux-omap@vger.kernel.org>,
"linux-i2c@vger.kernel.org" <linux-i2c@vger.kernel.org>
Subject: Re: [PATCH v3 0/6] mmc: host: renesas_sdhi_core: support configuring an optional sdio mux
Date: Sun, 21 Dec 2025 10:45:25 +0000 [thread overview]
Message-ID: <4f8606fd-2233-4de8-82e6-672ec597a635@solid-run.com> (raw)
In-Reply-To: <CAPDyKFr7DCRs_E4VfrY9-NY8-bStT9oAZaYhUZDg_y3KEW9DWQ@mail.gmail.com>
Am 17.12.25 um 14:42 schrieb Ulf Hansson:
> On Wed, 10 Dec 2025 at 18:39, Josua Mayer <josua@solid-run.com> wrote:
>> Some Renesas SoC based boards mux SD and eMMC on a single sdio
>> controller, exposing user control by dip switch and software control by
>> gpio.
>>
>> Purpose is to simplify development and provisioning by selecting boot
>> media at power-on, and again before starting linux.
>>
>> Add binding and driver support for linking a (gpio) mux to renesas sdio
>> controller.
>>
>> Introduce generic helper functions for getting managed and selected
>> mux-state objects, and switch i2c-omap and phy-can-transceiver drivers.
>>
>> Signed-off-by: Josua Mayer <josua@solid-run.com>
>> ---
>> Changes in v3:
>> - updated omap-i2c and phy-can-transceiver to use new helpers.
>> - created generic helper functions for getting managed optional mux-state.
>> (Reported-by: Rob Herring <robh@kernel.org>)
>> - picked up binding ack by Rob Herring.
>> - replaced use of "SDIO" with "SD/SDIO/eMMC" in binding document and
>> commit descriptions.
>> (Reported-by: Ulf Hansson <ulf.hansson@linaro.org>)
>> - Link to v2: https://lore.kernel.org/r/20251201-rz-sdio-mux-v2-0-bcb581b88dd7@solid-run.com
>>
>> Changes in v2:
>> - dropped mux-controller node from dt binding example
>> (Reported-by: Conor Dooley <conor@kernel.org>
>> Reported-by: Krzysztof Kozlowski <krzk@kernel.org>)
>> - Link to v1: https://lore.kernel.org/r/20251128-rz-sdio-mux-v1-0-1ede318d160f@solid-run.com
>>
>> ---
>> Josua Mayer (6):
>> phy: can-transceiver: rename temporary helper function to avoid conflict
>> mux: Add helper functions for getting optional and selected mux-state
>> phy: can-transceiver: drop temporary helper getting optional mux-state
>> i2c: omap: switch to new generic helper for getting selected mux-state
>> dt-bindings: mmc: renesas,sdhi: Add mux-states property
>> mmc: host: renesas_sdhi_core: support selecting an optional mux
>>
>> .../devicetree/bindings/mmc/renesas,sdhi.yaml | 6 ++
>> drivers/i2c/busses/i2c-omap.c | 19 ++----
>> drivers/mmc/host/Kconfig | 1 +
>> drivers/mmc/host/renesas_sdhi.h | 1 +
>> drivers/mmc/host/renesas_sdhi_core.c | 16 +++++-
>> drivers/mux/core.c | 67 +++++++++++++++++++---
>> drivers/phy/phy-can-transceiver.c | 10 ----
>> include/linux/mux/consumer.h | 4 ++
>> 8 files changed, 89 insertions(+), 35 deletions(-)
>> ---
>> base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787
>> change-id: 20251128-rz-sdio-mux-acc5137f1618
>>
>> Best regards,
>> --
>> Josua Mayer <josua@solid-run.com>
> Looks like this needs to go together or if someone can host the common
> parts via an immutable branch.
Yes. Patch 1 is critical and must be applied before 2. Patches 3-5 require 2.
>
> Anyway, I am expecting some discussion or update for patch2 first.
>
> Kind regards
> Uffe
>
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
next prev parent reply other threads:[~2025-12-21 10:45 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-12-10 17:38 [PATCH v3 0/6] mmc: host: renesas_sdhi_core: support configuring an optional sdio mux Josua Mayer
2025-12-10 17:38 ` Josua Mayer
2025-12-10 17:38 ` [PATCH v3 1/6] phy: can-transceiver: rename temporary helper function to avoid conflict Josua Mayer
2025-12-10 17:38 ` Josua Mayer
2025-12-22 10:59 ` Geert Uytterhoeven
2025-12-22 10:59 ` Geert Uytterhoeven
2025-12-23 14:08 ` Vinod Koul
2025-12-23 14:08 ` Vinod Koul
2025-12-10 17:38 ` [PATCH v3 2/6] mux: Add helper functions for getting optional and selected mux-state Josua Mayer
2025-12-10 17:38 ` Josua Mayer
2025-12-17 13:38 ` Ulf Hansson
2025-12-17 13:38 ` Ulf Hansson
2025-12-21 10:37 ` Josua Mayer
2025-12-21 10:37 ` Josua Mayer
2025-12-22 14:47 ` Ulf Hansson
2025-12-22 14:47 ` Ulf Hansson
2025-12-29 11:30 ` Josua Mayer
2025-12-29 11:30 ` Josua Mayer
2025-12-29 14:46 ` Ulf Hansson
2025-12-29 14:46 ` Ulf Hansson
2025-12-22 10:08 ` Geert Uytterhoeven
2025-12-22 10:08 ` Geert Uytterhoeven
2025-12-29 12:01 ` Josua Mayer
2025-12-29 12:01 ` Josua Mayer
2025-12-29 12:07 ` Josua Mayer
2025-12-29 12:07 ` Josua Mayer
2025-12-10 17:38 ` [PATCH v3 3/6] phy: can-transceiver: drop temporary helper getting optional mux-state Josua Mayer
2025-12-10 17:38 ` Josua Mayer
2025-12-22 11:00 ` Geert Uytterhoeven
2025-12-22 11:00 ` Geert Uytterhoeven
2025-12-23 14:08 ` Vinod Koul
2025-12-23 14:08 ` Vinod Koul
2025-12-10 17:38 ` [PATCH v3 4/6] i2c: omap: switch to new generic helper for getting selected mux-state Josua Mayer
2025-12-10 17:38 ` Josua Mayer
2025-12-23 17:11 ` Andreas Kemnade
2025-12-23 17:11 ` Andreas Kemnade
2025-12-10 17:38 ` [PATCH v3 5/6] dt-bindings: mmc: renesas,sdhi: Add mux-states property Josua Mayer
2025-12-10 17:38 ` Josua Mayer
2025-12-10 17:38 ` [PATCH v3 6/6] mmc: host: renesas_sdhi_core: support selecting an optional mux Josua Mayer
2025-12-10 17:38 ` Josua Mayer
2025-12-17 13:42 ` [PATCH v3 0/6] mmc: host: renesas_sdhi_core: support configuring an optional sdio mux Ulf Hansson
2025-12-17 13:42 ` Ulf Hansson
2025-12-21 10:45 ` Josua Mayer [this message]
2025-12-21 10:45 ` Josua Mayer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4f8606fd-2233-4de8-82e6-672ec597a635@solid-run.com \
--to=josua@solid-run.com \
--cc=aaro.koskinen@iki.fi \
--cc=andi.shyti@kernel.org \
--cc=andreas@kemnade.info \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=jmkrzyszt@gmail.com \
--cc=jon@solid-run.com \
--cc=khilman@baylibre.com \
--cc=kishon@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-i2c@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=mailhol@kernel.org \
--cc=mikhail.anikin@solid-run.com \
--cc=mkl@pengutronix.de \
--cc=peda@axentia.se \
--cc=robh@kernel.org \
--cc=rogerq@kernel.org \
--cc=tony@atomide.com \
--cc=ulf.hansson@linaro.org \
--cc=vigneshr@ti.com \
--cc=vkoul@kernel.org \
--cc=wsa+renesas@sang-engineering.com \
--cc=yazan.shhady@solid-run.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.