Re: [parisc-linux] glibc problem

[Kailashnath V Rampure <kailasr@webcash.com>]

[-- Attachment #1: Type: text/plain, Size: 2259 bytes --]

Hi Matt,

I could run as you told but had problems so i did what helge had (you need 
to go to /palo/ipl and do "hppa-linux-ranlib ipl.a". Then go back to /linux 
and do a "make palo" again.) then lif image was created.

But when I type bo lan at HP server Iget the following error
-------------------------
Booting...
Cannot find ENTRY_TEST.

Fail to initialize.

ENTRY_INT
Status=-7
----------------------------------
My config files are as follows:

I have /etc/bootptab file as follows:
-------------------------
linux:\
         hn:\
         sm=255.255.248.0:\
         vm=rfc1048:\
         ht=ether:\
         hd=/tftpboot:\
         bf=vmlinux:\
         ha=0010830339e0:\
         ip=192.168.1.237
--------------------------------

and my exports file reads as :
--------------------------------------------------
/tftpboot/linux linux(rw,no_root_squash)
-------------------------------------------------------

I had changed the NFSROOT line in Makefile in palo  to
NFSROOT = 192.168.1.236:/tftpboot/linux



At 06:47 PM 10/26/00 -0600, Matt Taggart wrote:

>Kailashnath V Rampure writes...
>
> > Thanks Matt,
> >
> > I have downloaded prebuilt cross-compiler but can you direct me to any
> > documentation how to use this cross compiler. I want to do a NFS boot. I
>
>Untar it in /, it will live in /opt/palinux.
>Add /opt/palinux/bin to your path
>Edit palo/Makefile and set it up for nfsroot, mine has the following line,
>
>NFSROOT = 15.1.51.72:/tftpboot/geordi
>
>That's the location of my nfsroot. Make sure you export it. My /etc/exports
>contains,
>
>/tftpboot/geordi                15.1.51.73(rw,no_root_squash)
>
>Then in the linux directory do,
>
>make oldconfig (maybe answer questions)
>make dep;make clean
>make palo
>
>Setup your bootp server to point to the lifimage generated. My /etc/bootptab
>contains,
>
>geordi:\
>         hn:\
>         sm=255.255.248.0:\
>         vm=rfc1048:\
>         ht=ether:\
>         hd=/tftpboot:\
>         bf=lif-geordi:\
>         ha=0800097891EB:\
>         ip=15.1.51.73
>
>and /tftpboot/lif-geordi is a symlink to palo/lifimage
>
>Hopefully that's enough information to get you going. If you have problems
>please let me know how far you get.
>
>Thanks,
>
>--
>Matt Taggart
>taggart@fc.hp.com

[-- Attachment #2: Type: text/html, Size: 3319 bytes --]