* AT91SAM9263-ek - Kernel panic [not found] <500C4933.8050202@web.de> @ 2012-07-22 21:10 ` Stutz Sven 2012-07-23 5:48 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 1 reply; 3+ messages in thread From: Stutz Sven @ 2012-07-22 21:10 UTC (permalink / raw) To: barebox [-- Attachment #1.1: Type: text/plain, Size: 9744 bytes --] Hello to everybody, previously I have had some doubts to run a Linux kernel on this evalboard. Especially to find a BSP for my board .... In the meantime I have had some problems which I was able to solve by myself or reading through different forums. I still have some problems with Barebox and it's ECC for the NAND-Flash and also the asterix * in this nand -a /dev/nand0.* is not working. (It is working when I am doing it manually). But in total I am able to load and start Barebox and then again loading and starting the kernel. First I have seen nothing until I switch on the special function earlyprintk=serial,ttyS0,115200n8 After that I saw that I have mounting/partitioning problem, so I changed the board specific init.c in that way that the first three partitions match exactly to the definition in the configuration file for the init script of Barebox. init.c > devfs_add_partition("nand0", 0x00000, SZ_128K, DEVFS_PARTITION_FIXED,"at91bootstrap_raw"); dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap"); devfs_add_partition("nand0", SZ_128K, SZ_256K, DEVFS_PARTITION_FIXED, "self_raw"); dev_add_bb_dev("self_raw", "self0"); devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, DEVFS_PARTITION_FIXED, "env_raw"); dev_add_bb_dev("env_raw", "env0"); env/config > nand_parts="128k(at91bootstrap),256k(barebox),128k(bareboxenv),4M(kernel),80M(rootfs),-(data)" rootfs_mtdblock_nand=4 rootfs_mtdblock_type=jffs2 After that I was really happy that the kernel is prompting "VFS: Mounted root (jffs2 filesystem)" But the next kernel panic is near It cannot find a init script. I tried init=/bin/init, init=/sbin/init init=linuxrc everything with out success each time the same failure occur. I also tried to execute a simple command like init=/bin/ls ... But I see in sysroot-target a softlink linuxrc -> /bin/busybox and also in the root-folder root/sbin/ init-> ../bin/busybox Waht is the difference of those directories? (I thought the root folder is the result for the target, so everything in there will be contained in the root.jffs2) I have also changed in busybox between soft and hard links ... How can I solve this problem? Has anyone a hint for me, pls? If it is helpfull here the last kernel outputs > > Image Name: Linux-3.4.0 > Created: 2012-07-20 11:10:09 UTC > OS: Linux > Architecture: ARM > Type: Kernel Image > Compression: uncompressed > Data Size: 1720712 Bytes = 1.6 MB > Load Address: 20008000 > Entry Point: 20008000 > > commandline: console=ttyS0,115200n8 mem=64M > earlyprintk=serial,ttyS0,115200n8 init=/sbin/init root=/dev/mtdblock4 > rw rootfstype=jffs2 noinitrd > mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox),128k(bareboxenv),4M(kernel),80M(rootfs),-(data) > arch_number: 1202 > Uncompressing Linux... done, booting the kernel. > [ 0.000000] Booting Linux on physical CPU 0 > [ 0.000000] Linux version 3.4.0 (user@ubuntu) (gcc version 4.5.2 > (OSELAS.Toolchain-2011.03.1) ) #30 Fri Jul 20 13:09:33 CEST 2012 > [ 0.000000] bootconsole [earlycon0] enabled > [ 0.000000] AT91: Detected soc type: at91sam9263 > [ 0.000000] AT91: Detected soc subtype: Unknown > [ 0.000000] AT91: sram at 0x300000 of 0x14000 mapped at 0xfef64000 > [ 0.000000] AT91: sram at 0x500000 of 0x4000 mapped at 0xfef60000 > [ 0.000000] gpiochip_add: registered GPIOs 0 to 31 on device: pioA > [ 0.000000] gpiochip_add: registered GPIOs 32 to 63 on device: pioB > [ 0.000000] gpiochip_add: registered GPIOs 64 to 95 on device: pioC > [ 0.000000] gpiochip_add: registered GPIOs 96 to 127 on device: pioD > [ 0.000000] gpiochip_add: registered GPIOs 128 to 159 on device: pioE > [ 0.000000] Kernel command line: console=ttyS0,115200n8 mem=64M > earlyprintk=serial,ttyS0,115200n8 init=/sbin/init root=/dev/mtdblock4 > rw rootfstype=jffs2 noinitrd > mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox),128k(bareboxenv),4M(kernel),80M(rootfs),-(data) > [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) > [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 > bytes) > [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 > bytes) > [ 0.000000] Memory: 64MB = 64MB total > [ 0.000000] Memory: 61072k/61072k available, 4464k reserved, 0K highmem > [ 0.000000] Virtual kernel memory layout: > [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) > [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) > [ 0.000000] vmalloc : 0xc4800000 - 0xff000000 ( 936 MB) > [ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) > [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) > [ 0.000000] .text : 0xc0008000 - 0xc0324000 (3184 kB) > [ 0.000000] .init : 0xc0324000 - 0xc0349000 ( 148 kB) > [ 0.000000] .data : 0xc034a000 - 0xc03767a8 ( 178 kB) > [ 0.000000] .bss : 0xc03767cc - 0xc03c313c ( 307 kB) > [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, > CPUs=1, Nodes=1 > [ 0.000000] NR_IRQS:192 > [ 0.000000] AT91: 160 gpio irqs in 5 banks > [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, > wraps every 4294967286ms > [ 0.000000] Calibrating delay loop... 99.22 BogoMIPS (lpj=496128) > [ 0.100000] pid_max: default: 32768 minimum: 301 > [ 0.100000] Mount-cache hash table entries: 512 > [ 0.110000] CPU: Testing write buffer coherency: ok > [ 0.120000] ftrace: allocating 10076 entries in 30 pages > [ 0.230000] Setting up static identity map for 0x2025add0 - 0x2025ae0c > [ 0.240000] devtmpfs: initialized > [ 0.260000] NET: Registered protocol family 16 > [ 0.270000] AT91: Power Management > [ 0.270000] AT91: Starting after user reset > [ 0.290000] bio: create slab <bio-0> at 0 > [ 0.290000] Switching to clocksource pit > [ 0.330000] NET: Registered protocol family 2 > [ 0.340000] IP route cache hash table entries: 1024 (order: 0, 4096 > bytes) > [ 0.350000] TCP established hash table entries: 2048 (order: 2, > 16384 bytes) > [ 0.350000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) > [ 0.360000] TCP: Hash tables configured (established 2048 bind 2048) > [ 0.370000] TCP: reno registered > [ 0.370000] UDP hash table entries: 256 (order: 0, 4096 bytes) > [ 0.380000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) > [ 0.390000] NET: Registered protocol family 1 > [ 0.390000] NetWinder Floating Point Emulator V0.97 (double precision) > [ 0.440000] VFS: Disk quotas dquot_6.5.2 > [ 0.440000] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc. > [ 0.450000] msgmni has been set to 119 > [ 0.460000] Block layer SCSI generic (bsg) driver version 0.4 > loaded (major 254) > [ 0.470000] io scheduler noop registered > [ 0.470000] io scheduler deadline registered > [ 0.480000] io scheduler cfq registered (default) > [ 0.490000] atmel_usart.0: ttyS0 at MMIO 0xffffee00 (irq = 1) is a > ATMEL_SERIAL > [ 0.500000] console [ttyS0] enabled, bootconsole disabled > [ 0.500000] console [ttyS0] enabled, bootconsole disabled > [ 0.510000] atmel_usart.1: ttyS1 at MMIO 0xfff8c000 (irq = 7) is a > ATMEL_SERIAL > [ 0.540000] atmel_nand: Use On Flash BBT > [ 0.550000] atmel_nand atmel_nand: No DMA support for NAND access. > [ 0.550000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda > (Micron NAND 256MiB 3,3V 8-bit) > [ 0.560000] Bad block table found at page 131008, version 0x01 > [ 0.570000] Bad block table found at page 130944, version 0x01 > [ 0.580000] 6 cmdlinepart partitions found on MTD device atmel_nand > [ 0.580000] Creating 6 MTD partitions on "atmel_nand": > [ 0.590000] 0x000000000000-0x000000020000 : "at91bootstrap" > [ 0.600000] 0x000000020000-0x000000060000 : "barebox" > [ 0.610000] 0x000000060000-0x000000080000 : "bareboxenv" > [ 0.620000] 0x000000080000-0x000000480000 : "kernel" > [ 0.630000] 0x000000480000-0x000005480000 : "rootfs" > [ 0.640000] 0x000005480000-0x000010000000 : "data" > [ 0.650000] GPIO NAND driver, © 2004 Simtec Electronics > [ 0.660000] TCP: cubic registered > [ 0.660000] NET: Registered protocol family 17 > [ 0.670000] Registering the dns_resolver key type > [ 9.860000] VFS: Mounted root (jffs2 filesystem) on device 31:4. > [ 9.870000] devtmpfs: mounted > [ 9.870000] Freeing init memory: 148K > [ 11.830000] Failed to execute /sbin/init. Attempting defaults... > [ 11.860000] Kernel panic - not syncing: No init found. Try passing > init= option to kernel. See Linux Documentation/init.txt for guidance. > [ 11.870000] Backtrace: > [ 11.870000] [<c00120f4>] (dump_backtrace+0x0/0x118) from > [<c02587e0>] (dump_stack+0x20/0x24) > [ 11.880000] r6:c033a44c r5:c033a46c r4:c03767e0 > [ 11.890000] [<c02587c0>] (dump_stack+0x0/0x24) from [<c0258864>] > (panic+0x80/0x1c8) > [ 11.890000] [<c02587e4>] (panic+0x0/0x1c8) from [<c0008850>] > (init_post+0xb0/0xd4) > [ 11.900000] r3:00000001 r2:c04460a8 r1:c04342e0 r0:c02dad7e > [ 11.910000] r7:c03767e0 > [ 11.910000] [<c00087a0>] (init_post+0x0/0xd4) from [<c0324924>] > (kernel_init+0x164/0x1a4) > [ 11.920000] r4:c03767e0 > [ 11.920000] [<c03247c0>] (kernel_init+0x0/0x1a4) from [<c00209f8>] > (do_exit+0x0/0x334) best regards Sven [-- Attachment #1.2: Type: text/html, Size: 12415 bytes --] [-- Attachment #2: Type: text/plain, Size: 149 bytes --] _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: AT91SAM9263-ek - Kernel panic 2012-07-22 21:10 ` AT91SAM9263-ek - Kernel panic Stutz Sven @ 2012-07-23 5:48 ` Jean-Christophe PLAGNIOL-VILLARD 2012-07-25 20:39 ` Stutz Sven 0 siblings, 1 reply; 3+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-07-23 5:48 UTC (permalink / raw) To: Stutz Sven; +Cc: barebox On 23:10 Sun 22 Jul , Stutz Sven wrote: > Hello to everybody, > > previously I have had some doubts to run a Linux kernel on this evalboard. > Especially to find a BSP for my board .... > > In the meantime I have had some problems which I was able to solve by > myself or reading through different forums. the mainline kernel work perfectly on it > > I still have some problems with Barebox and it's ECC for the NAND-Flash > and also the asterix * in this nand -a /dev/nand0.* is not working. (It is > working when I am doing it manually). > > But in total I am able to load and start Barebox and then again loading > and starting the kernel. > > First I have seen nothing until I switch on the special function > earlyprintk=serial,ttyS0,115200n8 > After that I saw that I have mounting/partitioning problem, so I changed > the board specific init.c > in that way that the first three partitions match exactly to the > definition in the configuration file for the init script of Barebox. > > init.c > devfs_add_partition("nand0", 0x00000, SZ_128K, > DEVFS_PARTITION_FIXED,"at91bootstrap_raw"); > dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap"); > devfs_add_partition("nand0", SZ_128K, SZ_256K, > DEVFS_PARTITION_FIXED, "self_raw"); > dev_add_bb_dev("self_raw", "self0"); > devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, > DEVFS_PARTITION_FIXED, "env_raw"); > dev_add_bb_dev("env_raw", "env0"); > > env/config > > nand_parts="128k(at91bootstrap),256k(barebox),128k(bareboxenv),4M(kernel),80M(rootfs),-(data)" > rootfs_mtdblock_nand=4 > rootfs_mtdblock_type=jffs2 > > After that I was really happy that the kernel is prompting "VFS: Mounted > root (jffs2 filesystem)" > But the next kernel panic is near > It cannot find a init script. > I tried init=/bin/init, init=/sbin/init init=linuxrc everything with out > success each time the same failure occur. I also tried to execute a simple > command like init=/bin/ls ... > > But I see in sysroot-target a softlink linuxrc -> /bin/busybox and also > in the root-folder root/sbin/ init-> ../bin/busybox > Waht is the difference of those directories? (I thought the root folder is > the result for the target, so everything in there will be contained in the > root.jffs2) > > I have also changed in busybox between soft and hard links ... > How can I solve this problem? > Has anyone a hint for me, pls? it seems you use the wrong ABI to complie your rootfs Best Regards, J. _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: AT91SAM9263-ek - Kernel panic 2012-07-23 5:48 ` Jean-Christophe PLAGNIOL-VILLARD @ 2012-07-25 20:39 ` Stutz Sven 0 siblings, 0 replies; 3+ messages in thread From: Stutz Sven @ 2012-07-25 20:39 UTC (permalink / raw) To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox Hello, I am sorry for my late message. But Am 23.07.2012 07:48, schrieb Jean-Christophe PLAGNIOL-VILLARD: > On 23:10 Sun 22 Jul , Stutz Sven wrote: >> Hello to everybody, >> >> previously I have had some doubts to run a Linux kernel on this evalboard. >> Especially to find a BSP for my board .... >> >> In the meantime I have had some problems which I was able to solve by >> myself or reading through different forums. > the mainline kernel work perfectly on it I guess it should so and with ptxdist it is also more or less easy to adjust the correct settings. (I hope so :-) ) >> But in total I am able to load and start Barebox and then again loading >> and starting the kernel. >> >> First I have seen nothing until I switch on the special function >> earlyprintk=serial,ttyS0,115200n8 >> After that I saw that I have mounting/partitioning problem, so I changed >> the board specific init.c >> in that way that the first three partitions match exactly to the >> definition in the configuration file for the init script of Barebox. >> >> init.c > devfs_add_partition("nand0", 0x00000, SZ_128K, >> DEVFS_PARTITION_FIXED,"at91bootstrap_raw"); >> dev_add_bb_dev("at91bootstrap_raw", "at91bootstrap"); >> devfs_add_partition("nand0", SZ_128K, SZ_256K, >> DEVFS_PARTITION_FIXED, "self_raw"); >> dev_add_bb_dev("self_raw", "self0"); >> devfs_add_partition("nand0", SZ_256K + SZ_128K, SZ_128K, >> DEVFS_PARTITION_FIXED, "env_raw"); >> dev_add_bb_dev("env_raw", "env0"); >> >> env/config > >> nand_parts="128k(at91bootstrap),256k(barebox),128k(bareboxenv),4M(kernel),80M(rootfs),-(data)" >> rootfs_mtdblock_nand=4 >> rootfs_mtdblock_type=jffs2 >> >> After that I was really happy that the kernel is prompting "VFS: Mounted >> root (jffs2 filesystem)" >> But the next kernel panic is near >> It cannot find a init script. >> I tried init=/bin/init, init=/sbin/init init=linuxrc everything with out >> success each time the same failure occur. I also tried to execute a simple >> command like init=/bin/ls ... >> >> But I see in sysroot-target a softlink linuxrc -> /bin/busybox and also >> in the root-folder root/sbin/ init-> ../bin/busybox >> Waht is the difference of those directories? (I thought the root folder is >> the result for the target, so everything in there will be contained in the >> root.jffs2) >> >> I have also changed in busybox between soft and hard links ... >> How can I solve this problem? >> Has anyone a hint for me, pls? > it seems you use the wrong ABI to complie your rootfs But when I mount the rootfs.jffs2 on my Pc I see all directories (bin/, sbin/, etc/ , ....) and all the commands are build in and linked to busybox. file test/bin/busybox test/bin/busybox: setuid ELF 32-bit LSB shared object, ARM, version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.23, stripped > > Best Regards, > J. Unfortunately I have done some bad changes that the rootfs is no longer been mounted on startup :-( see .. > barebox 2012.07.0 #53 Mon Jul 23 11:14:05 CEST 2012 Board: Atmel > at91sam9263-ek Just for test 21 Clocks: CPU 199 MHz, master 99 MHz, > main 16.367 MHz atmel_nand: Use On Flash BBT NAND device: Manufacturer > ID: 0x2c, Chip ID: 0xda (Micron NaND 256MiB 3,3V 8-bit) NAND_ECC_NONE > selected by board driver. This is not recommended !! I now I try to fix this later ... > Bad block table found at page 131008, version 0x01 Bad block table > found at page 130944, version 0x01 cfi_flash@cfi_flash0: found cfi > flash at 10000000, size 4194304 Malloc space: 0x23b00000 -> 0x23efffff > (size 4 MB) Stack space : 0x23af8000 -> 0x23b00000 (size 32 kB) Hit > any key to stop autoboot: 0 booting kernel from /dev/nand0.kernel.bb > Image Name: Linux-3.4.0 Created: 2012-07-25 15:30:15 UTC OS: Linux > Architecture: ARM Type: Kernel Image Compression: uncompressed Data > Size: 1683440 Bytes = 1.6 MB Load Address: 20008000 Entry Point: > 20008000 ***************************************** *** LOADING IMAGE > TO SDRAM! *** ***************************************** commandline: > console=ttyS0,115200n8 mem=64M earlyprintk=serial,ttyS0,115200n8, > init=/bin/ls root=/dev/mtdblock4 rootfstype=jffs2 noinitrd > mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox),128k(bareboxenv),4M(kernel)ro,20M(root)ro,-(data) > arch_number: 1202 Uncompressing Linux... done, booting the kernel. [ > 0.000000] Booting Linux on physical CPU 0 [ 0.000000] Linux version > 3.4.0 (user@ubuntu) (gcc version 4.6.2 (OSELAS.Toolchain-2011.11.1) ) > #14 Wed Jul 25 17:29:36 CEST 2012 [ 0.000000] bootconsole [earlycon0] > enabled [ 0.000000] AT91: Detected soc type: at91sam9263 [ 0.000000] > AT91: Detected soc subtype: Unknown [ 0.000000] AT91: sram at 0x300000 > of 0x14000 mapped at 0xfef64000 [ 0.000000] AT91: sram at 0x500000 of > 0x4000 mapped at 0xfef60000 [ 0.000000] gpiochip_add: registered GPIOs > 0 to 31 on device: pioA [ 0.000000] gpiochip_add: registered GPIOs 32 > to 63 on device: pioB [ 0.000000] gpiochip_add: registered GPIOs 64 to > 95 on device: pioC [ 0.000000] gpiochip_add: registered GPIOs 96 to > 127 on device: pioD [ 0.000000] gpiochip_add: registered GPIOs 128 to > 159 on device: pioE [ 0.000000] Kernel command line: > console=ttyS0,115200n8 mem=64M earlyprintk=serial,ttyS0,115200n8, > init=/bin/ls root=/dev/mtdblock4 rootfstype=jffs2 noinitrd > mtdparts=atmel_nand:128k(at91bootstrap),256k(barebox),128k(bareboxenv),4M(kernel)ro,20M(root)ro,-(data) > [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes) [ > 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 > bytes) [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, > 16384 bytes) [ 0.000000] Memory: 64MB = 64MB total [ 0.000000] Memory: > 60964k/60964k available, 4572k reserved, 0K highmem [ 0.000000] > Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - > 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 > kB) [ 0.000000] vmalloc : 0xc4800000 - 0xff000000 ( 936 MB) [ > 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB) [ 0.000000] > modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .text : > 0xc0008000 - 0xc032da1c (3223 kB) [ 0.000000] .init : 0xc032e000 - > 0xc0354000 ( 152 kB) [ 0.000000] .data : 0xc0354000 - 0xc0381b40 ( 183 > kB) [ 0.000000] .bss : 0xc0381b64 - 0xc03ceafc ( 308 kB) [ 0.000000] > NR_IRQS:192 [ 0.000000] AT91: 160 gpio irqs in 5 banks [ 0.000000] > sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every > 4294967286ms [ 0.010000] Calibrating delay loop... 99.22 BogoMIPS > (lpj=496128) [ 0.100000] pid_max: default: 32768 minimum: 301 [ > 0.110000] Mount-cache hash table entries: 512 [ 0.130000] CPU: Testing > write buffer coherency: ok [ 0.140000] ftrace: allocating 9496 entries > in 28 pages [ 0.250000] Setting up static identity map for 0x20231900 > - 0x2023193c [ 0.270000] devtmpfs: initialized [ 0.410000] NET: > Registered protocol family 16 [ 0.420000] AT91: Power Management [ > 0.430000] AT91: Starting after software reset [ 0.960000] DMA-API: > preallocated 4096 debug entries [ 0.970000] DMA-API: debugging enabled > by kernel config [ 0.980000] Switching to clocksource tcb_clksrc [ > 1.250000] NET: Registered protocol family 2 [ 1.250000] IP route cache > hash table entries: 1024 (order: 0, 4096 bytes) [ 1.270000] TCP > established hash table entries: 2048 (order: 2, 16384 bytes) [ > 1.280000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ > 1.290000] TCP: Hash tables configured (established 2048 bind 2048) [ > 1.290000] TCP: reno registered [ 1.300000] UDP hash table entries: 256 > (order: 0, 4096 bytes) [ 1.310000] UDP-Lite hash table entries: 256 > (order: 0, 4096 bytes) [ 1.320000] NET: Registered protocol family 1 [ > 1.350000] VFS: Disk quotas dquot_6.5.2 [ 1.360000] jffs2: version 2.2. > (NAND) © 2001-2006 Red Hat, Inc. [ 1.380000] fuse init (API version > 7.18) [ 1.390000] msgmni has been set to 119 [ 1.420000] crc32: > CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 1.430000] crc32: self tests > passed, processed 225944 bytes in 10137617 nsec [ 1.450000] crc32c: > CRC_LE_BITS = 64 [ 1.450000] crc32c: self tests passed, processed > 225944 bytes in 4237472 nsec [ 1.480000] atmel_usart.0: ttyS0 at MMIO > 0xffffee00 (irq = 1) is a ATMEL_SERIAL [ 1.490000] console [ttyS0] > enabled, bootconsole disabled [ 1.490000] console [ttyS0] enabled, > bootconsole disabled [ 1.500000] atmel_usart.1: ttyS1 at MMIO > 0xfff8c000 (irq = 7) is a ATMEL_SERIAL [ 1.540000] atmel_nand: Use On > Flash BBT [ 1.550000] atmel_nand atmel_nand: No DMA support for NAND > access. Is this a problem that I have no DMA support? > [ 1.550000] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron > NAND 256MiB 3,3V 8-bit) [ 1.560000] Bad block table found at page > 131008, version 0x01 [ 1.570000] Bad block table found at page 130944, > version 0x01 [ 1.580000] 6 cmdlinepart partitions found on MTD device > atmel_nand [ 1.580000] Creating 6 MTD partitions on "atmel_nand": [ > 1.590000] 0x000000000000-0x000000020000 : "at91bootstrap" [ 1.600000] > 0x000000020000-0x000000060000 : "barebox" [ 1.610000] > 0x000000060000-0x000000080000 : "bareboxenv" [ 1.620000] > 0x000000080000-0x000000480000 : "kernel" [ 1.630000] > 0x000000480000-0x000001880000 : "root" [ 1.630000] > 0x000001880000-0x000010000000 : "data" [ 1.650000] GPIO NAND driver, © > 2004 Simtec Electronics [ 1.650000] atmel_spi atmel_spi.0: Atmel SPI > Controller at 0xfffa4000 (irq 14) [ 1.660000] atmel_spi atmel_spi.0: > master is unqueued, this is deprecated [ 1.680000] TCP: cubic registered here I miss mount rootfs > [ 1.680000] NET: Registered protocol family 17 [ 1.700000] devtmpfs: > mounted [ 1.700000] Freeing init memory: 152K [ 1.710000] Failed to > execute /bin/ls. Attempting defaults... [ 1.720000] Kernel panic - not > syncing: No init found. Try passing init= option to kernel. See Linux > Documentation/init.txt for guidance. [ 1.730000] [<c000e254>] > (unwind_backtrace+0x0/0x128) from [<c02292e0>] (dump_stack+0x20/0x24) > [ 1.740000] [<c02292e0>] (dump_stack+0x20/0x24) from [<c02293e8>] > (panic+0x80/0x1c8) [ 1.750000] [<c02293e8>] (panic+0x80/0x1c8) from > [<c02290a8>] (init_post+0xb0/0xd4) [ 1.750000] [<c02290a8>] > (init_post+0xb0/0xd4) from [<c032e998>] (kernel_init+0xcc/0xf0) I will report my results .... best regards Sven _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-07-25 20:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <500C4933.8050202@web.de>
2012-07-22 21:10 ` AT91SAM9263-ek - Kernel panic Stutz Sven
2012-07-23 5:48 ` Jean-Christophe PLAGNIOL-VILLARD
2012-07-25 20:39 ` Stutz Sven
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.