From: Larry Finger <Larry.Finger@lwfinger.net>
To: "Rafał Miłecki" <zajec5@gmail.com>
Cc: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>,
b43-dev@lists.infradead.org
Subject: [PATCH] b43: be more user friendly with PHY info
Date: Mon, 23 Jul 2012 11:46:28 -0500 [thread overview]
Message-ID: <500D7FE4.1090100@lwfinger.net> (raw)
In-Reply-To: <1343063462-3719-1-git-send-email-zajec5@gmail.com>
On 07/23/2012 12:11 PM, Rafa? Mi?ecki wrote:
> First of all, use PHY names instead of magic numbers. It should make
> configuring kernel easier in case of not enabled PHY type support.
> Secondly, always print info about PHY. This is really basic info about
> hardware and quite important for the support level.
>
> Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
> ---
> drivers/net/wireless/b43/main.c | 36 +++++++++++++++++++++++++++++++-----
> 1 files changed, 31 insertions(+), 5 deletions(-)
I like this change. It is worth the small increase in the size of b43.
Larry
>
> diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
> index b80352b..a56f182 100644
> --- a/drivers/net/wireless/b43/main.c
> +++ b/drivers/net/wireless/b43/main.c
> @@ -4277,6 +4277,33 @@ out:
> return err;
> }
>
> +static char *b43_phy_name(struct b43_wldev *dev, u8 phy_type)
> +{
> + switch (phy_type) {
> + case B43_PHYTYPE_A:
> + return "A";
> + case B43_PHYTYPE_B:
> + return "B";
> + case B43_PHYTYPE_G:
> + return "G";
> + case B43_PHYTYPE_N:
> + return "N";
> + case B43_PHYTYPE_LP:
> + return "LP";
> + case B43_PHYTYPE_SSLPN:
> + return "SSLPN";
> + case B43_PHYTYPE_HT:
> + return "HT";
> + case B43_PHYTYPE_LCN:
> + return "LCN";
> + case B43_PHYTYPE_LCNXN:
> + return "LCNXN";
> + }
> +
> + b43err(dev->wl, "Unknown PHY Type: %d\n", phy_type);
> + return "UNKNOWN";
> +}
> +
> /* Get PHY and RADIO versioning numbers */
> static int b43_phy_versioning(struct b43_wldev *dev)
> {
> @@ -4337,13 +4364,12 @@ static int b43_phy_versioning(struct b43_wldev *dev)
> unsupported = 1;
> }
> if (unsupported) {
> - b43err(dev->wl, "FOUND UNSUPPORTED PHY "
> - "(Analog %u, Type %u, Revision %u)\n",
> - analog_type, phy_type, phy_rev);
> + b43err(dev->wl, "FOUND UNSUPPORTED PHY (Analog %u, Type %s, Revision %u)\n",
> + analog_type, b43_phy_name(dev, phy_type), phy_rev);
> return -EOPNOTSUPP;
> }
> - b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n",
> - analog_type, phy_type, phy_rev);
> + b43info(dev->wl, "Found PHY: Analog %u, Type %s, Revision %u\n",
> + analog_type, b43_phy_name(dev, phy_type), phy_rev);
>
> /* Get RADIO versioning */
> if (dev->dev->core_rev >= 24) {
>
WARNING: multiple messages have this Message-ID (diff)
From: Larry Finger <Larry.Finger@lwfinger.net>
To: "Rafał Miłecki" <zajec5@gmail.com>
Cc: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>,
b43-dev@lists.infradead.org
Subject: Re: [PATCH] b43: be more user friendly with PHY info
Date: Mon, 23 Jul 2012 11:46:28 -0500 [thread overview]
Message-ID: <500D7FE4.1090100@lwfinger.net> (raw)
In-Reply-To: <1343063462-3719-1-git-send-email-zajec5@gmail.com>
On 07/23/2012 12:11 PM, Rafał Miłecki wrote:
> First of all, use PHY names instead of magic numbers. It should make
> configuring kernel easier in case of not enabled PHY type support.
> Secondly, always print info about PHY. This is really basic info about
> hardware and quite important for the support level.
>
> Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
> ---
> drivers/net/wireless/b43/main.c | 36 +++++++++++++++++++++++++++++++-----
> 1 files changed, 31 insertions(+), 5 deletions(-)
I like this change. It is worth the small increase in the size of b43.
Larry
>
> diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
> index b80352b..a56f182 100644
> --- a/drivers/net/wireless/b43/main.c
> +++ b/drivers/net/wireless/b43/main.c
> @@ -4277,6 +4277,33 @@ out:
> return err;
> }
>
> +static char *b43_phy_name(struct b43_wldev *dev, u8 phy_type)
> +{
> + switch (phy_type) {
> + case B43_PHYTYPE_A:
> + return "A";
> + case B43_PHYTYPE_B:
> + return "B";
> + case B43_PHYTYPE_G:
> + return "G";
> + case B43_PHYTYPE_N:
> + return "N";
> + case B43_PHYTYPE_LP:
> + return "LP";
> + case B43_PHYTYPE_SSLPN:
> + return "SSLPN";
> + case B43_PHYTYPE_HT:
> + return "HT";
> + case B43_PHYTYPE_LCN:
> + return "LCN";
> + case B43_PHYTYPE_LCNXN:
> + return "LCNXN";
> + }
> +
> + b43err(dev->wl, "Unknown PHY Type: %d\n", phy_type);
> + return "UNKNOWN";
> +}
> +
> /* Get PHY and RADIO versioning numbers */
> static int b43_phy_versioning(struct b43_wldev *dev)
> {
> @@ -4337,13 +4364,12 @@ static int b43_phy_versioning(struct b43_wldev *dev)
> unsupported = 1;
> }
> if (unsupported) {
> - b43err(dev->wl, "FOUND UNSUPPORTED PHY "
> - "(Analog %u, Type %u, Revision %u)\n",
> - analog_type, phy_type, phy_rev);
> + b43err(dev->wl, "FOUND UNSUPPORTED PHY (Analog %u, Type %s, Revision %u)\n",
> + analog_type, b43_phy_name(dev, phy_type), phy_rev);
> return -EOPNOTSUPP;
> }
> - b43dbg(dev->wl, "Found PHY: Analog %u, Type %u, Revision %u\n",
> - analog_type, phy_type, phy_rev);
> + b43info(dev->wl, "Found PHY: Analog %u, Type %s, Revision %u\n",
> + analog_type, b43_phy_name(dev, phy_type), phy_rev);
>
> /* Get RADIO versioning */
> if (dev->dev->core_rev >= 24) {
>
next prev parent reply other threads:[~2012-07-23 16:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-23 17:11 [PATCH] b43: be more user friendly with PHY info Rafał Miłecki
2012-07-23 17:11 ` Rafał Miłecki
2012-07-23 16:46 ` Larry Finger [this message]
2012-07-23 16:46 ` Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=500D7FE4.1090100@lwfinger.net \
--to=larry.finger@lwfinger.net \
--cc=b43-dev@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.