[PATCH v8 0/7] power management patch set

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH v8 0/7] power management patch set
@ 2012-07-20 12:42 ` Zhao Chenhui
  0 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel

Changes for v8:
* Separated the cpu hotplug patch into three patches, as follows
  [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
  [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
  [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support

* Replaced magic numbers with macros in "[PATCH 5/7] powerpc/85xx: add sleep and deep sleep support"

* no change to the rest of the patch set

^ permalink raw reply	[flat|nested] 39+ messages in thread

* [PATCH v8 0/7] power management patch set
@ 2012-07-20 12:42 ` Zhao Chenhui
  0 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel, leoli

Changes for v8:
* Separated the cpu hotplug patch into three patches, as follows
  [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
  [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
  [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support

* Replaced magic numbers with macros in "[PATCH 5/7] powerpc/85xx: add sleep and deep sleep support"

* no change to the rest of the patch set


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
  2012-07-20 12:42 ` Zhao Chenhui
@ 2012-07-20 12:42   ` Zhao Chenhui
  -1 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
 arch/powerpc/platforms/85xx/smp.c |   46 ++++++++++++++++++------------------
 1 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index ff42490..4827709 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -2,7 +2,7 @@
  * Author: Andy Fleming <afleming@freescale.com>
  * 	   Kumar Gala <galak@kernel.crashing.org>
  *
- * Copyright 2006-2008, 2011 Freescale Semiconductor Inc.
+ * Copyright 2006-2008, 2011-2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/kexec.h>
 #include <linux/highmem.h>
+#include <linux/cpu.h>
 
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -31,23 +32,21 @@
 
 extern void __early_start(void);
 
-#define BOOT_ENTRY_ADDR_UPPER	0
-#define BOOT_ENTRY_ADDR_LOWER	1
-#define BOOT_ENTRY_R3_UPPER	2
-#define BOOT_ENTRY_R3_LOWER	3
-#define BOOT_ENTRY_RESV		4
-#define BOOT_ENTRY_PIR		5
-#define BOOT_ENTRY_R6_UPPER	6
-#define BOOT_ENTRY_R6_LOWER	7
-#define NUM_BOOT_ENTRY		8
-#define SIZE_BOOT_ENTRY		(NUM_BOOT_ENTRY * sizeof(u32))
+struct epapr_spin_table {
+	u32	addr_h;
+	u32	addr_l;
+	u32	r3_h;
+	u32	r3_l;
+	u32	reserved;
+	u32	pir;
+};
 
 static int __init
 smp_85xx_kick_cpu(int nr)
 {
 	unsigned long flags;
 	const u64 *cpu_rel_addr;
-	__iomem u32 *bptr_vaddr;
+	__iomem struct epapr_spin_table *spin_table;
 	struct device_node *np;
 	int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
 	int ioremappable;
@@ -75,19 +74,20 @@ smp_85xx_kick_cpu(int nr)
 
 	/* Map the spin table */
 	if (ioremappable)
-		bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+		spin_table = ioremap(*cpu_rel_addr,
+				sizeof(struct epapr_spin_table));
 	else
-		bptr_vaddr = phys_to_virt(*cpu_rel_addr);
+		spin_table = phys_to_virt(*cpu_rel_addr);
 
 	local_irq_save(flags);
 
-	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu);
+	out_be32(&spin_table->pir, hw_cpu);
 #ifdef CONFIG_PPC32
-	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
+	out_be32(&spin_table->addr_l, __pa(__early_start));
 
 	if (!ioremappable)
-		flush_dcache_range((ulong)bptr_vaddr,
-				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+		flush_dcache_range((ulong)spin_table,
+			(ulong)spin_table + sizeof(struct epapr_spin_table));
 
 	/* Wait a bit for the CPU to ack. */
 	while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
@@ -95,18 +95,18 @@ smp_85xx_kick_cpu(int nr)
 #else
 	smp_generic_kick_cpu(nr);
 
-	out_be64((u64 *)(bptr_vaddr + BOOT_ENTRY_ADDR_UPPER),
-		__pa((u64)*((unsigned long long *) generic_secondary_smp_init)));
+	out_be64((u64 *)(&spin_table->addr_h),
+	  __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
 
 	if (!ioremappable)
-		flush_dcache_range((ulong)bptr_vaddr,
-				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+		flush_dcache_range((ulong)spin_table,
+			(ulong)spin_table + sizeof(struct epapr_spin_table));
 #endif
 
 	local_irq_restore(flags);
 
 	if (ioremappable)
-		iounmap(bptr_vaddr);
+		iounmap(spin_table);
 
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 
-- 
1.6.4.1

^ permalink raw reply related	[flat|nested] 39+ messages in thread

* [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
@ 2012-07-20 12:42   ` Zhao Chenhui
  0 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel, leoli

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
 arch/powerpc/platforms/85xx/smp.c |   46 ++++++++++++++++++------------------
 1 files changed, 23 insertions(+), 23 deletions(-)

diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index ff42490..4827709 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -2,7 +2,7 @@
  * Author: Andy Fleming <afleming@freescale.com>
  * 	   Kumar Gala <galak@kernel.crashing.org>
  *
- * Copyright 2006-2008, 2011 Freescale Semiconductor Inc.
+ * Copyright 2006-2008, 2011-2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/kexec.h>
 #include <linux/highmem.h>
+#include <linux/cpu.h>
 
 #include <asm/machdep.h>
 #include <asm/pgtable.h>
@@ -31,23 +32,21 @@
 
 extern void __early_start(void);
 
-#define BOOT_ENTRY_ADDR_UPPER	0
-#define BOOT_ENTRY_ADDR_LOWER	1
-#define BOOT_ENTRY_R3_UPPER	2
-#define BOOT_ENTRY_R3_LOWER	3
-#define BOOT_ENTRY_RESV		4
-#define BOOT_ENTRY_PIR		5
-#define BOOT_ENTRY_R6_UPPER	6
-#define BOOT_ENTRY_R6_LOWER	7
-#define NUM_BOOT_ENTRY		8
-#define SIZE_BOOT_ENTRY		(NUM_BOOT_ENTRY * sizeof(u32))
+struct epapr_spin_table {
+	u32	addr_h;
+	u32	addr_l;
+	u32	r3_h;
+	u32	r3_l;
+	u32	reserved;
+	u32	pir;
+};
 
 static int __init
 smp_85xx_kick_cpu(int nr)
 {
 	unsigned long flags;
 	const u64 *cpu_rel_addr;
-	__iomem u32 *bptr_vaddr;
+	__iomem struct epapr_spin_table *spin_table;
 	struct device_node *np;
 	int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
 	int ioremappable;
@@ -75,19 +74,20 @@ smp_85xx_kick_cpu(int nr)
 
 	/* Map the spin table */
 	if (ioremappable)
-		bptr_vaddr = ioremap(*cpu_rel_addr, SIZE_BOOT_ENTRY);
+		spin_table = ioremap(*cpu_rel_addr,
+				sizeof(struct epapr_spin_table));
 	else
-		bptr_vaddr = phys_to_virt(*cpu_rel_addr);
+		spin_table = phys_to_virt(*cpu_rel_addr);
 
 	local_irq_save(flags);
 
-	out_be32(bptr_vaddr + BOOT_ENTRY_PIR, hw_cpu);
+	out_be32(&spin_table->pir, hw_cpu);
 #ifdef CONFIG_PPC32
-	out_be32(bptr_vaddr + BOOT_ENTRY_ADDR_LOWER, __pa(__early_start));
+	out_be32(&spin_table->addr_l, __pa(__early_start));
 
 	if (!ioremappable)
-		flush_dcache_range((ulong)bptr_vaddr,
-				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+		flush_dcache_range((ulong)spin_table,
+			(ulong)spin_table + sizeof(struct epapr_spin_table));
 
 	/* Wait a bit for the CPU to ack. */
 	while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
@@ -95,18 +95,18 @@ smp_85xx_kick_cpu(int nr)
 #else
 	smp_generic_kick_cpu(nr);
 
-	out_be64((u64 *)(bptr_vaddr + BOOT_ENTRY_ADDR_UPPER),
-		__pa((u64)*((unsigned long long *) generic_secondary_smp_init)));
+	out_be64((u64 *)(&spin_table->addr_h),
+	  __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
 
 	if (!ioremappable)
-		flush_dcache_range((ulong)bptr_vaddr,
-				(ulong)(bptr_vaddr + SIZE_BOOT_ENTRY));
+		flush_dcache_range((ulong)spin_table,
+			(ulong)spin_table + sizeof(struct epapr_spin_table));
 #endif
 
 	local_irq_restore(flags);
 
 	if (ioremappable)
-		iounmap(bptr_vaddr);
+		iounmap(spin_table);
 
 	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
 
-- 
1.6.4.1



^ permalink raw reply related	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
  2012-07-20 12:42   ` Zhao Chenhui
@ 2012-07-31 14:24     ` Kumar Gala
  -1 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:24 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: scottwood, linuxppc-dev, linux-kernel


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> ---
> arch/powerpc/platforms/85xx/smp.c |   46 =
++++++++++++++++++------------------
> 1 files changed, 23 insertions(+), 23 deletions(-)

applied to next

- k=

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
@ 2012-07-31 14:24     ` Kumar Gala
  0 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:24 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: linuxppc-dev, scottwood, linux-kernel, leoli


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> ---
> arch/powerpc/platforms/85xx/smp.c |   46 ++++++++++++++++++------------------
> 1 files changed, 23 insertions(+), 23 deletions(-)

applied to next

- k

^ permalink raw reply	[flat|nested] 39+ messages in thread

* [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
  2012-07-20 12:42 ` Zhao Chenhui
@ 2012-07-20 12:42   ` Zhao Chenhui
  -1 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel

In the case of cpu hotplug, the cpu_state should be set to CPU_UP_PREPARE when kicking cpu.
Otherwise, the cpu_state is always CPU_DEAD after calling generic_set_cpu_dead(), which
makes the delay in generic_cpu_die() not happen.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
 arch/powerpc/include/asm/smp.h |    1 +
 arch/powerpc/kernel/smp.c      |   12 +++++++++++-
 2 files changed, 12 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index ebc24dc..ce8e2bd 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -65,6 +65,7 @@ int generic_cpu_disable(void);
 void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
 void generic_set_cpu_dead(unsigned int cpu);
+void generic_set_cpu_up(unsigned int cpu);
 int generic_check_cpu_restart(unsigned int cpu);
 #endif
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 0321007..fecb038 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -102,7 +102,7 @@ int __devinit smp_generic_kick_cpu(int nr)
 	 * Ok it's not there, so it might be soft-unplugged, let's
 	 * try to bring it back
 	 */
-	per_cpu(cpu_state, nr) = CPU_UP_PREPARE;
+	generic_set_cpu_up(nr);
 	smp_wmb();
 	smp_send_reschedule(nr);
 #endif /* CONFIG_HOTPLUG_CPU */
@@ -406,6 +406,16 @@ void generic_set_cpu_dead(unsigned int cpu)
 	per_cpu(cpu_state, cpu) = CPU_DEAD;
 }
 
+/*
+ * The cpu_state should be set to CPU_UP_PREPARE in kick_cpu(), otherwise
+ * the cpu_state is always CPU_DEAD after calling generic_set_cpu_dead(),
+ * which makes the delay in generic_cpu_die() not happen.
+ */
+void generic_set_cpu_up(unsigned int cpu)
+{
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+}
+
 int generic_check_cpu_restart(unsigned int cpu)
 {
 	return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
-- 
1.6.4.1

^ permalink raw reply related	[flat|nested] 39+ messages in thread

* [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
@ 2012-07-20 12:42   ` Zhao Chenhui
  0 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel, leoli

In the case of cpu hotplug, the cpu_state should be set to CPU_UP_PREPARE when kicking cpu.
Otherwise, the cpu_state is always CPU_DEAD after calling generic_set_cpu_dead(), which
makes the delay in generic_cpu_die() not happen.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
 arch/powerpc/include/asm/smp.h |    1 +
 arch/powerpc/kernel/smp.c      |   12 +++++++++++-
 2 files changed, 12 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index ebc24dc..ce8e2bd 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -65,6 +65,7 @@ int generic_cpu_disable(void);
 void generic_cpu_die(unsigned int cpu);
 void generic_mach_cpu_die(void);
 void generic_set_cpu_dead(unsigned int cpu);
+void generic_set_cpu_up(unsigned int cpu);
 int generic_check_cpu_restart(unsigned int cpu);
 #endif
 
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index 0321007..fecb038 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -102,7 +102,7 @@ int __devinit smp_generic_kick_cpu(int nr)
 	 * Ok it's not there, so it might be soft-unplugged, let's
 	 * try to bring it back
 	 */
-	per_cpu(cpu_state, nr) = CPU_UP_PREPARE;
+	generic_set_cpu_up(nr);
 	smp_wmb();
 	smp_send_reschedule(nr);
 #endif /* CONFIG_HOTPLUG_CPU */
@@ -406,6 +406,16 @@ void generic_set_cpu_dead(unsigned int cpu)
 	per_cpu(cpu_state, cpu) = CPU_DEAD;
 }
 
+/*
+ * The cpu_state should be set to CPU_UP_PREPARE in kick_cpu(), otherwise
+ * the cpu_state is always CPU_DEAD after calling generic_set_cpu_dead(),
+ * which makes the delay in generic_cpu_die() not happen.
+ */
+void generic_set_cpu_up(unsigned int cpu)
+{
+	per_cpu(cpu_state, cpu) = CPU_UP_PREPARE;
+}
+
 int generic_check_cpu_restart(unsigned int cpu)
 {
 	return per_cpu(cpu_state, cpu) == CPU_UP_PREPARE;
-- 
1.6.4.1



^ permalink raw reply related	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
  2012-07-20 12:42   ` Zhao Chenhui
@ 2012-07-31 14:24     ` Kumar Gala
  -1 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:24 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: scottwood, linuxppc-dev, linux-kernel


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> In the case of cpu hotplug, the cpu_state should be set to =
CPU_UP_PREPARE when kicking cpu.
> Otherwise, the cpu_state is always CPU_DEAD after calling =
generic_set_cpu_dead(), which
> makes the delay in generic_cpu_die() not happen.
>=20
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> ---
> arch/powerpc/include/asm/smp.h |    1 +
> arch/powerpc/kernel/smp.c      |   12 +++++++++++-
> 2 files changed, 12 insertions(+), 1 deletions(-)

applied to next

- k=

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
@ 2012-07-31 14:24     ` Kumar Gala
  0 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:24 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: linuxppc-dev, scottwood, linux-kernel, leoli


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> In the case of cpu hotplug, the cpu_state should be set to CPU_UP_PREPARE when kicking cpu.
> Otherwise, the cpu_state is always CPU_DEAD after calling generic_set_cpu_dead(), which
> makes the delay in generic_cpu_die() not happen.
> 
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> ---
> arch/powerpc/include/asm/smp.h |    1 +
> arch/powerpc/kernel/smp.c      |   12 +++++++++++-
> 2 files changed, 12 insertions(+), 1 deletions(-)

applied to next

- k

^ permalink raw reply	[flat|nested] 39+ messages in thread

* [PATCH v8 3/7] powerpc/85xx: implement hardware timebase sync
  2012-07-20 12:42 ` Zhao Chenhui
@ 2012-07-20 12:42   ` Zhao Chenhui
  -1 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel

Do hardware timebase sync. Firstly, stop all timebases, and transfer
the timebase value of the boot core to the other core. Finally,
start all timebases.

Only apply to dual-core chips, such as MPC8572, P2020, etc.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
---
 arch/powerpc/include/asm/fsl_guts.h |    2 +
 arch/powerpc/platforms/85xx/smp.c   |   82 +++++++++++++++++++++++++++++++++++
 2 files changed, 84 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h
index aa4c488..dd5ba2c 100644
--- a/arch/powerpc/include/asm/fsl_guts.h
+++ b/arch/powerpc/include/asm/fsl_guts.h
@@ -48,6 +48,8 @@ struct ccsr_guts {
         __be32  dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
         u8	res06c[0x70 - 0x6c];
 	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
+#define CCSR_GUTS_DEVDISR_TB1	0x00001000
+#define CCSR_GUTS_DEVDISR_TB0	0x00004000
 	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
 	u8	res078[0x7c - 0x78];
 	__be32  pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 4827709..7ed52a6 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -25,6 +25,7 @@
 #include <asm/mpic.h>
 #include <asm/cacheflush.h>
 #include <asm/dbell.h>
+#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/mpic.h>
@@ -41,6 +42,64 @@ struct epapr_spin_table {
 	u32	pir;
 };
 
+static struct ccsr_guts __iomem *guts;
+static u64 timebase;
+static int tb_req;
+static int tb_valid;
+
+static void mpc85xx_timebase_freeze(int freeze)
+{
+	uint32_t mask;
+
+	mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1;
+	if (freeze)
+		setbits32(&guts->devdisr, mask);
+	else
+		clrbits32(&guts->devdisr, mask);
+
+	in_be32(&guts->devdisr);
+}
+
+static void mpc85xx_give_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	while (!tb_req)
+		barrier();
+	tb_req = 0;
+
+	mpc85xx_timebase_freeze(1);
+	timebase = get_tb();
+	mb();
+	tb_valid = 1;
+
+	while (tb_valid)
+		barrier();
+
+	mpc85xx_timebase_freeze(0);
+
+	local_irq_restore(flags);
+}
+
+static void mpc85xx_take_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	tb_req = 1;
+	while (!tb_valid)
+		barrier();
+
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	isync();
+	tb_valid = 0;
+
+	local_irq_restore(flags);
+}
+
 static int __init
 smp_85xx_kick_cpu(int nr)
 {
@@ -228,6 +287,16 @@ smp_85xx_setup_cpu(int cpu_nr)
 		doorbell_setup_this_cpu();
 }
 
+static const struct of_device_id mpc85xx_smp_guts_ids[] = {
+	{ .compatible = "fsl,mpc8572-guts", },
+	{ .compatible = "fsl,p1020-guts", },
+	{ .compatible = "fsl,p1021-guts", },
+	{ .compatible = "fsl,p1022-guts", },
+	{ .compatible = "fsl,p1023-guts", },
+	{ .compatible = "fsl,p2020-guts", },
+	{},
+};
+
 void __init mpc85xx_smp_init(void)
 {
 	struct device_node *np;
@@ -249,6 +318,19 @@ void __init mpc85xx_smp_init(void)
 		smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
 	}
 
+	np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
+	if (np) {
+		guts = of_iomap(np, 0);
+		of_node_put(np);
+		if (!guts) {
+			pr_err("%s: Could not map guts node address\n",
+								__func__);
+			return;
+		}
+		smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
+		smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
+	}
+
 	smp_ops = &smp_85xx_ops;
 
 #ifdef CONFIG_KEXEC
-- 
1.6.4.1

^ permalink raw reply related	[flat|nested] 39+ messages in thread

* [PATCH v8 3/7] powerpc/85xx: implement hardware timebase sync
@ 2012-07-20 12:42   ` Zhao Chenhui
  0 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel, leoli

Do hardware timebase sync. Firstly, stop all timebases, and transfer
the timebase value of the boot core to the other core. Finally,
start all timebases.

Only apply to dual-core chips, such as MPC8572, P2020, etc.

Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
---
 arch/powerpc/include/asm/fsl_guts.h |    2 +
 arch/powerpc/platforms/85xx/smp.c   |   82 +++++++++++++++++++++++++++++++++++
 2 files changed, 84 insertions(+), 0 deletions(-)

diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h
index aa4c488..dd5ba2c 100644
--- a/arch/powerpc/include/asm/fsl_guts.h
+++ b/arch/powerpc/include/asm/fsl_guts.h
@@ -48,6 +48,8 @@ struct ccsr_guts {
         __be32  dmuxcr;		/* 0x.0068 - DMA Mux Control Register */
         u8	res06c[0x70 - 0x6c];
 	__be32	devdisr;	/* 0x.0070 - Device Disable Control */
+#define CCSR_GUTS_DEVDISR_TB1	0x00001000
+#define CCSR_GUTS_DEVDISR_TB0	0x00004000
 	__be32	devdisr2;	/* 0x.0074 - Device Disable Control 2 */
 	u8	res078[0x7c - 0x78];
 	__be32  pmjcr;		/* 0x.007c - 4 Power Management Jog Control Register */
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 4827709..7ed52a6 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -25,6 +25,7 @@
 #include <asm/mpic.h>
 #include <asm/cacheflush.h>
 #include <asm/dbell.h>
+#include <asm/fsl_guts.h>
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/mpic.h>
@@ -41,6 +42,64 @@ struct epapr_spin_table {
 	u32	pir;
 };
 
+static struct ccsr_guts __iomem *guts;
+static u64 timebase;
+static int tb_req;
+static int tb_valid;
+
+static void mpc85xx_timebase_freeze(int freeze)
+{
+	uint32_t mask;
+
+	mask = CCSR_GUTS_DEVDISR_TB0 | CCSR_GUTS_DEVDISR_TB1;
+	if (freeze)
+		setbits32(&guts->devdisr, mask);
+	else
+		clrbits32(&guts->devdisr, mask);
+
+	in_be32(&guts->devdisr);
+}
+
+static void mpc85xx_give_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	while (!tb_req)
+		barrier();
+	tb_req = 0;
+
+	mpc85xx_timebase_freeze(1);
+	timebase = get_tb();
+	mb();
+	tb_valid = 1;
+
+	while (tb_valid)
+		barrier();
+
+	mpc85xx_timebase_freeze(0);
+
+	local_irq_restore(flags);
+}
+
+static void mpc85xx_take_timebase(void)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	tb_req = 1;
+	while (!tb_valid)
+		barrier();
+
+	set_tb(timebase >> 32, timebase & 0xffffffff);
+	isync();
+	tb_valid = 0;
+
+	local_irq_restore(flags);
+}
+
 static int __init
 smp_85xx_kick_cpu(int nr)
 {
@@ -228,6 +287,16 @@ smp_85xx_setup_cpu(int cpu_nr)
 		doorbell_setup_this_cpu();
 }
 
+static const struct of_device_id mpc85xx_smp_guts_ids[] = {
+	{ .compatible = "fsl,mpc8572-guts", },
+	{ .compatible = "fsl,p1020-guts", },
+	{ .compatible = "fsl,p1021-guts", },
+	{ .compatible = "fsl,p1022-guts", },
+	{ .compatible = "fsl,p1023-guts", },
+	{ .compatible = "fsl,p2020-guts", },
+	{},
+};
+
 void __init mpc85xx_smp_init(void)
 {
 	struct device_node *np;
@@ -249,6 +318,19 @@ void __init mpc85xx_smp_init(void)
 		smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
 	}
 
+	np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);
+	if (np) {
+		guts = of_iomap(np, 0);
+		of_node_put(np);
+		if (!guts) {
+			pr_err("%s: Could not map guts node address\n",
+								__func__);
+			return;
+		}
+		smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
+		smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
+	}
+
 	smp_ops = &smp_85xx_ops;
 
 #ifdef CONFIG_KEXEC
-- 
1.6.4.1



^ permalink raw reply related	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 3/7] powerpc/85xx: implement hardware timebase sync
  2012-07-20 12:42   ` Zhao Chenhui
@ 2012-07-31 14:24     ` Kumar Gala
  -1 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:24 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: scottwood, linuxppc-dev, linux-kernel


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> Do hardware timebase sync. Firstly, stop all timebases, and transfer
> the timebase value of the boot core to the other core. Finally,
> start all timebases.
>=20
> Only apply to dual-core chips, such as MPC8572, P2020, etc.
>=20
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> ---
> arch/powerpc/include/asm/fsl_guts.h |    2 +
> arch/powerpc/platforms/85xx/smp.c   |   82 =
+++++++++++++++++++++++++++++++++++
> 2 files changed, 84 insertions(+), 0 deletions(-)

applied to next

- k=

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 3/7] powerpc/85xx: implement hardware timebase sync
@ 2012-07-31 14:24     ` Kumar Gala
  0 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:24 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: linuxppc-dev, scottwood, linux-kernel, leoli


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> Do hardware timebase sync. Firstly, stop all timebases, and transfer
> the timebase value of the boot core to the other core. Finally,
> start all timebases.
> 
> Only apply to dual-core chips, such as MPC8572, P2020, etc.
> 
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> ---
> arch/powerpc/include/asm/fsl_guts.h |    2 +
> arch/powerpc/platforms/85xx/smp.c   |   82 +++++++++++++++++++++++++++++++++++
> 2 files changed, 84 insertions(+), 0 deletions(-)

applied to next

- k

^ permalink raw reply	[flat|nested] 39+ messages in thread

* [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
  2012-07-20 12:42 ` Zhao Chenhui
@ 2012-07-20 12:42   ` Zhao Chenhui
  -1 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel

Add support to disable and re-enable individual cores at runtime
on MPC85xx/QorIQ SMP machines. Currently support e500v1/e500v2 core.

MPC85xx machines use ePAPR spin-table in boot page for CPU kick-off.
This patch uses the boot page from bootloader to boot core at runtime.
It supports 32-bit and 36-bit physical address.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
 arch/powerpc/Kconfig                  |    6 ++-
 arch/powerpc/include/asm/cacheflush.h |    2 +
 arch/powerpc/include/asm/smp.h        |    1 +
 arch/powerpc/kernel/head_fsl_booke.S  |   28 ++++++++++
 arch/powerpc/platforms/85xx/smp.c     |   90 ++++++++++++++++++++++++++++-----
 5 files changed, 112 insertions(+), 15 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9a5d3cd..a7c6914 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -213,7 +213,8 @@ config ARCH_HIBERNATION_POSSIBLE
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
-		   (PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x
+		   (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \
+		   || 44x || 40x
 
 config PPC_DCR_NATIVE
 	bool
@@ -323,7 +324,8 @@ config SWIOTLB
 
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC || PPC_POWERNV)
+	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || \
+	PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
 	---help---
 	  Say Y here to be able to disable and re-enable individual
 	  CPUs at runtime on SMP machines.
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index ab9e402..b843e35 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -30,6 +30,8 @@ extern void flush_dcache_page(struct page *page);
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
+extern void __flush_disable_L1(void);
+
 extern void __flush_icache_range(unsigned long, unsigned long);
 static inline void flush_icache_range(unsigned long start, unsigned long stop)
 {
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index ce8e2bd..e807e9d 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -191,6 +191,7 @@ extern unsigned long __secondary_hold_spinloop;
 extern unsigned long __secondary_hold_acknowledge;
 extern char __secondary_hold;
 
+extern void __early_start(void);
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 0f59863..b221541 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -1043,6 +1043,34 @@ _GLOBAL(flush_dcache_L1)
 
 	blr
 
+/* Flush L1 d-cache, invalidate and disable d-cache and i-cache */
+_GLOBAL(__flush_disable_L1)
+	mflr	r10
+	bl	flush_dcache_L1	/* Flush L1 d-cache */
+	mtlr	r10
+
+	mfspr	r4, SPRN_L1CSR0	/* Invalidate and disable d-cache */
+	li	r5, 2
+	rlwimi	r4, r5, 0, 3
+
+	msync
+	isync
+	mtspr	SPRN_L1CSR0, r4
+	isync
+
+1:	mfspr	r4, SPRN_L1CSR0	/* Wait for the invalidate to finish */
+	andi.	r4, r4, 2
+	bne	1b
+
+	mfspr	r4, SPRN_L1CSR1	/* Invalidate and disable i-cache */
+	li	r5, 2
+	rlwimi	r4, r5, 0, 3
+
+	mtspr	SPRN_L1CSR1, r4
+	isync
+
+	blr
+
 #ifdef CONFIG_SMP
 /* When we get here, r24 needs to hold the CPU # */
 	.globl __secondary_start
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 7ed52a6..6fcfa12 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -31,8 +31,6 @@
 #include <sysdev/mpic.h>
 #include "smp.h"
 
-extern void __early_start(void);
-
 struct epapr_spin_table {
 	u32	addr_h;
 	u32	addr_l;
@@ -100,15 +98,45 @@ static void mpc85xx_take_timebase(void)
 	local_irq_restore(flags);
 }
 
-static int __init
-smp_85xx_kick_cpu(int nr)
+#ifdef CONFIG_HOTPLUG_CPU
+static void __cpuinit smp_85xx_mach_cpu_die(void)
+{
+	unsigned int cpu = smp_processor_id();
+	u32 tmp;
+
+	local_irq_disable();
+	idle_task_exit();
+	generic_set_cpu_dead(cpu);
+	mb();
+
+	mtspr(SPRN_TCR, 0);
+
+	__flush_disable_L1();
+	tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP;
+	mtspr(SPRN_HID0, tmp);
+	isync();
+
+	/* Enter NAP mode. */
+	tmp = mfmsr();
+	tmp |= MSR_WE;
+	mb();
+	mtmsr(tmp);
+	isync();
+
+	while (1)
+		;
+}
+#endif
+
+static int __cpuinit smp_85xx_kick_cpu(int nr)
 {
 	unsigned long flags;
 	const u64 *cpu_rel_addr;
 	__iomem struct epapr_spin_table *spin_table;
 	struct device_node *np;
-	int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
+	int hw_cpu = get_hard_smp_processor_id(nr);
 	int ioremappable;
+	int ret = 0;
 
 	WARN_ON(nr < 0 || nr >= NR_CPUS);
 	WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
@@ -139,9 +167,34 @@ smp_85xx_kick_cpu(int nr)
 		spin_table = phys_to_virt(*cpu_rel_addr);
 
 	local_irq_save(flags);
+#ifdef CONFIG_PPC32
+#ifdef CONFIG_HOTPLUG_CPU
+	/* Corresponding to generic_set_cpu_dead() */
+	generic_set_cpu_up(nr);
+
+	if (system_state == SYSTEM_RUNNING) {
+		out_be32(&spin_table->addr_l, 0);
 
+		/*
+		 * We don't set the BPTR register here since it already points
+		 * to the boot page properly.
+		 */
+		mpic_reset_core(hw_cpu);
+
+		/* wait until core is ready... */
+		if (!spin_event_timeout(in_be32(&spin_table->addr_l) == 1,
+						10000, 100)) {
+			pr_err("%s: timeout waiting for core %d to reset\n",
+							__func__, hw_cpu);
+			ret = -ENOENT;
+			goto out;
+		}
+
+		/*  clear the acknowledge status */
+		__secondary_hold_acknowledge = -1;
+	}
+#endif
 	out_be32(&spin_table->pir, hw_cpu);
-#ifdef CONFIG_PPC32
 	out_be32(&spin_table->addr_l, __pa(__early_start));
 
 	if (!ioremappable)
@@ -149,11 +202,18 @@ smp_85xx_kick_cpu(int nr)
 			(ulong)spin_table + sizeof(struct epapr_spin_table));
 
 	/* Wait a bit for the CPU to ack. */
-	while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
-		mdelay(1);
+	if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu,
+					10000, 100)) {
+		pr_err("%s: timeout waiting for core %d to ack\n",
+						__func__, hw_cpu);
+		ret = -ENOENT;
+		goto out;
+	}
+out:
 #else
 	smp_generic_kick_cpu(nr);
 
+	out_be32(&spin_table->pir, hw_cpu);
 	out_be64((u64 *)(&spin_table->addr_h),
 	  __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
 
@@ -167,13 +227,15 @@ smp_85xx_kick_cpu(int nr)
 	if (ioremappable)
 		iounmap(spin_table);
 
-	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
-
-	return 0;
+	return ret;
 }
 
 struct smp_ops_t smp_85xx_ops = {
 	.kick_cpu = smp_85xx_kick_cpu,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable	= generic_cpu_disable,
+	.cpu_die	= generic_cpu_die,
+#endif
 #ifdef CONFIG_KEXEC
 	.give_timebase	= smp_generic_give_timebase,
 	.take_timebase	= smp_generic_take_timebase,
@@ -277,8 +339,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
 }
 #endif /* CONFIG_KEXEC */
 
-static void __init
-smp_85xx_setup_cpu(int cpu_nr)
+static void __cpuinit smp_85xx_setup_cpu(int cpu_nr)
 {
 	if (smp_85xx_ops.probe == smp_mpic_probe)
 		mpic_setup_this_cpu();
@@ -329,6 +390,9 @@ void __init mpc85xx_smp_init(void)
 		}
 		smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
 		smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
+#ifdef CONFIG_HOTPLUG_CPU
+		ppc_md.cpu_die = smp_85xx_mach_cpu_die;
+#endif
 	}
 
 	smp_ops = &smp_85xx_ops;
-- 
1.6.4.1

^ permalink raw reply related	[flat|nested] 39+ messages in thread

* [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
@ 2012-07-20 12:42   ` Zhao Chenhui
  0 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel, leoli

Add support to disable and re-enable individual cores at runtime
on MPC85xx/QorIQ SMP machines. Currently support e500v1/e500v2 core.

MPC85xx machines use ePAPR spin-table in boot page for CPU kick-off.
This patch uses the boot page from bootloader to boot core at runtime.
It supports 32-bit and 36-bit physical address.

Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
 arch/powerpc/Kconfig                  |    6 ++-
 arch/powerpc/include/asm/cacheflush.h |    2 +
 arch/powerpc/include/asm/smp.h        |    1 +
 arch/powerpc/kernel/head_fsl_booke.S  |   28 ++++++++++
 arch/powerpc/platforms/85xx/smp.c     |   90 ++++++++++++++++++++++++++++-----
 5 files changed, 112 insertions(+), 15 deletions(-)

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 9a5d3cd..a7c6914 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -213,7 +213,8 @@ config ARCH_HIBERNATION_POSSIBLE
 config ARCH_SUSPEND_POSSIBLE
 	def_bool y
 	depends on ADB_PMU || PPC_EFIKA || PPC_LITE5200 || PPC_83xx || \
-		   (PPC_85xx && !SMP) || PPC_86xx || PPC_PSERIES || 44x || 40x
+		   (PPC_85xx && !PPC_E500MC) || PPC_86xx || PPC_PSERIES \
+		   || 44x || 40x
 
 config PPC_DCR_NATIVE
 	bool
@@ -323,7 +324,8 @@ config SWIOTLB
 
 config HOTPLUG_CPU
 	bool "Support for enabling/disabling CPUs"
-	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC || PPC_POWERNV)
+	depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || \
+	PPC_PMAC || PPC_POWERNV || (PPC_85xx && !PPC_E500MC))
 	---help---
 	  Say Y here to be able to disable and re-enable individual
 	  CPUs at runtime on SMP machines.
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index ab9e402..b843e35 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -30,6 +30,8 @@ extern void flush_dcache_page(struct page *page);
 #define flush_dcache_mmap_lock(mapping)		do { } while (0)
 #define flush_dcache_mmap_unlock(mapping)	do { } while (0)
 
+extern void __flush_disable_L1(void);
+
 extern void __flush_icache_range(unsigned long, unsigned long);
 static inline void flush_icache_range(unsigned long start, unsigned long stop)
 {
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index ce8e2bd..e807e9d 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -191,6 +191,7 @@ extern unsigned long __secondary_hold_spinloop;
 extern unsigned long __secondary_hold_acknowledge;
 extern char __secondary_hold;
 
+extern void __early_start(void);
 #endif /* __ASSEMBLY__ */
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 0f59863..b221541 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -1043,6 +1043,34 @@ _GLOBAL(flush_dcache_L1)
 
 	blr
 
+/* Flush L1 d-cache, invalidate and disable d-cache and i-cache */
+_GLOBAL(__flush_disable_L1)
+	mflr	r10
+	bl	flush_dcache_L1	/* Flush L1 d-cache */
+	mtlr	r10
+
+	mfspr	r4, SPRN_L1CSR0	/* Invalidate and disable d-cache */
+	li	r5, 2
+	rlwimi	r4, r5, 0, 3
+
+	msync
+	isync
+	mtspr	SPRN_L1CSR0, r4
+	isync
+
+1:	mfspr	r4, SPRN_L1CSR0	/* Wait for the invalidate to finish */
+	andi.	r4, r4, 2
+	bne	1b
+
+	mfspr	r4, SPRN_L1CSR1	/* Invalidate and disable i-cache */
+	li	r5, 2
+	rlwimi	r4, r5, 0, 3
+
+	mtspr	SPRN_L1CSR1, r4
+	isync
+
+	blr
+
 #ifdef CONFIG_SMP
 /* When we get here, r24 needs to hold the CPU # */
 	.globl __secondary_start
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index 7ed52a6..6fcfa12 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -31,8 +31,6 @@
 #include <sysdev/mpic.h>
 #include "smp.h"
 
-extern void __early_start(void);
-
 struct epapr_spin_table {
 	u32	addr_h;
 	u32	addr_l;
@@ -100,15 +98,45 @@ static void mpc85xx_take_timebase(void)
 	local_irq_restore(flags);
 }
 
-static int __init
-smp_85xx_kick_cpu(int nr)
+#ifdef CONFIG_HOTPLUG_CPU
+static void __cpuinit smp_85xx_mach_cpu_die(void)
+{
+	unsigned int cpu = smp_processor_id();
+	u32 tmp;
+
+	local_irq_disable();
+	idle_task_exit();
+	generic_set_cpu_dead(cpu);
+	mb();
+
+	mtspr(SPRN_TCR, 0);
+
+	__flush_disable_L1();
+	tmp = (mfspr(SPRN_HID0) & ~(HID0_DOZE|HID0_SLEEP)) | HID0_NAP;
+	mtspr(SPRN_HID0, tmp);
+	isync();
+
+	/* Enter NAP mode. */
+	tmp = mfmsr();
+	tmp |= MSR_WE;
+	mb();
+	mtmsr(tmp);
+	isync();
+
+	while (1)
+		;
+}
+#endif
+
+static int __cpuinit smp_85xx_kick_cpu(int nr)
 {
 	unsigned long flags;
 	const u64 *cpu_rel_addr;
 	__iomem struct epapr_spin_table *spin_table;
 	struct device_node *np;
-	int n = 0, hw_cpu = get_hard_smp_processor_id(nr);
+	int hw_cpu = get_hard_smp_processor_id(nr);
 	int ioremappable;
+	int ret = 0;
 
 	WARN_ON(nr < 0 || nr >= NR_CPUS);
 	WARN_ON(hw_cpu < 0 || hw_cpu >= NR_CPUS);
@@ -139,9 +167,34 @@ smp_85xx_kick_cpu(int nr)
 		spin_table = phys_to_virt(*cpu_rel_addr);
 
 	local_irq_save(flags);
+#ifdef CONFIG_PPC32
+#ifdef CONFIG_HOTPLUG_CPU
+	/* Corresponding to generic_set_cpu_dead() */
+	generic_set_cpu_up(nr);
+
+	if (system_state == SYSTEM_RUNNING) {
+		out_be32(&spin_table->addr_l, 0);
 
+		/*
+		 * We don't set the BPTR register here since it already points
+		 * to the boot page properly.
+		 */
+		mpic_reset_core(hw_cpu);
+
+		/* wait until core is ready... */
+		if (!spin_event_timeout(in_be32(&spin_table->addr_l) == 1,
+						10000, 100)) {
+			pr_err("%s: timeout waiting for core %d to reset\n",
+							__func__, hw_cpu);
+			ret = -ENOENT;
+			goto out;
+		}
+
+		/*  clear the acknowledge status */
+		__secondary_hold_acknowledge = -1;
+	}
+#endif
 	out_be32(&spin_table->pir, hw_cpu);
-#ifdef CONFIG_PPC32
 	out_be32(&spin_table->addr_l, __pa(__early_start));
 
 	if (!ioremappable)
@@ -149,11 +202,18 @@ smp_85xx_kick_cpu(int nr)
 			(ulong)spin_table + sizeof(struct epapr_spin_table));
 
 	/* Wait a bit for the CPU to ack. */
-	while ((__secondary_hold_acknowledge != hw_cpu) && (++n < 1000))
-		mdelay(1);
+	if (!spin_event_timeout(__secondary_hold_acknowledge == hw_cpu,
+					10000, 100)) {
+		pr_err("%s: timeout waiting for core %d to ack\n",
+						__func__, hw_cpu);
+		ret = -ENOENT;
+		goto out;
+	}
+out:
 #else
 	smp_generic_kick_cpu(nr);
 
+	out_be32(&spin_table->pir, hw_cpu);
 	out_be64((u64 *)(&spin_table->addr_h),
 	  __pa((u64)*((unsigned long long *)generic_secondary_smp_init)));
 
@@ -167,13 +227,15 @@ smp_85xx_kick_cpu(int nr)
 	if (ioremappable)
 		iounmap(spin_table);
 
-	pr_debug("waited %d msecs for CPU #%d.\n", n, nr);
-
-	return 0;
+	return ret;
 }
 
 struct smp_ops_t smp_85xx_ops = {
 	.kick_cpu = smp_85xx_kick_cpu,
+#ifdef CONFIG_HOTPLUG_CPU
+	.cpu_disable	= generic_cpu_disable,
+	.cpu_die	= generic_cpu_die,
+#endif
 #ifdef CONFIG_KEXEC
 	.give_timebase	= smp_generic_give_timebase,
 	.take_timebase	= smp_generic_take_timebase,
@@ -277,8 +339,7 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
 }
 #endif /* CONFIG_KEXEC */
 
-static void __init
-smp_85xx_setup_cpu(int cpu_nr)
+static void __cpuinit smp_85xx_setup_cpu(int cpu_nr)
 {
 	if (smp_85xx_ops.probe == smp_mpic_probe)
 		mpic_setup_this_cpu();
@@ -329,6 +390,9 @@ void __init mpc85xx_smp_init(void)
 		}
 		smp_85xx_ops.give_timebase = mpc85xx_give_timebase;
 		smp_85xx_ops.take_timebase = mpc85xx_take_timebase;
+#ifdef CONFIG_HOTPLUG_CPU
+		ppc_md.cpu_die = smp_85xx_mach_cpu_die;
+#endif
 	}
 
 	smp_ops = &smp_85xx_ops;
-- 
1.6.4.1



^ permalink raw reply related	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
  2012-07-20 12:42   ` Zhao Chenhui
@ 2012-07-31 14:24     ` Kumar Gala
  -1 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:24 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: scottwood, linuxppc-dev, linux-kernel


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> Add support to disable and re-enable individual cores at runtime
> on MPC85xx/QorIQ SMP machines. Currently support e500v1/e500v2 core.
>=20
> MPC85xx machines use ePAPR spin-table in boot page for CPU kick-off.
> This patch uses the boot page from bootloader to boot core at runtime.
> It supports 32-bit and 36-bit physical address.
>=20
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Jin Qing <b24347@freescale.com>
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> ---
> arch/powerpc/Kconfig                  |    6 ++-
> arch/powerpc/include/asm/cacheflush.h |    2 +
> arch/powerpc/include/asm/smp.h        |    1 +
> arch/powerpc/kernel/head_fsl_booke.S  |   28 ++++++++++
> arch/powerpc/platforms/85xx/smp.c     |   90 =
++++++++++++++++++++++++++++-----
> 5 files changed, 112 insertions(+), 15 deletions(-)

applied to next

- k=

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
@ 2012-07-31 14:24     ` Kumar Gala
  0 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:24 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: linuxppc-dev, scottwood, linux-kernel, leoli


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> Add support to disable and re-enable individual cores at runtime
> on MPC85xx/QorIQ SMP machines. Currently support e500v1/e500v2 core.
> 
> MPC85xx machines use ePAPR spin-table in boot page for CPU kick-off.
> This patch uses the boot page from bootloader to boot core at runtime.
> It supports 32-bit and 36-bit physical address.
> 
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Jin Qing <b24347@freescale.com>
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> ---
> arch/powerpc/Kconfig                  |    6 ++-
> arch/powerpc/include/asm/cacheflush.h |    2 +
> arch/powerpc/include/asm/smp.h        |    1 +
> arch/powerpc/kernel/head_fsl_booke.S  |   28 ++++++++++
> arch/powerpc/platforms/85xx/smp.c     |   90 ++++++++++++++++++++++++++++-----
> 5 files changed, 112 insertions(+), 15 deletions(-)

applied to next

- k

^ permalink raw reply	[flat|nested] 39+ messages in thread

* [PATCH v8 5/7] powerpc/85xx: add sleep and deep sleep support
  2012-07-20 12:42 ` Zhao Chenhui
@ 2012-07-20 12:42   ` Zhao Chenhui
  -1 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel

In sleep PM mode, the clocks of e500 core and unused IP blocks is
turned off. IP blocks which are allowed to wake up the processor
are still running.

Some Freescale chips like MPC8536 and P1022 has deep sleep PM mode
in addtion to the sleep PM mode.

While in deep sleep PM mode, additionally, the power supply is
removed from e500 core and most IP blocks. Only the blocks needed
to wake up the chip out of deep sleep are ON.

This patch supports 32-bit and 36-bit address space.

The sleep mode is equal to the Standby state in Linux. The deep sleep
mode is equal to the Suspend-to-RAM state of Linux Power Management.

Command to enter sleep mode.
  echo standby > /sys/power/state
Command to enter deep sleep mode.
  echo mem > /sys/power/state

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
 arch/powerpc/Kconfig                  |    2 +-
 arch/powerpc/include/asm/cacheflush.h |    2 +
 arch/powerpc/kernel/Makefile          |    3 +
 arch/powerpc/kernel/l2cache_85xx.S    |   56 +++
 arch/powerpc/platforms/85xx/Makefile  |    2 +-
 arch/powerpc/platforms/85xx/sleep.S   |  621 +++++++++++++++++++++++++++++++++
 arch/powerpc/sysdev/fsl_pmc.c         |   98 +++++-
 arch/powerpc/sysdev/fsl_soc.h         |    5 +
 8 files changed, 769 insertions(+), 20 deletions(-)
 create mode 100644 arch/powerpc/kernel/l2cache_85xx.S
 create mode 100644 arch/powerpc/platforms/85xx/sleep.S

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a7c6914..9d6de82 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -665,7 +665,7 @@ config FSL_PCI
 config FSL_PMC
 	bool
 	default y
-	depends on SUSPEND && (PPC_85xx || PPC_86xx)
+	depends on SUSPEND && (PPC_85xx || PPC_86xx) && !PPC_E500MC
 	help
 	  Freescale MPC85xx/MPC86xx power management controller support
 	  (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index b843e35..6c5f1c2 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -58,6 +58,8 @@ extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
 extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
 #endif
 
+extern void flush_dcache_L1(void);
+
 #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
 	do { \
 		memcpy(dst, src, len); \
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 83afacd..0ddef24 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -64,6 +64,9 @@ obj-$(CONFIG_FA_DUMP)		+= fadump.o
 ifeq ($(CONFIG_PPC32),y)
 obj-$(CONFIG_E500)		+= idle_e500.o
 endif
+ifneq ($(CONFIG_PPC_E500MC),y)
+obj-$(CONFIG_PPC_85xx)		+= l2cache_85xx.o
+endif
 obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
 obj-$(CONFIG_TAU)		+= tau_6xx.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o
diff --git a/arch/powerpc/kernel/l2cache_85xx.S b/arch/powerpc/kernel/l2cache_85xx.S
new file mode 100644
index 0000000..e920d69
--- /dev/null
+++ b/arch/powerpc/kernel/l2cache_85xx.S
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2009-2012 Freescale Semiconductor, Inc. All rights reserved.
+ *	Scott Wood <scottwood@freescale.com>
+ *	Dave Liu <daveliu@freescale.com>
+ * implement the L2 cache operations of e500 based L2 controller
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/reg.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+#define L2CTL_L2E	0x80000000
+#define L2CTL_L2I	0x40000000
+
+	.section .text
+
+	/* r3 = virtual address of L2 controller, WIMG = 01xx */
+_GLOBAL(flush_disable_L2)
+	/* It's a write-through cache, so only invalidation is needed. */
+	mbar
+	isync
+	lwz	r4, 0(r3)
+	li	r5, 1
+	rlwimi	r4, r5, 30, L2CTL_L2E | L2CTL_L2I
+	stw	r4, 0(r3)
+
+	/* Wait for the invalidate to finish */
+1:	lwz	r4, 0(r3)
+	andis.	r4, r4, L2CTL_L2I@h
+	bne	1b
+	mbar
+
+	blr
+
+	/* r3 = virtual address of L2 controller, WIMG = 01xx */
+_GLOBAL(invalidate_enable_L2)
+	mbar
+	isync
+	lwz	r4, 0(r3)
+	li	r5, 3
+	rlwimi	r4, r5, 30, L2CTL_L2E | L2CTL_L2I
+	stw	r4, 0(r3)
+
+	/* Wait for the invalidate to finish */
+1:	lwz	r4, 0(r3)
+	andis.	r4, r4, L2CTL_L2I@h
+	bne	1b
+	mbar
+
+	blr
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 3dfe811..405ab79 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -3,7 +3,7 @@
 #
 obj-$(CONFIG_SMP) += smp.o
 
-obj-y += common.o
+obj-y += common.o sleep.o
 
 obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
diff --git a/arch/powerpc/platforms/85xx/sleep.S b/arch/powerpc/platforms/85xx/sleep.S
new file mode 100644
index 0000000..e6dfede
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/sleep.S
@@ -0,0 +1,621 @@
+/*
+ * Enter and leave deep sleep/sleep state on MPC85xx
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (C) 2006-2012 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+#include <asm/mmu.h>
+
+#define CCSR_ADDR		0xf0000000
+
+#define L2C_OFFSET		0x20000	/* L2 Cache Controller offset */
+
+#define BPTR_OFFSET		0x20 /* Boot Page Translation Register */
+#define BPTR_EN			0x80000000
+
+#define PMRCCR_OFFSET		0xe0084
+#define PMRCCR_VRCNT_PRE_MASK	0x1f000000
+#define PMRCCR_VRCNT_MASK	0x00ff0000
+
+#define POWMGTSCR_OFFSET	0xe0080
+#define POWMGTSCR_DPSLP		0x00100000 /* deep sleep mode */
+
+#define SS_TB		0x00
+#define SS_HID		0x08 /* 2 HIDs */
+#define SS_IAC		0x10 /* 2 IACs */
+#define SS_DAC		0x18 /* 2 DACs */
+#define SS_DBCR		0x20 /* 3 DBCRs */
+#define SS_PID		0x2c /* 3 PIDs */
+#define SS_SPRG		0x38 /* 8 SPRGs */
+#define SS_IVOR		0x58 /* 20 interrupt vectors */
+#define SS_TCR		0xa8
+#define SS_BUCSR	0xac
+#define SS_L1CSR	0xb0 /* 2 L1CSRs */
+#define SS_MSR		0xb8
+#define SS_USPRG	0xbc
+#define SS_GPREG	0xc0 /* r12-r31 */
+#define SS_LR		0x110
+#define SS_CR		0x114
+#define SS_SP		0x118
+#define SS_CURRENT	0x11c
+#define SS_IVPR		0x120
+#define SS_BPTR		0x124
+
+#define STATE_SAVE_SIZE 0x128
+
+	.section .data
+	.align	5
+mpc85xx_sleep_save_area:
+	.space	STATE_SAVE_SIZE
+ccsrbase_low:
+	.long	0
+ccsrbase_high:
+	.long	0
+powmgtreq:
+	.long	0
+
+	.section .text
+	.align	12
+
+	/*
+	 * r3 = high word of physical address of CCSR
+	 * r4 = low word of physical address of CCSR
+	 * r5 = JOG or deep sleep request
+	 *      JOG-0x00200000, deep sleep-0x00100000
+	 */
+_GLOBAL(mpc85xx_enter_deep_sleep)
+	lis	r6, ccsrbase_low@ha
+	stw	r4, ccsrbase_low@l(r6)
+	lis	r6, ccsrbase_high@ha
+	stw	r3, ccsrbase_high@l(r6)
+
+	lis	r6, powmgtreq@ha
+	stw	r5, powmgtreq@l(r6)
+
+	lis	r10, mpc85xx_sleep_save_area@h
+	ori	r10, r10, mpc85xx_sleep_save_area@l
+
+	mfspr	r5, SPRN_HID0
+	mfspr	r6, SPRN_HID1
+
+	stw	r5, SS_HID+0(r10)
+	stw	r6, SS_HID+4(r10)
+
+	mfspr	r4, SPRN_IAC1
+	mfspr	r5, SPRN_IAC2
+	mfspr	r6, SPRN_DAC1
+	mfspr	r7, SPRN_DAC2
+
+	stw	r4, SS_IAC+0(r10)
+	stw	r5, SS_IAC+4(r10)
+	stw	r6, SS_DAC+0(r10)
+	stw	r7, SS_DAC+4(r10)
+
+	mfspr	r4, SPRN_DBCR0
+	mfspr	r5, SPRN_DBCR1
+	mfspr	r6, SPRN_DBCR2
+
+	stw	r4, SS_DBCR+0(r10)
+	stw	r5, SS_DBCR+4(r10)
+	stw	r6, SS_DBCR+8(r10)
+
+	mfspr	r4, SPRN_PID0
+	mfspr	r5, SPRN_PID1
+	mfspr	r6, SPRN_PID2
+
+	stw	r4, SS_PID+0(r10)
+	stw	r5, SS_PID+4(r10)
+	stw	r6, SS_PID+8(r10)
+
+	mfspr	r4, SPRN_SPRG0
+	mfspr	r5, SPRN_SPRG1
+	mfspr	r6, SPRN_SPRG2
+	mfspr	r7, SPRN_SPRG3
+
+	stw	r4, SS_SPRG+0x00(r10)
+	stw	r5, SS_SPRG+0x04(r10)
+	stw	r6, SS_SPRG+0x08(r10)
+	stw	r7, SS_SPRG+0x0c(r10)
+
+	mfspr	r4, SPRN_SPRG4
+	mfspr	r5, SPRN_SPRG5
+	mfspr	r6, SPRN_SPRG6
+	mfspr	r7, SPRN_SPRG7
+
+	stw	r4, SS_SPRG+0x10(r10)
+	stw	r5, SS_SPRG+0x14(r10)
+	stw	r6, SS_SPRG+0x18(r10)
+	stw	r7, SS_SPRG+0x1c(r10)
+
+	mfspr	r4, SPRN_IVPR
+	stw	r4, SS_IVPR(r10)
+
+	mfspr	r4, SPRN_IVOR0
+	mfspr	r5, SPRN_IVOR1
+	mfspr	r6, SPRN_IVOR2
+	mfspr	r7, SPRN_IVOR3
+
+	stw	r4, SS_IVOR+0x00(r10)
+	stw	r5, SS_IVOR+0x04(r10)
+	stw	r6, SS_IVOR+0x08(r10)
+	stw	r7, SS_IVOR+0x0c(r10)
+
+	mfspr	r4, SPRN_IVOR4
+	mfspr	r5, SPRN_IVOR5
+	mfspr	r6, SPRN_IVOR6
+	mfspr	r7, SPRN_IVOR7
+
+	stw	r4, SS_IVOR+0x10(r10)
+	stw	r5, SS_IVOR+0x14(r10)
+	stw	r6, SS_IVOR+0x18(r10)
+	stw	r7, SS_IVOR+0x1c(r10)
+
+	mfspr	r4, SPRN_IVOR8
+	mfspr	r5, SPRN_IVOR9
+	mfspr	r6, SPRN_IVOR10
+	mfspr	r7, SPRN_IVOR11
+
+	stw	r4, SS_IVOR+0x20(r10)
+	stw	r5, SS_IVOR+0x24(r10)
+	stw	r6, SS_IVOR+0x28(r10)
+	stw	r7, SS_IVOR+0x2c(r10)
+
+	mfspr	r4, SPRN_IVOR12
+	mfspr	r5, SPRN_IVOR13
+	mfspr	r6, SPRN_IVOR14
+	mfspr	r7, SPRN_IVOR15
+
+	stw	r4, SS_IVOR+0x30(r10)
+	stw	r5, SS_IVOR+0x34(r10)
+	stw	r6, SS_IVOR+0x38(r10)
+	stw	r7, SS_IVOR+0x3c(r10)
+
+	mfspr	r4, SPRN_IVOR32
+	mfspr	r5, SPRN_IVOR33
+	mfspr	r6, SPRN_IVOR34
+	mfspr	r7, SPRN_IVOR35
+
+	stw	r4, SS_IVOR+0x40(r10)
+	stw	r5, SS_IVOR+0x44(r10)
+	stw	r6, SS_IVOR+0x48(r10)
+	stw	r7, SS_IVOR+0x4c(r10)
+
+	mfspr	r4, SPRN_TCR
+	mfspr	r5, SPRN_BUCSR
+	mfspr	r6, SPRN_L1CSR0
+	mfspr	r7, SPRN_L1CSR1
+	mfspr	r8, SPRN_USPRG0
+
+	stw	r4, SS_TCR(r10)
+	stw	r5, SS_BUCSR(r10)
+	stw	r6, SS_L1CSR+0(r10)
+	stw	r7, SS_L1CSR+4(r10)
+	stw	r8, SS_USPRG+0(r10)
+
+	stmw	r12, SS_GPREG(r10)
+
+	mfmsr	r4
+	mflr	r5
+	mfcr	r6
+
+	stw	r4, SS_MSR(r10)
+	stw	r5, SS_LR(r10)
+	stw	r6, SS_CR(r10)
+	stw	r1, SS_SP(r10)
+	stw	r2, SS_CURRENT(r10)
+
+1:	mftbu	r4
+	mftb	r5
+	mftbu	r6
+	cmpw	r4, r6
+	bne	1b
+
+	stw	r4, SS_TB+0(r10)
+	stw	r5, SS_TB+4(r10)
+
+	lis	r5, ccsrbase_low@ha
+	lwz	r4, ccsrbase_low@l(r5)
+	lis	r5, ccsrbase_high@ha
+	lwz	r3, ccsrbase_high@l(r5)
+
+	/* Disable machine checks and critical exceptions */
+	mfmsr	r5
+	rlwinm	r5, r5, 0, ~MSR_CE
+	rlwinm	r5, r5, 0, ~MSR_ME
+	mtmsr	r5
+	isync
+
+	/* Use TLB1[15] to map the CCSR at 0xf0000000 */
+	LOAD_REG_IMMEDIATE(r5, MAS0_TLBSEL(1) | MAS0_ESEL(15))
+	mtspr	SPRN_MAS0, r5
+	LOAD_REG_IMMEDIATE(r5,
+		MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(BOOK3E_PAGESZ_1M))
+	mtspr	SPRN_MAS1, r5
+	LOAD_REG_IMMEDIATE(r5, CCSR_ADDR | MAS2_I | MAS2_M)
+	mtspr	SPRN_MAS2, r5
+	rlwinm	r5, r4, 0, MAS3_RPN
+	ori	r5, r5, (MAS3_SW | MAS3_SR)
+	mtspr	SPRN_MAS3, r5
+	mtspr	SPRN_MAS7, r3
+	isync
+	tlbwe
+	isync
+
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + BPTR_OFFSET)
+	lwz	r4, 0(r3)
+	stw	r4, SS_BPTR(r10)
+
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + L2C_OFFSET)
+	bl	flush_disable_L2
+	bl	__flush_disable_L1
+
+	/* Enable I-cache, so as not to upset the bus
+	 * with our loop.
+	 */
+	mfspr	r4, SPRN_L1CSR1
+	ori	r4, r4, L1CSR1_ICE
+	mtspr	SPRN_L1CSR1, r4
+	isync
+
+	/* Set boot page translation */
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + BPTR_OFFSET)
+	lis	r4, (mpc85xx_deep_resume - PAGE_OFFSET)@h
+	ori	r4, r4, (mpc85xx_deep_resume - PAGE_OFFSET)@l
+	rlwinm	r4, r4, 20, 12, 31
+	oris	r4, r4, BPTR_EN@h
+	stw	r4, 0(r3)
+	lwz	r4, 0(r3) /* read-back to flush write */
+	twi	0, r4, 0
+	isync
+
+	/* Disable the decrementer */
+	mfspr	r4, SPRN_TCR
+	rlwinm	r4, r4, 0, ~TCR_DIE
+	mtspr	SPRN_TCR, r4
+
+	mfspr	r4, SPRN_TSR
+	oris	r4, r4, TSR_DIS@h
+	mtspr	SPRN_TSR, r4
+
+	/* set PMRCCR[VRCNT] to wait power stable for 40ms */
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + PMRCCR_OFFSET)
+	lwz	r4, 0(r3)
+	li	r5, 0x12
+	rlwimi	r4, r5, 0, PMRCCR_VRCNT_PRE_MASK
+	li	r5, 0xa3
+	rlwimi	r4, r5, 0, PMRCCR_VRCNT_MASK
+	stw	r4, 0(r3)
+	lwz	r4, 0(r3)
+
+	/* set deep sleep bit in POWMGTSCR */
+	lis	r3, powmgtreq@ha
+	lwz	r8, powmgtreq@l(r3)
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + POWMGTSCR_OFFSET)
+	lwz	r4, 0(r3)
+	or	r4, r4, r8
+	stw	r4, 0(r3)
+	lwz	r4, 0(r3)		/* read-back to flush write */
+	twi	0, r4, 0
+	isync
+
+	mftb	r5
+1:	/* spin until either we enter deep sleep, or the sleep process is
+	 * aborted due to a pending wakeup event.  Wait some time between
+	 * accesses, so we don't flood the bus and prevent the pmc from
+	 * detecting an idle system.
+	 */
+
+	mftb	r4
+	subf	r7, r5, r4
+	cmpwi	r7, 1000
+	blt	1b
+	mr	r5, r4
+
+	lwz	r6, 0(r3)
+	andis.	r6, r6, POWMGTSCR_DPSLP@h
+	bne	1b
+	b	2f
+
+2:	mfspr	r4, SPRN_PIR
+	andi.	r4, r4, 1
+99:	bne	99b
+
+	/* Establish a temporary 64MB 0->0 mapping in TLB1[1]. */
+	LOAD_REG_IMMEDIATE(r4, MAS0_TLBSEL(1) | MAS0_ESEL(1))
+	mtspr	SPRN_MAS0, r4
+	LOAD_REG_IMMEDIATE(r4,
+		MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(BOOK3E_PAGESZ_64M))
+	mtspr	SPRN_MAS1, r4
+	li	r4, 0
+	mtspr	SPRN_MAS2, r4
+	li	r4, (MAS3_SX | MAS3_SW | MAS3_SR)
+	mtspr	SPRN_MAS3, r4
+	li	r4, 0
+	mtspr	SPRN_MAS7, r4
+	isync
+	tlbwe
+	isync
+
+	lis	r3, (3f - PAGE_OFFSET)@h
+	ori	r3, r3, (3f - PAGE_OFFSET)@l
+	mtctr	r3
+	bctr
+
+	/* Locate the resume vector in the last word of the current page. */
+	. = mpc85xx_enter_deep_sleep + 0xffc
+mpc85xx_deep_resume:
+	b	2b
+
+3:
+	/* Restore the contents of TLB1[0].  It is assumed that it covers
+	 * the currently executing code and the sleep save area, and that
+	 * it does not alias our temporary mapping (which is at virtual zero).
+	 */
+	lis	r3, (TLBCAM - PAGE_OFFSET)@h
+	ori	r3, r3, (TLBCAM - PAGE_OFFSET)@l
+
+	lwz	r4, 0(r3)
+	lwz	r5, 4(r3)
+	lwz	r6, 8(r3)
+	lwz	r7, 12(r3)
+	lwz	r8, 16(r3)
+
+	mtspr	SPRN_MAS0, r4
+	mtspr	SPRN_MAS1, r5
+	mtspr	SPRN_MAS2, r6
+	mtspr	SPRN_MAS3, r7
+	mtspr	SPRN_MAS7, r8
+
+	isync
+	tlbwe
+	isync
+
+	/* Access the ccsrbase address with TLB1[0] */
+	lis	r5, ccsrbase_low@ha
+	lwz	r4, ccsrbase_low@l(r5)
+	lis	r5, ccsrbase_high@ha
+	lwz	r3, ccsrbase_high@l(r5)
+
+	/* Use TLB1[15] to map the CCSR at 0xf0000000 */
+	LOAD_REG_IMMEDIATE(r5, MAS0_TLBSEL(1) | MAS0_ESEL(15))
+	mtspr	SPRN_MAS0, r5
+	LOAD_REG_IMMEDIATE(r5,
+		MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(BOOK3E_PAGESZ_1M))
+	mtspr	SPRN_MAS1, r5
+	LOAD_REG_IMMEDIATE(r5, CCSR_ADDR | MAS2_I | MAS2_M)
+	mtspr	SPRN_MAS2, r5
+	rlwinm	r5, r4, 0, MAS3_RPN
+	ori	r5, r5, (MAS3_SW | MAS3_SR)
+	mtspr	SPRN_MAS3, r5
+	mtspr	SPRN_MAS7, r3
+	isync
+	tlbwe
+	isync
+
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + L2C_OFFSET)
+	bl	invalidate_enable_L2
+
+	/* Access the MEM(r10) with TLB1[0] */
+	lis	r10, mpc85xx_sleep_save_area@h
+	ori	r10, r10, mpc85xx_sleep_save_area@l
+
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + BPTR_OFFSET)
+	lwz	r4, SS_BPTR(r10)
+	stw	r4, 0(r3)		/* restore BPTR */
+
+	/* Program shift running space to PAGE_OFFSET */
+	mfmsr	r3
+	lis	r4, 1f@h
+	ori	r4, r4, 1f@l
+
+	mtsrr1	r3
+	mtsrr0	r4
+	rfi
+
+1:	/* Restore the rest of TLB1, in ascending order so that
+	 * the TLB1[1] gets invalidated first.
+	 *
+	 * XXX: It's better to invalidate the temporary mapping
+	 * TLB1[15] for CCSR before restore any TLB1 entry include 0.
+	 */
+	LOAD_REG_IMMEDIATE(r4, MAS0_TLBSEL(1) | MAS0_ESEL(15))
+	mtspr	SPRN_MAS0, r4
+	lis	r4, 0
+	mtspr	SPRN_MAS1, r4
+	isync
+	tlbwe
+	isync
+
+	lis	r3, (TLBCAM + 5*4 - 4)@h
+	ori	r3, r3, (TLBCAM + 5*4 - 4)@l
+	li	r4, 15
+	mtctr	r4
+
+2:
+	lwz	r5, 4(r3)
+	lwz	r6, 8(r3)
+	lwz	r7, 12(r3)
+	lwz	r8, 16(r3)
+	lwzu	r9, 20(r3)
+
+	mtspr	SPRN_MAS0, r5
+	mtspr	SPRN_MAS1, r6
+	mtspr	SPRN_MAS2, r7
+	mtspr	SPRN_MAS3, r8
+	mtspr	SPRN_MAS7, r9
+
+	isync
+	tlbwe
+	isync
+	bdnz	2b
+
+	lis	r10, mpc85xx_sleep_save_area@h
+	ori	r10, r10, mpc85xx_sleep_save_area@l
+
+	lwz	r5, SS_HID+0(r10)
+	lwz	r6, SS_HID+4(r10)
+
+	isync
+	mtspr	SPRN_HID0, r5
+	isync
+
+	msync
+	mtspr	SPRN_HID1, r6
+	isync
+
+	lwz	r4, SS_IAC+0(r10)
+	lwz	r5, SS_IAC+4(r10)
+	lwz	r6, SS_DAC+0(r10)
+	lwz	r7, SS_DAC+4(r10)
+
+	mtspr	SPRN_IAC1, r4
+	mtspr	SPRN_IAC2, r5
+	mtspr	SPRN_DAC1, r6
+	mtspr	SPRN_DAC2, r7
+
+	lwz	r4, SS_DBCR+0(r10)
+	lwz	r5, SS_DBCR+4(r10)
+	lwz	r6, SS_DBCR+8(r10)
+
+	mtspr	SPRN_DBCR0, r4
+	mtspr	SPRN_DBCR1, r5
+	mtspr	SPRN_DBCR2, r6
+
+	lwz	r4, SS_PID+0(r10)
+	lwz	r5, SS_PID+4(r10)
+	lwz	r6, SS_PID+8(r10)
+
+	mtspr	SPRN_PID0, r4
+	mtspr	SPRN_PID1, r5
+	mtspr	SPRN_PID2, r6
+
+	lwz	r4, SS_SPRG+0x00(r10)
+	lwz	r5, SS_SPRG+0x04(r10)
+	lwz	r6, SS_SPRG+0x08(r10)
+	lwz	r7, SS_SPRG+0x0c(r10)
+
+	mtspr	SPRN_SPRG0, r4
+	mtspr	SPRN_SPRG1, r5
+	mtspr	SPRN_SPRG2, r6
+	mtspr	SPRN_SPRG3, r7
+
+	lwz	r4, SS_SPRG+0x10(r10)
+	lwz	r5, SS_SPRG+0x14(r10)
+	lwz	r6, SS_SPRG+0x18(r10)
+	lwz	r7, SS_SPRG+0x1c(r10)
+
+	mtspr	SPRN_SPRG4, r4
+	mtspr	SPRN_SPRG5, r5
+	mtspr	SPRN_SPRG6, r6
+	mtspr	SPRN_SPRG7, r7
+
+	lwz	r4, SS_IVPR(r10)
+	mtspr	SPRN_IVPR, r4
+
+	lwz	r4, SS_IVOR+0x00(r10)
+	lwz	r5, SS_IVOR+0x04(r10)
+	lwz	r6, SS_IVOR+0x08(r10)
+	lwz	r7, SS_IVOR+0x0c(r10)
+
+	mtspr	SPRN_IVOR0, r4
+	mtspr	SPRN_IVOR1, r5
+	mtspr	SPRN_IVOR2, r6
+	mtspr	SPRN_IVOR3, r7
+
+	lwz	r4, SS_IVOR+0x10(r10)
+	lwz	r5, SS_IVOR+0x14(r10)
+	lwz	r6, SS_IVOR+0x18(r10)
+	lwz	r7, SS_IVOR+0x1c(r10)
+
+	mtspr	SPRN_IVOR4, r4
+	mtspr	SPRN_IVOR5, r5
+	mtspr	SPRN_IVOR6, r6
+	mtspr	SPRN_IVOR7, r7
+
+	lwz	r4, SS_IVOR+0x20(r10)
+	lwz	r5, SS_IVOR+0x24(r10)
+	lwz	r6, SS_IVOR+0x28(r10)
+	lwz	r7, SS_IVOR+0x2c(r10)
+
+	mtspr	SPRN_IVOR8, r4
+	mtspr	SPRN_IVOR9, r5
+	mtspr	SPRN_IVOR10, r6
+	mtspr	SPRN_IVOR11, r7
+
+	lwz	r4, SS_IVOR+0x30(r10)
+	lwz	r5, SS_IVOR+0x34(r10)
+	lwz	r6, SS_IVOR+0x38(r10)
+	lwz	r7, SS_IVOR+0x3c(r10)
+
+	mtspr	SPRN_IVOR12, r4
+	mtspr	SPRN_IVOR13, r5
+	mtspr	SPRN_IVOR14, r6
+	mtspr	SPRN_IVOR15, r7
+
+	lwz	r4, SS_IVOR+0x40(r10)
+	lwz	r5, SS_IVOR+0x44(r10)
+	lwz	r6, SS_IVOR+0x48(r10)
+	lwz	r7, SS_IVOR+0x4c(r10)
+
+	mtspr	SPRN_IVOR32, r4
+	mtspr	SPRN_IVOR33, r5
+	mtspr	SPRN_IVOR34, r6
+	mtspr	SPRN_IVOR35, r7
+
+	lwz	r4, SS_TCR(r10)
+	lwz	r5, SS_BUCSR(r10)
+	lwz	r6, SS_L1CSR+0(r10)
+	lwz	r7, SS_L1CSR+4(r10)
+	lwz	r8, SS_USPRG+0(r10)
+
+	mtspr	SPRN_TCR, r4
+	mtspr	SPRN_BUCSR, r5
+
+	msync
+	isync
+	mtspr	SPRN_L1CSR0, r6
+	isync
+
+	mtspr	SPRN_L1CSR1, r7
+	isync
+
+	mtspr	SPRN_USPRG0, r8
+
+	lmw	r12, SS_GPREG(r10)
+
+	lwz	r1, SS_SP(r10)
+	lwz	r2, SS_CURRENT(r10)
+	lwz	r4, SS_MSR(r10)
+	lwz	r5, SS_LR(r10)
+	lwz	r6, SS_CR(r10)
+
+	msync
+	mtmsr	r4
+	isync
+
+	mtlr	r5
+	mtcr	r6
+
+	li	r4, 0
+	mtspr	SPRN_TBWL, r4
+
+	lwz	r4, SS_TB+0(r10)
+	lwz	r5, SS_TB+4(r10)
+
+	mtspr	SPRN_TBWU, r4
+	mtspr	SPRN_TBWL, r5
+
+	lis	r3, 1
+	mtdec	r3
+
+	blr
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index 592a0f8..45718c5 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -2,6 +2,7 @@
  * Suspend/resume support
  *
  * Copyright 2009  MontaVista Software, Inc.
+ * Copyright 2010-2012 Freescale Semiconductor Inc.
  *
  * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
  *
@@ -19,39 +20,89 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/of_platform.h>
+#include <linux/pm.h>
+#include <asm/cacheflush.h>
+#include <asm/switch_to.h>
+
+#include <sysdev/fsl_soc.h>
 
 struct pmc_regs {
+	/* 0xe0070: Device disable control register */
 	__be32 devdisr;
+	/* 0xe0074: 2nd Device disable control register */
 	__be32 devdisr2;
-	__be32 :32;
-	__be32 :32;
-	__be32 pmcsr;
-#define PMCSR_SLP	(1 << 17)
+	__be32 res1;
+	/* 0xe007c: Power Management Jog Control Register */
+	__be32 pmjcr;
+	/* 0xe0080: Power management control and status register */
+	__be32 powmgtcsr;
+#define POWMGTCSR_SLP		0x00020000
+#define POWMGTCSR_DPSLP		0x00100000
+	__be32 res3[2];
+	/* 0xe008c: Power management clock disable register */
+	__be32 pmcdr;
 };
 
-static struct device *pmc_dev;
 static struct pmc_regs __iomem *pmc_regs;
+static unsigned int pmc_flag;
+
+#define PMC_SLEEP	0x1
+#define PMC_DEEP_SLEEP	0x2
 
 static int pmc_suspend_enter(suspend_state_t state)
 {
-	int ret;
+	int ret = 0;
+
+	switch (state) {
+#ifdef CONFIG_PPC_85xx
+	case PM_SUSPEND_MEM:
+#ifdef CONFIG_SPE
+		enable_kernel_spe();
+#endif
+		enable_kernel_fp();
+
+		pr_debug("%s: Entering deep sleep\n", __func__);
+
+		local_irq_disable();
+		mpc85xx_enter_deep_sleep(get_immrbase(), POWMGTCSR_DPSLP);
+
+		pr_debug("%s: Resumed from deep sleep\n", __func__);
+		break;
+#endif
 
-	setbits32(&pmc_regs->pmcsr, PMCSR_SLP);
-	/* At this point, the CPU is asleep. */
+	case PM_SUSPEND_STANDBY:
+		local_irq_disable();
+#ifdef CONFIG_PPC_85xx
+		flush_dcache_L1();
+#endif
+		setbits32(&pmc_regs->powmgtcsr, POWMGTCSR_SLP);
+		/* At this point, the CPU is asleep. */
 
-	/* Upon resume, wait for SLP bit to be clear. */
-	ret = spin_event_timeout((in_be32(&pmc_regs->pmcsr) & PMCSR_SLP) == 0,
-				 10000, 10) ? 0 : -ETIMEDOUT;
-	if (ret)
-		dev_err(pmc_dev, "tired waiting for SLP bit to clear\n");
+		/* Upon resume, wait for SLP bit to be clear. */
+		ret = spin_event_timeout(
+			(in_be32(&pmc_regs->powmgtcsr) & POWMGTCSR_SLP) == 0,
+			10000, 10);
+		if (!ret) {
+			pr_err("%s: timeout waiting for SLP bit "
+				"to be cleared\n", __func__);
+			ret = -EINVAL;
+		}
+		break;
+
+	default:
+		ret = -EINVAL;
+
+	}
 	return ret;
 }
 
 static int pmc_suspend_valid(suspend_state_t state)
 {
-	if (state != PM_SUSPEND_STANDBY)
+	if (((pmc_flag & PMC_SLEEP) && (state == PM_SUSPEND_STANDBY)) ||
+	    ((pmc_flag & PMC_DEEP_SLEEP) && (state == PM_SUSPEND_MEM)))
+		return 1;
+	else
 		return 0;
-	return 1;
 }
 
 static const struct platform_suspend_ops pmc_suspend_ops = {
@@ -59,14 +110,25 @@ static const struct platform_suspend_ops pmc_suspend_ops = {
 	.enter = pmc_suspend_enter,
 };
 
-static int pmc_probe(struct platform_device *ofdev)
+static int pmc_probe(struct platform_device *pdev)
 {
-	pmc_regs = of_iomap(ofdev->dev.of_node, 0);
+	struct device_node *np = pdev->dev.of_node;
+
+	pmc_regs = of_iomap(np, 0);
 	if (!pmc_regs)
 		return -ENOMEM;
 
-	pmc_dev = &ofdev->dev;
+	pmc_flag = PMC_SLEEP;
+	if (of_device_is_compatible(np, "fsl,mpc8536-pmc"))
+		pmc_flag |= PMC_DEEP_SLEEP;
+
+	if (of_device_is_compatible(np, "fsl,p1022-pmc"))
+		pmc_flag |= PMC_DEEP_SLEEP;
+
 	suspend_set_ops(&pmc_suspend_ops);
+
+	pr_info("Freescale PMC driver: sleep(standby)%s\n",
+		(pmc_flag & PMC_DEEP_SLEEP) ? ", deep sleep(mem)" : "");
 	return 0;
 }
 
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index c6d0073..11d9f94 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -48,5 +48,10 @@ extern struct platform_diu_data_ops diu_ops;
 void fsl_hv_restart(char *cmd);
 void fsl_hv_halt(void);
 
+/*
+ * ccsrbar is u64 rather than phys_addr_t so that the assembly
+ * code can be compatible with both 32-bit & 36-bit.
+ */
+extern void mpc85xx_enter_deep_sleep(u64 ccsrbar, u32 powmgtreq);
 #endif
 #endif
-- 
1.6.4.1

^ permalink raw reply related	[flat|nested] 39+ messages in thread

* [PATCH v8 5/7] powerpc/85xx: add sleep and deep sleep support
@ 2012-07-20 12:42   ` Zhao Chenhui
  0 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel, leoli

In sleep PM mode, the clocks of e500 core and unused IP blocks is
turned off. IP blocks which are allowed to wake up the processor
are still running.

Some Freescale chips like MPC8536 and P1022 has deep sleep PM mode
in addtion to the sleep PM mode.

While in deep sleep PM mode, additionally, the power supply is
removed from e500 core and most IP blocks. Only the blocks needed
to wake up the chip out of deep sleep are ON.

This patch supports 32-bit and 36-bit address space.

The sleep mode is equal to the Standby state in Linux. The deep sleep
mode is equal to the Suspend-to-RAM state of Linux Power Management.

Command to enter sleep mode.
  echo standby > /sys/power/state
Command to enter deep sleep mode.
  echo mem > /sys/power/state

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
 arch/powerpc/Kconfig                  |    2 +-
 arch/powerpc/include/asm/cacheflush.h |    2 +
 arch/powerpc/kernel/Makefile          |    3 +
 arch/powerpc/kernel/l2cache_85xx.S    |   56 +++
 arch/powerpc/platforms/85xx/Makefile  |    2 +-
 arch/powerpc/platforms/85xx/sleep.S   |  621 +++++++++++++++++++++++++++++++++
 arch/powerpc/sysdev/fsl_pmc.c         |   98 +++++-
 arch/powerpc/sysdev/fsl_soc.h         |    5 +
 8 files changed, 769 insertions(+), 20 deletions(-)
 create mode 100644 arch/powerpc/kernel/l2cache_85xx.S
 create mode 100644 arch/powerpc/platforms/85xx/sleep.S

diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index a7c6914..9d6de82 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -665,7 +665,7 @@ config FSL_PCI
 config FSL_PMC
 	bool
 	default y
-	depends on SUSPEND && (PPC_85xx || PPC_86xx)
+	depends on SUSPEND && (PPC_85xx || PPC_86xx) && !PPC_E500MC
 	help
 	  Freescale MPC85xx/MPC86xx power management controller support
 	  (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
index b843e35..6c5f1c2 100644
--- a/arch/powerpc/include/asm/cacheflush.h
+++ b/arch/powerpc/include/asm/cacheflush.h
@@ -58,6 +58,8 @@ extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
 extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
 #endif
 
+extern void flush_dcache_L1(void);
+
 #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
 	do { \
 		memcpy(dst, src, len); \
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 83afacd..0ddef24 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -64,6 +64,9 @@ obj-$(CONFIG_FA_DUMP)		+= fadump.o
 ifeq ($(CONFIG_PPC32),y)
 obj-$(CONFIG_E500)		+= idle_e500.o
 endif
+ifneq ($(CONFIG_PPC_E500MC),y)
+obj-$(CONFIG_PPC_85xx)		+= l2cache_85xx.o
+endif
 obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
 obj-$(CONFIG_TAU)		+= tau_6xx.o
 obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o
diff --git a/arch/powerpc/kernel/l2cache_85xx.S b/arch/powerpc/kernel/l2cache_85xx.S
new file mode 100644
index 0000000..e920d69
--- /dev/null
+++ b/arch/powerpc/kernel/l2cache_85xx.S
@@ -0,0 +1,56 @@
+/*
+ * Copyright (C) 2009-2012 Freescale Semiconductor, Inc. All rights reserved.
+ *	Scott Wood <scottwood@freescale.com>
+ *	Dave Liu <daveliu@freescale.com>
+ * implement the L2 cache operations of e500 based L2 controller
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/reg.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+
+#define L2CTL_L2E	0x80000000
+#define L2CTL_L2I	0x40000000
+
+	.section .text
+
+	/* r3 = virtual address of L2 controller, WIMG = 01xx */
+_GLOBAL(flush_disable_L2)
+	/* It's a write-through cache, so only invalidation is needed. */
+	mbar
+	isync
+	lwz	r4, 0(r3)
+	li	r5, 1
+	rlwimi	r4, r5, 30, L2CTL_L2E | L2CTL_L2I
+	stw	r4, 0(r3)
+
+	/* Wait for the invalidate to finish */
+1:	lwz	r4, 0(r3)
+	andis.	r4, r4, L2CTL_L2I@h
+	bne	1b
+	mbar
+
+	blr
+
+	/* r3 = virtual address of L2 controller, WIMG = 01xx */
+_GLOBAL(invalidate_enable_L2)
+	mbar
+	isync
+	lwz	r4, 0(r3)
+	li	r5, 3
+	rlwimi	r4, r5, 30, L2CTL_L2E | L2CTL_L2I
+	stw	r4, 0(r3)
+
+	/* Wait for the invalidate to finish */
+1:	lwz	r4, 0(r3)
+	andis.	r4, r4, L2CTL_L2I@h
+	bne	1b
+	mbar
+
+	blr
diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 3dfe811..405ab79 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -3,7 +3,7 @@
 #
 obj-$(CONFIG_SMP) += smp.o
 
-obj-y += common.o
+obj-y += common.o sleep.o
 
 obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
diff --git a/arch/powerpc/platforms/85xx/sleep.S b/arch/powerpc/platforms/85xx/sleep.S
new file mode 100644
index 0000000..e6dfede
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/sleep.S
@@ -0,0 +1,621 @@
+/*
+ * Enter and leave deep sleep/sleep state on MPC85xx
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (C) 2006-2012 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <asm/page.h>
+#include <asm/ppc_asm.h>
+#include <asm/reg.h>
+#include <asm/asm-offsets.h>
+#include <asm/mmu.h>
+
+#define CCSR_ADDR		0xf0000000
+
+#define L2C_OFFSET		0x20000	/* L2 Cache Controller offset */
+
+#define BPTR_OFFSET		0x20 /* Boot Page Translation Register */
+#define BPTR_EN			0x80000000
+
+#define PMRCCR_OFFSET		0xe0084
+#define PMRCCR_VRCNT_PRE_MASK	0x1f000000
+#define PMRCCR_VRCNT_MASK	0x00ff0000
+
+#define POWMGTSCR_OFFSET	0xe0080
+#define POWMGTSCR_DPSLP		0x00100000 /* deep sleep mode */
+
+#define SS_TB		0x00
+#define SS_HID		0x08 /* 2 HIDs */
+#define SS_IAC		0x10 /* 2 IACs */
+#define SS_DAC		0x18 /* 2 DACs */
+#define SS_DBCR		0x20 /* 3 DBCRs */
+#define SS_PID		0x2c /* 3 PIDs */
+#define SS_SPRG		0x38 /* 8 SPRGs */
+#define SS_IVOR		0x58 /* 20 interrupt vectors */
+#define SS_TCR		0xa8
+#define SS_BUCSR	0xac
+#define SS_L1CSR	0xb0 /* 2 L1CSRs */
+#define SS_MSR		0xb8
+#define SS_USPRG	0xbc
+#define SS_GPREG	0xc0 /* r12-r31 */
+#define SS_LR		0x110
+#define SS_CR		0x114
+#define SS_SP		0x118
+#define SS_CURRENT	0x11c
+#define SS_IVPR		0x120
+#define SS_BPTR		0x124
+
+#define STATE_SAVE_SIZE 0x128
+
+	.section .data
+	.align	5
+mpc85xx_sleep_save_area:
+	.space	STATE_SAVE_SIZE
+ccsrbase_low:
+	.long	0
+ccsrbase_high:
+	.long	0
+powmgtreq:
+	.long	0
+
+	.section .text
+	.align	12
+
+	/*
+	 * r3 = high word of physical address of CCSR
+	 * r4 = low word of physical address of CCSR
+	 * r5 = JOG or deep sleep request
+	 *      JOG-0x00200000, deep sleep-0x00100000
+	 */
+_GLOBAL(mpc85xx_enter_deep_sleep)
+	lis	r6, ccsrbase_low@ha
+	stw	r4, ccsrbase_low@l(r6)
+	lis	r6, ccsrbase_high@ha
+	stw	r3, ccsrbase_high@l(r6)
+
+	lis	r6, powmgtreq@ha
+	stw	r5, powmgtreq@l(r6)
+
+	lis	r10, mpc85xx_sleep_save_area@h
+	ori	r10, r10, mpc85xx_sleep_save_area@l
+
+	mfspr	r5, SPRN_HID0
+	mfspr	r6, SPRN_HID1
+
+	stw	r5, SS_HID+0(r10)
+	stw	r6, SS_HID+4(r10)
+
+	mfspr	r4, SPRN_IAC1
+	mfspr	r5, SPRN_IAC2
+	mfspr	r6, SPRN_DAC1
+	mfspr	r7, SPRN_DAC2
+
+	stw	r4, SS_IAC+0(r10)
+	stw	r5, SS_IAC+4(r10)
+	stw	r6, SS_DAC+0(r10)
+	stw	r7, SS_DAC+4(r10)
+
+	mfspr	r4, SPRN_DBCR0
+	mfspr	r5, SPRN_DBCR1
+	mfspr	r6, SPRN_DBCR2
+
+	stw	r4, SS_DBCR+0(r10)
+	stw	r5, SS_DBCR+4(r10)
+	stw	r6, SS_DBCR+8(r10)
+
+	mfspr	r4, SPRN_PID0
+	mfspr	r5, SPRN_PID1
+	mfspr	r6, SPRN_PID2
+
+	stw	r4, SS_PID+0(r10)
+	stw	r5, SS_PID+4(r10)
+	stw	r6, SS_PID+8(r10)
+
+	mfspr	r4, SPRN_SPRG0
+	mfspr	r5, SPRN_SPRG1
+	mfspr	r6, SPRN_SPRG2
+	mfspr	r7, SPRN_SPRG3
+
+	stw	r4, SS_SPRG+0x00(r10)
+	stw	r5, SS_SPRG+0x04(r10)
+	stw	r6, SS_SPRG+0x08(r10)
+	stw	r7, SS_SPRG+0x0c(r10)
+
+	mfspr	r4, SPRN_SPRG4
+	mfspr	r5, SPRN_SPRG5
+	mfspr	r6, SPRN_SPRG6
+	mfspr	r7, SPRN_SPRG7
+
+	stw	r4, SS_SPRG+0x10(r10)
+	stw	r5, SS_SPRG+0x14(r10)
+	stw	r6, SS_SPRG+0x18(r10)
+	stw	r7, SS_SPRG+0x1c(r10)
+
+	mfspr	r4, SPRN_IVPR
+	stw	r4, SS_IVPR(r10)
+
+	mfspr	r4, SPRN_IVOR0
+	mfspr	r5, SPRN_IVOR1
+	mfspr	r6, SPRN_IVOR2
+	mfspr	r7, SPRN_IVOR3
+
+	stw	r4, SS_IVOR+0x00(r10)
+	stw	r5, SS_IVOR+0x04(r10)
+	stw	r6, SS_IVOR+0x08(r10)
+	stw	r7, SS_IVOR+0x0c(r10)
+
+	mfspr	r4, SPRN_IVOR4
+	mfspr	r5, SPRN_IVOR5
+	mfspr	r6, SPRN_IVOR6
+	mfspr	r7, SPRN_IVOR7
+
+	stw	r4, SS_IVOR+0x10(r10)
+	stw	r5, SS_IVOR+0x14(r10)
+	stw	r6, SS_IVOR+0x18(r10)
+	stw	r7, SS_IVOR+0x1c(r10)
+
+	mfspr	r4, SPRN_IVOR8
+	mfspr	r5, SPRN_IVOR9
+	mfspr	r6, SPRN_IVOR10
+	mfspr	r7, SPRN_IVOR11
+
+	stw	r4, SS_IVOR+0x20(r10)
+	stw	r5, SS_IVOR+0x24(r10)
+	stw	r6, SS_IVOR+0x28(r10)
+	stw	r7, SS_IVOR+0x2c(r10)
+
+	mfspr	r4, SPRN_IVOR12
+	mfspr	r5, SPRN_IVOR13
+	mfspr	r6, SPRN_IVOR14
+	mfspr	r7, SPRN_IVOR15
+
+	stw	r4, SS_IVOR+0x30(r10)
+	stw	r5, SS_IVOR+0x34(r10)
+	stw	r6, SS_IVOR+0x38(r10)
+	stw	r7, SS_IVOR+0x3c(r10)
+
+	mfspr	r4, SPRN_IVOR32
+	mfspr	r5, SPRN_IVOR33
+	mfspr	r6, SPRN_IVOR34
+	mfspr	r7, SPRN_IVOR35
+
+	stw	r4, SS_IVOR+0x40(r10)
+	stw	r5, SS_IVOR+0x44(r10)
+	stw	r6, SS_IVOR+0x48(r10)
+	stw	r7, SS_IVOR+0x4c(r10)
+
+	mfspr	r4, SPRN_TCR
+	mfspr	r5, SPRN_BUCSR
+	mfspr	r6, SPRN_L1CSR0
+	mfspr	r7, SPRN_L1CSR1
+	mfspr	r8, SPRN_USPRG0
+
+	stw	r4, SS_TCR(r10)
+	stw	r5, SS_BUCSR(r10)
+	stw	r6, SS_L1CSR+0(r10)
+	stw	r7, SS_L1CSR+4(r10)
+	stw	r8, SS_USPRG+0(r10)
+
+	stmw	r12, SS_GPREG(r10)
+
+	mfmsr	r4
+	mflr	r5
+	mfcr	r6
+
+	stw	r4, SS_MSR(r10)
+	stw	r5, SS_LR(r10)
+	stw	r6, SS_CR(r10)
+	stw	r1, SS_SP(r10)
+	stw	r2, SS_CURRENT(r10)
+
+1:	mftbu	r4
+	mftb	r5
+	mftbu	r6
+	cmpw	r4, r6
+	bne	1b
+
+	stw	r4, SS_TB+0(r10)
+	stw	r5, SS_TB+4(r10)
+
+	lis	r5, ccsrbase_low@ha
+	lwz	r4, ccsrbase_low@l(r5)
+	lis	r5, ccsrbase_high@ha
+	lwz	r3, ccsrbase_high@l(r5)
+
+	/* Disable machine checks and critical exceptions */
+	mfmsr	r5
+	rlwinm	r5, r5, 0, ~MSR_CE
+	rlwinm	r5, r5, 0, ~MSR_ME
+	mtmsr	r5
+	isync
+
+	/* Use TLB1[15] to map the CCSR at 0xf0000000 */
+	LOAD_REG_IMMEDIATE(r5, MAS0_TLBSEL(1) | MAS0_ESEL(15))
+	mtspr	SPRN_MAS0, r5
+	LOAD_REG_IMMEDIATE(r5,
+		MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(BOOK3E_PAGESZ_1M))
+	mtspr	SPRN_MAS1, r5
+	LOAD_REG_IMMEDIATE(r5, CCSR_ADDR | MAS2_I | MAS2_M)
+	mtspr	SPRN_MAS2, r5
+	rlwinm	r5, r4, 0, MAS3_RPN
+	ori	r5, r5, (MAS3_SW | MAS3_SR)
+	mtspr	SPRN_MAS3, r5
+	mtspr	SPRN_MAS7, r3
+	isync
+	tlbwe
+	isync
+
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + BPTR_OFFSET)
+	lwz	r4, 0(r3)
+	stw	r4, SS_BPTR(r10)
+
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + L2C_OFFSET)
+	bl	flush_disable_L2
+	bl	__flush_disable_L1
+
+	/* Enable I-cache, so as not to upset the bus
+	 * with our loop.
+	 */
+	mfspr	r4, SPRN_L1CSR1
+	ori	r4, r4, L1CSR1_ICE
+	mtspr	SPRN_L1CSR1, r4
+	isync
+
+	/* Set boot page translation */
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + BPTR_OFFSET)
+	lis	r4, (mpc85xx_deep_resume - PAGE_OFFSET)@h
+	ori	r4, r4, (mpc85xx_deep_resume - PAGE_OFFSET)@l
+	rlwinm	r4, r4, 20, 12, 31
+	oris	r4, r4, BPTR_EN@h
+	stw	r4, 0(r3)
+	lwz	r4, 0(r3) /* read-back to flush write */
+	twi	0, r4, 0
+	isync
+
+	/* Disable the decrementer */
+	mfspr	r4, SPRN_TCR
+	rlwinm	r4, r4, 0, ~TCR_DIE
+	mtspr	SPRN_TCR, r4
+
+	mfspr	r4, SPRN_TSR
+	oris	r4, r4, TSR_DIS@h
+	mtspr	SPRN_TSR, r4
+
+	/* set PMRCCR[VRCNT] to wait power stable for 40ms */
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + PMRCCR_OFFSET)
+	lwz	r4, 0(r3)
+	li	r5, 0x12
+	rlwimi	r4, r5, 0, PMRCCR_VRCNT_PRE_MASK
+	li	r5, 0xa3
+	rlwimi	r4, r5, 0, PMRCCR_VRCNT_MASK
+	stw	r4, 0(r3)
+	lwz	r4, 0(r3)
+
+	/* set deep sleep bit in POWMGTSCR */
+	lis	r3, powmgtreq@ha
+	lwz	r8, powmgtreq@l(r3)
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + POWMGTSCR_OFFSET)
+	lwz	r4, 0(r3)
+	or	r4, r4, r8
+	stw	r4, 0(r3)
+	lwz	r4, 0(r3)		/* read-back to flush write */
+	twi	0, r4, 0
+	isync
+
+	mftb	r5
+1:	/* spin until either we enter deep sleep, or the sleep process is
+	 * aborted due to a pending wakeup event.  Wait some time between
+	 * accesses, so we don't flood the bus and prevent the pmc from
+	 * detecting an idle system.
+	 */
+
+	mftb	r4
+	subf	r7, r5, r4
+	cmpwi	r7, 1000
+	blt	1b
+	mr	r5, r4
+
+	lwz	r6, 0(r3)
+	andis.	r6, r6, POWMGTSCR_DPSLP@h
+	bne	1b
+	b	2f
+
+2:	mfspr	r4, SPRN_PIR
+	andi.	r4, r4, 1
+99:	bne	99b
+
+	/* Establish a temporary 64MB 0->0 mapping in TLB1[1]. */
+	LOAD_REG_IMMEDIATE(r4, MAS0_TLBSEL(1) | MAS0_ESEL(1))
+	mtspr	SPRN_MAS0, r4
+	LOAD_REG_IMMEDIATE(r4,
+		MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(BOOK3E_PAGESZ_64M))
+	mtspr	SPRN_MAS1, r4
+	li	r4, 0
+	mtspr	SPRN_MAS2, r4
+	li	r4, (MAS3_SX | MAS3_SW | MAS3_SR)
+	mtspr	SPRN_MAS3, r4
+	li	r4, 0
+	mtspr	SPRN_MAS7, r4
+	isync
+	tlbwe
+	isync
+
+	lis	r3, (3f - PAGE_OFFSET)@h
+	ori	r3, r3, (3f - PAGE_OFFSET)@l
+	mtctr	r3
+	bctr
+
+	/* Locate the resume vector in the last word of the current page. */
+	. = mpc85xx_enter_deep_sleep + 0xffc
+mpc85xx_deep_resume:
+	b	2b
+
+3:
+	/* Restore the contents of TLB1[0].  It is assumed that it covers
+	 * the currently executing code and the sleep save area, and that
+	 * it does not alias our temporary mapping (which is at virtual zero).
+	 */
+	lis	r3, (TLBCAM - PAGE_OFFSET)@h
+	ori	r3, r3, (TLBCAM - PAGE_OFFSET)@l
+
+	lwz	r4, 0(r3)
+	lwz	r5, 4(r3)
+	lwz	r6, 8(r3)
+	lwz	r7, 12(r3)
+	lwz	r8, 16(r3)
+
+	mtspr	SPRN_MAS0, r4
+	mtspr	SPRN_MAS1, r5
+	mtspr	SPRN_MAS2, r6
+	mtspr	SPRN_MAS3, r7
+	mtspr	SPRN_MAS7, r8
+
+	isync
+	tlbwe
+	isync
+
+	/* Access the ccsrbase address with TLB1[0] */
+	lis	r5, ccsrbase_low@ha
+	lwz	r4, ccsrbase_low@l(r5)
+	lis	r5, ccsrbase_high@ha
+	lwz	r3, ccsrbase_high@l(r5)
+
+	/* Use TLB1[15] to map the CCSR at 0xf0000000 */
+	LOAD_REG_IMMEDIATE(r5, MAS0_TLBSEL(1) | MAS0_ESEL(15))
+	mtspr	SPRN_MAS0, r5
+	LOAD_REG_IMMEDIATE(r5,
+		MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(BOOK3E_PAGESZ_1M))
+	mtspr	SPRN_MAS1, r5
+	LOAD_REG_IMMEDIATE(r5, CCSR_ADDR | MAS2_I | MAS2_M)
+	mtspr	SPRN_MAS2, r5
+	rlwinm	r5, r4, 0, MAS3_RPN
+	ori	r5, r5, (MAS3_SW | MAS3_SR)
+	mtspr	SPRN_MAS3, r5
+	mtspr	SPRN_MAS7, r3
+	isync
+	tlbwe
+	isync
+
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + L2C_OFFSET)
+	bl	invalidate_enable_L2
+
+	/* Access the MEM(r10) with TLB1[0] */
+	lis	r10, mpc85xx_sleep_save_area@h
+	ori	r10, r10, mpc85xx_sleep_save_area@l
+
+	LOAD_REG_IMMEDIATE(r3, CCSR_ADDR + BPTR_OFFSET)
+	lwz	r4, SS_BPTR(r10)
+	stw	r4, 0(r3)		/* restore BPTR */
+
+	/* Program shift running space to PAGE_OFFSET */
+	mfmsr	r3
+	lis	r4, 1f@h
+	ori	r4, r4, 1f@l
+
+	mtsrr1	r3
+	mtsrr0	r4
+	rfi
+
+1:	/* Restore the rest of TLB1, in ascending order so that
+	 * the TLB1[1] gets invalidated first.
+	 *
+	 * XXX: It's better to invalidate the temporary mapping
+	 * TLB1[15] for CCSR before restore any TLB1 entry include 0.
+	 */
+	LOAD_REG_IMMEDIATE(r4, MAS0_TLBSEL(1) | MAS0_ESEL(15))
+	mtspr	SPRN_MAS0, r4
+	lis	r4, 0
+	mtspr	SPRN_MAS1, r4
+	isync
+	tlbwe
+	isync
+
+	lis	r3, (TLBCAM + 5*4 - 4)@h
+	ori	r3, r3, (TLBCAM + 5*4 - 4)@l
+	li	r4, 15
+	mtctr	r4
+
+2:
+	lwz	r5, 4(r3)
+	lwz	r6, 8(r3)
+	lwz	r7, 12(r3)
+	lwz	r8, 16(r3)
+	lwzu	r9, 20(r3)
+
+	mtspr	SPRN_MAS0, r5
+	mtspr	SPRN_MAS1, r6
+	mtspr	SPRN_MAS2, r7
+	mtspr	SPRN_MAS3, r8
+	mtspr	SPRN_MAS7, r9
+
+	isync
+	tlbwe
+	isync
+	bdnz	2b
+
+	lis	r10, mpc85xx_sleep_save_area@h
+	ori	r10, r10, mpc85xx_sleep_save_area@l
+
+	lwz	r5, SS_HID+0(r10)
+	lwz	r6, SS_HID+4(r10)
+
+	isync
+	mtspr	SPRN_HID0, r5
+	isync
+
+	msync
+	mtspr	SPRN_HID1, r6
+	isync
+
+	lwz	r4, SS_IAC+0(r10)
+	lwz	r5, SS_IAC+4(r10)
+	lwz	r6, SS_DAC+0(r10)
+	lwz	r7, SS_DAC+4(r10)
+
+	mtspr	SPRN_IAC1, r4
+	mtspr	SPRN_IAC2, r5
+	mtspr	SPRN_DAC1, r6
+	mtspr	SPRN_DAC2, r7
+
+	lwz	r4, SS_DBCR+0(r10)
+	lwz	r5, SS_DBCR+4(r10)
+	lwz	r6, SS_DBCR+8(r10)
+
+	mtspr	SPRN_DBCR0, r4
+	mtspr	SPRN_DBCR1, r5
+	mtspr	SPRN_DBCR2, r6
+
+	lwz	r4, SS_PID+0(r10)
+	lwz	r5, SS_PID+4(r10)
+	lwz	r6, SS_PID+8(r10)
+
+	mtspr	SPRN_PID0, r4
+	mtspr	SPRN_PID1, r5
+	mtspr	SPRN_PID2, r6
+
+	lwz	r4, SS_SPRG+0x00(r10)
+	lwz	r5, SS_SPRG+0x04(r10)
+	lwz	r6, SS_SPRG+0x08(r10)
+	lwz	r7, SS_SPRG+0x0c(r10)
+
+	mtspr	SPRN_SPRG0, r4
+	mtspr	SPRN_SPRG1, r5
+	mtspr	SPRN_SPRG2, r6
+	mtspr	SPRN_SPRG3, r7
+
+	lwz	r4, SS_SPRG+0x10(r10)
+	lwz	r5, SS_SPRG+0x14(r10)
+	lwz	r6, SS_SPRG+0x18(r10)
+	lwz	r7, SS_SPRG+0x1c(r10)
+
+	mtspr	SPRN_SPRG4, r4
+	mtspr	SPRN_SPRG5, r5
+	mtspr	SPRN_SPRG6, r6
+	mtspr	SPRN_SPRG7, r7
+
+	lwz	r4, SS_IVPR(r10)
+	mtspr	SPRN_IVPR, r4
+
+	lwz	r4, SS_IVOR+0x00(r10)
+	lwz	r5, SS_IVOR+0x04(r10)
+	lwz	r6, SS_IVOR+0x08(r10)
+	lwz	r7, SS_IVOR+0x0c(r10)
+
+	mtspr	SPRN_IVOR0, r4
+	mtspr	SPRN_IVOR1, r5
+	mtspr	SPRN_IVOR2, r6
+	mtspr	SPRN_IVOR3, r7
+
+	lwz	r4, SS_IVOR+0x10(r10)
+	lwz	r5, SS_IVOR+0x14(r10)
+	lwz	r6, SS_IVOR+0x18(r10)
+	lwz	r7, SS_IVOR+0x1c(r10)
+
+	mtspr	SPRN_IVOR4, r4
+	mtspr	SPRN_IVOR5, r5
+	mtspr	SPRN_IVOR6, r6
+	mtspr	SPRN_IVOR7, r7
+
+	lwz	r4, SS_IVOR+0x20(r10)
+	lwz	r5, SS_IVOR+0x24(r10)
+	lwz	r6, SS_IVOR+0x28(r10)
+	lwz	r7, SS_IVOR+0x2c(r10)
+
+	mtspr	SPRN_IVOR8, r4
+	mtspr	SPRN_IVOR9, r5
+	mtspr	SPRN_IVOR10, r6
+	mtspr	SPRN_IVOR11, r7
+
+	lwz	r4, SS_IVOR+0x30(r10)
+	lwz	r5, SS_IVOR+0x34(r10)
+	lwz	r6, SS_IVOR+0x38(r10)
+	lwz	r7, SS_IVOR+0x3c(r10)
+
+	mtspr	SPRN_IVOR12, r4
+	mtspr	SPRN_IVOR13, r5
+	mtspr	SPRN_IVOR14, r6
+	mtspr	SPRN_IVOR15, r7
+
+	lwz	r4, SS_IVOR+0x40(r10)
+	lwz	r5, SS_IVOR+0x44(r10)
+	lwz	r6, SS_IVOR+0x48(r10)
+	lwz	r7, SS_IVOR+0x4c(r10)
+
+	mtspr	SPRN_IVOR32, r4
+	mtspr	SPRN_IVOR33, r5
+	mtspr	SPRN_IVOR34, r6
+	mtspr	SPRN_IVOR35, r7
+
+	lwz	r4, SS_TCR(r10)
+	lwz	r5, SS_BUCSR(r10)
+	lwz	r6, SS_L1CSR+0(r10)
+	lwz	r7, SS_L1CSR+4(r10)
+	lwz	r8, SS_USPRG+0(r10)
+
+	mtspr	SPRN_TCR, r4
+	mtspr	SPRN_BUCSR, r5
+
+	msync
+	isync
+	mtspr	SPRN_L1CSR0, r6
+	isync
+
+	mtspr	SPRN_L1CSR1, r7
+	isync
+
+	mtspr	SPRN_USPRG0, r8
+
+	lmw	r12, SS_GPREG(r10)
+
+	lwz	r1, SS_SP(r10)
+	lwz	r2, SS_CURRENT(r10)
+	lwz	r4, SS_MSR(r10)
+	lwz	r5, SS_LR(r10)
+	lwz	r6, SS_CR(r10)
+
+	msync
+	mtmsr	r4
+	isync
+
+	mtlr	r5
+	mtcr	r6
+
+	li	r4, 0
+	mtspr	SPRN_TBWL, r4
+
+	lwz	r4, SS_TB+0(r10)
+	lwz	r5, SS_TB+4(r10)
+
+	mtspr	SPRN_TBWU, r4
+	mtspr	SPRN_TBWL, r5
+
+	lis	r3, 1
+	mtdec	r3
+
+	blr
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index 592a0f8..45718c5 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -2,6 +2,7 @@
  * Suspend/resume support
  *
  * Copyright 2009  MontaVista Software, Inc.
+ * Copyright 2010-2012 Freescale Semiconductor Inc.
  *
  * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
  *
@@ -19,39 +20,89 @@
 #include <linux/delay.h>
 #include <linux/device.h>
 #include <linux/of_platform.h>
+#include <linux/pm.h>
+#include <asm/cacheflush.h>
+#include <asm/switch_to.h>
+
+#include <sysdev/fsl_soc.h>
 
 struct pmc_regs {
+	/* 0xe0070: Device disable control register */
 	__be32 devdisr;
+	/* 0xe0074: 2nd Device disable control register */
 	__be32 devdisr2;
-	__be32 :32;
-	__be32 :32;
-	__be32 pmcsr;
-#define PMCSR_SLP	(1 << 17)
+	__be32 res1;
+	/* 0xe007c: Power Management Jog Control Register */
+	__be32 pmjcr;
+	/* 0xe0080: Power management control and status register */
+	__be32 powmgtcsr;
+#define POWMGTCSR_SLP		0x00020000
+#define POWMGTCSR_DPSLP		0x00100000
+	__be32 res3[2];
+	/* 0xe008c: Power management clock disable register */
+	__be32 pmcdr;
 };
 
-static struct device *pmc_dev;
 static struct pmc_regs __iomem *pmc_regs;
+static unsigned int pmc_flag;
+
+#define PMC_SLEEP	0x1
+#define PMC_DEEP_SLEEP	0x2
 
 static int pmc_suspend_enter(suspend_state_t state)
 {
-	int ret;
+	int ret = 0;
+
+	switch (state) {
+#ifdef CONFIG_PPC_85xx
+	case PM_SUSPEND_MEM:
+#ifdef CONFIG_SPE
+		enable_kernel_spe();
+#endif
+		enable_kernel_fp();
+
+		pr_debug("%s: Entering deep sleep\n", __func__);
+
+		local_irq_disable();
+		mpc85xx_enter_deep_sleep(get_immrbase(), POWMGTCSR_DPSLP);
+
+		pr_debug("%s: Resumed from deep sleep\n", __func__);
+		break;
+#endif
 
-	setbits32(&pmc_regs->pmcsr, PMCSR_SLP);
-	/* At this point, the CPU is asleep. */
+	case PM_SUSPEND_STANDBY:
+		local_irq_disable();
+#ifdef CONFIG_PPC_85xx
+		flush_dcache_L1();
+#endif
+		setbits32(&pmc_regs->powmgtcsr, POWMGTCSR_SLP);
+		/* At this point, the CPU is asleep. */
 
-	/* Upon resume, wait for SLP bit to be clear. */
-	ret = spin_event_timeout((in_be32(&pmc_regs->pmcsr) & PMCSR_SLP) == 0,
-				 10000, 10) ? 0 : -ETIMEDOUT;
-	if (ret)
-		dev_err(pmc_dev, "tired waiting for SLP bit to clear\n");
+		/* Upon resume, wait for SLP bit to be clear. */
+		ret = spin_event_timeout(
+			(in_be32(&pmc_regs->powmgtcsr) & POWMGTCSR_SLP) == 0,
+			10000, 10);
+		if (!ret) {
+			pr_err("%s: timeout waiting for SLP bit "
+				"to be cleared\n", __func__);
+			ret = -EINVAL;
+		}
+		break;
+
+	default:
+		ret = -EINVAL;
+
+	}
 	return ret;
 }
 
 static int pmc_suspend_valid(suspend_state_t state)
 {
-	if (state != PM_SUSPEND_STANDBY)
+	if (((pmc_flag & PMC_SLEEP) && (state == PM_SUSPEND_STANDBY)) ||
+	    ((pmc_flag & PMC_DEEP_SLEEP) && (state == PM_SUSPEND_MEM)))
+		return 1;
+	else
 		return 0;
-	return 1;
 }
 
 static const struct platform_suspend_ops pmc_suspend_ops = {
@@ -59,14 +110,25 @@ static const struct platform_suspend_ops pmc_suspend_ops = {
 	.enter = pmc_suspend_enter,
 };
 
-static int pmc_probe(struct platform_device *ofdev)
+static int pmc_probe(struct platform_device *pdev)
 {
-	pmc_regs = of_iomap(ofdev->dev.of_node, 0);
+	struct device_node *np = pdev->dev.of_node;
+
+	pmc_regs = of_iomap(np, 0);
 	if (!pmc_regs)
 		return -ENOMEM;
 
-	pmc_dev = &ofdev->dev;
+	pmc_flag = PMC_SLEEP;
+	if (of_device_is_compatible(np, "fsl,mpc8536-pmc"))
+		pmc_flag |= PMC_DEEP_SLEEP;
+
+	if (of_device_is_compatible(np, "fsl,p1022-pmc"))
+		pmc_flag |= PMC_DEEP_SLEEP;
+
 	suspend_set_ops(&pmc_suspend_ops);
+
+	pr_info("Freescale PMC driver: sleep(standby)%s\n",
+		(pmc_flag & PMC_DEEP_SLEEP) ? ", deep sleep(mem)" : "");
 	return 0;
 }
 
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index c6d0073..11d9f94 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -48,5 +48,10 @@ extern struct platform_diu_data_ops diu_ops;
 void fsl_hv_restart(char *cmd);
 void fsl_hv_halt(void);
 
+/*
+ * ccsrbar is u64 rather than phys_addr_t so that the assembly
+ * code can be compatible with both 32-bit & 36-bit.
+ */
+extern void mpc85xx_enter_deep_sleep(u64 ccsrbar, u32 powmgtreq);
 #endif
 #endif
-- 
1.6.4.1



^ permalink raw reply related	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 5/7] powerpc/85xx: add sleep and deep sleep support
  2012-07-20 12:42   ` Zhao Chenhui
@ 2012-07-31 14:15     ` Kumar Gala
  -1 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:15 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: scottwood, linuxppc-dev, linux-kernel


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> In sleep PM mode, the clocks of e500 core and unused IP blocks is
> turned off. IP blocks which are allowed to wake up the processor
> are still running.
>=20
> Some Freescale chips like MPC8536 and P1022 has deep sleep PM mode
> in addtion to the sleep PM mode.
>=20
> While in deep sleep PM mode, additionally, the power supply is
> removed from e500 core and most IP blocks. Only the blocks needed
> to wake up the chip out of deep sleep are ON.
>=20
> This patch supports 32-bit and 36-bit address space.
>=20
> The sleep mode is equal to the Standby state in Linux. The deep sleep
> mode is equal to the Suspend-to-RAM state of Linux Power Management.
>=20
> Command to enter sleep mode.
>  echo standby > /sys/power/state
> Command to enter deep sleep mode.
>  echo mem > /sys/power/state
>=20
> Signed-off-by: Dave Liu <daveliu@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Jin Qing <b24347@freescale.com>
> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
> Cc: Scott Wood <scottwood@freescale.com>
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> ---
> arch/powerpc/Kconfig                  |    2 +-
> arch/powerpc/include/asm/cacheflush.h |    2 +
> arch/powerpc/kernel/Makefile          |    3 +
> arch/powerpc/kernel/l2cache_85xx.S    |   56 +++
> arch/powerpc/platforms/85xx/Makefile  |    2 +-
> arch/powerpc/platforms/85xx/sleep.S   |  621 =
+++++++++++++++++++++++++++++++++
> arch/powerpc/sysdev/fsl_pmc.c         |   98 +++++-
> arch/powerpc/sysdev/fsl_soc.h         |    5 +
> 8 files changed, 769 insertions(+), 20 deletions(-)
> create mode 100644 arch/powerpc/kernel/l2cache_85xx.S
> create mode 100644 arch/powerpc/platforms/85xx/sleep.S
>=20
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index a7c6914..9d6de82 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -665,7 +665,7 @@ config FSL_PCI
> config FSL_PMC
> 	bool
> 	default y
> -	depends on SUSPEND && (PPC_85xx || PPC_86xx)
> +	depends on SUSPEND && (PPC_85xx || PPC_86xx) && !PPC_E500MC
> 	help
> 	  Freescale MPC85xx/MPC86xx power management controller support
> 	  (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
> diff --git a/arch/powerpc/include/asm/cacheflush.h =
b/arch/powerpc/include/asm/cacheflush.h
> index b843e35..6c5f1c2 100644
> --- a/arch/powerpc/include/asm/cacheflush.h
> +++ b/arch/powerpc/include/asm/cacheflush.h
> @@ -58,6 +58,8 @@ extern void flush_inval_dcache_range(unsigned long =
start, unsigned long stop);
> extern void flush_dcache_phys_range(unsigned long start, unsigned long =
stop);
> #endif
>=20
> +extern void flush_dcache_L1(void);
> +
> #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
> 	do { \
> 		memcpy(dst, src, len); \
> diff --git a/arch/powerpc/kernel/Makefile =
b/arch/powerpc/kernel/Makefile
> index 83afacd..0ddef24 100644
> --- a/arch/powerpc/kernel/Makefile
> +++ b/arch/powerpc/kernel/Makefile
> @@ -64,6 +64,9 @@ obj-$(CONFIG_FA_DUMP)		+=3D fadump.o
> ifeq ($(CONFIG_PPC32),y)
> obj-$(CONFIG_E500)		+=3D idle_e500.o
> endif
> +ifneq ($(CONFIG_PPC_E500MC),y)
> +obj-$(CONFIG_PPC_85xx)		+=3D l2cache_85xx.o
> +endif

why do we need this, beyond reduce code size on an e500mc kernel build?  =
If so why isn't 85xx/sleep.S doing the same thing?

> obj-$(CONFIG_6xx)		+=3D idle_6xx.o l2cr_6xx.o =
cpu_setup_6xx.o
> obj-$(CONFIG_TAU)		+=3D tau_6xx.o
> obj-$(CONFIG_HIBERNATION)	+=3D swsusp.o suspend.o
> diff --git a/arch/powerpc/kernel/l2cache_85xx.S =
b/arch/powerpc/kernel/l2cache_85xx.S
> new file mode 100644
> index 0000000..e920d69
> --- /dev/null
> +++ b/arch/powerpc/kernel/l2cache_85xx.S
> @@ -0,0 +1,56 @@
> +/*
> + * Copyright (C) 2009-2012 Freescale Semiconductor, Inc. All rights =
reserved.
> + *	Scott Wood <scottwood@freescale.com>
> + *	Dave Liu <daveliu@freescale.com>
> + * implement the L2 cache operations of e500 based L2 controller
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +#include <asm/reg.h>
> +#include <asm/cputable.h>
> +#include <asm/ppc_asm.h>
> +#include <asm/asm-offsets.h>
> +
> +#define L2CTL_L2E	0x80000000
> +#define L2CTL_L2I	0x40000000
> +
> +	.section .text
> +
> +	/* r3 =3D virtual address of L2 controller, WIMG =3D 01xx */
> +_GLOBAL(flush_disable_L2)
> +	/* It's a write-through cache, so only invalidation is needed. =
*/
> +	mbar
> +	isync
> +	lwz	r4, 0(r3)
> +	li	r5, 1
> +	rlwimi	r4, r5, 30, L2CTL_L2E | L2CTL_L2I
> +	stw	r4, 0(r3)
> +
> +	/* Wait for the invalidate to finish */
> +1:	lwz	r4, 0(r3)
> +	andis.	r4, r4, L2CTL_L2I@h
> +	bne	1b
> +	mbar
> +
> +	blr
> +
> +	/* r3 =3D virtual address of L2 controller, WIMG =3D 01xx */
> +_GLOBAL(invalidate_enable_L2)
> +	mbar
> +	isync
> +	lwz	r4, 0(r3)
> +	li	r5, 3
> +	rlwimi	r4, r5, 30, L2CTL_L2E | L2CTL_L2I
> +	stw	r4, 0(r3)
> +
> +	/* Wait for the invalidate to finish */
> +1:	lwz	r4, 0(r3)
> +	andis.	r4, r4, L2CTL_L2I@h
> +	bne	1b
> +	mbar
> +
> +	blr
> diff --git a/arch/powerpc/platforms/85xx/Makefile =
b/arch/powerpc/platforms/85xx/Makefile
> index 3dfe811..405ab79 100644
> --- a/arch/powerpc/platforms/85xx/Makefile
> +++ b/arch/powerpc/platforms/85xx/Makefile
> @@ -3,7 +3,7 @@
> #
> obj-$(CONFIG_SMP) +=3D smp.o
>=20
> -obj-y +=3D common.o
> +obj-y +=3D common.o sleep.o
>=20
> obj-$(CONFIG_BSC9131_RDB) +=3D bsc913x_rdb.o
> obj-$(CONFIG_MPC8540_ADS) +=3D mpc85xx_ads.o
>=20

- k

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 5/7] powerpc/85xx: add sleep and deep sleep support
@ 2012-07-31 14:15     ` Kumar Gala
  0 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:15 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: linuxppc-dev, scottwood, linux-kernel, leoli


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> In sleep PM mode, the clocks of e500 core and unused IP blocks is
> turned off. IP blocks which are allowed to wake up the processor
> are still running.
> 
> Some Freescale chips like MPC8536 and P1022 has deep sleep PM mode
> in addtion to the sleep PM mode.
> 
> While in deep sleep PM mode, additionally, the power supply is
> removed from e500 core and most IP blocks. Only the blocks needed
> to wake up the chip out of deep sleep are ON.
> 
> This patch supports 32-bit and 36-bit address space.
> 
> The sleep mode is equal to the Standby state in Linux. The deep sleep
> mode is equal to the Suspend-to-RAM state of Linux Power Management.
> 
> Command to enter sleep mode.
>  echo standby > /sys/power/state
> Command to enter deep sleep mode.
>  echo mem > /sys/power/state
> 
> Signed-off-by: Dave Liu <daveliu@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Jin Qing <b24347@freescale.com>
> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
> Cc: Scott Wood <scottwood@freescale.com>
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> ---
> arch/powerpc/Kconfig                  |    2 +-
> arch/powerpc/include/asm/cacheflush.h |    2 +
> arch/powerpc/kernel/Makefile          |    3 +
> arch/powerpc/kernel/l2cache_85xx.S    |   56 +++
> arch/powerpc/platforms/85xx/Makefile  |    2 +-
> arch/powerpc/platforms/85xx/sleep.S   |  621 +++++++++++++++++++++++++++++++++
> arch/powerpc/sysdev/fsl_pmc.c         |   98 +++++-
> arch/powerpc/sysdev/fsl_soc.h         |    5 +
> 8 files changed, 769 insertions(+), 20 deletions(-)
> create mode 100644 arch/powerpc/kernel/l2cache_85xx.S
> create mode 100644 arch/powerpc/platforms/85xx/sleep.S
> 
> diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> index a7c6914..9d6de82 100644
> --- a/arch/powerpc/Kconfig
> +++ b/arch/powerpc/Kconfig
> @@ -665,7 +665,7 @@ config FSL_PCI
> config FSL_PMC
> 	bool
> 	default y
> -	depends on SUSPEND && (PPC_85xx || PPC_86xx)
> +	depends on SUSPEND && (PPC_85xx || PPC_86xx) && !PPC_E500MC
> 	help
> 	  Freescale MPC85xx/MPC86xx power management controller support
> 	  (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
> diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
> index b843e35..6c5f1c2 100644
> --- a/arch/powerpc/include/asm/cacheflush.h
> +++ b/arch/powerpc/include/asm/cacheflush.h
> @@ -58,6 +58,8 @@ extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
> extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
> #endif
> 
> +extern void flush_dcache_L1(void);
> +
> #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
> 	do { \
> 		memcpy(dst, src, len); \
> diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
> index 83afacd..0ddef24 100644
> --- a/arch/powerpc/kernel/Makefile
> +++ b/arch/powerpc/kernel/Makefile
> @@ -64,6 +64,9 @@ obj-$(CONFIG_FA_DUMP)		+= fadump.o
> ifeq ($(CONFIG_PPC32),y)
> obj-$(CONFIG_E500)		+= idle_e500.o
> endif
> +ifneq ($(CONFIG_PPC_E500MC),y)
> +obj-$(CONFIG_PPC_85xx)		+= l2cache_85xx.o
> +endif

why do we need this, beyond reduce code size on an e500mc kernel build?  If so why isn't 85xx/sleep.S doing the same thing?

> obj-$(CONFIG_6xx)		+= idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o
> obj-$(CONFIG_TAU)		+= tau_6xx.o
> obj-$(CONFIG_HIBERNATION)	+= swsusp.o suspend.o
> diff --git a/arch/powerpc/kernel/l2cache_85xx.S b/arch/powerpc/kernel/l2cache_85xx.S
> new file mode 100644
> index 0000000..e920d69
> --- /dev/null
> +++ b/arch/powerpc/kernel/l2cache_85xx.S
> @@ -0,0 +1,56 @@
> +/*
> + * Copyright (C) 2009-2012 Freescale Semiconductor, Inc. All rights reserved.
> + *	Scott Wood <scottwood@freescale.com>
> + *	Dave Liu <daveliu@freescale.com>
> + * implement the L2 cache operations of e500 based L2 controller
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * as published by the Free Software Foundation; either version
> + * 2 of the License, or (at your option) any later version.
> + */
> +
> +#include <asm/reg.h>
> +#include <asm/cputable.h>
> +#include <asm/ppc_asm.h>
> +#include <asm/asm-offsets.h>
> +
> +#define L2CTL_L2E	0x80000000
> +#define L2CTL_L2I	0x40000000
> +
> +	.section .text
> +
> +	/* r3 = virtual address of L2 controller, WIMG = 01xx */
> +_GLOBAL(flush_disable_L2)
> +	/* It's a write-through cache, so only invalidation is needed. */
> +	mbar
> +	isync
> +	lwz	r4, 0(r3)
> +	li	r5, 1
> +	rlwimi	r4, r5, 30, L2CTL_L2E | L2CTL_L2I
> +	stw	r4, 0(r3)
> +
> +	/* Wait for the invalidate to finish */
> +1:	lwz	r4, 0(r3)
> +	andis.	r4, r4, L2CTL_L2I@h
> +	bne	1b
> +	mbar
> +
> +	blr
> +
> +	/* r3 = virtual address of L2 controller, WIMG = 01xx */
> +_GLOBAL(invalidate_enable_L2)
> +	mbar
> +	isync
> +	lwz	r4, 0(r3)
> +	li	r5, 3
> +	rlwimi	r4, r5, 30, L2CTL_L2E | L2CTL_L2I
> +	stw	r4, 0(r3)
> +
> +	/* Wait for the invalidate to finish */
> +1:	lwz	r4, 0(r3)
> +	andis.	r4, r4, L2CTL_L2I@h
> +	bne	1b
> +	mbar
> +
> +	blr
> diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
> index 3dfe811..405ab79 100644
> --- a/arch/powerpc/platforms/85xx/Makefile
> +++ b/arch/powerpc/platforms/85xx/Makefile
> @@ -3,7 +3,7 @@
> #
> obj-$(CONFIG_SMP) += smp.o
> 
> -obj-y += common.o
> +obj-y += common.o sleep.o
> 
> obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
> obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
> 

- k


^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 5/7] powerpc/85xx: add sleep and deep sleep support
  2012-07-31 14:15     ` Kumar Gala
@ 2012-08-02 11:12       ` Zhao Chenhui
  -1 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-08-02 11:12 UTC (permalink / raw)
  To: Kumar Gala; +Cc: scottwood, linuxppc-dev, linux-kernel

On Tue, Jul 31, 2012 at 09:15:33AM -0500, Kumar Gala wrote:
> 
> On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:
> 
> > In sleep PM mode, the clocks of e500 core and unused IP blocks is
> > turned off. IP blocks which are allowed to wake up the processor
> > are still running.
> > 
> > Some Freescale chips like MPC8536 and P1022 has deep sleep PM mode
> > in addtion to the sleep PM mode.
> > 
> > While in deep sleep PM mode, additionally, the power supply is
> > removed from e500 core and most IP blocks. Only the blocks needed
> > to wake up the chip out of deep sleep are ON.
> > 
> > This patch supports 32-bit and 36-bit address space.
> > 
> > The sleep mode is equal to the Standby state in Linux. The deep sleep
> > mode is equal to the Suspend-to-RAM state of Linux Power Management.
> > 
> > Command to enter sleep mode.
> >  echo standby > /sys/power/state
> > Command to enter deep sleep mode.
> >  echo mem > /sys/power/state
> > 
> > Signed-off-by: Dave Liu <daveliu@freescale.com>
> > Signed-off-by: Li Yang <leoli@freescale.com>
> > Signed-off-by: Jin Qing <b24347@freescale.com>
> > Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
> > Cc: Scott Wood <scottwood@freescale.com>
> > Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> > ---
> > arch/powerpc/Kconfig                  |    2 +-
> > arch/powerpc/include/asm/cacheflush.h |    2 +
> > arch/powerpc/kernel/Makefile          |    3 +
> > arch/powerpc/kernel/l2cache_85xx.S    |   56 +++
> > arch/powerpc/platforms/85xx/Makefile  |    2 +-
> > arch/powerpc/platforms/85xx/sleep.S   |  621 +++++++++++++++++++++++++++++++++
> > arch/powerpc/sysdev/fsl_pmc.c         |   98 +++++-
> > arch/powerpc/sysdev/fsl_soc.h         |    5 +
> > 8 files changed, 769 insertions(+), 20 deletions(-)
> > create mode 100644 arch/powerpc/kernel/l2cache_85xx.S
> > create mode 100644 arch/powerpc/platforms/85xx/sleep.S
> > 
> > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> > index a7c6914..9d6de82 100644
> > --- a/arch/powerpc/Kconfig
> > +++ b/arch/powerpc/Kconfig
> > @@ -665,7 +665,7 @@ config FSL_PCI
> > config FSL_PMC
> > 	bool
> > 	default y
> > -	depends on SUSPEND && (PPC_85xx || PPC_86xx)
> > +	depends on SUSPEND && (PPC_85xx || PPC_86xx) && !PPC_E500MC
> > 	help
> > 	  Freescale MPC85xx/MPC86xx power management controller support
> > 	  (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
> > diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
> > index b843e35..6c5f1c2 100644
> > --- a/arch/powerpc/include/asm/cacheflush.h
> > +++ b/arch/powerpc/include/asm/cacheflush.h
> > @@ -58,6 +58,8 @@ extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
> > extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
> > #endif
> > 
> > +extern void flush_dcache_L1(void);
> > +
> > #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
> > 	do { \
> > 		memcpy(dst, src, len); \
> > diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
> > index 83afacd..0ddef24 100644
> > --- a/arch/powerpc/kernel/Makefile
> > +++ b/arch/powerpc/kernel/Makefile
> > @@ -64,6 +64,9 @@ obj-$(CONFIG_FA_DUMP)		+= fadump.o
> > ifeq ($(CONFIG_PPC32),y)
> > obj-$(CONFIG_E500)		+= idle_e500.o
> > endif
> > +ifneq ($(CONFIG_PPC_E500MC),y)
> > +obj-$(CONFIG_PPC_85xx)		+= l2cache_85xx.o
> > +endif
> 
> why do we need this, beyond reduce code size on an e500mc kernel build?  If so why isn't 85xx/sleep.S doing the same thing?
> - k
> 

Yes, it is a little awkward. I have an idea to put e500/e500mc/e5500/e6500 related flush cache routines
into this file, and rename it to cache_fsl_booke.S.

As for 85xx/sleep.S, it is used by fsl_pmc.c. I will use CONFIG_FSL_PMC to guard it.

-Chenhui

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 5/7] powerpc/85xx: add sleep and deep sleep support
@ 2012-08-02 11:12       ` Zhao Chenhui
  0 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-08-02 11:12 UTC (permalink / raw)
  To: Kumar Gala; +Cc: linuxppc-dev, scottwood, linux-kernel, leoli

On Tue, Jul 31, 2012 at 09:15:33AM -0500, Kumar Gala wrote:
> 
> On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:
> 
> > In sleep PM mode, the clocks of e500 core and unused IP blocks is
> > turned off. IP blocks which are allowed to wake up the processor
> > are still running.
> > 
> > Some Freescale chips like MPC8536 and P1022 has deep sleep PM mode
> > in addtion to the sleep PM mode.
> > 
> > While in deep sleep PM mode, additionally, the power supply is
> > removed from e500 core and most IP blocks. Only the blocks needed
> > to wake up the chip out of deep sleep are ON.
> > 
> > This patch supports 32-bit and 36-bit address space.
> > 
> > The sleep mode is equal to the Standby state in Linux. The deep sleep
> > mode is equal to the Suspend-to-RAM state of Linux Power Management.
> > 
> > Command to enter sleep mode.
> >  echo standby > /sys/power/state
> > Command to enter deep sleep mode.
> >  echo mem > /sys/power/state
> > 
> > Signed-off-by: Dave Liu <daveliu@freescale.com>
> > Signed-off-by: Li Yang <leoli@freescale.com>
> > Signed-off-by: Jin Qing <b24347@freescale.com>
> > Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
> > Cc: Scott Wood <scottwood@freescale.com>
> > Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> > ---
> > arch/powerpc/Kconfig                  |    2 +-
> > arch/powerpc/include/asm/cacheflush.h |    2 +
> > arch/powerpc/kernel/Makefile          |    3 +
> > arch/powerpc/kernel/l2cache_85xx.S    |   56 +++
> > arch/powerpc/platforms/85xx/Makefile  |    2 +-
> > arch/powerpc/platforms/85xx/sleep.S   |  621 +++++++++++++++++++++++++++++++++
> > arch/powerpc/sysdev/fsl_pmc.c         |   98 +++++-
> > arch/powerpc/sysdev/fsl_soc.h         |    5 +
> > 8 files changed, 769 insertions(+), 20 deletions(-)
> > create mode 100644 arch/powerpc/kernel/l2cache_85xx.S
> > create mode 100644 arch/powerpc/platforms/85xx/sleep.S
> > 
> > diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
> > index a7c6914..9d6de82 100644
> > --- a/arch/powerpc/Kconfig
> > +++ b/arch/powerpc/Kconfig
> > @@ -665,7 +665,7 @@ config FSL_PCI
> > config FSL_PMC
> > 	bool
> > 	default y
> > -	depends on SUSPEND && (PPC_85xx || PPC_86xx)
> > +	depends on SUSPEND && (PPC_85xx || PPC_86xx) && !PPC_E500MC
> > 	help
> > 	  Freescale MPC85xx/MPC86xx power management controller support
> > 	  (suspend/resume). For MPC83xx see platforms/83xx/suspend.c
> > diff --git a/arch/powerpc/include/asm/cacheflush.h b/arch/powerpc/include/asm/cacheflush.h
> > index b843e35..6c5f1c2 100644
> > --- a/arch/powerpc/include/asm/cacheflush.h
> > +++ b/arch/powerpc/include/asm/cacheflush.h
> > @@ -58,6 +58,8 @@ extern void flush_inval_dcache_range(unsigned long start, unsigned long stop);
> > extern void flush_dcache_phys_range(unsigned long start, unsigned long stop);
> > #endif
> > 
> > +extern void flush_dcache_L1(void);
> > +
> > #define copy_to_user_page(vma, page, vaddr, dst, src, len) \
> > 	do { \
> > 		memcpy(dst, src, len); \
> > diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
> > index 83afacd..0ddef24 100644
> > --- a/arch/powerpc/kernel/Makefile
> > +++ b/arch/powerpc/kernel/Makefile
> > @@ -64,6 +64,9 @@ obj-$(CONFIG_FA_DUMP)		+= fadump.o
> > ifeq ($(CONFIG_PPC32),y)
> > obj-$(CONFIG_E500)		+= idle_e500.o
> > endif
> > +ifneq ($(CONFIG_PPC_E500MC),y)
> > +obj-$(CONFIG_PPC_85xx)		+= l2cache_85xx.o
> > +endif
> 
> why do we need this, beyond reduce code size on an e500mc kernel build?  If so why isn't 85xx/sleep.S doing the same thing?
> - k
> 

Yes, it is a little awkward. I have an idea to put e500/e500mc/e5500/e6500 related flush cache routines
into this file, and rename it to cache_fsl_booke.S.

As for 85xx/sleep.S, it is used by fsl_pmc.c. I will use CONFIG_FSL_PMC to guard it.

-Chenhui


^ permalink raw reply	[flat|nested] 39+ messages in thread

* [PATCH v8 6/7] fsl_pmc: Add API to enable device as wakeup event source
  2012-07-20 12:42 ` Zhao Chenhui
@ 2012-07-20 12:42   ` Zhao Chenhui
  -1 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel

Add APIs for setting wakeup source and lossless Ethernet in low power modes.
These APIs can be used by wake-on-packet feature.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
 arch/powerpc/sysdev/fsl_pmc.c |   77 ++++++++++++++++++++++++++++++++++++++++-
 arch/powerpc/sysdev/fsl_soc.h |   12 ++++++
 2 files changed, 88 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index 45718c5..b6c8c8f 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -38,6 +38,7 @@ struct pmc_regs {
 	__be32 powmgtcsr;
 #define POWMGTCSR_SLP		0x00020000
 #define POWMGTCSR_DPSLP		0x00100000
+#define POWMGTCSR_LOSSLESS	0x00400000
 	__be32 res3[2];
 	/* 0xe008c: Power management clock disable register */
 	__be32 pmcdr;
@@ -48,6 +49,77 @@ static unsigned int pmc_flag;
 
 #define PMC_SLEEP	0x1
 #define PMC_DEEP_SLEEP	0x2
+#define PMC_LOSSLESS	0x4
+
+#define PMCDR_MASK_INIT		0x00e008e0
+
+/**
+ * mpc85xx_pmc_set_wake - enable devices as wakeup event source
+ * @dev: a device affected
+ * @enable: True to enable event generation; false to disable
+ *
+ * This enables the device as a wakeup event source, or disables it.
+ *
+ * RETURN VALUE:
+ * 0 is returned on success.
+ * -EINVAL is returned if device is not supposed to wake up the system.
+ * -ENODEV is returned if PMC is unavailable.
+ * Error code depending on the platform is returned if both the platform and
+ * the native mechanism fail to enable the generation of wake-up events
+ */
+int mpc85xx_pmc_set_wake(struct device *dev, bool enable)
+{
+	int ret = 0;
+	struct device_node *clk_np;
+	const u32 *prop;
+	u32 pmcdr_mask;
+
+	if (!pmc_regs) {
+		pr_err("%s: PMC is unavailable\n", __func__);
+		return -ENODEV;
+	}
+
+	if (enable && !device_may_wakeup(dev))
+		return -EINVAL;
+
+	clk_np = of_parse_phandle(dev->of_node, "fsl,pmc-handle", 0);
+	if (!clk_np)
+		return -EINVAL;
+
+	prop = of_get_property(clk_np, "fsl,pmcdr-mask", NULL);
+	if (!prop) {
+		ret = -EINVAL;
+		goto out;
+	}
+	pmcdr_mask = be32_to_cpup(prop);
+
+	if (enable)
+		/* clear to enable clock in low power mode */
+		clrbits32(&pmc_regs->pmcdr, pmcdr_mask);
+	else
+		setbits32(&pmc_regs->pmcdr, pmcdr_mask);
+
+out:
+	of_node_put(clk_np);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mpc85xx_pmc_set_wake);
+
+/**
+ * mpc85xx_pmc_set_lossless_ethernet - enable lossless ethernet
+ * in (deep) sleep mode
+ * @enable: True to enable event generation; false to disable
+ */
+void mpc85xx_pmc_set_lossless_ethernet(int enable)
+{
+	if (pmc_flag & PMC_LOSSLESS) {
+		if (enable)
+			setbits32(&pmc_regs->powmgtcsr,	POWMGTCSR_LOSSLESS);
+		else
+			clrbits32(&pmc_regs->powmgtcsr, POWMGTCSR_LOSSLESS);
+	}
+}
+EXPORT_SYMBOL_GPL(mpc85xx_pmc_set_lossless_ethernet);
 
 static int pmc_suspend_enter(suspend_state_t state)
 {
@@ -123,7 +195,10 @@ static int pmc_probe(struct platform_device *pdev)
 		pmc_flag |= PMC_DEEP_SLEEP;
 
 	if (of_device_is_compatible(np, "fsl,p1022-pmc"))
-		pmc_flag |= PMC_DEEP_SLEEP;
+		pmc_flag |= PMC_DEEP_SLEEP | PMC_LOSSLESS;
+
+	/* Init the Power Management Clock Disable Register. */
+	setbits32(&pmc_regs->pmcdr, PMCDR_MASK_INIT);
 
 	suspend_set_ops(&pmc_suspend_ops);
 
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 11d9f94..b1510ef 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -3,6 +3,7 @@
 #ifdef __KERNEL__
 
 #include <asm/mmu.h>
+#include <linux/platform_device.h>
 
 struct spi_device;
 
@@ -21,6 +22,17 @@ struct device_node;
 
 extern void fsl_rstcr_restart(char *cmd);
 
+#ifdef CONFIG_FSL_PMC
+extern int mpc85xx_pmc_set_wake(struct device *dev, bool enable);
+extern void mpc85xx_pmc_set_lossless_ethernet(int enable);
+#else
+static inline int mpc85xx_pmc_set_wake(struct device *dev, bool enable)
+{
+	return -ENODEV;
+}
+#define mpc85xx_pmc_set_lossless_ethernet(enable)	do { } while (0)
+#endif
+
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
 /* The different ports that the DIU can be connected to */
-- 
1.6.4.1

^ permalink raw reply related	[flat|nested] 39+ messages in thread

* [PATCH v8 6/7] fsl_pmc: Add API to enable device as wakeup event source
@ 2012-07-20 12:42   ` Zhao Chenhui
  0 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel, leoli

Add APIs for setting wakeup source and lossless Ethernet in low power modes.
These APIs can be used by wake-on-packet feature.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
---
 arch/powerpc/sysdev/fsl_pmc.c |   77 ++++++++++++++++++++++++++++++++++++++++-
 arch/powerpc/sysdev/fsl_soc.h |   12 ++++++
 2 files changed, 88 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index 45718c5..b6c8c8f 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -38,6 +38,7 @@ struct pmc_regs {
 	__be32 powmgtcsr;
 #define POWMGTCSR_SLP		0x00020000
 #define POWMGTCSR_DPSLP		0x00100000
+#define POWMGTCSR_LOSSLESS	0x00400000
 	__be32 res3[2];
 	/* 0xe008c: Power management clock disable register */
 	__be32 pmcdr;
@@ -48,6 +49,77 @@ static unsigned int pmc_flag;
 
 #define PMC_SLEEP	0x1
 #define PMC_DEEP_SLEEP	0x2
+#define PMC_LOSSLESS	0x4
+
+#define PMCDR_MASK_INIT		0x00e008e0
+
+/**
+ * mpc85xx_pmc_set_wake - enable devices as wakeup event source
+ * @dev: a device affected
+ * @enable: True to enable event generation; false to disable
+ *
+ * This enables the device as a wakeup event source, or disables it.
+ *
+ * RETURN VALUE:
+ * 0 is returned on success.
+ * -EINVAL is returned if device is not supposed to wake up the system.
+ * -ENODEV is returned if PMC is unavailable.
+ * Error code depending on the platform is returned if both the platform and
+ * the native mechanism fail to enable the generation of wake-up events
+ */
+int mpc85xx_pmc_set_wake(struct device *dev, bool enable)
+{
+	int ret = 0;
+	struct device_node *clk_np;
+	const u32 *prop;
+	u32 pmcdr_mask;
+
+	if (!pmc_regs) {
+		pr_err("%s: PMC is unavailable\n", __func__);
+		return -ENODEV;
+	}
+
+	if (enable && !device_may_wakeup(dev))
+		return -EINVAL;
+
+	clk_np = of_parse_phandle(dev->of_node, "fsl,pmc-handle", 0);
+	if (!clk_np)
+		return -EINVAL;
+
+	prop = of_get_property(clk_np, "fsl,pmcdr-mask", NULL);
+	if (!prop) {
+		ret = -EINVAL;
+		goto out;
+	}
+	pmcdr_mask = be32_to_cpup(prop);
+
+	if (enable)
+		/* clear to enable clock in low power mode */
+		clrbits32(&pmc_regs->pmcdr, pmcdr_mask);
+	else
+		setbits32(&pmc_regs->pmcdr, pmcdr_mask);
+
+out:
+	of_node_put(clk_np);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(mpc85xx_pmc_set_wake);
+
+/**
+ * mpc85xx_pmc_set_lossless_ethernet - enable lossless ethernet
+ * in (deep) sleep mode
+ * @enable: True to enable event generation; false to disable
+ */
+void mpc85xx_pmc_set_lossless_ethernet(int enable)
+{
+	if (pmc_flag & PMC_LOSSLESS) {
+		if (enable)
+			setbits32(&pmc_regs->powmgtcsr,	POWMGTCSR_LOSSLESS);
+		else
+			clrbits32(&pmc_regs->powmgtcsr, POWMGTCSR_LOSSLESS);
+	}
+}
+EXPORT_SYMBOL_GPL(mpc85xx_pmc_set_lossless_ethernet);
 
 static int pmc_suspend_enter(suspend_state_t state)
 {
@@ -123,7 +195,10 @@ static int pmc_probe(struct platform_device *pdev)
 		pmc_flag |= PMC_DEEP_SLEEP;
 
 	if (of_device_is_compatible(np, "fsl,p1022-pmc"))
-		pmc_flag |= PMC_DEEP_SLEEP;
+		pmc_flag |= PMC_DEEP_SLEEP | PMC_LOSSLESS;
+
+	/* Init the Power Management Clock Disable Register. */
+	setbits32(&pmc_regs->pmcdr, PMCDR_MASK_INIT);
 
 	suspend_set_ops(&pmc_suspend_ops);
 
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index 11d9f94..b1510ef 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -3,6 +3,7 @@
 #ifdef __KERNEL__
 
 #include <asm/mmu.h>
+#include <linux/platform_device.h>
 
 struct spi_device;
 
@@ -21,6 +22,17 @@ struct device_node;
 
 extern void fsl_rstcr_restart(char *cmd);
 
+#ifdef CONFIG_FSL_PMC
+extern int mpc85xx_pmc_set_wake(struct device *dev, bool enable);
+extern void mpc85xx_pmc_set_lossless_ethernet(int enable);
+#else
+static inline int mpc85xx_pmc_set_wake(struct device *dev, bool enable)
+{
+	return -ENODEV;
+}
+#define mpc85xx_pmc_set_lossless_ethernet(enable)	do { } while (0)
+#endif
+
 #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE)
 
 /* The different ports that the DIU can be connected to */
-- 
1.6.4.1



^ permalink raw reply related	[flat|nested] 39+ messages in thread

* [PATCH v8 7/7] powerpc/85xx: add support to JOG feature using cpufreq interface
  2012-07-20 12:42 ` Zhao Chenhui
@ 2012-07-20 12:42   ` Zhao Chenhui
  -1 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel

Some 85xx silicons like MPC8536 and P1022 have a JOG feature, which provides
a dynamic mechanism to lower or raise the CPU core clock at runtime.

This patch adds the support to change CPU frequency using the standard
cpufreq interface. The ratio CORE to CCB can be 1:1(except MPC8536), 3:2,
2:1, 5:2, 3:1, 7:2 and 4:1.

Two CPU cores on P1022 must not in the low power state during the frequency
transition. The driver uses a atomic counter to meet the requirement.

The jog mode frequency transition process on the MPC8536 is similar to
the deep sleep process. The driver need save the CPU state and restore
it after CPU warm reset.

Note:
 * The I/O peripherals such as PCIe and eTSEC may lose packets during
   the jog mode frequency transition.
 * The driver doesn't support MPC8536 Rev 1.0 due to a JOG erratum.
   Subsequent revisions of MPC8536 have corrected the erratum.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/85xx/Makefile      |    1 +
 arch/powerpc/platforms/85xx/cpufreq-jog.c |  388 +++++++++++++++++++++++++++++
 arch/powerpc/platforms/Kconfig            |   11 +
 arch/powerpc/sysdev/fsl_pmc.c             |    3 +
 arch/powerpc/sysdev/fsl_soc.h             |    2 +
 include/linux/cpu.h                       |    4 +
 6 files changed, 409 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/platforms/85xx/cpufreq-jog.c

diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 405ab79..901cdd5 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -4,6 +4,7 @@
 obj-$(CONFIG_SMP) += smp.o
 
 obj-y += common.o sleep.o
+obj-$(CONFIG_MPC85xx_CPUFREQ) += cpufreq-jog.o
 
 obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
diff --git a/arch/powerpc/platforms/85xx/cpufreq-jog.c b/arch/powerpc/platforms/85xx/cpufreq-jog.c
new file mode 100644
index 0000000..ccc0c33
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/cpufreq-jog.c
@@ -0,0 +1,388 @@
+/*
+ * Copyright (C) 2008-2012 Freescale Semiconductor, Inc.
+ * Author: Dave Liu <daveliu@freescale.com>
+ * Modifier: Chenhui Zhao <chenhui.zhao@freescale.com>
+ *
+ * The cpufreq driver is for Freescale 85xx processor,
+ * based on arch/powerpc/platforms/cell/cbe_cpufreq.c
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
+ *	Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <linux/of_platform.h>
+#include <linux/suspend.h>
+#include <linux/cpu.h>
+
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/smp.h>
+
+#include <sysdev/fsl_soc.h>
+
+static DEFINE_MUTEX(mpc85xx_switch_mutex);
+static void __iomem *guts;
+
+static u32 sysfreq;
+static unsigned int max_pll[2];
+static atomic_t in_jog_process;
+static struct cpufreq_frequency_table *mpc85xx_freqs;
+static int (*set_pll)(unsigned int cpu, unsigned int pll);
+
+static struct cpufreq_frequency_table mpc8536_freqs_table[] = {
+	{3,	0},
+	{4,	0},
+	{5,	0},
+	{6,	0},
+	{7,	0},
+	{8,	0},
+	{0,	CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table p1022_freqs_table[] = {
+	{2,	0},
+	{3,	0},
+	{4,	0},
+	{5,	0},
+	{6,	0},
+	{7,	0},
+	{8,	0},
+	{0,	CPUFREQ_TABLE_END},
+};
+
+#define FREQ_500MHz	500000000
+#define FREQ_800MHz	800000000
+
+#define CORE_RATIO_STRIDE	8
+#define CORE_RATIO_MASK		0x3f
+#define CORE_RATIO_SHIFT	16
+
+#define PORPLLSR	0x0	/* Power-On Reset PLL ratio status register */
+
+#define PMJCR		0x7c	/* Power Management Jog Control Register */
+#define PMJCR_CORE0_SPD	0x00001000
+#define PMJCR_CORE_SPD	0x00002000
+
+#define POWMGTCSR	0x80 /* Power management control and status register */
+#define POWMGTCSR_JOG		0x00200000
+#define POWMGTCSR_INT_MASK	0x00000f00
+
+static void spin_while_jogging(void *dummy)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	atomic_inc(&in_jog_process);
+
+	while (atomic_read(&in_jog_process) != 0)
+		barrier();
+
+	local_irq_restore(flags);
+}
+
+static int get_pll(int hw_cpu)
+{
+	int shift;
+	u32 val = in_be32(guts + PORPLLSR);
+
+	shift = hw_cpu * CORE_RATIO_STRIDE + CORE_RATIO_SHIFT;
+
+	return (val >> shift) & CORE_RATIO_MASK;
+}
+
+static int mpc8536_set_pll(unsigned int cpu, unsigned int pll)
+{
+	u32 corefreq, val, mask;
+	unsigned int cur_pll = get_pll(0);
+	unsigned long flags;
+
+	if (pll == cur_pll)
+		return 0;
+
+	val = (pll & CORE_RATIO_MASK) << CORE_RATIO_SHIFT;
+
+	corefreq = sysfreq * pll / 2;
+	/*
+	 * Set the COREx_SPD bit if the requested core frequency
+	 * is larger than the threshold frequency.
+	 */
+	if (corefreq > FREQ_800MHz)
+			val |= PMJCR_CORE_SPD;
+
+	mask = (CORE_RATIO_MASK << CORE_RATIO_SHIFT) | PMJCR_CORE_SPD;
+	clrsetbits_be32(guts + PMJCR, mask, val);
+
+	/* readback to sync write */
+	in_be32(guts + PMJCR);
+
+	local_irq_save(flags);
+	mpc85xx_enter_deep_sleep(get_immrbase(), POWMGTCSR_JOG);
+	local_irq_restore(flags);
+
+	/* verify */
+	cur_pll =  get_pll(0);
+	if (cur_pll != pll) {
+		pr_err("%s: error. The current PLL is %d instead of %d.\n",
+				__func__, cur_pll, pll);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int p1022_set_pll(unsigned int cpu, unsigned int pll)
+{
+	int index, hw_cpu = get_hard_smp_processor_id(cpu);
+	int shift;
+	u32 corefreq, val, mask = 0;
+	unsigned int cur_pll = get_pll(hw_cpu);
+	unsigned long flags;
+	int ret = 0;
+
+	if (pll == cur_pll)
+		return 0;
+
+	shift = hw_cpu * CORE_RATIO_STRIDE + CORE_RATIO_SHIFT;
+	val = (pll & CORE_RATIO_MASK) << shift;
+
+	corefreq = sysfreq * pll / 2;
+	/*
+	 * Set the COREx_SPD bit if the requested core frequency
+	 * is larger than the threshold frequency.
+	 */
+	if (corefreq > FREQ_500MHz)
+		val |= PMJCR_CORE0_SPD << hw_cpu;
+
+	mask = (CORE_RATIO_MASK << shift) | (PMJCR_CORE0_SPD << hw_cpu);
+	clrsetbits_be32(guts + PMJCR, mask, val);
+
+	/* readback to sync write */
+	in_be32(guts + PMJCR);
+
+	cpu_hotplug_disable_before_freeze();
+	/*
+	 * A Jog request can not be asserted when any core is in a low
+	 * power state on P1022. Before executing a jog request, any
+	 * core which is in a low power state must be waked by a
+	 * interrupt, and keep waking up until the sequence is
+	 * finished.
+	 */
+	for_each_present_cpu(index) {
+		if (!cpu_online(index)) {
+			cpu_hotplug_enable_after_thaw();
+			pr_err("%s: error, core%d is down.\n", __func__, index);
+			return -1;
+		}
+	}
+
+	atomic_set(&in_jog_process, 0);
+	smp_call_function(spin_while_jogging, NULL, 0);
+
+	local_irq_save(flags);
+
+	/* Wait for the other core to wake. */
+	if (!spin_event_timeout(atomic_read(&in_jog_process) == 1, 1000, 100)) {
+		pr_err("%s: timeout, the other core is not at running state.\n",
+					__func__);
+		ret = -1;
+		goto err;
+	}
+
+	out_be32(guts + POWMGTCSR, POWMGTCSR_JOG | POWMGTCSR_INT_MASK);
+
+	if (!spin_event_timeout(
+		(in_be32(guts + POWMGTCSR) & POWMGTCSR_JOG) == 0, 1000, 100)) {
+		pr_err("%s: timeout, fail to switch the core frequency.\n",
+				__func__);
+		ret = -1;
+		goto err;
+	}
+
+	clrbits32(guts + POWMGTCSR, POWMGTCSR_INT_MASK);
+	in_be32(guts + POWMGTCSR);
+
+	atomic_set(&in_jog_process, 0);
+err:
+	local_irq_restore(flags);
+	cpu_hotplug_enable_after_thaw();
+
+	/* verify */
+	cur_pll =  get_pll(hw_cpu);
+	if (cur_pll != pll) {
+		pr_err("%s: error, the current PLL of core %d is %d instead of %d.\n",
+				__func__, hw_cpu, cur_pll, pll);
+		return -1;
+	}
+
+	return ret;
+}
+
+/*
+ * cpufreq functions
+ */
+static int mpc85xx_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int i, cur_pll;
+	int hw_cpu = get_hard_smp_processor_id(policy->cpu);
+
+	if (!cpu_present(policy->cpu))
+		return -ENODEV;
+
+	/* the latency of a transition, the unit is ns */
+	policy->cpuinfo.transition_latency = 2000;
+
+	cur_pll = get_pll(hw_cpu);
+
+	/* initialize frequency table */
+	pr_debug("core%d frequency table:\n", hw_cpu);
+	for (i = 0; mpc85xx_freqs[i].frequency != CPUFREQ_TABLE_END; i++) {
+		if (mpc85xx_freqs[i].index <= max_pll[hw_cpu]) {
+			/* The frequency unit is kHz. */
+			mpc85xx_freqs[i].frequency =
+				(sysfreq * mpc85xx_freqs[i].index / 2) / 1000;
+		} else {
+			mpc85xx_freqs[i].frequency = CPUFREQ_ENTRY_INVALID;
+		}
+
+		pr_debug("%d: %dkHz\n", i, mpc85xx_freqs[i].frequency);
+
+		if (mpc85xx_freqs[i].index == cur_pll)
+			policy->cur = mpc85xx_freqs[i].frequency;
+	}
+	pr_debug("current pll is at %d, and core freq is%d\n",
+			cur_pll, policy->cur);
+
+	cpufreq_frequency_table_get_attr(mpc85xx_freqs, policy->cpu);
+
+	/*
+	 * This ensures that policy->cpuinfo_min
+	 * and policy->cpuinfo_max are set correctly.
+	 */
+	return cpufreq_frequency_table_cpuinfo(policy, mpc85xx_freqs);
+}
+
+static int mpc85xx_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+
+	return 0;
+}
+
+static int mpc85xx_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, mpc85xx_freqs);
+}
+
+static int mpc85xx_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	unsigned int new;
+	int ret = 0;
+
+	if (!set_pll)
+		return -ENODEV;
+
+	cpufreq_frequency_table_target(policy,
+				       mpc85xx_freqs,
+				       target_freq,
+				       relation,
+				       &new);
+
+	freqs.old = policy->cur;
+	freqs.new = mpc85xx_freqs[new].frequency;
+	freqs.cpu = policy->cpu;
+
+	mutex_lock(&mpc85xx_switch_mutex);
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	ret = set_pll(policy->cpu, mpc85xx_freqs[new].index);
+	if (!ret) {
+		pr_info("cpufreq: Setting core%d frequency to %d kHz and PLL ratio to %d:2\n",
+			 policy->cpu, mpc85xx_freqs[new].frequency,
+			 mpc85xx_freqs[new].index);
+
+		ppc_proc_freq = freqs.new * 1000ul;
+	}
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	mutex_unlock(&mpc85xx_switch_mutex);
+
+	return ret;
+}
+
+static struct cpufreq_driver mpc85xx_cpufreq_driver = {
+	.verify		= mpc85xx_cpufreq_verify,
+	.target		= mpc85xx_cpufreq_target,
+	.init		= mpc85xx_cpufreq_cpu_init,
+	.exit		= mpc85xx_cpufreq_cpu_exit,
+	.name		= "mpc85xx-JOG",
+	.owner		= THIS_MODULE,
+	.flags		= CPUFREQ_CONST_LOOPS,
+};
+
+static struct of_device_id mpc85xx_jog_ids[] = {
+	{ .compatible = "fsl,mpc8536-guts", },
+	{ .compatible = "fsl,p1022-guts", },
+	{}
+};
+
+int mpc85xx_jog_probe(void)
+{
+	struct device_node *np;
+	unsigned int svr;
+
+	np = of_find_matching_node(NULL, mpc85xx_jog_ids);
+	if (!np)
+		return -ENODEV;
+
+	guts = of_iomap(np, 0);
+	if (!guts) {
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	sysfreq = fsl_get_sys_freq();
+
+	if (of_device_is_compatible(np, "fsl,mpc8536-guts")) {
+		svr = mfspr(SPRN_SVR);
+		if ((svr & 0x7fff) == 0x10) {
+			pr_err("MPC8536 Rev 1.0 does not support cpufreq(JOG).\n");
+			of_node_put(np);
+			return -ENODEV;
+		}
+		mpc85xx_freqs = mpc8536_freqs_table;
+		set_pll = mpc8536_set_pll;
+		max_pll[0] = get_pll(0);
+
+	} else if (of_device_is_compatible(np, "fsl,p1022-guts")) {
+		mpc85xx_freqs = p1022_freqs_table;
+		set_pll = p1022_set_pll;
+		max_pll[0] = get_pll(0);
+		max_pll[1] = get_pll(1);
+	}
+
+	pr_info("Freescale MPC85xx cpufreq(JOG) driver\n");
+
+	of_node_put(np);
+	return cpufreq_register_driver(&mpc85xx_cpufreq_driver);
+}
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index a35ca44..7dbd239 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -204,6 +204,17 @@ config CPU_FREQ_PMAC64
 	  This adds support for frequency switching on Apple iMac G5,
 	  and some of the more recent desktop G5 machines as well.
 
+config MPC85xx_CPUFREQ
+	bool "Support for Freescale MPC85xx CPU freq"
+	depends on PPC_85xx && FSL_PMC
+	default n
+	select CPU_FREQ_TABLE
+	help
+	  This adds support for dynamic frequency switching on
+	  Freescale MPC85xx by cpufreq interface. MPC8536 and P1022
+	  have a JOG feature, which provides a dynamic mechanism
+	  to lower or raise the CPU core clock at runtime.
+
 config PPC_PASEMI_CPUFREQ
 	bool "Support for PA Semi PWRficient"
 	depends on PPC_PASEMI
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index b6c8c8f..b809a1b 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -202,6 +202,9 @@ static int pmc_probe(struct platform_device *pdev)
 
 	suspend_set_ops(&pmc_suspend_ops);
 
+#ifdef CONFIG_MPC85xx_CPUFREQ
+	mpc85xx_jog_probe();
+#endif
 	pr_info("Freescale PMC driver: sleep(standby)%s\n",
 		(pmc_flag & PMC_DEEP_SLEEP) ? ", deep sleep(mem)" : "");
 	return 0;
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index b1510ef..25be25c 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -65,5 +65,7 @@ void fsl_hv_halt(void);
  * code can be compatible with both 32-bit & 36-bit.
  */
 extern void mpc85xx_enter_deep_sleep(u64 ccsrbar, u32 powmgtreq);
+
+extern int mpc85xx_jog_probe(void);
 #endif
 #endif
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 2e9b9eb..c1ba260 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -145,6 +145,8 @@ void notify_cpu_starting(unsigned int cpu);
 extern void cpu_maps_update_begin(void);
 extern void cpu_maps_update_done(void);
 
+extern void cpu_hotplug_disable_before_freeze(void);
+extern void cpu_hotplug_enable_after_thaw(void);
 #else	/* CONFIG_SMP */
 
 #define cpu_notifier(fn, pri)	do { (void)(fn); } while (0)
@@ -166,6 +168,8 @@ static inline void cpu_maps_update_done(void)
 {
 }
 
+static inline void cpu_hotplug_disable_before_freeze(void)	{}
+static inline void cpu_hotplug_enable_after_thaw(void)	{}
 #endif /* CONFIG_SMP */
 extern struct bus_type cpu_subsys;
 
-- 
1.6.4.1

^ permalink raw reply related	[flat|nested] 39+ messages in thread

* [PATCH v8 7/7] powerpc/85xx: add support to JOG feature using cpufreq interface
@ 2012-07-20 12:42   ` Zhao Chenhui
  0 siblings, 0 replies; 39+ messages in thread
From: Zhao Chenhui @ 2012-07-20 12:42 UTC (permalink / raw)
  To: linuxppc-dev, scottwood, galak; +Cc: linux-kernel, leoli

Some 85xx silicons like MPC8536 and P1022 have a JOG feature, which provides
a dynamic mechanism to lower or raise the CPU core clock at runtime.

This patch adds the support to change CPU frequency using the standard
cpufreq interface. The ratio CORE to CCB can be 1:1(except MPC8536), 3:2,
2:1, 5:2, 3:1, 7:2 and 4:1.

Two CPU cores on P1022 must not in the low power state during the frequency
transition. The driver uses a atomic counter to meet the requirement.

The jog mode frequency transition process on the MPC8536 is similar to
the deep sleep process. The driver need save the CPU state and restore
it after CPU warm reset.

Note:
 * The I/O peripherals such as PCIe and eTSEC may lose packets during
   the jog mode frequency transition.
 * The driver doesn't support MPC8536 Rev 1.0 due to a JOG erratum.
   Subsequent revisions of MPC8536 have corrected the erratum.

Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
---
 arch/powerpc/platforms/85xx/Makefile      |    1 +
 arch/powerpc/platforms/85xx/cpufreq-jog.c |  388 +++++++++++++++++++++++++++++
 arch/powerpc/platforms/Kconfig            |   11 +
 arch/powerpc/sysdev/fsl_pmc.c             |    3 +
 arch/powerpc/sysdev/fsl_soc.h             |    2 +
 include/linux/cpu.h                       |    4 +
 6 files changed, 409 insertions(+), 0 deletions(-)
 create mode 100644 arch/powerpc/platforms/85xx/cpufreq-jog.c

diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile
index 405ab79..901cdd5 100644
--- a/arch/powerpc/platforms/85xx/Makefile
+++ b/arch/powerpc/platforms/85xx/Makefile
@@ -4,6 +4,7 @@
 obj-$(CONFIG_SMP) += smp.o
 
 obj-y += common.o sleep.o
+obj-$(CONFIG_MPC85xx_CPUFREQ) += cpufreq-jog.o
 
 obj-$(CONFIG_BSC9131_RDB) += bsc913x_rdb.o
 obj-$(CONFIG_MPC8540_ADS) += mpc85xx_ads.o
diff --git a/arch/powerpc/platforms/85xx/cpufreq-jog.c b/arch/powerpc/platforms/85xx/cpufreq-jog.c
new file mode 100644
index 0000000..ccc0c33
--- /dev/null
+++ b/arch/powerpc/platforms/85xx/cpufreq-jog.c
@@ -0,0 +1,388 @@
+/*
+ * Copyright (C) 2008-2012 Freescale Semiconductor, Inc.
+ * Author: Dave Liu <daveliu@freescale.com>
+ * Modifier: Chenhui Zhao <chenhui.zhao@freescale.com>
+ *
+ * The cpufreq driver is for Freescale 85xx processor,
+ * based on arch/powerpc/platforms/cell/cbe_cpufreq.c
+ * (C) Copyright IBM Deutschland Entwicklung GmbH 2005-2007
+ *	Christian Krafft <krafft@de.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/cpufreq.h>
+#include <linux/of_platform.h>
+#include <linux/suspend.h>
+#include <linux/cpu.h>
+
+#include <asm/prom.h>
+#include <asm/time.h>
+#include <asm/reg.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/smp.h>
+
+#include <sysdev/fsl_soc.h>
+
+static DEFINE_MUTEX(mpc85xx_switch_mutex);
+static void __iomem *guts;
+
+static u32 sysfreq;
+static unsigned int max_pll[2];
+static atomic_t in_jog_process;
+static struct cpufreq_frequency_table *mpc85xx_freqs;
+static int (*set_pll)(unsigned int cpu, unsigned int pll);
+
+static struct cpufreq_frequency_table mpc8536_freqs_table[] = {
+	{3,	0},
+	{4,	0},
+	{5,	0},
+	{6,	0},
+	{7,	0},
+	{8,	0},
+	{0,	CPUFREQ_TABLE_END},
+};
+
+static struct cpufreq_frequency_table p1022_freqs_table[] = {
+	{2,	0},
+	{3,	0},
+	{4,	0},
+	{5,	0},
+	{6,	0},
+	{7,	0},
+	{8,	0},
+	{0,	CPUFREQ_TABLE_END},
+};
+
+#define FREQ_500MHz	500000000
+#define FREQ_800MHz	800000000
+
+#define CORE_RATIO_STRIDE	8
+#define CORE_RATIO_MASK		0x3f
+#define CORE_RATIO_SHIFT	16
+
+#define PORPLLSR	0x0	/* Power-On Reset PLL ratio status register */
+
+#define PMJCR		0x7c	/* Power Management Jog Control Register */
+#define PMJCR_CORE0_SPD	0x00001000
+#define PMJCR_CORE_SPD	0x00002000
+
+#define POWMGTCSR	0x80 /* Power management control and status register */
+#define POWMGTCSR_JOG		0x00200000
+#define POWMGTCSR_INT_MASK	0x00000f00
+
+static void spin_while_jogging(void *dummy)
+{
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	atomic_inc(&in_jog_process);
+
+	while (atomic_read(&in_jog_process) != 0)
+		barrier();
+
+	local_irq_restore(flags);
+}
+
+static int get_pll(int hw_cpu)
+{
+	int shift;
+	u32 val = in_be32(guts + PORPLLSR);
+
+	shift = hw_cpu * CORE_RATIO_STRIDE + CORE_RATIO_SHIFT;
+
+	return (val >> shift) & CORE_RATIO_MASK;
+}
+
+static int mpc8536_set_pll(unsigned int cpu, unsigned int pll)
+{
+	u32 corefreq, val, mask;
+	unsigned int cur_pll = get_pll(0);
+	unsigned long flags;
+
+	if (pll == cur_pll)
+		return 0;
+
+	val = (pll & CORE_RATIO_MASK) << CORE_RATIO_SHIFT;
+
+	corefreq = sysfreq * pll / 2;
+	/*
+	 * Set the COREx_SPD bit if the requested core frequency
+	 * is larger than the threshold frequency.
+	 */
+	if (corefreq > FREQ_800MHz)
+			val |= PMJCR_CORE_SPD;
+
+	mask = (CORE_RATIO_MASK << CORE_RATIO_SHIFT) | PMJCR_CORE_SPD;
+	clrsetbits_be32(guts + PMJCR, mask, val);
+
+	/* readback to sync write */
+	in_be32(guts + PMJCR);
+
+	local_irq_save(flags);
+	mpc85xx_enter_deep_sleep(get_immrbase(), POWMGTCSR_JOG);
+	local_irq_restore(flags);
+
+	/* verify */
+	cur_pll =  get_pll(0);
+	if (cur_pll != pll) {
+		pr_err("%s: error. The current PLL is %d instead of %d.\n",
+				__func__, cur_pll, pll);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int p1022_set_pll(unsigned int cpu, unsigned int pll)
+{
+	int index, hw_cpu = get_hard_smp_processor_id(cpu);
+	int shift;
+	u32 corefreq, val, mask = 0;
+	unsigned int cur_pll = get_pll(hw_cpu);
+	unsigned long flags;
+	int ret = 0;
+
+	if (pll == cur_pll)
+		return 0;
+
+	shift = hw_cpu * CORE_RATIO_STRIDE + CORE_RATIO_SHIFT;
+	val = (pll & CORE_RATIO_MASK) << shift;
+
+	corefreq = sysfreq * pll / 2;
+	/*
+	 * Set the COREx_SPD bit if the requested core frequency
+	 * is larger than the threshold frequency.
+	 */
+	if (corefreq > FREQ_500MHz)
+		val |= PMJCR_CORE0_SPD << hw_cpu;
+
+	mask = (CORE_RATIO_MASK << shift) | (PMJCR_CORE0_SPD << hw_cpu);
+	clrsetbits_be32(guts + PMJCR, mask, val);
+
+	/* readback to sync write */
+	in_be32(guts + PMJCR);
+
+	cpu_hotplug_disable_before_freeze();
+	/*
+	 * A Jog request can not be asserted when any core is in a low
+	 * power state on P1022. Before executing a jog request, any
+	 * core which is in a low power state must be waked by a
+	 * interrupt, and keep waking up until the sequence is
+	 * finished.
+	 */
+	for_each_present_cpu(index) {
+		if (!cpu_online(index)) {
+			cpu_hotplug_enable_after_thaw();
+			pr_err("%s: error, core%d is down.\n", __func__, index);
+			return -1;
+		}
+	}
+
+	atomic_set(&in_jog_process, 0);
+	smp_call_function(spin_while_jogging, NULL, 0);
+
+	local_irq_save(flags);
+
+	/* Wait for the other core to wake. */
+	if (!spin_event_timeout(atomic_read(&in_jog_process) == 1, 1000, 100)) {
+		pr_err("%s: timeout, the other core is not at running state.\n",
+					__func__);
+		ret = -1;
+		goto err;
+	}
+
+	out_be32(guts + POWMGTCSR, POWMGTCSR_JOG | POWMGTCSR_INT_MASK);
+
+	if (!spin_event_timeout(
+		(in_be32(guts + POWMGTCSR) & POWMGTCSR_JOG) == 0, 1000, 100)) {
+		pr_err("%s: timeout, fail to switch the core frequency.\n",
+				__func__);
+		ret = -1;
+		goto err;
+	}
+
+	clrbits32(guts + POWMGTCSR, POWMGTCSR_INT_MASK);
+	in_be32(guts + POWMGTCSR);
+
+	atomic_set(&in_jog_process, 0);
+err:
+	local_irq_restore(flags);
+	cpu_hotplug_enable_after_thaw();
+
+	/* verify */
+	cur_pll =  get_pll(hw_cpu);
+	if (cur_pll != pll) {
+		pr_err("%s: error, the current PLL of core %d is %d instead of %d.\n",
+				__func__, hw_cpu, cur_pll, pll);
+		return -1;
+	}
+
+	return ret;
+}
+
+/*
+ * cpufreq functions
+ */
+static int mpc85xx_cpufreq_cpu_init(struct cpufreq_policy *policy)
+{
+	unsigned int i, cur_pll;
+	int hw_cpu = get_hard_smp_processor_id(policy->cpu);
+
+	if (!cpu_present(policy->cpu))
+		return -ENODEV;
+
+	/* the latency of a transition, the unit is ns */
+	policy->cpuinfo.transition_latency = 2000;
+
+	cur_pll = get_pll(hw_cpu);
+
+	/* initialize frequency table */
+	pr_debug("core%d frequency table:\n", hw_cpu);
+	for (i = 0; mpc85xx_freqs[i].frequency != CPUFREQ_TABLE_END; i++) {
+		if (mpc85xx_freqs[i].index <= max_pll[hw_cpu]) {
+			/* The frequency unit is kHz. */
+			mpc85xx_freqs[i].frequency =
+				(sysfreq * mpc85xx_freqs[i].index / 2) / 1000;
+		} else {
+			mpc85xx_freqs[i].frequency = CPUFREQ_ENTRY_INVALID;
+		}
+
+		pr_debug("%d: %dkHz\n", i, mpc85xx_freqs[i].frequency);
+
+		if (mpc85xx_freqs[i].index == cur_pll)
+			policy->cur = mpc85xx_freqs[i].frequency;
+	}
+	pr_debug("current pll is at %d, and core freq is%d\n",
+			cur_pll, policy->cur);
+
+	cpufreq_frequency_table_get_attr(mpc85xx_freqs, policy->cpu);
+
+	/*
+	 * This ensures that policy->cpuinfo_min
+	 * and policy->cpuinfo_max are set correctly.
+	 */
+	return cpufreq_frequency_table_cpuinfo(policy, mpc85xx_freqs);
+}
+
+static int mpc85xx_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+
+	return 0;
+}
+
+static int mpc85xx_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, mpc85xx_freqs);
+}
+
+static int mpc85xx_cpufreq_target(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct cpufreq_freqs freqs;
+	unsigned int new;
+	int ret = 0;
+
+	if (!set_pll)
+		return -ENODEV;
+
+	cpufreq_frequency_table_target(policy,
+				       mpc85xx_freqs,
+				       target_freq,
+				       relation,
+				       &new);
+
+	freqs.old = policy->cur;
+	freqs.new = mpc85xx_freqs[new].frequency;
+	freqs.cpu = policy->cpu;
+
+	mutex_lock(&mpc85xx_switch_mutex);
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	ret = set_pll(policy->cpu, mpc85xx_freqs[new].index);
+	if (!ret) {
+		pr_info("cpufreq: Setting core%d frequency to %d kHz and PLL ratio to %d:2\n",
+			 policy->cpu, mpc85xx_freqs[new].frequency,
+			 mpc85xx_freqs[new].index);
+
+		ppc_proc_freq = freqs.new * 1000ul;
+	}
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	mutex_unlock(&mpc85xx_switch_mutex);
+
+	return ret;
+}
+
+static struct cpufreq_driver mpc85xx_cpufreq_driver = {
+	.verify		= mpc85xx_cpufreq_verify,
+	.target		= mpc85xx_cpufreq_target,
+	.init		= mpc85xx_cpufreq_cpu_init,
+	.exit		= mpc85xx_cpufreq_cpu_exit,
+	.name		= "mpc85xx-JOG",
+	.owner		= THIS_MODULE,
+	.flags		= CPUFREQ_CONST_LOOPS,
+};
+
+static struct of_device_id mpc85xx_jog_ids[] = {
+	{ .compatible = "fsl,mpc8536-guts", },
+	{ .compatible = "fsl,p1022-guts", },
+	{}
+};
+
+int mpc85xx_jog_probe(void)
+{
+	struct device_node *np;
+	unsigned int svr;
+
+	np = of_find_matching_node(NULL, mpc85xx_jog_ids);
+	if (!np)
+		return -ENODEV;
+
+	guts = of_iomap(np, 0);
+	if (!guts) {
+		of_node_put(np);
+		return -ENODEV;
+	}
+
+	sysfreq = fsl_get_sys_freq();
+
+	if (of_device_is_compatible(np, "fsl,mpc8536-guts")) {
+		svr = mfspr(SPRN_SVR);
+		if ((svr & 0x7fff) == 0x10) {
+			pr_err("MPC8536 Rev 1.0 does not support cpufreq(JOG).\n");
+			of_node_put(np);
+			return -ENODEV;
+		}
+		mpc85xx_freqs = mpc8536_freqs_table;
+		set_pll = mpc8536_set_pll;
+		max_pll[0] = get_pll(0);
+
+	} else if (of_device_is_compatible(np, "fsl,p1022-guts")) {
+		mpc85xx_freqs = p1022_freqs_table;
+		set_pll = p1022_set_pll;
+		max_pll[0] = get_pll(0);
+		max_pll[1] = get_pll(1);
+	}
+
+	pr_info("Freescale MPC85xx cpufreq(JOG) driver\n");
+
+	of_node_put(np);
+	return cpufreq_register_driver(&mpc85xx_cpufreq_driver);
+}
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index a35ca44..7dbd239 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -204,6 +204,17 @@ config CPU_FREQ_PMAC64
 	  This adds support for frequency switching on Apple iMac G5,
 	  and some of the more recent desktop G5 machines as well.
 
+config MPC85xx_CPUFREQ
+	bool "Support for Freescale MPC85xx CPU freq"
+	depends on PPC_85xx && FSL_PMC
+	default n
+	select CPU_FREQ_TABLE
+	help
+	  This adds support for dynamic frequency switching on
+	  Freescale MPC85xx by cpufreq interface. MPC8536 and P1022
+	  have a JOG feature, which provides a dynamic mechanism
+	  to lower or raise the CPU core clock at runtime.
+
 config PPC_PASEMI_CPUFREQ
 	bool "Support for PA Semi PWRficient"
 	depends on PPC_PASEMI
diff --git a/arch/powerpc/sysdev/fsl_pmc.c b/arch/powerpc/sysdev/fsl_pmc.c
index b6c8c8f..b809a1b 100644
--- a/arch/powerpc/sysdev/fsl_pmc.c
+++ b/arch/powerpc/sysdev/fsl_pmc.c
@@ -202,6 +202,9 @@ static int pmc_probe(struct platform_device *pdev)
 
 	suspend_set_ops(&pmc_suspend_ops);
 
+#ifdef CONFIG_MPC85xx_CPUFREQ
+	mpc85xx_jog_probe();
+#endif
 	pr_info("Freescale PMC driver: sleep(standby)%s\n",
 		(pmc_flag & PMC_DEEP_SLEEP) ? ", deep sleep(mem)" : "");
 	return 0;
diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
index b1510ef..25be25c 100644
--- a/arch/powerpc/sysdev/fsl_soc.h
+++ b/arch/powerpc/sysdev/fsl_soc.h
@@ -65,5 +65,7 @@ void fsl_hv_halt(void);
  * code can be compatible with both 32-bit & 36-bit.
  */
 extern void mpc85xx_enter_deep_sleep(u64 ccsrbar, u32 powmgtreq);
+
+extern int mpc85xx_jog_probe(void);
 #endif
 #endif
diff --git a/include/linux/cpu.h b/include/linux/cpu.h
index 2e9b9eb..c1ba260 100644
--- a/include/linux/cpu.h
+++ b/include/linux/cpu.h
@@ -145,6 +145,8 @@ void notify_cpu_starting(unsigned int cpu);
 extern void cpu_maps_update_begin(void);
 extern void cpu_maps_update_done(void);
 
+extern void cpu_hotplug_disable_before_freeze(void);
+extern void cpu_hotplug_enable_after_thaw(void);
 #else	/* CONFIG_SMP */
 
 #define cpu_notifier(fn, pri)	do { (void)(fn); } while (0)
@@ -166,6 +168,8 @@ static inline void cpu_maps_update_done(void)
 {
 }
 
+static inline void cpu_hotplug_disable_before_freeze(void)	{}
+static inline void cpu_hotplug_enable_after_thaw(void)	{}
 #endif /* CONFIG_SMP */
 extern struct bus_type cpu_subsys;
 
-- 
1.6.4.1



^ permalink raw reply related	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 7/7] powerpc/85xx: add support to JOG feature using cpufreq interface
  2012-07-20 12:42   ` Zhao Chenhui
@ 2012-07-31 14:21     ` Kumar Gala
  -1 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:21 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: scottwood, linuxppc-dev, linux-kernel


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> Some 85xx silicons like MPC8536 and P1022 have a JOG feature, which =
provides
> a dynamic mechanism to lower or raise the CPU core clock at runtime.
>=20
> This patch adds the support to change CPU frequency using the standard
> cpufreq interface. The ratio CORE to CCB can be 1:1(except MPC8536), =
3:2,
> 2:1, 5:2, 3:1, 7:2 and 4:1.
>=20
> Two CPU cores on P1022 must not in the low power state during the =
frequency
> transition. The driver uses a atomic counter to meet the requirement.
>=20
> The jog mode frequency transition process on the MPC8536 is similar to
> the deep sleep process. The driver need save the CPU state and restore
> it after CPU warm reset.
>=20
> Note:
> * The I/O peripherals such as PCIe and eTSEC may lose packets during
>   the jog mode frequency transition.
> * The driver doesn't support MPC8536 Rev 1.0 due to a JOG erratum.
>   Subsequent revisions of MPC8536 have corrected the erratum.
>=20
> Signed-off-by: Dave Liu <daveliu@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> CC: Scott Wood <scottwood@freescale.com>
> ---
> arch/powerpc/platforms/85xx/Makefile      |    1 +
> arch/powerpc/platforms/85xx/cpufreq-jog.c |  388 =
+++++++++++++++++++++++++++++
> arch/powerpc/platforms/Kconfig            |   11 +
> arch/powerpc/sysdev/fsl_pmc.c             |    3 +
> arch/powerpc/sysdev/fsl_soc.h             |    2 +
> include/linux/cpu.h                       |    4 +
> 6 files changed, 409 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/platforms/85xx/cpufreq-jog.c

[snip]

> diff --git a/include/linux/cpu.h b/include/linux/cpu.h
> index 2e9b9eb..c1ba260 100644
> --- a/include/linux/cpu.h
> +++ b/include/linux/cpu.h
> @@ -145,6 +145,8 @@ void notify_cpu_starting(unsigned int cpu);
> extern void cpu_maps_update_begin(void);
> extern void cpu_maps_update_done(void);
>=20
> +extern void cpu_hotplug_disable_before_freeze(void);
> +extern void cpu_hotplug_enable_after_thaw(void);
> #else	/* CONFIG_SMP */
>=20
> #define cpu_notifier(fn, pri)	do { (void)(fn); } while (0)
> @@ -166,6 +168,8 @@ static inline void cpu_maps_update_done(void)
> {
> }
>=20
> +static inline void cpu_hotplug_disable_before_freeze(void)	{}
> +static inline void cpu_hotplug_enable_after_thaw(void)	{}
> #endif /* CONFIG_SMP */
> extern struct bus_type cpu_subsys;

Can you pull this change into a separate patch.  I want an ACK by Rafael =
J. Wysocki on it.

- k=

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 7/7] powerpc/85xx: add support to JOG feature using cpufreq interface
@ 2012-07-31 14:21     ` Kumar Gala
  0 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-31 14:21 UTC (permalink / raw)
  To: Zhao Chenhui; +Cc: linuxppc-dev, scottwood, linux-kernel, leoli


On Jul 20, 2012, at 7:42 AM, Zhao Chenhui wrote:

> Some 85xx silicons like MPC8536 and P1022 have a JOG feature, which provides
> a dynamic mechanism to lower or raise the CPU core clock at runtime.
> 
> This patch adds the support to change CPU frequency using the standard
> cpufreq interface. The ratio CORE to CCB can be 1:1(except MPC8536), 3:2,
> 2:1, 5:2, 3:1, 7:2 and 4:1.
> 
> Two CPU cores on P1022 must not in the low power state during the frequency
> transition. The driver uses a atomic counter to meet the requirement.
> 
> The jog mode frequency transition process on the MPC8536 is similar to
> the deep sleep process. The driver need save the CPU state and restore
> it after CPU warm reset.
> 
> Note:
> * The I/O peripherals such as PCIe and eTSEC may lose packets during
>   the jog mode frequency transition.
> * The driver doesn't support MPC8536 Rev 1.0 due to a JOG erratum.
>   Subsequent revisions of MPC8536 have corrected the erratum.
> 
> Signed-off-by: Dave Liu <daveliu@freescale.com>
> Signed-off-by: Li Yang <leoli@freescale.com>
> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
> Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
> CC: Scott Wood <scottwood@freescale.com>
> ---
> arch/powerpc/platforms/85xx/Makefile      |    1 +
> arch/powerpc/platforms/85xx/cpufreq-jog.c |  388 +++++++++++++++++++++++++++++
> arch/powerpc/platforms/Kconfig            |   11 +
> arch/powerpc/sysdev/fsl_pmc.c             |    3 +
> arch/powerpc/sysdev/fsl_soc.h             |    2 +
> include/linux/cpu.h                       |    4 +
> 6 files changed, 409 insertions(+), 0 deletions(-)
> create mode 100644 arch/powerpc/platforms/85xx/cpufreq-jog.c

[snip]

> diff --git a/include/linux/cpu.h b/include/linux/cpu.h
> index 2e9b9eb..c1ba260 100644
> --- a/include/linux/cpu.h
> +++ b/include/linux/cpu.h
> @@ -145,6 +145,8 @@ void notify_cpu_starting(unsigned int cpu);
> extern void cpu_maps_update_begin(void);
> extern void cpu_maps_update_done(void);
> 
> +extern void cpu_hotplug_disable_before_freeze(void);
> +extern void cpu_hotplug_enable_after_thaw(void);
> #else	/* CONFIG_SMP */
> 
> #define cpu_notifier(fn, pri)	do { (void)(fn); } while (0)
> @@ -166,6 +168,8 @@ static inline void cpu_maps_update_done(void)
> {
> }
> 
> +static inline void cpu_hotplug_disable_before_freeze(void)	{}
> +static inline void cpu_hotplug_enable_after_thaw(void)	{}
> #endif /* CONFIG_SMP */
> extern struct bus_type cpu_subsys;

Can you pull this change into a separate patch.  I want an ACK by Rafael J. Wysocki on it.

- k

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 0/7] power management patch set
  2012-07-20 12:42 ` Zhao Chenhui
                   ` (7 preceding siblings ...)
  (?)
@ 2012-07-26 14:02 ` Li Yang
  2012-07-26 17:29     ` Kumar Gala
  2012-07-27  1:43     ` Scott Wood
  -1 siblings, 2 replies; 39+ messages in thread
From: Li Yang @ 2012-07-26 14:02 UTC (permalink / raw)
  To: Zhao Chenhui, scottwood, galak; +Cc: linuxppc-dev, linux-kernel

On Fri, Jul 20, 2012 at 8:42 PM, Zhao Chenhui
<chenhui.zhao@freescale.com> wrote:
> Changes for v8:
> * Separated the cpu hotplug patch into three patches, as follows
>   [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
>   [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
>   [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
>
> * Replaced magic numbers with macros in "[PATCH 5/7] powerpc/85xx: add sleep and deep sleep support"
>
> * no change to the rest of the patch set

Hi Kumar,

How about picking about this series for 3.6?  The review seems to
settle down for this revision.


Hi Scott,

Thanks for the review comments provided.  We'd like to get the ACK
from you for the series if you can.

Regards,
Leo

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 0/7] power management patch set
  2012-07-26 14:02 ` [PATCH v8 0/7] power management patch set Li Yang
@ 2012-07-26 17:29     ` Kumar Gala
  2012-07-27  1:43     ` Scott Wood
  1 sibling, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-26 17:29 UTC (permalink / raw)
  To: Li Yang; +Cc: scottwood, linuxppc-dev, Zhao Chenhui, linux-kernel


On Jul 26, 2012, at 9:02 AM, Li Yang wrote:

> On Fri, Jul 20, 2012 at 8:42 PM, Zhao Chenhui
> <chenhui.zhao@freescale.com> wrote:
>> Changes for v8:
>> * Separated the cpu hotplug patch into three patches, as follows
>> [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace =
macros
>> [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state =
as CPU_UP_PREPARE
>> [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
>>=20
>> * Replaced magic numbers with macros in "[PATCH 5/7] powerpc/85xx: =
add sleep and deep sleep support"
>>=20
>> * no change to the rest of the patch set
>=20
> Hi Kumar,
>=20
> How about picking about this series for 3.6?  The review seems to
> settle down for this revision.

Its too late for 3.6, but will look at queuing it up for 3.7.

> Hi Scott,
>=20
> Thanks for the review comments provided.  We'd like to get the ACK
> from you for the series if you can.
>=20
> Regards,
> Leo

- k=

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 0/7] power management patch set
@ 2012-07-26 17:29     ` Kumar Gala
  0 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-26 17:29 UTC (permalink / raw)
  To: Li Yang; +Cc: Zhao Chenhui, scottwood, linuxppc-dev, linux-kernel


On Jul 26, 2012, at 9:02 AM, Li Yang wrote:

> On Fri, Jul 20, 2012 at 8:42 PM, Zhao Chenhui
> <chenhui.zhao@freescale.com> wrote:
>> Changes for v8:
>> * Separated the cpu hotplug patch into three patches, as follows
>> [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
>> [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
>> [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
>> 
>> * Replaced magic numbers with macros in "[PATCH 5/7] powerpc/85xx: add sleep and deep sleep support"
>> 
>> * no change to the rest of the patch set
> 
> Hi Kumar,
> 
> How about picking about this series for 3.6?  The review seems to
> settle down for this revision.

Its too late for 3.6, but will look at queuing it up for 3.7.

> Hi Scott,
> 
> Thanks for the review comments provided.  We'd like to get the ACK
> from you for the series if you can.
> 
> Regards,
> Leo

- k

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 0/7] power management patch set
  2012-07-26 17:29     ` Kumar Gala
@ 2012-07-27  3:14       ` Li Yang
  -1 siblings, 0 replies; 39+ messages in thread
From: Li Yang @ 2012-07-27  3:14 UTC (permalink / raw)
  To: Kumar Gala; +Cc: scottwood, linuxppc-dev, Zhao Chenhui, linux-kernel

On Fri, Jul 27, 2012 at 1:29 AM, Kumar Gala <galak@kernel.crashing.org> wrote:
>
> On Jul 26, 2012, at 9:02 AM, Li Yang wrote:
>
>> On Fri, Jul 20, 2012 at 8:42 PM, Zhao Chenhui
>> <chenhui.zhao@freescale.com> wrote:
>>> Changes for v8:
>>> * Separated the cpu hotplug patch into three patches, as follows
>>> [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
>>> [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
>>> [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
>>>
>>> * Replaced magic numbers with macros in "[PATCH 5/7] powerpc/85xx: add sleep and deep sleep support"
>>>
>>> * no change to the rest of the patch set
>>
>> Hi Kumar,
>>
>> How about picking about this series for 3.6?  The review seems to
>> settle down for this revision.
>
> Its too late for 3.6, but will look at queuing it up for 3.7.

Too late?  The latest version were submitted on Jul 20 and you are
still picking up other patches today.  :)  I do think the patches have
been floating around for too long time to wait for another release
cycle.  If there are problems, we can work on addressing them in
follow up patches.

Leo

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 0/7] power management patch set
@ 2012-07-27  3:14       ` Li Yang
  0 siblings, 0 replies; 39+ messages in thread
From: Li Yang @ 2012-07-27  3:14 UTC (permalink / raw)
  To: Kumar Gala; +Cc: Zhao Chenhui, scottwood, linuxppc-dev, linux-kernel

On Fri, Jul 27, 2012 at 1:29 AM, Kumar Gala <galak@kernel.crashing.org> wrote:
>
> On Jul 26, 2012, at 9:02 AM, Li Yang wrote:
>
>> On Fri, Jul 20, 2012 at 8:42 PM, Zhao Chenhui
>> <chenhui.zhao@freescale.com> wrote:
>>> Changes for v8:
>>> * Separated the cpu hotplug patch into three patches, as follows
>>> [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
>>> [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
>>> [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
>>>
>>> * Replaced magic numbers with macros in "[PATCH 5/7] powerpc/85xx: add sleep and deep sleep support"
>>>
>>> * no change to the rest of the patch set
>>
>> Hi Kumar,
>>
>> How about picking about this series for 3.6?  The review seems to
>> settle down for this revision.
>
> Its too late for 3.6, but will look at queuing it up for 3.7.

Too late?  The latest version were submitted on Jul 20 and you are
still picking up other patches today.  :)  I do think the patches have
been floating around for too long time to wait for another release
cycle.  If there are problems, we can work on addressing them in
follow up patches.

Leo

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 0/7] power management patch set
  2012-07-27  3:14       ` Li Yang
@ 2012-07-27 21:28         ` Kumar Gala
  -1 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-27 21:28 UTC (permalink / raw)
  To: Li Yang; +Cc: scottwood, linuxppc-dev, Zhao Chenhui, linux-kernel


On Jul 26, 2012, at 10:14 PM, Li Yang wrote:

> On Fri, Jul 27, 2012 at 1:29 AM, Kumar Gala =
<galak@kernel.crashing.org> wrote:
>>=20
>> On Jul 26, 2012, at 9:02 AM, Li Yang wrote:
>>=20
>>> On Fri, Jul 20, 2012 at 8:42 PM, Zhao Chenhui
>>> <chenhui.zhao@freescale.com> wrote:
>>>> Changes for v8:
>>>> * Separated the cpu hotplug patch into three patches, as follows
>>>> [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to =
replace macros
>>>> [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set =
cpu_state as CPU_UP_PREPARE
>>>> [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
>>>>=20
>>>> * Replaced magic numbers with macros in "[PATCH 5/7] powerpc/85xx: =
add sleep and deep sleep support"
>>>>=20
>>>> * no change to the rest of the patch set
>>>=20
>>> Hi Kumar,
>>>=20
>>> How about picking about this series for 3.6?  The review seems to
>>> settle down for this revision.
>>=20
>> Its too late for 3.6, but will look at queuing it up for 3.7.
>=20
> Too late?  The latest version were submitted on Jul 20 and you are
> still picking up other patches today.  :)  I do think the patches have
> been floating around for too long time to wait for another release
> cycle.  If there are problems, we can work on addressing them in
> follow up patches.

That's not how merge windows work.  The patches are merged when they are =
considered complete not when they are first posted.  The other patches =
I've applied are fixes for issues, not new functionality.  The new =
functionality is going into my 'next' branch.

- k

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 0/7] power management patch set
@ 2012-07-27 21:28         ` Kumar Gala
  0 siblings, 0 replies; 39+ messages in thread
From: Kumar Gala @ 2012-07-27 21:28 UTC (permalink / raw)
  To: Li Yang; +Cc: Zhao Chenhui, scottwood, linuxppc-dev, linux-kernel


On Jul 26, 2012, at 10:14 PM, Li Yang wrote:

> On Fri, Jul 27, 2012 at 1:29 AM, Kumar Gala <galak@kernel.crashing.org> wrote:
>> 
>> On Jul 26, 2012, at 9:02 AM, Li Yang wrote:
>> 
>>> On Fri, Jul 20, 2012 at 8:42 PM, Zhao Chenhui
>>> <chenhui.zhao@freescale.com> wrote:
>>>> Changes for v8:
>>>> * Separated the cpu hotplug patch into three patches, as follows
>>>> [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
>>>> [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
>>>> [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
>>>> 
>>>> * Replaced magic numbers with macros in "[PATCH 5/7] powerpc/85xx: add sleep and deep sleep support"
>>>> 
>>>> * no change to the rest of the patch set
>>> 
>>> Hi Kumar,
>>> 
>>> How about picking about this series for 3.6?  The review seems to
>>> settle down for this revision.
>> 
>> Its too late for 3.6, but will look at queuing it up for 3.7.
> 
> Too late?  The latest version were submitted on Jul 20 and you are
> still picking up other patches today.  :)  I do think the patches have
> been floating around for too long time to wait for another release
> cycle.  If there are problems, we can work on addressing them in
> follow up patches.

That's not how merge windows work.  The patches are merged when they are considered complete not when they are first posted.  The other patches I've applied are fixes for issues, not new functionality.  The new functionality is going into my 'next' branch.

- k


^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 0/7] power management patch set
  2012-07-26 14:02 ` [PATCH v8 0/7] power management patch set Li Yang
@ 2012-07-27  1:43     ` Scott Wood
  2012-07-27  1:43     ` Scott Wood
  1 sibling, 0 replies; 39+ messages in thread
From: Scott Wood @ 2012-07-27  1:43 UTC (permalink / raw)
  To: Li Yang; +Cc: linux-kernel, linuxppc-dev, Zhao Chenhui

On 07/26/2012 09:02 AM, Li Yang wrote:
> On Fri, Jul 20, 2012 at 8:42 PM, Zhao Chenhui
> <chenhui.zhao@freescale.com> wrote:
>> Changes for v8:
>> * Separated the cpu hotplug patch into three patches, as follows
>>   [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
>>   [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
>>   [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
>>
>> * Replaced magic numbers with macros in "[PATCH 5/7] powerpc/85xx: add sleep and deep sleep support"
>>
>> * no change to the rest of the patch set
> 
> Hi Kumar,
> 
> How about picking about this series for 3.6?  The review seems to
> settle down for this revision.
> 
> 
> Hi Scott,
> 
> Thanks for the review comments provided.  We'd like to get the ACK
> from you for the series if you can.

I ACKed v7; I assume v8 hasn't made anything worse. :-)

I think it's time to merge this, and deal with any issues as they come up.

-Scott

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [PATCH v8 0/7] power management patch set
@ 2012-07-27  1:43     ` Scott Wood
  0 siblings, 0 replies; 39+ messages in thread
From: Scott Wood @ 2012-07-27  1:43 UTC (permalink / raw)
  To: Li Yang; +Cc: Zhao Chenhui, galak, linuxppc-dev, linux-kernel

On 07/26/2012 09:02 AM, Li Yang wrote:
> On Fri, Jul 20, 2012 at 8:42 PM, Zhao Chenhui
> <chenhui.zhao@freescale.com> wrote:
>> Changes for v8:
>> * Separated the cpu hotplug patch into three patches, as follows
>>   [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros
>>   [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE
>>   [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support
>>
>> * Replaced magic numbers with macros in "[PATCH 5/7] powerpc/85xx: add sleep and deep sleep support"
>>
>> * no change to the rest of the patch set
> 
> Hi Kumar,
> 
> How about picking about this series for 3.6?  The review seems to
> settle down for this revision.
> 
> 
> Hi Scott,
> 
> Thanks for the review comments provided.  We'd like to get the ACK
> from you for the series if you can.

I ACKed v7; I assume v8 hasn't made anything worse. :-)

I think it's time to merge this, and deal with any issues as they come up.

-Scott



^ permalink raw reply	[flat|nested] 39+ messages in thread

end of thread, other threads:[~2012-08-02 11:11 UTC | newest]

Thread overview: 39+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-20 12:42 [PATCH v8 0/7] power management patch set Zhao Chenhui
2012-07-20 12:42 ` Zhao Chenhui
2012-07-20 12:42 ` [PATCH v8 1/7] powerpc/smp: use a struct epapr_spin_table to replace macros Zhao Chenhui
2012-07-20 12:42   ` Zhao Chenhui
2012-07-31 14:24   ` Kumar Gala
2012-07-31 14:24     ` Kumar Gala
2012-07-20 12:42 ` [PATCH v8 2/7] powerpc/smp: add generic_set_cpu_up() to set cpu_state as CPU_UP_PREPARE Zhao Chenhui
2012-07-20 12:42   ` Zhao Chenhui
2012-07-31 14:24   ` Kumar Gala
2012-07-31 14:24     ` Kumar Gala
2012-07-20 12:42 ` [PATCH v8 3/7] powerpc/85xx: implement hardware timebase sync Zhao Chenhui
2012-07-20 12:42   ` Zhao Chenhui
2012-07-31 14:24   ` Kumar Gala
2012-07-31 14:24     ` Kumar Gala
2012-07-20 12:42 ` [PATCH v8 4/7] powerpc/85xx: add HOTPLUG_CPU support Zhao Chenhui
2012-07-20 12:42   ` Zhao Chenhui
2012-07-31 14:24   ` Kumar Gala
2012-07-31 14:24     ` Kumar Gala
2012-07-20 12:42 ` [PATCH v8 5/7] powerpc/85xx: add sleep and deep sleep support Zhao Chenhui
2012-07-20 12:42   ` Zhao Chenhui
2012-07-31 14:15   ` Kumar Gala
2012-07-31 14:15     ` Kumar Gala
2012-08-02 11:12     ` Zhao Chenhui
2012-08-02 11:12       ` Zhao Chenhui
2012-07-20 12:42 ` [PATCH v8 6/7] fsl_pmc: Add API to enable device as wakeup event source Zhao Chenhui
2012-07-20 12:42   ` Zhao Chenhui
2012-07-20 12:42 ` [PATCH v8 7/7] powerpc/85xx: add support to JOG feature using cpufreq interface Zhao Chenhui
2012-07-20 12:42   ` Zhao Chenhui
2012-07-31 14:21   ` Kumar Gala
2012-07-31 14:21     ` Kumar Gala
2012-07-26 14:02 ` [PATCH v8 0/7] power management patch set Li Yang
2012-07-26 17:29   ` Kumar Gala
2012-07-26 17:29     ` Kumar Gala
2012-07-27  3:14     ` Li Yang
2012-07-27  3:14       ` Li Yang
2012-07-27 21:28       ` Kumar Gala
2012-07-27 21:28         ` Kumar Gala
2012-07-27  1:43   ` Scott Wood
2012-07-27  1:43     ` Scott Wood

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.