denzil kernel build issues

All of lore.kernel.org
 help / color / mirror / Atom feed

* denzil kernel build issues
@ 2012-07-30 11:33 Frans Meulenbroeks
  2012-07-30 12:54 ` Bruce Ashfield
  0 siblings, 1 reply; 7+ messages in thread
From: Frans Meulenbroeks @ 2012-07-30 11:33 UTC (permalink / raw)
  To: yocto

[-- Attachment #1: Type: text/plain, Size: 8784 bytes --]

Dear all,

I finally managed to find time to pick up porting my project to denzil and
did encounter two issues that I wanted to report back:

First is that I could not find what the preferred way was to disable a
kernel option in my bsp.
(the option concerned is CONFIG_PM).
Of course I can sed it out in do_configure but I'd hoped it could be simpler
(I have tried:
CONFIG_PM=n
in my config snippet)

Secondly a patch of mine does not seem to apply properly the first time,
but it does apply a second time.
This suggests a race between do_kernel_checkout and do_patch

Below is a log that illustrates this and demonstrates that things are ok
the 2nd time.
(btw I am also a little bit concerned on the command not found messages).
And of course any sugguestion for a fix is greatly appreciated.

Best regards, Frans

frans@frans-desktop:~/poky-denzil-7.0-build$ bitbake virtual/kernel
Parsing recipes: 100%
|######################################################################################################################|
Time: 00:00:30
Parsing of 829 .bb files complete (0 cached, 829 parsed). 1105 targets, 35
skipped, 0 masked, 0 errors.

OE Build Configuration:
BB_VERSION        = "1.15.1"
TARGET_ARCH       = "powerpc"
TARGET_OS         = "linux-uclibc"
MACHINE           = "syrcxx"
DISTRO            = "poky"
DISTRO_VERSION    = "1.2"
TUNE_FEATURES     = "m32 fpu-hard ppce300c3"
TARGET_FPU        = ""
meta
meta-yocto
meta-syrcxx       = "<unknown>:<unknown>"

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Running task 162 of 664 (ID: 6,
/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
do_fetch)
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_fetch: Started
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_fetch: Succeeded
NOTE: Running task 644 of 664 (ID: 2,
/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
do_unpack)
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_unpack: Started
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_unpack: Succeeded
NOTE: Running task 645 of 664 (ID: 1,
/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
do_kernel_checkout)
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_kernel_checkout: Started
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_kernel_checkout: Succeeded
NOTE: Running task 646 of 664 (ID: 0,
/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
do_validate_branches)
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_validate_branches: Started
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_validate_branches: Succeeded
NOTE: Running task 647 of 664 (ID: 3,
/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
do_patch)
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_patch: Started
ERROR: Function failed: do_patch (see
/home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
for further information)
ERROR: Logfile of failure stored in:
/home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
Log data follows:
| Branch meta-temp set up to track remote branch meta from origin.
| Deleted branch meta-temp (was 3499d64).
| warning: could not find (or was already included):
cfg/dmaengine/dmaengine.scc
| warning: could not find (or was already included):
cfg/usb-mass-storage.scc
| warning: could not find (or was already included): cfg/vfat.scc
| warning: could not find (or was already included):
cfg/dmaengine/dmaengine.scc
| warning: could not find (or was already included): user-patches.scc
| ./2-syrcxx-215ef69425ed902858630c959dabd5ce.sco: line 21:
dmaengine_68b329da9893e34099c7d8ad5cb9c940: command not found
| ./2-syrcxx-215ef69425ed902858630c959dabd5ce.sco: line 21:
dmaengine_68b329da9893e34099c7d8ad5cb9c940: command not found
| [INFO] validating against known patches  (syrcxx-fsl-mpc8313e-rdb-meta)
Branch standard/default/syrcxx set up to track remote branch
standard/default/base from origin.
  [##################################ERROR: Function failed: do_patch (see
/home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
for further information)
error: patch failed: drivers/gpio/Makefile:41        ] (-)(76 %)
| error: drivers/gpio/Makefile: patch does not apply
| To force apply this patch, use 'guilt push -f'
| [ERROR] unable to complete push
| pending patches are:
| Patches directory doesn't exist, try guilt-init
| ERROR. could not update git tree
| ERROR. Could not modify standard/default/fsl-mpc8313e-rdb/syrcxx
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_patch: Failed
ERROR: Task 3 (/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/
linux-yocto_3.2.bb, do_patch) failed with exit code '1'
NOTE: Tasks Summary: Attempted 647 tasks of which 642 didn't need to be
rerun and 1 failed.

Summary: 1 task failed:
  /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
do_patch
Summary: There was 1 ERROR message shown, returning a non-zero exit code.
frans@frans-desktop:~/poky-denzil-7.0-build$ ls -l
/home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/linux/drivers/gpio/Makefile

-rw-r--r-- 1 frans frans 2663 2012-07-30 12:27
/home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/linux/drivers/gpio/Makefile
frans@frans-desktop:~/poky-denzil-7.0-build$ bitbake virtual/kernel
Loading cache: 100%
|########################################################################################################################|
ETA:  00:00:00
Loaded 1106 entries from dependency cache.

OE Build Configuration:
BB_VERSION        = "1.15.1"
TARGET_ARCH       = "powerpc"
TARGET_OS         = "linux-uclibc"
MACHINE           = "syrcxx"
DISTRO            = "poky"
DISTRO_VERSION    = "1.2"
TUNE_FEATURES     = "m32 fpu-hard ppce300c3"
TARGET_FPU        = ""
meta
meta-yocto
meta-syrcxx       = "<unknown>:<unknown>"

NOTE: Resolving any missing task queue dependencies
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
NOTE: Running task 241 of 664 (ID: 3,
/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
do_patch)
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_patch: Started
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_patch: Succeeded
NOTE: Running task 648 of 664 (ID: 8,
/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
do_kernel_configme)
NOTE: Running task 649 of 664 (ID: 20,
/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
do_populate_lic)
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_populate_lic: Started
NOTE: package
linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
task do_kernel_configme: Started

[-- Attachment #2: Type: text/html, Size: 9692 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: denzil kernel build issues
  2012-07-30 11:33 denzil kernel build issues Frans Meulenbroeks
@ 2012-07-30 12:54 ` Bruce Ashfield
  2012-07-30 14:20   ` Frans Meulenbroeks
  0 siblings, 1 reply; 7+ messages in thread
From: Bruce Ashfield @ 2012-07-30 12:54 UTC (permalink / raw)
  To: Frans Meulenbroeks; +Cc: yocto

On Mon, Jul 30, 2012 at 7:33 AM, Frans Meulenbroeks
<fransmeulenbroeks@gmail.com> wrote:
> Dear all,
>
> I finally managed to find time to pick up porting my project to denzil and
> did encounter two issues that I wanted to report back:
>
> First is that I could not find what the preferred way was to disable a
> kernel option in my bsp.
> (the option concerned is CONFIG_PM).
> Of course I can sed it out in do_configure but I'd hoped it could be simpler
> (I have tried:
> CONFIG_PM=n
> in my config snippet)

Putting:

# CONFIG_PM is not set

in your configuration fragment will turn off an option, the BSP guide has a
"# CONFIG_SMP is not set" as an example for this.

>
> Secondly a patch of mine does not seem to apply properly the first time, but
> it does apply a second time.
> This suggests a race between do_kernel_checkout and do_patch

There shouldn't be any race ..  if this doesn't work:

   addtask kernel_checkout before do_patch after do_unpack

Then there are some serious problems with bitbake's task scheduling.

If you didn't do a clean between the two runs, the second is
attempting to continue
the patching and you still aren't getting what you want.

Without seeing what you've ported, or a work in progress I can't say exactly
what is wrong, but your meta data is somehow wrong or completely missing.
Have you set any meta or BSP SRCREVs explicitly ?

Cheers,

Bruce

>
> Below is a log that illustrates this and demonstrates that things are ok the
> 2nd time.
> (btw I am also a little bit concerned on the command not found messages).
> And of course any sugguestion for a fix is greatly appreciated.
>
> Best regards, Frans
>
> frans@frans-desktop:~/poky-denzil-7.0-build$ bitbake virtual/kernel
> Parsing recipes: 100%
> |######################################################################################################################|
> Time: 00:00:30
> Parsing of 829 .bb files complete (0 cached, 829 parsed). 1105 targets, 35
> skipped, 0 masked, 0 errors.
>
> OE Build Configuration:
> BB_VERSION        = "1.15.1"
> TARGET_ARCH       = "powerpc"
> TARGET_OS         = "linux-uclibc"
> MACHINE           = "syrcxx"
> DISTRO            = "poky"
> DISTRO_VERSION    = "1.2"
> TUNE_FEATURES     = "m32 fpu-hard ppce300c3"
> TARGET_FPU        = ""
> meta
> meta-yocto
> meta-syrcxx       = "<unknown>:<unknown>"
>
> NOTE: Resolving any missing task queue dependencies
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> NOTE: Running task 162 of 664 (ID: 6,
> /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
> do_fetch)
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_fetch: Started
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_fetch: Succeeded
> NOTE: Running task 644 of 664 (ID: 2,
> /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
> do_unpack)
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_unpack: Started
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_unpack: Succeeded
> NOTE: Running task 645 of 664 (ID: 1,
> /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
> do_kernel_checkout)
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_kernel_checkout: Started
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_kernel_checkout: Succeeded
> NOTE: Running task 646 of 664 (ID: 0,
> /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
> do_validate_branches)
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_validate_branches: Started
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_validate_branches: Succeeded
> NOTE: Running task 647 of 664 (ID: 3,
> /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
> do_patch)
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_patch: Started
> ERROR: Function failed: do_patch (see
> /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
> for further information)
> ERROR: Logfile of failure stored in:
> /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
> Log data follows:
> | Branch meta-temp set up to track remote branch meta from origin.
> | Deleted branch meta-temp (was 3499d64).
> | warning: could not find (or was already included):
> cfg/dmaengine/dmaengine.scc
> | warning: could not find (or was already included):
> cfg/usb-mass-storage.scc
> | warning: could not find (or was already included): cfg/vfat.scc
> | warning: could not find (or was already included):
> cfg/dmaengine/dmaengine.scc
> | warning: could not find (or was already included): user-patches.scc
> | ./2-syrcxx-215ef69425ed902858630c959dabd5ce.sco: line 21:
> dmaengine_68b329da9893e34099c7d8ad5cb9c940: command not found
> | ./2-syrcxx-215ef69425ed902858630c959dabd5ce.sco: line 21:
> dmaengine_68b329da9893e34099c7d8ad5cb9c940: command not found
> | [INFO] validating against known patches  (syrcxx-fsl-mpc8313e-rdb-meta)
> Branch standard/default/syrcxx set up to track remote branch
> standard/default/base from origin.
>   [##################################ERROR: Function failed: do_patch (see
> /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
> for further information)
> error: patch failed: drivers/gpio/Makefile:41        ] (-)(76 %)
> | error: drivers/gpio/Makefile: patch does not apply
> | To force apply this patch, use 'guilt push -f'
> | [ERROR] unable to complete push
> | pending patches are:
> | Patches directory doesn't exist, try guilt-init
> | ERROR. could not update git tree
> | ERROR. Could not modify standard/default/fsl-mpc8313e-rdb/syrcxx
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_patch: Failed
> ERROR: Task 3
> (/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
> do_patch) failed with exit code '1'
> NOTE: Tasks Summary: Attempted 647 tasks of which 642 didn't need to be
> rerun and 1 failed.
>
> Summary: 1 task failed:
>   /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
> do_patch
> Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> frans@frans-desktop:~/poky-denzil-7.0-build$ ls -l
> /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/linux/drivers/gpio/Makefile
> -rw-r--r-- 1 frans frans 2663 2012-07-30 12:27
> /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/linux/drivers/gpio/Makefile
> frans@frans-desktop:~/poky-denzil-7.0-build$ bitbake virtual/kernel
> Loading cache: 100%
> |########################################################################################################################|
> ETA:  00:00:00
> Loaded 1106 entries from dependency cache.
>
> OE Build Configuration:
> BB_VERSION        = "1.15.1"
> TARGET_ARCH       = "powerpc"
> TARGET_OS         = "linux-uclibc"
> MACHINE           = "syrcxx"
> DISTRO            = "poky"
> DISTRO_VERSION    = "1.2"
> TUNE_FEATURES     = "m32 fpu-hard ppce300c3"
> TARGET_FPU        = ""
> meta
> meta-yocto
> meta-syrcxx       = "<unknown>:<unknown>"
>
> NOTE: Resolving any missing task queue dependencies
> NOTE: Preparing runqueue
> NOTE: Executing SetScene Tasks
> NOTE: Executing RunQueue Tasks
> NOTE: Running task 241 of 664 (ID: 3,
> /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
> do_patch)
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_patch: Started
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_patch: Succeeded
> NOTE: Running task 648 of 664 (ID: 8,
> /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
> do_kernel_configme)
> NOTE: Running task 649 of 664 (ID: 20,
> /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb,
> do_populate_lic)
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_populate_lic: Started
> NOTE: package
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> task do_kernel_configme: Started
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto
>



-- 
"Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end"


^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: denzil kernel build issues
  2012-07-30 12:54 ` Bruce Ashfield
@ 2012-07-30 14:20   ` Frans Meulenbroeks
  2012-07-30 17:42     ` Bruce Ashfield
  2012-07-30 20:33     ` Bruce Ashfield
  0 siblings, 2 replies; 7+ messages in thread
From: Frans Meulenbroeks @ 2012-07-30 14:20 UTC (permalink / raw)
  To: Bruce Ashfield, yocto

[-- Attachment #1: Type: text/plain, Size: 12301 bytes --]

Hi Bruce,

Thanks for your support.
See below

2012/7/30 Bruce Ashfield <bruce.ashfield@gmail.com>

> On Mon, Jul 30, 2012 at 7:33 AM, Frans Meulenbroeks
> <fransmeulenbroeks@gmail.com> wrote:
> > Dear all,
> >
> > I finally managed to find time to pick up porting my project to denzil
> and
> > did encounter two issues that I wanted to report back:
> >
> > First is that I could not find what the preferred way was to disable a
> > kernel option in my bsp.
> > (the option concerned is CONFIG_PM).
> > Of course I can sed it out in do_configure but I'd hoped it could be
> simpler
> > (I have tried:
> > CONFIG_PM=n
> > in my config snippet)
>
> Putting:
>
> # CONFIG_PM is not set
>
> in your configuration fragment will turn off an option, the BSP guide has a
> "# CONFIG_SMP is not set" as an example for this.
>

i thought it would and I have had this in my config too, but still it get
switched on. Guess there is something else in my config that sets this.
Will dive into this.

>
> >
> > Secondly a patch of mine does not seem to apply properly the first time,
> but
> > it does apply a second time.
> > This suggests a race between do_kernel_checkout and do_patch
>
> There shouldn't be any race ..  if this doesn't work:
>
>    addtask kernel_checkout before do_patch after do_unpack
>
> Then there are some serious problems with bitbake's task scheduling.
>
> If you didn't do a clean between the two runs, the second is
> attempting to continue
> the patching and you still aren't getting what you want.
>

I did not do a clean inbetween. I figured patch would reattempt to patch
and, since the file is there it would continue.

The addtask line is there in one of the bitbake files.

The odd thing is that the exact same thing builds fine under 3.0.
Actually I was trying to move from 3.0 to 3.2 while stumbling on this.



> Without seeing what you've ported, or a work in progress I can't say
> exactly
> what is wrong, but your meta data is somehow wrong or completely missing.
> Have you set any meta or BSP SRCREVs explicitly ?
>

I have put my work-in-progress in:

https://www.dropbox.com/s/h58h6pq5b0f4u2s/patchproblem.tar.gz vi

you might want to edit conf/layer.conf as it has hardcoded paths.
If I go to meta-syrcxx/conf/machine/syrcxx.conf and set the preferred
kernel version to 3.0 things build fine.
Then I did set to 3.2 and it fails.
Note that apart from a PR bump the files
meta-syrcxx/recipes-kernel/linux/linux-yocto_3.2.bbappend
meta-syrcxx/recipes-kernel/linux/linux-yocto_3.0.bbappend
are identical (and I am just using files; so the same patches apply.

BTW our board is a powerpc 8313e based board (modeled after mpc8313e-rds)

One other thing I noticed; do_install seems to take quite some time; not
sure why this is (haven't investigated).

Best regards, Frans

>
> Cheers,
>
> Bruce
>
> >
> > Below is a log that illustrates this and demonstrates that things are ok
> the
> > 2nd time.
> > (btw I am also a little bit concerned on the command not found messages).
> > And of course any sugguestion for a fix is greatly appreciated.
> >
> > Best regards, Frans
> >
> > frans@frans-desktop:~/poky-denzil-7.0-build$ bitbake virtual/kernel
> > Parsing recipes: 100%
> >
> |######################################################################################################################|
> > Time: 00:00:30
> > Parsing of 829 .bb files complete (0 cached, 829 parsed). 1105 targets,
> 35
> > skipped, 0 masked, 0 errors.
> >
> > OE Build Configuration:
> > BB_VERSION        = "1.15.1"
> > TARGET_ARCH       = "powerpc"
> > TARGET_OS         = "linux-uclibc"
> > MACHINE           = "syrcxx"
> > DISTRO            = "poky"
> > DISTRO_VERSION    = "1.2"
> > TUNE_FEATURES     = "m32 fpu-hard ppce300c3"
> > TARGET_FPU        = ""
> > meta
> > meta-yocto
> > meta-syrcxx       = "<unknown>:<unknown>"
> >
> > NOTE: Resolving any missing task queue dependencies
> > NOTE: Preparing runqueue
> > NOTE: Executing SetScene Tasks
> > NOTE: Executing RunQueue Tasks
> > NOTE: Running task 162 of 664 (ID: 6,
> > /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
> ,
> > do_fetch)
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_fetch: Started
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_fetch: Succeeded
> > NOTE: Running task 644 of 664 (ID: 2,
> > /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
> ,
> > do_unpack)
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_unpack: Started
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_unpack: Succeeded
> > Nmeta-syrcxx/recipes-kernel/linux/linux-yocto_3.2.bbappend
> meta-syrcxx/recipes-kernel/linux/linux-yocto_3.0.bbappendOTE: Running task
> 645 of 664 (ID: 1,
> > /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
> ,
> > do_kernel_checkout)
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_kernel_checkout: Started
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_kernel_checkout: Succeeded
> > NOTE: Running task 646 of 664 (ID: 0,
> > /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
> ,
> > do_validate_branches)
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_validate_branches: Started
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_validate_branches: Succeeded
> > NOTE: Running task 647 of 664 (ID: 3,
> > /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
> ,
> > do_patch)
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_patch: Started
> > ERROR: Function failed: do_patch (see
> >
> /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
> > for further information)
> > ERROR: Logfile of failure stored in:
> >
> /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
> > Log data follows:
> > | Branch meta-temp set up to track remote branch meta from origin.
> > | Deleted branch meta-temp (was 3499d64).
> > | warning: could not find (or was already included):
> > cfg/dmaengine/dmaengine.scc
> > | warning: could not find (or was already included):
> > cfg/usb-mass-storage.scc
> > | warning: could not find (or was already included): cfg/vfat.scc
> > | warning: could not find (or was already included):
> > cfg/dmaengine/dmaengine.scc
> > | warning: could not find (or was already included): user-patches.scc
> > | ./2-syrcxx-215ef69425ed902858630c959dabd5ce.sco: line 21:
> > dmaengine_68b329da9893e34099c7d8ad5cb9c940: command not found
> > | ./2-syrcxx-215ef69425ed902858630c959dabd5ce.sco: line 21:
> > dmaengine_68b329da9893e34099c7d8ad5cb9c940: command not found
> > | [INFO] validating against known patches  (syrcxx-fsl-mpc8313e-rdb-meta)
> > Branch standard/default/syrcxx set up to track remote branch
> > standard/default/base from origin.
> >   [##################################ERROR: Function failed: do_patch
> (see
> >
> /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
> > for further information)
> > error: patch failed: drivers/gpio/Makefile:41        ] (-)(76 %)
> > | error: drivers/gpio/Makefile: patch does not apply
> > | To force apply this patch, use 'guilt push -f'
> > | [ERROR] unable to complete push
> > | pending patches are:
> > | Patches directory doesn't exist, try guilt-init
> > | ERROR. could not update git tree
> > | ERROR. Could not modify standard/default/fsl-mpc8313e-rdb/syrcxx
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_patch: Failed
> > ERROR: Task 3
> > (/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/
> linux-yocto_3.2.bb,
> > do_patch) failed with exit code '1'
> > NOTE: Tasks Summary: Attempted 647 tasks of which 642 didn't need to be
> > rerun and 1 failed.
> >
> > Summary: 1 task failed:
> >   /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/
> linux-yocto_3.2.bb,
> > do_patch
> > Summary: There was 1 ERROR message shown, returning a non-zero exit code.
> > frans@frans-desktop:~/poky-denzil-7.0-build$ ls -l
> >
> /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/linux/drivers/gpio/Makefile
> > -rw-r--r-- 1 frans frans 2663 2012-07-30 12:27
> >
> /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/linux/drivers/gpio/Makefile
> > frans@frans-desktop:~/poky-denzil-7.0-build$ bitbake virtual/kernel
> > Loading cache: 100%
> >
> |########################################################################################################################|
> > ETA:  00:00:00
> > Loaded 1106 entries from dependency cache.
> >
> > OE Build Configuration:
> > BB_VERSION        = "1.15.1"
> > TARGET_ARCH       = "powerpc"
> > TARGET_OS         = "linux-uclibc"
> > MACHINE           = "syrcxx"
> > DISTRO            = "poky"
> > DISTRO_VERSION    = "1.2"
> > TUNE_FEATURES     = "m32 fpu-hard ppce300c3"
> > TARGET_FPU        = ""
> > meta
> > meta-yocto
> > meta-syrcxx       = "<unknown>:<unknown>"
> >
> > NOTE: Resolving any missing task queue dependencies
> > NOTE: Preparing runqueue
> > NOTE: Executing SetScene Tasks
> > NOTE: Executing RunQueue Tasks
> > NOTE: Running task 241 of 664 (ID: 3,
> > /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
> ,
> > do_patch)
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_patch: Started
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_patch: Succeeded
> > NOTE: Running task 648 of 664 (ID: 8,
> > /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
> ,
> > do_kernel_configme)
> > NOTE: Running task 649 of 664 (ID: 20,
> > /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
> ,
> > do_populate_lic)
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_populate_lic: Started
> > NOTE: package
> >
> linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
> > task do_kernel_configme: Started
> >
> >
> > _______________________________________________
> > yocto mailing list
> > yocto@yoctoproject.org
> > https://lists.yoctoproject.org/listinfo/yocto
> >
>
>
>
> --
> "Thou shalt not follow the NULL pointer, for chaos and madness await
> thee at its end"
>

[-- Attachment #2: Type: text/html, Size: 15138 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: denzil kernel build issues
  2012-07-30 14:20   ` Frans Meulenbroeks
@ 2012-07-30 17:42     ` Bruce Ashfield
  2012-07-30 20:11       ` Frans Meulenbroeks
  2012-07-30 20:33     ` Bruce Ashfield
  1 sibling, 1 reply; 7+ messages in thread
From: Bruce Ashfield @ 2012-07-30 17:42 UTC (permalink / raw)
  To: Frans Meulenbroeks; +Cc: yocto

On 12-07-30 10:20 AM, Frans Meulenbroeks wrote:
> Hi Bruce,
>
> Thanks for your support.
> See below
>
> 2012/7/30 Bruce Ashfield <bruce.ashfield@gmail.com
> <mailto:bruce.ashfield@gmail.com>>
>
>     On Mon, Jul 30, 2012 at 7:33 AM, Frans Meulenbroeks
>     <fransmeulenbroeks@gmail.com <mailto:fransmeulenbroeks@gmail.com>>
>     wrote:
>      > Dear all,
>      >
>      > I finally managed to find time to pick up porting my project to
>     denzil and
>      > did encounter two issues that I wanted to report back:
>      >
>      > First is that I could not find what the preferred way was to
>     disable a
>      > kernel option in my bsp.
>      > (the option concerned is CONFIG_PM).
>      > Of course I can sed it out in do_configure but I'd hoped it could
>     be simpler
>      > (I have tried:
>      > CONFIG_PM=n
>      > in my config snippet)
>
>     Putting:
>
>     # CONFIG_PM is not set
>
>     in your configuration fragment will turn off an option, the BSP
>     guide has a
>     "# CONFIG_SMP is not set" as an example for this.
>
>
> i thought it would and I have had this in my config too, but still it
> get switched on. Guess there is something else in my config that sets this.
> Will dive into this.
>
>
>      >
>      > Secondly a patch of mine does not seem to apply properly the
>     first time, but
>      > it does apply a second time.
>      > This suggests a race between do_kernel_checkout and do_patch
>
>     There shouldn't be any race .. if this doesn't work:
>
>     addtask kernel_checkout before do_patch after do_unpack
>
>     Then there are some serious problems with bitbake's task scheduling.
>
>     If you didn't do a clean between the two runs, the second is
>     attempting to continue
>     the patching and you still aren't getting what you want.
>
>
> I did not do a clean inbetween. I figured patch would reattempt to patch
> and, since the file is there it would continue.
>
> The addtask line is there in one of the bitbake files.
>
> The odd thing is that the exact same thing builds fine under 3.0.
> Actually I was trying to move from 3.0 to 3.2 while stumbling on this.
>
>
>
>     Without seeing what you've ported, or a work in progress I can't say
>     exactly
>     what is wrong, but your meta data is somehow wrong or completely
>     missing.
>     Have you set any meta or BSP SRCREVs explicitly ?
>
>
> I have put my work-in-progress in:
>
> https://www.dropbox.com/s/h58h6pq5b0f4u2s/patchproblem.tar.gz vi
>
> you might want to edit conf/layer.conf as it has hardcoded paths.
> If I go to meta-syrcxx/conf/machine/syrcxx.conf and set the preferred
> kernel version to 3.0 things build fine.
> Then I did set to 3.2 and it fails.

I'll give this a try, sounds like a typical patch/meta issue, so I should
see it quickly.

> Note that apart from a PR bump the files
> meta-syrcxx/recipes-kernel/linux/linux-yocto_3.2.bbappend
> meta-syrcxx/recipes-kernel/linux/linux-yocto_3.0.bbappend
> are identical (and I am just using files; so the same patches apply.
>
> BTW our board is a powerpc 8313e based board (modeled after mpc8313e-rds)
>
> One other thing I noticed; do_install seems to take quite some time; not
> sure why this is (haven't investigated).

hmm. normally that means some sort of rpm issue (or maybe you are
using ipk), but it can take a significant time.

Cheers,

Bruce

>
> Best regards, Frans
>
>
>     Cheers,
>
>     Bruce
>
>      >
>      > Below is a log that illustrates this and demonstrates that things
>     are ok the
>      > 2nd time.
>      > (btw I am also a little bit concerned on the command not found
>     messages).
>      > And of course any sugguestion for a fix is greatly appreciated.
>      >
>      > Best regards, Frans
>      >
>      > frans@frans-desktop:~/poky-denzil-7.0-build$ bitbake virtual/kernel
>      > Parsing recipes: 100%
>      >
>     |######################################################################################################################|
>      > Time: 00:00:30
>      > Parsing of 829 .bb files complete (0 cached, 829 parsed). 1105
>     targets, 35
>      > skipped, 0 masked, 0 errors.
>      >
>      > OE Build Configuration:
>      > BB_VERSION = "1.15.1"
>      > TARGET_ARCH = "powerpc"
>      > TARGET_OS = "linux-uclibc"
>      > MACHINE = "syrcxx"
>      > DISTRO = "poky"
>      > DISTRO_VERSION = "1.2"
>      > TUNE_FEATURES = "m32 fpu-hard ppce300c3"
>      > TARGET_FPU = ""
>      > meta
>      > meta-yocto
>      > meta-syrcxx = "<unknown>:<unknown>"
>      >
>      > NOTE: Resolving any missing task queue dependencies
>      > NOTE: Preparing runqueue
>      > NOTE: Executing SetScene Tasks
>      > NOTE: Executing RunQueue Tasks
>      > NOTE: Running task 162 of 664 (ID: 6,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_fetch)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_fetch: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_fetch: Succeeded
>      > NOTE: Running task 644 of 664 (ID: 2,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_unpack)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_unpack: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_unpack: Succeeded
>      > Nmeta-syrcxx/recipes-kernel/linux/linux-yocto_3.2.bbappend
>     meta-syrcxx/recipes-kernel/linux/linux-yocto_3.0.bbappendOTE:
>     Running task 645 of 664 (ID: 1,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_kernel_checkout)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_kernel_checkout: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_kernel_checkout: Succeeded
>      > NOTE: Running task 646 of 664 (ID: 0,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_validate_branches)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_validate_branches: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_validate_branches: Succeeded
>      > NOTE: Running task 647 of 664 (ID: 3,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_patch)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_patch: Started
>      > ERROR: Function failed: do_patch (see
>      >
>     /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
>      > for further information)
>      > ERROR: Logfile of failure stored in:
>      >
>     /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
>      > Log data follows:
>      > | Branch meta-temp set up to track remote branch meta from origin.
>      > | Deleted branch meta-temp (was 3499d64).
>      > | warning: could not find (or was already included):
>      > cfg/dmaengine/dmaengine.scc
>      > | warning: could not find (or was already included):
>      > cfg/usb-mass-storage.scc
>      > | warning: could not find (or was already included): cfg/vfat.scc
>      > | warning: could not find (or was already included):
>      > cfg/dmaengine/dmaengine.scc
>      > | warning: could not find (or was already included): user-patches.scc
>      > | ./2-syrcxx-215ef69425ed902858630c959dabd5ce.sco: line 21:
>      > dmaengine_68b329da9893e34099c7d8ad5cb9c940: command not found
>      > | ./2-syrcxx-215ef69425ed902858630c959dabd5ce.sco: line 21:
>      > dmaengine_68b329da9893e34099c7d8ad5cb9c940: command not found
>      > | [INFO] validating against known patches
>     (syrcxx-fsl-mpc8313e-rdb-meta)
>      > Branch standard/default/syrcxx set up to track remote branch
>      > standard/default/base from origin.
>      > [##################################ERROR: Function failed:
>     do_patch (see
>      >
>     /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
>      > for further information)
>      > error: patch failed: drivers/gpio/Makefile:41 ] (-)(76 %)
>      > | error: drivers/gpio/Makefile: patch does not apply
>      > | To force apply this patch, use 'guilt push -f'
>      > | [ERROR] unable to complete push
>      > | pending patches are:
>      > | Patches directory doesn't exist, try guilt-init
>      > | ERROR. could not update git tree
>      > | ERROR. Could not modify standard/default/fsl-mpc8313e-rdb/syrcxx
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_patch: Failed
>      > ERROR: Task 3
>      >
>     (/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_patch) failed with exit code '1'
>      > NOTE: Tasks Summary: Attempted 647 tasks of which 642 didn't need
>     to be
>      > rerun and 1 failed.
>      >
>      > Summary: 1 task failed:
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_patch
>      > Summary: There was 1 ERROR message shown, returning a non-zero
>     exit code.
>      > frans@frans-desktop:~/poky-denzil-7.0-build$ ls -l
>      >
>     /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/linux/drivers/gpio/Makefile
>      > -rw-r--r-- 1 frans frans 2663 2012-07-30 12:27
>      >
>     /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/linux/drivers/gpio/Makefile
>      > frans@frans-desktop:~/poky-denzil-7.0-build$ bitbake virtual/kernel
>      > Loading cache: 100%
>      >
>     |########################################################################################################################|
>      > ETA: 00:00:00
>      > Loaded 1106 entries from dependency cache.
>      >
>      > OE Build Configuration:
>      > BB_VERSION = "1.15.1"
>      > TARGET_ARCH = "powerpc"
>      > TARGET_OS = "linux-uclibc"
>      > MACHINE = "syrcxx"
>      > DISTRO = "poky"
>      > DISTRO_VERSION = "1.2"
>      > TUNE_FEATURES = "m32 fpu-hard ppce300c3"
>      > TARGET_FPU = ""
>      > meta
>      > meta-yocto
>      > meta-syrcxx = "<unknown>:<unknown>"
>      >
>      > NOTE: Resolving any missing task queue dependencies
>      > NOTE: Preparing runqueue
>      > NOTE: Executing SetScene Tasks
>      > NOTE: Executing RunQueue Tasks
>      > NOTE: Running task 241 of 664 (ID: 3,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_patch)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_patch: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_patch: Succeeded
>      > NOTE: Running task 648 of 664 (ID: 8,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_kernel_configme)
>      > NOTE: Running task 649 of 664 (ID: 20,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_populate_lic)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_populate_lic: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_kernel_configme: Started
>      >
>      >
>      > _______________________________________________
>      > yocto mailing list
>      > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>
>      > https://lists.yoctoproject.org/listinfo/yocto
>      >
>
>
>
>     --
>     "Thou shalt not follow the NULL pointer, for chaos and madness await
>     thee at its end"
>
>
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: denzil kernel build issues
  2012-07-30 17:42     ` Bruce Ashfield
@ 2012-07-30 20:11       ` Frans Meulenbroeks
  0 siblings, 0 replies; 7+ messages in thread
From: Frans Meulenbroeks @ 2012-07-30 20:11 UTC (permalink / raw)
  To: Bruce Ashfield; +Cc: yocto

[-- Attachment #1: Type: text/plain, Size: 16380 bytes --]

2012/7/30 Bruce Ashfield <bruce.ashfield@windriver.com>

> On 12-07-30 10:20 AM, Frans Meulenbroeks wrote:
>
>> Hi Bruce,
>>
>> Thanks for your support.
>> See below
>>
>> 2012/7/30 Bruce Ashfield <bruce.ashfield@gmail.com
>> <mailto:bruce.ashfield@gmail.**com <bruce.ashfield@gmail.com>>>
>>
>>
>>     On Mon, Jul 30, 2012 at 7:33 AM, Frans Meulenbroeks
>>     <fransmeulenbroeks@gmail.com <mailto:fransmeulenbroeks@**gmail.com<fransmeulenbroeks@gmail.com>
>> >>
>>
>>     wrote:
>>      > Dear all,
>>      >
>>      > I finally managed to find time to pick up porting my project to
>>     denzil and
>>      > did encounter two issues that I wanted to report back:
>>      >
>>      > First is that I could not find what the preferred way was to
>>     disable a
>>      > kernel option in my bsp.
>>      > (the option concerned is CONFIG_PM).
>>      > Of course I can sed it out in do_configure but I'd hoped it could
>>     be simpler
>>      > (I have tried:
>>      > CONFIG_PM=n
>>      > in my config snippet)
>>
>>     Putting:
>>
>>     # CONFIG_PM is not set
>>
>>     in your configuration fragment will turn off an option, the BSP
>>     guide has a
>>     "# CONFIG_SMP is not set" as an example for this.
>>
>>
>> i thought it would and I have had this in my config too, but still it
>> get switched on. Guess there is something else in my config that sets
>> this.
>> Will dive into this.
>>
>>
>>      >
>>      > Secondly a patch of mine does not seem to apply properly the
>>     first time, but
>>      > it does apply a second time.
>>      > This suggests a race between do_kernel_checkout and do_patch
>>
>>     There shouldn't be any race .. if this doesn't work:
>>
>>     addtask kernel_checkout before do_patch after do_unpack
>>
>>     Then there are some serious problems with bitbake's task scheduling.
>>
>>     If you didn't do a clean between the two runs, the second is
>>     attempting to continue
>>     the patching and you still aren't getting what you want.
>>
>>
>> I did not do a clean inbetween. I figured patch would reattempt to patch
>> and, since the file is there it would continue.
>>
>> The addtask line is there in one of the bitbake files.
>>
>> The odd thing is that the exact same thing builds fine under 3.0.
>> Actually I was trying to move from 3.0 to 3.2 while stumbling on this.
>>
>>
>>
>>     Without seeing what you've ported, or a work in progress I can't say
>>     exactly
>>     what is wrong, but your meta data is somehow wrong or completely
>>     missing.
>>     Have you set any meta or BSP SRCREVs explicitly ?
>>
>>
>> I have put my work-in-progress in:
>>
>> https://www.dropbox.com/s/**h58h6pq5b0f4u2s/patchproblem.**tar.gz<https://www.dropbox.com/s/h58h6pq5b0f4u2s/patchproblem.tar.gz>vi
>>
>> you might want to edit conf/layer.conf as it has hardcoded paths.
>> If I go to meta-syrcxx/conf/machine/**syrcxx.conf and set the preferred
>> kernel version to 3.0 things build fine.
>> Then I did set to 3.2 and it fails.
>>
>
> I'll give this a try, sounds like a typical patch/meta issue, so I should
> see it quickly.


Thanks a lot. The file that it wants to patch is there. I can imagine a
patch fault as I am just bringing this over from 3.0 but would have
expected a different message.

>
>
>  Note that apart from a PR bump the files
>> meta-syrcxx/recipes-kernel/**linux/linux-yocto_3.2.bbappend
>> meta-syrcxx/recipes-kernel/**linux/linux-yocto_3.0.bbappend
>> are identical (and I am just using files; so the same patches apply.
>>
>> BTW our board is a powerpc 8313e based board (modeled after mpc8313e-rds)
>>
>> One other thing I noticed; do_install seems to take quite some time; not
>> sure why this is (haven't investigated).
>>
>
> hmm. normally that means some sort of rpm issue (or maybe you are
> using ipk), but it can take a significant time.
>

I'm using rpm afaik (didn't change it)
if ipk is faster I can move over (we do not want to use updates, we always
only ship complete images as we then can test what the customer gets)
my host is ubuntu 10.04 if that matters (yeah, I know, it is old, company
preferred etc)

Best regards, Frans

>
> Cheers,
>
> Bruce
>
>
>> Best regards, Frans
>>
>>
>>     Cheers,
>>
>>     Bruce
>>
>>      >
>>      > Below is a log that illustrates this and demonstrates that things
>>     are ok the
>>      > 2nd time.
>>      > (btw I am also a little bit concerned on the command not found
>>     messages).
>>      > And of course any sugguestion for a fix is greatly appreciated.
>>      >
>>      > Best regards, Frans
>>      >
>>      > frans@frans-desktop:~/poky-**denzil-7.0-build$ bitbake
>> virtual/kernel
>>      > Parsing recipes: 100%
>>      >
>>     |#############################**##############################**
>> ##############################**#############################|
>>      > Time: 00:00:30
>>      > Parsing of 829 .bb files complete (0 cached, 829 parsed). 1105
>>     targets, 35
>>      > skipped, 0 masked, 0 errors.
>>      >
>>      > OE Build Configuration:
>>      > BB_VERSION = "1.15.1"
>>      > TARGET_ARCH = "powerpc"
>>      > TARGET_OS = "linux-uclibc"
>>      > MACHINE = "syrcxx"
>>      > DISTRO = "poky"
>>      > DISTRO_VERSION = "1.2"
>>      > TUNE_FEATURES = "m32 fpu-hard ppce300c3"
>>      > TARGET_FPU = ""
>>      > meta
>>      > meta-yocto
>>      > meta-syrcxx = "<unknown>:<unknown>"
>>      >
>>      > NOTE: Resolving any missing task queue dependencies
>>      > NOTE: Preparing runqueue
>>      > NOTE: Executing SetScene Tasks
>>      > NOTE: Executing RunQueue Tasks
>>      > NOTE: Running task 162 of 664 (ID: 6,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_fetch)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_fetch: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_fetch: Succeeded
>>      > NOTE: Running task 644 of 664 (ID: 2,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_unpack)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_unpack: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_unpack: Succeeded
>>      > Nmeta-syrcxx/recipes-kernel/**linux/linux-yocto_3.2.bbappend
>>     meta-syrcxx/recipes-kernel/**linux/linux-yocto_3.0.**bbappendOTE:
>>     Running task 645 of 664 (ID: 1,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_kernel_checkout)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_kernel_checkout: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_kernel_checkout: Succeeded
>>      > NOTE: Running task 646 of 664 (ID: 0,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_validate_branches)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_validate_branches: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_validate_branches: Succeeded
>>      > NOTE: Running task 647 of 664 (ID: 3,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_patch)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_patch: Started
>>      > ERROR: Function failed: do_patch (see
>>      >
>>     /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-**
>> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**
>> 93a1a2880a-r1.81/temp/log.do_**patch.27211
>>      > for further information)
>>      > ERROR: Logfile of failure stored in:
>>      >
>>     /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-**
>> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**
>> 93a1a2880a-r1.81/temp/log.do_**patch.27211
>>      > Log data follows:
>>      > | Branch meta-temp set up to track remote branch meta from origin.
>>      > | Deleted branch meta-temp (was 3499d64).
>>      > | warning: could not find (or was already included):
>>      > cfg/dmaengine/dmaengine.scc
>>      > | warning: could not find (or was already included):
>>      > cfg/usb-mass-storage.scc
>>      > | warning: could not find (or was already included): cfg/vfat.scc
>>      > | warning: could not find (or was already included):
>>      > cfg/dmaengine/dmaengine.scc
>>      > | warning: could not find (or was already included):
>> user-patches.scc
>>      > | ./2-syrcxx-**215ef69425ed902858630c959dabd5**ce.sco: line 21:
>>      > dmaengine_**68b329da9893e34099c7d8ad5cb9c9**40: command not found
>>      > | ./2-syrcxx-**215ef69425ed902858630c959dabd5**ce.sco: line 21:
>>      > dmaengine_**68b329da9893e34099c7d8ad5cb9c9**40: command not found
>>      > | [INFO] validating against known patches
>>     (syrcxx-fsl-mpc8313e-rdb-meta)
>>      > Branch standard/default/syrcxx set up to track remote branch
>>      > standard/default/base from origin.
>>      > [#############################**#####ERROR: Function failed:
>>     do_patch (see
>>      >
>>     /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-**
>> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**
>> 93a1a2880a-r1.81/temp/log.do_**patch.27211
>>      > for further information)
>>      > error: patch failed: drivers/gpio/Makefile:41 ] (-)(76 %)
>>      > | error: drivers/gpio/Makefile: patch does not apply
>>      > | To force apply this patch, use 'guilt push -f'
>>      > | [ERROR] unable to complete push
>>      > | pending patches are:
>>      > | Patches directory doesn't exist, try guilt-init
>>      > | ERROR. could not update git tree
>>      > | ERROR. Could not modify standard/default/fsl-mpc8313e-**
>> rdb/syrcxx
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_patch: Failed
>>      > ERROR: Task 3
>>      >
>>     (/home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_patch) failed with exit code '1'
>>      > NOTE: Tasks Summary: Attempted 647 tasks of which 642 didn't need
>>     to be
>>      > rerun and 1 failed.
>>      >
>>      > Summary: 1 task failed:
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_patch
>>      > Summary: There was 1 ERROR message shown, returning a non-zero
>>     exit code.
>>      > frans@frans-desktop:~/poky-**denzil-7.0-build$ ls -l
>>      >
>>     /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-**
>> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81/linux/**
>> drivers/gpio/Makefile
>>      > -rw-r--r-- 1 frans frans 2663 2012-07-30 12:27
>>      >
>>     /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-**
>> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81/linux/**
>> drivers/gpio/Makefile
>>      > frans@frans-desktop:~/poky-**denzil-7.0-build$ bitbake
>> virtual/kernel
>>      > Loading cache: 100%
>>      >
>>     |#############################**##############################**
>> ##############################**##############################**#|
>>      > ETA: 00:00:00
>>      > Loaded 1106 entries from dependency cache.
>>      >
>>      > OE Build Configuration:
>>      > BB_VERSION = "1.15.1"
>>      > TARGET_ARCH = "powerpc"
>>      > TARGET_OS = "linux-uclibc"
>>      > MACHINE = "syrcxx"
>>      > DISTRO = "poky"
>>      > DISTRO_VERSION = "1.2"
>>      > TUNE_FEATURES = "m32 fpu-hard ppce300c3"
>>      > TARGET_FPU = ""
>>      > meta
>>      > meta-yocto
>>      > meta-syrcxx = "<unknown>:<unknown>"
>>      >
>>      > NOTE: Resolving any missing task queue dependencies
>>      > NOTE: Preparing runqueue
>>      > NOTE: Executing SetScene Tasks
>>      > NOTE: Executing RunQueue Tasks
>>      > NOTE: Running task 241 of 664 (ID: 3,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_patch)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_patch: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_patch: Succeeded
>>      > NOTE: Running task 648 of 664 (ID: 8,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_kernel_configme)
>>      > NOTE: Running task 649 of 664 (ID: 20,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_populate_lic)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_populate_lic: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_kernel_configme: Started
>>      >
>>      >
>>      > ______________________________**_________________
>>      > yocto mailing list
>>      > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org**>
>>
>>      > https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>
>>      >
>>
>>
>>
>>     --
>>     "Thou shalt not follow the NULL pointer, for chaos and madness await
>>     thee at its end"
>>
>>
>>
>>
>> ______________________________**_________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>
>>
>
>

[-- Attachment #2: Type: text/html, Size: 20821 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: denzil kernel build issues
  2012-07-30 14:20   ` Frans Meulenbroeks
  2012-07-30 17:42     ` Bruce Ashfield
@ 2012-07-30 20:33     ` Bruce Ashfield
  2012-07-30 21:32       ` Frans Meulenbroeks
  1 sibling, 1 reply; 7+ messages in thread
From: Bruce Ashfield @ 2012-07-30 20:33 UTC (permalink / raw)
  To: Frans Meulenbroeks; +Cc: yocto

On 12-07-30 10:20 AM, Frans Meulenbroeks wrote:
> Hi Bruce,
>
> Thanks for your support.
> See below
>
> 2012/7/30 Bruce Ashfield <bruce.ashfield@gmail.com
> <mailto:bruce.ashfield@gmail.com>>
>
>     On Mon, Jul 30, 2012 at 7:33 AM, Frans Meulenbroeks
>     <fransmeulenbroeks@gmail.com <mailto:fransmeulenbroeks@gmail.com>>
>     wrote:
>      > Dear all,
>      >
>      > I finally managed to find time to pick up porting my project to
>     denzil and
>      > did encounter two issues that I wanted to report back:
>      >
>      > First is that I could not find what the preferred way was to
>     disable a
>      > kernel option in my bsp.
>      > (the option concerned is CONFIG_PM).
>      > Of course I can sed it out in do_configure but I'd hoped it could
>     be simpler
>      > (I have tried:
>      > CONFIG_PM=n
>      > in my config snippet)
>
>     Putting:
>
>     # CONFIG_PM is not set
>
>     in your configuration fragment will turn off an option, the BSP
>     guide has a
>     "# CONFIG_SMP is not set" as an example for this.
>
>
> i thought it would and I have had this in my config too, but still it
> get switched on. Guess there is something else in my config that sets this.
> Will dive into this.
>
>
>      >
>      > Secondly a patch of mine does not seem to apply properly the
>     first time, but
>      > it does apply a second time.
>      > This suggests a race between do_kernel_checkout and do_patch
>
>     There shouldn't be any race .. if this doesn't work:
>
>     addtask kernel_checkout before do_patch after do_unpack
>
>     Then there are some serious problems with bitbake's task scheduling.
>
>     If you didn't do a clean between the two runs, the second is
>     attempting to continue
>     the patching and you still aren't getting what you want.
>
>
> I did not do a clean inbetween. I figured patch would reattempt to patch
> and, since the file is there it would continue.
>
> The addtask line is there in one of the bitbake files.
>
> The odd thing is that the exact same thing builds fine under 3.0.
> Actually I was trying to move from 3.0 to 3.2 while stumbling on this.
>
>
>
>     Without seeing what you've ported, or a work in progress I can't say
>     exactly
>     what is wrong, but your meta data is somehow wrong or completely
>     missing.
>     Have you set any meta or BSP SRCREVs explicitly ?
>
>
> I have put my work-in-progress in:
>
> https://www.dropbox.com/s/h58h6pq5b0f4u2s/patchproblem.tar.gz vi
>
> you might want to edit conf/layer.conf as it has hardcoded paths.
> If I go to meta-syrcxx/conf/machine/syrcxx.conf and set the preferred
> kernel version to 3.0 things build fine.
> Then I did set to 3.2 and it fails.
> Note that apart from a PR bump the files
> meta-syrcxx/recipes-kernel/linux/linux-yocto_3.2.bbappend
> meta-syrcxx/recipes-kernel/linux/linux-yocto_3.0.bbappend
> are identical (and I am just using files; so the same patches apply.

You've got a couple of minor problems in the files. dmaengine is
incorrectly referenced for 3.2. I've attached a fix for that. The
other items are just warnings..

I have fixes to make that bad configuration reference a hard error,
with a message during do_patch that high lights the problem .. for
master. But in denzil, what you got is what I'd expect.

Your max7311.patch also needs to be refreshed for 3.2, since it won't
apply as is.

After the failure, I refreshed it as follows:


  > bitbake -c devshell linux-yocto

# in dev-shell:

  # already fixed in master, but denzil requires this:
  > export GUILT_BASE=meta
  > guilt next
links/files/max7311.patch
  > guilt push -f
  # resolve conflict in drivers/gpio/Makefile
  > git add drivers/gpio/Makefile drivers/gpio/max7311.c 
include/linux/max7311_gpio.h
  > git clean -f
Removing drivers/gpio/Makefile.rej
  > git tag standard/default/syrcxx_top
  > guilt refresh
Patch links/files/max7311.patch refreshed

  > cp meta/patches/standard/default/syrcxx/links/files/max7311.patch 
$your_layer_location/meta-syrcxx/recipes-kernel/linux/files

  > guilt push -a
Applying patch..links/files/axonbus-remote.patch
Patch applied.
Applying patch..links/files/axonbus-local.patch
Patch applied.
Applying patch..links/files/axon-display.patch
Patch applied.
Applying patch..links/files/axon-keyboard.patch
Patch applied.
Applying patch..links/files/axon-hwmon.patch
Patch applied.

  # the series is now clean.

I then cleaned linux-yocto and restarted, it configures and builds
after that (and eventually gets a build error, but that looks like an
issue with the code on the 3.2 kernel .. and is for someone else to
fix :)

As for the CONFIG_PM, it's a Kconfig "feature" that is causing you
pain. You can't directly "access" (enable/disable) and option that
doesn't have help text, since the help text makes it "user visible"
and hence a configuration knob. (Don't blame me, I don't condone this,
but it is what it is). In this case you need to blast one of the 
dependencies
to disable it. I turned off CONFIG_SUSPEND to get CONFIG_PM out of
my final.config.

I inlined my three changes here, the last one is the patch refresh
for drivers/Kconfig, so it's not all that useful :)

Cheers,

Bruce


-------------------------


 > diff -u syrcxx.cfg.orig syrcxx.cfg
--- syrcxx.cfg.orig     2012-07-30 16:02:20.374008667 -0400
+++ syrcxx.cfg  2012-07-30 16:23:04.364007467 -0400
@@ -304,7 +304,7 @@
  CONFIG_FORCE_MAX_ZONEORDER=11
  # CONFIG_CMDLINE_BOOL is not set
  CONFIG_EXTRA_TARGETS=""
-CONFIG_PM=n
+# CONFIG_SUSPEND is not set
  # CONFIG_SECCOMP is not set
  CONFIG_ISA_DMA_API=y
  #
yow-bashfiel-d2 [/home/bruc...inux/files]> diff -u syrcxx.scc.orig 
syrcxx.scc
--- syrcxx.scc.orig     2012-07-30 15:16:22.374007496 -0400
+++ syrcxx.scc  2012-07-30 15:17:01.284008083 -0400
@@ -2,7 +2,7 @@

  include cfg/usb-mass-storage.scc
  include cfg/vfat.scc
-include cfg/dmaengine/dmaengine.scc
+include cfg/dmaengine.scc

  kconf hardware user-config.cfg
  include user-patches.scc
yow-bashfiel-d2 [/home/bruc...inux/files]> diff -u max7311.patch.orig 
max7311.patch
--- max7311.patch.orig  2012-07-30 15:18:55.963930827 -0400
+++ max7311.patch       2012-07-30 15:33:02.192760856 -0400
@@ -1,7 +1,7 @@
  Index: linux-2.6.38/drivers/gpio/max7311.c
  ===================================================================
  diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
-index 3143ac7..ed49ee2 100644
+index 4e04157..6703509 100644
  --- a/drivers/gpio/Kconfig
  +++ b/drivers/gpio/Kconfig
  @@ -23,7 +23,6 @@ config ARCH_REQUIRE_GPIOLIB
@@ -12,7 +12,7 @@
   menuconfig GPIOLIB
         bool "GPIO Support"
         depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
-@@ -137,6 +136,13 @@ config GPIO_MAX7300
+@@ -200,6 +199,13 @@ config GPIO_MAX7300
         help
           GPIO driver for Maxim MAX7301 I2C-based GPIO expander.

@@ -27,17 +27,18 @@
         tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
         depends on I2C
  diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
-index bdf3dde..5e22ef0 100644
+index 4e018d6..d9abdc2 100644
  --- a/drivers/gpio/Makefile
  +++ b/drivers/gpio/Makefile
-@@ -41,3 +41,4 @@ obj-$(CONFIG_GPIO_RDC321X)   += rdc321x-gpio.o
- obj-$(CONFIG_GPIO_JANZ_TTL)   += janz-ttl.o
- obj-$(CONFIG_GPIO_SX150X)     += sx150x.o
- obj-$(CONFIG_GPIO_VX855)      += vx855_gpio.o
+@@ -62,3 +62,5 @@ obj-$(CONFIG_GPIO_WM831X)    += gpio-wm831x.o
+ obj-$(CONFIG_GPIO_WM8350)     += gpio-wm8350.o
+ obj-$(CONFIG_GPIO_WM8994)     += gpio-wm8994.o
+ obj-$(CONFIG_GPIO_XILINX)     += gpio-xilinx.o
  +obj-$(CONFIG_GPIO_MAX7311)      += max7311.o
++
  diff --git a/drivers/gpio/max7311.c b/drivers/gpio/max7311.c
  new file mode 100644
-index 0000000..c196fac
+index 0000000..7135a24
  --- /dev/null
  +++ b/drivers/gpio/max7311.c
  @@ -0,0 +1,594 @@


------------------------





>
> BTW our board is a powerpc 8313e based board (modeled after mpc8313e-rds)
>
> One other thing I noticed; do_install seems to take quite some time; not
> sure why this is (haven't investigated).
>
> Best regards, Frans
>
>
>     Cheers,
>
>     Bruce
>
>      >
>      > Below is a log that illustrates this and demonstrates that things
>     are ok the
>      > 2nd time.
>      > (btw I am also a little bit concerned on the command not found
>     messages).
>      > And of course any sugguestion for a fix is greatly appreciated.
>      >
>      > Best regards, Frans
>      >
>      > frans@frans-desktop:~/poky-denzil-7.0-build$ bitbake virtual/kernel
>      > Parsing recipes: 100%
>      >
>     |######################################################################################################################|
>      > Time: 00:00:30
>      > Parsing of 829 .bb files complete (0 cached, 829 parsed). 1105
>     targets, 35
>      > skipped, 0 masked, 0 errors.
>      >
>      > OE Build Configuration:
>      > BB_VERSION = "1.15.1"
>      > TARGET_ARCH = "powerpc"
>      > TARGET_OS = "linux-uclibc"
>      > MACHINE = "syrcxx"
>      > DISTRO = "poky"
>      > DISTRO_VERSION = "1.2"
>      > TUNE_FEATURES = "m32 fpu-hard ppce300c3"
>      > TARGET_FPU = ""
>      > meta
>      > meta-yocto
>      > meta-syrcxx = "<unknown>:<unknown>"
>      >
>      > NOTE: Resolving any missing task queue dependencies
>      > NOTE: Preparing runqueue
>      > NOTE: Executing SetScene Tasks
>      > NOTE: Executing RunQueue Tasks
>      > NOTE: Running task 162 of 664 (ID: 6,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_fetch)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_fetch: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_fetch: Succeeded
>      > NOTE: Running task 644 of 664 (ID: 2,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_unpack)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_unpack: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_unpack: Succeeded
>      > Nmeta-syrcxx/recipes-kernel/linux/linux-yocto_3.2.bbappend
>     meta-syrcxx/recipes-kernel/linux/linux-yocto_3.0.bbappendOTE:
>     Running task 645 of 664 (ID: 1,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_kernel_checkout)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_kernel_checkout: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_kernel_checkout: Succeeded
>      > NOTE: Running task 646 of 664 (ID: 0,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_validate_branches)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_validate_branches: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_validate_branches: Succeeded
>      > NOTE: Running task 647 of 664 (ID: 3,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_patch)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_patch: Started
>      > ERROR: Function failed: do_patch (see
>      >
>     /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
>      > for further information)
>      > ERROR: Logfile of failure stored in:
>      >
>     /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
>      > Log data follows:
>      > | Branch meta-temp set up to track remote branch meta from origin.
>      > | Deleted branch meta-temp (was 3499d64).
>      > | warning: could not find (or was already included):
>      > cfg/dmaengine/dmaengine.scc
>      > | warning: could not find (or was already included):
>      > cfg/usb-mass-storage.scc
>      > | warning: could not find (or was already included): cfg/vfat.scc
>      > | warning: could not find (or was already included):
>      > cfg/dmaengine/dmaengine.scc
>      > | warning: could not find (or was already included): user-patches.scc
>      > | ./2-syrcxx-215ef69425ed902858630c959dabd5ce.sco: line 21:
>      > dmaengine_68b329da9893e34099c7d8ad5cb9c940: command not found
>      > | ./2-syrcxx-215ef69425ed902858630c959dabd5ce.sco: line 21:
>      > dmaengine_68b329da9893e34099c7d8ad5cb9c940: command not found
>      > | [INFO] validating against known patches
>     (syrcxx-fsl-mpc8313e-rdb-meta)
>      > Branch standard/default/syrcxx set up to track remote branch
>      > standard/default/base from origin.
>      > [##################################ERROR: Function failed:
>     do_patch (see
>      >
>     /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/temp/log.do_patch.27211
>      > for further information)
>      > error: patch failed: drivers/gpio/Makefile:41 ] (-)(76 %)
>      > | error: drivers/gpio/Makefile: patch does not apply
>      > | To force apply this patch, use 'guilt push -f'
>      > | [ERROR] unable to complete push
>      > | pending patches are:
>      > | Patches directory doesn't exist, try guilt-init
>      > | ERROR. could not update git tree
>      > | ERROR. Could not modify standard/default/fsl-mpc8313e-rdb/syrcxx
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_patch: Failed
>      > ERROR: Task 3
>      >
>     (/home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_patch) failed with exit code '1'
>      > NOTE: Tasks Summary: Attempted 647 tasks of which 642 didn't need
>     to be
>      > rerun and 1 failed.
>      >
>      > Summary: 1 task failed:
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_patch
>      > Summary: There was 1 ERROR message shown, returning a non-zero
>     exit code.
>      > frans@frans-desktop:~/poky-denzil-7.0-build$ ls -l
>      >
>     /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/linux/drivers/gpio/Makefile
>      > -rw-r--r-- 1 frans frans 2663 2012-07-30 12:27
>      >
>     /home/frans/poky-denzil-7.0-build/tmp/work/syrcxx-poky-linux-uclibc/linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81/linux/drivers/gpio/Makefile
>      > frans@frans-desktop:~/poky-denzil-7.0-build$ bitbake virtual/kernel
>      > Loading cache: 100%
>      >
>     |########################################################################################################################|
>      > ETA: 00:00:00
>      > Loaded 1106 entries from dependency cache.
>      >
>      > OE Build Configuration:
>      > BB_VERSION = "1.15.1"
>      > TARGET_ARCH = "powerpc"
>      > TARGET_OS = "linux-uclibc"
>      > MACHINE = "syrcxx"
>      > DISTRO = "poky"
>      > DISTRO_VERSION = "1.2"
>      > TUNE_FEATURES = "m32 fpu-hard ppce300c3"
>      > TARGET_FPU = ""
>      > meta
>      > meta-yocto
>      > meta-syrcxx = "<unknown>:<unknown>"
>      >
>      > NOTE: Resolving any missing task queue dependencies
>      > NOTE: Preparing runqueue
>      > NOTE: Executing SetScene Tasks
>      > NOTE: Executing RunQueue Tasks
>      > NOTE: Running task 241 of 664 (ID: 3,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_patch)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_patch: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_patch: Succeeded
>      > NOTE: Running task 648 of 664 (ID: 8,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_kernel_configme)
>      > NOTE: Running task 649 of 664 (ID: 20,
>      >
>     /home/frans/poky-denzil-7.0/meta/recipes-kernel/linux/linux-yocto_3.2.bb
>     <http://linux-yocto_3.2.bb>,
>      > do_populate_lic)
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_populate_lic: Started
>      > NOTE: package
>      >
>     linux-yocto-3.2.11+git1+b14a08f5c7b469a5077c10942f4e1aec171faa9d_1+01e948c2bdf7f5ad9f2b30047a8d3493a1a2880a-r1.81:
>      > task do_kernel_configme: Started
>      >
>      >
>      > _______________________________________________
>      > yocto mailing list
>      > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org>
>      > https://lists.yoctoproject.org/listinfo/yocto
>      >
>
>
>
>     --
>     "Thou shalt not follow the NULL pointer, for chaos and madness await
>     thee at its end"
>
>
>
>
> _______________________________________________
> yocto mailing list
> yocto@yoctoproject.org
> https://lists.yoctoproject.org/listinfo/yocto



^ permalink raw reply	[flat|nested] 7+ messages in thread

* Re: denzil kernel build issues
  2012-07-30 20:33     ` Bruce Ashfield
@ 2012-07-30 21:32       ` Frans Meulenbroeks
  0 siblings, 0 replies; 7+ messages in thread
From: Frans Meulenbroeks @ 2012-07-30 21:32 UTC (permalink / raw)
  To: Bruce Ashfield; +Cc: yocto

[-- Attachment #1: Type: text/plain, Size: 21128 bytes --]

2012/7/30 Bruce Ashfield <bruce.ashfield@windriver.com>

> On 12-07-30 10:20 AM, Frans Meulenbroeks wrote:
>
>> Hi Bruce,
>>
>> Thanks for your support.
>> See below
>>
>> 2012/7/30 Bruce Ashfield <bruce.ashfield@gmail.com
>> <mailto:bruce.ashfield@gmail.**com <bruce.ashfield@gmail.com>>>
>>
>>
>>     On Mon, Jul 30, 2012 at 7:33 AM, Frans Meulenbroeks
>>     <fransmeulenbroeks@gmail.com <mailto:fransmeulenbroeks@**gmail.com<fransmeulenbroeks@gmail.com>
>> >>
>>
>>     wrote:
>>      > Dear all,
>>      >
>>      > I finally managed to find time to pick up porting my project to
>>     denzil and
>>      > did encounter two issues that I wanted to report back:
>>      >
>>      > First is that I could not find what the preferred way was to
>>     disable a
>>      > kernel option in my bsp.
>>      > (the option concerned is CONFIG_PM).
>>      > Of course I can sed it out in do_configure but I'd hoped it could
>>     be simpler
>>      > (I have tried:
>>      > CONFIG_PM=n
>>      > in my config snippet)
>>
>>     Putting:
>>
>>     # CONFIG_PM is not set
>>
>>     in your configuration fragment will turn off an option, the BSP
>>     guide has a
>>     "# CONFIG_SMP is not set" as an example for this.
>>
>>
>> i thought it would and I have had this in my config too, but still it
>> get switched on. Guess there is something else in my config that sets
>> this.
>> Will dive into this.
>>
>>
>>      >
>>      > Secondly a patch of mine does not seem to apply properly the
>>     first time, but
>>      > it does apply a second time.
>>      > This suggests a race between do_kernel_checkout and do_patch
>>
>>     There shouldn't be any race .. if this doesn't work:
>>
>>     addtask kernel_checkout before do_patch after do_unpack
>>
>>     Then there are some serious problems with bitbake's task scheduling.
>>
>>     If you didn't do a clean between the two runs, the second is
>>     attempting to continue
>>     the patching and you still aren't getting what you want.
>>
>>
>> I did not do a clean inbetween. I figured patch would reattempt to patch
>> and, since the file is there it would continue.
>>
>> The addtask line is there in one of the bitbake files.
>>
>> The odd thing is that the exact same thing builds fine under 3.0.
>> Actually I was trying to move from 3.0 to 3.2 while stumbling on this.
>>
>>
>>
>>     Without seeing what you've ported, or a work in progress I can't say
>>     exactly
>>     what is wrong, but your meta data is somehow wrong or completely
>>     missing.
>>     Have you set any meta or BSP SRCREVs explicitly ?
>>
>>
>> I have put my work-in-progress in:
>>
>> https://www.dropbox.com/s/**h58h6pq5b0f4u2s/patchproblem.**tar.gz<https://www.dropbox.com/s/h58h6pq5b0f4u2s/patchproblem.tar.gz>vi
>>
>> you might want to edit conf/layer.conf as it has hardcoded paths.
>> If I go to meta-syrcxx/conf/machine/**syrcxx.conf and set the preferred
>> kernel version to 3.0 things build fine.
>> Then I did set to 3.2 and it fails.
>> Note that apart from a PR bump the files
>> meta-syrcxx/recipes-kernel/**linux/linux-yocto_3.2.bbappend
>> meta-syrcxx/recipes-kernel/**linux/linux-yocto_3.0.bbappend
>> are identical (and I am just using files; so the same patches apply.
>>
>
> You've got a couple of minor problems in the files. dmaengine is
> incorrectly referenced for 3.2. I've attached a fix for that. The
> other items are just warnings..
>
> I have fixes to make that bad configuration reference a hard error,
> with a message during do_patch that high lights the problem .. for
> master. But in denzil, what you got is what I'd expect.
>
> Your max7311.patch also needs to be refreshed for 3.2, since it won't
> apply as is.
>
> After the failure, I refreshed it as follows:
>
>
>  > bitbake -c devshell linux-yocto
>
> # in dev-shell:
>
>  # already fixed in master, but denzil requires this:
>  > export GUILT_BASE=meta
>  > guilt next
> links/files/max7311.patch
>  > guilt push -f
>  # resolve conflict in drivers/gpio/Makefile
>  > git add drivers/gpio/Makefile drivers/gpio/max7311.c
> include/linux/max7311_gpio.h
>  > git clean -f
> Removing drivers/gpio/Makefile.rej
>  > git tag standard/default/syrcxx_top
>  > guilt refresh
> Patch links/files/max7311.patch refreshed
>
>  > cp meta/patches/standard/default/**syrcxx/links/files/max7311.**patch
> $your_layer_location/meta-**syrcxx/recipes-kernel/linux/**files
>
>  > guilt push -a
> Applying patch..links/files/axonbus-**remote.patch
> Patch applied.
> Applying patch..links/files/axonbus-**local.patch
> Patch applied.
> Applying patch..links/files/axon-**display.patch
> Patch applied.
> Applying patch..links/files/axon-**keyboard.patch
> Patch applied.
> Applying patch..links/files/axon-hwmon.**patch
> Patch applied.
>
>  # the series is now clean.
>
> I then cleaned linux-yocto and restarted, it configures and builds
> after that (and eventually gets a build error, but that looks like an
> issue with the code on the 3.2 kernel .. and is for someone else to
> fix :)
>
> As for the CONFIG_PM, it's a Kconfig "feature" that is causing you
> pain. You can't directly "access" (enable/disable) and option that
> doesn't have help text, since the help text makes it "user visible"
> and hence a configuration knob. (Don't blame me, I don't condone this,
> but it is what it is). In this case you need to blast one of the
> dependencies
> to disable it. I turned off CONFIG_SUSPEND to get CONFIG_PM out of
> my final.config.
>
> I inlined my three changes here, the last one is the patch refresh
> for drivers/Kconfig, so it's not all that useful :)
>
> Cheers,
>
> Bruce
>
> Cool!

Thanks alot
as for CONFIG_PM: I guessed soemthing like that was the case.
Will peek into the rest of your email and test things tomorrow morning
(11.30 pm here)

Best regards, Frans

>
> -------------------------
>
>
> > diff -u syrcxx.cfg.orig syrcxx.cfg
> --- syrcxx.cfg.orig     2012-07-30 16:02:20.374008667 -0400
> +++ syrcxx.cfg  2012-07-30 16:23:04.364007467 -0400
> @@ -304,7 +304,7 @@
>  CONFIG_FORCE_MAX_ZONEORDER=11
>  # CONFIG_CMDLINE_BOOL is not set
>  CONFIG_EXTRA_TARGETS=""
> -CONFIG_PM=n
> +# CONFIG_SUSPEND is not set
>  # CONFIG_SECCOMP is not set
>  CONFIG_ISA_DMA_API=y
>  #
> yow-bashfiel-d2 [/home/bruc...inux/files]> diff -u syrcxx.scc.orig
> syrcxx.scc
> --- syrcxx.scc.orig     2012-07-30 15:16:22.374007496 -0400
> +++ syrcxx.scc  2012-07-30 15:17:01.284008083 -0400
> @@ -2,7 +2,7 @@
>
>  include cfg/usb-mass-storage.scc
>  include cfg/vfat.scc
> -include cfg/dmaengine/dmaengine.scc
> +include cfg/dmaengine.scc
>
>  kconf hardware user-config.cfg
>  include user-patches.scc
> yow-bashfiel-d2 [/home/bruc...inux/files]> diff -u max7311.patch.orig
> max7311.patch
> --- max7311.patch.orig  2012-07-30 15:18:55.963930827 -0400
> +++ max7311.patch       2012-07-30 15:33:02.192760856 -0400
> @@ -1,7 +1,7 @@
>  Index: linux-2.6.38/drivers/gpio/**max7311.c
>  ==============================**==============================**=======
>  diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> -index 3143ac7..ed49ee2 100644
> +index 4e04157..6703509 100644
>  --- a/drivers/gpio/Kconfig
>  +++ b/drivers/gpio/Kconfig
>  @@ -23,7 +23,6 @@ config ARCH_REQUIRE_GPIOLIB
> @@ -12,7 +12,7 @@
>   menuconfig GPIOLIB
>         bool "GPIO Support"
>         depends on ARCH_WANT_OPTIONAL_GPIOLIB || ARCH_REQUIRE_GPIOLIB
> -@@ -137,6 +136,13 @@ config GPIO_MAX7300
> +@@ -200,6 +199,13 @@ config GPIO_MAX7300
>         help
>           GPIO driver for Maxim MAX7301 I2C-based GPIO expander.
>
> @@ -27,17 +27,18 @@
>         tristate "MAX7319, MAX7320-7327 I2C Port Expanders"
>         depends on I2C
>  diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
> -index bdf3dde..5e22ef0 100644
> +index 4e018d6..d9abdc2 100644
>  --- a/drivers/gpio/Makefile
>  +++ b/drivers/gpio/Makefile
> -@@ -41,3 +41,4 @@ obj-$(CONFIG_GPIO_RDC321X)   += rdc321x-gpio.o
> - obj-$(CONFIG_GPIO_JANZ_TTL)   += janz-ttl.o
> - obj-$(CONFIG_GPIO_SX150X)     += sx150x.o
> - obj-$(CONFIG_GPIO_VX855)      += vx855_gpio.o
> +@@ -62,3 +62,5 @@ obj-$(CONFIG_GPIO_WM831X)    += gpio-wm831x.o
> + obj-$(CONFIG_GPIO_WM8350)     += gpio-wm8350.o
> + obj-$(CONFIG_GPIO_WM8994)     += gpio-wm8994.o
> + obj-$(CONFIG_GPIO_XILINX)     += gpio-xilinx.o
>  +obj-$(CONFIG_GPIO_MAX7311)      += max7311.o
> ++
>  diff --git a/drivers/gpio/max7311.c b/drivers/gpio/max7311.c
>  new file mode 100644
> -index 0000000..c196fac
> +index 0000000..7135a24
>  --- /dev/null
>  +++ b/drivers/gpio/max7311.c
>  @@ -0,0 +1,594 @@
>
>
> ------------------------
>
>
>
>
>
>
>> BTW our board is a powerpc 8313e based board (modeled after mpc8313e-rds)
>>
>> One other thing I noticed; do_install seems to take quite some time; not
>> sure why this is (haven't investigated).
>>
>> Best regards, Frans
>>
>>
>>     Cheers,
>>
>>     Bruce
>>
>>      >
>>      > Below is a log that illustrates this and demonstrates that things
>>     are ok the
>>      > 2nd time.
>>      > (btw I am also a little bit concerned on the command not found
>>     messages).
>>      > And of course any sugguestion for a fix is greatly appreciated.
>>      >
>>      > Best regards, Frans
>>      >
>>      > frans@frans-desktop:~/poky-**denzil-7.0-build$ bitbake
>> virtual/kernel
>>      > Parsing recipes: 100%
>>      >
>>     |#############################**##############################**
>> ##############################**#############################|
>>      > Time: 00:00:30
>>      > Parsing of 829 .bb files complete (0 cached, 829 parsed). 1105
>>     targets, 35
>>      > skipped, 0 masked, 0 errors.
>>      >
>>      > OE Build Configuration:
>>      > BB_VERSION = "1.15.1"
>>      > TARGET_ARCH = "powerpc"
>>      > TARGET_OS = "linux-uclibc"
>>      > MACHINE = "syrcxx"
>>      > DISTRO = "poky"
>>      > DISTRO_VERSION = "1.2"
>>      > TUNE_FEATURES = "m32 fpu-hard ppce300c3"
>>      > TARGET_FPU = ""
>>      > meta
>>      > meta-yocto
>>      > meta-syrcxx = "<unknown>:<unknown>"
>>      >
>>      > NOTE: Resolving any missing task queue dependencies
>>      > NOTE: Preparing runqueue
>>      > NOTE: Executing SetScene Tasks
>>      > NOTE: Executing RunQueue Tasks
>>      > NOTE: Running task 162 of 664 (ID: 6,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_fetch)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_fetch: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_fetch: Succeeded
>>      > NOTE: Running task 644 of 664 (ID: 2,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_unpack)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_unpack: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_unpack: Succeeded
>>      > Nmeta-syrcxx/recipes-kernel/**linux/linux-yocto_3.2.bbappend
>>     meta-syrcxx/recipes-kernel/**linux/linux-yocto_3.0.**bbappendOTE:
>>     Running task 645 of 664 (ID: 1,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_kernel_checkout)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_kernel_checkout: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_kernel_checkout: Succeeded
>>      > NOTE: Running task 646 of 664 (ID: 0,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_validate_branches)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_validate_branches: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_validate_branches: Succeeded
>>      > NOTE: Running task 647 of 664 (ID: 3,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_patch)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_patch: Started
>>      > ERROR: Function failed: do_patch (see
>>      >
>>     /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-**
>> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**
>> 93a1a2880a-r1.81/temp/log.do_**patch.27211
>>      > for further information)
>>      > ERROR: Logfile of failure stored in:
>>      >
>>     /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-**
>> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**
>> 93a1a2880a-r1.81/temp/log.do_**patch.27211
>>      > Log data follows:
>>      > | Branch meta-temp set up to track remote branch meta from origin.
>>      > | Deleted branch meta-temp (was 3499d64).
>>      > | warning: could not find (or was already included):
>>      > cfg/dmaengine/dmaengine.scc
>>      > | warning: could not find (or was already included):
>>      > cfg/usb-mass-storage.scc
>>      > | warning: could not find (or was already included): cfg/vfat.scc
>>      > | warning: could not find (or was already included):
>>      > cfg/dmaengine/dmaengine.scc
>>      > | warning: could not find (or was already included):
>> user-patches.scc
>>      > | ./2-syrcxx-**215ef69425ed902858630c959dabd5**ce.sco: line 21:
>>      > dmaengine_**68b329da9893e34099c7d8ad5cb9c9**40: command not found
>>      > | ./2-syrcxx-**215ef69425ed902858630c959dabd5**ce.sco: line 21:
>>      > dmaengine_**68b329da9893e34099c7d8ad5cb9c9**40: command not found
>>      > | [INFO] validating against known patches
>>     (syrcxx-fsl-mpc8313e-rdb-meta)
>>      > Branch standard/default/syrcxx set up to track remote branch
>>      > standard/default/base from origin.
>>      > [#############################**#####ERROR: Function failed:
>>     do_patch (see
>>      >
>>     /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-**
>> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**
>> 93a1a2880a-r1.81/temp/log.do_**patch.27211
>>      > for further information)
>>      > error: patch failed: drivers/gpio/Makefile:41 ] (-)(76 %)
>>      > | error: drivers/gpio/Makefile: patch does not apply
>>      > | To force apply this patch, use 'guilt push -f'
>>      > | [ERROR] unable to complete push
>>      > | pending patches are:
>>      > | Patches directory doesn't exist, try guilt-init
>>      > | ERROR. could not update git tree
>>      > | ERROR. Could not modify standard/default/fsl-mpc8313e-**
>> rdb/syrcxx
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_patch: Failed
>>      > ERROR: Task 3
>>      >
>>     (/home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_patch) failed with exit code '1'
>>      > NOTE: Tasks Summary: Attempted 647 tasks of which 642 didn't need
>>     to be
>>      > rerun and 1 failed.
>>      >
>>      > Summary: 1 task failed:
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_patch
>>      > Summary: There was 1 ERROR message shown, returning a non-zero
>>     exit code.
>>      > frans@frans-desktop:~/poky-**denzil-7.0-build$ ls -l
>>      >
>>     /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-**
>> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81/linux/**
>> drivers/gpio/Makefile
>>      > -rw-r--r-- 1 frans frans 2663 2012-07-30 12:27
>>      >
>>     /home/frans/poky-denzil-7.0-**build/tmp/work/syrcxx-poky-**
>> linux-uclibc/linux-yocto-3.2.**11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81/linux/**
>> drivers/gpio/Makefile
>>      > frans@frans-desktop:~/poky-**denzil-7.0-build$ bitbake
>> virtual/kernel
>>      > Loading cache: 100%
>>      >
>>     |#############################**##############################**
>> ##############################**##############################**#|
>>      > ETA: 00:00:00
>>      > Loaded 1106 entries from dependency cache.
>>      >
>>      > OE Build Configuration:
>>      > BB_VERSION = "1.15.1"
>>      > TARGET_ARCH = "powerpc"
>>      > TARGET_OS = "linux-uclibc"
>>      > MACHINE = "syrcxx"
>>      > DISTRO = "poky"
>>      > DISTRO_VERSION = "1.2"
>>      > TUNE_FEATURES = "m32 fpu-hard ppce300c3"
>>      > TARGET_FPU = ""
>>      > meta
>>      > meta-yocto
>>      > meta-syrcxx = "<unknown>:<unknown>"
>>      >
>>      > NOTE: Resolving any missing task queue dependencies
>>      > NOTE: Preparing runqueue
>>      > NOTE: Executing SetScene Tasks
>>      > NOTE: Executing RunQueue Tasks
>>      > NOTE: Running task 241 of 664 (ID: 3,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_patch)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_patch: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_patch: Succeeded
>>      > NOTE: Running task 648 of 664 (ID: 8,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_kernel_configme)
>>      > NOTE: Running task 649 of 664 (ID: 20,
>>      >
>>     /home/frans/poky-denzil-7.0/**meta/recipes-kernel/linux/linu**
>> x-yocto_3.2.bb <http://linux-yocto_3.2.bb>
>>     <http://linux-yocto_3.2.bb>,
>>
>>      > do_populate_lic)
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_populate_lic: Started
>>      > NOTE: package
>>      >
>>     linux-yocto-3.2.11+git1+**b14a08f5c7b469a5077c10942f4e1a**
>> ec171faa9d_1+**01e948c2bdf7f5ad9f2b30047a8d34**93a1a2880a-r1.81:
>>      > task do_kernel_configme: Started
>>      >
>>      >
>>      > ______________________________**_________________
>>      > yocto mailing list
>>      > yocto@yoctoproject.org <mailto:yocto@yoctoproject.org**>
>>
>>      > https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>
>>      >
>>
>>
>>
>>     --
>>     "Thou shalt not follow the NULL pointer, for chaos and madness await
>>     thee at its end"
>>
>>
>>
>>
>> ______________________________**_________________
>> yocto mailing list
>> yocto@yoctoproject.org
>> https://lists.yoctoproject.**org/listinfo/yocto<https://lists.yoctoproject.org/listinfo/yocto>
>>
>
>

[-- Attachment #2: Type: text/html, Size: 25782 bytes --]

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2012-07-30 21:32 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-30 11:33 denzil kernel build issues Frans Meulenbroeks
2012-07-30 12:54 ` Bruce Ashfield
2012-07-30 14:20   ` Frans Meulenbroeks
2012-07-30 17:42     ` Bruce Ashfield
2012-07-30 20:11       ` Frans Meulenbroeks
2012-07-30 20:33     ` Bruce Ashfield
2012-07-30 21:32       ` Frans Meulenbroeks

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.