* Alsa: USB Class 2 Audio soundcard device disappears suddenly @ 2012-07-30 22:32 Joao Bonina 2012-07-31 5:24 ` Daniel Mack 0 siblings, 1 reply; 10+ messages in thread From: Joao Bonina @ 2012-07-30 22:32 UTC (permalink / raw) To: alsa-devel@alsa-project.org Hi, I'm using an USB Class 2 Audio DAC (basically a soundcard) with my Linux box and MPD software. It works great when playing files stored in a remote share, but when playing files from an USB pen, it stops playing in a few minutes. Mpd.log shows this: Code: Jul 30 13:03 : output: "USB" [alsa] failed to play: No such device Jul 30 13:03 : output: closed plugin=alsa name="USB" ALSA lib pcm_hw.c:1401:(_snd_pcm_hw_open) Invalid value for card Jul 30 13:03 : output: Failed to open "USB" [alsa]: Failed to open ALSA device "hw:0,0": No such file or directoryIt seems to be somewhat related to the USB bus not being able to cope with both PCM streaming to the soundcard and reading from the flash pen simultaneously, I guess. So, anybody faced this issue previously and can provide some hints to solve this? MPD is 0.17, kernel is 3.2.17, alsa-utils is 1.0.25. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Alsa: USB Class 2 Audio soundcard device disappears suddenly 2012-07-30 22:32 Alsa: USB Class 2 Audio soundcard device disappears suddenly Joao Bonina @ 2012-07-31 5:24 ` Daniel Mack [not found] ` <1343729241.63273.YahooMailNeo@web121603.mail.ne1.yahoo.com> 0 siblings, 1 reply; 10+ messages in thread From: Daniel Mack @ 2012-07-31 5:24 UTC (permalink / raw) To: Joao Bonina; +Cc: alsa-devel@alsa-project.org On 31.07.2012 00:32, Joao Bonina wrote: > Hi, > > I'm using an USB Class 2 Audio DAC (basically a soundcard) with my Linux box and MPD software. > > It works great when playing files stored in a remote share, but when > playing files from an USB pen, it stops playing in a few minutes. > > Mpd.log shows this: > > Code: > Jul 30 13:03 : output: "USB" [alsa] failed to play: No such device > Jul 30 13:03 : output: closed plugin=alsa name="USB" > ALSA lib pcm_hw.c:1401:(_snd_pcm_hw_open) Invalid value for card > Jul 30 13:03 : output: Failed to open "USB" [alsa]: Failed to open ALSA device "hw:0,0": No such file or directoryIt seems to be somewhat related to the USB bus not being able to > cope with both PCM streaming to the soundcard and reading from the flash pen simultaneously, I guess. > > So, anybody faced this issue previously and can provide some hints to solve this? > > MPD is 0.17, kernel is 3.2.17, alsa-utils is 1.0.25. Does the kernel log or 'dmesg' show anything weird what that happens? Daniel ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <1343729241.63273.YahooMailNeo@web121603.mail.ne1.yahoo.com>]
* Alsa: USB Class 2 Audio soundcard device disappears suddenly [not found] ` <1343729241.63273.YahooMailNeo@web121603.mail.ne1.yahoo.com> @ 2012-07-31 10:12 ` Joao Bonina 2012-07-31 11:38 ` Daniel Mack 0 siblings, 1 reply; 10+ messages in thread From: Joao Bonina @ 2012-07-31 10:12 UTC (permalink / raw) To: alsa-devel@alsa-project.org [-- Attachment #1: Type: text/plain, Size: 2344 bytes --] It doesn't show anything when that happens. Looking at dmesg (I'm attaching it), it shows this: [ 350.170478] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 350.170500] usb 1-4: config 1 has no interface number 2 [ 350.170843] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 350.170864] usb 1-4: config 1 has no interface number 2 [ 350.171344] usb 1-4: New USB device found, idVendor=21b4, idProduct=0230 [ 350.171366] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 350.171385] usb 1-4: Product: Ayre USB Interface [ 350.171401] usb 1-4: Manufacturer: Ayre Acoustics [ 350.171418] usb 1-4: SerialNumber: (C) 2010 XMOS/Wavelength Audio Don't know if those 'invalid interface number' messages are relevant for the issue. Joao ----- Original Message ----- From: Daniel Mack <zonque@gmail.com> To: Joao Bonina <bonina_2001@yahoo.com> Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org> Sent: Tuesday, 31 July 2012, 6:24 Subject: Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly On 31.07.2012 00:32, Joao Bonina wrote: > Hi, > > I'm using an USB Class 2 Audio DAC (basically a soundcard) with my Linux box and MPD software. > > It works great when playing files stored in a remote share, but when > playing files from an USB pen, it stops playing in a few minutes. > > Mpd.log shows this: > > Code: > Jul 30 13:03 : output: "USB" [alsa] failed to play: No such device > Jul 30 13:03 : output: closed plugin=alsa name="USB" > ALSA lib pcm_hw.c:1401:(_snd_pcm_hw_open) Invalid value for card > Jul 30 13:03 : output: Failed to open "USB" [alsa]: Failed to open ALSA device "hw:0,0": No such file or directoryIt seems to be somewhat related to the USB bus not being able to > cope with both PCM streaming to the soundcard and reading from the flash pen simultaneously, I guess. > > So, anybody faced this issue previously and can provide some hints to solve this? > > MPD is 0.17, kernel is 3.2.17, alsa-utils is 1.0.25. Does the kernel log or 'dmesg' show anything weird what that happens? Daniel _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel [-- Attachment #2: dmesg.txt --] [-- Type: text/plain, Size: 20610 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.17-rt28 (root@debian) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 PREEMPT RT Sat Jul 28 23:51:42 WEST 2012 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7c0000 (usable) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI not present or invalid. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xf7c0 max_arch_pfn = 0x100000 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009d000] 9d000 size 4096 [ 0.000000] init_memory_mapping: 0000000000000000-000000000f7c0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 000f400000 page 2M [ 0.000000] 000f400000 - 000f7c0000 page 4k [ 0.000000] kernel direct mapping tables up to f7c0000 @ 17fb000-1800000 [ 0.000000] RAMDISK: 0b7cd000 - 0ba10000 [ 0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 247MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0f7c0000 [ 0.000000] low ram: 0 - 0f7c0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000f7c0 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0000f7c0 [ 0.000000] On node 0 totalpages: 63310 [ 0.000000] free_area_init_node: node 0, pgdat c13303e0, node_mem_map cf5cf200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 464 pages used for memmap [ 0.000000] Normal zone: 58864 pages, LIFO batch:15 [ 0.000000] Allocating PCI resources starting at f7c0000 (gap: f7c0000:f0830000) [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62814 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.17-rt28 root=UUID=db00af1b-7a21-4968-9087-92bb7cb92ee0 ro quiet clocksource=acpi_pm maxcpus=1 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 244832k/253696k available (2169k kernel code, 8408k reserved, 1112k data, 260k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xcffc0000 - 0xff7fe000 ( 760 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcf7c0000 ( 247 MB) [ 0.000000] .init : 0xc1335000 - 0xc1376000 ( 260 kB) [ 0.000000] .data : 0xc121e645 - 0xc1334980 (1112 kB) [ 0.000000] .text : 0xc1000000 - 0xc121e645 (2169 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] CPU 0 irqstacks, hard=cf008000 soft=cf00a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 498.120 MHz processor. [ 0.002005] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.24 BogoMIPS (lpj=498120) [ 0.002033] pid_max: default: 32768 minimum: 301 [ 0.002333] Mount-cache hash table entries: 512 [ 0.003245] Initializing cgroup subsys cpuacct [ 0.003264] Initializing cgroup subsys devices [ 0.003278] Initializing cgroup subsys freezer [ 0.003292] Initializing cgroup subsys net_cls [ 0.003408] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02 [ 0.003630] Performance Events: no PMU driver, software events only. [ 0.004660] devtmpfs: initialized [ 0.005498] print_constraints: dummy: [ 0.005739] NET: Registered protocol family 16 [ 0.007809] PCI: PCI BIOS revision 2.10 entry at 0xfa980, last bus=0 [ 0.011107] bio: create slab <bio-0> at 0 [ 0.011435] ACPI: Interpreter disabled. [ 0.011763] PCI: Probing PCI hardware [ 0.011777] PCI: Probing PCI hardware (bus 00) [ 0.012136] pci 0000:00:01.0: [1022:2080] type 0 class 0x000600 [ 0.012302] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f] [ 0.013302] pci 0000:00:01.1: [1022:2081] type 0 class 0x000300 [ 0.013698] pci 0000:00:01.1: reg 10: [mem 0xee000000-0xeeffffff] [ 0.014029] pci 0000:00:01.1: reg 14: [mem 0xeffec000-0xeffeffff] [ 0.014327] pci 0000:00:01.1: reg 18: [mem 0xeffe8000-0xeffebfff] [ 0.014625] pci 0000:00:01.1: reg 1c: [mem 0xefff8000-0xefffbfff] [ 0.014923] pci 0000:00:01.1: reg 20: [mem 0xefff4000-0xefff7fff] [ 0.015824] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010 [ 0.016241] pci 0000:00:01.2: reg 10: [mem 0xefff0000-0xefff3fff] [ 0.018178] pci 0000:00:0d.0: [1106:3053] type 0 class 0x000200 [ 0.018275] pci 0000:00:0d.0: reg 10: [io 0xfc00-0xfcff] [ 0.018337] pci 0000:00:0d.0: reg 14: [mem 0xeffff000-0xeffff0ff] [ 0.018649] pci 0000:00:0d.0: supports D1 D2 [ 0.018666] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.018698] pci 0000:00:0d.0: PME# disabled [ 0.018874] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601 [ 0.019226] pci 0000:00:0f.0: reg 10: [io 0x6000-0x6007] [ 0.019568] pci 0000:00:0f.0: reg 14: [io 0x6100-0x61ff] [ 0.019910] pci 0000:00:0f.0: reg 18: [io 0x6200-0x623f] [ 0.020348] pci 0000:00:0f.0: reg 1c: [io 0x0000-0x001f] [ 0.020696] pci 0000:00:0f.0: reg 20: [io 0x9d00-0x9d7f] [ 0.021025] pci 0000:00:0f.0: reg 24: [io 0x9c00-0x9c3f] [ 0.021699] pci 0000:00:0f.2: [1022:209a] type 0 class 0x000101 [ 0.023147] pci 0000:00:0f.2: reg 20: [io 0xff00-0xff0f] [ 0.024176] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03 [ 0.024640] pci 0000:00:0f.5: reg 10: [mem 0xefffe000-0xefffefff] [ 0.026638] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold [ 0.026741] pci 0000:00:0f.5: PME# disabled [ 0.028580] pci 0000:00:0f.0: NatSemi IRQ router [1022:2090] [ 0.028818] PCI: pci_cache_line_size set to 32 bytes [ 0.029267] reserve RAM buffer: 000000000009e800 - 000000000009ffff [ 0.029285] reserve RAM buffer: 000000000f7c0000 - 000000000fffffff [ 0.029781] Switching to clocksource pit [ 0.029945] pnp: PnP ACPI: disabled [ 0.040779] PCI: max bus depth: 0 pci_try_num: 1 [ 0.040824] pci 0000:00:0f.0: BAR 3: assigned [io 0x1000-0x101f] [ 0.040922] pci 0000:00:0f.0: BAR 3: set to [io 0x1000-0x101f] (PCI address [0x1000-0x101f]) [ 0.040948] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.040969] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.041151] NET: Registered protocol family 2 [ 0.041367] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.041814] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.042067] TCP bind hash table entries: 8192 (order: 5, 196608 bytes) [ 0.042795] TCP: Hash tables configured (established 8192 bind 8192) [ 0.042810] TCP reno registered [ 0.042829] UDP hash table entries: 128 (order: 1, 8192 bytes) [ 0.042902] UDP-Lite hash table entries: 128 (order: 1, 8192 bytes) [ 0.043221] NET: Registered protocol family 1 [ 0.043341] pci 0000:00:01.1: Boot video device [ 0.043825] PCI: setting IRQ 5 as level-triggered [ 0.043844] pci 0000:00:0f.5: assigned PCI INT D -> IRQ 5 [ 0.044355] PCI: CLS 32 bytes, default 32 [ 0.044636] Unpacking initramfs... [ 0.515824] Freeing initrd memory: 2316k freed [ 0.518564] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.519194] scx200: NatSemi SCx200 Driver [ 0.519876] audit: initializing netlink socket (disabled) [ 0.519921] type=2000 audit(1343728315.518:1): initialized [ 0.708277] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.708903] VFS: Disk quotas dquot_6.5.2 [ 0.708975] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.709449] msgmni has been set to 482 [ 0.710148] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.710166] io scheduler noop registered [ 0.710179] io scheduler deadline registered [ 0.710236] io scheduler cfq registered (default) [ 0.791206] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.812106] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.832959] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.834642] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.837231] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.837273] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.838001] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.838225] rtc0: alarms up to one day, 114 bytes nvram [ 0.838693] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 0.839112] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 0.839141] cpuidle: using governor ladder [ 0.839570] TCP cubic registered [ 0.839727] NET: Registered protocol family 10 [ 0.840468] Mobile IPv6 [ 0.840483] NET: Registered protocol family 17 [ 0.840508] Registering the dns_resolver key type [ 0.841224] registered taskstats version 1 [ 0.842190] rtc_cmos rtc_cmos: setting system clock to 2012-07-31 09:51:56 UTC (1343728316) [ 0.842994] Freeing unused kernel memory: 260k freed [ 0.843603] Write protecting the kernel text: 2172k [ 0.843737] Write protecting the kernel read-only data: 948k [ 0.933920] udev[44]: starting version 164 [ 1.523045] Switching to clocksource tsc [ 1.567124] SCSI subsystem initialized [ 2.094375] libata version 3.00 loaded. [ 2.104990] pata_amd 0000:00:0f.2: version 0.4.1 [ 2.112743] scsi0 : pata_amd [ 2.113658] scsi1 : pata_amd [ 2.113959] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.113980] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.267206] spurious 8259A interrupt: IRQ7. [ 2.276376] ata1.00: CFA: TS4GCF133, 20110407, max UDMA/66 [ 2.276397] ata1.00: 7831152 sectors, multi 0: LBA [ 2.276438] ata1.01: ATA-0: PQI IDE DiskOnModule, YUAN1026, max UDMA/33 [ 2.276460] ata1.01: 1015056 sectors, multi 0: LBA [ 2.283283] ata1.00: configured for UDMA/66 [ 2.286273] ata1.01: configured for UDMA/33 [ 2.297413] scsi 0:0:0:0: Direct-Access ATA TS4GCF133 2011 PQ: 0 ANSI: 5 [ 2.299255] scsi 0:0:1:0: Direct-Access ATA PQI IDE DiskOnMo YUAN PQ: 0 ANSI: 5 [ 2.301427] ata2: port disabled--ignoring [ 2.350975] sd 0:0:0:0: [sda] 7831152 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 2.351297] sd 0:0:0:0: [sda] Write Protect is off [ 2.351319] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.351430] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.354674] sd 0:0:1:0: [sdb] 1015056 512-byte logical blocks: (519 MB/495 MiB) [ 2.354919] sd 0:0:1:0: [sdb] Write Protect is off [ 2.354940] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.355347] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.356127] sda: sda1 sda2 [ 2.359915] sdb: unknown partition table [ 2.364252] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 2.364290] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.854524] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 2.855667] kjournald starting. Commit interval 5 seconds [ 3.651393] udev[161]: starting version 164 [ 4.021770] AMD Geode RNG detected [ 4.055504] cs5535-mfd 0000:00:0f.0: 5 devices registered. [ 4.063278] PCI: setting IRQ 11 as level-triggered [ 4.063301] Geode LX AES 0000:00:01.2: found PCI INT A -> IRQ 11 [ 4.064184] pci 0000:00:01.1: IRQ routing conflict: have IRQ 10, want IRQ 11 [ 4.064240] Geode LX AES 0000:00:01.2: IRQ routing conflict: have IRQ 10, want IRQ 11 [ 4.086509] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker [ 4.106113] geode-aes: GEODE AES engine enabled. [ 4.106844] PCI: setting IRQ 10 as level-triggered [ 4.106866] via-rhine 0000:00:0d.0: found PCI INT A -> IRQ 10 [ 4.107002] via-rhine 0000:00:0d.0: IRQ routing conflict: have IRQ 11, want IRQ 10 [ 4.107192] via-rhine 0000:00:0d.0: setting latency timer to 64 [ 4.184403] via-rhine 0000:00:0d.0: eth0: VIA Rhine III (Management Adapter) at 0xeffff000, 00:0d:b9:0e:0d:28, IRQ 11 [ 4.199971] via-rhine 0000:00:0d.0: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1 [ 4.464417] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x6200-0x623f] [ 4.464446] cs5535-mfgpt cs5535-mfgpt: 4 MFGPT timers available [ 4.592612] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x61ff] [ 4.592761] cs5535-gpio cs5535-gpio: GPIO support successfully loaded. [ 4.630513] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered [ 4.731332] usbcore: registered new interface driver usbfs [ 4.731454] usbcore: registered new interface driver hub [ 4.741190] usbcore: registered new device driver usb [ 4.775581] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.775826] ehci_hcd 0000:00:0f.5: found PCI INT D -> IRQ 5 [ 4.785390] ehci_hcd 0000:00:0f.5: setting latency timer to 64 [ 4.785462] ehci_hcd 0000:00:0f.5: EHCI Host Controller [ 4.785558] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1 [ 4.814153] ehci_hcd 0000:00:0f.5: irq 5, io mem 0xefffe000 [ 4.820074] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00 [ 4.820198] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.820220] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.820239] usb usb1: Product: EHCI Host Controller [ 4.820255] usb usb1: Manufacturer: Linux 3.2.17-rt28 ehci_hcd [ 4.820272] usb usb1: SerialNumber: 0000:00:0f.5 [ 4.825364] hub 1-0:1.0: USB hub found [ 4.825394] hub 1-0:1.0: 4 ports detected [ 5.127110] usb 1-2: new high-speed USB device number 2 using ehci_hcd [ 5.241789] usb 1-2: New USB device found, idVendor=1a40, idProduct=0201 [ 5.241812] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.241831] usb 1-2: Product: USB 2.0 Hub [MTT] [ 5.242719] hub 1-2:1.0: USB hub found [ 5.242905] hub 1-2:1.0: 7 ports detected [ 5.346116] usb 1-3: new high-speed USB device number 3 using ehci_hcd [ 5.465393] usb 1-3: New USB device found, idVendor=0951, idProduct=1643 [ 5.465416] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.465434] usb 1-3: Product: DataTraveler G3 [ 5.465450] usb 1-3: Manufacturer: Kingston [ 5.465466] usb 1-3: SerialNumber: 001CC0EC346CBC51171B0070 [ 5.569072] usb 1-4: new high-speed USB device number 4 using ehci_hcd [ 5.683467] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 5.683489] usb 1-4: config 1 has no interface number 2 [ 5.683837] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 5.683858] usb 1-4: config 1 has no interface number 2 [ 5.684338] usb 1-4: New USB device found, idVendor=21b4, idProduct=0230 [ 5.684360] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.684379] usb 1-4: Product: Ayre USB Interface [ 5.684395] usb 1-4: Manufacturer: Ayre Acoustics [ 5.684411] usb 1-4: SerialNumber: (C) 2010 XMOS/Wavelength Audio [ 5.796093] Initializing USB Mass Storage driver... [ 5.796584] scsi2 : usb-storage 1-3:1.0 [ 5.798866] usbcore: registered new interface driver usb-storage [ 5.798882] USB Mass Storage support registered. [ 6.022209] usbcore: registered new interface driver snd-usb-audio [ 6.878244] scsi 2:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS [ 7.070956] EXT3-fs (sda1): using internal journal [ 7.256508] fuse init (API version 7.17) [ 8.436629] sd 2:0:0:0: [sdc] 61408128 512-byte logical blocks: (31.4 GB/29.2 GiB) [ 8.437229] sd 2:0:0:0: [sdc] Write Protect is off [ 8.437251] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 8.437860] sd 2:0:0:0: [sdc] No Caching mode page present [ 8.437878] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 8.443364] sd 2:0:0:0: [sdc] No Caching mode page present [ 8.443383] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 8.464206] sdc: sdc1 [ 8.470498] sd 2:0:0:0: [sdc] No Caching mode page present [ 8.470517] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 8.470538] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 8.535321] w83627hf: w83627hf: Found W83627HF chip at 0x290 [ 8.583768] ppdev: user-space parallel port driver [ 8.611663] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] [ 8.612355] parport0: irq 7 detected [ 9.621503] EXT3-fs (sdb): warning: maximal mount count reached, running e2fsck is recommended [ 9.621645] kjournald starting. Commit interval 5 seconds [ 9.635548] EXT3-fs (sdb): using internal journal [ 9.635571] EXT3-fs (sdb): mounted filesystem with ordered data mode [ 9.643714] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 9.646086] kjournald starting. Commit interval 5 seconds [ 11.183985] via-rhine 0000:00:0d.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 11.805579] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 22.082042] eth0: no IPv6 routers present [ 123.396170] hub 1-0:1.0: port 4 disabled by hub (EMI?), re-enabling... [ 123.396194] usb 1-4: USB disconnect, device number 4 [ 123.661067] usb 1-4: new high-speed USB device number 5 using ehci_hcd [ 123.775498] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 123.775520] usb 1-4: config 1 has no interface number 2 [ 123.775865] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 123.775886] usb 1-4: config 1 has no interface number 2 [ 123.776366] usb 1-4: New USB device found, idVendor=21b4, idProduct=0230 [ 123.776387] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 123.776406] usb 1-4: Product: Ayre USB Interface [ 123.776422] usb 1-4: Manufacturer: Ayre Acoustics [ 123.776439] usb 1-4: SerialNumber: (C) 2010 XMOS/Wavelength Audio [ 293.957030] sched: RT throttling activated [ 349.789200] hub 1-0:1.0: port 4 disabled by hub (EMI?), re-enabling... [ 349.789224] usb 1-4: USB disconnect, device number 5 [ 350.056082] usb 1-4: new high-speed USB device number 6 using ehci_hcd [ 350.170478] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 350.170500] usb 1-4: config 1 has no interface number 2 [ 350.170843] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 350.170864] usb 1-4: config 1 has no interface number 2 [ 350.171344] usb 1-4: New USB device found, idVendor=21b4, idProduct=0230 [ 350.171366] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 350.171385] usb 1-4: Product: Ayre USB Interface [ 350.171401] usb 1-4: Manufacturer: Ayre Acoustics [ 350.171418] usb 1-4: SerialNumber: (C) 2010 XMOS/Wavelength Audio [-- Attachment #3: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Alsa: USB Class 2 Audio soundcard device disappears suddenly 2012-07-31 10:12 ` Joao Bonina @ 2012-07-31 11:38 ` Daniel Mack [not found] ` <5017C3AC.4050302-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> 0 siblings, 1 reply; 10+ messages in thread From: Daniel Mack @ 2012-07-31 11:38 UTC (permalink / raw) To: Joao Bonina; +Cc: alsa-devel@alsa-project.org, linux-usb [-- Attachment #1: Type: text/plain, Size: 2738 bytes --] On 31.07.2012 12:12, Joao Bonina wrote: > > > It doesn't show anything when that happens. Well, it shows: [ 349.789200] hub 1-0:1.0: port 4 disabled by hub (EMI?), re-enabling... I guess this about the time when the streaming stops? How does your USB wiring setup look like and what kind of system is that? Smells like a hardware issue, to be honest. You could do some stress-testing by transferring huge amounts of data from one USB storage media to another. Also try replacing the cables maybe. I'm Cc'ing the linux-usb list, maybe someone there has an idea. Daniel > > Looking at dmesg (I'm attaching it), it shows this: > [ 350.170478] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 > [ 350.170500] usb 1-4: config 1 has no interface number 2 > [ 350.170843] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 > [ 350.170864] usb 1-4: config 1 has no interface number 2 > [ 350.171344] usb 1-4: New USB device found, idVendor=21b4, idProduct=0230 > > [ 350.171366] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 350.171385] usb 1-4: Product: Ayre USB Interface > [ 350.171401] usb 1-4: Manufacturer: Ayre Acoustics > [ 350.171418] usb 1-4: SerialNumber: (C) 2010 XMOS/Wavelength Audio > > > Don't know if those 'invalid interface number' messages are relevant for the issue. > > Joao > > > ----- Original Message ----- > From: Daniel Mack <zonque@gmail.com> > To: Joao Bonina <bonina_2001@yahoo.com> > Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org> > Sent: Tuesday, 31 July 2012, 6:24 > Subject: Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly > > On 31.07.2012 00:32, Joao Bonina wrote: >> Hi, >> >> I'm using an USB Class 2 Audio DAC (basically a soundcard) with my Linux box and MPD software. >> >> It works great when playing files stored in a remote share, but when >> playing files from an USB pen, it stops playing in a few minutes. >> >> Mpd.log shows this: >> >> Code: >> Jul 30 13:03 : output: "USB" [alsa] failed to play: No such device >> Jul 30 13:03 : output: closed plugin=alsa name="USB" >> ALSA lib pcm_hw.c:1401:(_snd_pcm_hw_open) Invalid value for card >> Jul 30 13:03 : output: Failed to open "USB" [alsa]: Failed to open ALSA device "hw:0,0": No such file or directoryIt seems to be somewhat related to the USB bus not being able to >> cope with both PCM streaming to the soundcard and reading from the flash pen simultaneously, I guess. >> >> So, anybody faced this issue previously and can provide some hints to solve this? >> >> MPD is 0.17, kernel is 3.2.17, alsa-utils is 1.0.25. > > Does the kernel log or 'dmesg' show anything weird what that happens? > > > Daniel > [-- Attachment #2: dmesg.txt --] [-- Type: text/plain, Size: 20286 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.17-rt28 (root@debian) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 PREEMPT RT Sat Jul 28 23:51:42 WEST 2012 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable) [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7c0000 (usable) [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI not present or invalid. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0xf7c0 max_arch_pfn = 0x100000 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] Base memory trampoline at [c009d000] 9d000 size 4096 [ 0.000000] init_memory_mapping: 0000000000000000-000000000f7c0000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 000f400000 page 2M [ 0.000000] 000f400000 - 000f7c0000 page 4k [ 0.000000] kernel direct mapping tables up to f7c0000 @ 17fb000-1800000 [ 0.000000] RAMDISK: 0b7cd000 - 0ba10000 [ 0.000000] ACPI Error: A valid RSDP was not found (20110623/tbxfroot-219) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 247MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 0f7c0000 [ 0.000000] low ram: 0 - 0f7c0000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0000f7c0 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x0000f7c0 [ 0.000000] On node 0 totalpages: 63310 [ 0.000000] free_area_init_node: node 0, pgdat c13303e0, node_mem_map cf5cf200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3950 pages, LIFO batch:0 [ 0.000000] Normal zone: 464 pages used for memmap [ 0.000000] Normal zone: 58864 pages, LIFO batch:15 [ 0.000000] Allocating PCI resources starting at f7c0000 (gap: f7c0000:f0830000) [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62814 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.17-rt28 root=UUID=db00af1b-7a21-4968-9087-92bb7cb92ee0 ro quiet clocksource=acpi_pm maxcpus=1 [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 244832k/253696k available (2169k kernel code, 8408k reserved, 1112k data, 260k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfffe5000 - 0xfffff000 ( 104 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xcffc0000 - 0xff7fe000 ( 760 MB) [ 0.000000] lowmem : 0xc0000000 - 0xcf7c0000 ( 247 MB) [ 0.000000] .init : 0xc1335000 - 0xc1376000 ( 260 kB) [ 0.000000] .data : 0xc121e645 - 0xc1334980 (1112 kB) [ 0.000000] .text : 0xc1000000 - 0xc121e645 (2169 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] NR_IRQS:16 nr_irqs:16 16 [ 0.000000] CPU 0 irqstacks, hard=cf008000 soft=cf00a000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 498.120 MHz processor. [ 0.002005] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.24 BogoMIPS (lpj=498120) [ 0.002033] pid_max: default: 32768 minimum: 301 [ 0.002333] Mount-cache hash table entries: 512 [ 0.003245] Initializing cgroup subsys cpuacct [ 0.003264] Initializing cgroup subsys devices [ 0.003278] Initializing cgroup subsys freezer [ 0.003292] Initializing cgroup subsys net_cls [ 0.003408] CPU: Geode(TM) Integrated Processor by AMD PCS stepping 02 [ 0.003630] Performance Events: no PMU driver, software events only. [ 0.004660] devtmpfs: initialized [ 0.005498] print_constraints: dummy: [ 0.005739] NET: Registered protocol family 16 [ 0.007809] PCI: PCI BIOS revision 2.10 entry at 0xfa980, last bus=0 [ 0.011107] bio: create slab <bio-0> at 0 [ 0.011435] ACPI: Interpreter disabled. [ 0.011763] PCI: Probing PCI hardware [ 0.011777] PCI: Probing PCI hardware (bus 00) [ 0.012136] pci 0000:00:01.0: [1022:2080] type 0 class 0x000600 [ 0.012302] pci 0000:00:01.0: reg 10: [io 0xac1c-0xac1f] [ 0.013302] pci 0000:00:01.1: [1022:2081] type 0 class 0x000300 [ 0.013698] pci 0000:00:01.1: reg 10: [mem 0xee000000-0xeeffffff] [ 0.014029] pci 0000:00:01.1: reg 14: [mem 0xeffec000-0xeffeffff] [ 0.014327] pci 0000:00:01.1: reg 18: [mem 0xeffe8000-0xeffebfff] [ 0.014625] pci 0000:00:01.1: reg 1c: [mem 0xefff8000-0xefffbfff] [ 0.014923] pci 0000:00:01.1: reg 20: [mem 0xefff4000-0xefff7fff] [ 0.015824] pci 0000:00:01.2: [1022:2082] type 0 class 0x001010 [ 0.016241] pci 0000:00:01.2: reg 10: [mem 0xefff0000-0xefff3fff] [ 0.018178] pci 0000:00:0d.0: [1106:3053] type 0 class 0x000200 [ 0.018275] pci 0000:00:0d.0: reg 10: [io 0xfc00-0xfcff] [ 0.018337] pci 0000:00:0d.0: reg 14: [mem 0xeffff000-0xeffff0ff] [ 0.018649] pci 0000:00:0d.0: supports D1 D2 [ 0.018666] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.018698] pci 0000:00:0d.0: PME# disabled [ 0.018874] pci 0000:00:0f.0: [1022:2090] type 0 class 0x000601 [ 0.019226] pci 0000:00:0f.0: reg 10: [io 0x6000-0x6007] [ 0.019568] pci 0000:00:0f.0: reg 14: [io 0x6100-0x61ff] [ 0.019910] pci 0000:00:0f.0: reg 18: [io 0x6200-0x623f] [ 0.020348] pci 0000:00:0f.0: reg 1c: [io 0x0000-0x001f] [ 0.020696] pci 0000:00:0f.0: reg 20: [io 0x9d00-0x9d7f] [ 0.021025] pci 0000:00:0f.0: reg 24: [io 0x9c00-0x9c3f] [ 0.021699] pci 0000:00:0f.2: [1022:209a] type 0 class 0x000101 [ 0.023147] pci 0000:00:0f.2: reg 20: [io 0xff00-0xff0f] [ 0.024176] pci 0000:00:0f.5: [1022:2095] type 0 class 0x000c03 [ 0.024640] pci 0000:00:0f.5: reg 10: [mem 0xefffe000-0xefffefff] [ 0.026638] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold [ 0.026741] pci 0000:00:0f.5: PME# disabled [ 0.028580] pci 0000:00:0f.0: NatSemi IRQ router [1022:2090] [ 0.028818] PCI: pci_cache_line_size set to 32 bytes [ 0.029267] reserve RAM buffer: 000000000009e800 - 000000000009ffff [ 0.029285] reserve RAM buffer: 000000000f7c0000 - 000000000fffffff [ 0.029781] Switching to clocksource pit [ 0.029945] pnp: PnP ACPI: disabled [ 0.040779] PCI: max bus depth: 0 pci_try_num: 1 [ 0.040824] pci 0000:00:0f.0: BAR 3: assigned [io 0x1000-0x101f] [ 0.040922] pci 0000:00:0f.0: BAR 3: set to [io 0x1000-0x101f] (PCI address [0x1000-0x101f]) [ 0.040948] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.040969] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 0.041151] NET: Registered protocol family 2 [ 0.041367] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.041814] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.042067] TCP bind hash table entries: 8192 (order: 5, 196608 bytes) [ 0.042795] TCP: Hash tables configured (established 8192 bind 8192) [ 0.042810] TCP reno registered [ 0.042829] UDP hash table entries: 128 (order: 1, 8192 bytes) [ 0.042902] UDP-Lite hash table entries: 128 (order: 1, 8192 bytes) [ 0.043221] NET: Registered protocol family 1 [ 0.043341] pci 0000:00:01.1: Boot video device [ 0.043825] PCI: setting IRQ 5 as level-triggered [ 0.043844] pci 0000:00:0f.5: assigned PCI INT D -> IRQ 5 [ 0.044355] PCI: CLS 32 bytes, default 32 [ 0.044636] Unpacking initramfs... [ 0.515824] Freeing initrd memory: 2316k freed [ 0.518564] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.519194] scx200: NatSemi SCx200 Driver [ 0.519876] audit: initializing netlink socket (disabled) [ 0.519921] type=2000 audit(1343728315.518:1): initialized [ 0.708277] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.708903] VFS: Disk quotas dquot_6.5.2 [ 0.708975] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.709449] msgmni has been set to 482 [ 0.710148] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.710166] io scheduler noop registered [ 0.710179] io scheduler deadline registered [ 0.710236] io scheduler cfq registered (default) [ 0.791206] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.812106] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.832959] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.834642] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.837231] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.837273] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.838001] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.838225] rtc0: alarms up to one day, 114 bytes nvram [ 0.838693] rtc-test rtc-test.0: rtc core: registered test as rtc1 [ 0.839112] rtc-test rtc-test.1: rtc core: registered test as rtc2 [ 0.839141] cpuidle: using governor ladder [ 0.839570] TCP cubic registered [ 0.839727] NET: Registered protocol family 10 [ 0.840468] Mobile IPv6 [ 0.840483] NET: Registered protocol family 17 [ 0.840508] Registering the dns_resolver key type [ 0.841224] registered taskstats version 1 [ 0.842190] rtc_cmos rtc_cmos: setting system clock to 2012-07-31 09:51:56 UTC (1343728316) [ 0.842994] Freeing unused kernel memory: 260k freed [ 0.843603] Write protecting the kernel text: 2172k [ 0.843737] Write protecting the kernel read-only data: 948k [ 0.933920] udev[44]: starting version 164 [ 1.523045] Switching to clocksource tsc [ 1.567124] SCSI subsystem initialized [ 2.094375] libata version 3.00 loaded. [ 2.104990] pata_amd 0000:00:0f.2: version 0.4.1 [ 2.112743] scsi0 : pata_amd [ 2.113658] scsi1 : pata_amd [ 2.113959] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 2.113980] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 2.267206] spurious 8259A interrupt: IRQ7. [ 2.276376] ata1.00: CFA: TS4GCF133, 20110407, max UDMA/66 [ 2.276397] ata1.00: 7831152 sectors, multi 0: LBA [ 2.276438] ata1.01: ATA-0: PQI IDE DiskOnModule, YUAN1026, max UDMA/33 [ 2.276460] ata1.01: 1015056 sectors, multi 0: LBA [ 2.283283] ata1.00: configured for UDMA/66 [ 2.286273] ata1.01: configured for UDMA/33 [ 2.297413] scsi 0:0:0:0: Direct-Access ATA TS4GCF133 2011 PQ: 0 ANSI: 5 [ 2.299255] scsi 0:0:1:0: Direct-Access ATA PQI IDE DiskOnMo YUAN PQ: 0 ANSI: 5 [ 2.301427] ata2: port disabled--ignoring [ 2.350975] sd 0:0:0:0: [sda] 7831152 512-byte logical blocks: (4.00 GB/3.73 GiB) [ 2.351297] sd 0:0:0:0: [sda] Write Protect is off [ 2.351319] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.351430] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.354674] sd 0:0:1:0: [sdb] 1015056 512-byte logical blocks: (519 MB/495 MiB) [ 2.354919] sd 0:0:1:0: [sdb] Write Protect is off [ 2.354940] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.355347] sd 0:0:1:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 2.356127] sda: sda1 sda2 [ 2.359915] sdb: unknown partition table [ 2.364252] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 2.364290] sd 0:0:1:0: [sdb] Attached SCSI disk [ 2.854524] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 2.855667] kjournald starting. Commit interval 5 seconds [ 3.651393] udev[161]: starting version 164 [ 4.021770] AMD Geode RNG detected [ 4.055504] cs5535-mfd 0000:00:0f.0: 5 devices registered. [ 4.063278] PCI: setting IRQ 11 as level-triggered [ 4.063301] Geode LX AES 0000:00:01.2: found PCI INT A -> IRQ 11 [ 4.064184] pci 0000:00:01.1: IRQ routing conflict: have IRQ 10, want IRQ 11 [ 4.064240] Geode LX AES 0000:00:01.2: IRQ routing conflict: have IRQ 10, want IRQ 11 [ 4.086509] via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker [ 4.106113] geode-aes: GEODE AES engine enabled. [ 4.106844] PCI: setting IRQ 10 as level-triggered [ 4.106866] via-rhine 0000:00:0d.0: found PCI INT A -> IRQ 10 [ 4.107002] via-rhine 0000:00:0d.0: IRQ routing conflict: have IRQ 11, want IRQ 10 [ 4.107192] via-rhine 0000:00:0d.0: setting latency timer to 64 [ 4.184403] via-rhine 0000:00:0d.0: eth0: VIA Rhine III (Management Adapter) at 0xeffff000, 00:0d:b9:0e:0d:28, IRQ 11 [ 4.199971] via-rhine 0000:00:0d.0: eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link cde1 [ 4.464417] cs5535-mfgpt cs5535-mfgpt: reserved resource region [io 0x6200-0x623f] [ 4.464446] cs5535-mfgpt cs5535-mfgpt: 4 MFGPT timers available [ 4.592612] cs5535-gpio cs5535-gpio: reserved resource region [io 0x6100-0x61ff] [ 4.592761] cs5535-gpio cs5535-gpio: GPIO support successfully loaded. [ 4.630513] cs5535-smb cs5535-smb: SCx200 device 'CS5535 ACB0' registered [ 4.731332] usbcore: registered new interface driver usbfs [ 4.731454] usbcore: registered new interface driver hub [ 4.741190] usbcore: registered new device driver usb [ 4.775581] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 4.775826] ehci_hcd 0000:00:0f.5: found PCI INT D -> IRQ 5 [ 4.785390] ehci_hcd 0000:00:0f.5: setting latency timer to 64 [ 4.785462] ehci_hcd 0000:00:0f.5: EHCI Host Controller [ 4.785558] ehci_hcd 0000:00:0f.5: new USB bus registered, assigned bus number 1 [ 4.814153] ehci_hcd 0000:00:0f.5: irq 5, io mem 0xefffe000 [ 4.820074] ehci_hcd 0000:00:0f.5: USB 2.0 started, EHCI 1.00 [ 4.820198] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.820220] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.820239] usb usb1: Product: EHCI Host Controller [ 4.820255] usb usb1: Manufacturer: Linux 3.2.17-rt28 ehci_hcd [ 4.820272] usb usb1: SerialNumber: 0000:00:0f.5 [ 4.825364] hub 1-0:1.0: USB hub found [ 4.825394] hub 1-0:1.0: 4 ports detected [ 5.127110] usb 1-2: new high-speed USB device number 2 using ehci_hcd [ 5.241789] usb 1-2: New USB device found, idVendor=1a40, idProduct=0201 [ 5.241812] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.241831] usb 1-2: Product: USB 2.0 Hub [MTT] [ 5.242719] hub 1-2:1.0: USB hub found [ 5.242905] hub 1-2:1.0: 7 ports detected [ 5.346116] usb 1-3: new high-speed USB device number 3 using ehci_hcd [ 5.465393] usb 1-3: New USB device found, idVendor=0951, idProduct=1643 [ 5.465416] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.465434] usb 1-3: Product: DataTraveler G3 [ 5.465450] usb 1-3: Manufacturer: Kingston [ 5.465466] usb 1-3: SerialNumber: 001CC0EC346CBC51171B0070 [ 5.569072] usb 1-4: new high-speed USB device number 4 using ehci_hcd [ 5.683467] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 5.683489] usb 1-4: config 1 has no interface number 2 [ 5.683837] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 5.683858] usb 1-4: config 1 has no interface number 2 [ 5.684338] usb 1-4: New USB device found, idVendor=21b4, idProduct=0230 [ 5.684360] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.684379] usb 1-4: Product: Ayre USB Interface [ 5.684395] usb 1-4: Manufacturer: Ayre Acoustics [ 5.684411] usb 1-4: SerialNumber: (C) 2010 XMOS/Wavelength Audio [ 5.796093] Initializing USB Mass Storage driver... [ 5.796584] scsi2 : usb-storage 1-3:1.0 [ 5.798866] usbcore: registered new interface driver usb-storage [ 5.798882] USB Mass Storage support registered. [ 6.022209] usbcore: registered new interface driver snd-usb-audio [ 6.878244] scsi 2:0:0:0: Direct-Access Kingston DataTraveler G3 PMAP PQ: 0 ANSI: 0 CCS [ 7.070956] EXT3-fs (sda1): using internal journal [ 7.256508] fuse init (API version 7.17) [ 8.436629] sd 2:0:0:0: [sdc] 61408128 512-byte logical blocks: (31.4 GB/29.2 GiB) [ 8.437229] sd 2:0:0:0: [sdc] Write Protect is off [ 8.437251] sd 2:0:0:0: [sdc] Mode Sense: 23 00 00 00 [ 8.437860] sd 2:0:0:0: [sdc] No Caching mode page present [ 8.437878] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 8.443364] sd 2:0:0:0: [sdc] No Caching mode page present [ 8.443383] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 8.464206] sdc: sdc1 [ 8.470498] sd 2:0:0:0: [sdc] No Caching mode page present [ 8.470517] sd 2:0:0:0: [sdc] Assuming drive cache: write through [ 8.470538] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 8.535321] w83627hf: w83627hf: Found W83627HF chip at 0x290 [ 8.583768] ppdev: user-space parallel port driver [ 8.611663] parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] [ 8.612355] parport0: irq 7 detected [ 9.621503] EXT3-fs (sdb): warning: maximal mount count reached, running e2fsck is recommended [ 9.621645] kjournald starting. Commit interval 5 seconds [ 9.635548] EXT3-fs (sdb): using internal journal [ 9.635571] EXT3-fs (sdb): mounted filesystem with ordered data mode [ 9.643714] EXT3-fs (sda2): mounted filesystem with ordered data mode [ 9.646086] kjournald starting. Commit interval 5 seconds [ 11.183985] via-rhine 0000:00:0d.0: eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 11.805579] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 22.082042] eth0: no IPv6 routers present [ 123.396170] hub 1-0:1.0: port 4 disabled by hub (EMI?), re-enabling... [ 123.396194] usb 1-4: USB disconnect, device number 4 [ 123.661067] usb 1-4: new high-speed USB device number 5 using ehci_hcd [ 123.775498] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 123.775520] usb 1-4: config 1 has no interface number 2 [ 123.775865] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 123.775886] usb 1-4: config 1 has no interface number 2 [ 123.776366] usb 1-4: New USB device found, idVendor=21b4, idProduct=0230 [ 123.776387] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 123.776406] usb 1-4: Product: Ayre USB Interface [ 123.776422] usb 1-4: Manufacturer: Ayre Acoustics [ 123.776439] usb 1-4: SerialNumber: (C) 2010 XMOS/Wavelength Audio [ 293.957030] sched: RT throttling activated [ 349.789200] hub 1-0:1.0: port 4 disabled by hub (EMI?), re-enabling... [ 349.789224] usb 1-4: USB disconnect, device number 5 [ 350.056082] usb 1-4: new high-speed USB device number 6 using ehci_hcd [ 350.170478] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 350.170500] usb 1-4: config 1 has no interface number 2 [ 350.170843] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 [ 350.170864] usb 1-4: config 1 has no interface number 2 [ 350.171344] usb 1-4: New USB device found, idVendor=21b4, idProduct=0230 [ 350.171366] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 350.171385] usb 1-4: Product: Ayre USB Interface [ 350.171401] usb 1-4: Manufacturer: Ayre Acoustics [ 350.171418] usb 1-4: SerialNumber: (C) 2010 XMOS/Wavelength Audio [-- Attachment #3: Type: text/plain, Size: 0 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <5017C3AC.4050302-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]
* Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly [not found] ` <5017C3AC.4050302-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> @ 2012-07-31 12:04 ` Joao Bonina [not found] ` <1343736296.42529.YahooMailNeo-JJyWuWT5O7BRBbKmAC7my5OW+3bF1jUfVpNB7YpNyf8@public.gmane.org> 0 siblings, 1 reply; 10+ messages in thread From: Joao Bonina @ 2012-07-31 12:04 UTC (permalink / raw) To: Daniel Mack; +Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org, linux-usb You're right about the EMI message, it's happening when the streaming stops. I've tried different cables before, but that didn't solve the problem. The motherboard is an Alix 1D, and I'm using the onboard USB 2.0 ports. If this really is an EMI issue, guess I'll have to source some kind of miniPCI-USB 2.0 card and see if that solves the problem. ----- Original Message ----- From: Daniel Mack <zonque-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> To: Joao Bonina <bonina_2001-/E1597aS9LQAvxtiuMwx3w@public.gmane.org> Cc: "alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org" <alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org>; linux-usb <linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> Sent: Tuesday, 31 July 2012, 12:38 Subject: Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly On 31.07.2012 12:12, Joao Bonina wrote: > > > It doesn't show anything when that happens. Well, it shows: [ 349.789200] hub 1-0:1.0: port 4 disabled by hub (EMI?), re-enabling... I guess this about the time when the streaming stops? How does your USB wiring setup look like and what kind of system is that? Smells like a hardware issue, to be honest. You could do some stress-testing by transferring huge amounts of data from one USB storage media to another. Also try replacing the cables maybe. I'm Cc'ing the linux-usb list, maybe someone there has an idea. Daniel > > Looking at dmesg (I'm attaching it), it shows this: > [ 350.170478] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 > [ 350.170500] usb 1-4: config 1 has no interface number 2 > [ 350.170843] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 > [ 350.170864] usb 1-4: config 1 has no interface number 2 > [ 350.171344] usb 1-4: New USB device found, idVendor=21b4, idProduct=0230 > > [ 350.171366] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 > [ 350.171385] usb 1-4: Product: Ayre USB Interface > [ 350.171401] usb 1-4: Manufacturer: Ayre Acoustics > [ 350.171418] usb 1-4: SerialNumber: (C) 2010 XMOS/Wavelength Audio > > > Don't know if those 'invalid interface number' messages are relevant for the issue. > > Joao > > > ----- Original Message ----- > From: Daniel Mack <zonque-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > To: Joao Bonina <bonina_2001-/E1597aS9LQAvxtiuMwx3w@public.gmane.org> > Cc: "alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org" <alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org> > Sent: Tuesday, 31 July 2012, 6:24 > Subject: Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly > > On 31.07.2012 00:32, Joao Bonina wrote: >> Hi, >> >> I'm using an USB Class 2 Audio DAC (basically a soundcard) with my Linux box and MPD software. >> >> It works great when playing files stored in a remote share, but when >> playing files from an USB pen, it stops playing in a few minutes. >> >> Mpd.log shows this: >> >> Code: >> Jul 30 13:03 : output: "USB" [alsa] failed to play: No such device >> Jul 30 13:03 : output: closed plugin=alsa name="USB" >> ALSA lib pcm_hw.c:1401:(_snd_pcm_hw_open) Invalid value for card >> Jul 30 13:03 : output: Failed to open "USB" [alsa]: Failed to open ALSA device "hw:0,0": No such file or directoryIt seems to be somewhat related to the USB bus not being able to >> cope with both PCM streaming to the soundcard and reading from the flash pen simultaneously, I guess. >> >> So, anybody faced this issue previously and can provide some hints to solve this? >> >> MPD is 0.17, kernel is 3.2.17, alsa-utils is 1.0.25. > > Does the kernel log or 'dmesg' show anything weird what that happens? > > > Daniel > _______________________________________________ Alsa-devel mailing list Alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org http://mailman.alsa-project.org/mailman/listinfo/alsa-devel -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <1343736296.42529.YahooMailNeo-JJyWuWT5O7BRBbKmAC7my5OW+3bF1jUfVpNB7YpNyf8@public.gmane.org>]
* Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly [not found] ` <1343736296.42529.YahooMailNeo-JJyWuWT5O7BRBbKmAC7my5OW+3bF1jUfVpNB7YpNyf8@public.gmane.org> @ 2012-07-31 14:10 ` Daniel Mack 2012-07-31 14:35 ` Alan Stern 1 sibling, 0 replies; 10+ messages in thread From: Daniel Mack @ 2012-07-31 14:10 UTC (permalink / raw) To: Joao Bonina; +Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org, linux-usb A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in email? On 31.07.2012 14:04, Joao Bonina wrote: > You're right about the EMI message, it's happening when the streaming stops. > > I've tried different cables before, but that didn't solve the problem. > > The motherboard is an Alix 1D, and I'm using the onboard USB 2.0 ports. > > If this really is an EMI issue, guess I'll have to source some kind of miniPCI-USB 2.0 card and see if that solves the problem. Yes, try that. It could still be something else than an EMI issue, but something makes the hub reset its ports. Let us know what you find! Daniel > ----- Original Message ----- > From: Daniel Mack <zonque-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> > To: Joao Bonina <bonina_2001-/E1597aS9LQAvxtiuMwx3w@public.gmane.org> > Cc: "alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org" <alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org>; linux-usb <linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org> > Sent: Tuesday, 31 July 2012, 12:38 > Subject: Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly > > On 31.07.2012 12:12, Joao Bonina wrote: >> >> >> It doesn't show anything when that happens. > > Well, it shows: > > [ 349.789200] hub 1-0:1.0: port 4 disabled by hub (EMI?), re-enabling... > > I guess this about the time when the streaming stops? How does your USB > wiring setup look like and what kind of system is that? Smells like a > hardware issue, to be honest. You could do some stress-testing by > transferring huge amounts of data from one USB storage media to another. > Also try replacing the cables maybe. > > I'm Cc'ing the linux-usb list, maybe someone there has an idea. > > > Daniel > > >> >> Looking at dmesg (I'm attaching it), it shows this: >> [ 350.170478] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 >> [ 350.170500] usb 1-4: config 1 has no interface number 2 >> [ 350.170843] usb 1-4: config 1 has an invalid interface number: 3 but max is 2 >> [ 350.170864] usb 1-4: config 1 has no interface number 2 >> [ 350.171344] usb 1-4: New USB device found, idVendor=21b4, idProduct=0230 >> >> [ 350.171366] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 >> [ 350.171385] usb 1-4: Product: Ayre USB Interface >> [ 350.171401] usb 1-4: Manufacturer: Ayre Acoustics >> [ 350.171418] usb 1-4: SerialNumber: (C) 2010 XMOS/Wavelength Audio >> >> >> Don't know if those 'invalid interface number' messages are relevant for the issue. >> >> Joao >> >> >> ----- Original Message ----- >> From: Daniel Mack <zonque-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> >> To: Joao Bonina <bonina_2001-/E1597aS9LQAvxtiuMwx3w@public.gmane.org> >> Cc: "alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org" <alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org> >> Sent: Tuesday, 31 July 2012, 6:24 >> Subject: Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly >> >> On 31.07.2012 00:32, Joao Bonina wrote: >>> Hi, >>> >>> I'm using an USB Class 2 Audio DAC (basically a soundcard) with my Linux box and MPD software. >>> >>> It works great when playing files stored in a remote share, but when >>> playing files from an USB pen, it stops playing in a few minutes. >>> >>> Mpd.log shows this: >>> >>> Code: >>> Jul 30 13:03 : output: "USB" [alsa] failed to play: No such device >>> Jul 30 13:03 : output: closed plugin=alsa name="USB" >>> ALSA lib pcm_hw.c:1401:(_snd_pcm_hw_open) Invalid value for card >>> Jul 30 13:03 : output: Failed to open "USB" [alsa]: Failed to open ALSA device "hw:0,0": No such file or directoryIt seems to be somewhat related to the USB bus not being able to >>> cope with both PCM streaming to the soundcard and reading from the flash pen simultaneously, I guess. >>> >>> So, anybody faced this issue previously and can provide some hints to solve this? >>> >>> MPD is 0.17, kernel is 3.2.17, alsa-utils is 1.0.25. >> >> Does the kernel log or 'dmesg' show anything weird what that happens? >> >> >> Daniel >> > > > _______________________________________________ > Alsa-devel mailing list > Alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org > http://mailman.alsa-project.org/mailman/listinfo/alsa-devel > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly [not found] ` <1343736296.42529.YahooMailNeo-JJyWuWT5O7BRBbKmAC7my5OW+3bF1jUfVpNB7YpNyf8@public.gmane.org> 2012-07-31 14:10 ` Daniel Mack @ 2012-07-31 14:35 ` Alan Stern 2012-08-01 10:07 ` Joao Bonina 1 sibling, 1 reply; 10+ messages in thread From: Alan Stern @ 2012-07-31 14:35 UTC (permalink / raw) To: Joao Bonina Cc: Daniel Mack, alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org, linux-usb On Tue, 31 Jul 2012, Joao Bonina wrote: > You're right about the EMI message, it's happening when the streaming stops. > > I've tried different cables before, but that didn't solve the problem. > > The motherboard is an Alix 1D, and I'm using the onboard USB 2.0 ports. > > If this really is an EMI issue, guess I'll have to source some kind of miniPCI-USB 2.0 card and see if that solves the problem. Another possibility is to put a USB hub before the sound device. That _might_ clean up the signal. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Alsa: USB Class 2 Audio soundcard device disappears suddenly 2012-07-31 14:35 ` Alan Stern @ 2012-08-01 10:07 ` Joao Bonina 2012-08-02 15:10 ` Joao Bonina 0 siblings, 1 reply; 10+ messages in thread From: Joao Bonina @ 2012-08-01 10:07 UTC (permalink / raw) To: Alan Stern; +Cc: alsa-devel@alsa-project.org, linux-usb, Daniel Mack >________________________________ > From: Alan Stern <stern@rowland.harvard.edu> >To: Joao Bonina <bonina_2001@yahoo.com> >Cc: Daniel Mack <zonque@gmail.com>; "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>; linux-usb <linux-usb@vger.kernel.org> >Sent: Tuesday, 31 July 2012, 15:35 >Subject: Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly > >On Tue, 31 Jul 2012, Joao Bonina wrote: > >> You're right about the EMI message, it's happening when the streaming stops. >> >> I've tried different cables before, but that didn't solve the problem. >> >> The motherboard is an Alix 1D, and I'm using the onboard USB 2.0 ports. >> >> If this really is an EMI issue, guess I'll have to source some kind of miniPCI-USB 2.0 card and see if that solves the problem. > >Another possibility is to put a USB hub before the sound device. That >_might_ clean up the signal. > >Alan Stern > Thanks for that suggestion, Alan. I used a cheap hub that I had stashed away. At the begining that seemed to solve the problem. But after a while, some clicks and pops became audible. Disconnected it all for a while, and when I reconnected, the problem was back again with this message on mpd.log: Aug 01 05:57 : output: "USB" [alsa] failed to play: No such device Aug 01 05:57 : output: closed plugin=alsa name="USB" This time, there's no EMI message in dmesg. Still have to try copying files from one usb flash to another. João Bonina > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Alsa: USB Class 2 Audio soundcard device disappears suddenly 2012-08-01 10:07 ` Joao Bonina @ 2012-08-02 15:10 ` Joao Bonina 0 siblings, 0 replies; 10+ messages in thread From: Joao Bonina @ 2012-08-02 15:10 UTC (permalink / raw) To: Joao Bonina, Alan Stern Cc: alsa-devel@alsa-project.org, linux-usb, Daniel Mack ----- Original Message ----- > From: Joao Bonina <bonina_2001@yahoo.com> > To: Alan Stern <stern@rowland.harvard.edu> > Cc: "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>; linux-usb <linux-usb@vger.kernel.org>; Daniel Mack <zonque@gmail.com> > Sent: Wednesday, 1 August 2012, 11:07 > Subject: Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly > > > >> ________________________________ >> From: Alan Stern <stern@rowland.harvard.edu> >> To: Joao Bonina <bonina_2001@yahoo.com> >> Cc: Daniel Mack <zonque@gmail.com>; > "alsa-devel@alsa-project.org" <alsa-devel@alsa-project.org>; > linux-usb <linux-usb@vger.kernel.org> >> Sent: Tuesday, 31 July 2012, 15:35 >> Subject: Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device > disappears suddenly >> >> On Tue, 31 Jul 2012, Joao Bonina wrote: >> >>> You're right about the EMI message, it's happening when the > streaming stops. >>> >>> I've tried different cables before, but that didn't solve the > problem. >>> >>> The motherboard is an Alix 1D, and I'm using the onboard USB 2.0 > ports. >>> >>> If this really is an EMI issue, guess I'll have to source some kind > of miniPCI-USB 2.0 card and see if that solves the problem. >> >> Another possibility is to put a USB hub before the sound device. That >> _might_ clean up the signal. >> >> Alan Stern >> > > > Thanks for that suggestion, Alan. > > I used a cheap hub that I had stashed away. At the begining that seemed to > solve the problem. But after a while, some clicks and pops became audible. > > Disconnected it all for a while, and when I reconnected, the problem was back > again with this message on mpd.log: > > Aug 01 05:57 : output: "USB" [alsa] failed to play: No such device > Aug 01 05:57 : output: closed plugin=alsa name="USB" > > > > This time, there's no EMI message in dmesg. > > > Still have to try copying files from one usb flash to another. > > João Bonina > > Did the copying test and all went well there. Also did a usbmon session with the DAC disconnecting/reconnecting automatically. There was no EMI message in dmesg there, and I'm connecting the DAC through a USB hub. Analyzed the usbmon log with Virtual USB analyzer, but couldn't find reasons there for the disconnection. I'm not very experienced in this subject, so excuse me if I'm missing something obvious here. I have the usbmon log. If someone wants to take a look at it, please let me know and I'll send it. Cheers, Joao Bonina ^ permalink raw reply [flat|nested] 10+ messages in thread
[parent not found: <1343919982.13369.YahooMailNeo@web121604.mail.ne1.yahoo.com>]
[parent not found: <1343919982.13369.YahooMailNeo-JJyWuWT5O7AbWpotXP+qY5OW+3bF1jUfVpNB7YpNyf8@public.gmane.org>]
* Re: [alsa-devel] Alsa: USB Class 2 Audio soundcard device disappears suddenly [not found] ` <1343919982.13369.YahooMailNeo-JJyWuWT5O7AbWpotXP+qY5OW+3bF1jUfVpNB7YpNyf8@public.gmane.org> @ 2012-08-02 15:42 ` Alan Stern 0 siblings, 0 replies; 10+ messages in thread From: Alan Stern @ 2012-08-02 15:42 UTC (permalink / raw) To: Joao Bonina Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org, linux-usb, Daniel Mack On Thu, 2 Aug 2012, Joao Bonina wrote: > Did the copying test and all went well there. > > Also did a usbmon session with the DAC disconnecting/reconnecting > automatically. There was no EMI message in dmesg there, and I'm > connecting the DAC through a USB hub. > > Analyzed the usbmon log with Virtual USB analyzer, but couldn't find > reasons there for the disconnection. I'm not very experienced in this > subject, so excuse me if I'm missing something obvious here. > > I'm attaching the usbmon log if someone wants to take a look at it. > Sorry for the long attachment file. I agree, there's no obvious reason for the disconnection in the log. Possible explanations include a bad cable connection or a bug in the sound card's firmware. Alan Stern -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2012-08-02 15:42 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-07-30 22:32 Alsa: USB Class 2 Audio soundcard device disappears suddenly Joao Bonina
2012-07-31 5:24 ` Daniel Mack
[not found] ` <1343729241.63273.YahooMailNeo@web121603.mail.ne1.yahoo.com>
2012-07-31 10:12 ` Joao Bonina
2012-07-31 11:38 ` Daniel Mack
[not found] ` <5017C3AC.4050302-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2012-07-31 12:04 ` [alsa-devel] " Joao Bonina
[not found] ` <1343736296.42529.YahooMailNeo-JJyWuWT5O7BRBbKmAC7my5OW+3bF1jUfVpNB7YpNyf8@public.gmane.org>
2012-07-31 14:10 ` Daniel Mack
2012-07-31 14:35 ` Alan Stern
2012-08-01 10:07 ` Joao Bonina
2012-08-02 15:10 ` Joao Bonina
[not found] <1343919982.13369.YahooMailNeo@web121604.mail.ne1.yahoo.com>
[not found] ` <1343919982.13369.YahooMailNeo-JJyWuWT5O7AbWpotXP+qY5OW+3bF1jUfVpNB7YpNyf8@public.gmane.org>
2012-08-02 15:42 ` [alsa-devel] " Alan Stern
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.