From: "Arend van Spriel" <arend@broadcom.com>
To: "John W. Linville" <linville@tuxdriver.com>
Cc: "Josh Boyer" <jwboyer@redhat.com>,
"Johannes Berg" <johannes@sipsolutions.net>,
"Brett Rudley" <brudley@broadcom.com>,
"Roland Vossen" <rvossen@broadcom.com>,
linux-wireless@vger.kernel.org, netdev@vger.kernel.org,
"Seth Forshee" <seth.forshee@canonical.com>
Subject: Re: assert_cfg80211_lock warning with Linux v3.5-8833-g2d53492
Date: Wed, 1 Aug 2012 17:38:34 +0200 [thread overview]
Message-ID: <50194D7A.6060400@broadcom.com> (raw)
In-Reply-To: <20120801141810.GB27433@tuxdriver.com>
On 08/01/2012 04:18 PM, John W. Linville wrote:
> On Wed, Aug 01, 2012 at 09:12:33AM -0400, Josh Boyer wrote:
>
>> > [ 26.573028] ------------[ cut here ]------------
>> > [ 26.573042] WARNING: at net/wireless/core.h:125 assert_cfg80211_lock.part.8+0x15/0x17 [cfg80211]()
>> > [ 26.573045] Hardware name: XPS 8300
>> > [ 26.573046] Modules linked in: xt_CHECKSUM iptable_mangle bridge stp llc ip6t_REJECT nf_conntrack_ipv4 nf_conntrack_ipv6 nf_defrag_ipv6 nf_defrag_ipv4 xt_state nf_conntrack ib_iser rdma_cm ib_addr ip6table_filter tpm_bios ip6_tables iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel arc4 brcmsmac snd_hda_codec cordic brcmutil snd_hwdep mac80211 snd_pcm snd_page_alloc snd_timer cfg80211 snd coretemp rfkill serio_raw i2c_i801 soundcore lpc_ich bcma dcdbas microcode mfd_core mei vhost_net tun macvtap macvlan kvm_intel nfsd kvm auth_rpcgss nfs_acl lockd uinput crc32c_intel ghash_clmulni_intel broadcom tg3 usb_storage uas radeon i2c_algo_bit drm_kms_helper ttm drm i2c_core sunrpc be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi
>> > [ 26.573143] Pid: 757, comm: NetworkManager Not tainted 3.6.0-0.rc0.git8.1.fc18.x86_64 #1
>> > [ 26.573145] Call Trace:
>> > [ 26.573153] [<ffffffff8106782f>] warn_slowpath_common+0x7f/0xc0
>> > [ 26.573159] [<ffffffff8106788a>] warn_slowpath_null+0x1a/0x20
>> > [ 26.573170] [<ffffffffa04c730d>] assert_cfg80211_lock.part.8+0x15/0x17 [cfg80211]
>> > [ 26.573181] [<ffffffffa04a8dcb>] freq_reg_info+0x6b/0x80 [cfg80211]
> brcmsmac needs to hold cfg80211_mutex before calling freq_reg_info...
>
> It looks like those calls were added in mid-June.
>
I think mid-june sounds about right. We never observed the warning when
changes to use regulatory infrastructure were tested/reviewed. Should
this precondition be mentioned in cfg80211.h?
Gr. AvS
WARNING: multiple messages have this Message-ID (diff)
From: "Arend van Spriel" <arend-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
To: "John W. Linville" <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
Cc: "Josh Boyer" <jwboyer-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>,
"Johannes Berg"
<johannes-cdvu00un1VgdHxzADdlk8Q@public.gmane.org>,
"Brett Rudley" <brudley-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
"Roland Vossen" <rvossen-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>,
linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
"Seth Forshee"
<seth.forshee-Z7WLFzj8eWMS+FvcfC7Uqw@public.gmane.org>
Subject: Re: assert_cfg80211_lock warning with Linux v3.5-8833-g2d53492
Date: Wed, 1 Aug 2012 17:38:34 +0200 [thread overview]
Message-ID: <50194D7A.6060400@broadcom.com> (raw)
In-Reply-To: <20120801141810.GB27433-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
On 08/01/2012 04:18 PM, John W. Linville wrote:
> On Wed, Aug 01, 2012 at 09:12:33AM -0400, Josh Boyer wrote:
>
>> > [ 26.573028] ------------[ cut here ]------------
>> > [ 26.573042] WARNING: at net/wireless/core.h:125 assert_cfg80211_lock.part.8+0x15/0x17 [cfg80211]()
>> > [ 26.573045] Hardware name: XPS 8300
>> > [ 26.573046] Modules linked in: xt_CHECKSUM iptable_mangle bridge stp llc ip6t_REJECT nf_conntrack_ipv4 nf_conntrack_ipv6 nf_defrag_ipv6 nf_defrag_ipv4 xt_state nf_conntrack ib_iser rdma_cm ib_addr ip6table_filter tpm_bios ip6_tables iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel arc4 brcmsmac snd_hda_codec cordic brcmutil snd_hwdep mac80211 snd_pcm snd_page_alloc snd_timer cfg80211 snd coretemp rfkill serio_raw i2c_i801 soundcore lpc_ich bcma dcdbas microcode mfd_core mei vhost_net tun macvtap macvlan kvm_intel nfsd kvm auth_rpcgss nfs_acl lockd uinput crc32c_intel ghash_clmulni_intel broadcom tg3 usb_storage uas radeon i2c_algo_bit drm_kms_helper ttm drm i2c_core sunrpc be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxg
bi libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi
>> > [ 26.573143] Pid: 757, comm: NetworkManager Not tainted 3.6.0-0.rc0.git8.1.fc18.x86_64 #1
>> > [ 26.573145] Call Trace:
>> > [ 26.573153] [<ffffffff8106782f>] warn_slowpath_common+0x7f/0xc0
>> > [ 26.573159] [<ffffffff8106788a>] warn_slowpath_null+0x1a/0x20
>> > [ 26.573170] [<ffffffffa04c730d>] assert_cfg80211_lock.part.8+0x15/0x17 [cfg80211]
>> > [ 26.573181] [<ffffffffa04a8dcb>] freq_reg_info+0x6b/0x80 [cfg80211]
> brcmsmac needs to hold cfg80211_mutex before calling freq_reg_info...
>
> It looks like those calls were added in mid-June.
>
I think mid-june sounds about right. We never observed the warning when
changes to use regulatory infrastructure were tested/reviewed. Should
this precondition be mentioned in cfg80211.h?
Gr. AvS
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2012-08-01 15:38 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-01 13:12 assert_cfg80211_lock warning with Linux v3.5-8833-g2d53492 Josh Boyer
2012-08-01 13:12 ` Josh Boyer
2012-08-01 14:18 ` John W. Linville
2012-08-01 14:18 ` John W. Linville
2012-08-01 15:38 ` Arend van Spriel [this message]
2012-08-01 15:38 ` Arend van Spriel
2012-08-01 15:51 ` Arend van Spriel
2012-08-01 15:52 ` John W. Linville
2012-08-01 16:40 ` Arend van Spriel
2012-08-01 16:40 ` Arend van Spriel
2012-08-01 15:53 ` Johannes Berg
2012-08-01 15:53 ` Johannes Berg
2012-08-01 16:19 ` Seth Forshee
2012-08-01 17:14 ` Johannes Berg
2012-08-01 17:56 ` Seth Forshee
2012-08-01 17:24 ` Arend van Spriel
2012-08-01 17:24 ` Arend van Spriel
2012-08-01 19:28 ` Arend van Spriel
2012-08-01 19:28 ` Arend van Spriel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50194D7A.6060400@broadcom.com \
--to=arend@broadcom.com \
--cc=brudley@broadcom.com \
--cc=johannes@sipsolutions.net \
--cc=jwboyer@redhat.com \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
--cc=netdev@vger.kernel.org \
--cc=rvossen@broadcom.com \
--cc=seth.forshee@canonical.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.