From: Tom Rini <trini@ti.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH 1/2] omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms
Date: Mon, 13 Aug 2012 07:55:03 -0700 [thread overview]
Message-ID: <50291547.3060307@ti.com> (raw)
In-Reply-To: <CAJ7qFSeOkWj1+gKve9s3FP+mk1Q_rHeJ7EGo+=qi08pJmTnRqQ@mail.gmail.com>
On 08/12/2012 11:28 PM, R, Sricharan wrote:
> Hi Tom,
> On Thu, Aug 9, 2012 at 9:31 PM, Tom Rini <trini@ti.com> wrote:
>> Make the lowlevel_init function that these platforms have which just
>> sets up the stack and calls a C function available to all armv7
>> platforms. As part of this we change some of the macros that are used
>> to be more clear. Previously (except for am335x evm) we had been
>> setting CONFIG_SYS_INIT_SP_ADDR to a series of new defines that are
>> equivalent to simply referencing NON_SECURE_SRAM_END. On am335x evm we
>> should have been doing this initially and do now.
>>
>> Cc: Sricharan R <r.sricharan@ti.com>
>> Signed-off-by: Tom Rini <trini@ti.com>
>> ---
>> arch/arm/cpu/armv7/Makefile | 6 ++-
>> arch/arm/cpu/armv7/lowlevel_init.S | 50 ++++++++++++++++++++++++
>> arch/arm/cpu/armv7/omap-common/lowlevel_init.S | 18 ---------
>> arch/arm/include/asm/arch-am33xx/hardware.h | 3 +-
>> arch/arm/include/asm/arch-am33xx/omap.h | 1 -
>> arch/arm/include/asm/arch-omap4/omap.h | 1 -
>> arch/arm/include/asm/arch-omap5/omap.h | 2 -
>> include/configs/am335x_evm.h | 4 +-
>> include/configs/omap4_common.h | 7 +---
>> include/configs/omap5_evm.h | 7 +---
>> 10 files changed, 63 insertions(+), 36 deletions(-)
>> create mode 100644 arch/arm/cpu/armv7/lowlevel_init.S
>>
>> diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile
>> index 6b2addc..788eada 100644
>> --- a/arch/arm/cpu/armv7/Makefile
>> +++ b/arch/arm/cpu/armv7/Makefile
>> @@ -32,8 +32,12 @@ COBJS += cache_v7.o
>> COBJS += cpu.o
>> COBJS += syslib.o
>>
>> +ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
>> +SOBJS += lowlevel_init.o
>> +endif
>> +
>> SRCS := $(START:.o=.S) $(COBJS:.o=.c)
>> -OBJS := $(addprefix $(obj),$(COBJS))
>> +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
>> START := $(addprefix $(obj),$(START))
>>
>> all: $(obj).depend $(START) $(LIB)
>> diff --git a/arch/arm/cpu/armv7/lowlevel_init.S b/arch/arm/cpu/armv7/lowlevel_init.S
>> new file mode 100644
>> index 0000000..ef04575
>> --- /dev/null
>> +++ b/arch/arm/cpu/armv7/lowlevel_init.S
>> @@ -0,0 +1,50 @@
>> +/*
>> + * A lowlevel_init function that sets up the stack to call a C function to
>> + * perform further init.
>> + *
>> + * (C) Copyright 2010
>> + * Texas Instruments, <www.ti.com>
>> + *
>> + * Author :
>> + * Aneesh V <aneesh@ti.com>
>> + *
>> + * See file CREDITS for list of people who contributed to this
>> + * project.
>> + *
>> + * This program is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of
>> + * the License, or (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
>> + * MA 02111-1307 USA
>> + */
>> +
>> +#include <asm-offsets.h>
>> +#include <config.h>
>> +#include <linux/linkage.h>
>> +
>> +ENTRY(lowlevel_init)
>> + /*
>> + * Setup a temporary stack
>> + */
>> + ldr sp, =CONFIG_SYS_INIT_SP_ADDR
>> +
>> + /*
>> + * Save the old lr(passed in ip) and the current lr to stack
>> + */
>> + push {ip, lr}
>> +
>> + /*
>> + * go setup pll, mux, memory
>> + */
>> + bl s_init
>> + pop {ip, pc}
>> +ENDPROC(lowlevel_init)
>> diff --git a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
>> index ccc6bb6..1ece073 100644
>> --- a/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
>> +++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
>> @@ -78,24 +78,6 @@ ENTRY(save_boot_params)
>> bx lr
>> ENDPROC(save_boot_params)
>>
>> -ENTRY(lowlevel_init)
>> - /*
>> - * Setup a temporary stack
>> - */
>> - ldr sp, =LOW_LEVEL_SRAM_STACK
>> -
>> - /*
>> - * Save the old lr(passed in ip) and the current lr to stack
>> - */
>> - push {ip, lr}
>> -
>> - /*
>> - * go setup pll, mux, memory
>> - */
>> - bl s_init
>> - pop {ip, pc}
>> -ENDPROC(lowlevel_init)
>> -
>> ENTRY(set_pl310_ctrl_reg)
>> PUSH {r4-r11, lr} @ save registers - ROM code may pollute
>> @ our registers
>> diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h
>> index c617331..62332f2 100644
>> --- a/arch/arm/include/asm/arch-am33xx/hardware.h
>> +++ b/arch/arm/include/asm/arch-am33xx/hardware.h
>> @@ -19,8 +19,9 @@
>> #ifndef __AM33XX_HARDWARE_H
>> #define __AM33XX_HARDWARE_H
>>
>> +#include <asm/arch/omap.h>
>> +
>> /* Module base addresses */
>> -#define LOW_LEVEL_SRAM_STACK 0x4030B7FC
>> #define UART0_BASE 0x44E09000
>>
>> /* DM Timer base addresses */
>> diff --git a/arch/arm/include/asm/arch-am33xx/omap.h b/arch/arm/include/asm/arch-am33xx/omap.h
>> index fc2b7a5..850f8a5 100644
>> --- a/arch/arm/include/asm/arch-am33xx/omap.h
>> +++ b/arch/arm/include/asm/arch-am33xx/omap.h
>> @@ -30,7 +30,6 @@
>> */
>> #define NON_SECURE_SRAM_START 0x40304000
>> #define NON_SECURE_SRAM_END 0x4030E000
>> -#define LOW_LEVEL_SRAM_STACK 0x4030B7FC
>>
>> /* ROM code defines */
>> /* Boot device */
>> diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
>> index 03bd923..d4b5076 100644
>> --- a/arch/arm/include/asm/arch-omap4/omap.h
>> +++ b/arch/arm/include/asm/arch-omap4/omap.h
>> @@ -172,7 +172,6 @@ struct control_lpddr2io_regs {
>> /* base address for indirect vectors (internal boot mode) */
>> #define SRAM_ROM_VECT_BASE 0x4030D000
>> /* Temporary SRAM stack used while low level init is done */
>> -#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END
>> #define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START
>> /* SRAM scratch space entries */
>> #define OMAP4_SRAM_SCRATCH_OMAP4_REV SRAM_SCRATCH_SPACE_ADDR
>> diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
>> index 7f05cb5..9dce49a 100644
>> --- a/arch/arm/include/asm/arch-omap5/omap.h
>> +++ b/arch/arm/include/asm/arch-omap5/omap.h
>> @@ -262,8 +262,6 @@ struct omap_sys_ctrl_regs {
>> #define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */
>> /* base address for indirect vectors (internal boot mode) */
>> #define SRAM_ROM_VECT_BASE 0x4031F000
>> -/* Temporary SRAM stack used while low level init is done */
>> -#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END
>>
>> #define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START
>> /*
>> diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
>> index 2bfe8c6..a8a6b8e 100644
>> --- a/include/configs/am335x_evm.h
>> +++ b/include/configs/am335x_evm.h
>> @@ -148,7 +148,7 @@
>> #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
>>
>> #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
>> -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
>> +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
>> GENERATED_GBL_DATA_SIZE)
>> /* Platform/Board specific defs */
>> #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
>> @@ -195,7 +195,7 @@
>> #define CONFIG_SPL
>> #define CONFIG_SPL_TEXT_BASE 0x402F0400
>> #define CONFIG_SPL_MAX_SIZE (46 * 1024)
>> -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
>> +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
>>
>> #define CONFIG_SPL_BSS_START_ADDR 0x80000000
>> #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
>> diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
>> index 6f298a1..2771839 100644
>> --- a/include/configs/omap4_common.h
>> +++ b/include/configs/omap4_common.h
>> @@ -225,10 +225,7 @@
>> #define CONFIG_NR_DRAM_BANKS 1
>>
>> #define CONFIG_SYS_SDRAM_BASE 0x80000000
>> -#define CONFIG_SYS_INIT_RAM_ADDR 0x4030D800
>> -#define CONFIG_SYS_INIT_RAM_SIZE 0x800
>> -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
>> - CONFIG_SYS_INIT_RAM_SIZE - \
>> +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
>> GENERATED_GBL_DATA_SIZE)
>>
>> #ifndef CONFIG_SYS_L2CACHE_OFF
>> @@ -249,7 +246,7 @@
>> #define CONFIG_SPL
>> #define CONFIG_SPL_TEXT_BASE 0x40304350
>> #define CONFIG_SPL_MAX_SIZE (38 * 1024)
>> -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
>> +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
>>
>> /*
>> * 64 bytes before this address should be set aside for u-boot.img's
>> diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
>> index 0884280..4d6de16 100644
>> --- a/include/configs/omap5_evm.h
>> +++ b/include/configs/omap5_evm.h
>> @@ -228,10 +228,7 @@
>> #define CONFIG_NR_DRAM_BANKS 1
>>
>> #define CONFIG_SYS_SDRAM_BASE 0x80000000
>> -#define CONFIG_SYS_INIT_RAM_ADDR 0x4030D800
>> -#define CONFIG_SYS_INIT_RAM_SIZE 0x800
>> -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
>> - CONFIG_SYS_INIT_RAM_SIZE - \
>> +#define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
>> GENERATED_GBL_DATA_SIZE)
>>
>> #define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
>> @@ -246,7 +243,7 @@
>> #define CONFIG_SPL
>> #define CONFIG_SPL_TEXT_BASE 0x40300350
>> #define CONFIG_SPL_MAX_SIZE 0x19000 /* 100K */
>> -#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
>> +#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
>>
>> #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
>> #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
>
> Looks fine cleanup for me.
> A small concern now is the size of available SRAM for
> SPL text is now reduced by GENERATED_GBL_DATA_SIZE, though it is small.
> SRAM size available for SPL code is a concern in OMAP4 platforms.
> Do you prefer keeping CONFIG_SPL_STACK to NON_SECURE_SRAM_END ?
Yes, I would like to keep everyone on the same defines here. 128 bytes
is enough that we can make it up elsewhere (for example re-factoring
emif-common.c as the ddr3 stuff can't be link-time garbage collected but
could be build-time disabled or simply never linked).
--
Tom
next prev parent reply other threads:[~2012-08-13 14:55 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-08-09 16:01 [U-Boot] [PATCH 0/2]: arm: Provide lowlevel_init C function wrapper for v7 Tom Rini
2012-08-09 16:01 ` [U-Boot] [PATCH 1/2] omap4/5/am33xx: Make lowlevel_init available to all armv7 platforms Tom Rini
2012-08-13 6:28 ` R, Sricharan
2012-08-13 14:55 ` Tom Rini [this message]
2012-08-15 18:16 ` Allen Martin
2012-08-09 16:01 ` [U-Boot] [PATCH 2/2] armv7: Make lowlevel_init.S's lowlevel_init do ABI compatible stack Tom Rini
2012-08-15 18:16 ` Allen Martin
2012-08-13 7:48 ` [U-Boot] [PATCH 0/2]: arm: Provide lowlevel_init C function wrapper for v7 Stefano Babic
2012-08-13 14:57 ` Tom Rini
2012-08-15 18:14 ` Allen Martin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=50291547.3060307@ti.com \
--to=trini@ti.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.