* [PATCH v2 0/4] VFIO-based PCI device assignment for QEMU 1.2
@ 2012-08-02 19:17 ` Alex Williamson
0 siblings, 0 replies; 16+ messages in thread
From: Alex Williamson @ 2012-08-02 19:17 UTC (permalink / raw)
To: aliguori; +Cc: aik, jan.kiszka, qemu-devel, kvm
v2:
- Update kernel header update script
- Pull in all changes as a result of that
- Note that vfio.h is non yet and installed header, but I'll
fix that on my next kernel vfio pull request.
- New tag for v2 as noted below.
Thanks,
Alex
VFIO kernel support was just merged into Linux, so I'd like to
formally propose inclusion of the QEMU vfio-pci driver for
QEMU 1.2. Included here is support for x86 PCI device assignment.
PCI INTx is not yet enabled, but devices making use of either MSI
or MSI-X work. The level irqfd and eoifd support I've proposed
for KVM enable an accelerated patch for this through KVM. I'd
like to get this base driver in first and enable the remaining
support in-tree.
I've split this version up a little from the RFC to make it a bit
easier to review. Review comments from Blue Swirl and Avi are
already incorporated, including Avi's requests to simplify both
the PCI BAR mapping and unmapping paths.
This series is also available at:
git://github.com/awilliam/qemu-vfio.git tags/vfio-pci-for-qemu-1.2-v2
Thanks,
Alex
---
Alex Williamson (4):
vfio: Enable vfio-pci and mark supported
vfio: vfio-pci device assignment driver
Update Linux kernel headers
Update kernel header script to include vfio
MAINTAINERS | 5
configure | 12
hw/i386/Makefile.objs | 1
hw/vfio_pci.c | 1853 +++++++++++++++++++++++++++++++++++++
hw/vfio_pci.h | 101 ++
linux-headers/asm-s390/kvm.h | 2
linux-headers/asm-s390/kvm_para.h | 2
linux-headers/asm-x86/kvm.h | 1
linux-headers/asm-x86/kvm_para.h | 7
linux-headers/linux/kvm.h | 3
linux-headers/linux/vfio.h | 368 +++++++
scripts/update-linux-headers.sh | 2
12 files changed, 2354 insertions(+), 3 deletions(-)
create mode 100644 hw/vfio_pci.c
create mode 100644 hw/vfio_pci.h
create mode 100644 linux-headers/linux/vfio.h
^ permalink raw reply [flat|nested] 16+ messages in thread* [Qemu-devel] [PATCH v2 0/4] VFIO-based PCI device assignment for QEMU 1.2 @ 2012-08-02 19:17 ` Alex Williamson 0 siblings, 0 replies; 16+ messages in thread From: Alex Williamson @ 2012-08-02 19:17 UTC (permalink / raw) To: aliguori; +Cc: aik, jan.kiszka, qemu-devel, kvm v2: - Update kernel header update script - Pull in all changes as a result of that - Note that vfio.h is non yet and installed header, but I'll fix that on my next kernel vfio pull request. - New tag for v2 as noted below. Thanks, Alex VFIO kernel support was just merged into Linux, so I'd like to formally propose inclusion of the QEMU vfio-pci driver for QEMU 1.2. Included here is support for x86 PCI device assignment. PCI INTx is not yet enabled, but devices making use of either MSI or MSI-X work. The level irqfd and eoifd support I've proposed for KVM enable an accelerated patch for this through KVM. I'd like to get this base driver in first and enable the remaining support in-tree. I've split this version up a little from the RFC to make it a bit easier to review. Review comments from Blue Swirl and Avi are already incorporated, including Avi's requests to simplify both the PCI BAR mapping and unmapping paths. This series is also available at: git://github.com/awilliam/qemu-vfio.git tags/vfio-pci-for-qemu-1.2-v2 Thanks, Alex --- Alex Williamson (4): vfio: Enable vfio-pci and mark supported vfio: vfio-pci device assignment driver Update Linux kernel headers Update kernel header script to include vfio MAINTAINERS | 5 configure | 12 hw/i386/Makefile.objs | 1 hw/vfio_pci.c | 1853 +++++++++++++++++++++++++++++++++++++ hw/vfio_pci.h | 101 ++ linux-headers/asm-s390/kvm.h | 2 linux-headers/asm-s390/kvm_para.h | 2 linux-headers/asm-x86/kvm.h | 1 linux-headers/asm-x86/kvm_para.h | 7 linux-headers/linux/kvm.h | 3 linux-headers/linux/vfio.h | 368 +++++++ scripts/update-linux-headers.sh | 2 12 files changed, 2354 insertions(+), 3 deletions(-) create mode 100644 hw/vfio_pci.c create mode 100644 hw/vfio_pci.h create mode 100644 linux-headers/linux/vfio.h ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 1/4] Update kernel header script to include vfio 2012-08-02 19:17 ` [Qemu-devel] " Alex Williamson @ 2012-08-02 19:17 ` Alex Williamson -1 siblings, 0 replies; 16+ messages in thread From: Alex Williamson @ 2012-08-02 19:17 UTC (permalink / raw) To: aliguori; +Cc: aik, jan.kiszka, qemu-devel, kvm Signed-off-by: Alex Williamson <alex.williamson@redhat.com> --- scripts/update-linux-headers.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh index 9d2a4bc..270d32b 100755 --- a/scripts/update-linux-headers.sh +++ b/scripts/update-linux-headers.sh @@ -43,7 +43,7 @@ done rm -rf "$output/linux-headers/linux" mkdir -p "$output/linux-headers/linux" -for header in kvm.h kvm_para.h vhost.h virtio_config.h virtio_ring.h; do +for header in kvm.h kvm_para.h vfio.h vhost.h virtio_config.h virtio_ring.h; do cp "$tmpdir/include/linux/$header" "$output/linux-headers/linux" done if [ -L "$linux/source" ]; then ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v2 1/4] Update kernel header script to include vfio @ 2012-08-02 19:17 ` Alex Williamson 0 siblings, 0 replies; 16+ messages in thread From: Alex Williamson @ 2012-08-02 19:17 UTC (permalink / raw) To: aliguori; +Cc: aik, jan.kiszka, qemu-devel, kvm Signed-off-by: Alex Williamson <alex.williamson@redhat.com> --- scripts/update-linux-headers.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/scripts/update-linux-headers.sh b/scripts/update-linux-headers.sh index 9d2a4bc..270d32b 100755 --- a/scripts/update-linux-headers.sh +++ b/scripts/update-linux-headers.sh @@ -43,7 +43,7 @@ done rm -rf "$output/linux-headers/linux" mkdir -p "$output/linux-headers/linux" -for header in kvm.h kvm_para.h vhost.h virtio_config.h virtio_ring.h; do +for header in kvm.h kvm_para.h vfio.h vhost.h virtio_config.h virtio_ring.h; do cp "$tmpdir/include/linux/$header" "$output/linux-headers/linux" done if [ -L "$linux/source" ]; then ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 2/4] Update Linux kernel headers 2012-08-02 19:17 ` [Qemu-devel] " Alex Williamson @ 2012-08-02 19:17 ` Alex Williamson -1 siblings, 0 replies; 16+ messages in thread From: Alex Williamson @ 2012-08-02 19:17 UTC (permalink / raw) To: aliguori; +Cc: aik, jan.kiszka, qemu-devel, kvm Based on Linux as of 1a9b4993. Note that vfio.h isn't yet an installed header at this commit, but will be fixed soon. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> --- linux-headers/asm-s390/kvm.h | 2 linux-headers/asm-s390/kvm_para.h | 2 linux-headers/asm-x86/kvm.h | 1 linux-headers/asm-x86/kvm_para.h | 7 + linux-headers/linux/kvm.h | 3 linux-headers/linux/vfio.h | 368 +++++++++++++++++++++++++++++++++++++ 6 files changed, 381 insertions(+), 2 deletions(-) create mode 100644 linux-headers/linux/vfio.h diff --git a/linux-headers/asm-s390/kvm.h b/linux-headers/asm-s390/kvm.h index bdcbe0f..d25da59 100644 --- a/linux-headers/asm-s390/kvm.h +++ b/linux-headers/asm-s390/kvm.h @@ -1,7 +1,7 @@ #ifndef __LINUX_KVM_S390_H #define __LINUX_KVM_S390_H /* - * asm-s390/kvm.h - KVM s390 specific structures and definitions + * KVM s390 specific structures and definitions * * Copyright IBM Corp. 2008 * diff --git a/linux-headers/asm-s390/kvm_para.h b/linux-headers/asm-s390/kvm_para.h index 8e2dd67..870051f 100644 --- a/linux-headers/asm-s390/kvm_para.h +++ b/linux-headers/asm-s390/kvm_para.h @@ -1,5 +1,5 @@ /* - * asm-s390/kvm_para.h - definition for paravirtual devices on s390 + * definition for paravirtual devices on s390 * * Copyright IBM Corp. 2008 * diff --git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h index e7d1c19..246617e 100644 --- a/linux-headers/asm-x86/kvm.h +++ b/linux-headers/asm-x86/kvm.h @@ -12,6 +12,7 @@ /* Select x86 specific features in <linux/kvm.h> */ #define __KVM_HAVE_PIT #define __KVM_HAVE_IOAPIC +#define __KVM_HAVE_IRQ_LINE #define __KVM_HAVE_DEVICE_ASSIGNMENT #define __KVM_HAVE_MSI #define __KVM_HAVE_USER_NMI diff --git a/linux-headers/asm-x86/kvm_para.h b/linux-headers/asm-x86/kvm_para.h index f2ac46a..a1c3d72 100644 --- a/linux-headers/asm-x86/kvm_para.h +++ b/linux-headers/asm-x86/kvm_para.h @@ -22,6 +22,7 @@ #define KVM_FEATURE_CLOCKSOURCE2 3 #define KVM_FEATURE_ASYNC_PF 4 #define KVM_FEATURE_STEAL_TIME 5 +#define KVM_FEATURE_PV_EOI 6 /* The last 8 bits are used to indicate how to interpret the flags field * in pvclock structure. If no bits are set, all flags are ignored. @@ -37,6 +38,7 @@ #define MSR_KVM_SYSTEM_TIME_NEW 0x4b564d01 #define MSR_KVM_ASYNC_PF_EN 0x4b564d02 #define MSR_KVM_STEAL_TIME 0x4b564d03 +#define MSR_KVM_PV_EOI_EN 0x4b564d04 struct kvm_steal_time { __u64 steal; @@ -89,5 +91,10 @@ struct kvm_vcpu_pv_apf_data { __u32 enabled; }; +#define KVM_PV_EOI_BIT 0 +#define KVM_PV_EOI_MASK (0x1 << KVM_PV_EOI_BIT) +#define KVM_PV_EOI_ENABLED KVM_PV_EOI_MASK +#define KVM_PV_EOI_DISABLED 0x0 + #endif /* _ASM_X86_KVM_PARA_H */ diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h index 5a9d4e3..4b9e575 100644 --- a/linux-headers/linux/kvm.h +++ b/linux-headers/linux/kvm.h @@ -617,6 +617,7 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_SIGNAL_MSI 77 #define KVM_CAP_PPC_GET_SMMU_INFO 78 #define KVM_CAP_S390_COW 79 +#define KVM_CAP_PPC_ALLOC_HTAB 80 #ifdef KVM_CAP_IRQ_ROUTING @@ -828,6 +829,8 @@ struct kvm_s390_ucas_mapping { #define KVM_SIGNAL_MSI _IOW(KVMIO, 0xa5, struct kvm_msi) /* Available with KVM_CAP_PPC_GET_SMMU_INFO */ #define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info) +/* Available with KVM_CAP_PPC_ALLOC_HTAB */ +#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32) /* * ioctls for vcpu fds diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h new file mode 100644 index 0000000..f787b72 --- /dev/null +++ b/linux-headers/linux/vfio.h @@ -0,0 +1,368 @@ +/* + * VFIO API definition + * + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson <alex.williamson@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef VFIO_H +#define VFIO_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +#define VFIO_API_VERSION 0 + + +/* Kernel & User level defines for VFIO IOCTLs. */ + +/* Extensions */ + +#define VFIO_TYPE1_IOMMU 1 + +/* + * The IOCTL interface is designed for extensibility by embedding the + * structure length (argsz) and flags into structures passed between + * kernel and userspace. We therefore use the _IO() macro for these + * defines to avoid implicitly embedding a size into the ioctl request. + * As structure fields are added, argsz will increase to match and flag + * bits will be defined to indicate additional fields with valid data. + * It's *always* the caller's responsibility to indicate the size of + * the structure passed by setting argsz appropriately. + */ + +#define VFIO_TYPE (';') +#define VFIO_BASE 100 + +/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */ + +/** + * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0) + * + * Report the version of the VFIO API. This allows us to bump the entire + * API version should we later need to add or change features in incompatible + * ways. + * Return: VFIO_API_VERSION + * Availability: Always + */ +#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0) + +/** + * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32) + * + * Check whether an extension is supported. + * Return: 0 if not supported, 1 (or some other positive integer) if supported. + * Availability: Always + */ +#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1) + +/** + * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32) + * + * Set the iommu to the given type. The type must be supported by an + * iommu driver as verified by calling CHECK_EXTENSION using the same + * type. A group must be set to this file descriptor before this + * ioctl is available. The IOMMU interfaces enabled by this call are + * specific to the value set. + * Return: 0 on success, -errno on failure + * Availability: When VFIO group attached + */ +#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2) + +/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */ + +/** + * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3, + * struct vfio_group_status) + * + * Retrieve information about the group. Fills in provided + * struct vfio_group_info. Caller sets argsz. + * Return: 0 on succes, -errno on failure. + * Availability: Always + */ +struct vfio_group_status { + __u32 argsz; + __u32 flags; +#define VFIO_GROUP_FLAGS_VIABLE (1 << 0) +#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1) +}; +#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3) + +/** + * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32) + * + * Set the container for the VFIO group to the open VFIO file + * descriptor provided. Groups may only belong to a single + * container. Containers may, at their discretion, support multiple + * groups. Only when a container is set are all of the interfaces + * of the VFIO file descriptor and the VFIO group file descriptor + * available to the user. + * Return: 0 on success, -errno on failure. + * Availability: Always + */ +#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4) + +/** + * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5) + * + * Remove the group from the attached container. This is the + * opposite of the SET_CONTAINER call and returns the group to + * an initial state. All device file descriptors must be released + * prior to calling this interface. When removing the last group + * from a container, the IOMMU will be disabled and all state lost, + * effectively also returning the VFIO file descriptor to an initial + * state. + * Return: 0 on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5) + +/** + * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char) + * + * Return a new file descriptor for the device object described by + * the provided string. The string should match a device listed in + * the devices subdirectory of the IOMMU group sysfs entry. The + * group containing the device must already be added to this context. + * Return: new file descriptor on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6) + +/* --------------- IOCTLs for DEVICE file descriptors --------------- */ + +/** + * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7, + * struct vfio_device_info) + * + * Retrieve information about the device. Fills in provided + * struct vfio_device_info. Caller sets argsz. + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_info { + __u32 argsz; + __u32 flags; +#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ +#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ + __u32 num_regions; /* Max region index + 1 */ + __u32 num_irqs; /* Max IRQ index + 1 */ +}; +#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) + +/** + * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, + * struct vfio_region_info) + * + * Retrieve information about a device region. Caller provides + * struct vfio_region_info with index value set. Caller sets argsz. + * Implementation of region mapping is bus driver specific. This is + * intended to describe MMIO, I/O port, as well as bus specific + * regions (ex. PCI config space). Zero sized regions may be used + * to describe unimplemented regions (ex. unimplemented PCI BARs). + * Return: 0 on success, -errno on failure. + */ +struct vfio_region_info { + __u32 argsz; + __u32 flags; +#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */ +#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */ +#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */ + __u32 index; /* Region index */ + __u32 resv; /* Reserved for alignment */ + __u64 size; /* Region size (bytes) */ + __u64 offset; /* Region offset from start of device fd */ +}; +#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8) + +/** + * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, + * struct vfio_irq_info) + * + * Retrieve information about a device IRQ. Caller provides + * struct vfio_irq_info with index value set. Caller sets argsz. + * Implementation of IRQ mapping is bus driver specific. Indexes + * using multiple IRQs are primarily intended to support MSI-like + * interrupt blocks. Zero count irq blocks may be used to describe + * unimplemented interrupt types. + * + * The EVENTFD flag indicates the interrupt index supports eventfd based + * signaling. + * + * The MASKABLE flags indicates the index supports MASK and UNMASK + * actions described below. + * + * AUTOMASKED indicates that after signaling, the interrupt line is + * automatically masked by VFIO and the user needs to unmask the line + * to receive new interrupts. This is primarily intended to distinguish + * level triggered interrupts. + * + * The NORESIZE flag indicates that the interrupt lines within the index + * are setup as a set and new subindexes cannot be enabled without first + * disabling the entire index. This is used for interrupts like PCI MSI + * and MSI-X where the driver may only use a subset of the available + * indexes, but VFIO needs to enable a specific number of vectors + * upfront. In the case of MSI-X, where the user can enable MSI-X and + * then add and unmask vectors, it's up to userspace to make the decision + * whether to allocate the maximum supported number of vectors or tear + * down setup and incrementally increase the vectors as each is enabled. + */ +struct vfio_irq_info { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_INFO_EVENTFD (1 << 0) +#define VFIO_IRQ_INFO_MASKABLE (1 << 1) +#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2) +#define VFIO_IRQ_INFO_NORESIZE (1 << 3) + __u32 index; /* IRQ index */ + __u32 count; /* Number of IRQs within this index */ +}; +#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9) + +/** + * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set) + * + * Set signaling, masking, and unmasking of interrupts. Caller provides + * struct vfio_irq_set with all fields set. 'start' and 'count' indicate + * the range of subindexes being specified. + * + * The DATA flags specify the type of data provided. If DATA_NONE, the + * operation performs the specified action immediately on the specified + * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]: + * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1. + * + * DATA_BOOL allows sparse support for the same on arrays of interrupts. + * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]): + * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3, + * data = {1,0,1} + * + * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd. + * A value of -1 can be used to either de-assign interrupts if already + * assigned or skip un-assigned interrupts. For example, to set an eventfd + * to be trigger for interrupts [0,0] and [0,2]: + * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3, + * data = {fd1, -1, fd2} + * If index [0,1] is previously set, two count = 1 ioctls calls would be + * required to set [0,0] and [0,2] without changing [0,1]. + * + * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used + * with ACTION_TRIGGER to perform kernel level interrupt loopback testing + * from userspace (ie. simulate hardware triggering). + * + * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER + * enables the interrupt index for the device. Individual subindex interrupts + * can be disabled using the -1 value for DATA_EVENTFD or the index can be + * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0. + * + * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while + * ACTION_TRIGGER specifies kernel->user signaling. + */ +struct vfio_irq_set { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */ +#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */ +#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */ +#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */ +#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */ +#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */ + __u32 index; + __u32 start; + __u32 count; + __u8 data[]; +}; +#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10) + +#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \ + VFIO_IRQ_SET_DATA_BOOL | \ + VFIO_IRQ_SET_DATA_EVENTFD) +#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \ + VFIO_IRQ_SET_ACTION_UNMASK | \ + VFIO_IRQ_SET_ACTION_TRIGGER) +/** + * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11) + * + * Reset a device. + */ +#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) + +/* + * The VFIO-PCI bus driver makes use of the following fixed region and + * IRQ index mapping. Unimplemented regions return a size of zero. + * Unimplemented IRQ types return a count of zero. + */ + +enum { + VFIO_PCI_BAR0_REGION_INDEX, + VFIO_PCI_BAR1_REGION_INDEX, + VFIO_PCI_BAR2_REGION_INDEX, + VFIO_PCI_BAR3_REGION_INDEX, + VFIO_PCI_BAR4_REGION_INDEX, + VFIO_PCI_BAR5_REGION_INDEX, + VFIO_PCI_ROM_REGION_INDEX, + VFIO_PCI_CONFIG_REGION_INDEX, + VFIO_PCI_NUM_REGIONS +}; + +enum { + VFIO_PCI_INTX_IRQ_INDEX, + VFIO_PCI_MSI_IRQ_INDEX, + VFIO_PCI_MSIX_IRQ_INDEX, + VFIO_PCI_NUM_IRQS +}; + +/* -------- API for Type1 VFIO IOMMU -------- */ + +/** + * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info) + * + * Retrieve information about the IOMMU object. Fills in provided + * struct vfio_iommu_info. Caller sets argsz. + * + * XXX Should we do these by CHECK_EXTENSION too? + */ +struct vfio_iommu_type1_info { + __u32 argsz; + __u32 flags; +#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */ + __u64 iova_pgsizes; /* Bitmap of supported page sizes */ +}; + +#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) + +/** + * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map) + * + * Map process virtual addresses to IO virtual addresses using the + * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required. + */ +struct vfio_iommu_type1_dma_map { + __u32 argsz; + __u32 flags; +#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */ +#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */ + __u64 vaddr; /* Process virtual address */ + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) + +/** + * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap) + * + * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. + * Caller sets argsz. + */ +struct vfio_iommu_type1_dma_unmap { + __u32 argsz; + __u32 flags; + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) + +#endif /* VFIO_H */ ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v2 2/4] Update Linux kernel headers @ 2012-08-02 19:17 ` Alex Williamson 0 siblings, 0 replies; 16+ messages in thread From: Alex Williamson @ 2012-08-02 19:17 UTC (permalink / raw) To: aliguori; +Cc: aik, jan.kiszka, qemu-devel, kvm Based on Linux as of 1a9b4993. Note that vfio.h isn't yet an installed header at this commit, but will be fixed soon. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> --- linux-headers/asm-s390/kvm.h | 2 linux-headers/asm-s390/kvm_para.h | 2 linux-headers/asm-x86/kvm.h | 1 linux-headers/asm-x86/kvm_para.h | 7 + linux-headers/linux/kvm.h | 3 linux-headers/linux/vfio.h | 368 +++++++++++++++++++++++++++++++++++++ 6 files changed, 381 insertions(+), 2 deletions(-) create mode 100644 linux-headers/linux/vfio.h diff --git a/linux-headers/asm-s390/kvm.h b/linux-headers/asm-s390/kvm.h index bdcbe0f..d25da59 100644 --- a/linux-headers/asm-s390/kvm.h +++ b/linux-headers/asm-s390/kvm.h @@ -1,7 +1,7 @@ #ifndef __LINUX_KVM_S390_H #define __LINUX_KVM_S390_H /* - * asm-s390/kvm.h - KVM s390 specific structures and definitions + * KVM s390 specific structures and definitions * * Copyright IBM Corp. 2008 * diff --git a/linux-headers/asm-s390/kvm_para.h b/linux-headers/asm-s390/kvm_para.h index 8e2dd67..870051f 100644 --- a/linux-headers/asm-s390/kvm_para.h +++ b/linux-headers/asm-s390/kvm_para.h @@ -1,5 +1,5 @@ /* - * asm-s390/kvm_para.h - definition for paravirtual devices on s390 + * definition for paravirtual devices on s390 * * Copyright IBM Corp. 2008 * diff --git a/linux-headers/asm-x86/kvm.h b/linux-headers/asm-x86/kvm.h index e7d1c19..246617e 100644 --- a/linux-headers/asm-x86/kvm.h +++ b/linux-headers/asm-x86/kvm.h @@ -12,6 +12,7 @@ /* Select x86 specific features in <linux/kvm.h> */ #define __KVM_HAVE_PIT #define __KVM_HAVE_IOAPIC +#define __KVM_HAVE_IRQ_LINE #define __KVM_HAVE_DEVICE_ASSIGNMENT #define __KVM_HAVE_MSI #define __KVM_HAVE_USER_NMI diff --git a/linux-headers/asm-x86/kvm_para.h b/linux-headers/asm-x86/kvm_para.h index f2ac46a..a1c3d72 100644 --- a/linux-headers/asm-x86/kvm_para.h +++ b/linux-headers/asm-x86/kvm_para.h @@ -22,6 +22,7 @@ #define KVM_FEATURE_CLOCKSOURCE2 3 #define KVM_FEATURE_ASYNC_PF 4 #define KVM_FEATURE_STEAL_TIME 5 +#define KVM_FEATURE_PV_EOI 6 /* The last 8 bits are used to indicate how to interpret the flags field * in pvclock structure. If no bits are set, all flags are ignored. @@ -37,6 +38,7 @@ #define MSR_KVM_SYSTEM_TIME_NEW 0x4b564d01 #define MSR_KVM_ASYNC_PF_EN 0x4b564d02 #define MSR_KVM_STEAL_TIME 0x4b564d03 +#define MSR_KVM_PV_EOI_EN 0x4b564d04 struct kvm_steal_time { __u64 steal; @@ -89,5 +91,10 @@ struct kvm_vcpu_pv_apf_data { __u32 enabled; }; +#define KVM_PV_EOI_BIT 0 +#define KVM_PV_EOI_MASK (0x1 << KVM_PV_EOI_BIT) +#define KVM_PV_EOI_ENABLED KVM_PV_EOI_MASK +#define KVM_PV_EOI_DISABLED 0x0 + #endif /* _ASM_X86_KVM_PARA_H */ diff --git a/linux-headers/linux/kvm.h b/linux-headers/linux/kvm.h index 5a9d4e3..4b9e575 100644 --- a/linux-headers/linux/kvm.h +++ b/linux-headers/linux/kvm.h @@ -617,6 +617,7 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_SIGNAL_MSI 77 #define KVM_CAP_PPC_GET_SMMU_INFO 78 #define KVM_CAP_S390_COW 79 +#define KVM_CAP_PPC_ALLOC_HTAB 80 #ifdef KVM_CAP_IRQ_ROUTING @@ -828,6 +829,8 @@ struct kvm_s390_ucas_mapping { #define KVM_SIGNAL_MSI _IOW(KVMIO, 0xa5, struct kvm_msi) /* Available with KVM_CAP_PPC_GET_SMMU_INFO */ #define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info) +/* Available with KVM_CAP_PPC_ALLOC_HTAB */ +#define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32) /* * ioctls for vcpu fds diff --git a/linux-headers/linux/vfio.h b/linux-headers/linux/vfio.h new file mode 100644 index 0000000..f787b72 --- /dev/null +++ b/linux-headers/linux/vfio.h @@ -0,0 +1,368 @@ +/* + * VFIO API definition + * + * Copyright (C) 2012 Red Hat, Inc. All rights reserved. + * Author: Alex Williamson <alex.williamson@redhat.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef VFIO_H +#define VFIO_H + +#include <linux/types.h> +#include <linux/ioctl.h> + +#define VFIO_API_VERSION 0 + + +/* Kernel & User level defines for VFIO IOCTLs. */ + +/* Extensions */ + +#define VFIO_TYPE1_IOMMU 1 + +/* + * The IOCTL interface is designed for extensibility by embedding the + * structure length (argsz) and flags into structures passed between + * kernel and userspace. We therefore use the _IO() macro for these + * defines to avoid implicitly embedding a size into the ioctl request. + * As structure fields are added, argsz will increase to match and flag + * bits will be defined to indicate additional fields with valid data. + * It's *always* the caller's responsibility to indicate the size of + * the structure passed by setting argsz appropriately. + */ + +#define VFIO_TYPE (';') +#define VFIO_BASE 100 + +/* -------- IOCTLs for VFIO file descriptor (/dev/vfio/vfio) -------- */ + +/** + * VFIO_GET_API_VERSION - _IO(VFIO_TYPE, VFIO_BASE + 0) + * + * Report the version of the VFIO API. This allows us to bump the entire + * API version should we later need to add or change features in incompatible + * ways. + * Return: VFIO_API_VERSION + * Availability: Always + */ +#define VFIO_GET_API_VERSION _IO(VFIO_TYPE, VFIO_BASE + 0) + +/** + * VFIO_CHECK_EXTENSION - _IOW(VFIO_TYPE, VFIO_BASE + 1, __u32) + * + * Check whether an extension is supported. + * Return: 0 if not supported, 1 (or some other positive integer) if supported. + * Availability: Always + */ +#define VFIO_CHECK_EXTENSION _IO(VFIO_TYPE, VFIO_BASE + 1) + +/** + * VFIO_SET_IOMMU - _IOW(VFIO_TYPE, VFIO_BASE + 2, __s32) + * + * Set the iommu to the given type. The type must be supported by an + * iommu driver as verified by calling CHECK_EXTENSION using the same + * type. A group must be set to this file descriptor before this + * ioctl is available. The IOMMU interfaces enabled by this call are + * specific to the value set. + * Return: 0 on success, -errno on failure + * Availability: When VFIO group attached + */ +#define VFIO_SET_IOMMU _IO(VFIO_TYPE, VFIO_BASE + 2) + +/* -------- IOCTLs for GROUP file descriptors (/dev/vfio/$GROUP) -------- */ + +/** + * VFIO_GROUP_GET_STATUS - _IOR(VFIO_TYPE, VFIO_BASE + 3, + * struct vfio_group_status) + * + * Retrieve information about the group. Fills in provided + * struct vfio_group_info. Caller sets argsz. + * Return: 0 on succes, -errno on failure. + * Availability: Always + */ +struct vfio_group_status { + __u32 argsz; + __u32 flags; +#define VFIO_GROUP_FLAGS_VIABLE (1 << 0) +#define VFIO_GROUP_FLAGS_CONTAINER_SET (1 << 1) +}; +#define VFIO_GROUP_GET_STATUS _IO(VFIO_TYPE, VFIO_BASE + 3) + +/** + * VFIO_GROUP_SET_CONTAINER - _IOW(VFIO_TYPE, VFIO_BASE + 4, __s32) + * + * Set the container for the VFIO group to the open VFIO file + * descriptor provided. Groups may only belong to a single + * container. Containers may, at their discretion, support multiple + * groups. Only when a container is set are all of the interfaces + * of the VFIO file descriptor and the VFIO group file descriptor + * available to the user. + * Return: 0 on success, -errno on failure. + * Availability: Always + */ +#define VFIO_GROUP_SET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 4) + +/** + * VFIO_GROUP_UNSET_CONTAINER - _IO(VFIO_TYPE, VFIO_BASE + 5) + * + * Remove the group from the attached container. This is the + * opposite of the SET_CONTAINER call and returns the group to + * an initial state. All device file descriptors must be released + * prior to calling this interface. When removing the last group + * from a container, the IOMMU will be disabled and all state lost, + * effectively also returning the VFIO file descriptor to an initial + * state. + * Return: 0 on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_UNSET_CONTAINER _IO(VFIO_TYPE, VFIO_BASE + 5) + +/** + * VFIO_GROUP_GET_DEVICE_FD - _IOW(VFIO_TYPE, VFIO_BASE + 6, char) + * + * Return a new file descriptor for the device object described by + * the provided string. The string should match a device listed in + * the devices subdirectory of the IOMMU group sysfs entry. The + * group containing the device must already be added to this context. + * Return: new file descriptor on success, -errno on failure. + * Availability: When attached to container + */ +#define VFIO_GROUP_GET_DEVICE_FD _IO(VFIO_TYPE, VFIO_BASE + 6) + +/* --------------- IOCTLs for DEVICE file descriptors --------------- */ + +/** + * VFIO_DEVICE_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 7, + * struct vfio_device_info) + * + * Retrieve information about the device. Fills in provided + * struct vfio_device_info. Caller sets argsz. + * Return: 0 on success, -errno on failure. + */ +struct vfio_device_info { + __u32 argsz; + __u32 flags; +#define VFIO_DEVICE_FLAGS_RESET (1 << 0) /* Device supports reset */ +#define VFIO_DEVICE_FLAGS_PCI (1 << 1) /* vfio-pci device */ + __u32 num_regions; /* Max region index + 1 */ + __u32 num_irqs; /* Max IRQ index + 1 */ +}; +#define VFIO_DEVICE_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 7) + +/** + * VFIO_DEVICE_GET_REGION_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 8, + * struct vfio_region_info) + * + * Retrieve information about a device region. Caller provides + * struct vfio_region_info with index value set. Caller sets argsz. + * Implementation of region mapping is bus driver specific. This is + * intended to describe MMIO, I/O port, as well as bus specific + * regions (ex. PCI config space). Zero sized regions may be used + * to describe unimplemented regions (ex. unimplemented PCI BARs). + * Return: 0 on success, -errno on failure. + */ +struct vfio_region_info { + __u32 argsz; + __u32 flags; +#define VFIO_REGION_INFO_FLAG_READ (1 << 0) /* Region supports read */ +#define VFIO_REGION_INFO_FLAG_WRITE (1 << 1) /* Region supports write */ +#define VFIO_REGION_INFO_FLAG_MMAP (1 << 2) /* Region supports mmap */ + __u32 index; /* Region index */ + __u32 resv; /* Reserved for alignment */ + __u64 size; /* Region size (bytes) */ + __u64 offset; /* Region offset from start of device fd */ +}; +#define VFIO_DEVICE_GET_REGION_INFO _IO(VFIO_TYPE, VFIO_BASE + 8) + +/** + * VFIO_DEVICE_GET_IRQ_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 9, + * struct vfio_irq_info) + * + * Retrieve information about a device IRQ. Caller provides + * struct vfio_irq_info with index value set. Caller sets argsz. + * Implementation of IRQ mapping is bus driver specific. Indexes + * using multiple IRQs are primarily intended to support MSI-like + * interrupt blocks. Zero count irq blocks may be used to describe + * unimplemented interrupt types. + * + * The EVENTFD flag indicates the interrupt index supports eventfd based + * signaling. + * + * The MASKABLE flags indicates the index supports MASK and UNMASK + * actions described below. + * + * AUTOMASKED indicates that after signaling, the interrupt line is + * automatically masked by VFIO and the user needs to unmask the line + * to receive new interrupts. This is primarily intended to distinguish + * level triggered interrupts. + * + * The NORESIZE flag indicates that the interrupt lines within the index + * are setup as a set and new subindexes cannot be enabled without first + * disabling the entire index. This is used for interrupts like PCI MSI + * and MSI-X where the driver may only use a subset of the available + * indexes, but VFIO needs to enable a specific number of vectors + * upfront. In the case of MSI-X, where the user can enable MSI-X and + * then add and unmask vectors, it's up to userspace to make the decision + * whether to allocate the maximum supported number of vectors or tear + * down setup and incrementally increase the vectors as each is enabled. + */ +struct vfio_irq_info { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_INFO_EVENTFD (1 << 0) +#define VFIO_IRQ_INFO_MASKABLE (1 << 1) +#define VFIO_IRQ_INFO_AUTOMASKED (1 << 2) +#define VFIO_IRQ_INFO_NORESIZE (1 << 3) + __u32 index; /* IRQ index */ + __u32 count; /* Number of IRQs within this index */ +}; +#define VFIO_DEVICE_GET_IRQ_INFO _IO(VFIO_TYPE, VFIO_BASE + 9) + +/** + * VFIO_DEVICE_SET_IRQS - _IOW(VFIO_TYPE, VFIO_BASE + 10, struct vfio_irq_set) + * + * Set signaling, masking, and unmasking of interrupts. Caller provides + * struct vfio_irq_set with all fields set. 'start' and 'count' indicate + * the range of subindexes being specified. + * + * The DATA flags specify the type of data provided. If DATA_NONE, the + * operation performs the specified action immediately on the specified + * interrupt(s). For example, to unmask AUTOMASKED interrupt [0,0]: + * flags = (DATA_NONE|ACTION_UNMASK), index = 0, start = 0, count = 1. + * + * DATA_BOOL allows sparse support for the same on arrays of interrupts. + * For example, to mask interrupts [0,1] and [0,3] (but not [0,2]): + * flags = (DATA_BOOL|ACTION_MASK), index = 0, start = 1, count = 3, + * data = {1,0,1} + * + * DATA_EVENTFD binds the specified ACTION to the provided __s32 eventfd. + * A value of -1 can be used to either de-assign interrupts if already + * assigned or skip un-assigned interrupts. For example, to set an eventfd + * to be trigger for interrupts [0,0] and [0,2]: + * flags = (DATA_EVENTFD|ACTION_TRIGGER), index = 0, start = 0, count = 3, + * data = {fd1, -1, fd2} + * If index [0,1] is previously set, two count = 1 ioctls calls would be + * required to set [0,0] and [0,2] without changing [0,1]. + * + * Once a signaling mechanism is set, DATA_BOOL or DATA_NONE can be used + * with ACTION_TRIGGER to perform kernel level interrupt loopback testing + * from userspace (ie. simulate hardware triggering). + * + * Setting of an event triggering mechanism to userspace for ACTION_TRIGGER + * enables the interrupt index for the device. Individual subindex interrupts + * can be disabled using the -1 value for DATA_EVENTFD or the index can be + * disabled as a whole with: flags = (DATA_NONE|ACTION_TRIGGER), count = 0. + * + * Note that ACTION_[UN]MASK specify user->kernel signaling (irqfds) while + * ACTION_TRIGGER specifies kernel->user signaling. + */ +struct vfio_irq_set { + __u32 argsz; + __u32 flags; +#define VFIO_IRQ_SET_DATA_NONE (1 << 0) /* Data not present */ +#define VFIO_IRQ_SET_DATA_BOOL (1 << 1) /* Data is bool (u8) */ +#define VFIO_IRQ_SET_DATA_EVENTFD (1 << 2) /* Data is eventfd (s32) */ +#define VFIO_IRQ_SET_ACTION_MASK (1 << 3) /* Mask interrupt */ +#define VFIO_IRQ_SET_ACTION_UNMASK (1 << 4) /* Unmask interrupt */ +#define VFIO_IRQ_SET_ACTION_TRIGGER (1 << 5) /* Trigger interrupt */ + __u32 index; + __u32 start; + __u32 count; + __u8 data[]; +}; +#define VFIO_DEVICE_SET_IRQS _IO(VFIO_TYPE, VFIO_BASE + 10) + +#define VFIO_IRQ_SET_DATA_TYPE_MASK (VFIO_IRQ_SET_DATA_NONE | \ + VFIO_IRQ_SET_DATA_BOOL | \ + VFIO_IRQ_SET_DATA_EVENTFD) +#define VFIO_IRQ_SET_ACTION_TYPE_MASK (VFIO_IRQ_SET_ACTION_MASK | \ + VFIO_IRQ_SET_ACTION_UNMASK | \ + VFIO_IRQ_SET_ACTION_TRIGGER) +/** + * VFIO_DEVICE_RESET - _IO(VFIO_TYPE, VFIO_BASE + 11) + * + * Reset a device. + */ +#define VFIO_DEVICE_RESET _IO(VFIO_TYPE, VFIO_BASE + 11) + +/* + * The VFIO-PCI bus driver makes use of the following fixed region and + * IRQ index mapping. Unimplemented regions return a size of zero. + * Unimplemented IRQ types return a count of zero. + */ + +enum { + VFIO_PCI_BAR0_REGION_INDEX, + VFIO_PCI_BAR1_REGION_INDEX, + VFIO_PCI_BAR2_REGION_INDEX, + VFIO_PCI_BAR3_REGION_INDEX, + VFIO_PCI_BAR4_REGION_INDEX, + VFIO_PCI_BAR5_REGION_INDEX, + VFIO_PCI_ROM_REGION_INDEX, + VFIO_PCI_CONFIG_REGION_INDEX, + VFIO_PCI_NUM_REGIONS +}; + +enum { + VFIO_PCI_INTX_IRQ_INDEX, + VFIO_PCI_MSI_IRQ_INDEX, + VFIO_PCI_MSIX_IRQ_INDEX, + VFIO_PCI_NUM_IRQS +}; + +/* -------- API for Type1 VFIO IOMMU -------- */ + +/** + * VFIO_IOMMU_GET_INFO - _IOR(VFIO_TYPE, VFIO_BASE + 12, struct vfio_iommu_info) + * + * Retrieve information about the IOMMU object. Fills in provided + * struct vfio_iommu_info. Caller sets argsz. + * + * XXX Should we do these by CHECK_EXTENSION too? + */ +struct vfio_iommu_type1_info { + __u32 argsz; + __u32 flags; +#define VFIO_IOMMU_INFO_PGSIZES (1 << 0) /* supported page sizes info */ + __u64 iova_pgsizes; /* Bitmap of supported page sizes */ +}; + +#define VFIO_IOMMU_GET_INFO _IO(VFIO_TYPE, VFIO_BASE + 12) + +/** + * VFIO_IOMMU_MAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 13, struct vfio_dma_map) + * + * Map process virtual addresses to IO virtual addresses using the + * provided struct vfio_dma_map. Caller sets argsz. READ &/ WRITE required. + */ +struct vfio_iommu_type1_dma_map { + __u32 argsz; + __u32 flags; +#define VFIO_DMA_MAP_FLAG_READ (1 << 0) /* readable from device */ +#define VFIO_DMA_MAP_FLAG_WRITE (1 << 1) /* writable from device */ + __u64 vaddr; /* Process virtual address */ + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_MAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 13) + +/** + * VFIO_IOMMU_UNMAP_DMA - _IOW(VFIO_TYPE, VFIO_BASE + 14, struct vfio_dma_unmap) + * + * Unmap IO virtual addresses using the provided struct vfio_dma_unmap. + * Caller sets argsz. + */ +struct vfio_iommu_type1_dma_unmap { + __u32 argsz; + __u32 flags; + __u64 iova; /* IO virtual address */ + __u64 size; /* Size of mapping (bytes) */ +}; + +#define VFIO_IOMMU_UNMAP_DMA _IO(VFIO_TYPE, VFIO_BASE + 14) + +#endif /* VFIO_H */ ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [PATCH v2 3/4] vfio: vfio-pci device assignment driver 2012-08-02 19:17 ` [Qemu-devel] " Alex Williamson @ 2012-08-02 19:17 ` Alex Williamson -1 siblings, 0 replies; 16+ messages in thread From: Alex Williamson @ 2012-08-02 19:17 UTC (permalink / raw) To: aliguori; +Cc: qemu-devel, kvm, jan.kiszka, aik This adds the core of the QEMU VFIO-based PCI device assignment driver. To make use of this driver, enable CONFIG_VFIO, CONFIG_VFIO_IOMMU_TYPE1, and CONFIG_VFIO_PCI in your host Linux kernel config. Load the vfio-pci module. To assign device 0000:05:00.0 to a guest, do the following: for dev in $(ls /sys/bus/pci/devices/0000:05:00.0/iommu_group/devices); do vendor=$(cat /sys/bus/pci/devices/$dev/vendor) device=$(cat /sys/bus/pci/devices/$dev/device) if [ -e /sys/bus/pci/devices/$dev/driver ]; then echo $dev > /sys/bus/pci/devices/$dev/driver/unbind fi echo $vendor $device > /sys/bus/pci/drivers/vfio-pci/new_id done See Documentation/vfio.txt in the Linux kernel tree for further description of IOMMU groups and VFIO. Then launch qemu including the option: -device vfio-pci,host=0000:05:00.0 Support for legacy PCI interrupts (INTx) is not yet included and will be added in a future update. Both MSI and MSI-X are supported here. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> --- hw/vfio_pci.c | 1853 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ hw/vfio_pci.h | 101 +++ 2 files changed, 1954 insertions(+) create mode 100644 hw/vfio_pci.c create mode 100644 hw/vfio_pci.h diff --git a/hw/vfio_pci.c b/hw/vfio_pci.c new file mode 100644 index 0000000..71bb1bd --- /dev/null +++ b/hw/vfio_pci.c @@ -0,0 +1,1853 @@ +/* + * vfio based device assignment support + * + * Copyright Red Hat, Inc. 2012 + * + * Authors: + * Alex Williamson <alex.williamson@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + * Based on qemu-kvm device-assignment: + * Adapted for KVM by Qumranet. + * Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com) + * Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com) + * Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com) + * Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com) + * Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com) + */ + +#include <dirent.h> +#include <unistd.h> +#include <sys/ioctl.h> +#include <sys/mman.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <linux/vfio.h> + +#include "config.h" +#include "event_notifier.h" +#include "exec-memory.h" +#include "kvm.h" +#include "memory.h" +#include "msi.h" +#include "msix.h" +#include "qemu-error.h" +#include "range.h" +#include "vfio_pci.h" + +/* #define DEBUG_VFIO */ +#ifdef DEBUG_VFIO +#define DPRINTF(fmt, ...) \ + do { fprintf(stderr, "vfio: " fmt, ## __VA_ARGS__); } while (0) +#else +#define DPRINTF(fmt, ...) \ + do { } while (0) +#endif + +#define MSIX_CAP_LENGTH 12 + +static QLIST_HEAD(, VFIOContainer) + container_list = QLIST_HEAD_INITIALIZER(container_list); + +static QLIST_HEAD(, VFIOGroup) + group_list = QLIST_HEAD_INITIALIZER(group_list); + +static void vfio_disable_interrupts(VFIODevice *vdev); +static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len); + +/* + * Common VFIO interrupt disable + */ +static void vfio_disable_irqindex(VFIODevice *vdev, int index) +{ + struct vfio_irq_set irq_set = { + .argsz = sizeof(irq_set), + .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER, + .index = index, + .start = 0, + .count = 0, + }; + + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); + + vdev->interrupt = INT_NONE; +} + +/* + * INTx + */ +static void vfio_unmask_intx(VFIODevice *vdev) +{ + struct vfio_irq_set irq_set = { + .argsz = sizeof(irq_set), + .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK, + .index = VFIO_PCI_INTX_IRQ_INDEX, + .start = 0, + .count = 1, + }; + + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); +} + +static void vfio_intx_interrupt(void *opaque) +{ + VFIODevice *vdev = opaque; + + if (!event_notifier_test_and_clear(&vdev->intx.interrupt)) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) Pin %c\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + 'A' + vdev->intx.pin); + + vdev->intx.pending = true; + qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 1); +} + +static void vfio_eoi(VFIODevice *vdev) +{ + if (!vdev->intx.pending) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) EOI\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + vdev->intx.pending = false; + qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0); + vfio_unmask_intx(vdev); +} + +struct vfio_irq_set_fd { + struct vfio_irq_set irq_set; + int32_t fd; +} QEMU_PACKED; + +static void vfio_enable_intx_kvm(VFIODevice *vdev) +{ +#ifdef CONFIG_KVM + /* + * VFIO supports an eventfd for INTx notification and an irqfd-like + * mechanism for unmasking INTx. If we could get a level irqfd in + * KVM and an eventfd triggered on EOI from guest, we could interlock + * these and avoid userspace for INTx. Work in progress. + */ +#endif +} + +static void vfio_disable_intx_kvm(VFIODevice *vdev) +{ +#ifdef CONFIG_KVM + /* Same. */ +#endif +} + +static void vfio_update_irq(PCIDevice *pdev) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + PCIINTxRoute route; + + if (vdev->interrupt != INT_INTx) { + return; + } + + route = pci_device_route_intx_to_irq(&vdev->pdev, vdev->intx.pin); + if (!memcmp(&route, &vdev->intx.route, sizeof(route))) { + return; /* Nothing changed */ + } + + DPRINTF("%s(%04x:%02x:%02x.%x) IRQ moved %d -> %d\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vdev->intx.route.irq, route.irq); + + vfio_disable_intx_kvm(vdev); + /* TBD - Disable QEMU eoi notifier */ + + vdev->intx.route = route; + + if (route.mode == PCI_INTX_DISABLED) { + return; + } + + /* TBD - Enable QEMU eoi notifier */ + vfio_enable_intx_kvm(vdev); + + /* Re-enable the interrupt in cased we missed an EOI */ + vfio_eoi(vdev); +} + +static int vfio_enable_intx(VFIODevice *vdev) +{ + struct vfio_irq_set_fd irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_INTX_IRQ_INDEX, + .start = 0, + .count = 1, + }, + }; + uint8_t pin = vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1); + + if (!pin) { + return 0; + } + + vfio_disable_interrupts(vdev); + + vdev->intx.pin = pin - 1; /* Pin A (1) -> irq[0] */ + vdev->intx.route = pci_device_route_intx_to_irq(&vdev->pdev, + vdev->intx.pin); + /* TBD - Enable QEMU eoi notifier */ + + if (event_notifier_init(&vdev->intx.interrupt, 0)) { + error_report("vfio: Error: event_notifier_init failed\n"); + return -1; + } + + irq_set_fd.fd = event_notifier_get_fd(&vdev->intx.interrupt); + qemu_set_fd_handler(irq_set_fd.fd, vfio_intx_interrupt, NULL, vdev); + + if (ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd)) { + error_report("vfio: Error: Failed to setup INTx fd: %s\n", + strerror(errno)); + return -1; + } + + vfio_enable_intx_kvm(vdev); + + vdev->interrupt = INT_INTx; + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + return 0; +} + +static void vfio_disable_intx(VFIODevice *vdev) +{ + int fd; + + vfio_disable_intx_kvm(vdev); + vfio_disable_irqindex(vdev, VFIO_PCI_INTX_IRQ_INDEX); + + /* TBD - Disable QEMU eoi notifier */ + + fd = event_notifier_get_fd(&vdev->intx.interrupt); + qemu_set_fd_handler(fd, NULL, NULL, vdev); + event_notifier_cleanup(&vdev->intx.interrupt); + + vdev->interrupt = INT_NONE; + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); +} + +/* + * MSI/X + */ +static void vfio_msi_interrupt(void *opaque) +{ + MSIVector *vec = opaque; + VFIODevice *vdev = vec->vdev; + + if (!event_notifier_test_and_clear(&vec->interrupt)) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vec->vector); + + if (vdev->interrupt == INT_MSIX) { + msix_notify(&vdev->pdev, vec->vector); + } else if (vdev->interrupt == INT_MSI) { + msi_notify(&vdev->pdev, vec->vector); + } else { + error_report("vfio: MSI interrupt receieved, but not enabled?\n"); + } +} + +static int vfio_enable_vectors(VFIODevice *vdev, bool msix) +{ + struct vfio_irq_set *irq_set; + int ret = 0, i, argsz; + int32_t *fds; + + argsz = sizeof(*irq_set) + (vdev->nr_vectors * sizeof(*fds)); + + irq_set = g_malloc0(argsz); + irq_set->argsz = argsz; + irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER; + irq_set->index = msix ? VFIO_PCI_MSIX_IRQ_INDEX : VFIO_PCI_MSI_IRQ_INDEX; + irq_set->start = 0; + irq_set->count = vdev->nr_vectors; + fds = (int32_t *)&irq_set->data; + + for (i = 0; i < vdev->nr_vectors; i++) { + if (!vdev->msi_vectors[i].use) { + fds[i] = -1; + continue; + } + + fds[i] = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); + } + + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, irq_set); + + g_free(irq_set); + + if (!ret) { + vdev->interrupt = msix ? INT_MSIX : INT_MSI; + } + + return ret; +} + +static int vfio_msix_vector_use(PCIDevice *pdev, + unsigned int vector, MSIMessage msg) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + int ret, fd; + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d used\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vector); + + if (vdev->interrupt != INT_MSIX) { + vfio_disable_interrupts(vdev); + } + + if (!vdev->msi_vectors) { + vdev->msi_vectors = g_malloc0(vdev->msix->entries * sizeof(MSIVector)); + } + + vdev->msi_vectors[vector].vdev = vdev; + vdev->msi_vectors[vector].vector = vector; + vdev->msi_vectors[vector].use = true; + + msix_vector_use(pdev, vector); + + if (event_notifier_init(&vdev->msi_vectors[vector].interrupt, 0)) { + error_report("vfio: Error: event_notifier_init failed\n"); + } + + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); + + /* + * Attempt to enable route through KVM irqchip, + * default to userspace handling if unavailable. + */ + vdev->msi_vectors[vector].virq = kvm_irqchip_add_msi_route(kvm_state, msg); + if (vdev->msi_vectors[vector].virq < 0 || + kvm_irqchip_add_irqfd(kvm_state, fd, + vdev->msi_vectors[vector].virq) < 0) { + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, + &vdev->msi_vectors[vector]); + } + + /* + * We don't want to have the host allocate all possible MSI vectors + * for a device if they're not in use, so we shutdown and incrementally + * increase them as needed. + */ + if (vdev->nr_vectors < vector + 1) { + int i; + + vfio_disable_irqindex(vdev, VFIO_PCI_MSIX_IRQ_INDEX); + vdev->nr_vectors = vector + 1; + ret = vfio_enable_vectors(vdev, true); + if (ret) { + error_report("vfio: failed to enable vectors, %d\n", ret); + } + + /* We don't know if we've missed interrupts in the interim... */ + for (i = 0; i < vdev->msix->entries; i++) { + if (vdev->msi_vectors[i].use) { + msix_notify(&vdev->pdev, i); + } + } + } else { + struct vfio_irq_set_fd irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | + VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_MSIX_IRQ_INDEX, + .start = vector, + .count = 1, + }, + .fd = fd, + }; + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); + if (ret) { + error_report("vfio: failed to modify vector, %d\n", ret); + } + msix_notify(&vdev->pdev, vector); + } + + return 0; +} + +static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int vector) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + struct vfio_irq_set_fd irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | + VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_MSIX_IRQ_INDEX, + .start = vector, + .count = 1, + }, + .fd = -1, + }; + int fd; + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d released\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vector); + + /* + * XXX What's the right thing to do here? This turns off the interrupt + * completely, but do we really just want to switch the interrupt to + * bouncing through userspace and let msix.c drop it? Not sure. + */ + msix_vector_unuse(pdev, vector); + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); + + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); + + if (vdev->msi_vectors[vector].virq < 0) { + qemu_set_fd_handler(fd, NULL, NULL, NULL); + } else { + kvm_irqchip_remove_irqfd(kvm_state, fd, vdev->msi_vectors[vector].virq); + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[vector].virq); + vdev->msi_vectors[vector].virq = -1; + } + + event_notifier_cleanup(&vdev->msi_vectors[vector].interrupt); + vdev->msi_vectors[vector].use = false; +} + +/* XXX This should move to msi.c */ +static MSIMessage msi_get_msg(PCIDevice *pdev, unsigned int vector) +{ + uint16_t flags = pci_get_word(pdev->config + pdev->msi_cap + PCI_MSI_FLAGS); + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT; + MSIMessage msg; + + if (msi64bit) { + msg.address = pci_get_quad(pdev->config + + pdev->msi_cap + PCI_MSI_ADDRESS_LO); + } else { + msg.address = pci_get_long(pdev->config + + pdev->msi_cap + PCI_MSI_ADDRESS_LO); + } + + msg.data = pci_get_word(pdev->config + pdev->msi_cap + + (msi64bit ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32)); + msg.data += vector; + + return msg; +} + +/* So should this */ +static void msi_set_qsize(PCIDevice *pdev, uint8_t size) +{ + uint8_t *config = pdev->config + pdev->msi_cap; + uint16_t flags; + + flags = pci_get_word(config + PCI_MSI_FLAGS); + flags = le16_to_cpu(flags); + flags &= ~PCI_MSI_FLAGS_QSIZE; + flags |= (size & 0x7) << 4; + flags = cpu_to_le16(flags); + pci_set_word(config + PCI_MSI_FLAGS, flags); +} + +static void vfio_enable_msi(VFIODevice *vdev) +{ + int ret, i; + + vfio_disable_interrupts(vdev); + + vdev->nr_vectors = msi_nr_vectors_allocated(&vdev->pdev); +retry: + vdev->msi_vectors = g_malloc0(vdev->nr_vectors * sizeof(MSIVector)); + + for (i = 0; i < vdev->nr_vectors; i++) { + MSIMessage msg; + int fd; + + vdev->msi_vectors[i].vdev = vdev; + vdev->msi_vectors[i].vector = i; + vdev->msi_vectors[i].use = true; + + if (event_notifier_init(&vdev->msi_vectors[i].interrupt, 0)) { + error_report("vfio: Error: event_notifier_init failed\n"); + } + + fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); + + msg = msi_get_msg(&vdev->pdev, i); + + /* + * Attempt to enable route through KVM irqchip, + * default to userspace handling if unavailable. + */ + vdev->msi_vectors[i].virq = kvm_irqchip_add_msi_route(kvm_state, msg); + if (vdev->msi_vectors[i].virq < 0 || + kvm_irqchip_add_irqfd(kvm_state, fd, + vdev->msi_vectors[i].virq) < 0) { + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, + &vdev->msi_vectors[i]); + } + } + + ret = vfio_enable_vectors(vdev, false); + if (ret) { + if (ret < 0) { + error_report("vfio: Error: Failed to setup MSI fds: %s\n", + strerror(errno)); + } else if (ret != vdev->nr_vectors) { + error_report("vfio: Error: Failed to enable %d " + "MSI vectors, retry with %d\n", vdev->nr_vectors, ret); + } + + for (i = 0; i < vdev->nr_vectors; i++) { + int fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); + if (vdev->msi_vectors[i].virq >= 0) { + kvm_irqchip_remove_irqfd(kvm_state, fd, + vdev->msi_vectors[i].virq); + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[i].virq); + vdev->msi_vectors[i].virq = -1; + } else { + qemu_set_fd_handler(fd, NULL, NULL, NULL); + } + event_notifier_cleanup(&vdev->msi_vectors[i].interrupt); + } + + g_free(vdev->msi_vectors); + + if (ret > 0 && ret != vdev->nr_vectors) { + vdev->nr_vectors = ret; + goto retry; + } + vdev->nr_vectors = 0; + + return; + } + + msi_set_qsize(&vdev->pdev, vdev->nr_vectors); + + DPRINTF("%s(%04x:%02x:%02x.%x) Enabled %d MSI vectors\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vdev->nr_vectors); +} + +static void vfio_disable_msi_x(VFIODevice *vdev, bool msix) +{ + int i; + + vfio_disable_irqindex(vdev, msix ? VFIO_PCI_MSIX_IRQ_INDEX : + VFIO_PCI_MSI_IRQ_INDEX); + + for (i = 0; i < vdev->nr_vectors; i++) { + int fd; + + if (!vdev->msi_vectors[i].use) { + continue; + } + + fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); + + if (vdev->msi_vectors[i].virq >= 0) { + kvm_irqchip_remove_irqfd(kvm_state, fd, vdev->msi_vectors[i].virq); + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[i].virq); + vdev->msi_vectors[i].virq = -1; + } else { + qemu_set_fd_handler(fd, NULL, NULL, NULL); + } + + if (msix) { + msix_vector_unuse(&vdev->pdev, i); + } + + event_notifier_cleanup(&vdev->msi_vectors[i].interrupt); + } + + g_free(vdev->msi_vectors); + vdev->msi_vectors = NULL; + vdev->nr_vectors = 0; + + if (!msix) { + msi_set_qsize(&vdev->pdev, 0); /* Actually still means 1 vector */ + } + + DPRINTF("%s(%04x:%02x:%02x.%x, msi%s)\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, msix ? "x" : ""); + + vfio_enable_intx(vdev); +} + +/* + * IO Port/MMIO - Beware of the endians, VFIO is always little endian + */ +static void vfio_bar_write(void *opaque, target_phys_addr_t addr, + uint64_t data, unsigned size) +{ + VFIOBAR *bar = opaque; + uint8_t buf[8]; + + switch (size) { + case 1: + *buf = data & 0xff; + break; + case 2: + *(uint16_t *)buf = cpu_to_le16(data); + break; + case 4: + *(uint32_t *)buf = cpu_to_le32(data); + break; + default: + hw_error("vfio: unsupported write size, %d bytes\n", size); + break; + } + + if (pwrite(bar->fd, buf, size, bar->fd_offset + addr) != size) { + error_report("%s(,0x%"PRIx64", 0x%"PRIx64", %d) failed: %s\n", + __func__, addr, data, size, strerror(errno)); + } + + DPRINTF("%s(BAR%d+0x%"PRIx64", 0x%"PRIx64", %d)\n", + __func__, bar->nr, addr, data, size); +} + +static uint64_t vfio_bar_read(void *opaque, + target_phys_addr_t addr, unsigned size) +{ + VFIOBAR *bar = opaque; + uint8_t buf[8]; + uint64_t data = 0; + + if (pread(bar->fd, buf, size, bar->fd_offset + addr) != size) { + error_report("%s(,0x%"PRIx64", %d) failed: %s\n", + __func__, addr, size, strerror(errno)); + return (uint64_t)-1; + } + + switch (size) { + case 1: + data = buf[0]; + break; + case 2: + data = le16_to_cpu(*(uint16_t *)buf); + break; + case 4: + data = le32_to_cpu(*(uint32_t *)buf); + break; + default: + hw_error("vfio: unsupported read size, %d bytes\n", size); + break; + } + + DPRINTF("%s(BAR%d+0x%"PRIx64", %d) = 0x%"PRIx64"\n", + __func__, bar->nr, addr, size, data); + + return data; +} + +static const MemoryRegionOps vfio_bar_ops = { + .read = vfio_bar_read, + .write = vfio_bar_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +/* + * PCI config space + */ +static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + uint32_t val = 0; + + /* + * We only need QEMU PCI config support for the ROM BAR, the MSI and MSIX + * capabilities, and the multifunction bit below. We let VFIO handle + * virtualizing everything else. Performance is not a concern here. + */ + if (ranges_overlap(addr, len, PCI_ROM_ADDRESS, 4) || + (pdev->cap_present & QEMU_PCI_CAP_MSIX && + ranges_overlap(addr, len, pdev->msix_cap, MSIX_CAP_LENGTH)) || + (pdev->cap_present & QEMU_PCI_CAP_MSI && + ranges_overlap(addr, len, pdev->msi_cap, vdev->msi_cap_size))) { + + val = pci_default_read_config(pdev, addr, len); + } else { + if (pread(vdev->fd, &val, len, vdev->config_offset + addr) != len) { + error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x) failed: %s\n", + __func__, vdev->host.domain, vdev->host.bus, + vdev->host.slot, vdev->host.function, addr, len, + strerror(errno)); + return -1; + } + val = le32_to_cpu(val); + } + + /* Multifunction bit is virualized in QEMU */ + if (unlikely(ranges_overlap(addr, len, PCI_HEADER_TYPE, 1))) { + uint32_t mask = PCI_HEADER_TYPE_MULTI_FUNCTION; + + if (len == 4) { + mask <<= 16; + } + + if (pdev->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) { + val |= mask; + } else { + val &= ~mask; + } + } + + DPRINTF("%s(%04x:%02x:%02x.%x, @0x%x, len=0x%x) %x\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, addr, len, val); + + return val; +} + +static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr, + uint32_t val, int len) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + uint32_t val_le = cpu_to_le32(val); + + DPRINTF("%s(%04x:%02x:%02x.%x, @0x%x, 0x%x, len=0x%x)\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, addr, val, len); + + /* Write everything to VFIO, let it filter out what we can't write */ + if (pwrite(vdev->fd, &val_le, len, vdev->config_offset + addr) != len) { + error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x, 0x%x) failed: %s\n", + __func__, vdev->host.domain, vdev->host.bus, + vdev->host.slot, vdev->host.function, addr, val, len, + strerror(errno)); + } + + /* Write standard header bits to emulation */ + if (addr < PCI_CONFIG_HEADER_SIZE) { + pci_default_write_config(pdev, addr, val, len); + return; + } + + /* MSI/MSI-X Enabling/Disabling */ + if (pdev->cap_present & QEMU_PCI_CAP_MSI && + ranges_overlap(addr, len, pdev->msi_cap, vdev->msi_cap_size)) { + int is_enabled, was_enabled = msi_enabled(pdev); + + pci_default_write_config(pdev, addr, val, len); + + is_enabled = msi_enabled(pdev); + + if (!was_enabled && is_enabled) { + vfio_enable_msi(vdev); + } else if (was_enabled && !is_enabled) { + vfio_disable_msi_x(vdev, false); + } + } + + if (pdev->cap_present & QEMU_PCI_CAP_MSIX && + ranges_overlap(addr, len, pdev->msix_cap, MSIX_CAP_LENGTH)) { + int is_enabled, was_enabled = msix_enabled(pdev); + + pci_default_write_config(pdev, addr, val, len); + + is_enabled = msix_enabled(pdev); + + if (!was_enabled && is_enabled) { + /* vfio_msix_vector_use handles this automatically */ + } else if (was_enabled && !is_enabled) { + vfio_disable_msi_x(vdev, true); + } + } +} + +/* + * DMA - Mapping and unmapping for the "type1" IOMMU interface used on x86 + */ +static int vfio_dma_map(VFIOContainer *container, target_phys_addr_t iova, + ram_addr_t size, void *vaddr, bool readonly) +{ + struct vfio_iommu_type1_dma_map map = { + .argsz = sizeof(map), + .flags = VFIO_DMA_MAP_FLAG_READ, + .vaddr = (__u64)vaddr, + .iova = iova, + .size = size, + }; + + if (!readonly) { + map.flags |= VFIO_DMA_MAP_FLAG_WRITE; + } + + if (ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map)) { + DPRINTF("VFIO_MAP_DMA: %d\n", -errno); + return -errno; + } + + return 0; +} + +static int vfio_dma_unmap(VFIOContainer *container, + target_phys_addr_t iova, ram_addr_t size) +{ + struct vfio_iommu_type1_dma_unmap unmap = { + .argsz = sizeof(unmap), + .flags = 0, + .iova = iova, + .size = size, + }; + + if (ioctl(container->fd, VFIO_IOMMU_UNMAP_DMA, &unmap)) { + DPRINTF("VFIO_UNMAP_DMA: %d\n", -errno); + return -errno; + } + + return 0; +} + +static void vfio_listener_dummy1(MemoryListener *listener) +{ + /* We don't do batching (begin/commit) or care about logging */ +} + +static void vfio_listener_dummy2(MemoryListener *listener, + MemoryRegionSection *section) +{ + /* We don't do logging or care about nops */ +} + +static void vfio_listener_dummy3(MemoryListener *listener, + MemoryRegionSection *section, + bool match_data, uint64_t data, + EventNotifier *e) +{ + /* We don't care about eventfds */ +} + +static bool vfio_listener_skipped_section(MemoryRegionSection *section) +{ + return !memory_region_is_ram(section->mr); +} + +static void vfio_listener_region_add(MemoryListener *listener, + MemoryRegionSection *section) +{ + VFIOContainer *container = container_of(listener, VFIOContainer, + iommu_data.listener); + target_phys_addr_t iova, end; + void *vaddr; + int ret; + + if (vfio_listener_skipped_section(section)) { + DPRINTF("vfio: SKIPPING region_add %016lx - %016lx\n", + section->offset_within_address_space, + section->offset_within_address_space + section->size - 1); + return; + } + + if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != + (section->offset_within_region & ~TARGET_PAGE_MASK))) { + error_report("%s received unaligned region\n", __func__); + return; + } + + iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); + end = (section->offset_within_address_space + section->size) & + TARGET_PAGE_MASK; + + if (iova >= end) { + return; + } + + vaddr = memory_region_get_ram_ptr(section->mr) + + section->offset_within_region + + (iova - section->offset_within_address_space); + + DPRINTF("vfio: region_add %016lx - %016lx [%p]\n", + iova, end - 1, vaddr); + + ret = vfio_dma_map(container, iova, end - iova, vaddr, section->readonly); + if (ret) { + error_report("vfio_dma_map(%p, 0x%016lx, 0x%lx, %p) = %d (%s)\n", + container, iova, end - iova, vaddr, ret, strerror(errno)); + } +} + +static void vfio_listener_region_del(MemoryListener *listener, + MemoryRegionSection *section) +{ + VFIOContainer *container = container_of(listener, VFIOContainer, + iommu_data.listener); + target_phys_addr_t iova, end; + int ret; + + if (vfio_listener_skipped_section(section)) { + DPRINTF("vfio: SKIPPING region_del %016lx - %016lx\n", + section->offset_within_address_space, + section->offset_within_address_space + section->size - 1); + return; + } + + if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != + (section->offset_within_region & ~TARGET_PAGE_MASK))) { + error_report("%s received unaligned region\n", __func__); + return; + } + + iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); + end = (section->offset_within_address_space + section->size) & + TARGET_PAGE_MASK; + + if (iova >= end) { + return; + } + + DPRINTF("vfio: region_del %016lx - %016lx\n", iova, end - 1); + + ret = vfio_dma_unmap(container, iova, end - iova); + if (ret) { + error_report("vfio_dma_unmap(%p, 0x%016lx, 0x%lx) = %d (%s)\n", + container, iova, end - iova, ret, strerror(errno)); + } +} + +static void vfio_listener_release(VFIOContainer *container) +{ + memory_listener_unregister(&container->iommu_data.listener); +} + +/* + * Interrupt setup + */ +static void vfio_disable_interrupts(VFIODevice *vdev) +{ + switch (vdev->interrupt) { + case INT_INTx: + vfio_disable_intx(vdev); + break; + case INT_MSI: + vfio_disable_msi_x(vdev, false); + break; + case INT_MSIX: + vfio_disable_msi_x(vdev, true); + break; + } +} + +static int vfio_setup_msi(VFIODevice *vdev, int pos) +{ + uint16_t ctrl; + bool msi_64bit, msi_maskbit; + int ret, entries; + + if (!msi_supported) { + return 0; + } + + if (pread(vdev->fd, &ctrl, sizeof(ctrl), + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { + return -1; + } + ctrl = le16_to_cpu(ctrl); + + msi_64bit = !!(ctrl & PCI_MSI_FLAGS_64BIT); + msi_maskbit = !!(ctrl & PCI_MSI_FLAGS_MASKBIT); + entries = 1 << ((ctrl & PCI_MSI_FLAGS_QMASK) >> 1); + + DPRINTF("%04x:%02x:%02x.%x PCI MSI CAP @0x%x\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, pos); + + ret = msi_init(&vdev->pdev, pos, entries, msi_64bit, msi_maskbit); + if (ret < 0) { + error_report("vfio: msi_init failed\n"); + return ret; + } + vdev->msi_cap_size = 0xa + (msi_maskbit ? 0xa : 0) + (msi_64bit ? 0x4 : 0); + + return 0; +} + +/* + * We don't have any control over how pci_add_capability() inserts + * capabilities into the chain. In order to setup MSI-X we need a + * MemoryRegion for the BAR. In order to setup the BAR and not + * attempt to mmap the MSI-X table area, which VFIO won't allow, we + * need to first look for where the MSI-X table lives. So we + * unfortunately split MSI-X setup across two functions. + */ +static int vfio_early_setup_msix(VFIODevice *vdev) +{ + uint8_t pos; + uint16_t ctrl; + uint32_t table, pba; + + pos = pci_find_capability(&vdev->pdev, PCI_CAP_ID_MSIX); + if (!pos) { + return 0; + } + + if (pread(vdev->fd, &ctrl, sizeof(ctrl), + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { + return -1; + } + + if (pread(vdev->fd, &table, sizeof(table), + vdev->config_offset + pos + PCI_MSIX_TABLE) != sizeof(table)) { + return -1; + } + + if (pread(vdev->fd, &pba, sizeof(pba), + vdev->config_offset + pos + PCI_MSIX_PBA) != sizeof(pba)) { + return -1; + } + + ctrl = le16_to_cpu(ctrl); + table = le32_to_cpu(table); + pba = le32_to_cpu(pba); + + vdev->msix = g_malloc0(sizeof(*(vdev->msix))); + vdev->msix->table_bar = table & PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->table_offset = table & ~PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->pba_bar = pba & PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->pba_offset = pba & ~PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->entries = (ctrl & PCI_MSIX_FLAGS_QSIZE) + 1; + + DPRINTF("%04x:%02x:%02x.%x " + "PCI MSI-X CAP @0x%x, BAR %d, offset 0x%x, entries %d\n", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, pos, vdev->msix->table_bar, + vdev->msix->table_offset, vdev->msix->entries); + + return 0; +} + +static int vfio_setup_msix(VFIODevice *vdev, int pos) +{ + int ret; + + if (!msi_supported) { + return 0; + } + + ret = msix_init(&vdev->pdev, vdev->msix->entries, + &vdev->bars[vdev->msix->table_bar].mem, + vdev->msix->table_bar, vdev->msix->table_offset, + &vdev->bars[vdev->msix->pba_bar].mem, + vdev->msix->pba_bar, vdev->msix->pba_offset, pos); + if (ret < 0) { + error_report("vfio: msix_init failed\n"); + return ret; + } + + ret = msix_set_vector_notifiers(&vdev->pdev, vfio_msix_vector_use, + vfio_msix_vector_release); + if (ret) { + error_report("vfio: msix_set_vector_notifiers failed %d\n", ret); + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, + &vdev->bars[vdev->msix->pba_bar].mem); + return ret; + } + + return 0; +} + +static void vfio_teardown_msi(VFIODevice *vdev) +{ + msi_uninit(&vdev->pdev); + + if (vdev->msix) { + /* FIXME: Why can't unset just silently do nothing?? */ + if (vdev->pdev.msix_vector_use_notifier && + vdev->pdev.msix_vector_release_notifier) { + msix_unset_vector_notifiers(&vdev->pdev); + } + + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, + &vdev->bars[vdev->msix->pba_bar].mem); + } +} + +/* + * Resource setup + */ +static void vfio_unmap_bar(VFIODevice *vdev, int nr) +{ + VFIOBAR *bar = &vdev->bars[nr]; + + if (!bar->size) { + return; + } + + memory_region_del_subregion(&bar->mem, &bar->mmap_mem); + munmap(bar->mmap, memory_region_size(&bar->mmap_mem)); + + if (vdev->msix && vdev->msix->table_bar == nr) { + memory_region_del_subregion(&bar->mem, &vdev->msix->mmap_mem); + munmap(vdev->msix->mmap, memory_region_size(&vdev->msix->mmap_mem)); + } + + memory_region_destroy(&bar->mem); +} + +static int vfio_mmap_bar(VFIOBAR *bar, MemoryRegion *mem, MemoryRegion *submem, + void **map, size_t size, off_t offset, + const char *name) +{ + int ret = 0; + + if (size && bar->flags & VFIO_REGION_INFO_FLAG_MMAP) { + int prot = 0; + + if (bar->flags & VFIO_REGION_INFO_FLAG_READ) { + prot |= PROT_READ; + } + + if (bar->flags & VFIO_REGION_INFO_FLAG_WRITE) { + prot |= PROT_WRITE; + } + + *map = mmap(NULL, size, prot, MAP_SHARED, + bar->fd, bar->fd_offset + offset); + if (*map == MAP_FAILED) { + *map = NULL; + ret = -errno; + goto empty_region; + } + + memory_region_init_ram_ptr(submem, name, size, *map); + } else { +empty_region: + /* Create a zero sized sub-region to make cleanup easy. */ + memory_region_init(submem, name, 0); + } + + memory_region_add_subregion(mem, offset, submem); + + return ret; +} + +static void vfio_map_bar(VFIODevice *vdev, int nr) +{ + VFIOBAR *bar = &vdev->bars[nr]; + unsigned size = bar->size; + char name[64]; + uint32_t pci_bar; + uint8_t type; + int ret; + + /* Skip both unimplemented BARs and the upper half of 64bit BARS. */ + if (!size) { + return; + } + + snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, nr); + + /* Determine what type of BAR this is for registration */ + ret = pread(vdev->fd, &pci_bar, sizeof(pci_bar), + vdev->config_offset + PCI_BASE_ADDRESS_0 + (4 * nr)); + if (ret != sizeof(pci_bar)) { + error_report("vfio: Failed to read BAR %d (%s)\n", nr, strerror(errno)); + return; + } + + pci_bar = le32_to_cpu(pci_bar); + type = pci_bar & (pci_bar & PCI_BASE_ADDRESS_SPACE_IO ? + ~PCI_BASE_ADDRESS_IO_MASK : ~PCI_BASE_ADDRESS_MEM_MASK); + + /* A "slow" read/write mapping underlies all BARs */ + memory_region_init_io(&bar->mem, &vfio_bar_ops, bar, name, size); + pci_register_bar(&vdev->pdev, nr, type, &bar->mem); + + /* + * We can't mmap areas overlapping the MSIX vector table, so we + * potentially insert a direct-mapped subregion before and after it. + */ + if (vdev->msix && vdev->msix->table_bar == nr) { + size = vdev->msix->table_offset & TARGET_PAGE_MASK; + } + + strncat(name, " mmap", sizeof(name) - strlen(name) - 1); + if (vfio_mmap_bar(bar, &bar->mem, + &bar->mmap_mem, &bar->mmap, size, 0, name)) { + error_report("%s unsupported. Performance may be slow\n", name); + } + + if (vdev->msix && vdev->msix->table_bar == nr) { + unsigned start; + + start = TARGET_PAGE_ALIGN(vdev->msix->table_offset + + (vdev->msix->entries * PCI_MSIX_ENTRY_SIZE)); + + size = start < bar->size ? bar->size - start : 0; + strncat(name, " msix-hi", sizeof(name) - strlen(name) - 1); + /* MSIXInfo contains another MemoryRegion for this mapping */ + if (vfio_mmap_bar(bar, &bar->mem, &vdev->msix->mmap_mem, + &vdev->msix->mmap, size, start, name)) { + error_report("%s unsupported. Performance may be slow\n", name); + } + } + + return; +} + +static void vfio_map_bars(VFIODevice *vdev) +{ + int i; + + for (i = 0; i < PCI_ROM_SLOT; i++) { + vfio_map_bar(vdev, i); + } +} + +static void vfio_unmap_bars(VFIODevice *vdev) +{ + int i; + + for (i = 0; i < PCI_ROM_SLOT; i++) { + vfio_unmap_bar(vdev, i); + } +} + +/* + * General setup + */ +static uint8_t vfio_std_cap_max_size(PCIDevice *pdev, uint8_t pos) +{ + uint8_t tmp, next = 0xff; + + for (tmp = pdev->config[PCI_CAPABILITY_LIST]; tmp; + tmp = pdev->config[tmp + 1]) { + if (tmp > pos && tmp < next) { + next = tmp; + } + } + + return next - pos; +} + +static int vfio_add_std_cap(VFIODevice *vdev, uint8_t pos) +{ + PCIDevice *pdev = &vdev->pdev; + uint8_t cap_id, next, size; + int ret; + + cap_id = pdev->config[pos]; + next = pdev->config[pos + 1]; + + /* + * If it becomes important to configure capabilities to their actual + * size, use this as the default when it's something we don't recognize. + * Since QEMU doesn't actually handle many of the config accesses, + * exact size doesn't seem worthwhile. + */ + size = vfio_std_cap_max_size(pdev, pos); + + /* + * pci_add_capability always inserts the new capability at the head + * of the chain. Therefore to end up with a chain that matches the + * physical device, we insert from the end by making this recursive. + * This is also why we pre-caclulate size above as cached config space + * will be changed as we unwind the stack. + */ + if (next) { + ret = vfio_add_std_cap(vdev, next); + if (ret) { + return ret; + } + } else { + pdev->config[PCI_CAPABILITY_LIST] = 0; /* Begin the rebuild */ + } + + switch (cap_id) { + case PCI_CAP_ID_MSI: + ret = vfio_setup_msi(vdev, pos); + break; + case PCI_CAP_ID_MSIX: + ret = vfio_setup_msix(vdev, pos); + break; + default: + ret = pci_add_capability(pdev, cap_id, pos, size); + break; + } + + if (ret < 0) { + error_report("vfio: %04x:%02x:%02x.%x Error adding PCI capability " + "0x%x[0x%x]@0x%x: %d\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + cap_id, size, pos, ret); + return ret; + } + + return 0; +} + +static int vfio_add_capabilities(VFIODevice *vdev) +{ + PCIDevice *pdev = &vdev->pdev; + + if (!(pdev->config[PCI_STATUS] & PCI_STATUS_CAP_LIST) || + !pdev->config[PCI_CAPABILITY_LIST]) { + return 0; /* Nothing to add */ + } + + return vfio_add_std_cap(vdev, pdev->config[PCI_CAPABILITY_LIST]); +} + +static int vfio_load_rom(VFIODevice *vdev) +{ + uint64_t size = vdev->rom_size; + const VMStateDescription *vmsd; + char name[32]; + off_t off = 0, voff = vdev->rom_offset; + ssize_t bytes; + void *ptr; + + /* If loading ROM from file, pci handles it */ + if (vdev->pdev.romfile || !vdev->pdev.rom_bar || !size) { + return 0; + } + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + vmsd = qdev_get_vmsd(DEVICE(&vdev->pdev)); + + if (vmsd) { + snprintf(name, sizeof(name), "%s.rom", vmsd->name); + } else { + snprintf(name, sizeof(name), "%s.rom", + object_get_typename(OBJECT(&vdev->pdev))); + } + memory_region_init_ram(&vdev->pdev.rom, name, size); + ptr = memory_region_get_ram_ptr(&vdev->pdev.rom); + memset(ptr, 0xff, size); + + while (size) { + bytes = pread(vdev->fd, ptr + off, size, voff + off); + if (bytes == 0) { + break; /* expect that we could get back less than the ROM BAR */ + } else if (bytes > 0) { + off += bytes; + size -= bytes; + } else { + if (errno == EINTR || errno == EAGAIN) { + continue; + } + error_report("vfio: Error reading device ROM: %s\n", + strerror(errno)); + memory_region_destroy(&vdev->pdev.rom); + return -1; + } + } + + pci_register_bar(&vdev->pdev, PCI_ROM_SLOT, 0, &vdev->pdev.rom); + vdev->pdev.has_rom = true; + return 0; +} + +static int vfio_connect_container(VFIOGroup *group) +{ + VFIOContainer *container; + int ret, fd; + + if (group->container) { + return 0; + } + + QLIST_FOREACH(container, &container_list, next) { + if (!ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &container->fd)) { + group->container = container; + QLIST_INSERT_HEAD(&container->group_list, group, container_next); + return 0; + } + } + + fd = qemu_open("/dev/vfio/vfio", O_RDWR); + if (fd < 0) { + error_report("vfio: failed to open /dev/vfio/vfio: %s\n", + strerror(errno)); + return -1; + } + + ret = ioctl(fd, VFIO_GET_API_VERSION); + if (ret != VFIO_API_VERSION) { + error_report("vfio: supported vfio version: %d, " + "reported version: %d\n", VFIO_API_VERSION, ret); + close(fd); + return -1; + } + + container = g_malloc0(sizeof(*container)); + container->fd = fd; + + if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) { + ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd); + if (ret) { + error_report("vfio: failed to set group container: %s\n", + strerror(errno)); + g_free(container); + close(fd); + return -1; + } + + ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_TYPE1_IOMMU); + if (ret) { + error_report("vfio: failed to set iommu for container: %s\n", + strerror(errno)); + g_free(container); + close(fd); + return -1; + } + + container->iommu_data.listener = (MemoryListener) { + .begin = vfio_listener_dummy1, + .commit = vfio_listener_dummy1, + .region_add = vfio_listener_region_add, + .region_del = vfio_listener_region_del, + .region_nop = vfio_listener_dummy2, + .log_start = vfio_listener_dummy2, + .log_stop = vfio_listener_dummy2, + .log_sync = vfio_listener_dummy2, + .log_global_start = vfio_listener_dummy1, + .log_global_stop = vfio_listener_dummy1, + .eventfd_add = vfio_listener_dummy3, + .eventfd_del = vfio_listener_dummy3, + }; + container->iommu_data.release = vfio_listener_release; + + memory_listener_register(&container->iommu_data.listener, + get_system_memory()); + } else { + error_report("vfio: No available IOMMU models\n"); + g_free(container); + close(fd); + return -1; + } + + QLIST_INIT(&container->group_list); + QLIST_INSERT_HEAD(&container_list, container, next); + + group->container = container; + QLIST_INSERT_HEAD(&container->group_list, group, container_next); + + return 0; +} + +static void vfio_disconnect_container(VFIOGroup *group) +{ + VFIOContainer *container = group->container; + + if (ioctl(group->fd, VFIO_GROUP_UNSET_CONTAINER, &container->fd)) { + error_report("vfio: error disconnecting group %d from container\n", + group->groupid); + } + + QLIST_REMOVE(group, container_next); + group->container = NULL; + + if (QLIST_EMPTY(&container->group_list)) { + if (container->iommu_data.release) { + container->iommu_data.release(container); + } + QLIST_REMOVE(container, next); + DPRINTF("vfio_disconnect_container: close container->fd\n"); + close(container->fd); + g_free(container); + } +} + +static VFIOGroup *vfio_get_group(int groupid) +{ + VFIOGroup *group; + char path[32]; + struct vfio_group_status status = { .argsz = sizeof(status) }; + + QLIST_FOREACH(group, &group_list, next) { + if (group->groupid == groupid) { + return group; + } + } + + group = g_malloc0(sizeof(*group)); + + snprintf(path, sizeof(path), "/dev/vfio/%d", groupid); + group->fd = qemu_open(path, O_RDWR); + if (group->fd < 0) { + error_report("vfio: error opening %s: %s", path, strerror(errno)); + g_free(group); + return NULL; + } + + if (ioctl(group->fd, VFIO_GROUP_GET_STATUS, &status)) { + error_report("vfio: error getting group status: %s\n", + strerror(errno)); + close(group->fd); + g_free(group); + return NULL; + } + + if (!(status.flags & VFIO_GROUP_FLAGS_VIABLE)) { + error_report("vfio: error, group %d is not viable, please ensure " + "all devices within the iommu_group are bound to their " + "vfio bus driver.\n", groupid); + close(group->fd); + g_free(group); + return NULL; + } + + group->groupid = groupid; + QLIST_INIT(&group->device_list); + + if (vfio_connect_container(group)) { + error_report("vfio: failed to setup container for group %d\n", groupid); + close(group->fd); + g_free(group); + return NULL; + } + + QLIST_INSERT_HEAD(&group_list, group, next); + + return group; +} + +static void vfio_put_group(VFIOGroup *group) +{ + if (!QLIST_EMPTY(&group->device_list)) { + return; + } + + vfio_disconnect_container(group); + QLIST_REMOVE(group, next); + DPRINTF("vfio_put_group: close group->fd\n"); + close(group->fd); + g_free(group); +} + +static int vfio_get_device(VFIOGroup *group, const char *name, VFIODevice *vdev) +{ + struct vfio_device_info dev_info = { .argsz = sizeof(dev_info) }; + struct vfio_region_info reg_info = { .argsz = sizeof(reg_info) }; + int ret, i; + + ret = ioctl(group->fd, VFIO_GROUP_GET_DEVICE_FD, name); + if (ret < 0) { + error_report("vfio: error getting device %s from group %d: %s", + name, group->groupid, strerror(errno)); + error_report("Verify all devices in group %d " + "are bound to vfio-pci or pci-stub and not already in use", + group->groupid); + return ret; + } + + vdev->fd = ret; + vdev->group = group; + QLIST_INSERT_HEAD(&group->device_list, vdev, next); + + /* Sanity check device */ + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_INFO, &dev_info); + if (ret) { + error_report("vfio: error getting device info: %s", strerror(errno)); + goto error; + } + + DPRINTF("Device %s flags: %u, regions: %u, irgs: %u\n", name, + dev_info.flags, dev_info.num_regions, dev_info.num_irqs); + + if (!(dev_info.flags & VFIO_DEVICE_FLAGS_PCI)) { + error_report("vfio: Um, this isn't a PCI device"); + goto error; + } + + vdev->reset_works = !!(dev_info.flags & VFIO_DEVICE_FLAGS_RESET); + if (!vdev->reset_works) { + error_report("Warning, device %s does not support reset\n", name); + } + + if (dev_info.num_regions != VFIO_PCI_NUM_REGIONS) { + error_report("vfio: unexpected number of io regions %u", + dev_info.num_regions); + goto error; + } + + if (dev_info.num_irqs != VFIO_PCI_NUM_IRQS) { + error_report("vfio: unexpected number of irqs %u", dev_info.num_irqs); + goto error; + } + + for (i = VFIO_PCI_BAR0_REGION_INDEX; i < VFIO_PCI_ROM_REGION_INDEX; i++) { + reg_info.index = i; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting region %d info: %s", i, + strerror(errno)); + goto error; + } + + DPRINTF("Device %s region %d:\n", name, i); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->bars[i].flags = reg_info.flags; + vdev->bars[i].size = reg_info.size; + vdev->bars[i].fd_offset = reg_info.offset; + vdev->bars[i].fd = vdev->fd; + vdev->bars[i].nr = i; + } + + reg_info.index = VFIO_PCI_ROM_REGION_INDEX; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting ROM info: %s", strerror(errno)); + goto error; + } + + DPRINTF("Device %s ROM:\n", name); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->rom_size = reg_info.size; + vdev->rom_offset = reg_info.offset; + + reg_info.index = VFIO_PCI_CONFIG_REGION_INDEX; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting config info: %s", strerror(errno)); + goto error; + } + + DPRINTF("Device %s config:\n", name); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->config_size = reg_info.size; + vdev->config_offset = reg_info.offset; + +error: + if (ret) { + QLIST_REMOVE(vdev, next); + vdev->group = NULL; + close(vdev->fd); + } + return ret; +} + +static void vfio_put_device(VFIODevice *vdev) +{ + QLIST_REMOVE(vdev, next); + vdev->group = NULL; + DPRINTF("vfio_put_device: close vdev->fd\n"); + close(vdev->fd); + if (vdev->msix) { + g_free(vdev->msix); + vdev->msix = NULL; + } +} + +static int vfio_initfn(struct PCIDevice *pdev) +{ + VFIODevice *pvdev, *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOGroup *group; + char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name; + ssize_t len; + struct stat st; + int groupid; + int ret; + + /* Check that the host device exists */ + snprintf(path, sizeof(path), + "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + if (stat(path, &st) < 0) { + error_report("vfio: error: no such host device: %s", path); + return -1; + } + + strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1); + + len = readlink(path, iommu_group_path, PATH_MAX); + if (len <= 0) { + error_report("vfio: error no iommu_group for device\n"); + return -1; + } + + iommu_group_path[len] = 0; + group_name = basename(iommu_group_path); + + if (sscanf(group_name, "%d", &groupid) != 1) { + error_report("vfio: error reading %s: %s", path, strerror(errno)); + return -1; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) group %d\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, groupid); + + group = vfio_get_group(groupid); + if (!group) { + error_report("vfio: failed to get group %d", groupid); + return -1; + } + + snprintf(path, sizeof(path), "%04x:%02x:%02x.%01x", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + + QLIST_FOREACH(pvdev, &group->device_list, next) { + if (pvdev->host.domain == vdev->host.domain && + pvdev->host.bus == vdev->host.bus && + pvdev->host.slot == vdev->host.slot && + pvdev->host.function == vdev->host.function) { + + error_report("vfio: error: device %s is already attached\n", path); + vfio_put_group(group); + return -1; + } + } + + ret = vfio_get_device(group, path, vdev); + if (ret) { + error_report("vfio: failed to get device %s", path); + vfio_put_group(group); + return -1; + } + + /* Get a copy of config space */ + assert(pci_config_size(&vdev->pdev) <= vdev->config_size); + ret = pread(vdev->fd, vdev->pdev.config, + pci_config_size(&vdev->pdev), vdev->config_offset); + if (ret < (int)pci_config_size(&vdev->pdev)) { + error_report("vfio: Failed to read device config space\n"); + goto out_put; + } + + /* + * Clear host resource mapping info. If we choose not to register a + * BAR, such as might be the case with the option ROM, we can get + * confusing, unwritable, residual addresses from the host here. + */ + memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24); + memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4); + + vfio_load_rom(vdev); + + if (vfio_early_setup_msix(vdev)) { + goto out_put; + } + + vfio_map_bars(vdev); + + if (vfio_add_capabilities(vdev)) { + goto out_teardown; + } + + if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) { + pci_device_set_intx_routing_notifier(&vdev->pdev, vfio_update_irq); + } + + if (vfio_enable_intx(vdev)) { + goto out_teardown; + } + + return 0; + +out_teardown: + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); + vfio_teardown_msi(vdev); + vfio_unmap_bars(vdev); +out_put: + vfio_put_device(vdev); + vfio_put_group(group); + return -1; +} + +static void vfio_exitfn(struct PCIDevice *pdev) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOGroup *group = vdev->group; + + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); + vfio_disable_interrupts(vdev); + vfio_teardown_msi(vdev); + vfio_unmap_bars(vdev); + vfio_put_device(vdev); + vfio_put_group(group); +} + +static void vfio_reset(DeviceState *dev) +{ + PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, dev); + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + + if (!vdev->reset_works) { + return; + } + + if (ioctl(vdev->fd, VFIO_DEVICE_RESET)) { + error_report("vfio: Error unable to reset physical device " + "(%04x:%02x:%02x.%x): %s\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + strerror(errno)); + } +} + +static Property vfio_pci_dev_properties[] = { + DEFINE_PROP_PCI_HOST_DEVADDR("host", VFIODevice, host), + /* + * TODO - support passed fds... is this necessary? + * DEFINE_PROP_STRING("vfiofd", VFIODevice, vfiofd_name), + * DEFINE_PROP_STRING("vfiogroupfd, VFIODevice, vfiogroupfd_name), + */ + DEFINE_PROP_END_OF_LIST(), +}; + + +static void vfio_pci_dev_class_init(ObjectClass *klass, void *data) +{ + PCIDeviceClass *dc = PCI_DEVICE_CLASS(klass); + + dc->parent_class.reset = vfio_reset; + dc->init = vfio_initfn; + dc->exit = vfio_exitfn; + dc->config_read = vfio_pci_read_config; + dc->config_write = vfio_pci_write_config; + dc->parent_class.props = vfio_pci_dev_properties; +} + +static TypeInfo vfio_pci_dev_info = { + .name = "vfio-pci", + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(VFIODevice), + .class_init = vfio_pci_dev_class_init, +}; + +static void register_vfio_pci_dev_type(void) +{ + type_register_static(&vfio_pci_dev_info); +} + +type_init(register_vfio_pci_dev_type) diff --git a/hw/vfio_pci.h b/hw/vfio_pci.h new file mode 100644 index 0000000..0a71bce --- /dev/null +++ b/hw/vfio_pci.h @@ -0,0 +1,101 @@ +#ifndef HW_VFIO_PCI_H +#define HW_VFIO_PCI_H + +#include "qemu-common.h" +#include "qemu-queue.h" +#include "pci.h" +#include "event_notifier.h" + +typedef struct VFIOBAR { + off_t fd_offset; /* offset of BAR within device fd */ + int fd; /* device fd, allows us to pass VFIOBAR as opaque data */ + MemoryRegion mem; /* slow, read/write access */ + MemoryRegion mmap_mem; /* direct mapped access */ + void *mmap; + size_t size; + uint32_t flags; /* VFIO region flags (rd/wr/mmap) */ + uint8_t nr; /* cache the BAR number for debug */ +} VFIOBAR; + +typedef struct INTx { + bool pending; /* interrupt pending */ + bool kvm_accel; /* set when QEMU bypass through KVM enabled */ + uint8_t pin; /* which pin to pull for qemu_set_irq */ + EventNotifier interrupt; /* eventfd triggered on interrupt */ + EventNotifier unmask; /* eventfd for unmask on QEMU bypass */ + PCIINTxRoute route; /* routing info for QEMU bypass */ +} INTx; + +struct VFIODevice; + +typedef struct MSIVector { + EventNotifier interrupt; /* eventfd triggered on interrupt */ + struct VFIODevice *vdev; /* back pointer to device */ + int vector; /* the vector number for this element */ + int virq; /* KVM irqchip route for QEMU bypass */ + bool use; +} MSIVector; + +enum { + INT_NONE = 0, + INT_INTx = 1, + INT_MSI = 2, + INT_MSIX = 3, +}; + +struct VFIOGroup; + +typedef struct VFIOContainer { + int fd; /* /dev/vfio/vfio, empowered by the attached groups */ + struct { + /* enable abstraction to support various iommu backends */ + union { + MemoryListener listener; /* Used by type1 iommu */ + }; + void (*release)(struct VFIOContainer *); + } iommu_data; + QLIST_HEAD(, VFIOGroup) group_list; + QLIST_ENTRY(VFIOContainer) next; +} VFIOContainer; + +/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */ +typedef struct MSIXInfo { + uint8_t table_bar; + uint8_t pba_bar; + uint16_t entries; + uint32_t table_offset; + uint32_t pba_offset; + MemoryRegion mmap_mem; + void *mmap; +} MSIXInfo; + +typedef struct VFIODevice { + PCIDevice pdev; + int fd; + INTx intx; + unsigned int config_size; + off_t config_offset; /* Offset of config space region within device fd */ + unsigned int rom_size; + off_t rom_offset; /* Offset of ROM region within device fd */ + int msi_cap_size; + MSIVector *msi_vectors; + MSIXInfo *msix; + int nr_vectors; /* Number of MSI/MSIX vectors currently in use */ + int interrupt; /* Current interrupt type */ + VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */ + PCIHostDeviceAddress host; + QLIST_ENTRY(VFIODevice) next; + struct VFIOGroup *group; + bool reset_works; +} VFIODevice; + +typedef struct VFIOGroup { + int fd; + int groupid; + VFIOContainer *container; + QLIST_HEAD(, VFIODevice) device_list; + QLIST_ENTRY(VFIOGroup) next; + QLIST_ENTRY(VFIOGroup) container_next; +} VFIOGroup; + +#endif /* HW_VFIO_PCI_H */ ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v2 3/4] vfio: vfio-pci device assignment driver @ 2012-08-02 19:17 ` Alex Williamson 0 siblings, 0 replies; 16+ messages in thread From: Alex Williamson @ 2012-08-02 19:17 UTC (permalink / raw) To: aliguori; +Cc: aik, jan.kiszka, qemu-devel, kvm This adds the core of the QEMU VFIO-based PCI device assignment driver. To make use of this driver, enable CONFIG_VFIO, CONFIG_VFIO_IOMMU_TYPE1, and CONFIG_VFIO_PCI in your host Linux kernel config. Load the vfio-pci module. To assign device 0000:05:00.0 to a guest, do the following: for dev in $(ls /sys/bus/pci/devices/0000:05:00.0/iommu_group/devices); do vendor=$(cat /sys/bus/pci/devices/$dev/vendor) device=$(cat /sys/bus/pci/devices/$dev/device) if [ -e /sys/bus/pci/devices/$dev/driver ]; then echo $dev > /sys/bus/pci/devices/$dev/driver/unbind fi echo $vendor $device > /sys/bus/pci/drivers/vfio-pci/new_id done See Documentation/vfio.txt in the Linux kernel tree for further description of IOMMU groups and VFIO. Then launch qemu including the option: -device vfio-pci,host=0000:05:00.0 Support for legacy PCI interrupts (INTx) is not yet included and will be added in a future update. Both MSI and MSI-X are supported here. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> --- hw/vfio_pci.c | 1853 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ hw/vfio_pci.h | 101 +++ 2 files changed, 1954 insertions(+) create mode 100644 hw/vfio_pci.c create mode 100644 hw/vfio_pci.h diff --git a/hw/vfio_pci.c b/hw/vfio_pci.c new file mode 100644 index 0000000..71bb1bd --- /dev/null +++ b/hw/vfio_pci.c @@ -0,0 +1,1853 @@ +/* + * vfio based device assignment support + * + * Copyright Red Hat, Inc. 2012 + * + * Authors: + * Alex Williamson <alex.williamson@redhat.com> + * + * This work is licensed under the terms of the GNU GPL, version 2. See + * the COPYING file in the top-level directory. + * + * Based on qemu-kvm device-assignment: + * Adapted for KVM by Qumranet. + * Copyright (c) 2007, Neocleus, Alex Novik (alex@neocleus.com) + * Copyright (c) 2007, Neocleus, Guy Zana (guy@neocleus.com) + * Copyright (C) 2008, Qumranet, Amit Shah (amit.shah@qumranet.com) + * Copyright (C) 2008, Red Hat, Amit Shah (amit.shah@redhat.com) + * Copyright (C) 2008, IBM, Muli Ben-Yehuda (muli@il.ibm.com) + */ + +#include <dirent.h> +#include <unistd.h> +#include <sys/ioctl.h> +#include <sys/mman.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <linux/vfio.h> + +#include "config.h" +#include "event_notifier.h" +#include "exec-memory.h" +#include "kvm.h" +#include "memory.h" +#include "msi.h" +#include "msix.h" +#include "qemu-error.h" +#include "range.h" +#include "vfio_pci.h" + +/* #define DEBUG_VFIO */ +#ifdef DEBUG_VFIO +#define DPRINTF(fmt, ...) \ + do { fprintf(stderr, "vfio: " fmt, ## __VA_ARGS__); } while (0) +#else +#define DPRINTF(fmt, ...) \ + do { } while (0) +#endif + +#define MSIX_CAP_LENGTH 12 + +static QLIST_HEAD(, VFIOContainer) + container_list = QLIST_HEAD_INITIALIZER(container_list); + +static QLIST_HEAD(, VFIOGroup) + group_list = QLIST_HEAD_INITIALIZER(group_list); + +static void vfio_disable_interrupts(VFIODevice *vdev); +static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len); + +/* + * Common VFIO interrupt disable + */ +static void vfio_disable_irqindex(VFIODevice *vdev, int index) +{ + struct vfio_irq_set irq_set = { + .argsz = sizeof(irq_set), + .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_TRIGGER, + .index = index, + .start = 0, + .count = 0, + }; + + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); + + vdev->interrupt = INT_NONE; +} + +/* + * INTx + */ +static void vfio_unmask_intx(VFIODevice *vdev) +{ + struct vfio_irq_set irq_set = { + .argsz = sizeof(irq_set), + .flags = VFIO_IRQ_SET_DATA_NONE | VFIO_IRQ_SET_ACTION_UNMASK, + .index = VFIO_PCI_INTX_IRQ_INDEX, + .start = 0, + .count = 1, + }; + + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set); +} + +static void vfio_intx_interrupt(void *opaque) +{ + VFIODevice *vdev = opaque; + + if (!event_notifier_test_and_clear(&vdev->intx.interrupt)) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) Pin %c\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + 'A' + vdev->intx.pin); + + vdev->intx.pending = true; + qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 1); +} + +static void vfio_eoi(VFIODevice *vdev) +{ + if (!vdev->intx.pending) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) EOI\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + vdev->intx.pending = false; + qemu_set_irq(vdev->pdev.irq[vdev->intx.pin], 0); + vfio_unmask_intx(vdev); +} + +struct vfio_irq_set_fd { + struct vfio_irq_set irq_set; + int32_t fd; +} QEMU_PACKED; + +static void vfio_enable_intx_kvm(VFIODevice *vdev) +{ +#ifdef CONFIG_KVM + /* + * VFIO supports an eventfd for INTx notification and an irqfd-like + * mechanism for unmasking INTx. If we could get a level irqfd in + * KVM and an eventfd triggered on EOI from guest, we could interlock + * these and avoid userspace for INTx. Work in progress. + */ +#endif +} + +static void vfio_disable_intx_kvm(VFIODevice *vdev) +{ +#ifdef CONFIG_KVM + /* Same. */ +#endif +} + +static void vfio_update_irq(PCIDevice *pdev) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + PCIINTxRoute route; + + if (vdev->interrupt != INT_INTx) { + return; + } + + route = pci_device_route_intx_to_irq(&vdev->pdev, vdev->intx.pin); + if (!memcmp(&route, &vdev->intx.route, sizeof(route))) { + return; /* Nothing changed */ + } + + DPRINTF("%s(%04x:%02x:%02x.%x) IRQ moved %d -> %d\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vdev->intx.route.irq, route.irq); + + vfio_disable_intx_kvm(vdev); + /* TBD - Disable QEMU eoi notifier */ + + vdev->intx.route = route; + + if (route.mode == PCI_INTX_DISABLED) { + return; + } + + /* TBD - Enable QEMU eoi notifier */ + vfio_enable_intx_kvm(vdev); + + /* Re-enable the interrupt in cased we missed an EOI */ + vfio_eoi(vdev); +} + +static int vfio_enable_intx(VFIODevice *vdev) +{ + struct vfio_irq_set_fd irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_INTX_IRQ_INDEX, + .start = 0, + .count = 1, + }, + }; + uint8_t pin = vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1); + + if (!pin) { + return 0; + } + + vfio_disable_interrupts(vdev); + + vdev->intx.pin = pin - 1; /* Pin A (1) -> irq[0] */ + vdev->intx.route = pci_device_route_intx_to_irq(&vdev->pdev, + vdev->intx.pin); + /* TBD - Enable QEMU eoi notifier */ + + if (event_notifier_init(&vdev->intx.interrupt, 0)) { + error_report("vfio: Error: event_notifier_init failed\n"); + return -1; + } + + irq_set_fd.fd = event_notifier_get_fd(&vdev->intx.interrupt); + qemu_set_fd_handler(irq_set_fd.fd, vfio_intx_interrupt, NULL, vdev); + + if (ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd)) { + error_report("vfio: Error: Failed to setup INTx fd: %s\n", + strerror(errno)); + return -1; + } + + vfio_enable_intx_kvm(vdev); + + vdev->interrupt = INT_INTx; + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + return 0; +} + +static void vfio_disable_intx(VFIODevice *vdev) +{ + int fd; + + vfio_disable_intx_kvm(vdev); + vfio_disable_irqindex(vdev, VFIO_PCI_INTX_IRQ_INDEX); + + /* TBD - Disable QEMU eoi notifier */ + + fd = event_notifier_get_fd(&vdev->intx.interrupt); + qemu_set_fd_handler(fd, NULL, NULL, vdev); + event_notifier_cleanup(&vdev->intx.interrupt); + + vdev->interrupt = INT_NONE; + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); +} + +/* + * MSI/X + */ +static void vfio_msi_interrupt(void *opaque) +{ + MSIVector *vec = opaque; + VFIODevice *vdev = vec->vdev; + + if (!event_notifier_test_and_clear(&vec->interrupt)) { + return; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vec->vector); + + if (vdev->interrupt == INT_MSIX) { + msix_notify(&vdev->pdev, vec->vector); + } else if (vdev->interrupt == INT_MSI) { + msi_notify(&vdev->pdev, vec->vector); + } else { + error_report("vfio: MSI interrupt receieved, but not enabled?\n"); + } +} + +static int vfio_enable_vectors(VFIODevice *vdev, bool msix) +{ + struct vfio_irq_set *irq_set; + int ret = 0, i, argsz; + int32_t *fds; + + argsz = sizeof(*irq_set) + (vdev->nr_vectors * sizeof(*fds)); + + irq_set = g_malloc0(argsz); + irq_set->argsz = argsz; + irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER; + irq_set->index = msix ? VFIO_PCI_MSIX_IRQ_INDEX : VFIO_PCI_MSI_IRQ_INDEX; + irq_set->start = 0; + irq_set->count = vdev->nr_vectors; + fds = (int32_t *)&irq_set->data; + + for (i = 0; i < vdev->nr_vectors; i++) { + if (!vdev->msi_vectors[i].use) { + fds[i] = -1; + continue; + } + + fds[i] = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); + } + + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, irq_set); + + g_free(irq_set); + + if (!ret) { + vdev->interrupt = msix ? INT_MSIX : INT_MSI; + } + + return ret; +} + +static int vfio_msix_vector_use(PCIDevice *pdev, + unsigned int vector, MSIMessage msg) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + int ret, fd; + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d used\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vector); + + if (vdev->interrupt != INT_MSIX) { + vfio_disable_interrupts(vdev); + } + + if (!vdev->msi_vectors) { + vdev->msi_vectors = g_malloc0(vdev->msix->entries * sizeof(MSIVector)); + } + + vdev->msi_vectors[vector].vdev = vdev; + vdev->msi_vectors[vector].vector = vector; + vdev->msi_vectors[vector].use = true; + + msix_vector_use(pdev, vector); + + if (event_notifier_init(&vdev->msi_vectors[vector].interrupt, 0)) { + error_report("vfio: Error: event_notifier_init failed\n"); + } + + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); + + /* + * Attempt to enable route through KVM irqchip, + * default to userspace handling if unavailable. + */ + vdev->msi_vectors[vector].virq = kvm_irqchip_add_msi_route(kvm_state, msg); + if (vdev->msi_vectors[vector].virq < 0 || + kvm_irqchip_add_irqfd(kvm_state, fd, + vdev->msi_vectors[vector].virq) < 0) { + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, + &vdev->msi_vectors[vector]); + } + + /* + * We don't want to have the host allocate all possible MSI vectors + * for a device if they're not in use, so we shutdown and incrementally + * increase them as needed. + */ + if (vdev->nr_vectors < vector + 1) { + int i; + + vfio_disable_irqindex(vdev, VFIO_PCI_MSIX_IRQ_INDEX); + vdev->nr_vectors = vector + 1; + ret = vfio_enable_vectors(vdev, true); + if (ret) { + error_report("vfio: failed to enable vectors, %d\n", ret); + } + + /* We don't know if we've missed interrupts in the interim... */ + for (i = 0; i < vdev->msix->entries; i++) { + if (vdev->msi_vectors[i].use) { + msix_notify(&vdev->pdev, i); + } + } + } else { + struct vfio_irq_set_fd irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | + VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_MSIX_IRQ_INDEX, + .start = vector, + .count = 1, + }, + .fd = fd, + }; + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); + if (ret) { + error_report("vfio: failed to modify vector, %d\n", ret); + } + msix_notify(&vdev->pdev, vector); + } + + return 0; +} + +static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int vector) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + struct vfio_irq_set_fd irq_set_fd = { + .irq_set = { + .argsz = sizeof(irq_set_fd), + .flags = VFIO_IRQ_SET_DATA_EVENTFD | + VFIO_IRQ_SET_ACTION_TRIGGER, + .index = VFIO_PCI_MSIX_IRQ_INDEX, + .start = vector, + .count = 1, + }, + .fd = -1, + }; + int fd; + + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d released\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vector); + + /* + * XXX What's the right thing to do here? This turns off the interrupt + * completely, but do we really just want to switch the interrupt to + * bouncing through userspace and let msix.c drop it? Not sure. + */ + msix_vector_unuse(pdev, vector); + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); + + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); + + if (vdev->msi_vectors[vector].virq < 0) { + qemu_set_fd_handler(fd, NULL, NULL, NULL); + } else { + kvm_irqchip_remove_irqfd(kvm_state, fd, vdev->msi_vectors[vector].virq); + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[vector].virq); + vdev->msi_vectors[vector].virq = -1; + } + + event_notifier_cleanup(&vdev->msi_vectors[vector].interrupt); + vdev->msi_vectors[vector].use = false; +} + +/* XXX This should move to msi.c */ +static MSIMessage msi_get_msg(PCIDevice *pdev, unsigned int vector) +{ + uint16_t flags = pci_get_word(pdev->config + pdev->msi_cap + PCI_MSI_FLAGS); + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT; + MSIMessage msg; + + if (msi64bit) { + msg.address = pci_get_quad(pdev->config + + pdev->msi_cap + PCI_MSI_ADDRESS_LO); + } else { + msg.address = pci_get_long(pdev->config + + pdev->msi_cap + PCI_MSI_ADDRESS_LO); + } + + msg.data = pci_get_word(pdev->config + pdev->msi_cap + + (msi64bit ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32)); + msg.data += vector; + + return msg; +} + +/* So should this */ +static void msi_set_qsize(PCIDevice *pdev, uint8_t size) +{ + uint8_t *config = pdev->config + pdev->msi_cap; + uint16_t flags; + + flags = pci_get_word(config + PCI_MSI_FLAGS); + flags = le16_to_cpu(flags); + flags &= ~PCI_MSI_FLAGS_QSIZE; + flags |= (size & 0x7) << 4; + flags = cpu_to_le16(flags); + pci_set_word(config + PCI_MSI_FLAGS, flags); +} + +static void vfio_enable_msi(VFIODevice *vdev) +{ + int ret, i; + + vfio_disable_interrupts(vdev); + + vdev->nr_vectors = msi_nr_vectors_allocated(&vdev->pdev); +retry: + vdev->msi_vectors = g_malloc0(vdev->nr_vectors * sizeof(MSIVector)); + + for (i = 0; i < vdev->nr_vectors; i++) { + MSIMessage msg; + int fd; + + vdev->msi_vectors[i].vdev = vdev; + vdev->msi_vectors[i].vector = i; + vdev->msi_vectors[i].use = true; + + if (event_notifier_init(&vdev->msi_vectors[i].interrupt, 0)) { + error_report("vfio: Error: event_notifier_init failed\n"); + } + + fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); + + msg = msi_get_msg(&vdev->pdev, i); + + /* + * Attempt to enable route through KVM irqchip, + * default to userspace handling if unavailable. + */ + vdev->msi_vectors[i].virq = kvm_irqchip_add_msi_route(kvm_state, msg); + if (vdev->msi_vectors[i].virq < 0 || + kvm_irqchip_add_irqfd(kvm_state, fd, + vdev->msi_vectors[i].virq) < 0) { + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, + &vdev->msi_vectors[i]); + } + } + + ret = vfio_enable_vectors(vdev, false); + if (ret) { + if (ret < 0) { + error_report("vfio: Error: Failed to setup MSI fds: %s\n", + strerror(errno)); + } else if (ret != vdev->nr_vectors) { + error_report("vfio: Error: Failed to enable %d " + "MSI vectors, retry with %d\n", vdev->nr_vectors, ret); + } + + for (i = 0; i < vdev->nr_vectors; i++) { + int fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); + if (vdev->msi_vectors[i].virq >= 0) { + kvm_irqchip_remove_irqfd(kvm_state, fd, + vdev->msi_vectors[i].virq); + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[i].virq); + vdev->msi_vectors[i].virq = -1; + } else { + qemu_set_fd_handler(fd, NULL, NULL, NULL); + } + event_notifier_cleanup(&vdev->msi_vectors[i].interrupt); + } + + g_free(vdev->msi_vectors); + + if (ret > 0 && ret != vdev->nr_vectors) { + vdev->nr_vectors = ret; + goto retry; + } + vdev->nr_vectors = 0; + + return; + } + + msi_set_qsize(&vdev->pdev, vdev->nr_vectors); + + DPRINTF("%s(%04x:%02x:%02x.%x) Enabled %d MSI vectors\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, vdev->nr_vectors); +} + +static void vfio_disable_msi_x(VFIODevice *vdev, bool msix) +{ + int i; + + vfio_disable_irqindex(vdev, msix ? VFIO_PCI_MSIX_IRQ_INDEX : + VFIO_PCI_MSI_IRQ_INDEX); + + for (i = 0; i < vdev->nr_vectors; i++) { + int fd; + + if (!vdev->msi_vectors[i].use) { + continue; + } + + fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); + + if (vdev->msi_vectors[i].virq >= 0) { + kvm_irqchip_remove_irqfd(kvm_state, fd, vdev->msi_vectors[i].virq); + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[i].virq); + vdev->msi_vectors[i].virq = -1; + } else { + qemu_set_fd_handler(fd, NULL, NULL, NULL); + } + + if (msix) { + msix_vector_unuse(&vdev->pdev, i); + } + + event_notifier_cleanup(&vdev->msi_vectors[i].interrupt); + } + + g_free(vdev->msi_vectors); + vdev->msi_vectors = NULL; + vdev->nr_vectors = 0; + + if (!msix) { + msi_set_qsize(&vdev->pdev, 0); /* Actually still means 1 vector */ + } + + DPRINTF("%s(%04x:%02x:%02x.%x, msi%s)\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, msix ? "x" : ""); + + vfio_enable_intx(vdev); +} + +/* + * IO Port/MMIO - Beware of the endians, VFIO is always little endian + */ +static void vfio_bar_write(void *opaque, target_phys_addr_t addr, + uint64_t data, unsigned size) +{ + VFIOBAR *bar = opaque; + uint8_t buf[8]; + + switch (size) { + case 1: + *buf = data & 0xff; + break; + case 2: + *(uint16_t *)buf = cpu_to_le16(data); + break; + case 4: + *(uint32_t *)buf = cpu_to_le32(data); + break; + default: + hw_error("vfio: unsupported write size, %d bytes\n", size); + break; + } + + if (pwrite(bar->fd, buf, size, bar->fd_offset + addr) != size) { + error_report("%s(,0x%"PRIx64", 0x%"PRIx64", %d) failed: %s\n", + __func__, addr, data, size, strerror(errno)); + } + + DPRINTF("%s(BAR%d+0x%"PRIx64", 0x%"PRIx64", %d)\n", + __func__, bar->nr, addr, data, size); +} + +static uint64_t vfio_bar_read(void *opaque, + target_phys_addr_t addr, unsigned size) +{ + VFIOBAR *bar = opaque; + uint8_t buf[8]; + uint64_t data = 0; + + if (pread(bar->fd, buf, size, bar->fd_offset + addr) != size) { + error_report("%s(,0x%"PRIx64", %d) failed: %s\n", + __func__, addr, size, strerror(errno)); + return (uint64_t)-1; + } + + switch (size) { + case 1: + data = buf[0]; + break; + case 2: + data = le16_to_cpu(*(uint16_t *)buf); + break; + case 4: + data = le32_to_cpu(*(uint32_t *)buf); + break; + default: + hw_error("vfio: unsupported read size, %d bytes\n", size); + break; + } + + DPRINTF("%s(BAR%d+0x%"PRIx64", %d) = 0x%"PRIx64"\n", + __func__, bar->nr, addr, size, data); + + return data; +} + +static const MemoryRegionOps vfio_bar_ops = { + .read = vfio_bar_read, + .write = vfio_bar_write, + .endianness = DEVICE_LITTLE_ENDIAN, +}; + +/* + * PCI config space + */ +static uint32_t vfio_pci_read_config(PCIDevice *pdev, uint32_t addr, int len) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + uint32_t val = 0; + + /* + * We only need QEMU PCI config support for the ROM BAR, the MSI and MSIX + * capabilities, and the multifunction bit below. We let VFIO handle + * virtualizing everything else. Performance is not a concern here. + */ + if (ranges_overlap(addr, len, PCI_ROM_ADDRESS, 4) || + (pdev->cap_present & QEMU_PCI_CAP_MSIX && + ranges_overlap(addr, len, pdev->msix_cap, MSIX_CAP_LENGTH)) || + (pdev->cap_present & QEMU_PCI_CAP_MSI && + ranges_overlap(addr, len, pdev->msi_cap, vdev->msi_cap_size))) { + + val = pci_default_read_config(pdev, addr, len); + } else { + if (pread(vdev->fd, &val, len, vdev->config_offset + addr) != len) { + error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x) failed: %s\n", + __func__, vdev->host.domain, vdev->host.bus, + vdev->host.slot, vdev->host.function, addr, len, + strerror(errno)); + return -1; + } + val = le32_to_cpu(val); + } + + /* Multifunction bit is virualized in QEMU */ + if (unlikely(ranges_overlap(addr, len, PCI_HEADER_TYPE, 1))) { + uint32_t mask = PCI_HEADER_TYPE_MULTI_FUNCTION; + + if (len == 4) { + mask <<= 16; + } + + if (pdev->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) { + val |= mask; + } else { + val &= ~mask; + } + } + + DPRINTF("%s(%04x:%02x:%02x.%x, @0x%x, len=0x%x) %x\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, addr, len, val); + + return val; +} + +static void vfio_pci_write_config(PCIDevice *pdev, uint32_t addr, + uint32_t val, int len) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + uint32_t val_le = cpu_to_le32(val); + + DPRINTF("%s(%04x:%02x:%02x.%x, @0x%x, 0x%x, len=0x%x)\n", __func__, + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, addr, val, len); + + /* Write everything to VFIO, let it filter out what we can't write */ + if (pwrite(vdev->fd, &val_le, len, vdev->config_offset + addr) != len) { + error_report("%s(%04x:%02x:%02x.%x, 0x%x, 0x%x, 0x%x) failed: %s\n", + __func__, vdev->host.domain, vdev->host.bus, + vdev->host.slot, vdev->host.function, addr, val, len, + strerror(errno)); + } + + /* Write standard header bits to emulation */ + if (addr < PCI_CONFIG_HEADER_SIZE) { + pci_default_write_config(pdev, addr, val, len); + return; + } + + /* MSI/MSI-X Enabling/Disabling */ + if (pdev->cap_present & QEMU_PCI_CAP_MSI && + ranges_overlap(addr, len, pdev->msi_cap, vdev->msi_cap_size)) { + int is_enabled, was_enabled = msi_enabled(pdev); + + pci_default_write_config(pdev, addr, val, len); + + is_enabled = msi_enabled(pdev); + + if (!was_enabled && is_enabled) { + vfio_enable_msi(vdev); + } else if (was_enabled && !is_enabled) { + vfio_disable_msi_x(vdev, false); + } + } + + if (pdev->cap_present & QEMU_PCI_CAP_MSIX && + ranges_overlap(addr, len, pdev->msix_cap, MSIX_CAP_LENGTH)) { + int is_enabled, was_enabled = msix_enabled(pdev); + + pci_default_write_config(pdev, addr, val, len); + + is_enabled = msix_enabled(pdev); + + if (!was_enabled && is_enabled) { + /* vfio_msix_vector_use handles this automatically */ + } else if (was_enabled && !is_enabled) { + vfio_disable_msi_x(vdev, true); + } + } +} + +/* + * DMA - Mapping and unmapping for the "type1" IOMMU interface used on x86 + */ +static int vfio_dma_map(VFIOContainer *container, target_phys_addr_t iova, + ram_addr_t size, void *vaddr, bool readonly) +{ + struct vfio_iommu_type1_dma_map map = { + .argsz = sizeof(map), + .flags = VFIO_DMA_MAP_FLAG_READ, + .vaddr = (__u64)vaddr, + .iova = iova, + .size = size, + }; + + if (!readonly) { + map.flags |= VFIO_DMA_MAP_FLAG_WRITE; + } + + if (ioctl(container->fd, VFIO_IOMMU_MAP_DMA, &map)) { + DPRINTF("VFIO_MAP_DMA: %d\n", -errno); + return -errno; + } + + return 0; +} + +static int vfio_dma_unmap(VFIOContainer *container, + target_phys_addr_t iova, ram_addr_t size) +{ + struct vfio_iommu_type1_dma_unmap unmap = { + .argsz = sizeof(unmap), + .flags = 0, + .iova = iova, + .size = size, + }; + + if (ioctl(container->fd, VFIO_IOMMU_UNMAP_DMA, &unmap)) { + DPRINTF("VFIO_UNMAP_DMA: %d\n", -errno); + return -errno; + } + + return 0; +} + +static void vfio_listener_dummy1(MemoryListener *listener) +{ + /* We don't do batching (begin/commit) or care about logging */ +} + +static void vfio_listener_dummy2(MemoryListener *listener, + MemoryRegionSection *section) +{ + /* We don't do logging or care about nops */ +} + +static void vfio_listener_dummy3(MemoryListener *listener, + MemoryRegionSection *section, + bool match_data, uint64_t data, + EventNotifier *e) +{ + /* We don't care about eventfds */ +} + +static bool vfio_listener_skipped_section(MemoryRegionSection *section) +{ + return !memory_region_is_ram(section->mr); +} + +static void vfio_listener_region_add(MemoryListener *listener, + MemoryRegionSection *section) +{ + VFIOContainer *container = container_of(listener, VFIOContainer, + iommu_data.listener); + target_phys_addr_t iova, end; + void *vaddr; + int ret; + + if (vfio_listener_skipped_section(section)) { + DPRINTF("vfio: SKIPPING region_add %016lx - %016lx\n", + section->offset_within_address_space, + section->offset_within_address_space + section->size - 1); + return; + } + + if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != + (section->offset_within_region & ~TARGET_PAGE_MASK))) { + error_report("%s received unaligned region\n", __func__); + return; + } + + iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); + end = (section->offset_within_address_space + section->size) & + TARGET_PAGE_MASK; + + if (iova >= end) { + return; + } + + vaddr = memory_region_get_ram_ptr(section->mr) + + section->offset_within_region + + (iova - section->offset_within_address_space); + + DPRINTF("vfio: region_add %016lx - %016lx [%p]\n", + iova, end - 1, vaddr); + + ret = vfio_dma_map(container, iova, end - iova, vaddr, section->readonly); + if (ret) { + error_report("vfio_dma_map(%p, 0x%016lx, 0x%lx, %p) = %d (%s)\n", + container, iova, end - iova, vaddr, ret, strerror(errno)); + } +} + +static void vfio_listener_region_del(MemoryListener *listener, + MemoryRegionSection *section) +{ + VFIOContainer *container = container_of(listener, VFIOContainer, + iommu_data.listener); + target_phys_addr_t iova, end; + int ret; + + if (vfio_listener_skipped_section(section)) { + DPRINTF("vfio: SKIPPING region_del %016lx - %016lx\n", + section->offset_within_address_space, + section->offset_within_address_space + section->size - 1); + return; + } + + if (unlikely((section->offset_within_address_space & ~TARGET_PAGE_MASK) != + (section->offset_within_region & ~TARGET_PAGE_MASK))) { + error_report("%s received unaligned region\n", __func__); + return; + } + + iova = TARGET_PAGE_ALIGN(section->offset_within_address_space); + end = (section->offset_within_address_space + section->size) & + TARGET_PAGE_MASK; + + if (iova >= end) { + return; + } + + DPRINTF("vfio: region_del %016lx - %016lx\n", iova, end - 1); + + ret = vfio_dma_unmap(container, iova, end - iova); + if (ret) { + error_report("vfio_dma_unmap(%p, 0x%016lx, 0x%lx) = %d (%s)\n", + container, iova, end - iova, ret, strerror(errno)); + } +} + +static void vfio_listener_release(VFIOContainer *container) +{ + memory_listener_unregister(&container->iommu_data.listener); +} + +/* + * Interrupt setup + */ +static void vfio_disable_interrupts(VFIODevice *vdev) +{ + switch (vdev->interrupt) { + case INT_INTx: + vfio_disable_intx(vdev); + break; + case INT_MSI: + vfio_disable_msi_x(vdev, false); + break; + case INT_MSIX: + vfio_disable_msi_x(vdev, true); + break; + } +} + +static int vfio_setup_msi(VFIODevice *vdev, int pos) +{ + uint16_t ctrl; + bool msi_64bit, msi_maskbit; + int ret, entries; + + if (!msi_supported) { + return 0; + } + + if (pread(vdev->fd, &ctrl, sizeof(ctrl), + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { + return -1; + } + ctrl = le16_to_cpu(ctrl); + + msi_64bit = !!(ctrl & PCI_MSI_FLAGS_64BIT); + msi_maskbit = !!(ctrl & PCI_MSI_FLAGS_MASKBIT); + entries = 1 << ((ctrl & PCI_MSI_FLAGS_QMASK) >> 1); + + DPRINTF("%04x:%02x:%02x.%x PCI MSI CAP @0x%x\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, pos); + + ret = msi_init(&vdev->pdev, pos, entries, msi_64bit, msi_maskbit); + if (ret < 0) { + error_report("vfio: msi_init failed\n"); + return ret; + } + vdev->msi_cap_size = 0xa + (msi_maskbit ? 0xa : 0) + (msi_64bit ? 0x4 : 0); + + return 0; +} + +/* + * We don't have any control over how pci_add_capability() inserts + * capabilities into the chain. In order to setup MSI-X we need a + * MemoryRegion for the BAR. In order to setup the BAR and not + * attempt to mmap the MSI-X table area, which VFIO won't allow, we + * need to first look for where the MSI-X table lives. So we + * unfortunately split MSI-X setup across two functions. + */ +static int vfio_early_setup_msix(VFIODevice *vdev) +{ + uint8_t pos; + uint16_t ctrl; + uint32_t table, pba; + + pos = pci_find_capability(&vdev->pdev, PCI_CAP_ID_MSIX); + if (!pos) { + return 0; + } + + if (pread(vdev->fd, &ctrl, sizeof(ctrl), + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { + return -1; + } + + if (pread(vdev->fd, &table, sizeof(table), + vdev->config_offset + pos + PCI_MSIX_TABLE) != sizeof(table)) { + return -1; + } + + if (pread(vdev->fd, &pba, sizeof(pba), + vdev->config_offset + pos + PCI_MSIX_PBA) != sizeof(pba)) { + return -1; + } + + ctrl = le16_to_cpu(ctrl); + table = le32_to_cpu(table); + pba = le32_to_cpu(pba); + + vdev->msix = g_malloc0(sizeof(*(vdev->msix))); + vdev->msix->table_bar = table & PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->table_offset = table & ~PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->pba_bar = pba & PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->pba_offset = pba & ~PCI_MSIX_FLAGS_BIRMASK; + vdev->msix->entries = (ctrl & PCI_MSIX_FLAGS_QSIZE) + 1; + + DPRINTF("%04x:%02x:%02x.%x " + "PCI MSI-X CAP @0x%x, BAR %d, offset 0x%x, entries %d\n", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, pos, vdev->msix->table_bar, + vdev->msix->table_offset, vdev->msix->entries); + + return 0; +} + +static int vfio_setup_msix(VFIODevice *vdev, int pos) +{ + int ret; + + if (!msi_supported) { + return 0; + } + + ret = msix_init(&vdev->pdev, vdev->msix->entries, + &vdev->bars[vdev->msix->table_bar].mem, + vdev->msix->table_bar, vdev->msix->table_offset, + &vdev->bars[vdev->msix->pba_bar].mem, + vdev->msix->pba_bar, vdev->msix->pba_offset, pos); + if (ret < 0) { + error_report("vfio: msix_init failed\n"); + return ret; + } + + ret = msix_set_vector_notifiers(&vdev->pdev, vfio_msix_vector_use, + vfio_msix_vector_release); + if (ret) { + error_report("vfio: msix_set_vector_notifiers failed %d\n", ret); + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, + &vdev->bars[vdev->msix->pba_bar].mem); + return ret; + } + + return 0; +} + +static void vfio_teardown_msi(VFIODevice *vdev) +{ + msi_uninit(&vdev->pdev); + + if (vdev->msix) { + /* FIXME: Why can't unset just silently do nothing?? */ + if (vdev->pdev.msix_vector_use_notifier && + vdev->pdev.msix_vector_release_notifier) { + msix_unset_vector_notifiers(&vdev->pdev); + } + + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, + &vdev->bars[vdev->msix->pba_bar].mem); + } +} + +/* + * Resource setup + */ +static void vfio_unmap_bar(VFIODevice *vdev, int nr) +{ + VFIOBAR *bar = &vdev->bars[nr]; + + if (!bar->size) { + return; + } + + memory_region_del_subregion(&bar->mem, &bar->mmap_mem); + munmap(bar->mmap, memory_region_size(&bar->mmap_mem)); + + if (vdev->msix && vdev->msix->table_bar == nr) { + memory_region_del_subregion(&bar->mem, &vdev->msix->mmap_mem); + munmap(vdev->msix->mmap, memory_region_size(&vdev->msix->mmap_mem)); + } + + memory_region_destroy(&bar->mem); +} + +static int vfio_mmap_bar(VFIOBAR *bar, MemoryRegion *mem, MemoryRegion *submem, + void **map, size_t size, off_t offset, + const char *name) +{ + int ret = 0; + + if (size && bar->flags & VFIO_REGION_INFO_FLAG_MMAP) { + int prot = 0; + + if (bar->flags & VFIO_REGION_INFO_FLAG_READ) { + prot |= PROT_READ; + } + + if (bar->flags & VFIO_REGION_INFO_FLAG_WRITE) { + prot |= PROT_WRITE; + } + + *map = mmap(NULL, size, prot, MAP_SHARED, + bar->fd, bar->fd_offset + offset); + if (*map == MAP_FAILED) { + *map = NULL; + ret = -errno; + goto empty_region; + } + + memory_region_init_ram_ptr(submem, name, size, *map); + } else { +empty_region: + /* Create a zero sized sub-region to make cleanup easy. */ + memory_region_init(submem, name, 0); + } + + memory_region_add_subregion(mem, offset, submem); + + return ret; +} + +static void vfio_map_bar(VFIODevice *vdev, int nr) +{ + VFIOBAR *bar = &vdev->bars[nr]; + unsigned size = bar->size; + char name[64]; + uint32_t pci_bar; + uint8_t type; + int ret; + + /* Skip both unimplemented BARs and the upper half of 64bit BARS. */ + if (!size) { + return; + } + + snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function, nr); + + /* Determine what type of BAR this is for registration */ + ret = pread(vdev->fd, &pci_bar, sizeof(pci_bar), + vdev->config_offset + PCI_BASE_ADDRESS_0 + (4 * nr)); + if (ret != sizeof(pci_bar)) { + error_report("vfio: Failed to read BAR %d (%s)\n", nr, strerror(errno)); + return; + } + + pci_bar = le32_to_cpu(pci_bar); + type = pci_bar & (pci_bar & PCI_BASE_ADDRESS_SPACE_IO ? + ~PCI_BASE_ADDRESS_IO_MASK : ~PCI_BASE_ADDRESS_MEM_MASK); + + /* A "slow" read/write mapping underlies all BARs */ + memory_region_init_io(&bar->mem, &vfio_bar_ops, bar, name, size); + pci_register_bar(&vdev->pdev, nr, type, &bar->mem); + + /* + * We can't mmap areas overlapping the MSIX vector table, so we + * potentially insert a direct-mapped subregion before and after it. + */ + if (vdev->msix && vdev->msix->table_bar == nr) { + size = vdev->msix->table_offset & TARGET_PAGE_MASK; + } + + strncat(name, " mmap", sizeof(name) - strlen(name) - 1); + if (vfio_mmap_bar(bar, &bar->mem, + &bar->mmap_mem, &bar->mmap, size, 0, name)) { + error_report("%s unsupported. Performance may be slow\n", name); + } + + if (vdev->msix && vdev->msix->table_bar == nr) { + unsigned start; + + start = TARGET_PAGE_ALIGN(vdev->msix->table_offset + + (vdev->msix->entries * PCI_MSIX_ENTRY_SIZE)); + + size = start < bar->size ? bar->size - start : 0; + strncat(name, " msix-hi", sizeof(name) - strlen(name) - 1); + /* MSIXInfo contains another MemoryRegion for this mapping */ + if (vfio_mmap_bar(bar, &bar->mem, &vdev->msix->mmap_mem, + &vdev->msix->mmap, size, start, name)) { + error_report("%s unsupported. Performance may be slow\n", name); + } + } + + return; +} + +static void vfio_map_bars(VFIODevice *vdev) +{ + int i; + + for (i = 0; i < PCI_ROM_SLOT; i++) { + vfio_map_bar(vdev, i); + } +} + +static void vfio_unmap_bars(VFIODevice *vdev) +{ + int i; + + for (i = 0; i < PCI_ROM_SLOT; i++) { + vfio_unmap_bar(vdev, i); + } +} + +/* + * General setup + */ +static uint8_t vfio_std_cap_max_size(PCIDevice *pdev, uint8_t pos) +{ + uint8_t tmp, next = 0xff; + + for (tmp = pdev->config[PCI_CAPABILITY_LIST]; tmp; + tmp = pdev->config[tmp + 1]) { + if (tmp > pos && tmp < next) { + next = tmp; + } + } + + return next - pos; +} + +static int vfio_add_std_cap(VFIODevice *vdev, uint8_t pos) +{ + PCIDevice *pdev = &vdev->pdev; + uint8_t cap_id, next, size; + int ret; + + cap_id = pdev->config[pos]; + next = pdev->config[pos + 1]; + + /* + * If it becomes important to configure capabilities to their actual + * size, use this as the default when it's something we don't recognize. + * Since QEMU doesn't actually handle many of the config accesses, + * exact size doesn't seem worthwhile. + */ + size = vfio_std_cap_max_size(pdev, pos); + + /* + * pci_add_capability always inserts the new capability at the head + * of the chain. Therefore to end up with a chain that matches the + * physical device, we insert from the end by making this recursive. + * This is also why we pre-caclulate size above as cached config space + * will be changed as we unwind the stack. + */ + if (next) { + ret = vfio_add_std_cap(vdev, next); + if (ret) { + return ret; + } + } else { + pdev->config[PCI_CAPABILITY_LIST] = 0; /* Begin the rebuild */ + } + + switch (cap_id) { + case PCI_CAP_ID_MSI: + ret = vfio_setup_msi(vdev, pos); + break; + case PCI_CAP_ID_MSIX: + ret = vfio_setup_msix(vdev, pos); + break; + default: + ret = pci_add_capability(pdev, cap_id, pos, size); + break; + } + + if (ret < 0) { + error_report("vfio: %04x:%02x:%02x.%x Error adding PCI capability " + "0x%x[0x%x]@0x%x: %d\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + cap_id, size, pos, ret); + return ret; + } + + return 0; +} + +static int vfio_add_capabilities(VFIODevice *vdev) +{ + PCIDevice *pdev = &vdev->pdev; + + if (!(pdev->config[PCI_STATUS] & PCI_STATUS_CAP_LIST) || + !pdev->config[PCI_CAPABILITY_LIST]) { + return 0; /* Nothing to add */ + } + + return vfio_add_std_cap(vdev, pdev->config[PCI_CAPABILITY_LIST]); +} + +static int vfio_load_rom(VFIODevice *vdev) +{ + uint64_t size = vdev->rom_size; + const VMStateDescription *vmsd; + char name[32]; + off_t off = 0, voff = vdev->rom_offset; + ssize_t bytes; + void *ptr; + + /* If loading ROM from file, pci handles it */ + if (vdev->pdev.romfile || !vdev->pdev.rom_bar || !size) { + return 0; + } + + DPRINTF("%s(%04x:%02x:%02x.%x)\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function); + + vmsd = qdev_get_vmsd(DEVICE(&vdev->pdev)); + + if (vmsd) { + snprintf(name, sizeof(name), "%s.rom", vmsd->name); + } else { + snprintf(name, sizeof(name), "%s.rom", + object_get_typename(OBJECT(&vdev->pdev))); + } + memory_region_init_ram(&vdev->pdev.rom, name, size); + ptr = memory_region_get_ram_ptr(&vdev->pdev.rom); + memset(ptr, 0xff, size); + + while (size) { + bytes = pread(vdev->fd, ptr + off, size, voff + off); + if (bytes == 0) { + break; /* expect that we could get back less than the ROM BAR */ + } else if (bytes > 0) { + off += bytes; + size -= bytes; + } else { + if (errno == EINTR || errno == EAGAIN) { + continue; + } + error_report("vfio: Error reading device ROM: %s\n", + strerror(errno)); + memory_region_destroy(&vdev->pdev.rom); + return -1; + } + } + + pci_register_bar(&vdev->pdev, PCI_ROM_SLOT, 0, &vdev->pdev.rom); + vdev->pdev.has_rom = true; + return 0; +} + +static int vfio_connect_container(VFIOGroup *group) +{ + VFIOContainer *container; + int ret, fd; + + if (group->container) { + return 0; + } + + QLIST_FOREACH(container, &container_list, next) { + if (!ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &container->fd)) { + group->container = container; + QLIST_INSERT_HEAD(&container->group_list, group, container_next); + return 0; + } + } + + fd = qemu_open("/dev/vfio/vfio", O_RDWR); + if (fd < 0) { + error_report("vfio: failed to open /dev/vfio/vfio: %s\n", + strerror(errno)); + return -1; + } + + ret = ioctl(fd, VFIO_GET_API_VERSION); + if (ret != VFIO_API_VERSION) { + error_report("vfio: supported vfio version: %d, " + "reported version: %d\n", VFIO_API_VERSION, ret); + close(fd); + return -1; + } + + container = g_malloc0(sizeof(*container)); + container->fd = fd; + + if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_TYPE1_IOMMU)) { + ret = ioctl(group->fd, VFIO_GROUP_SET_CONTAINER, &fd); + if (ret) { + error_report("vfio: failed to set group container: %s\n", + strerror(errno)); + g_free(container); + close(fd); + return -1; + } + + ret = ioctl(fd, VFIO_SET_IOMMU, VFIO_TYPE1_IOMMU); + if (ret) { + error_report("vfio: failed to set iommu for container: %s\n", + strerror(errno)); + g_free(container); + close(fd); + return -1; + } + + container->iommu_data.listener = (MemoryListener) { + .begin = vfio_listener_dummy1, + .commit = vfio_listener_dummy1, + .region_add = vfio_listener_region_add, + .region_del = vfio_listener_region_del, + .region_nop = vfio_listener_dummy2, + .log_start = vfio_listener_dummy2, + .log_stop = vfio_listener_dummy2, + .log_sync = vfio_listener_dummy2, + .log_global_start = vfio_listener_dummy1, + .log_global_stop = vfio_listener_dummy1, + .eventfd_add = vfio_listener_dummy3, + .eventfd_del = vfio_listener_dummy3, + }; + container->iommu_data.release = vfio_listener_release; + + memory_listener_register(&container->iommu_data.listener, + get_system_memory()); + } else { + error_report("vfio: No available IOMMU models\n"); + g_free(container); + close(fd); + return -1; + } + + QLIST_INIT(&container->group_list); + QLIST_INSERT_HEAD(&container_list, container, next); + + group->container = container; + QLIST_INSERT_HEAD(&container->group_list, group, container_next); + + return 0; +} + +static void vfio_disconnect_container(VFIOGroup *group) +{ + VFIOContainer *container = group->container; + + if (ioctl(group->fd, VFIO_GROUP_UNSET_CONTAINER, &container->fd)) { + error_report("vfio: error disconnecting group %d from container\n", + group->groupid); + } + + QLIST_REMOVE(group, container_next); + group->container = NULL; + + if (QLIST_EMPTY(&container->group_list)) { + if (container->iommu_data.release) { + container->iommu_data.release(container); + } + QLIST_REMOVE(container, next); + DPRINTF("vfio_disconnect_container: close container->fd\n"); + close(container->fd); + g_free(container); + } +} + +static VFIOGroup *vfio_get_group(int groupid) +{ + VFIOGroup *group; + char path[32]; + struct vfio_group_status status = { .argsz = sizeof(status) }; + + QLIST_FOREACH(group, &group_list, next) { + if (group->groupid == groupid) { + return group; + } + } + + group = g_malloc0(sizeof(*group)); + + snprintf(path, sizeof(path), "/dev/vfio/%d", groupid); + group->fd = qemu_open(path, O_RDWR); + if (group->fd < 0) { + error_report("vfio: error opening %s: %s", path, strerror(errno)); + g_free(group); + return NULL; + } + + if (ioctl(group->fd, VFIO_GROUP_GET_STATUS, &status)) { + error_report("vfio: error getting group status: %s\n", + strerror(errno)); + close(group->fd); + g_free(group); + return NULL; + } + + if (!(status.flags & VFIO_GROUP_FLAGS_VIABLE)) { + error_report("vfio: error, group %d is not viable, please ensure " + "all devices within the iommu_group are bound to their " + "vfio bus driver.\n", groupid); + close(group->fd); + g_free(group); + return NULL; + } + + group->groupid = groupid; + QLIST_INIT(&group->device_list); + + if (vfio_connect_container(group)) { + error_report("vfio: failed to setup container for group %d\n", groupid); + close(group->fd); + g_free(group); + return NULL; + } + + QLIST_INSERT_HEAD(&group_list, group, next); + + return group; +} + +static void vfio_put_group(VFIOGroup *group) +{ + if (!QLIST_EMPTY(&group->device_list)) { + return; + } + + vfio_disconnect_container(group); + QLIST_REMOVE(group, next); + DPRINTF("vfio_put_group: close group->fd\n"); + close(group->fd); + g_free(group); +} + +static int vfio_get_device(VFIOGroup *group, const char *name, VFIODevice *vdev) +{ + struct vfio_device_info dev_info = { .argsz = sizeof(dev_info) }; + struct vfio_region_info reg_info = { .argsz = sizeof(reg_info) }; + int ret, i; + + ret = ioctl(group->fd, VFIO_GROUP_GET_DEVICE_FD, name); + if (ret < 0) { + error_report("vfio: error getting device %s from group %d: %s", + name, group->groupid, strerror(errno)); + error_report("Verify all devices in group %d " + "are bound to vfio-pci or pci-stub and not already in use", + group->groupid); + return ret; + } + + vdev->fd = ret; + vdev->group = group; + QLIST_INSERT_HEAD(&group->device_list, vdev, next); + + /* Sanity check device */ + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_INFO, &dev_info); + if (ret) { + error_report("vfio: error getting device info: %s", strerror(errno)); + goto error; + } + + DPRINTF("Device %s flags: %u, regions: %u, irgs: %u\n", name, + dev_info.flags, dev_info.num_regions, dev_info.num_irqs); + + if (!(dev_info.flags & VFIO_DEVICE_FLAGS_PCI)) { + error_report("vfio: Um, this isn't a PCI device"); + goto error; + } + + vdev->reset_works = !!(dev_info.flags & VFIO_DEVICE_FLAGS_RESET); + if (!vdev->reset_works) { + error_report("Warning, device %s does not support reset\n", name); + } + + if (dev_info.num_regions != VFIO_PCI_NUM_REGIONS) { + error_report("vfio: unexpected number of io regions %u", + dev_info.num_regions); + goto error; + } + + if (dev_info.num_irqs != VFIO_PCI_NUM_IRQS) { + error_report("vfio: unexpected number of irqs %u", dev_info.num_irqs); + goto error; + } + + for (i = VFIO_PCI_BAR0_REGION_INDEX; i < VFIO_PCI_ROM_REGION_INDEX; i++) { + reg_info.index = i; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting region %d info: %s", i, + strerror(errno)); + goto error; + } + + DPRINTF("Device %s region %d:\n", name, i); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->bars[i].flags = reg_info.flags; + vdev->bars[i].size = reg_info.size; + vdev->bars[i].fd_offset = reg_info.offset; + vdev->bars[i].fd = vdev->fd; + vdev->bars[i].nr = i; + } + + reg_info.index = VFIO_PCI_ROM_REGION_INDEX; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting ROM info: %s", strerror(errno)); + goto error; + } + + DPRINTF("Device %s ROM:\n", name); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->rom_size = reg_info.size; + vdev->rom_offset = reg_info.offset; + + reg_info.index = VFIO_PCI_CONFIG_REGION_INDEX; + + ret = ioctl(vdev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info); + if (ret) { + error_report("vfio: Error getting config info: %s", strerror(errno)); + goto error; + } + + DPRINTF("Device %s config:\n", name); + DPRINTF(" size: 0x%lx, offset: 0x%lx, flags: 0x%lx\n", + (unsigned long)reg_info.size, (unsigned long)reg_info.offset, + (unsigned long)reg_info.flags); + + vdev->config_size = reg_info.size; + vdev->config_offset = reg_info.offset; + +error: + if (ret) { + QLIST_REMOVE(vdev, next); + vdev->group = NULL; + close(vdev->fd); + } + return ret; +} + +static void vfio_put_device(VFIODevice *vdev) +{ + QLIST_REMOVE(vdev, next); + vdev->group = NULL; + DPRINTF("vfio_put_device: close vdev->fd\n"); + close(vdev->fd); + if (vdev->msix) { + g_free(vdev->msix); + vdev->msix = NULL; + } +} + +static int vfio_initfn(struct PCIDevice *pdev) +{ + VFIODevice *pvdev, *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOGroup *group; + char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name; + ssize_t len; + struct stat st; + int groupid; + int ret; + + /* Check that the host device exists */ + snprintf(path, sizeof(path), + "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + if (stat(path, &st) < 0) { + error_report("vfio: error: no such host device: %s", path); + return -1; + } + + strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1); + + len = readlink(path, iommu_group_path, PATH_MAX); + if (len <= 0) { + error_report("vfio: error no iommu_group for device\n"); + return -1; + } + + iommu_group_path[len] = 0; + group_name = basename(iommu_group_path); + + if (sscanf(group_name, "%d", &groupid) != 1) { + error_report("vfio: error reading %s: %s", path, strerror(errno)); + return -1; + } + + DPRINTF("%s(%04x:%02x:%02x.%x) group %d\n", __func__, vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, groupid); + + group = vfio_get_group(groupid); + if (!group) { + error_report("vfio: failed to get group %d", groupid); + return -1; + } + + snprintf(path, sizeof(path), "%04x:%02x:%02x.%01x", + vdev->host.domain, vdev->host.bus, vdev->host.slot, + vdev->host.function); + + QLIST_FOREACH(pvdev, &group->device_list, next) { + if (pvdev->host.domain == vdev->host.domain && + pvdev->host.bus == vdev->host.bus && + pvdev->host.slot == vdev->host.slot && + pvdev->host.function == vdev->host.function) { + + error_report("vfio: error: device %s is already attached\n", path); + vfio_put_group(group); + return -1; + } + } + + ret = vfio_get_device(group, path, vdev); + if (ret) { + error_report("vfio: failed to get device %s", path); + vfio_put_group(group); + return -1; + } + + /* Get a copy of config space */ + assert(pci_config_size(&vdev->pdev) <= vdev->config_size); + ret = pread(vdev->fd, vdev->pdev.config, + pci_config_size(&vdev->pdev), vdev->config_offset); + if (ret < (int)pci_config_size(&vdev->pdev)) { + error_report("vfio: Failed to read device config space\n"); + goto out_put; + } + + /* + * Clear host resource mapping info. If we choose not to register a + * BAR, such as might be the case with the option ROM, we can get + * confusing, unwritable, residual addresses from the host here. + */ + memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24); + memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4); + + vfio_load_rom(vdev); + + if (vfio_early_setup_msix(vdev)) { + goto out_put; + } + + vfio_map_bars(vdev); + + if (vfio_add_capabilities(vdev)) { + goto out_teardown; + } + + if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) { + pci_device_set_intx_routing_notifier(&vdev->pdev, vfio_update_irq); + } + + if (vfio_enable_intx(vdev)) { + goto out_teardown; + } + + return 0; + +out_teardown: + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); + vfio_teardown_msi(vdev); + vfio_unmap_bars(vdev); +out_put: + vfio_put_device(vdev); + vfio_put_group(group); + return -1; +} + +static void vfio_exitfn(struct PCIDevice *pdev) +{ + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + VFIOGroup *group = vdev->group; + + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); + vfio_disable_interrupts(vdev); + vfio_teardown_msi(vdev); + vfio_unmap_bars(vdev); + vfio_put_device(vdev); + vfio_put_group(group); +} + +static void vfio_reset(DeviceState *dev) +{ + PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, dev); + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); + + if (!vdev->reset_works) { + return; + } + + if (ioctl(vdev->fd, VFIO_DEVICE_RESET)) { + error_report("vfio: Error unable to reset physical device " + "(%04x:%02x:%02x.%x): %s\n", vdev->host.domain, + vdev->host.bus, vdev->host.slot, vdev->host.function, + strerror(errno)); + } +} + +static Property vfio_pci_dev_properties[] = { + DEFINE_PROP_PCI_HOST_DEVADDR("host", VFIODevice, host), + /* + * TODO - support passed fds... is this necessary? + * DEFINE_PROP_STRING("vfiofd", VFIODevice, vfiofd_name), + * DEFINE_PROP_STRING("vfiogroupfd, VFIODevice, vfiogroupfd_name), + */ + DEFINE_PROP_END_OF_LIST(), +}; + + +static void vfio_pci_dev_class_init(ObjectClass *klass, void *data) +{ + PCIDeviceClass *dc = PCI_DEVICE_CLASS(klass); + + dc->parent_class.reset = vfio_reset; + dc->init = vfio_initfn; + dc->exit = vfio_exitfn; + dc->config_read = vfio_pci_read_config; + dc->config_write = vfio_pci_write_config; + dc->parent_class.props = vfio_pci_dev_properties; +} + +static TypeInfo vfio_pci_dev_info = { + .name = "vfio-pci", + .parent = TYPE_PCI_DEVICE, + .instance_size = sizeof(VFIODevice), + .class_init = vfio_pci_dev_class_init, +}; + +static void register_vfio_pci_dev_type(void) +{ + type_register_static(&vfio_pci_dev_info); +} + +type_init(register_vfio_pci_dev_type) diff --git a/hw/vfio_pci.h b/hw/vfio_pci.h new file mode 100644 index 0000000..0a71bce --- /dev/null +++ b/hw/vfio_pci.h @@ -0,0 +1,101 @@ +#ifndef HW_VFIO_PCI_H +#define HW_VFIO_PCI_H + +#include "qemu-common.h" +#include "qemu-queue.h" +#include "pci.h" +#include "event_notifier.h" + +typedef struct VFIOBAR { + off_t fd_offset; /* offset of BAR within device fd */ + int fd; /* device fd, allows us to pass VFIOBAR as opaque data */ + MemoryRegion mem; /* slow, read/write access */ + MemoryRegion mmap_mem; /* direct mapped access */ + void *mmap; + size_t size; + uint32_t flags; /* VFIO region flags (rd/wr/mmap) */ + uint8_t nr; /* cache the BAR number for debug */ +} VFIOBAR; + +typedef struct INTx { + bool pending; /* interrupt pending */ + bool kvm_accel; /* set when QEMU bypass through KVM enabled */ + uint8_t pin; /* which pin to pull for qemu_set_irq */ + EventNotifier interrupt; /* eventfd triggered on interrupt */ + EventNotifier unmask; /* eventfd for unmask on QEMU bypass */ + PCIINTxRoute route; /* routing info for QEMU bypass */ +} INTx; + +struct VFIODevice; + +typedef struct MSIVector { + EventNotifier interrupt; /* eventfd triggered on interrupt */ + struct VFIODevice *vdev; /* back pointer to device */ + int vector; /* the vector number for this element */ + int virq; /* KVM irqchip route for QEMU bypass */ + bool use; +} MSIVector; + +enum { + INT_NONE = 0, + INT_INTx = 1, + INT_MSI = 2, + INT_MSIX = 3, +}; + +struct VFIOGroup; + +typedef struct VFIOContainer { + int fd; /* /dev/vfio/vfio, empowered by the attached groups */ + struct { + /* enable abstraction to support various iommu backends */ + union { + MemoryListener listener; /* Used by type1 iommu */ + }; + void (*release)(struct VFIOContainer *); + } iommu_data; + QLIST_HEAD(, VFIOGroup) group_list; + QLIST_ENTRY(VFIOContainer) next; +} VFIOContainer; + +/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */ +typedef struct MSIXInfo { + uint8_t table_bar; + uint8_t pba_bar; + uint16_t entries; + uint32_t table_offset; + uint32_t pba_offset; + MemoryRegion mmap_mem; + void *mmap; +} MSIXInfo; + +typedef struct VFIODevice { + PCIDevice pdev; + int fd; + INTx intx; + unsigned int config_size; + off_t config_offset; /* Offset of config space region within device fd */ + unsigned int rom_size; + off_t rom_offset; /* Offset of ROM region within device fd */ + int msi_cap_size; + MSIVector *msi_vectors; + MSIXInfo *msix; + int nr_vectors; /* Number of MSI/MSIX vectors currently in use */ + int interrupt; /* Current interrupt type */ + VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */ + PCIHostDeviceAddress host; + QLIST_ENTRY(VFIODevice) next; + struct VFIOGroup *group; + bool reset_works; +} VFIODevice; + +typedef struct VFIOGroup { + int fd; + int groupid; + VFIOContainer *container; + QLIST_HEAD(, VFIODevice) device_list; + QLIST_ENTRY(VFIOGroup) next; + QLIST_ENTRY(VFIOGroup) container_next; +} VFIOGroup; + +#endif /* HW_VFIO_PCI_H */ ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: [PATCH v2 3/4] vfio: vfio-pci device assignment driver 2012-08-02 19:17 ` [Qemu-devel] " Alex Williamson @ 2012-08-14 17:40 ` Jan Kiszka -1 siblings, 0 replies; 16+ messages in thread From: Jan Kiszka @ 2012-08-14 17:40 UTC (permalink / raw) To: Alex Williamson Cc: aik@ozlabs.ru, aliguori@us.ibm.com, qemu-devel@nongnu.org, kvm@vger.kernel.org Just some comments, didn't look at all details. On 2012-08-02 21:17, Alex Williamson wrote: > + > +static int vfio_msix_vector_use(PCIDevice *pdev, > + unsigned int vector, MSIMessage msg) > +{ > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > + int ret, fd; > + > + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d used\n", __func__, > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function, vector); > + > + if (vdev->interrupt != INT_MSIX) { > + vfio_disable_interrupts(vdev); > + } > + > + if (!vdev->msi_vectors) { > + vdev->msi_vectors = g_malloc0(vdev->msix->entries * sizeof(MSIVector)); > + } > + > + vdev->msi_vectors[vector].vdev = vdev; > + vdev->msi_vectors[vector].vector = vector; > + vdev->msi_vectors[vector].use = true; > + > + msix_vector_use(pdev, vector); > + > + if (event_notifier_init(&vdev->msi_vectors[vector].interrupt, 0)) { > + error_report("vfio: Error: event_notifier_init failed\n"); > + } > + > + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); > + > + /* > + * Attempt to enable route through KVM irqchip, > + * default to userspace handling if unavailable. > + */ > + vdev->msi_vectors[vector].virq = kvm_irqchip_add_msi_route(kvm_state, msg); > + if (vdev->msi_vectors[vector].virq < 0 || > + kvm_irqchip_add_irqfd(kvm_state, fd, > + vdev->msi_vectors[vector].virq) < 0) { If kvm_irqchip_add_irqfd fails, you have to drop the route and set virq to -1. Otherwise, you won't match with the release logic below. > + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, > + &vdev->msi_vectors[vector]); > + } > + > + /* > + * We don't want to have the host allocate all possible MSI vectors > + * for a device if they're not in use, so we shutdown and incrementally > + * increase them as needed. > + */ > + if (vdev->nr_vectors < vector + 1) { > + int i; > + > + vfio_disable_irqindex(vdev, VFIO_PCI_MSIX_IRQ_INDEX); > + vdev->nr_vectors = vector + 1; > + ret = vfio_enable_vectors(vdev, true); > + if (ret) { > + error_report("vfio: failed to enable vectors, %d\n", ret); > + } > + > + /* We don't know if we've missed interrupts in the interim... */ > + for (i = 0; i < vdev->msix->entries; i++) { > + if (vdev->msi_vectors[i].use) { > + msix_notify(&vdev->pdev, i); > + } > + } And it wasn't possible to provide an interface with VFIO that allows vector addition/removal on the fly? KVM has an aweful one in this regard, but that is legacy, VFIO is new. The above logic is a bit ugly IMHO. > + } else { > + struct vfio_irq_set_fd irq_set_fd = { > + .irq_set = { > + .argsz = sizeof(irq_set_fd), > + .flags = VFIO_IRQ_SET_DATA_EVENTFD | > + VFIO_IRQ_SET_ACTION_TRIGGER, > + .index = VFIO_PCI_MSIX_IRQ_INDEX, > + .start = vector, > + .count = 1, > + }, > + .fd = fd, > + }; > + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); > + if (ret) { > + error_report("vfio: failed to modify vector, %d\n", ret); > + } > + msix_notify(&vdev->pdev, vector); That injection should no longer be needed once we bounce and record in the PBA, right? Maybe add a comment for now. > + } > + > + return 0; > +} > + > +static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int vector) > +{ > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > + struct vfio_irq_set_fd irq_set_fd = { > + .irq_set = { > + .argsz = sizeof(irq_set_fd), > + .flags = VFIO_IRQ_SET_DATA_EVENTFD | > + VFIO_IRQ_SET_ACTION_TRIGGER, > + .index = VFIO_PCI_MSIX_IRQ_INDEX, > + .start = vector, > + .count = 1, > + }, > + .fd = -1, > + }; > + int fd; > + > + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d released\n", __func__, > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function, vector); > + > + /* > + * XXX What's the right thing to do here? This turns off the interrupt > + * completely, but do we really just want to switch the interrupt to > + * bouncing through userspace and let msix.c drop it? Not sure. > + */ > + msix_vector_unuse(pdev, vector); > + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); > + > + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); > + > + if (vdev->msi_vectors[vector].virq < 0) { > + qemu_set_fd_handler(fd, NULL, NULL, NULL); > + } else { > + kvm_irqchip_remove_irqfd(kvm_state, fd, vdev->msi_vectors[vector].virq); > + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[vector].virq); > + vdev->msi_vectors[vector].virq = -1; > + } > + > + event_notifier_cleanup(&vdev->msi_vectors[vector].interrupt); > + vdev->msi_vectors[vector].use = false; > +} > + > +/* XXX This should move to msi.c */ Nope. We rather need notifier support for MSI. I only have an outdated patch at hand. > +static MSIMessage msi_get_msg(PCIDevice *pdev, unsigned int vector) > +{ > + uint16_t flags = pci_get_word(pdev->config + pdev->msi_cap + PCI_MSI_FLAGS); > + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT; > + MSIMessage msg; > + > + if (msi64bit) { > + msg.address = pci_get_quad(pdev->config + > + pdev->msi_cap + PCI_MSI_ADDRESS_LO); > + } else { > + msg.address = pci_get_long(pdev->config + > + pdev->msi_cap + PCI_MSI_ADDRESS_LO); > + } > + > + msg.data = pci_get_word(pdev->config + pdev->msi_cap + > + (msi64bit ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32)); > + msg.data += vector; > + > + return msg; > +} > + > +/* So should this */ > +static void msi_set_qsize(PCIDevice *pdev, uint8_t size) > +{ > + uint8_t *config = pdev->config + pdev->msi_cap; > + uint16_t flags; > + > + flags = pci_get_word(config + PCI_MSI_FLAGS); > + flags = le16_to_cpu(flags); > + flags &= ~PCI_MSI_FLAGS_QSIZE; > + flags |= (size & 0x7) << 4; > + flags = cpu_to_le16(flags); > + pci_set_word(config + PCI_MSI_FLAGS, flags); Hmm... > +} > + > +static void vfio_enable_msi(VFIODevice *vdev) > +{ > + int ret, i; > + > + vfio_disable_interrupts(vdev); > + > + vdev->nr_vectors = msi_nr_vectors_allocated(&vdev->pdev); > +retry: > + vdev->msi_vectors = g_malloc0(vdev->nr_vectors * sizeof(MSIVector)); > + > + for (i = 0; i < vdev->nr_vectors; i++) { > + MSIMessage msg; > + int fd; > + > + vdev->msi_vectors[i].vdev = vdev; > + vdev->msi_vectors[i].vector = i; > + vdev->msi_vectors[i].use = true; > + > + if (event_notifier_init(&vdev->msi_vectors[i].interrupt, 0)) { > + error_report("vfio: Error: event_notifier_init failed\n"); > + } > + > + fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); > + > + msg = msi_get_msg(&vdev->pdev, i); > + > + /* > + * Attempt to enable route through KVM irqchip, > + * default to userspace handling if unavailable. > + */ > + vdev->msi_vectors[i].virq = kvm_irqchip_add_msi_route(kvm_state, msg); > + if (vdev->msi_vectors[i].virq < 0 || > + kvm_irqchip_add_irqfd(kvm_state, fd, > + vdev->msi_vectors[i].virq) < 0) { > + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, > + &vdev->msi_vectors[i]); > + } > + } > + > + ret = vfio_enable_vectors(vdev, false); > + if (ret) { > + if (ret < 0) { > + error_report("vfio: Error: Failed to setup MSI fds: %s\n", > + strerror(errno)); > + } else if (ret != vdev->nr_vectors) { > + error_report("vfio: Error: Failed to enable %d " > + "MSI vectors, retry with %d\n", vdev->nr_vectors, ret); > + } > + > + for (i = 0; i < vdev->nr_vectors; i++) { > + int fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); > + if (vdev->msi_vectors[i].virq >= 0) { > + kvm_irqchip_remove_irqfd(kvm_state, fd, > + vdev->msi_vectors[i].virq); > + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[i].virq); > + vdev->msi_vectors[i].virq = -1; > + } else { > + qemu_set_fd_handler(fd, NULL, NULL, NULL); > + } > + event_notifier_cleanup(&vdev->msi_vectors[i].interrupt); > + } > + > + g_free(vdev->msi_vectors); > + > + if (ret > 0 && ret != vdev->nr_vectors) { > + vdev->nr_vectors = ret; > + goto retry; > + } > + vdev->nr_vectors = 0; > + > + return; > + } > + > + msi_set_qsize(&vdev->pdev, vdev->nr_vectors); Hmmm... Can we really patch qsize? While the guest is already running and possibly evaluated this field before? IOW: Does the spec allow it to be changed by the device and, if yes, in which states? > + > + DPRINTF("%s(%04x:%02x:%02x.%x) Enabled %d MSI vectors\n", __func__, > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function, vdev->nr_vectors); > +} > + ... > + > +static int vfio_setup_msi(VFIODevice *vdev, int pos) > +{ > + uint16_t ctrl; > + bool msi_64bit, msi_maskbit; > + int ret, entries; > + > + if (!msi_supported) { Not critical, but I would prefer to keep this variable in the context of the MSI core. msi_init will return ENOTSUP, and you could handle that gracefully. > + return 0; > + } > + > + if (pread(vdev->fd, &ctrl, sizeof(ctrl), > + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { > + return -1; > + } > + ctrl = le16_to_cpu(ctrl); > + > + msi_64bit = !!(ctrl & PCI_MSI_FLAGS_64BIT); > + msi_maskbit = !!(ctrl & PCI_MSI_FLAGS_MASKBIT); > + entries = 1 << ((ctrl & PCI_MSI_FLAGS_QMASK) >> 1); > + > + DPRINTF("%04x:%02x:%02x.%x PCI MSI CAP @0x%x\n", vdev->host.domain, > + vdev->host.bus, vdev->host.slot, vdev->host.function, pos); > + > + ret = msi_init(&vdev->pdev, pos, entries, msi_64bit, msi_maskbit); > + if (ret < 0) { > + error_report("vfio: msi_init failed\n"); > + return ret; > + } > + vdev->msi_cap_size = 0xa + (msi_maskbit ? 0xa : 0) + (msi_64bit ? 0x4 : 0); > + > + return 0; > +} > + > +/* > + * We don't have any control over how pci_add_capability() inserts > + * capabilities into the chain. What control is missing precisely? Can pci_add_capability be improved to simplify the early setup? I don't see it (msix_init requires the parameters), but the comment suggests this somehow. > In order to setup MSI-X we need a > + * MemoryRegion for the BAR. In order to setup the BAR and not > + * attempt to mmap the MSI-X table area, which VFIO won't allow, we > + * need to first look for where the MSI-X table lives. So we > + * unfortunately split MSI-X setup across two functions. > + */ > +static int vfio_early_setup_msix(VFIODevice *vdev) > +{ > + uint8_t pos; > + uint16_t ctrl; > + uint32_t table, pba; > + > + pos = pci_find_capability(&vdev->pdev, PCI_CAP_ID_MSIX); > + if (!pos) { > + return 0; > + } > + > + if (pread(vdev->fd, &ctrl, sizeof(ctrl), > + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { > + return -1; > + } > + > + if (pread(vdev->fd, &table, sizeof(table), > + vdev->config_offset + pos + PCI_MSIX_TABLE) != sizeof(table)) { > + return -1; > + } > + > + if (pread(vdev->fd, &pba, sizeof(pba), > + vdev->config_offset + pos + PCI_MSIX_PBA) != sizeof(pba)) { > + return -1; > + } > + > + ctrl = le16_to_cpu(ctrl); > + table = le32_to_cpu(table); > + pba = le32_to_cpu(pba); > + > + vdev->msix = g_malloc0(sizeof(*(vdev->msix))); > + vdev->msix->table_bar = table & PCI_MSIX_FLAGS_BIRMASK; > + vdev->msix->table_offset = table & ~PCI_MSIX_FLAGS_BIRMASK; > + vdev->msix->pba_bar = pba & PCI_MSIX_FLAGS_BIRMASK; > + vdev->msix->pba_offset = pba & ~PCI_MSIX_FLAGS_BIRMASK; > + vdev->msix->entries = (ctrl & PCI_MSIX_FLAGS_QSIZE) + 1; > + > + DPRINTF("%04x:%02x:%02x.%x " > + "PCI MSI-X CAP @0x%x, BAR %d, offset 0x%x, entries %d\n", > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function, pos, vdev->msix->table_bar, > + vdev->msix->table_offset, vdev->msix->entries); > + > + return 0; > +} > + > +static int vfio_setup_msix(VFIODevice *vdev, int pos) > +{ > + int ret; > + > + if (!msi_supported) { See above. > + return 0; > + } > + > + ret = msix_init(&vdev->pdev, vdev->msix->entries, > + &vdev->bars[vdev->msix->table_bar].mem, > + vdev->msix->table_bar, vdev->msix->table_offset, > + &vdev->bars[vdev->msix->pba_bar].mem, > + vdev->msix->pba_bar, vdev->msix->pba_offset, pos); > + if (ret < 0) { > + error_report("vfio: msix_init failed\n"); > + return ret; > + } > + > + ret = msix_set_vector_notifiers(&vdev->pdev, vfio_msix_vector_use, > + vfio_msix_vector_release); > + if (ret) { > + error_report("vfio: msix_set_vector_notifiers failed %d\n", ret); > + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, > + &vdev->bars[vdev->msix->pba_bar].mem); > + return ret; > + } > + > + return 0; > +} > + > +static void vfio_teardown_msi(VFIODevice *vdev) > +{ > + msi_uninit(&vdev->pdev); > + > + if (vdev->msix) { > + /* FIXME: Why can't unset just silently do nothing?? */ Yep, that would be better. > + if (vdev->pdev.msix_vector_use_notifier && > + vdev->pdev.msix_vector_release_notifier) { > + msix_unset_vector_notifiers(&vdev->pdev); > + } > + > + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, > + &vdev->bars[vdev->msix->pba_bar].mem); > + } > +} > + > +/* > + * Resource setup > + */ > +static void vfio_unmap_bar(VFIODevice *vdev, int nr) > +{ > + VFIOBAR *bar = &vdev->bars[nr]; > + > + if (!bar->size) { > + return; > + } > + > + memory_region_del_subregion(&bar->mem, &bar->mmap_mem); > + munmap(bar->mmap, memory_region_size(&bar->mmap_mem)); > + > + if (vdev->msix && vdev->msix->table_bar == nr) { > + memory_region_del_subregion(&bar->mem, &vdev->msix->mmap_mem); > + munmap(vdev->msix->mmap, memory_region_size(&vdev->msix->mmap_mem)); > + } > + > + memory_region_destroy(&bar->mem); > +} > + > +static int vfio_mmap_bar(VFIOBAR *bar, MemoryRegion *mem, MemoryRegion *submem, > + void **map, size_t size, off_t offset, > + const char *name) > +{ > + int ret = 0; > + > + if (size && bar->flags & VFIO_REGION_INFO_FLAG_MMAP) { > + int prot = 0; > + > + if (bar->flags & VFIO_REGION_INFO_FLAG_READ) { > + prot |= PROT_READ; > + } > + > + if (bar->flags & VFIO_REGION_INFO_FLAG_WRITE) { > + prot |= PROT_WRITE; > + } > + > + *map = mmap(NULL, size, prot, MAP_SHARED, > + bar->fd, bar->fd_offset + offset); > + if (*map == MAP_FAILED) { > + *map = NULL; > + ret = -errno; > + goto empty_region; > + } > + > + memory_region_init_ram_ptr(submem, name, size, *map); > + } else { > +empty_region: > + /* Create a zero sized sub-region to make cleanup easy. */ > + memory_region_init(submem, name, 0); > + } > + > + memory_region_add_subregion(mem, offset, submem); > + > + return ret; > +} > + > +static void vfio_map_bar(VFIODevice *vdev, int nr) > +{ > + VFIOBAR *bar = &vdev->bars[nr]; > + unsigned size = bar->size; > + char name[64]; > + uint32_t pci_bar; > + uint8_t type; > + int ret; > + > + /* Skip both unimplemented BARs and the upper half of 64bit BARS. */ > + if (!size) { > + return; > + } > + > + snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d", > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function, nr); > + > + /* Determine what type of BAR this is for registration */ > + ret = pread(vdev->fd, &pci_bar, sizeof(pci_bar), > + vdev->config_offset + PCI_BASE_ADDRESS_0 + (4 * nr)); > + if (ret != sizeof(pci_bar)) { > + error_report("vfio: Failed to read BAR %d (%s)\n", nr, strerror(errno)); > + return; > + } > + > + pci_bar = le32_to_cpu(pci_bar); > + type = pci_bar & (pci_bar & PCI_BASE_ADDRESS_SPACE_IO ? > + ~PCI_BASE_ADDRESS_IO_MASK : ~PCI_BASE_ADDRESS_MEM_MASK); > + > + /* A "slow" read/write mapping underlies all BARs */ > + memory_region_init_io(&bar->mem, &vfio_bar_ops, bar, name, size); > + pci_register_bar(&vdev->pdev, nr, type, &bar->mem); > + > + /* > + * We can't mmap areas overlapping the MSIX vector table, so we > + * potentially insert a direct-mapped subregion before and after it. > + */ > + if (vdev->msix && vdev->msix->table_bar == nr) { > + size = vdev->msix->table_offset & TARGET_PAGE_MASK; > + } > + > + strncat(name, " mmap", sizeof(name) - strlen(name) - 1); This could generate an unterminated name if we actually have to cut the appended string. You could set name[sizeof(name)-1] = 0. > + if (vfio_mmap_bar(bar, &bar->mem, > + &bar->mmap_mem, &bar->mmap, size, 0, name)) { > + error_report("%s unsupported. Performance may be slow\n", name); > + } > + > + if (vdev->msix && vdev->msix->table_bar == nr) { > + unsigned start; > + > + start = TARGET_PAGE_ALIGN(vdev->msix->table_offset + > + (vdev->msix->entries * PCI_MSIX_ENTRY_SIZE)); > + > + size = start < bar->size ? bar->size - start : 0; > + strncat(name, " msix-hi", sizeof(name) - strlen(name) - 1); Same here. > + /* MSIXInfo contains another MemoryRegion for this mapping */ > + if (vfio_mmap_bar(bar, &bar->mem, &vdev->msix->mmap_mem, > + &vdev->msix->mmap, size, start, name)) { > + error_report("%s unsupported. Performance may be slow\n", name); > + } > + } > + > + return; Unneeded return. > +} > + ... > + > +static int vfio_initfn(struct PCIDevice *pdev) > +{ > + VFIODevice *pvdev, *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > + VFIOGroup *group; > + char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name; > + ssize_t len; > + struct stat st; > + int groupid; > + int ret; > + > + /* Check that the host device exists */ > + snprintf(path, sizeof(path), > + "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/", > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function); > + if (stat(path, &st) < 0) { > + error_report("vfio: error: no such host device: %s", path); > + return -1; > + } > + > + strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1); See above for the termination problem. > + > + len = readlink(path, iommu_group_path, PATH_MAX); > + if (len <= 0) { > + error_report("vfio: error no iommu_group for device\n"); > + return -1; > + } > + > + iommu_group_path[len] = 0; > + group_name = basename(iommu_group_path); > + > + if (sscanf(group_name, "%d", &groupid) != 1) { > + error_report("vfio: error reading %s: %s", path, strerror(errno)); > + return -1; > + } > + > + DPRINTF("%s(%04x:%02x:%02x.%x) group %d\n", __func__, vdev->host.domain, > + vdev->host.bus, vdev->host.slot, vdev->host.function, groupid); > + > + group = vfio_get_group(groupid); > + if (!group) { > + error_report("vfio: failed to get group %d", groupid); > + return -1; > + } > + > + snprintf(path, sizeof(path), "%04x:%02x:%02x.%01x", > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function); > + > + QLIST_FOREACH(pvdev, &group->device_list, next) { > + if (pvdev->host.domain == vdev->host.domain && > + pvdev->host.bus == vdev->host.bus && > + pvdev->host.slot == vdev->host.slot && > + pvdev->host.function == vdev->host.function) { > + > + error_report("vfio: error: device %s is already attached\n", path); > + vfio_put_group(group); > + return -1; > + } > + } > + > + ret = vfio_get_device(group, path, vdev); > + if (ret) { > + error_report("vfio: failed to get device %s", path); > + vfio_put_group(group); > + return -1; > + } > + > + /* Get a copy of config space */ > + assert(pci_config_size(&vdev->pdev) <= vdev->config_size); > + ret = pread(vdev->fd, vdev->pdev.config, > + pci_config_size(&vdev->pdev), vdev->config_offset); > + if (ret < (int)pci_config_size(&vdev->pdev)) { > + error_report("vfio: Failed to read device config space\n"); > + goto out_put; > + } > + > + /* > + * Clear host resource mapping info. If we choose not to register a > + * BAR, such as might be the case with the option ROM, we can get > + * confusing, unwritable, residual addresses from the host here. > + */ > + memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24); > + memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4); > + > + vfio_load_rom(vdev); > + > + if (vfio_early_setup_msix(vdev)) { > + goto out_put; > + } > + > + vfio_map_bars(vdev); > + > + if (vfio_add_capabilities(vdev)) { > + goto out_teardown; > + } > + > + if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) { > + pci_device_set_intx_routing_notifier(&vdev->pdev, vfio_update_irq); > + } > + > + if (vfio_enable_intx(vdev)) { Although vfio_enable_intx also check for PCI_INTERRUPT_PIN, I would move this under the test above - more consistent when reading the code. > + goto out_teardown; > + } > + > + return 0; > + > +out_teardown: > + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); > + vfio_teardown_msi(vdev); > + vfio_unmap_bars(vdev); > +out_put: > + vfio_put_device(vdev); > + vfio_put_group(group); > + return -1; > +} > + > +static void vfio_exitfn(struct PCIDevice *pdev) > +{ > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > + VFIOGroup *group = vdev->group; > + > + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); > + vfio_disable_interrupts(vdev); > + vfio_teardown_msi(vdev); > + vfio_unmap_bars(vdev); > + vfio_put_device(vdev); > + vfio_put_group(group); > +} > + > +static void vfio_reset(DeviceState *dev) > +{ > + PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, dev); > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > + > + if (!vdev->reset_works) { > + return; > + } > + > + if (ioctl(vdev->fd, VFIO_DEVICE_RESET)) { > + error_report("vfio: Error unable to reset physical device " > + "(%04x:%02x:%02x.%x): %s\n", vdev->host.domain, > + vdev->host.bus, vdev->host.slot, vdev->host.function, > + strerror(errno)); > + } > +} > + > +static Property vfio_pci_dev_properties[] = { > + DEFINE_PROP_PCI_HOST_DEVADDR("host", VFIODevice, host), > + /* > + * TODO - support passed fds... is this necessary? > + * DEFINE_PROP_STRING("vfiofd", VFIODevice, vfiofd_name), > + * DEFINE_PROP_STRING("vfiogroupfd, VFIODevice, vfiogroupfd_name), > + */ > + DEFINE_PROP_END_OF_LIST(), > +}; > + > + > +static void vfio_pci_dev_class_init(ObjectClass *klass, void *data) > +{ > + PCIDeviceClass *dc = PCI_DEVICE_CLASS(klass); > + > + dc->parent_class.reset = vfio_reset; > + dc->init = vfio_initfn; > + dc->exit = vfio_exitfn; > + dc->config_read = vfio_pci_read_config; > + dc->config_write = vfio_pci_write_config; > + dc->parent_class.props = vfio_pci_dev_properties; > +} > + > +static TypeInfo vfio_pci_dev_info = { > + .name = "vfio-pci", > + .parent = TYPE_PCI_DEVICE, > + .instance_size = sizeof(VFIODevice), > + .class_init = vfio_pci_dev_class_init, > +}; > + > +static void register_vfio_pci_dev_type(void) > +{ > + type_register_static(&vfio_pci_dev_info); > +} > + > +type_init(register_vfio_pci_dev_type) > diff --git a/hw/vfio_pci.h b/hw/vfio_pci.h > new file mode 100644 > index 0000000..0a71bce > --- /dev/null > +++ b/hw/vfio_pci.h > @@ -0,0 +1,101 @@ > +#ifndef HW_VFIO_PCI_H > +#define HW_VFIO_PCI_H > + > +#include "qemu-common.h" > +#include "qemu-queue.h" > +#include "pci.h" > +#include "event_notifier.h" > + > +typedef struct VFIOBAR { > + off_t fd_offset; /* offset of BAR within device fd */ > + int fd; /* device fd, allows us to pass VFIOBAR as opaque data */ > + MemoryRegion mem; /* slow, read/write access */ > + MemoryRegion mmap_mem; /* direct mapped access */ > + void *mmap; > + size_t size; > + uint32_t flags; /* VFIO region flags (rd/wr/mmap) */ > + uint8_t nr; /* cache the BAR number for debug */ > +} VFIOBAR; > + > +typedef struct INTx { > + bool pending; /* interrupt pending */ > + bool kvm_accel; /* set when QEMU bypass through KVM enabled */ > + uint8_t pin; /* which pin to pull for qemu_set_irq */ > + EventNotifier interrupt; /* eventfd triggered on interrupt */ > + EventNotifier unmask; /* eventfd for unmask on QEMU bypass */ > + PCIINTxRoute route; /* routing info for QEMU bypass */ > +} INTx; Please add a VFIO prefix. > + > +struct VFIODevice; > + > +typedef struct MSIVector { > + EventNotifier interrupt; /* eventfd triggered on interrupt */ > + struct VFIODevice *vdev; /* back pointer to device */ > + int vector; /* the vector number for this element */ Could also be calculated via vector - vector->vdev->msi_vectors. But I don't mind. > + int virq; /* KVM irqchip route for QEMU bypass */ > + bool use; > +} MSIVector; Also here. Just in case we ever decide to introduce a generic structure with this name. > + > +enum { > + INT_NONE = 0, > + INT_INTx = 1, > + INT_MSI = 2, > + INT_MSIX = 3, > +}; > + > +struct VFIOGroup; > + > +typedef struct VFIOContainer { > + int fd; /* /dev/vfio/vfio, empowered by the attached groups */ > + struct { > + /* enable abstraction to support various iommu backends */ > + union { > + MemoryListener listener; /* Used by type1 iommu */ > + }; > + void (*release)(struct VFIOContainer *); > + } iommu_data; > + QLIST_HEAD(, VFIOGroup) group_list; > + QLIST_ENTRY(VFIOContainer) next; > +} VFIOContainer; > + > +/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */ > +typedef struct MSIXInfo { > + uint8_t table_bar; > + uint8_t pba_bar; > + uint16_t entries; > + uint32_t table_offset; > + uint32_t pba_offset; > + MemoryRegion mmap_mem; > + void *mmap; > +} MSIXInfo; Also a pretty generic name. > + > +typedef struct VFIODevice { > + PCIDevice pdev; > + int fd; > + INTx intx; > + unsigned int config_size; > + off_t config_offset; /* Offset of config space region within device fd */ > + unsigned int rom_size; > + off_t rom_offset; /* Offset of ROM region within device fd */ > + int msi_cap_size; > + MSIVector *msi_vectors; > + MSIXInfo *msix; > + int nr_vectors; /* Number of MSI/MSIX vectors currently in use */ > + int interrupt; /* Current interrupt type */ > + VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */ > + PCIHostDeviceAddress host; > + QLIST_ENTRY(VFIODevice) next; > + struct VFIOGroup *group; > + bool reset_works; > +} VFIODevice; > + > +typedef struct VFIOGroup { > + int fd; > + int groupid; > + VFIOContainer *container; > + QLIST_HEAD(, VFIODevice) device_list; > + QLIST_ENTRY(VFIOGroup) next; > + QLIST_ENTRY(VFIOGroup) container_next; > +} VFIOGroup; > + > +#endif /* HW_VFIO_PCI_H */ > Why do all theses structs have to go into a header file? Will there be more users than vfio_pci.c? Jan -- Siemens AG, Corporate Technology, CT RTC ITP SDP-DE Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Qemu-devel] [PATCH v2 3/4] vfio: vfio-pci device assignment driver @ 2012-08-14 17:40 ` Jan Kiszka 0 siblings, 0 replies; 16+ messages in thread From: Jan Kiszka @ 2012-08-14 17:40 UTC (permalink / raw) To: Alex Williamson Cc: aik@ozlabs.ru, aliguori@us.ibm.com, qemu-devel@nongnu.org, kvm@vger.kernel.org Just some comments, didn't look at all details. On 2012-08-02 21:17, Alex Williamson wrote: > + > +static int vfio_msix_vector_use(PCIDevice *pdev, > + unsigned int vector, MSIMessage msg) > +{ > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > + int ret, fd; > + > + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d used\n", __func__, > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function, vector); > + > + if (vdev->interrupt != INT_MSIX) { > + vfio_disable_interrupts(vdev); > + } > + > + if (!vdev->msi_vectors) { > + vdev->msi_vectors = g_malloc0(vdev->msix->entries * sizeof(MSIVector)); > + } > + > + vdev->msi_vectors[vector].vdev = vdev; > + vdev->msi_vectors[vector].vector = vector; > + vdev->msi_vectors[vector].use = true; > + > + msix_vector_use(pdev, vector); > + > + if (event_notifier_init(&vdev->msi_vectors[vector].interrupt, 0)) { > + error_report("vfio: Error: event_notifier_init failed\n"); > + } > + > + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); > + > + /* > + * Attempt to enable route through KVM irqchip, > + * default to userspace handling if unavailable. > + */ > + vdev->msi_vectors[vector].virq = kvm_irqchip_add_msi_route(kvm_state, msg); > + if (vdev->msi_vectors[vector].virq < 0 || > + kvm_irqchip_add_irqfd(kvm_state, fd, > + vdev->msi_vectors[vector].virq) < 0) { If kvm_irqchip_add_irqfd fails, you have to drop the route and set virq to -1. Otherwise, you won't match with the release logic below. > + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, > + &vdev->msi_vectors[vector]); > + } > + > + /* > + * We don't want to have the host allocate all possible MSI vectors > + * for a device if they're not in use, so we shutdown and incrementally > + * increase them as needed. > + */ > + if (vdev->nr_vectors < vector + 1) { > + int i; > + > + vfio_disable_irqindex(vdev, VFIO_PCI_MSIX_IRQ_INDEX); > + vdev->nr_vectors = vector + 1; > + ret = vfio_enable_vectors(vdev, true); > + if (ret) { > + error_report("vfio: failed to enable vectors, %d\n", ret); > + } > + > + /* We don't know if we've missed interrupts in the interim... */ > + for (i = 0; i < vdev->msix->entries; i++) { > + if (vdev->msi_vectors[i].use) { > + msix_notify(&vdev->pdev, i); > + } > + } And it wasn't possible to provide an interface with VFIO that allows vector addition/removal on the fly? KVM has an aweful one in this regard, but that is legacy, VFIO is new. The above logic is a bit ugly IMHO. > + } else { > + struct vfio_irq_set_fd irq_set_fd = { > + .irq_set = { > + .argsz = sizeof(irq_set_fd), > + .flags = VFIO_IRQ_SET_DATA_EVENTFD | > + VFIO_IRQ_SET_ACTION_TRIGGER, > + .index = VFIO_PCI_MSIX_IRQ_INDEX, > + .start = vector, > + .count = 1, > + }, > + .fd = fd, > + }; > + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); > + if (ret) { > + error_report("vfio: failed to modify vector, %d\n", ret); > + } > + msix_notify(&vdev->pdev, vector); That injection should no longer be needed once we bounce and record in the PBA, right? Maybe add a comment for now. > + } > + > + return 0; > +} > + > +static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int vector) > +{ > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > + struct vfio_irq_set_fd irq_set_fd = { > + .irq_set = { > + .argsz = sizeof(irq_set_fd), > + .flags = VFIO_IRQ_SET_DATA_EVENTFD | > + VFIO_IRQ_SET_ACTION_TRIGGER, > + .index = VFIO_PCI_MSIX_IRQ_INDEX, > + .start = vector, > + .count = 1, > + }, > + .fd = -1, > + }; > + int fd; > + > + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d released\n", __func__, > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function, vector); > + > + /* > + * XXX What's the right thing to do here? This turns off the interrupt > + * completely, but do we really just want to switch the interrupt to > + * bouncing through userspace and let msix.c drop it? Not sure. > + */ > + msix_vector_unuse(pdev, vector); > + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); > + > + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); > + > + if (vdev->msi_vectors[vector].virq < 0) { > + qemu_set_fd_handler(fd, NULL, NULL, NULL); > + } else { > + kvm_irqchip_remove_irqfd(kvm_state, fd, vdev->msi_vectors[vector].virq); > + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[vector].virq); > + vdev->msi_vectors[vector].virq = -1; > + } > + > + event_notifier_cleanup(&vdev->msi_vectors[vector].interrupt); > + vdev->msi_vectors[vector].use = false; > +} > + > +/* XXX This should move to msi.c */ Nope. We rather need notifier support for MSI. I only have an outdated patch at hand. > +static MSIMessage msi_get_msg(PCIDevice *pdev, unsigned int vector) > +{ > + uint16_t flags = pci_get_word(pdev->config + pdev->msi_cap + PCI_MSI_FLAGS); > + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT; > + MSIMessage msg; > + > + if (msi64bit) { > + msg.address = pci_get_quad(pdev->config + > + pdev->msi_cap + PCI_MSI_ADDRESS_LO); > + } else { > + msg.address = pci_get_long(pdev->config + > + pdev->msi_cap + PCI_MSI_ADDRESS_LO); > + } > + > + msg.data = pci_get_word(pdev->config + pdev->msi_cap + > + (msi64bit ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32)); > + msg.data += vector; > + > + return msg; > +} > + > +/* So should this */ > +static void msi_set_qsize(PCIDevice *pdev, uint8_t size) > +{ > + uint8_t *config = pdev->config + pdev->msi_cap; > + uint16_t flags; > + > + flags = pci_get_word(config + PCI_MSI_FLAGS); > + flags = le16_to_cpu(flags); > + flags &= ~PCI_MSI_FLAGS_QSIZE; > + flags |= (size & 0x7) << 4; > + flags = cpu_to_le16(flags); > + pci_set_word(config + PCI_MSI_FLAGS, flags); Hmm... > +} > + > +static void vfio_enable_msi(VFIODevice *vdev) > +{ > + int ret, i; > + > + vfio_disable_interrupts(vdev); > + > + vdev->nr_vectors = msi_nr_vectors_allocated(&vdev->pdev); > +retry: > + vdev->msi_vectors = g_malloc0(vdev->nr_vectors * sizeof(MSIVector)); > + > + for (i = 0; i < vdev->nr_vectors; i++) { > + MSIMessage msg; > + int fd; > + > + vdev->msi_vectors[i].vdev = vdev; > + vdev->msi_vectors[i].vector = i; > + vdev->msi_vectors[i].use = true; > + > + if (event_notifier_init(&vdev->msi_vectors[i].interrupt, 0)) { > + error_report("vfio: Error: event_notifier_init failed\n"); > + } > + > + fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); > + > + msg = msi_get_msg(&vdev->pdev, i); > + > + /* > + * Attempt to enable route through KVM irqchip, > + * default to userspace handling if unavailable. > + */ > + vdev->msi_vectors[i].virq = kvm_irqchip_add_msi_route(kvm_state, msg); > + if (vdev->msi_vectors[i].virq < 0 || > + kvm_irqchip_add_irqfd(kvm_state, fd, > + vdev->msi_vectors[i].virq) < 0) { > + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, > + &vdev->msi_vectors[i]); > + } > + } > + > + ret = vfio_enable_vectors(vdev, false); > + if (ret) { > + if (ret < 0) { > + error_report("vfio: Error: Failed to setup MSI fds: %s\n", > + strerror(errno)); > + } else if (ret != vdev->nr_vectors) { > + error_report("vfio: Error: Failed to enable %d " > + "MSI vectors, retry with %d\n", vdev->nr_vectors, ret); > + } > + > + for (i = 0; i < vdev->nr_vectors; i++) { > + int fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); > + if (vdev->msi_vectors[i].virq >= 0) { > + kvm_irqchip_remove_irqfd(kvm_state, fd, > + vdev->msi_vectors[i].virq); > + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[i].virq); > + vdev->msi_vectors[i].virq = -1; > + } else { > + qemu_set_fd_handler(fd, NULL, NULL, NULL); > + } > + event_notifier_cleanup(&vdev->msi_vectors[i].interrupt); > + } > + > + g_free(vdev->msi_vectors); > + > + if (ret > 0 && ret != vdev->nr_vectors) { > + vdev->nr_vectors = ret; > + goto retry; > + } > + vdev->nr_vectors = 0; > + > + return; > + } > + > + msi_set_qsize(&vdev->pdev, vdev->nr_vectors); Hmmm... Can we really patch qsize? While the guest is already running and possibly evaluated this field before? IOW: Does the spec allow it to be changed by the device and, if yes, in which states? > + > + DPRINTF("%s(%04x:%02x:%02x.%x) Enabled %d MSI vectors\n", __func__, > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function, vdev->nr_vectors); > +} > + ... > + > +static int vfio_setup_msi(VFIODevice *vdev, int pos) > +{ > + uint16_t ctrl; > + bool msi_64bit, msi_maskbit; > + int ret, entries; > + > + if (!msi_supported) { Not critical, but I would prefer to keep this variable in the context of the MSI core. msi_init will return ENOTSUP, and you could handle that gracefully. > + return 0; > + } > + > + if (pread(vdev->fd, &ctrl, sizeof(ctrl), > + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { > + return -1; > + } > + ctrl = le16_to_cpu(ctrl); > + > + msi_64bit = !!(ctrl & PCI_MSI_FLAGS_64BIT); > + msi_maskbit = !!(ctrl & PCI_MSI_FLAGS_MASKBIT); > + entries = 1 << ((ctrl & PCI_MSI_FLAGS_QMASK) >> 1); > + > + DPRINTF("%04x:%02x:%02x.%x PCI MSI CAP @0x%x\n", vdev->host.domain, > + vdev->host.bus, vdev->host.slot, vdev->host.function, pos); > + > + ret = msi_init(&vdev->pdev, pos, entries, msi_64bit, msi_maskbit); > + if (ret < 0) { > + error_report("vfio: msi_init failed\n"); > + return ret; > + } > + vdev->msi_cap_size = 0xa + (msi_maskbit ? 0xa : 0) + (msi_64bit ? 0x4 : 0); > + > + return 0; > +} > + > +/* > + * We don't have any control over how pci_add_capability() inserts > + * capabilities into the chain. What control is missing precisely? Can pci_add_capability be improved to simplify the early setup? I don't see it (msix_init requires the parameters), but the comment suggests this somehow. > In order to setup MSI-X we need a > + * MemoryRegion for the BAR. In order to setup the BAR and not > + * attempt to mmap the MSI-X table area, which VFIO won't allow, we > + * need to first look for where the MSI-X table lives. So we > + * unfortunately split MSI-X setup across two functions. > + */ > +static int vfio_early_setup_msix(VFIODevice *vdev) > +{ > + uint8_t pos; > + uint16_t ctrl; > + uint32_t table, pba; > + > + pos = pci_find_capability(&vdev->pdev, PCI_CAP_ID_MSIX); > + if (!pos) { > + return 0; > + } > + > + if (pread(vdev->fd, &ctrl, sizeof(ctrl), > + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { > + return -1; > + } > + > + if (pread(vdev->fd, &table, sizeof(table), > + vdev->config_offset + pos + PCI_MSIX_TABLE) != sizeof(table)) { > + return -1; > + } > + > + if (pread(vdev->fd, &pba, sizeof(pba), > + vdev->config_offset + pos + PCI_MSIX_PBA) != sizeof(pba)) { > + return -1; > + } > + > + ctrl = le16_to_cpu(ctrl); > + table = le32_to_cpu(table); > + pba = le32_to_cpu(pba); > + > + vdev->msix = g_malloc0(sizeof(*(vdev->msix))); > + vdev->msix->table_bar = table & PCI_MSIX_FLAGS_BIRMASK; > + vdev->msix->table_offset = table & ~PCI_MSIX_FLAGS_BIRMASK; > + vdev->msix->pba_bar = pba & PCI_MSIX_FLAGS_BIRMASK; > + vdev->msix->pba_offset = pba & ~PCI_MSIX_FLAGS_BIRMASK; > + vdev->msix->entries = (ctrl & PCI_MSIX_FLAGS_QSIZE) + 1; > + > + DPRINTF("%04x:%02x:%02x.%x " > + "PCI MSI-X CAP @0x%x, BAR %d, offset 0x%x, entries %d\n", > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function, pos, vdev->msix->table_bar, > + vdev->msix->table_offset, vdev->msix->entries); > + > + return 0; > +} > + > +static int vfio_setup_msix(VFIODevice *vdev, int pos) > +{ > + int ret; > + > + if (!msi_supported) { See above. > + return 0; > + } > + > + ret = msix_init(&vdev->pdev, vdev->msix->entries, > + &vdev->bars[vdev->msix->table_bar].mem, > + vdev->msix->table_bar, vdev->msix->table_offset, > + &vdev->bars[vdev->msix->pba_bar].mem, > + vdev->msix->pba_bar, vdev->msix->pba_offset, pos); > + if (ret < 0) { > + error_report("vfio: msix_init failed\n"); > + return ret; > + } > + > + ret = msix_set_vector_notifiers(&vdev->pdev, vfio_msix_vector_use, > + vfio_msix_vector_release); > + if (ret) { > + error_report("vfio: msix_set_vector_notifiers failed %d\n", ret); > + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, > + &vdev->bars[vdev->msix->pba_bar].mem); > + return ret; > + } > + > + return 0; > +} > + > +static void vfio_teardown_msi(VFIODevice *vdev) > +{ > + msi_uninit(&vdev->pdev); > + > + if (vdev->msix) { > + /* FIXME: Why can't unset just silently do nothing?? */ Yep, that would be better. > + if (vdev->pdev.msix_vector_use_notifier && > + vdev->pdev.msix_vector_release_notifier) { > + msix_unset_vector_notifiers(&vdev->pdev); > + } > + > + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, > + &vdev->bars[vdev->msix->pba_bar].mem); > + } > +} > + > +/* > + * Resource setup > + */ > +static void vfio_unmap_bar(VFIODevice *vdev, int nr) > +{ > + VFIOBAR *bar = &vdev->bars[nr]; > + > + if (!bar->size) { > + return; > + } > + > + memory_region_del_subregion(&bar->mem, &bar->mmap_mem); > + munmap(bar->mmap, memory_region_size(&bar->mmap_mem)); > + > + if (vdev->msix && vdev->msix->table_bar == nr) { > + memory_region_del_subregion(&bar->mem, &vdev->msix->mmap_mem); > + munmap(vdev->msix->mmap, memory_region_size(&vdev->msix->mmap_mem)); > + } > + > + memory_region_destroy(&bar->mem); > +} > + > +static int vfio_mmap_bar(VFIOBAR *bar, MemoryRegion *mem, MemoryRegion *submem, > + void **map, size_t size, off_t offset, > + const char *name) > +{ > + int ret = 0; > + > + if (size && bar->flags & VFIO_REGION_INFO_FLAG_MMAP) { > + int prot = 0; > + > + if (bar->flags & VFIO_REGION_INFO_FLAG_READ) { > + prot |= PROT_READ; > + } > + > + if (bar->flags & VFIO_REGION_INFO_FLAG_WRITE) { > + prot |= PROT_WRITE; > + } > + > + *map = mmap(NULL, size, prot, MAP_SHARED, > + bar->fd, bar->fd_offset + offset); > + if (*map == MAP_FAILED) { > + *map = NULL; > + ret = -errno; > + goto empty_region; > + } > + > + memory_region_init_ram_ptr(submem, name, size, *map); > + } else { > +empty_region: > + /* Create a zero sized sub-region to make cleanup easy. */ > + memory_region_init(submem, name, 0); > + } > + > + memory_region_add_subregion(mem, offset, submem); > + > + return ret; > +} > + > +static void vfio_map_bar(VFIODevice *vdev, int nr) > +{ > + VFIOBAR *bar = &vdev->bars[nr]; > + unsigned size = bar->size; > + char name[64]; > + uint32_t pci_bar; > + uint8_t type; > + int ret; > + > + /* Skip both unimplemented BARs and the upper half of 64bit BARS. */ > + if (!size) { > + return; > + } > + > + snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d", > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function, nr); > + > + /* Determine what type of BAR this is for registration */ > + ret = pread(vdev->fd, &pci_bar, sizeof(pci_bar), > + vdev->config_offset + PCI_BASE_ADDRESS_0 + (4 * nr)); > + if (ret != sizeof(pci_bar)) { > + error_report("vfio: Failed to read BAR %d (%s)\n", nr, strerror(errno)); > + return; > + } > + > + pci_bar = le32_to_cpu(pci_bar); > + type = pci_bar & (pci_bar & PCI_BASE_ADDRESS_SPACE_IO ? > + ~PCI_BASE_ADDRESS_IO_MASK : ~PCI_BASE_ADDRESS_MEM_MASK); > + > + /* A "slow" read/write mapping underlies all BARs */ > + memory_region_init_io(&bar->mem, &vfio_bar_ops, bar, name, size); > + pci_register_bar(&vdev->pdev, nr, type, &bar->mem); > + > + /* > + * We can't mmap areas overlapping the MSIX vector table, so we > + * potentially insert a direct-mapped subregion before and after it. > + */ > + if (vdev->msix && vdev->msix->table_bar == nr) { > + size = vdev->msix->table_offset & TARGET_PAGE_MASK; > + } > + > + strncat(name, " mmap", sizeof(name) - strlen(name) - 1); This could generate an unterminated name if we actually have to cut the appended string. You could set name[sizeof(name)-1] = 0. > + if (vfio_mmap_bar(bar, &bar->mem, > + &bar->mmap_mem, &bar->mmap, size, 0, name)) { > + error_report("%s unsupported. Performance may be slow\n", name); > + } > + > + if (vdev->msix && vdev->msix->table_bar == nr) { > + unsigned start; > + > + start = TARGET_PAGE_ALIGN(vdev->msix->table_offset + > + (vdev->msix->entries * PCI_MSIX_ENTRY_SIZE)); > + > + size = start < bar->size ? bar->size - start : 0; > + strncat(name, " msix-hi", sizeof(name) - strlen(name) - 1); Same here. > + /* MSIXInfo contains another MemoryRegion for this mapping */ > + if (vfio_mmap_bar(bar, &bar->mem, &vdev->msix->mmap_mem, > + &vdev->msix->mmap, size, start, name)) { > + error_report("%s unsupported. Performance may be slow\n", name); > + } > + } > + > + return; Unneeded return. > +} > + ... > + > +static int vfio_initfn(struct PCIDevice *pdev) > +{ > + VFIODevice *pvdev, *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > + VFIOGroup *group; > + char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name; > + ssize_t len; > + struct stat st; > + int groupid; > + int ret; > + > + /* Check that the host device exists */ > + snprintf(path, sizeof(path), > + "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/", > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function); > + if (stat(path, &st) < 0) { > + error_report("vfio: error: no such host device: %s", path); > + return -1; > + } > + > + strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1); See above for the termination problem. > + > + len = readlink(path, iommu_group_path, PATH_MAX); > + if (len <= 0) { > + error_report("vfio: error no iommu_group for device\n"); > + return -1; > + } > + > + iommu_group_path[len] = 0; > + group_name = basename(iommu_group_path); > + > + if (sscanf(group_name, "%d", &groupid) != 1) { > + error_report("vfio: error reading %s: %s", path, strerror(errno)); > + return -1; > + } > + > + DPRINTF("%s(%04x:%02x:%02x.%x) group %d\n", __func__, vdev->host.domain, > + vdev->host.bus, vdev->host.slot, vdev->host.function, groupid); > + > + group = vfio_get_group(groupid); > + if (!group) { > + error_report("vfio: failed to get group %d", groupid); > + return -1; > + } > + > + snprintf(path, sizeof(path), "%04x:%02x:%02x.%01x", > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > + vdev->host.function); > + > + QLIST_FOREACH(pvdev, &group->device_list, next) { > + if (pvdev->host.domain == vdev->host.domain && > + pvdev->host.bus == vdev->host.bus && > + pvdev->host.slot == vdev->host.slot && > + pvdev->host.function == vdev->host.function) { > + > + error_report("vfio: error: device %s is already attached\n", path); > + vfio_put_group(group); > + return -1; > + } > + } > + > + ret = vfio_get_device(group, path, vdev); > + if (ret) { > + error_report("vfio: failed to get device %s", path); > + vfio_put_group(group); > + return -1; > + } > + > + /* Get a copy of config space */ > + assert(pci_config_size(&vdev->pdev) <= vdev->config_size); > + ret = pread(vdev->fd, vdev->pdev.config, > + pci_config_size(&vdev->pdev), vdev->config_offset); > + if (ret < (int)pci_config_size(&vdev->pdev)) { > + error_report("vfio: Failed to read device config space\n"); > + goto out_put; > + } > + > + /* > + * Clear host resource mapping info. If we choose not to register a > + * BAR, such as might be the case with the option ROM, we can get > + * confusing, unwritable, residual addresses from the host here. > + */ > + memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24); > + memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4); > + > + vfio_load_rom(vdev); > + > + if (vfio_early_setup_msix(vdev)) { > + goto out_put; > + } > + > + vfio_map_bars(vdev); > + > + if (vfio_add_capabilities(vdev)) { > + goto out_teardown; > + } > + > + if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) { > + pci_device_set_intx_routing_notifier(&vdev->pdev, vfio_update_irq); > + } > + > + if (vfio_enable_intx(vdev)) { Although vfio_enable_intx also check for PCI_INTERRUPT_PIN, I would move this under the test above - more consistent when reading the code. > + goto out_teardown; > + } > + > + return 0; > + > +out_teardown: > + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); > + vfio_teardown_msi(vdev); > + vfio_unmap_bars(vdev); > +out_put: > + vfio_put_device(vdev); > + vfio_put_group(group); > + return -1; > +} > + > +static void vfio_exitfn(struct PCIDevice *pdev) > +{ > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > + VFIOGroup *group = vdev->group; > + > + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); > + vfio_disable_interrupts(vdev); > + vfio_teardown_msi(vdev); > + vfio_unmap_bars(vdev); > + vfio_put_device(vdev); > + vfio_put_group(group); > +} > + > +static void vfio_reset(DeviceState *dev) > +{ > + PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, dev); > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > + > + if (!vdev->reset_works) { > + return; > + } > + > + if (ioctl(vdev->fd, VFIO_DEVICE_RESET)) { > + error_report("vfio: Error unable to reset physical device " > + "(%04x:%02x:%02x.%x): %s\n", vdev->host.domain, > + vdev->host.bus, vdev->host.slot, vdev->host.function, > + strerror(errno)); > + } > +} > + > +static Property vfio_pci_dev_properties[] = { > + DEFINE_PROP_PCI_HOST_DEVADDR("host", VFIODevice, host), > + /* > + * TODO - support passed fds... is this necessary? > + * DEFINE_PROP_STRING("vfiofd", VFIODevice, vfiofd_name), > + * DEFINE_PROP_STRING("vfiogroupfd, VFIODevice, vfiogroupfd_name), > + */ > + DEFINE_PROP_END_OF_LIST(), > +}; > + > + > +static void vfio_pci_dev_class_init(ObjectClass *klass, void *data) > +{ > + PCIDeviceClass *dc = PCI_DEVICE_CLASS(klass); > + > + dc->parent_class.reset = vfio_reset; > + dc->init = vfio_initfn; > + dc->exit = vfio_exitfn; > + dc->config_read = vfio_pci_read_config; > + dc->config_write = vfio_pci_write_config; > + dc->parent_class.props = vfio_pci_dev_properties; > +} > + > +static TypeInfo vfio_pci_dev_info = { > + .name = "vfio-pci", > + .parent = TYPE_PCI_DEVICE, > + .instance_size = sizeof(VFIODevice), > + .class_init = vfio_pci_dev_class_init, > +}; > + > +static void register_vfio_pci_dev_type(void) > +{ > + type_register_static(&vfio_pci_dev_info); > +} > + > +type_init(register_vfio_pci_dev_type) > diff --git a/hw/vfio_pci.h b/hw/vfio_pci.h > new file mode 100644 > index 0000000..0a71bce > --- /dev/null > +++ b/hw/vfio_pci.h > @@ -0,0 +1,101 @@ > +#ifndef HW_VFIO_PCI_H > +#define HW_VFIO_PCI_H > + > +#include "qemu-common.h" > +#include "qemu-queue.h" > +#include "pci.h" > +#include "event_notifier.h" > + > +typedef struct VFIOBAR { > + off_t fd_offset; /* offset of BAR within device fd */ > + int fd; /* device fd, allows us to pass VFIOBAR as opaque data */ > + MemoryRegion mem; /* slow, read/write access */ > + MemoryRegion mmap_mem; /* direct mapped access */ > + void *mmap; > + size_t size; > + uint32_t flags; /* VFIO region flags (rd/wr/mmap) */ > + uint8_t nr; /* cache the BAR number for debug */ > +} VFIOBAR; > + > +typedef struct INTx { > + bool pending; /* interrupt pending */ > + bool kvm_accel; /* set when QEMU bypass through KVM enabled */ > + uint8_t pin; /* which pin to pull for qemu_set_irq */ > + EventNotifier interrupt; /* eventfd triggered on interrupt */ > + EventNotifier unmask; /* eventfd for unmask on QEMU bypass */ > + PCIINTxRoute route; /* routing info for QEMU bypass */ > +} INTx; Please add a VFIO prefix. > + > +struct VFIODevice; > + > +typedef struct MSIVector { > + EventNotifier interrupt; /* eventfd triggered on interrupt */ > + struct VFIODevice *vdev; /* back pointer to device */ > + int vector; /* the vector number for this element */ Could also be calculated via vector - vector->vdev->msi_vectors. But I don't mind. > + int virq; /* KVM irqchip route for QEMU bypass */ > + bool use; > +} MSIVector; Also here. Just in case we ever decide to introduce a generic structure with this name. > + > +enum { > + INT_NONE = 0, > + INT_INTx = 1, > + INT_MSI = 2, > + INT_MSIX = 3, > +}; > + > +struct VFIOGroup; > + > +typedef struct VFIOContainer { > + int fd; /* /dev/vfio/vfio, empowered by the attached groups */ > + struct { > + /* enable abstraction to support various iommu backends */ > + union { > + MemoryListener listener; /* Used by type1 iommu */ > + }; > + void (*release)(struct VFIOContainer *); > + } iommu_data; > + QLIST_HEAD(, VFIOGroup) group_list; > + QLIST_ENTRY(VFIOContainer) next; > +} VFIOContainer; > + > +/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */ > +typedef struct MSIXInfo { > + uint8_t table_bar; > + uint8_t pba_bar; > + uint16_t entries; > + uint32_t table_offset; > + uint32_t pba_offset; > + MemoryRegion mmap_mem; > + void *mmap; > +} MSIXInfo; Also a pretty generic name. > + > +typedef struct VFIODevice { > + PCIDevice pdev; > + int fd; > + INTx intx; > + unsigned int config_size; > + off_t config_offset; /* Offset of config space region within device fd */ > + unsigned int rom_size; > + off_t rom_offset; /* Offset of ROM region within device fd */ > + int msi_cap_size; > + MSIVector *msi_vectors; > + MSIXInfo *msix; > + int nr_vectors; /* Number of MSI/MSIX vectors currently in use */ > + int interrupt; /* Current interrupt type */ > + VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */ > + PCIHostDeviceAddress host; > + QLIST_ENTRY(VFIODevice) next; > + struct VFIOGroup *group; > + bool reset_works; > +} VFIODevice; > + > +typedef struct VFIOGroup { > + int fd; > + int groupid; > + VFIOContainer *container; > + QLIST_HEAD(, VFIODevice) device_list; > + QLIST_ENTRY(VFIOGroup) next; > + QLIST_ENTRY(VFIOGroup) container_next; > +} VFIOGroup; > + > +#endif /* HW_VFIO_PCI_H */ > Why do all theses structs have to go into a header file? Will there be more users than vfio_pci.c? Jan -- Siemens AG, Corporate Technology, CT RTC ITP SDP-DE Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 3/4] vfio: vfio-pci device assignment driver 2012-08-14 17:40 ` [Qemu-devel] " Jan Kiszka @ 2012-08-14 19:09 ` Alex Williamson -1 siblings, 0 replies; 16+ messages in thread From: Alex Williamson @ 2012-08-14 19:09 UTC (permalink / raw) To: Jan Kiszka Cc: aik@ozlabs.ru, aliguori@us.ibm.com, qemu-devel@nongnu.org, kvm@vger.kernel.org On Tue, 2012-08-14 at 19:40 +0200, Jan Kiszka wrote: > Just some comments, didn't look at all details. Thanks! I'll send out a v3 soon. I think that the off-by-one in strncat doesn't exist though, so would appreciate if you could double check. Individual comments below... > On 2012-08-02 21:17, Alex Williamson wrote: > > + > > +static int vfio_msix_vector_use(PCIDevice *pdev, > > + unsigned int vector, MSIMessage msg) > > +{ > > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > > + int ret, fd; > > + > > + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d used\n", __func__, > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function, vector); > > + > > + if (vdev->interrupt != INT_MSIX) { > > + vfio_disable_interrupts(vdev); > > + } > > + > > + if (!vdev->msi_vectors) { > > + vdev->msi_vectors = g_malloc0(vdev->msix->entries * sizeof(MSIVector)); > > + } > > + > > + vdev->msi_vectors[vector].vdev = vdev; > > + vdev->msi_vectors[vector].vector = vector; > > + vdev->msi_vectors[vector].use = true; > > + > > + msix_vector_use(pdev, vector); > > + > > + if (event_notifier_init(&vdev->msi_vectors[vector].interrupt, 0)) { > > + error_report("vfio: Error: event_notifier_init failed\n"); > > + } > > + > > + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); > > + > > + /* > > + * Attempt to enable route through KVM irqchip, > > + * default to userspace handling if unavailable. > > + */ > > + vdev->msi_vectors[vector].virq = kvm_irqchip_add_msi_route(kvm_state, msg); > > + if (vdev->msi_vectors[vector].virq < 0 || > > + kvm_irqchip_add_irqfd(kvm_state, fd, > > + vdev->msi_vectors[vector].virq) < 0) { > > If kvm_irqchip_add_irqfd fails, you have to drop the route and set virq > to -1. Otherwise, you won't match with the release logic below. Yep, good catch. > > + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, > > + &vdev->msi_vectors[vector]); > > + } > > + > > + /* > > + * We don't want to have the host allocate all possible MSI vectors > > + * for a device if they're not in use, so we shutdown and incrementally > > + * increase them as needed. > > + */ > > + if (vdev->nr_vectors < vector + 1) { > > + int i; > > + > > + vfio_disable_irqindex(vdev, VFIO_PCI_MSIX_IRQ_INDEX); > > + vdev->nr_vectors = vector + 1; > > + ret = vfio_enable_vectors(vdev, true); > > + if (ret) { > > + error_report("vfio: failed to enable vectors, %d\n", ret); > > + } > > + > > + /* We don't know if we've missed interrupts in the interim... */ > > + for (i = 0; i < vdev->msix->entries; i++) { > > + if (vdev->msi_vectors[i].use) { > > + msix_notify(&vdev->pdev, i); > > + } > > + } > > And it wasn't possible to provide an interface with VFIO that allows > vector addition/removal on the fly? KVM has an aweful one in this > regard, but that is legacy, VFIO is new. The above logic is a bit ugly IMHO. Linux doesn't allow it. VFIO has a VFIO_IRQ_INFO_NORESIZE attribute on MSI and MSI-X interrupts to expose this restriction and can be unset if Linux is updated to be more dynamic at some point. > > + } else { > > + struct vfio_irq_set_fd irq_set_fd = { > > + .irq_set = { > > + .argsz = sizeof(irq_set_fd), > > + .flags = VFIO_IRQ_SET_DATA_EVENTFD | > > + VFIO_IRQ_SET_ACTION_TRIGGER, > > + .index = VFIO_PCI_MSIX_IRQ_INDEX, > > + .start = vector, > > + .count = 1, > > + }, > > + .fd = fd, > > + }; > > + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); > > + if (ret) { > > + error_report("vfio: failed to modify vector, %d\n", ret); > > + } > > + msix_notify(&vdev->pdev, vector); > > That injection should no longer be needed once we bounce and record in > the PBA, right? Maybe add a comment for now. Right. Ok. > > + } > > + > > + return 0; > > +} > > + > > +static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int vector) > > +{ > > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > > + struct vfio_irq_set_fd irq_set_fd = { > > + .irq_set = { > > + .argsz = sizeof(irq_set_fd), > > + .flags = VFIO_IRQ_SET_DATA_EVENTFD | > > + VFIO_IRQ_SET_ACTION_TRIGGER, > > + .index = VFIO_PCI_MSIX_IRQ_INDEX, > > + .start = vector, > > + .count = 1, > > + }, > > + .fd = -1, > > + }; > > + int fd; > > + > > + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d released\n", __func__, > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function, vector); > > + > > + /* > > + * XXX What's the right thing to do here? This turns off the interrupt > > + * completely, but do we really just want to switch the interrupt to > > + * bouncing through userspace and let msix.c drop it? Not sure. > > + */ > > + msix_vector_unuse(pdev, vector); > > + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); > > + > > + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); > > + > > + if (vdev->msi_vectors[vector].virq < 0) { > > + qemu_set_fd_handler(fd, NULL, NULL, NULL); > > + } else { > > + kvm_irqchip_remove_irqfd(kvm_state, fd, vdev->msi_vectors[vector].virq); > > + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[vector].virq); > > + vdev->msi_vectors[vector].virq = -1; > > + } > > + > > + event_notifier_cleanup(&vdev->msi_vectors[vector].interrupt); > > + vdev->msi_vectors[vector].use = false; > > +} > > + > > +/* XXX This should move to msi.c */ > > Nope. We rather need notifier support for MSI. I only have an outdated > patch at hand. Yes, MSI needs some of the same interface upgrades as MSI-X has. This is just a bootstrap for now. > > +static MSIMessage msi_get_msg(PCIDevice *pdev, unsigned int vector) > > +{ > > + uint16_t flags = pci_get_word(pdev->config + pdev->msi_cap + PCI_MSI_FLAGS); > > + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT; > > + MSIMessage msg; > > + > > + if (msi64bit) { > > + msg.address = pci_get_quad(pdev->config + > > + pdev->msi_cap + PCI_MSI_ADDRESS_LO); > > + } else { > > + msg.address = pci_get_long(pdev->config + > > + pdev->msi_cap + PCI_MSI_ADDRESS_LO); > > + } > > + > > + msg.data = pci_get_word(pdev->config + pdev->msi_cap + > > + (msi64bit ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32)); > > + msg.data += vector; > > + > > + return msg; > > +} > > + > > +/* So should this */ > > +static void msi_set_qsize(PCIDevice *pdev, uint8_t size) > > +{ > > + uint8_t *config = pdev->config + pdev->msi_cap; > > + uint16_t flags; > > + > > + flags = pci_get_word(config + PCI_MSI_FLAGS); > > + flags = le16_to_cpu(flags); > > + flags &= ~PCI_MSI_FLAGS_QSIZE; > > + flags |= (size & 0x7) << 4; > > + flags = cpu_to_le16(flags); > > + pci_set_word(config + PCI_MSI_FLAGS, flags); > > Hmm... > > > +} > > + > > +static void vfio_enable_msi(VFIODevice *vdev) > > +{ > > + int ret, i; > > + > > + vfio_disable_interrupts(vdev); > > + > > + vdev->nr_vectors = msi_nr_vectors_allocated(&vdev->pdev); > > +retry: > > + vdev->msi_vectors = g_malloc0(vdev->nr_vectors * sizeof(MSIVector)); > > + > > + for (i = 0; i < vdev->nr_vectors; i++) { > > + MSIMessage msg; > > + int fd; > > + > > + vdev->msi_vectors[i].vdev = vdev; > > + vdev->msi_vectors[i].vector = i; > > + vdev->msi_vectors[i].use = true; > > + > > + if (event_notifier_init(&vdev->msi_vectors[i].interrupt, 0)) { > > + error_report("vfio: Error: event_notifier_init failed\n"); > > + } > > + > > + fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); > > + > > + msg = msi_get_msg(&vdev->pdev, i); > > + > > + /* > > + * Attempt to enable route through KVM irqchip, > > + * default to userspace handling if unavailable. > > + */ > > + vdev->msi_vectors[i].virq = kvm_irqchip_add_msi_route(kvm_state, msg); > > + if (vdev->msi_vectors[i].virq < 0 || > > + kvm_irqchip_add_irqfd(kvm_state, fd, > > + vdev->msi_vectors[i].virq) < 0) { > > + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, > > + &vdev->msi_vectors[i]); > > + } > > + } > > + > > + ret = vfio_enable_vectors(vdev, false); > > + if (ret) { > > + if (ret < 0) { > > + error_report("vfio: Error: Failed to setup MSI fds: %s\n", > > + strerror(errno)); > > + } else if (ret != vdev->nr_vectors) { > > + error_report("vfio: Error: Failed to enable %d " > > + "MSI vectors, retry with %d\n", vdev->nr_vectors, ret); > > + } > > + > > + for (i = 0; i < vdev->nr_vectors; i++) { > > + int fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); > > + if (vdev->msi_vectors[i].virq >= 0) { > > + kvm_irqchip_remove_irqfd(kvm_state, fd, > > + vdev->msi_vectors[i].virq); > > + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[i].virq); > > + vdev->msi_vectors[i].virq = -1; > > + } else { > > + qemu_set_fd_handler(fd, NULL, NULL, NULL); > > + } > > + event_notifier_cleanup(&vdev->msi_vectors[i].interrupt); > > + } > > + > > + g_free(vdev->msi_vectors); > > + > > + if (ret > 0 && ret != vdev->nr_vectors) { > > + vdev->nr_vectors = ret; > > + goto retry; > > + } > > + vdev->nr_vectors = 0; > > + > > + return; > > + } > > + > > + msi_set_qsize(&vdev->pdev, vdev->nr_vectors); > > Hmmm... Can we really patch qsize? While the guest is already running > and possibly evaluated this field before? IOW: Does the spec allow it to > be changed by the device and, if yes, in which states? This is really wishful thinking on my part, I haven't proven that it does anything or that anyone ever resamples it. It's probably reasonable to have VFIO report that only a single vector is available (at least on and x86 host) so we could lie in qmask. As you know, our failure options are pretty limited for enabling either MSI or MSI-X, but we also don't want to sit on a pile of vectors in the host. > > + > > + DPRINTF("%s(%04x:%02x:%02x.%x) Enabled %d MSI vectors\n", __func__, > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function, vdev->nr_vectors); > > +} > > + > > ... > > > + > > +static int vfio_setup_msi(VFIODevice *vdev, int pos) > > +{ > > + uint16_t ctrl; > > + bool msi_64bit, msi_maskbit; > > + int ret, entries; > > + > > + if (!msi_supported) { > > Not critical, but I would prefer to keep this variable in the context of > the MSI core. msi_init will return ENOTSUP, and you could handle that > gracefully. Ok, I'll add a TODO to remove it. > > + return 0; > > + } > > + > > + if (pread(vdev->fd, &ctrl, sizeof(ctrl), > > + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { > > + return -1; > > + } > > + ctrl = le16_to_cpu(ctrl); > > + > > + msi_64bit = !!(ctrl & PCI_MSI_FLAGS_64BIT); > > + msi_maskbit = !!(ctrl & PCI_MSI_FLAGS_MASKBIT); > > + entries = 1 << ((ctrl & PCI_MSI_FLAGS_QMASK) >> 1); > > + > > + DPRINTF("%04x:%02x:%02x.%x PCI MSI CAP @0x%x\n", vdev->host.domain, > > + vdev->host.bus, vdev->host.slot, vdev->host.function, pos); > > + > > + ret = msi_init(&vdev->pdev, pos, entries, msi_64bit, msi_maskbit); > > + if (ret < 0) { > > + error_report("vfio: msi_init failed\n"); > > + return ret; > > + } > > + vdev->msi_cap_size = 0xa + (msi_maskbit ? 0xa : 0) + (msi_64bit ? 0x4 : 0); > > + > > + return 0; > > +} > > + > > +/* > > + * We don't have any control over how pci_add_capability() inserts > > + * capabilities into the chain. > > What control is missing precisely? Can pci_add_capability be improved to > simplify the early setup? I don't see it (msix_init requires the > parameters), but the comment suggests this somehow. Capabilities are a linked list and pci_add_capability always inserts at the head of the list. msix_init and msi_init want to call pci_add_capability as part of their setup, that means to get a capability list to match as close as possible to hardware (same capability offsets and ordering), we have to walk to the end of the chain on the physical device and add each to the virtual config space, calling msi_init and msix_init at the right points along the way. This leads to vfio_add_std_cap being a recursive function to handle this. > > In order to setup MSI-X we need a > > + * MemoryRegion for the BAR. In order to setup the BAR and not > > + * attempt to mmap the MSI-X table area, which VFIO won't allow, we > > + * need to first look for where the MSI-X table lives. So we > > + * unfortunately split MSI-X setup across two functions. > > + */ > > +static int vfio_early_setup_msix(VFIODevice *vdev) > > +{ > > + uint8_t pos; > > + uint16_t ctrl; > > + uint32_t table, pba; > > + > > + pos = pci_find_capability(&vdev->pdev, PCI_CAP_ID_MSIX); > > + if (!pos) { > > + return 0; > > + } > > + > > + if (pread(vdev->fd, &ctrl, sizeof(ctrl), > > + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { > > + return -1; > > + } > > + > > + if (pread(vdev->fd, &table, sizeof(table), > > + vdev->config_offset + pos + PCI_MSIX_TABLE) != sizeof(table)) { > > + return -1; > > + } > > + > > + if (pread(vdev->fd, &pba, sizeof(pba), > > + vdev->config_offset + pos + PCI_MSIX_PBA) != sizeof(pba)) { > > + return -1; > > + } > > + > > + ctrl = le16_to_cpu(ctrl); > > + table = le32_to_cpu(table); > > + pba = le32_to_cpu(pba); > > + > > + vdev->msix = g_malloc0(sizeof(*(vdev->msix))); > > + vdev->msix->table_bar = table & PCI_MSIX_FLAGS_BIRMASK; > > + vdev->msix->table_offset = table & ~PCI_MSIX_FLAGS_BIRMASK; > > + vdev->msix->pba_bar = pba & PCI_MSIX_FLAGS_BIRMASK; > > + vdev->msix->pba_offset = pba & ~PCI_MSIX_FLAGS_BIRMASK; > > + vdev->msix->entries = (ctrl & PCI_MSIX_FLAGS_QSIZE) + 1; > > + > > + DPRINTF("%04x:%02x:%02x.%x " > > + "PCI MSI-X CAP @0x%x, BAR %d, offset 0x%x, entries %d\n", > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function, pos, vdev->msix->table_bar, > > + vdev->msix->table_offset, vdev->msix->entries); > > + > > + return 0; > > +} > > + > > +static int vfio_setup_msix(VFIODevice *vdev, int pos) > > +{ > > + int ret; > > + > > + if (!msi_supported) { > > See above. Yep, noted. > > + return 0; > > + } > > + > > + ret = msix_init(&vdev->pdev, vdev->msix->entries, > > + &vdev->bars[vdev->msix->table_bar].mem, > > + vdev->msix->table_bar, vdev->msix->table_offset, > > + &vdev->bars[vdev->msix->pba_bar].mem, > > + vdev->msix->pba_bar, vdev->msix->pba_offset, pos); > > + if (ret < 0) { > > + error_report("vfio: msix_init failed\n"); > > + return ret; > > + } > > + > > + ret = msix_set_vector_notifiers(&vdev->pdev, vfio_msix_vector_use, > > + vfio_msix_vector_release); > > + if (ret) { > > + error_report("vfio: msix_set_vector_notifiers failed %d\n", ret); > > + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, > > + &vdev->bars[vdev->msix->pba_bar].mem); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static void vfio_teardown_msi(VFIODevice *vdev) > > +{ > > + msi_uninit(&vdev->pdev); > > + > > + if (vdev->msix) { > > + /* FIXME: Why can't unset just silently do nothing?? */ > > Yep, that would be better. New movie title: Attack of the Unnecessary Asserts ;) > > + if (vdev->pdev.msix_vector_use_notifier && > > + vdev->pdev.msix_vector_release_notifier) { > > + msix_unset_vector_notifiers(&vdev->pdev); > > + } > > + > > + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, > > + &vdev->bars[vdev->msix->pba_bar].mem); > > + } > > +} > > + > > +/* > > + * Resource setup > > + */ > > +static void vfio_unmap_bar(VFIODevice *vdev, int nr) > > +{ > > + VFIOBAR *bar = &vdev->bars[nr]; > > + > > + if (!bar->size) { > > + return; > > + } > > + > > + memory_region_del_subregion(&bar->mem, &bar->mmap_mem); > > + munmap(bar->mmap, memory_region_size(&bar->mmap_mem)); > > + > > + if (vdev->msix && vdev->msix->table_bar == nr) { > > + memory_region_del_subregion(&bar->mem, &vdev->msix->mmap_mem); > > + munmap(vdev->msix->mmap, memory_region_size(&vdev->msix->mmap_mem)); > > + } > > + > > + memory_region_destroy(&bar->mem); > > +} > > + > > +static int vfio_mmap_bar(VFIOBAR *bar, MemoryRegion *mem, MemoryRegion *submem, > > + void **map, size_t size, off_t offset, > > + const char *name) > > +{ > > + int ret = 0; > > + > > + if (size && bar->flags & VFIO_REGION_INFO_FLAG_MMAP) { > > + int prot = 0; > > + > > + if (bar->flags & VFIO_REGION_INFO_FLAG_READ) { > > + prot |= PROT_READ; > > + } > > + > > + if (bar->flags & VFIO_REGION_INFO_FLAG_WRITE) { > > + prot |= PROT_WRITE; > > + } > > + > > + *map = mmap(NULL, size, prot, MAP_SHARED, > > + bar->fd, bar->fd_offset + offset); > > + if (*map == MAP_FAILED) { > > + *map = NULL; > > + ret = -errno; > > + goto empty_region; > > + } > > + > > + memory_region_init_ram_ptr(submem, name, size, *map); > > + } else { > > +empty_region: > > + /* Create a zero sized sub-region to make cleanup easy. */ > > + memory_region_init(submem, name, 0); > > + } > > + > > + memory_region_add_subregion(mem, offset, submem); > > + > > + return ret; > > +} > > + > > +static void vfio_map_bar(VFIODevice *vdev, int nr) > > +{ > > + VFIOBAR *bar = &vdev->bars[nr]; > > + unsigned size = bar->size; > > + char name[64]; > > + uint32_t pci_bar; > > + uint8_t type; > > + int ret; > > + > > + /* Skip both unimplemented BARs and the upper half of 64bit BARS. */ > > + if (!size) { > > + return; > > + } > > + > > + snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d", > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function, nr); > > + > > + /* Determine what type of BAR this is for registration */ > > + ret = pread(vdev->fd, &pci_bar, sizeof(pci_bar), > > + vdev->config_offset + PCI_BASE_ADDRESS_0 + (4 * nr)); > > + if (ret != sizeof(pci_bar)) { > > + error_report("vfio: Failed to read BAR %d (%s)\n", nr, strerror(errno)); > > + return; > > + } > > + > > + pci_bar = le32_to_cpu(pci_bar); > > + type = pci_bar & (pci_bar & PCI_BASE_ADDRESS_SPACE_IO ? > > + ~PCI_BASE_ADDRESS_IO_MASK : ~PCI_BASE_ADDRESS_MEM_MASK); > > + > > + /* A "slow" read/write mapping underlies all BARs */ > > + memory_region_init_io(&bar->mem, &vfio_bar_ops, bar, name, size); > > + pci_register_bar(&vdev->pdev, nr, type, &bar->mem); > > + > > + /* > > + * We can't mmap areas overlapping the MSIX vector table, so we > > + * potentially insert a direct-mapped subregion before and after it. > > + */ > > + if (vdev->msix && vdev->msix->table_bar == nr) { > > + size = vdev->msix->table_offset & TARGET_PAGE_MASK; > > + } > > + > > + strncat(name, " mmap", sizeof(name) - strlen(name) - 1); > > This could generate an unterminated name if we actually have to cut the > appended string. You could set name[sizeof(name)-1] = 0. strncat adds the terminator, that's why we have the -1 so that there's space for it. strlen does not include the terminator. > > + if (vfio_mmap_bar(bar, &bar->mem, > > + &bar->mmap_mem, &bar->mmap, size, 0, name)) { > > + error_report("%s unsupported. Performance may be slow\n", name); > > + } > > + > > + if (vdev->msix && vdev->msix->table_bar == nr) { > > + unsigned start; > > + > > + start = TARGET_PAGE_ALIGN(vdev->msix->table_offset + > > + (vdev->msix->entries * PCI_MSIX_ENTRY_SIZE)); > > + > > + size = start < bar->size ? bar->size - start : 0; > > + strncat(name, " msix-hi", sizeof(name) - strlen(name) - 1); > > Same here. > > > + /* MSIXInfo contains another MemoryRegion for this mapping */ > > + if (vfio_mmap_bar(bar, &bar->mem, &vdev->msix->mmap_mem, > > + &vdev->msix->mmap, size, start, name)) { > > + error_report("%s unsupported. Performance may be slow\n", name); > > + } > > + } > > + > > + return; > > Unneeded return. Thanks. > > +} > > + > > ... > > > + > > +static int vfio_initfn(struct PCIDevice *pdev) > > +{ > > + VFIODevice *pvdev, *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > > + VFIOGroup *group; > > + char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name; > > + ssize_t len; > > + struct stat st; > > + int groupid; > > + int ret; > > + > > + /* Check that the host device exists */ > > + snprintf(path, sizeof(path), > > + "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/", > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function); > > + if (stat(path, &st) < 0) { > > + error_report("vfio: error: no such host device: %s", path); > > + return -1; > > + } > > + > > + strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1); > > See above for the termination problem. > > > + > > + len = readlink(path, iommu_group_path, PATH_MAX); > > + if (len <= 0) { > > + error_report("vfio: error no iommu_group for device\n"); > > + return -1; > > + } > > + > > + iommu_group_path[len] = 0; > > + group_name = basename(iommu_group_path); > > + > > + if (sscanf(group_name, "%d", &groupid) != 1) { > > + error_report("vfio: error reading %s: %s", path, strerror(errno)); > > + return -1; > > + } > > + > > + DPRINTF("%s(%04x:%02x:%02x.%x) group %d\n", __func__, vdev->host.domain, > > + vdev->host.bus, vdev->host.slot, vdev->host.function, groupid); > > + > > + group = vfio_get_group(groupid); > > + if (!group) { > > + error_report("vfio: failed to get group %d", groupid); > > + return -1; > > + } > > + > > + snprintf(path, sizeof(path), "%04x:%02x:%02x.%01x", > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function); > > + > > + QLIST_FOREACH(pvdev, &group->device_list, next) { > > + if (pvdev->host.domain == vdev->host.domain && > > + pvdev->host.bus == vdev->host.bus && > > + pvdev->host.slot == vdev->host.slot && > > + pvdev->host.function == vdev->host.function) { > > + > > + error_report("vfio: error: device %s is already attached\n", path); > > + vfio_put_group(group); > > + return -1; > > + } > > + } > > + > > + ret = vfio_get_device(group, path, vdev); > > + if (ret) { > > + error_report("vfio: failed to get device %s", path); > > + vfio_put_group(group); > > + return -1; > > + } > > + > > + /* Get a copy of config space */ > > + assert(pci_config_size(&vdev->pdev) <= vdev->config_size); > > + ret = pread(vdev->fd, vdev->pdev.config, > > + pci_config_size(&vdev->pdev), vdev->config_offset); > > + if (ret < (int)pci_config_size(&vdev->pdev)) { > > + error_report("vfio: Failed to read device config space\n"); > > + goto out_put; > > + } > > + > > + /* > > + * Clear host resource mapping info. If we choose not to register a > > + * BAR, such as might be the case with the option ROM, we can get > > + * confusing, unwritable, residual addresses from the host here. > > + */ > > + memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24); > > + memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4); > > + > > + vfio_load_rom(vdev); > > + > > + if (vfio_early_setup_msix(vdev)) { > > + goto out_put; > > + } > > + > > + vfio_map_bars(vdev); > > + > > + if (vfio_add_capabilities(vdev)) { > > + goto out_teardown; > > + } > > + > > + if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) { > > + pci_device_set_intx_routing_notifier(&vdev->pdev, vfio_update_irq); > > + } > > + > > + if (vfio_enable_intx(vdev)) { > > Although vfio_enable_intx also check for PCI_INTERRUPT_PIN, I would move > this under the test above - more consistent when reading the code. Sure, that makes sense. > > + goto out_teardown; > > + } > > + > > + return 0; > > + > > +out_teardown: > > + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); > > + vfio_teardown_msi(vdev); > > + vfio_unmap_bars(vdev); > > +out_put: > > + vfio_put_device(vdev); > > + vfio_put_group(group); > > + return -1; > > +} > > + > > +static void vfio_exitfn(struct PCIDevice *pdev) > > +{ > > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > > + VFIOGroup *group = vdev->group; > > + > > + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); > > + vfio_disable_interrupts(vdev); > > + vfio_teardown_msi(vdev); > > + vfio_unmap_bars(vdev); > > + vfio_put_device(vdev); > > + vfio_put_group(group); > > +} > > + > > +static void vfio_reset(DeviceState *dev) > > +{ > > + PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, dev); > > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > > + > > + if (!vdev->reset_works) { > > + return; > > + } > > + > > + if (ioctl(vdev->fd, VFIO_DEVICE_RESET)) { > > + error_report("vfio: Error unable to reset physical device " > > + "(%04x:%02x:%02x.%x): %s\n", vdev->host.domain, > > + vdev->host.bus, vdev->host.slot, vdev->host.function, > > + strerror(errno)); > > + } > > +} > > + > > +static Property vfio_pci_dev_properties[] = { > > + DEFINE_PROP_PCI_HOST_DEVADDR("host", VFIODevice, host), > > + /* > > + * TODO - support passed fds... is this necessary? > > + * DEFINE_PROP_STRING("vfiofd", VFIODevice, vfiofd_name), > > + * DEFINE_PROP_STRING("vfiogroupfd, VFIODevice, vfiogroupfd_name), > > + */ > > + DEFINE_PROP_END_OF_LIST(), > > +}; > > + > > + > > +static void vfio_pci_dev_class_init(ObjectClass *klass, void *data) > > +{ > > + PCIDeviceClass *dc = PCI_DEVICE_CLASS(klass); > > + > > + dc->parent_class.reset = vfio_reset; > > + dc->init = vfio_initfn; > > + dc->exit = vfio_exitfn; > > + dc->config_read = vfio_pci_read_config; > > + dc->config_write = vfio_pci_write_config; > > + dc->parent_class.props = vfio_pci_dev_properties; > > +} > > + > > +static TypeInfo vfio_pci_dev_info = { > > + .name = "vfio-pci", > > + .parent = TYPE_PCI_DEVICE, > > + .instance_size = sizeof(VFIODevice), > > + .class_init = vfio_pci_dev_class_init, > > +}; > > + > > +static void register_vfio_pci_dev_type(void) > > +{ > > + type_register_static(&vfio_pci_dev_info); > > +} > > + > > +type_init(register_vfio_pci_dev_type) > > diff --git a/hw/vfio_pci.h b/hw/vfio_pci.h > > new file mode 100644 > > index 0000000..0a71bce > > --- /dev/null > > +++ b/hw/vfio_pci.h > > @@ -0,0 +1,101 @@ > > +#ifndef HW_VFIO_PCI_H > > +#define HW_VFIO_PCI_H > > + > > +#include "qemu-common.h" > > +#include "qemu-queue.h" > > +#include "pci.h" > > +#include "event_notifier.h" > > + > > +typedef struct VFIOBAR { > > + off_t fd_offset; /* offset of BAR within device fd */ > > + int fd; /* device fd, allows us to pass VFIOBAR as opaque data */ > > + MemoryRegion mem; /* slow, read/write access */ > > + MemoryRegion mmap_mem; /* direct mapped access */ > > + void *mmap; > > + size_t size; > > + uint32_t flags; /* VFIO region flags (rd/wr/mmap) */ > > + uint8_t nr; /* cache the BAR number for debug */ > > +} VFIOBAR; > > + > > +typedef struct INTx { > > + bool pending; /* interrupt pending */ > > + bool kvm_accel; /* set when QEMU bypass through KVM enabled */ > > + uint8_t pin; /* which pin to pull for qemu_set_irq */ > > + EventNotifier interrupt; /* eventfd triggered on interrupt */ > > + EventNotifier unmask; /* eventfd for unmask on QEMU bypass */ > > + PCIINTxRoute route; /* routing info for QEMU bypass */ > > +} INTx; > > Please add a VFIO prefix. Ok > > + > > +struct VFIODevice; > > + > > +typedef struct MSIVector { > > + EventNotifier interrupt; /* eventfd triggered on interrupt */ > > + struct VFIODevice *vdev; /* back pointer to device */ > > + int vector; /* the vector number for this element */ > > Could also be calculated via vector - vector->vdev->msi_vectors. But I > don't mind. True, I'll add a note for now. > > + int virq; /* KVM irqchip route for QEMU bypass */ > > + bool use; > > +} MSIVector; > > Also here. Just in case we ever decide to introduce a generic structure > with this name. Yep > > + > > +enum { > > + INT_NONE = 0, > > + INT_INTx = 1, > > + INT_MSI = 2, > > + INT_MSIX = 3, > > +}; And these. > > + > > +struct VFIOGroup; > > + > > +typedef struct VFIOContainer { > > + int fd; /* /dev/vfio/vfio, empowered by the attached groups */ > > + struct { > > + /* enable abstraction to support various iommu backends */ > > + union { > > + MemoryListener listener; /* Used by type1 iommu */ > > + }; > > + void (*release)(struct VFIOContainer *); > > + } iommu_data; > > + QLIST_HEAD(, VFIOGroup) group_list; > > + QLIST_ENTRY(VFIOContainer) next; > > +} VFIOContainer; > > + > > +/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */ > > +typedef struct MSIXInfo { > > + uint8_t table_bar; > > + uint8_t pba_bar; > > + uint16_t entries; > > + uint32_t table_offset; > > + uint32_t pba_offset; > > + MemoryRegion mmap_mem; > > + void *mmap; > > +} MSIXInfo; > > Also a pretty generic name. Yep s/MSIXInfo/VFIOMSIXInfo/g/ > > + > > +typedef struct VFIODevice { > > + PCIDevice pdev; > > + int fd; > > + INTx intx; > > + unsigned int config_size; > > + off_t config_offset; /* Offset of config space region within device fd */ > > + unsigned int rom_size; > > + off_t rom_offset; /* Offset of ROM region within device fd */ > > + int msi_cap_size; > > + MSIVector *msi_vectors; > > + MSIXInfo *msix; > > + int nr_vectors; /* Number of MSI/MSIX vectors currently in use */ > > + int interrupt; /* Current interrupt type */ > > + VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */ > > + PCIHostDeviceAddress host; > > + QLIST_ENTRY(VFIODevice) next; > > + struct VFIOGroup *group; > > + bool reset_works; > > +} VFIODevice; > > + > > +typedef struct VFIOGroup { > > + int fd; > > + int groupid; > > + VFIOContainer *container; > > + QLIST_HEAD(, VFIODevice) device_list; > > + QLIST_ENTRY(VFIOGroup) next; > > + QLIST_ENTRY(VFIOGroup) container_next; > > +} VFIOGroup; > > + > > +#endif /* HW_VFIO_PCI_H */ > > > > Why do all theses structs have to go into a header file? Will there be > more users than vfio_pci.c? Only to avoid cluttering vfio_pci.c. Anthony suggested renaming this to vfio_pci_int.h (internal), which I've done. I wouldn't be opposed to rolling this into vfio_pci.c if that's the preference. Thanks for the review! Alex ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Qemu-devel] [PATCH v2 3/4] vfio: vfio-pci device assignment driver @ 2012-08-14 19:09 ` Alex Williamson 0 siblings, 0 replies; 16+ messages in thread From: Alex Williamson @ 2012-08-14 19:09 UTC (permalink / raw) To: Jan Kiszka Cc: aik@ozlabs.ru, aliguori@us.ibm.com, qemu-devel@nongnu.org, kvm@vger.kernel.org On Tue, 2012-08-14 at 19:40 +0200, Jan Kiszka wrote: > Just some comments, didn't look at all details. Thanks! I'll send out a v3 soon. I think that the off-by-one in strncat doesn't exist though, so would appreciate if you could double check. Individual comments below... > On 2012-08-02 21:17, Alex Williamson wrote: > > + > > +static int vfio_msix_vector_use(PCIDevice *pdev, > > + unsigned int vector, MSIMessage msg) > > +{ > > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > > + int ret, fd; > > + > > + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d used\n", __func__, > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function, vector); > > + > > + if (vdev->interrupt != INT_MSIX) { > > + vfio_disable_interrupts(vdev); > > + } > > + > > + if (!vdev->msi_vectors) { > > + vdev->msi_vectors = g_malloc0(vdev->msix->entries * sizeof(MSIVector)); > > + } > > + > > + vdev->msi_vectors[vector].vdev = vdev; > > + vdev->msi_vectors[vector].vector = vector; > > + vdev->msi_vectors[vector].use = true; > > + > > + msix_vector_use(pdev, vector); > > + > > + if (event_notifier_init(&vdev->msi_vectors[vector].interrupt, 0)) { > > + error_report("vfio: Error: event_notifier_init failed\n"); > > + } > > + > > + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); > > + > > + /* > > + * Attempt to enable route through KVM irqchip, > > + * default to userspace handling if unavailable. > > + */ > > + vdev->msi_vectors[vector].virq = kvm_irqchip_add_msi_route(kvm_state, msg); > > + if (vdev->msi_vectors[vector].virq < 0 || > > + kvm_irqchip_add_irqfd(kvm_state, fd, > > + vdev->msi_vectors[vector].virq) < 0) { > > If kvm_irqchip_add_irqfd fails, you have to drop the route and set virq > to -1. Otherwise, you won't match with the release logic below. Yep, good catch. > > + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, > > + &vdev->msi_vectors[vector]); > > + } > > + > > + /* > > + * We don't want to have the host allocate all possible MSI vectors > > + * for a device if they're not in use, so we shutdown and incrementally > > + * increase them as needed. > > + */ > > + if (vdev->nr_vectors < vector + 1) { > > + int i; > > + > > + vfio_disable_irqindex(vdev, VFIO_PCI_MSIX_IRQ_INDEX); > > + vdev->nr_vectors = vector + 1; > > + ret = vfio_enable_vectors(vdev, true); > > + if (ret) { > > + error_report("vfio: failed to enable vectors, %d\n", ret); > > + } > > + > > + /* We don't know if we've missed interrupts in the interim... */ > > + for (i = 0; i < vdev->msix->entries; i++) { > > + if (vdev->msi_vectors[i].use) { > > + msix_notify(&vdev->pdev, i); > > + } > > + } > > And it wasn't possible to provide an interface with VFIO that allows > vector addition/removal on the fly? KVM has an aweful one in this > regard, but that is legacy, VFIO is new. The above logic is a bit ugly IMHO. Linux doesn't allow it. VFIO has a VFIO_IRQ_INFO_NORESIZE attribute on MSI and MSI-X interrupts to expose this restriction and can be unset if Linux is updated to be more dynamic at some point. > > + } else { > > + struct vfio_irq_set_fd irq_set_fd = { > > + .irq_set = { > > + .argsz = sizeof(irq_set_fd), > > + .flags = VFIO_IRQ_SET_DATA_EVENTFD | > > + VFIO_IRQ_SET_ACTION_TRIGGER, > > + .index = VFIO_PCI_MSIX_IRQ_INDEX, > > + .start = vector, > > + .count = 1, > > + }, > > + .fd = fd, > > + }; > > + ret = ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); > > + if (ret) { > > + error_report("vfio: failed to modify vector, %d\n", ret); > > + } > > + msix_notify(&vdev->pdev, vector); > > That injection should no longer be needed once we bounce and record in > the PBA, right? Maybe add a comment for now. Right. Ok. > > + } > > + > > + return 0; > > +} > > + > > +static void vfio_msix_vector_release(PCIDevice *pdev, unsigned int vector) > > +{ > > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > > + struct vfio_irq_set_fd irq_set_fd = { > > + .irq_set = { > > + .argsz = sizeof(irq_set_fd), > > + .flags = VFIO_IRQ_SET_DATA_EVENTFD | > > + VFIO_IRQ_SET_ACTION_TRIGGER, > > + .index = VFIO_PCI_MSIX_IRQ_INDEX, > > + .start = vector, > > + .count = 1, > > + }, > > + .fd = -1, > > + }; > > + int fd; > > + > > + DPRINTF("%s(%04x:%02x:%02x.%x) vector %d released\n", __func__, > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function, vector); > > + > > + /* > > + * XXX What's the right thing to do here? This turns off the interrupt > > + * completely, but do we really just want to switch the interrupt to > > + * bouncing through userspace and let msix.c drop it? Not sure. > > + */ > > + msix_vector_unuse(pdev, vector); > > + ioctl(vdev->fd, VFIO_DEVICE_SET_IRQS, &irq_set_fd); > > + > > + fd = event_notifier_get_fd(&vdev->msi_vectors[vector].interrupt); > > + > > + if (vdev->msi_vectors[vector].virq < 0) { > > + qemu_set_fd_handler(fd, NULL, NULL, NULL); > > + } else { > > + kvm_irqchip_remove_irqfd(kvm_state, fd, vdev->msi_vectors[vector].virq); > > + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[vector].virq); > > + vdev->msi_vectors[vector].virq = -1; > > + } > > + > > + event_notifier_cleanup(&vdev->msi_vectors[vector].interrupt); > > + vdev->msi_vectors[vector].use = false; > > +} > > + > > +/* XXX This should move to msi.c */ > > Nope. We rather need notifier support for MSI. I only have an outdated > patch at hand. Yes, MSI needs some of the same interface upgrades as MSI-X has. This is just a bootstrap for now. > > +static MSIMessage msi_get_msg(PCIDevice *pdev, unsigned int vector) > > +{ > > + uint16_t flags = pci_get_word(pdev->config + pdev->msi_cap + PCI_MSI_FLAGS); > > + bool msi64bit = flags & PCI_MSI_FLAGS_64BIT; > > + MSIMessage msg; > > + > > + if (msi64bit) { > > + msg.address = pci_get_quad(pdev->config + > > + pdev->msi_cap + PCI_MSI_ADDRESS_LO); > > + } else { > > + msg.address = pci_get_long(pdev->config + > > + pdev->msi_cap + PCI_MSI_ADDRESS_LO); > > + } > > + > > + msg.data = pci_get_word(pdev->config + pdev->msi_cap + > > + (msi64bit ? PCI_MSI_DATA_64 : PCI_MSI_DATA_32)); > > + msg.data += vector; > > + > > + return msg; > > +} > > + > > +/* So should this */ > > +static void msi_set_qsize(PCIDevice *pdev, uint8_t size) > > +{ > > + uint8_t *config = pdev->config + pdev->msi_cap; > > + uint16_t flags; > > + > > + flags = pci_get_word(config + PCI_MSI_FLAGS); > > + flags = le16_to_cpu(flags); > > + flags &= ~PCI_MSI_FLAGS_QSIZE; > > + flags |= (size & 0x7) << 4; > > + flags = cpu_to_le16(flags); > > + pci_set_word(config + PCI_MSI_FLAGS, flags); > > Hmm... > > > +} > > + > > +static void vfio_enable_msi(VFIODevice *vdev) > > +{ > > + int ret, i; > > + > > + vfio_disable_interrupts(vdev); > > + > > + vdev->nr_vectors = msi_nr_vectors_allocated(&vdev->pdev); > > +retry: > > + vdev->msi_vectors = g_malloc0(vdev->nr_vectors * sizeof(MSIVector)); > > + > > + for (i = 0; i < vdev->nr_vectors; i++) { > > + MSIMessage msg; > > + int fd; > > + > > + vdev->msi_vectors[i].vdev = vdev; > > + vdev->msi_vectors[i].vector = i; > > + vdev->msi_vectors[i].use = true; > > + > > + if (event_notifier_init(&vdev->msi_vectors[i].interrupt, 0)) { > > + error_report("vfio: Error: event_notifier_init failed\n"); > > + } > > + > > + fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); > > + > > + msg = msi_get_msg(&vdev->pdev, i); > > + > > + /* > > + * Attempt to enable route through KVM irqchip, > > + * default to userspace handling if unavailable. > > + */ > > + vdev->msi_vectors[i].virq = kvm_irqchip_add_msi_route(kvm_state, msg); > > + if (vdev->msi_vectors[i].virq < 0 || > > + kvm_irqchip_add_irqfd(kvm_state, fd, > > + vdev->msi_vectors[i].virq) < 0) { > > + qemu_set_fd_handler(fd, vfio_msi_interrupt, NULL, > > + &vdev->msi_vectors[i]); > > + } > > + } > > + > > + ret = vfio_enable_vectors(vdev, false); > > + if (ret) { > > + if (ret < 0) { > > + error_report("vfio: Error: Failed to setup MSI fds: %s\n", > > + strerror(errno)); > > + } else if (ret != vdev->nr_vectors) { > > + error_report("vfio: Error: Failed to enable %d " > > + "MSI vectors, retry with %d\n", vdev->nr_vectors, ret); > > + } > > + > > + for (i = 0; i < vdev->nr_vectors; i++) { > > + int fd = event_notifier_get_fd(&vdev->msi_vectors[i].interrupt); > > + if (vdev->msi_vectors[i].virq >= 0) { > > + kvm_irqchip_remove_irqfd(kvm_state, fd, > > + vdev->msi_vectors[i].virq); > > + kvm_irqchip_release_virq(kvm_state, vdev->msi_vectors[i].virq); > > + vdev->msi_vectors[i].virq = -1; > > + } else { > > + qemu_set_fd_handler(fd, NULL, NULL, NULL); > > + } > > + event_notifier_cleanup(&vdev->msi_vectors[i].interrupt); > > + } > > + > > + g_free(vdev->msi_vectors); > > + > > + if (ret > 0 && ret != vdev->nr_vectors) { > > + vdev->nr_vectors = ret; > > + goto retry; > > + } > > + vdev->nr_vectors = 0; > > + > > + return; > > + } > > + > > + msi_set_qsize(&vdev->pdev, vdev->nr_vectors); > > Hmmm... Can we really patch qsize? While the guest is already running > and possibly evaluated this field before? IOW: Does the spec allow it to > be changed by the device and, if yes, in which states? This is really wishful thinking on my part, I haven't proven that it does anything or that anyone ever resamples it. It's probably reasonable to have VFIO report that only a single vector is available (at least on and x86 host) so we could lie in qmask. As you know, our failure options are pretty limited for enabling either MSI or MSI-X, but we also don't want to sit on a pile of vectors in the host. > > + > > + DPRINTF("%s(%04x:%02x:%02x.%x) Enabled %d MSI vectors\n", __func__, > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function, vdev->nr_vectors); > > +} > > + > > ... > > > + > > +static int vfio_setup_msi(VFIODevice *vdev, int pos) > > +{ > > + uint16_t ctrl; > > + bool msi_64bit, msi_maskbit; > > + int ret, entries; > > + > > + if (!msi_supported) { > > Not critical, but I would prefer to keep this variable in the context of > the MSI core. msi_init will return ENOTSUP, and you could handle that > gracefully. Ok, I'll add a TODO to remove it. > > + return 0; > > + } > > + > > + if (pread(vdev->fd, &ctrl, sizeof(ctrl), > > + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { > > + return -1; > > + } > > + ctrl = le16_to_cpu(ctrl); > > + > > + msi_64bit = !!(ctrl & PCI_MSI_FLAGS_64BIT); > > + msi_maskbit = !!(ctrl & PCI_MSI_FLAGS_MASKBIT); > > + entries = 1 << ((ctrl & PCI_MSI_FLAGS_QMASK) >> 1); > > + > > + DPRINTF("%04x:%02x:%02x.%x PCI MSI CAP @0x%x\n", vdev->host.domain, > > + vdev->host.bus, vdev->host.slot, vdev->host.function, pos); > > + > > + ret = msi_init(&vdev->pdev, pos, entries, msi_64bit, msi_maskbit); > > + if (ret < 0) { > > + error_report("vfio: msi_init failed\n"); > > + return ret; > > + } > > + vdev->msi_cap_size = 0xa + (msi_maskbit ? 0xa : 0) + (msi_64bit ? 0x4 : 0); > > + > > + return 0; > > +} > > + > > +/* > > + * We don't have any control over how pci_add_capability() inserts > > + * capabilities into the chain. > > What control is missing precisely? Can pci_add_capability be improved to > simplify the early setup? I don't see it (msix_init requires the > parameters), but the comment suggests this somehow. Capabilities are a linked list and pci_add_capability always inserts at the head of the list. msix_init and msi_init want to call pci_add_capability as part of their setup, that means to get a capability list to match as close as possible to hardware (same capability offsets and ordering), we have to walk to the end of the chain on the physical device and add each to the virtual config space, calling msi_init and msix_init at the right points along the way. This leads to vfio_add_std_cap being a recursive function to handle this. > > In order to setup MSI-X we need a > > + * MemoryRegion for the BAR. In order to setup the BAR and not > > + * attempt to mmap the MSI-X table area, which VFIO won't allow, we > > + * need to first look for where the MSI-X table lives. So we > > + * unfortunately split MSI-X setup across two functions. > > + */ > > +static int vfio_early_setup_msix(VFIODevice *vdev) > > +{ > > + uint8_t pos; > > + uint16_t ctrl; > > + uint32_t table, pba; > > + > > + pos = pci_find_capability(&vdev->pdev, PCI_CAP_ID_MSIX); > > + if (!pos) { > > + return 0; > > + } > > + > > + if (pread(vdev->fd, &ctrl, sizeof(ctrl), > > + vdev->config_offset + pos + PCI_CAP_FLAGS) != sizeof(ctrl)) { > > + return -1; > > + } > > + > > + if (pread(vdev->fd, &table, sizeof(table), > > + vdev->config_offset + pos + PCI_MSIX_TABLE) != sizeof(table)) { > > + return -1; > > + } > > + > > + if (pread(vdev->fd, &pba, sizeof(pba), > > + vdev->config_offset + pos + PCI_MSIX_PBA) != sizeof(pba)) { > > + return -1; > > + } > > + > > + ctrl = le16_to_cpu(ctrl); > > + table = le32_to_cpu(table); > > + pba = le32_to_cpu(pba); > > + > > + vdev->msix = g_malloc0(sizeof(*(vdev->msix))); > > + vdev->msix->table_bar = table & PCI_MSIX_FLAGS_BIRMASK; > > + vdev->msix->table_offset = table & ~PCI_MSIX_FLAGS_BIRMASK; > > + vdev->msix->pba_bar = pba & PCI_MSIX_FLAGS_BIRMASK; > > + vdev->msix->pba_offset = pba & ~PCI_MSIX_FLAGS_BIRMASK; > > + vdev->msix->entries = (ctrl & PCI_MSIX_FLAGS_QSIZE) + 1; > > + > > + DPRINTF("%04x:%02x:%02x.%x " > > + "PCI MSI-X CAP @0x%x, BAR %d, offset 0x%x, entries %d\n", > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function, pos, vdev->msix->table_bar, > > + vdev->msix->table_offset, vdev->msix->entries); > > + > > + return 0; > > +} > > + > > +static int vfio_setup_msix(VFIODevice *vdev, int pos) > > +{ > > + int ret; > > + > > + if (!msi_supported) { > > See above. Yep, noted. > > + return 0; > > + } > > + > > + ret = msix_init(&vdev->pdev, vdev->msix->entries, > > + &vdev->bars[vdev->msix->table_bar].mem, > > + vdev->msix->table_bar, vdev->msix->table_offset, > > + &vdev->bars[vdev->msix->pba_bar].mem, > > + vdev->msix->pba_bar, vdev->msix->pba_offset, pos); > > + if (ret < 0) { > > + error_report("vfio: msix_init failed\n"); > > + return ret; > > + } > > + > > + ret = msix_set_vector_notifiers(&vdev->pdev, vfio_msix_vector_use, > > + vfio_msix_vector_release); > > + if (ret) { > > + error_report("vfio: msix_set_vector_notifiers failed %d\n", ret); > > + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, > > + &vdev->bars[vdev->msix->pba_bar].mem); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static void vfio_teardown_msi(VFIODevice *vdev) > > +{ > > + msi_uninit(&vdev->pdev); > > + > > + if (vdev->msix) { > > + /* FIXME: Why can't unset just silently do nothing?? */ > > Yep, that would be better. New movie title: Attack of the Unnecessary Asserts ;) > > + if (vdev->pdev.msix_vector_use_notifier && > > + vdev->pdev.msix_vector_release_notifier) { > > + msix_unset_vector_notifiers(&vdev->pdev); > > + } > > + > > + msix_uninit(&vdev->pdev, &vdev->bars[vdev->msix->table_bar].mem, > > + &vdev->bars[vdev->msix->pba_bar].mem); > > + } > > +} > > + > > +/* > > + * Resource setup > > + */ > > +static void vfio_unmap_bar(VFIODevice *vdev, int nr) > > +{ > > + VFIOBAR *bar = &vdev->bars[nr]; > > + > > + if (!bar->size) { > > + return; > > + } > > + > > + memory_region_del_subregion(&bar->mem, &bar->mmap_mem); > > + munmap(bar->mmap, memory_region_size(&bar->mmap_mem)); > > + > > + if (vdev->msix && vdev->msix->table_bar == nr) { > > + memory_region_del_subregion(&bar->mem, &vdev->msix->mmap_mem); > > + munmap(vdev->msix->mmap, memory_region_size(&vdev->msix->mmap_mem)); > > + } > > + > > + memory_region_destroy(&bar->mem); > > +} > > + > > +static int vfio_mmap_bar(VFIOBAR *bar, MemoryRegion *mem, MemoryRegion *submem, > > + void **map, size_t size, off_t offset, > > + const char *name) > > +{ > > + int ret = 0; > > + > > + if (size && bar->flags & VFIO_REGION_INFO_FLAG_MMAP) { > > + int prot = 0; > > + > > + if (bar->flags & VFIO_REGION_INFO_FLAG_READ) { > > + prot |= PROT_READ; > > + } > > + > > + if (bar->flags & VFIO_REGION_INFO_FLAG_WRITE) { > > + prot |= PROT_WRITE; > > + } > > + > > + *map = mmap(NULL, size, prot, MAP_SHARED, > > + bar->fd, bar->fd_offset + offset); > > + if (*map == MAP_FAILED) { > > + *map = NULL; > > + ret = -errno; > > + goto empty_region; > > + } > > + > > + memory_region_init_ram_ptr(submem, name, size, *map); > > + } else { > > +empty_region: > > + /* Create a zero sized sub-region to make cleanup easy. */ > > + memory_region_init(submem, name, 0); > > + } > > + > > + memory_region_add_subregion(mem, offset, submem); > > + > > + return ret; > > +} > > + > > +static void vfio_map_bar(VFIODevice *vdev, int nr) > > +{ > > + VFIOBAR *bar = &vdev->bars[nr]; > > + unsigned size = bar->size; > > + char name[64]; > > + uint32_t pci_bar; > > + uint8_t type; > > + int ret; > > + > > + /* Skip both unimplemented BARs and the upper half of 64bit BARS. */ > > + if (!size) { > > + return; > > + } > > + > > + snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d", > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function, nr); > > + > > + /* Determine what type of BAR this is for registration */ > > + ret = pread(vdev->fd, &pci_bar, sizeof(pci_bar), > > + vdev->config_offset + PCI_BASE_ADDRESS_0 + (4 * nr)); > > + if (ret != sizeof(pci_bar)) { > > + error_report("vfio: Failed to read BAR %d (%s)\n", nr, strerror(errno)); > > + return; > > + } > > + > > + pci_bar = le32_to_cpu(pci_bar); > > + type = pci_bar & (pci_bar & PCI_BASE_ADDRESS_SPACE_IO ? > > + ~PCI_BASE_ADDRESS_IO_MASK : ~PCI_BASE_ADDRESS_MEM_MASK); > > + > > + /* A "slow" read/write mapping underlies all BARs */ > > + memory_region_init_io(&bar->mem, &vfio_bar_ops, bar, name, size); > > + pci_register_bar(&vdev->pdev, nr, type, &bar->mem); > > + > > + /* > > + * We can't mmap areas overlapping the MSIX vector table, so we > > + * potentially insert a direct-mapped subregion before and after it. > > + */ > > + if (vdev->msix && vdev->msix->table_bar == nr) { > > + size = vdev->msix->table_offset & TARGET_PAGE_MASK; > > + } > > + > > + strncat(name, " mmap", sizeof(name) - strlen(name) - 1); > > This could generate an unterminated name if we actually have to cut the > appended string. You could set name[sizeof(name)-1] = 0. strncat adds the terminator, that's why we have the -1 so that there's space for it. strlen does not include the terminator. > > + if (vfio_mmap_bar(bar, &bar->mem, > > + &bar->mmap_mem, &bar->mmap, size, 0, name)) { > > + error_report("%s unsupported. Performance may be slow\n", name); > > + } > > + > > + if (vdev->msix && vdev->msix->table_bar == nr) { > > + unsigned start; > > + > > + start = TARGET_PAGE_ALIGN(vdev->msix->table_offset + > > + (vdev->msix->entries * PCI_MSIX_ENTRY_SIZE)); > > + > > + size = start < bar->size ? bar->size - start : 0; > > + strncat(name, " msix-hi", sizeof(name) - strlen(name) - 1); > > Same here. > > > + /* MSIXInfo contains another MemoryRegion for this mapping */ > > + if (vfio_mmap_bar(bar, &bar->mem, &vdev->msix->mmap_mem, > > + &vdev->msix->mmap, size, start, name)) { > > + error_report("%s unsupported. Performance may be slow\n", name); > > + } > > + } > > + > > + return; > > Unneeded return. Thanks. > > +} > > + > > ... > > > + > > +static int vfio_initfn(struct PCIDevice *pdev) > > +{ > > + VFIODevice *pvdev, *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > > + VFIOGroup *group; > > + char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name; > > + ssize_t len; > > + struct stat st; > > + int groupid; > > + int ret; > > + > > + /* Check that the host device exists */ > > + snprintf(path, sizeof(path), > > + "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/", > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function); > > + if (stat(path, &st) < 0) { > > + error_report("vfio: error: no such host device: %s", path); > > + return -1; > > + } > > + > > + strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1); > > See above for the termination problem. > > > + > > + len = readlink(path, iommu_group_path, PATH_MAX); > > + if (len <= 0) { > > + error_report("vfio: error no iommu_group for device\n"); > > + return -1; > > + } > > + > > + iommu_group_path[len] = 0; > > + group_name = basename(iommu_group_path); > > + > > + if (sscanf(group_name, "%d", &groupid) != 1) { > > + error_report("vfio: error reading %s: %s", path, strerror(errno)); > > + return -1; > > + } > > + > > + DPRINTF("%s(%04x:%02x:%02x.%x) group %d\n", __func__, vdev->host.domain, > > + vdev->host.bus, vdev->host.slot, vdev->host.function, groupid); > > + > > + group = vfio_get_group(groupid); > > + if (!group) { > > + error_report("vfio: failed to get group %d", groupid); > > + return -1; > > + } > > + > > + snprintf(path, sizeof(path), "%04x:%02x:%02x.%01x", > > + vdev->host.domain, vdev->host.bus, vdev->host.slot, > > + vdev->host.function); > > + > > + QLIST_FOREACH(pvdev, &group->device_list, next) { > > + if (pvdev->host.domain == vdev->host.domain && > > + pvdev->host.bus == vdev->host.bus && > > + pvdev->host.slot == vdev->host.slot && > > + pvdev->host.function == vdev->host.function) { > > + > > + error_report("vfio: error: device %s is already attached\n", path); > > + vfio_put_group(group); > > + return -1; > > + } > > + } > > + > > + ret = vfio_get_device(group, path, vdev); > > + if (ret) { > > + error_report("vfio: failed to get device %s", path); > > + vfio_put_group(group); > > + return -1; > > + } > > + > > + /* Get a copy of config space */ > > + assert(pci_config_size(&vdev->pdev) <= vdev->config_size); > > + ret = pread(vdev->fd, vdev->pdev.config, > > + pci_config_size(&vdev->pdev), vdev->config_offset); > > + if (ret < (int)pci_config_size(&vdev->pdev)) { > > + error_report("vfio: Failed to read device config space\n"); > > + goto out_put; > > + } > > + > > + /* > > + * Clear host resource mapping info. If we choose not to register a > > + * BAR, such as might be the case with the option ROM, we can get > > + * confusing, unwritable, residual addresses from the host here. > > + */ > > + memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24); > > + memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4); > > + > > + vfio_load_rom(vdev); > > + > > + if (vfio_early_setup_msix(vdev)) { > > + goto out_put; > > + } > > + > > + vfio_map_bars(vdev); > > + > > + if (vfio_add_capabilities(vdev)) { > > + goto out_teardown; > > + } > > + > > + if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) { > > + pci_device_set_intx_routing_notifier(&vdev->pdev, vfio_update_irq); > > + } > > + > > + if (vfio_enable_intx(vdev)) { > > Although vfio_enable_intx also check for PCI_INTERRUPT_PIN, I would move > this under the test above - more consistent when reading the code. Sure, that makes sense. > > + goto out_teardown; > > + } > > + > > + return 0; > > + > > +out_teardown: > > + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); > > + vfio_teardown_msi(vdev); > > + vfio_unmap_bars(vdev); > > +out_put: > > + vfio_put_device(vdev); > > + vfio_put_group(group); > > + return -1; > > +} > > + > > +static void vfio_exitfn(struct PCIDevice *pdev) > > +{ > > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > > + VFIOGroup *group = vdev->group; > > + > > + pci_device_set_intx_routing_notifier(&vdev->pdev, NULL); > > + vfio_disable_interrupts(vdev); > > + vfio_teardown_msi(vdev); > > + vfio_unmap_bars(vdev); > > + vfio_put_device(vdev); > > + vfio_put_group(group); > > +} > > + > > +static void vfio_reset(DeviceState *dev) > > +{ > > + PCIDevice *pdev = DO_UPCAST(PCIDevice, qdev, dev); > > + VFIODevice *vdev = DO_UPCAST(VFIODevice, pdev, pdev); > > + > > + if (!vdev->reset_works) { > > + return; > > + } > > + > > + if (ioctl(vdev->fd, VFIO_DEVICE_RESET)) { > > + error_report("vfio: Error unable to reset physical device " > > + "(%04x:%02x:%02x.%x): %s\n", vdev->host.domain, > > + vdev->host.bus, vdev->host.slot, vdev->host.function, > > + strerror(errno)); > > + } > > +} > > + > > +static Property vfio_pci_dev_properties[] = { > > + DEFINE_PROP_PCI_HOST_DEVADDR("host", VFIODevice, host), > > + /* > > + * TODO - support passed fds... is this necessary? > > + * DEFINE_PROP_STRING("vfiofd", VFIODevice, vfiofd_name), > > + * DEFINE_PROP_STRING("vfiogroupfd, VFIODevice, vfiogroupfd_name), > > + */ > > + DEFINE_PROP_END_OF_LIST(), > > +}; > > + > > + > > +static void vfio_pci_dev_class_init(ObjectClass *klass, void *data) > > +{ > > + PCIDeviceClass *dc = PCI_DEVICE_CLASS(klass); > > + > > + dc->parent_class.reset = vfio_reset; > > + dc->init = vfio_initfn; > > + dc->exit = vfio_exitfn; > > + dc->config_read = vfio_pci_read_config; > > + dc->config_write = vfio_pci_write_config; > > + dc->parent_class.props = vfio_pci_dev_properties; > > +} > > + > > +static TypeInfo vfio_pci_dev_info = { > > + .name = "vfio-pci", > > + .parent = TYPE_PCI_DEVICE, > > + .instance_size = sizeof(VFIODevice), > > + .class_init = vfio_pci_dev_class_init, > > +}; > > + > > +static void register_vfio_pci_dev_type(void) > > +{ > > + type_register_static(&vfio_pci_dev_info); > > +} > > + > > +type_init(register_vfio_pci_dev_type) > > diff --git a/hw/vfio_pci.h b/hw/vfio_pci.h > > new file mode 100644 > > index 0000000..0a71bce > > --- /dev/null > > +++ b/hw/vfio_pci.h > > @@ -0,0 +1,101 @@ > > +#ifndef HW_VFIO_PCI_H > > +#define HW_VFIO_PCI_H > > + > > +#include "qemu-common.h" > > +#include "qemu-queue.h" > > +#include "pci.h" > > +#include "event_notifier.h" > > + > > +typedef struct VFIOBAR { > > + off_t fd_offset; /* offset of BAR within device fd */ > > + int fd; /* device fd, allows us to pass VFIOBAR as opaque data */ > > + MemoryRegion mem; /* slow, read/write access */ > > + MemoryRegion mmap_mem; /* direct mapped access */ > > + void *mmap; > > + size_t size; > > + uint32_t flags; /* VFIO region flags (rd/wr/mmap) */ > > + uint8_t nr; /* cache the BAR number for debug */ > > +} VFIOBAR; > > + > > +typedef struct INTx { > > + bool pending; /* interrupt pending */ > > + bool kvm_accel; /* set when QEMU bypass through KVM enabled */ > > + uint8_t pin; /* which pin to pull for qemu_set_irq */ > > + EventNotifier interrupt; /* eventfd triggered on interrupt */ > > + EventNotifier unmask; /* eventfd for unmask on QEMU bypass */ > > + PCIINTxRoute route; /* routing info for QEMU bypass */ > > +} INTx; > > Please add a VFIO prefix. Ok > > + > > +struct VFIODevice; > > + > > +typedef struct MSIVector { > > + EventNotifier interrupt; /* eventfd triggered on interrupt */ > > + struct VFIODevice *vdev; /* back pointer to device */ > > + int vector; /* the vector number for this element */ > > Could also be calculated via vector - vector->vdev->msi_vectors. But I > don't mind. True, I'll add a note for now. > > + int virq; /* KVM irqchip route for QEMU bypass */ > > + bool use; > > +} MSIVector; > > Also here. Just in case we ever decide to introduce a generic structure > with this name. Yep > > + > > +enum { > > + INT_NONE = 0, > > + INT_INTx = 1, > > + INT_MSI = 2, > > + INT_MSIX = 3, > > +}; And these. > > + > > +struct VFIOGroup; > > + > > +typedef struct VFIOContainer { > > + int fd; /* /dev/vfio/vfio, empowered by the attached groups */ > > + struct { > > + /* enable abstraction to support various iommu backends */ > > + union { > > + MemoryListener listener; /* Used by type1 iommu */ > > + }; > > + void (*release)(struct VFIOContainer *); > > + } iommu_data; > > + QLIST_HEAD(, VFIOGroup) group_list; > > + QLIST_ENTRY(VFIOContainer) next; > > +} VFIOContainer; > > + > > +/* Cache of MSI-X setup plus extra mmap and memory region for split BAR map */ > > +typedef struct MSIXInfo { > > + uint8_t table_bar; > > + uint8_t pba_bar; > > + uint16_t entries; > > + uint32_t table_offset; > > + uint32_t pba_offset; > > + MemoryRegion mmap_mem; > > + void *mmap; > > +} MSIXInfo; > > Also a pretty generic name. Yep s/MSIXInfo/VFIOMSIXInfo/g/ > > + > > +typedef struct VFIODevice { > > + PCIDevice pdev; > > + int fd; > > + INTx intx; > > + unsigned int config_size; > > + off_t config_offset; /* Offset of config space region within device fd */ > > + unsigned int rom_size; > > + off_t rom_offset; /* Offset of ROM region within device fd */ > > + int msi_cap_size; > > + MSIVector *msi_vectors; > > + MSIXInfo *msix; > > + int nr_vectors; /* Number of MSI/MSIX vectors currently in use */ > > + int interrupt; /* Current interrupt type */ > > + VFIOBAR bars[PCI_NUM_REGIONS - 1]; /* No ROM */ > > + PCIHostDeviceAddress host; > > + QLIST_ENTRY(VFIODevice) next; > > + struct VFIOGroup *group; > > + bool reset_works; > > +} VFIODevice; > > + > > +typedef struct VFIOGroup { > > + int fd; > > + int groupid; > > + VFIOContainer *container; > > + QLIST_HEAD(, VFIODevice) device_list; > > + QLIST_ENTRY(VFIOGroup) next; > > + QLIST_ENTRY(VFIOGroup) container_next; > > +} VFIOGroup; > > + > > +#endif /* HW_VFIO_PCI_H */ > > > > Why do all theses structs have to go into a header file? Will there be > more users than vfio_pci.c? Only to avoid cluttering vfio_pci.c. Anthony suggested renaming this to vfio_pci_int.h (internal), which I've done. I wouldn't be opposed to rolling this into vfio_pci.c if that's the preference. Thanks for the review! Alex ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v2 3/4] vfio: vfio-pci device assignment driver 2012-08-14 19:09 ` [Qemu-devel] " Alex Williamson @ 2012-08-14 20:33 ` Jan Kiszka -1 siblings, 0 replies; 16+ messages in thread From: Jan Kiszka @ 2012-08-14 20:33 UTC (permalink / raw) To: Alex Williamson Cc: aliguori@us.ibm.com, qemu-devel@nongnu.org, kvm@vger.kernel.org, aik@ozlabs.ru On 2012-08-14 21:09, Alex Williamson wrote: >>> +static void vfio_map_bar(VFIODevice *vdev, int nr) >>> +{ >>> + VFIOBAR *bar = &vdev->bars[nr]; >>> + unsigned size = bar->size; >>> + char name[64]; >>> + uint32_t pci_bar; >>> + uint8_t type; >>> + int ret; >>> + >>> + /* Skip both unimplemented BARs and the upper half of 64bit BARS. */ >>> + if (!size) { >>> + return; >>> + } >>> + >>> + snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d", >>> + vdev->host.domain, vdev->host.bus, vdev->host.slot, >>> + vdev->host.function, nr); >>> + >>> + /* Determine what type of BAR this is for registration */ >>> + ret = pread(vdev->fd, &pci_bar, sizeof(pci_bar), >>> + vdev->config_offset + PCI_BASE_ADDRESS_0 + (4 * nr)); >>> + if (ret != sizeof(pci_bar)) { >>> + error_report("vfio: Failed to read BAR %d (%s)\n", nr, strerror(errno)); >>> + return; >>> + } >>> + >>> + pci_bar = le32_to_cpu(pci_bar); >>> + type = pci_bar & (pci_bar & PCI_BASE_ADDRESS_SPACE_IO ? >>> + ~PCI_BASE_ADDRESS_IO_MASK : ~PCI_BASE_ADDRESS_MEM_MASK); >>> + >>> + /* A "slow" read/write mapping underlies all BARs */ >>> + memory_region_init_io(&bar->mem, &vfio_bar_ops, bar, name, size); >>> + pci_register_bar(&vdev->pdev, nr, type, &bar->mem); >>> + >>> + /* >>> + * We can't mmap areas overlapping the MSIX vector table, so we >>> + * potentially insert a direct-mapped subregion before and after it. >>> + */ >>> + if (vdev->msix && vdev->msix->table_bar == nr) { >>> + size = vdev->msix->table_offset & TARGET_PAGE_MASK; >>> + } >>> + >>> + strncat(name, " mmap", sizeof(name) - strlen(name) - 1); >> >> This could generate an unterminated name if we actually have to cut the >> appended string. You could set name[sizeof(name)-1] = 0. > > strncat adds the terminator, that's why we have the -1 so that there's > space for it. strlen does not include the terminator. Yep, you are right, forget what I said. Jan -- Siemens AG, Corporate Technology, CT RTC ITP SDP-DE Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [Qemu-devel] [PATCH v2 3/4] vfio: vfio-pci device assignment driver @ 2012-08-14 20:33 ` Jan Kiszka 0 siblings, 0 replies; 16+ messages in thread From: Jan Kiszka @ 2012-08-14 20:33 UTC (permalink / raw) To: Alex Williamson Cc: aik@ozlabs.ru, aliguori@us.ibm.com, qemu-devel@nongnu.org, kvm@vger.kernel.org On 2012-08-14 21:09, Alex Williamson wrote: >>> +static void vfio_map_bar(VFIODevice *vdev, int nr) >>> +{ >>> + VFIOBAR *bar = &vdev->bars[nr]; >>> + unsigned size = bar->size; >>> + char name[64]; >>> + uint32_t pci_bar; >>> + uint8_t type; >>> + int ret; >>> + >>> + /* Skip both unimplemented BARs and the upper half of 64bit BARS. */ >>> + if (!size) { >>> + return; >>> + } >>> + >>> + snprintf(name, sizeof(name), "VFIO %04x:%02x:%02x.%x BAR %d", >>> + vdev->host.domain, vdev->host.bus, vdev->host.slot, >>> + vdev->host.function, nr); >>> + >>> + /* Determine what type of BAR this is for registration */ >>> + ret = pread(vdev->fd, &pci_bar, sizeof(pci_bar), >>> + vdev->config_offset + PCI_BASE_ADDRESS_0 + (4 * nr)); >>> + if (ret != sizeof(pci_bar)) { >>> + error_report("vfio: Failed to read BAR %d (%s)\n", nr, strerror(errno)); >>> + return; >>> + } >>> + >>> + pci_bar = le32_to_cpu(pci_bar); >>> + type = pci_bar & (pci_bar & PCI_BASE_ADDRESS_SPACE_IO ? >>> + ~PCI_BASE_ADDRESS_IO_MASK : ~PCI_BASE_ADDRESS_MEM_MASK); >>> + >>> + /* A "slow" read/write mapping underlies all BARs */ >>> + memory_region_init_io(&bar->mem, &vfio_bar_ops, bar, name, size); >>> + pci_register_bar(&vdev->pdev, nr, type, &bar->mem); >>> + >>> + /* >>> + * We can't mmap areas overlapping the MSIX vector table, so we >>> + * potentially insert a direct-mapped subregion before and after it. >>> + */ >>> + if (vdev->msix && vdev->msix->table_bar == nr) { >>> + size = vdev->msix->table_offset & TARGET_PAGE_MASK; >>> + } >>> + >>> + strncat(name, " mmap", sizeof(name) - strlen(name) - 1); >> >> This could generate an unterminated name if we actually have to cut the >> appended string. You could set name[sizeof(name)-1] = 0. > > strncat adds the terminator, that's why we have the -1 so that there's > space for it. strlen does not include the terminator. Yep, you are right, forget what I said. Jan -- Siemens AG, Corporate Technology, CT RTC ITP SDP-DE Corporate Competence Center Embedded Linux ^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v2 4/4] vfio: Enable vfio-pci and mark supported 2012-08-02 19:17 ` [Qemu-devel] " Alex Williamson @ 2012-08-02 19:17 ` Alex Williamson -1 siblings, 0 replies; 16+ messages in thread From: Alex Williamson @ 2012-08-02 19:17 UTC (permalink / raw) To: aliguori; +Cc: aik, jan.kiszka, qemu-devel, kvm Signed-off-by: Alex Williamson <alex.williamson@redhat.com> --- MAINTAINERS | 5 +++++ configure | 12 ++++++++++++ hw/i386/Makefile.objs | 1 + 3 files changed, 18 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2d219d2..9680d69 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -460,6 +460,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> S: Maintained F: hw/usb* +VFIO +M: Alex Williamson <alex.williamson@redhat.com> +S: Supported +F: hw/vfio* + vhost M: Michael S. Tsirkin <mst@redhat.com> S: Supported diff --git a/configure b/configure index c65b5f6..81108dc 100755 --- a/configure +++ b/configure @@ -143,6 +143,7 @@ attr="" libattr="" xfs="" +vfio_pci="no" vhost_net="no" kvm="no" gprof="no" @@ -489,6 +490,7 @@ Haiku) usb="linux" kvm="yes" vhost_net="yes" + vfio_pci="yes" if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then audio_possible_drivers="$audio_possible_drivers fmod" fi @@ -824,6 +826,10 @@ for opt do ;; --disable-guest-agent) guest_agent="no" ;; + --disable-vfio-pci) vfio_pci="no" + ;; + --enable-vfio-pci) vfio_pci="yes" + ;; *) echo "ERROR: unknown option $opt"; show_help="yes" ;; esac @@ -1112,6 +1118,8 @@ echo " --disable-guest-agent disable building of the QEMU Guest Agent" echo " --enable-guest-agent enable building of the QEMU Guest Agent" echo " --with-coroutine=BACKEND coroutine backend. Supported options:" echo " gthread, ucontext, sigaltstack, windows" +echo " --disable-vfio-pci disable vfio pci device assignement support" +echo " --enable-vfio-pci enable vfio pci device assignment support" echo "" echo "NOTE: The object files are built at the place where configure is launched" exit 1 @@ -3072,6 +3080,7 @@ echo "OpenGL support $opengl" echo "libiscsi support $libiscsi" echo "build guest agent $guest_agent" echo "coroutine backend $coroutine_backend" +echo "VFIO PCI support $vfio_pci" if test "$sdl_too_old" = "yes"; then echo "-> Your SDL version is too old - please upgrade to have SDL support" @@ -3754,6 +3763,9 @@ case "$target_arch2" in *) echo "CONFIG_NO_XEN=y" >> $config_target_mak esac +if test "$vfio_pci" = "yes" -a "$target_softmmu" = "yes" ; then + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak +fi case "$target_arch2" in i386|x86_64|ppcemb|ppc|ppc64|s390x) # Make sure the target and host cpus are compatible diff --git a/hw/i386/Makefile.objs b/hw/i386/Makefile.objs index 8c764bb..a2783ef 100644 --- a/hw/i386/Makefile.objs +++ b/hw/i386/Makefile.objs @@ -11,5 +11,6 @@ obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen-host-pci-device.o obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pt.o xen_pt_config_init.o xen_pt_msi.o obj-y += kvm/ obj-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o obj-y := $(addprefix ../,$(obj-y)) ^ permalink raw reply related [flat|nested] 16+ messages in thread
* [Qemu-devel] [PATCH v2 4/4] vfio: Enable vfio-pci and mark supported @ 2012-08-02 19:17 ` Alex Williamson 0 siblings, 0 replies; 16+ messages in thread From: Alex Williamson @ 2012-08-02 19:17 UTC (permalink / raw) To: aliguori; +Cc: aik, jan.kiszka, qemu-devel, kvm Signed-off-by: Alex Williamson <alex.williamson@redhat.com> --- MAINTAINERS | 5 +++++ configure | 12 ++++++++++++ hw/i386/Makefile.objs | 1 + 3 files changed, 18 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 2d219d2..9680d69 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -460,6 +460,11 @@ M: Gerd Hoffmann <kraxel@redhat.com> S: Maintained F: hw/usb* +VFIO +M: Alex Williamson <alex.williamson@redhat.com> +S: Supported +F: hw/vfio* + vhost M: Michael S. Tsirkin <mst@redhat.com> S: Supported diff --git a/configure b/configure index c65b5f6..81108dc 100755 --- a/configure +++ b/configure @@ -143,6 +143,7 @@ attr="" libattr="" xfs="" +vfio_pci="no" vhost_net="no" kvm="no" gprof="no" @@ -489,6 +490,7 @@ Haiku) usb="linux" kvm="yes" vhost_net="yes" + vfio_pci="yes" if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then audio_possible_drivers="$audio_possible_drivers fmod" fi @@ -824,6 +826,10 @@ for opt do ;; --disable-guest-agent) guest_agent="no" ;; + --disable-vfio-pci) vfio_pci="no" + ;; + --enable-vfio-pci) vfio_pci="yes" + ;; *) echo "ERROR: unknown option $opt"; show_help="yes" ;; esac @@ -1112,6 +1118,8 @@ echo " --disable-guest-agent disable building of the QEMU Guest Agent" echo " --enable-guest-agent enable building of the QEMU Guest Agent" echo " --with-coroutine=BACKEND coroutine backend. Supported options:" echo " gthread, ucontext, sigaltstack, windows" +echo " --disable-vfio-pci disable vfio pci device assignement support" +echo " --enable-vfio-pci enable vfio pci device assignment support" echo "" echo "NOTE: The object files are built at the place where configure is launched" exit 1 @@ -3072,6 +3080,7 @@ echo "OpenGL support $opengl" echo "libiscsi support $libiscsi" echo "build guest agent $guest_agent" echo "coroutine backend $coroutine_backend" +echo "VFIO PCI support $vfio_pci" if test "$sdl_too_old" = "yes"; then echo "-> Your SDL version is too old - please upgrade to have SDL support" @@ -3754,6 +3763,9 @@ case "$target_arch2" in *) echo "CONFIG_NO_XEN=y" >> $config_target_mak esac +if test "$vfio_pci" = "yes" -a "$target_softmmu" = "yes" ; then + echo "CONFIG_VFIO_PCI=y" >> $config_target_mak +fi case "$target_arch2" in i386|x86_64|ppcemb|ppc|ppc64|s390x) # Make sure the target and host cpus are compatible diff --git a/hw/i386/Makefile.objs b/hw/i386/Makefile.objs index 8c764bb..a2783ef 100644 --- a/hw/i386/Makefile.objs +++ b/hw/i386/Makefile.objs @@ -11,5 +11,6 @@ obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen-host-pci-device.o obj-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pt.o xen_pt_config_init.o xen_pt_msi.o obj-y += kvm/ obj-$(CONFIG_SPICE) += qxl.o qxl-logger.o qxl-render.o +obj-$(CONFIG_VFIO_PCI) += vfio_pci.o obj-y := $(addprefix ../,$(obj-y)) ^ permalink raw reply related [flat|nested] 16+ messages in thread
end of thread, other threads:[~2012-08-14 20:33 UTC | newest] Thread overview: 16+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-08-02 19:17 [PATCH v2 0/4] VFIO-based PCI device assignment for QEMU 1.2 Alex Williamson 2012-08-02 19:17 ` [Qemu-devel] " Alex Williamson 2012-08-02 19:17 ` [PATCH v2 1/4] Update kernel header script to include vfio Alex Williamson 2012-08-02 19:17 ` [Qemu-devel] " Alex Williamson 2012-08-02 19:17 ` [PATCH v2 2/4] Update Linux kernel headers Alex Williamson 2012-08-02 19:17 ` [Qemu-devel] " Alex Williamson 2012-08-02 19:17 ` [PATCH v2 3/4] vfio: vfio-pci device assignment driver Alex Williamson 2012-08-02 19:17 ` [Qemu-devel] " Alex Williamson 2012-08-14 17:40 ` Jan Kiszka 2012-08-14 17:40 ` [Qemu-devel] " Jan Kiszka 2012-08-14 19:09 ` Alex Williamson 2012-08-14 19:09 ` [Qemu-devel] " Alex Williamson 2012-08-14 20:33 ` Jan Kiszka 2012-08-14 20:33 ` [Qemu-devel] " Jan Kiszka 2012-08-02 19:17 ` [PATCH v2 4/4] vfio: Enable vfio-pci and mark supported Alex Williamson 2012-08-02 19:17 ` [Qemu-devel] " Alex Williamson
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.