Re: [PATCH v3 2/3] Input: add devicetree binding note for egalax_ts

[Hui Wang <jason77.wang@gmail.com>]

Shawn Guo wrote:
> On Wed, Aug 15, 2012 at 06:31:47PM +0800, Hui Wang wrote:
>   
>> The egalax_ts driver needs to get the gpio number of the irq pin,
>> and use this gpio to wake up the controller. So add a note
>> for this change.
>>
>> Signed-off-by: Hui Wang <jason77.wang@gmail.com>
>> ---
>>  .../bindings/input/touchscreen/egalax-ts.txt       |   19 +++++++++++++++++++
>>  1 files changed, 19 insertions(+), 0 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
>>
>> diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
>> new file mode 100644
>> index 0000000..df70318
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt
>> @@ -0,0 +1,19 @@
>> +* EETI eGalax Multiple Touch Controller
>> +
>> +Required properties:
>> +- compatible: must be "eeti,egalax_ts"
>>     
>
> Since we define this in the binding anyway, can we have an corresponding
> .of_match_table in the driver?
>
> Regards,
> Shawn
>
>   
OK, will add it in the driver.

Regards,
Hui.